{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and back up the current system, functions often unsupported by stock recovery images. It is, therefore, often installed when rooting Android devices, although it isn't dependent on a device being rooted to be installed.
Instructions
Download TWRP-3.5.2-RMX182X.img from the download link
Place the file in adb folder
Power off your device
Go to fastboot mode by holding Power and Volume Down buttons
Connect your phone to PC
Flash recovery by typing this command
Code:
fastboot flash recovery TWRP-3.5.2-RMX182X.img
Boot into recovery by typing this command
Code:
fastboot reboot recovery
Requirements
Realme 3i Device
PC with fastboot drivers installed or bugjager in another android device
Recovery image
Download
TWRP-3.5.2-RMX182X.img
What's Working?
Decryption
MTP
Flashing images and zips
Backup and Restore
Wiping and Formating
Everything else
Bugs
None
Tell me if you find any
Sources
Recovery Source : https://github.com/minimal-manifest-twrp/platform_manifest_twrp_omni/tree/twrp-10.0
Device Tree : https://github.com/Maanush2004/android_device_realme_RMX1821/tree/twrp-10.0
Screenshots
Spoiler
Thanks to testers
Spoiler
Their Telegram usernames are given below
HELLINFIX
ct_world
Omkarv
TrueTech21
S11K4M4K4N
supremacy_kraken
azharmansoori22
M.A.P said:
Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and back up the current system, functions often unsupported by stock recovery images. It is, therefore, often installed when rooting Android devices, although it isn't dependent on a device being rooted to be installed.
Instructions
Download TWRP-3.5.2-RMX182X.img from the download link
Place the file in adb folder
Power off your device
Go to fastboot mode by holding Power and Volume Down buttons
Connect your phone to PC
Flash recovery by typing this command
Code:
fastboot flash recovery TWRP-3.5.2-RMX182X.img
Boot into recovery by typing this command
Code:
fastboot reboot recovery
Requirements
Realme 3i Device
PC with fastboot drivers installed or bugjager in another android device
Recovery image
Download
TWRP-3.5.2-RMX182X.img
What's Working?
Decryption
MTP
Flashing images and zips
Backup and Restore
Wiping and Formating
Everything else
Bugs
None
Tell me if you find any
Sources
Recovery Source : https://github.com/minimal-manifest-twrp/platform_manifest_twrp_omni/tree/twrp-10.0
Device Tree : https://github.com/Maanush2004/android_device_realme_RMX1821/tree/twrp-10.0
Screenshots
Spoiler
View attachment 5423575View attachment 5423579View attachment 5423581View attachment 5423583View attachment 5423585
Thanks to testers
Spoiler
Their Telegram usernames are given below
HELLINFIX
ct_world
Omkarv
TrueTech21
S11K4M4K4N
supremacy_kraken
azharmansoori22
Click to expand...
Click to collapse
I have done all the process mentioned above , But I can't enter on recovery mode by pressing keys on my realme 3i rmx1827 ( android 10) c22 . Even I do recovery with fastboot tool "fastboot reboot recovery" it's the only way working for me to go to recovery mode on stock recovery. Help
RebootNinja said:
I have done all the process mentioned above , But I can't enter on recovery mode by pressing keys on my realme 3i rmx1827 ( android 10) c22 . Even I do recovery with fastboot tool "fastboot reboot recovery" it's the only way working for me to go to recovery mode on stock recovery. Help
Click to expand...
Click to collapse
You can only access recovery using vol keys and power key combination when your bootloader is locked. When your bootloader is unlocked, the key combination won't work. You can either go to recovery from rom directly using the advanced reboot option or use fastboot.
Related
i was follow the youtube try to flash twrp by the flashify! And I think i flash it to boot not recovery so now it will boot to twrp not OS! How could i fix this? I am new here please tell me the link or sth could be great help :good::good::good:
Thxx
Have you tried using the stock recovery images? They come with instructions for what to do after you unzip it.
finally fix by the rom in here http://forum.xda-developers.com/shi...k-recovery-images-ota-library-guides-t2988881
and the guide
SHIELD TABLET RECOVERY IMAGE FLASHING INSTRUCTIONS
To follow the instructions in this guide, you will need adb and fastboot.
These tools are provided as part of the Android SDK:
http://developer.android.com/sdk/index.html
Before flashing this recovery image to your SHIELD TABLET, connect your SHIELD TABLET
via USB to the PC where you downloaded this recovery image.
Next, put your SHIELD TABLET into fastboot mode using one of the following methods:
SW method:
- Boot to android home screen
- Connect the device to linux/windows system
- Open terminal (on linux); command prompt (on windows).
- Type "adb reboot bootloader" in terminal/command prompt
HW method:
- Turn off the device
- Press "Volume Down" -> "Power", hold "Volume Down" and leave Power buttons till device boots
To flash this recovery image to your SHIELD TABLET, run the following commands from
the directory where you extracted the recovery image package. If this is the
first time you have done this procedure, you must unlock the bootloader (see
below):
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash userdata userdata.img
fastboot flash staging blob
fastboot flash dtb tegra124-tn8-p1761-1270-a04-e-battery.dtb
Unlocking the Bootloader
Your SHIELD TABLET may have shipped with a locked bootloader. To update the device,
you must unlock the bootloader using the following:
- fastboot oem unlock
- Press the "Volume Down" button to select "Unlock bootloader" option on device
- Press the "Power" button to confirm the unlock. Your device's bootloader is now unlocked.
tleung927 said:
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
As long as you can get into the boot loader you can always flash the recovery with fastboot in CMD via a PC just need to specify what recovery file you want flashed
Power off the tablet.
Hold the power and volume down buttons till it comes to the boot loader.
Press volume down till you highlight fastboot protocol & press the power button.
(You will need google USB Drivers and ADB for this part)
Then with the tablet connected to the PC via USB and open command prompt with Admin privileges cd to the folder where you extracted ADB. (I put mine in the root of the C: Drive in a folder called ADB) with the TWRP img you downloaded in the ADB folder type "Fastboot flash recovery twrp-2.8.7.1-shieldtablet.img" Without quotes into the Command prompt. (twrp-2.8.7.1-shieldtablet.img is what you would type given you were using that TWRP img)
this will show up.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now your recovery is flashed!
You can then press volume down to highlight the recovery mode on the shield and press power to boot recovery... Flash your favorite rom following its instructions, Make money, Get rich!
NOA H5 Custom Recovery (NOA H5 CWM-6.0.5.1)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How to root and flash recovery:
Download SuperSU zip on your phone http://download.chainfire.eu/supersu-stable
Download Supersu from Play Store
Unlock bootloader by going to settings > About phone > press 8 times the build-number > go back to settings to developer settings > Enable OEM Loader unlock
Turn off phone
Hold VOL UP + Power
Press vol up to navigate and press vol down select.
Select [Fastboot mode]
Connect to USB 2.0 connection and your phone.
Hold Shift and right click in the NOA_H5_CWM-6.0.5.1 folder and click on open command prompt here (CMD)
Type "fastboot devices" (Do not type the "") to see if it's connected correctly.
Type "fastboot oem unlock" (Do not type the "") and press Vol up on the phone to confirm
Type "fastboot flash recovery cwmnoah5.img" (Do not type the "")
type "fastboot reboot-bootloader" (Do not type the "")
turn off phone
Hold VOL UP + Power
navigate to recovery and press vol down.
Flash the zip Supersu you downloaded
reboot
Start Supersu to see if you need to update anything.
Root apps to use for example are ad blockers like Ad away
https://f-droid.org/repository/browse/?fdid=org.adawa
L Speed [ROOT] and Greenify from the Play Store.
Download: https://drive.google.com/open?id=0B3MsXXAIV_HOaFpfaXNWanBaMU0
Stock recovery.img is included for backup needs.
Hello, I have this device from another retailer, it has Marshmallow on top and when I flash this image the device bootloops. Is there any way to help me build CWM or TWRP for my device running 6.0? Thank you in advance.
PS: I can send any img file (system,recovery,boot) I have the complete package to flash it with SP Flashtool.
mhnx said:
Hello, I have this device from another retailer, it has Marshmallow on top and when I flash this image the device bootloops. Is there any way to help me build CWM or TWRP for my device running 6.0? Thank you in advance.
PS: I can send any img file (system,recovery,boot) I have the complete package to flash it with SP Flashtool.
Click to expand...
Click to collapse
Try to find the full image and flash the original MM recovery via spflash.
pr0x2 said:
Try to find the full image and flash the original MM recovery via spflash.
Click to expand...
Click to collapse
I already had the room so it wasn't a problem, I just did port the cwm with the guide on a site and it worked. Thank you anyway. I am trying to do a TWRP port on my device but my touch panel does not work. Any suggestions?
mhnx said:
I already had the room so it wasn't a problem, I just did port the cwm with the guide on a site and it worked. Thank you anyway. I am trying to do a TWRP port on my device but my touch panel does not work. Any suggestions?
Click to expand...
Click to collapse
I don't know. Do you have the full MM rom zip? My phone is still on 5.1.
Well, I do have it but your phone will have excessive battery drain while wifi is on. I'm trying to fix it but I think the problem is the wifi driver. And it will have the company's applications. I can send you the image but we have to keep it secret because I will be fired from the company. If you want I can make a pre rooted ROM to flash with cwm. The device has thousands of wakeups from the wifi Android system UI.
mhnx said:
Well, I do have it but your phone will have excessive battery drain while wifi is on. I'm trying to fix it but I think the problem is the wifi driver. And it will have the company's applications. I can send you the image but we have to keep it secret because I will be fired from the company. If you want I can make a pre rooted ROM to flash with cwm. The device has thousands of wakeups from the wifi Android system UI.
Click to expand...
Click to collapse
Hmmm better keep it on 5.1 then. I have the full original factory image for 5.1 if you need it.
Note: This only works on Marshmallow version of official Yunicorn firmware. DO NOT FLASH ON LOLLIPOP.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and backup the current system, which are often unsupported by stock recovery images. It is, therefore, often installed when rooting Android devices, although it isn't dependent on a device being rooted to be installed.
Procedure:
First make sure you have installed proper drivers on your PC, then follow the flashing procedure.
1. Download and extract SP Flash Tool.
2. Download twrp-recovery.zip.
3. Open and run "flash_tool.exe" as administrator from Sp Flash Tool folder.
4. Click on the scatter loading button and select the scatter file from the twrp-recovery folder.
5. Click on download button and connect your smartphone to PC via USB cable and wait for the flashing process it will take 20-30 seconds.
Note: Switch off your smartphone before connecting to your PC then connect and do not interrupt the flashing process.
6. Boot into recovery by pressing VOL UP + POWER button.
7. Flash Latest Magisk Module (Prefer this for root over SuperSU)
8. Wipe Dalvik Cache and reboot the system.
Now, you have successfully installed TWRP on your mobile.
BUGS
- You tell me
Which version of twrp is this ......
got stuck in bootloop.........
plz help:crying::crying::crying::crying:
hateis said:
Which version of twrp is this ......
Click to expand...
Click to collapse
TWRP 3.0.2
tariqr said:
got stuck in bootloop.........
plz help:crying::crying::crying::crying:
Click to expand...
Click to collapse
Please follow given instructions. Look at step 6,7 and 8. You will have to flash Magisk or SuperSu and wipe Dalvik Cache before booting system.
Thank you so much....
arun483 said:
Note: This only works on Marshmallow version of official Yunicorn firmware. DO NOT FLASH ON LOLLIPOP.
Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and backup the current system, which are often unsupported by stock recovery images. It is, therefore, often installed when rooting Android devices, although it isn't dependent on a device being rooted to be installed.
Procedure:
First make sure you have installed proper drivers on your PC, then follow the flashing procedure.
1. Download and extract SP Flash Tool.
2. Download twrp-recovery.zip.
3. Open and run "flash_tool.exe" as administrator from Sp Flash Tool folder.
4. Click on the scatter loading button and select the scatter file from the twrp-recovery folder.
5. Click on download button and connect your smartphone to PC via USB cable and wait for the flashing process it will take 20-30 seconds.
Note: Switch off your smartphone before connecting to your PC then connect and do not interrupt the flashing process.
6. Boot into recovery by pressing VOL UP + POWER button.
7. Flash Latest Magisk Module (Prefer this for root over SuperSU)
8. Wipe Dalvik Cache and reboot the system.
Now, you have successfully installed TWRP on your mobile.
BUGS
- You tell me
Click to expand...
Click to collapse
Is it stable and perfect...
How to unlock bootloader...
Any custom ROM build available...
New forum for rom development and porting for yu5530
https://forum.xda-developers.com/remix/supported-devices/yu-yunicorn-5530-t3735023
jowinjohnchemban said:
Is it stable and perfect...
How to unlock bootloader...
Any custom ROM build available...
Click to expand...
Click to collapse
Yes it is perfectly stable.
I don't think bootloader is locked, I don't remember, it's been a while since I used this device.
No custom roms are available as far I know.
[/COLOR @arun483
Could you please port new version of twrp (TWRP 3.2.3-0) for this device.
YU Yunicorn 5530
Android Marshmallow
Also Please post instructions for porting twrp for this device.
TeamWin Recovery Project 3.2.3
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WARNING #1: Unlocking BL and flashing a custom recovery voids your warranty. Please make sure to contact your carrier/seller if your phone is still under warranty after unlocking the bootloader.
WARNING #2: Make sure you have enabled OEM unlock and unlocked bootloader before trying to flash this. How you can successful root and install TWRP will be described below.
WHAT IS TWRP?
Oh come on, you know what it is - don't try to fool me!
In case you're serious, though...
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
HOW-TO UNLOCK BOOTLOADER
1. Get bootloader Unlock code here
2. Install minimal adb and fastboot
3. Plug in your phone and make sure all huawei drivers got installed
4. Enable developer options in settings as described above.
5. Enable OEM unlock, enable USB debugging (both in developer options)
6. Open the adb tool you installed recently
7. Type fastboot devices (now a device number should show up)
8. Type fastboot reboot-bootloader (your phone will now boot into bootloader, if not, you haven't set up drivers or adb/fastboot correctly)
9. This step will wipe all your data! Type:
Code:
Code:
fastboot oem unlock xxxxxxxxxxxxxxxx
(xx is for your unlock code)
10. Ones it's done type:
Code:
Code:
fastboot reboot
Your phone will reboot and you have an unlocked bootloader!
11. You can now go on installing TWRP on your device
HOW-TO INSTALL
Make sure you enabled OEM unlock in settings, if you haven't please do that now by tipping 10 times on build number (to activate developer options), than open developer options and go to OEM unlock, enable it
Have an unlocked bootloader is required! (In my case, I login the unlocker website at provide necessary information and get the unlock code so try yourself !!!)
Download the TWRP recovery from the download section below
Make sure you got fastboot drivers installed (I will describe this below in how to unlock your bootloader)
Open the adb/fastboot application on your pc and go to the directory where your TWRP img file is downloaded
Boot your phone into download mode (First method: fastboot reboot-bootloader while connected to pc. Second method: power off your phone, hit power on and volume down until it boots to download mode)
Check again if there is written: unlocked phone!
If yes type now into your adb/fastboot terminal:
Code:
fastboot flash recovery twrp-3.2.3-0-CRO_U00.img
Click to expand...
Click to collapse
Type:
Code:
Code:
fastboot reboot
Now boot into recovery by pressing: power+volume up+volume down at the same time
Enjoy twrp
HOW-TO ROOT
Backup, just in case
Have an unlocked bootloader and TWRP installed from above (take one from december)
We will use this root method: Phh's superuser
Download latest official phh superuser zip here.
Put the zip on your external sd card of your phone (since we can't access /data in twrp)
Boot into twrp and flash the downloaded file
Install latest Material phh apk: Release post
Now you are rooted, congrats!
SUPPORTED DEVICES
CRO-U00
HWCRO-U6580M
(Test your Device, if you want to take the risk )
Official Release Link : https://twrp.me/huawei/huaweiy32017.html
DOWNLOAD
Updated Link Shared In Next Post.
Contributors
Omni 5.1.1 Minimal Twrp Source
Ubuntu 16.04
Google
HWDEV
****
More Information Given Later
[Reserved Post]
Thank you !
Thank you buddy. Though the link you mentioned for DOWNLOAD is no longer available, but I found one in the Official Release Link. :good:
key
Hello Guys! Its Sarthak Roy here,
Actually I am the mod/admin of Realme C3 telegram group. Recently many of them had tried to relock the bootloader without asking me the process and got bricked. So, I thought to make a tutorial for Relocking Bootloader of Realme MTK based devices.
STEP 1: Download the unlock tool again to apply to exit the in-depth test.
STEP 2:Click “Apply to exit in-depth test”. You should manual operation enter the Fastboot mode(Press both the Volume down button and the Power button when power is off).
STEP 3:In the fastboot mode, use the engineering command below on your PC to re-lock the bootloader.
- Enter the command: fastboot reboot bootloader
- Press “Enter” on your keyboard
- Enter the command: fastboot flashing lock
- Press “Enter” on your keyboard
STEP 4: Press the Volume Up button to select the “Lock bootloader” option (or press the Volume Down button to select “Do not lock bootloader" and keep it unlocked).
STEP 5: Then enter command "fastboot reboot”. The phone will reboot and exit the in-depth test mode.
[PS: All user data on the phone will be erased - we recommend you perform a data backup prior to applying.]
Hope you guys understand the steps. If you got any query, feel free to ask me anytime.
Thanks and Bye
Reserved
i flashed the pbrp recovery to my phone without root through fastboot .but i am not able to go in to recovery neither through key combination nor through fastboot .so if i lock my bootloader my custom recovery will be their in the phone .also my phone is not rooted . i can access the adb through the pc but can not access the fastboot so i tried bugjaeger to access fastboot but bugjaeger does not support the fastboot reboot recovery command . what shoul i do
i dont have the stock recovery for rmx2027 .if i get it i will flash that and lock the bootloader
ashwin_tembhekar said:
i flashed the pbrp recovery to my phone without root through fastboot .but i am not able to go in to recovery neither through key combination nor through fastboot .so if i lock my bootloader my custom recovery will be their in the phone .also my phone is not rooted . i can access the adb through the pc but can not access the fastboot so i tried bugjaeger to access fastboot but bugjaeger does not support the fastboot reboot recovery command . what shoul i do
Click to expand...
Click to collapse
Use "adb reboot recovery" when phone is powered on
and use "fastboot reboot recovery" in fastboot mode
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
can anyone help?