Database Info

[Guide] Step by Step Installation of Android Pie Custom Roms

Step by Step Installation of/Upgrade to Android Pie Custom Roms
Following this guide, you will lose all your data if haven't backed it up yet!!
Also NO USING GSI PIE!!!
Requirements:
- Twrp is already installed.
What you need:
- LineageosTWRP (Attached to thread)
- Custom Rom (can be found here)
- Open Gapps (Pico or Nano)
Only if Root is wanted: Chose either of them
Magisk(Recommended) or SuperSU
- A brain and a body
- The Knowledge that you will wipe your phone by doing this. Be Warned.
Installation:
1. Backup all the files that you have either by copying them to a usb drive ,a micro SD or your computer.
2. Check that all files are copied successfully and can be opened or viewed.
( Some apps have a cloud synchonisation feature, use it if you have it as an option since it is really helpful!)
3. Now, get your preferred rom, gapps and if wanted, your root method ready, also unzip the twrp file aswell.
Copy them to your micro SD.
4. Boot into twrp via adb or by using some app(root needed).
In Twrp, go into wipe option, then select change file system. Change file System to ext4.
4.1 Now use Twrp Reboot-Menu Option to reboot into recovery(twrp) again.
4.2 Wipe system, data, cache and dalvik-cache partitions using the Wipe option
5. Go into Install Option and Press on "Install IMG" , select pietwrp image and flash it. (The name should be lineagerecovery.img or something if downloaded via telegram)
(If you don't have it yet and are in the Lenovo P2 Telegram group, type #pietwrp in chat and make sure to safe it to your download folder. Otherwise it's also attached to this thread.)
6. Reboot back to recovery like you did in step 4.1.
7. Now install your rom and gapps.
8. Wipe cache and then reboot .
9. Setup your phone and Enjoy.
( For Root, reboot to recovery. Flash your Root Method, wipe cache and reboot)
Enjoy and thank your Devs
FAQ
Q: Instructions unclear, phone stuck in bootloop
A: Either do this:
Download this folder and use one of the two ".bat" files. Boot into Bootloader via Volume Down and Power Button. --
It will flash S048 Firmware of our Lenovo P2, after the flash-process is finished it will boot up on its own. Recommended: Do all the ota updates via ota app.
Or: Boot into bootloader, via adb cmd prompt use: fastboot boot lineagerecovery.img , then use reboot menu to reboot into twrp. Clean Wipe phone(Wipe system,data, cache and dalvik-cache Partitions) and try flashing your Rom etc. again.
Q: Instructions unclear, hardbricked my phone!!
A: Thaat shouldn't have happened. Did you screw up somewhere?...
Luckily you backed up your most important files!

How To Guide GSI Installation Guide for Realme C2

Requirement:
Gsi Download arm64-ab or bvN (on some download page)
For ColorOs Base
Twrp COS
Gsi Flash files
Stockboot.img
For RealmeUi Base
Twrp RMUI
Gsi Flash files
Stockboot.img
Installation
1.Reboot to Twrp
2.Factory reset device from Wipe >> Slide>>>
3.Format data from Wipe >> Format data>> Type Yes
4.Flash RMC2decryption.zip
5.Go to Advance wipe & wipe
dalvik, data, cache, internal storage & system
Do Not Wipe Vendor partion
6. Goto install & select install image from bottom right
7. Flash stockboot.img as boot
8. Flash (gsi filename).img as system image
9.Flash vbmeta.img as vbmeta (Download as per base)
10.Flash Deletebootanimation.zip (Read Note First)
11.Flash keystore.zip
12.Format data from wipe bottom right
13.Flash permissiver.zip (skip for RMUI)
14.Reboot System
Note:
only some gsi boot with bootanimation if device bootloop from bootanimation flash deletebootanimation.zip
if deletebootanimation.zip doesnt work delete file manually
System/system/media or system/system/product/media
Optional
For Root flash Magisk 20.3
(in phh based gsi Normal magisk.zip doesn't works)
Rooting on Android 11
make sbin folder in /system & /system_root/system then flash magisk zip
For discussion join
https://t.me/RealmeC2Community
For Gsi Fix follow #gsifix
For Modified Bootanimation #gsibootanimation

realme c2 color os v9.
what will I press in the last step 'do not install twrp' or 'reboot system' only ??

GSI AOSP Android 10
I've tried to open the GSI list you provided.
And I got confused which one do I have to download/pick and which file.
Do you have any recommendations for Android 10 stock AOSP?
Thanks in advance.
Cheers. :fingers-crossed:

Rj clno said:
what will I press in the last step 'do not install twrp' or 'reboot system' only ??
Click to expand...
Click to collapse
always do not install twrp app
Shinnosuke Nohara said:
I've tried to open the GSI list you provided.
And I got confused which one do I have to download/pick and which file.
Do you have any recommendations for Android 10 stock AOSP?
Thanks in advance.
Cheers. :fingers-crossed:
Click to expand...
Click to collapse
arm64 a/b or arm64 bvn/bgn v=vanilla g=gapps

I’ve downloaded the arm64 a/b gapps and go. I’ll try it later. Then I will tell you if I find any bugs and then upload the logs. Where should I upload it?

I am using :
system-roar-arm64-ab-gapps.img from here
TWRP 3.5.0_9-1 SIDDK
ColorOS GSI
adb version Version 30.0.5-6877874
I can't make it run. It loops in opening screen RealmeME (white logo) not Yellow font..
I still can boot to fast-boot mode and call twrp recovery.
Somebody can help me?
many thanks in advance

hey i am using the stock color os 9 on my rmx1943 it similar to rmx1945 yiu think i could use the old stockboot file for it on sourceforge

i'm getting an error whenever i'm trying to flash keystore for rmui. what should i do @Siddk

patrickbusto081302 said:
i'm getting an error whenever i'm trying to flash keystore for rmui. what should i do @Siddk
Click to expand...
Click to collapse
everything fine with keystore make sure u using latest recovery & using A10 keystore

Ahh...booting into recovery even if i press system

@arksolitude is that because you are trying to install android 10 for realme c2? if yes...
1. download stockrecovery.img (or get the recovery.img from the zip file you've downloaded)
2. reboot to bootloader/fastboot
3. type in your computer "fastboot flash recovery (name of the file).img"
4. reboot (this will take you to stock recovery)
5. wipe data and reboot
this is from my experience but this should work

[Guide]Make[10or.E][Treble Support][06 Oct]

10or.E 1 GB Vendor Partition tutorial
So,this post is about how you can make your 10or device treble support for installing custom roms and gsi.
Before reading this post make sure you have unlocked the bootloader and installed any custom recovery(if you have not then go to this forum
So,now lets come back to the topic...
Requirements
- 1GB Vendor Parition zip Download
- Treble Supported Orange Fox Download
- and a working Mind
Now the process, but befofe starting the process **make sure you have taken complet backup because internal storage will be completely wiped out**And I'am not responsible for any device brick
Now lets start:
-First reboot to your recovery and install the treble supported Orange Fox Recovery.
(if you dont find recovery your recovery in download location just select install image)
-After you have successfully flash the treble orange fox just boot into that recovery and
-install the 1GB-Vendor.zip file then the file is talented it will ask if you want to create vendor partition.
-Just click the volume rockers and select yes
-Then it will ask from where you want to take space **select DATA PARTITION** not system
-Then select END data partiton
-Then select **1024mb size** and select **AFTER**
-Then it will ask to format data, Just select "YES" and reboot to recovery
-Then go to MENU-->Manage Partitions-->Vendor-->Change FS-->then change it to EXT4
-After that again come back to MENU-->Manage Partitions-->data-->then just format you data
-And Finally You Will Have Successfully Created 1GB Vendor Partition...
@Arghya Biswas

How to flash Android 12 Beta 5 gsi on devices with (A only type, A/B type, Dynamic) Partitions

You can check type of your device Partition using this APP
For Devices with A only type Partition:-(TWRP must be installed for A type and A/B type devices)
1. Download A only type GSI (if available) (if not try with A/B Type GSI)
2. Download Android 11 Custom rom (device specific)(AICP Recommended)
3. Boot into TWRP
4. Wipe Dalvic, System, Data, Cache, Vendor, Internal storage(optional)
5. Move Android 11 Custom rom & GSI to internal storage of device
6. Flash Android 11 Custom rom
7. Flash MakeMeSAR zip ( only when using A/B type GSI)
8. Then flash GSI to "system image" partition
9. Reboot to system
if not booting then try with different Android 11 Custom rom (device specific)
*****if confused watch this video by clicking here ******
For Devices with A/B type Partitions:- (TWRP must be installed for A type and A/B type devices)
1. Download A/B type GSI
2. Download Android 11 Custom rom (device specific)(AICP Recommended)
3. Boot into TWRP
4. Wipe Dalvic, System, Data, Cache, Vendor, Internal storage(optional)
5. Move Android 11 Custom rom & GSI to internal storage of device
6. Flash Android 11 Custom rom
7. Change slot to opposite slot (If A change it to B) (If B change it to A)
8. Reboot to Recovery
9. Then flash GSI to "system image" partition
10. Reboot to system
if not booting then try with different Android 11 Custom rom (device specific)
*****if confused watch this video by clicking here ******
For Devices with Dynamic Partitions:- (Twrp not needed but must be on Android 11)
1. Enable developer options
2. click on option called DSU Loader and you will be given 2 options
3. Select what ever package you like to
4. Wait for installation
5. Reboot Option will be given via notification
6. Click Reboot
*****if confused watch this video by clicking here ******

Makemesar not working. Honor 6X here

A12s Exynos 850 Development A127f Android 12 Recoveries

Orange Fox v2
From @
Modified by physwizz for a12s(a127f) S
Android 12
Installation
Post #3
@physwizz

Afaneh TWRP modified by physwizz
For a12s S
Installation
Post #3
@physwizz

Installing Custom Recoveries Exynos 850
Recommended to use Orange Fox to format and TWRP to install GSIs
1. Install Orange Fox
2. Decrypt the data (Format and run multidisabler twice)
3. Reboot to recovery (not just reboot)
4. Install TWRP recovery.img into recovery partition.
5. Reboot to recovery.
Extract recovery.img from tar file
Method 1.
If you have already installed recovery and decrypted.
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to recovery
(For Pitch-black just install the zip)
Method 2.
1. Download firmware
2. Extract ap file.
3. Patch with special magisk
4. Flash with Odin
5. Download recovery.img
6. Install TWRP app
7. Install TWRP
8. Choose file to flash.(don't select device)
9. Select recovery.img.
10. Reboot to recovery.
Go to part B
Method 3.
1. Download recovery tar
2. Connect phone to PC
3. Go to Download mode
4. Flash recovery tar into ap with Odin
Part B (You may need to change data partition to ext4 first if format ruins your system)
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
11.Reboot to recovery
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
Recovery Problems
Most recovery issues can be solved by attending to the following issues.
1. Did you root using the full ap file patched with the special a217 magisk? (This contains the patched boot.img and vbmeta.img)
2. Did you then go all the way through the setup process?
3. Did you download the recovery to match your baseband?
https://t.me/a127f_res/54
4. Did you hold down power and volume up after Odin says pass?
5. Did you format data, not just wipe?
6. Did you type multidisabler twice?
7. Did you reboot to recovery by choosing reboot from the menu and then choosing recovery?
@physwizz

Did anybody have trouble installing these recoveries?

physwizz said:
Did anybody have trouble installing these recoveries?
Click to expand...
Click to collapse
No i downgraded to andro11 but mai binari is: fakin 8