Database Info

[Completed] ( CUSTOM ROM ) Galaxy Trend Lite ( S7392L ) ( S7392 ) Finisteu Rom ( 4.1.2 )

FINISTEU ROM S7392L 4.1.2 (431.6 Mb)
PT/
- ROM DEODEXADA
- ROOT POR PADRÃO
- 2 LAUNCHER (NOVA LAUNCHER E XPERIA LAUNCHER)
- SCRIPTS E TWEAKS QUE MELHORAM O DESEMPENHO E FLUIDEZ
- NENHUM TIPO DE BUG
EN/
- DEODEX ROM
- Standard ROOT IN
- 2 Launcher ( Nova Launcher LAUNCHER XPERIA E )
- SCRIPTS AND IMPROVE PERFORMANCE AND flow adjustments
- No TYPE OF ERROR
DOWNLOAD: (mega.nz/#F!zANSHapY!DYfNnfajQ2P3vbvurCY0tQ)
COMO INSTALAR BR-PT:
1) CERTIFIQUE-SE QUE O SEU CELULAR TENHA A ROM PADRÃO JÁ INSTALADA.
2) CERTIFIQUE-SE QUE O SOFTWARE DE USB DA SAMSUNG ESTEJA DEVIDAMENTE INSTALADO.
3) COM O CELULAR DESLIGADO, APERTE VOLUME PARA BAIXO + BOTÃO HOME + BOTÃO POWER. DEPOIS
CONFIRME SEGURANDO O BOTÃO 'VOLUME PARA CIMA' PARA ENTRAR EM MODO "DOWNLOAD".
4) EXTRAIA E ABRA O "Odin v3.10.6.zip"
5) CONECTE O CABO USB EM SEU COMPUTADOR E AGUARDE PARA QUE O "ODIN" RECONHEÇA.
6) COLOQUE O ARQUIVO "CWM (INSTALL AT ODIN)" EM "AP" OU "PDA" MARCANDO A "CAIXA" AO LADO
E DEPOIS CLIQUE EM "START".AGUARDE O PROCEDIMENTO.
7) DEPOIS DE FINALIZADO, MOVA OS ARQUIVOS "CWM.zip (...)" E "FINISTEU ROM" PARA O CARTÃO SD
8) COM O CELULAR DESLIGADO, APERTE VOLUME PARA CIMA + BOTÃO HOME + BOTÃO POWER POR 5 SEGUNDOS.
9) NAVEGUE COM AS TECLAS DE VOLUME ATÉ "INSTALL ZIP FROM SDCARD" E SELECIONE COM O BOTÃO HOME.
10) DEPOIS, NAVEGUE ATÉ "CHOOSE ZIP FROM SDCARD"
11) E SELECIONE O "CWM"
12) DEPOIS DE O "CWM" SER DEVIDAMENTE INSTALADO. REINICIE O DISPOSITIVO NOVAMENTE EM
MODO "RECOVERY" COM VOLUME PARA CIMA + HOME + POWER POR 5 SEGUNDOS.
13) Navegue ate Wipe data/factory reset e vá em yes;
14) Depois Selecione Wipe cache partition e vá em yes;
15) Agora vá até Mounts and storage,e selecione Format/cache,Format/data,Format/sdcard1 e por fim Format/system. (Um por vez)
16) Agora volte e vá Novamente em Wipe data/factory reset e vá em yes;
17) Vá em Wipe cache patition
18) Vá novamente em Mounts and storage e selecione mount/data,mount/sdcard1 e em mount/system. Volte e vá em Install zip from sdcard.
19) Vá em choose zip from sdcard selecione e vá em yes;
20) Selecione a ROM que você baixou;
21) Quando terminar a instalação reinicie o aparelho.
22) E Aproveite a sua ROM
-----------------------------------------------------------
HOW TO INSTALL EN
1) MAKE SURE YOUR PHONE ALREADY HAVE A STANDARD ROM installed.
2) MAKE SURE THAT THE USB SOFTWARE FROM SAMSUNG IS PROPERLY INSTALLED.
3) Off, WITH CELL Press VOLUME DOWN + HOME + BUTTON POWER BUTTON. AFTER
CONFIRM HANDLING THE BUTTON 'VOLUME UP' TO ENTER MODE "DOWNLOAD".
4) EXTRACT AND OPEN THE "Odin v3.10.6.zip"
5) CONNECT THE USB CABLE TO YOUR COMPUTER AND WHAT wait for the "ODIN" RECOGNIZE.
6) PLACE FILE "CWM (INSTALL IN ODIN)" ON "AP" or "PDA" MARKING THE "CASH" NEXT
THEN CLICK "Start" .AGUARDE PROCEDURE.
7) AFTER Finished, MOVE FILES "CWM.zip (...)" E "FINISTEU ROM" FOR SD Card
8) WITH CELL, Off, Press VOLUME UP BUTTON + HOME + POWER button for 5 seconds.
9) SAIL WITH UP TO VOLUME keys "install zip from sdcard" AND WITH SELECT BUTTON HOME.
10) Then navigate to "choose zip from sdcard"
11) AND SELECT "CWM"
12) AFTER THE "CWM" BE PROPERLY INSTALLED. RESTART THE Device Again IN
MODE "recovery" WITH VOLUME UP + HOME + POWER IN 5 seconds.
13) Browse ate Wipe data / factory reset and Go yes;
14) AFTER Select wipe cache partition and Go yes;
15) Now Go Up to Mounts and Storage and select Format / cache, format / data format / sdcard1 and FINALLY Format / system. (One at a time)
16) Now go back and go again to wipe data / factory reset and Go yes;
17) Go to clear cache patition
18) Go Again in Mounts and Storage and select mount / data to mount / sdcard1 in an assembly / system. Go and Come back Install zip from sdcard.
19) Go pick zip from sdcard and select Go yes;
20) Select a lowered ROM que fast you;
21) When the installation restart the apparatus.
22) AND ENJOY YOUR a ROM

XDA Assist is not the place for this.
Please read (again) what XDA Assist should be used for
http://forum.xda-developers.com/showthread.php?t=2764768
Thread closed.

[guide]how to root redmi 2 pro keeping ota updates and stock recovery

Hello, i'm sharing these guides to root Redmi 2/Pro/Prime devices
I've done it in my Redmi 2 Pro with the MI 7.0.5.0 version
Procedures:
1 ) Download the file and place on sdcard ( root folder)
2} Open the Tools folder and click on the " Updates"
3 ) In the Updates screen, click now on °°° icon at the top side (right )
4) Now click Choose update package, find it with file manager on the sdcard and select the file Root_Redmi2_Global.zip ; Wait for the automatic update and device reboot
5 ) Open supersu or visit the notification of the app and the popup window click Continue to perform the update . Then click on Normal maintaining access to stock recovery
6) The device must be rebooted again
7) Open supersu , go to settings and tick the Enable Pro box as shown in the video. Reboot the Supersu and select survival mode now and Enable SU during boot .
Direct File Link:
Credits to Satyajit Ghana for root and video
Portuguese Language:
Code:
[HIDE]Procedimento:
1) Baixe o o arquivo da descrição do video e coloque na raiz do sdcard
2} Abra a Pasta ferramentas e clique no ícone "Atualizações"
3) Na tela de Atualizações clique agora no icone °°° no canto superior(direito)
4) Agora clique em selecionar pacote de atualização e navegue pelo gerenciador de arquivos no sdcard e selecione o arquivo Root_Redmi2_Global.zip ; Aguarde o update automático e o reboot do aparelho
5) Abra o supersu ou acesse a notificação do app e na janela popup clique em Continue para efetuar o update. Em seguida clique no modo Normal mantendo o acesso ao stock recovery
6) O aparelho deverá ser reinicializado novamente
7) Abra o supersu, va em configurações e marque as caixinha Habilitar Pro como indica o video . Reinicialize o Supersu e marque agora modo sobrevivência e Habilitar SU durante o Boot.
Pronto[/HIDE]

How to install Samsung ROM with Heimdall on Linux [Como Instalar Stock Rom da Samsung com Heimdall no Linux]

Mod edit - translated by https://www.deepl.com/translator and thread moved to Android General:
INSTALLING STOCK ROM - SAMSUNG -
HEIMDALL - LINUX
1. Enable USB debugging and put the phone in download mode download mode;
2. Open heimdall in terminal with root access;
<su> enter the password
<sudo heimdall-frontend> to open the program
3. Remove the .PIT file from the "CP" folder. It will be with md5 extension, just change it to .zip, and after extracting, you will find the file;
4. Now on Heimdall, just go to "Flash" and add the .PIT file file found in the previous step.
5. Now you must put all the Stock Rom folders in .zip, because we'll need to extract them;
6. Finished the extraction, you should also extract all the files files from these new folders, because they will be as .lz4;
7. Now, on the "Flash" tab of heimdall, you will go to "Partition Files" on the right side, press "Add", and go to "Partition Name" and go adding the types of files and go inserting the files that you extracted previously.
Note: each type of partition shows the correct name of the file, so just go adding until you have completed all extracted files.
8. Now just check if the device is connected, going in the tab "Utilities" tab, "Detect Device" and click on "Detect"; in case everything is ok everything ok, it will be shown at the bottom, at "output" as "Device Detected";
9. After that, you can go back to the "Flash" tab and click on "Start" on the bottom right corner and wait for the files to finish.
10. To install TWRP, just download the file in .img and do the flash it as "Recovery" partition.
I hope to have helped. I did not find any tutorial about it on the
on the internet. Cheers!
*******************************************
Spoiler: Portuguese Version
INSTALANDO STOCK ROM – SAMSUNG –
HEIMDALL - LINUX
1. Habilitar a depuração USB e colocar o telefone em modo
download;
2. Abrir o heimdall no terminal com acesso root;
<su> inserir a senha
<sudo heimdall-frontend> para abrir o programa
3. Retirar o arquivo .PIT da pasta “CP”. Ela estará com
extensão .md5, basta trocar para .zip, e após extrair, encontrará o
arquivo;
4. Já no Heimdall, basta ir na “Flash” e adicionar o arquivo .PIT
encontrado no passo anterior.
5. Agora deve-se colocar todas as pastas da Stock Rom em .zip,
pois precisaremos extraí-las;
6. Terminado a extração, vocês deverão extrair também todos os
arquivos dessas novas pastas, pois elas estarão como .lz4;
7. Agora, na aba “Flash” do heimdall, vocês irão em “Partition
Files” no lado Direito, vão apertar em “Add”, e ir em “Partition
Name” e irem adicionando os tipos de arquivos e irem inserindo
os arquivos que vocês extrairam anteriormente.
Observação: cada tipo de Partição mostra o nome correto do
arquivo, então basta ir adicionando até terem completado todos os
arquivos extraidos.
8. Agora basta conferir se o aparelho está conectado, indo na aba
“Utilities”, “Detect Device” e apertar em “Detect”; caso esteja
tudo ok, será mostrado na parte de baixo, em “output” como
“Device Detected”;
9. Feito isso, pode voltar para a aba “Flash” e clicar em “Start” no
canto inferior direito e esperar que os arquivos sejam concluidos.
10. Para instalar o TWRP, basta baixar o arquivo em .img e fazer o
flash como partição “Recovery”.
Espero ter ajudado. Não achei nenhum Tutorial sobre isso na
internet. Abraços!!

euzebio22 said:
Mod edit - translated by https://www.deepl.com/translator and thread moved to Android General:
INSTALLING STOCK ROM - SAMSUNG -
HEIMDALL - LINUX
1. Enable USB debugging and put the phone in download mode download mode;
2. Open heimdall in terminal with root access;
<su> enter the password
<sudo heimdall-frontend> to open the program
3. Remove the .PIT file from the "CP" folder. It will be with md5 extension, just change it to .zip, and after extracting, you will find the file;
4. Now on Heimdall, just go to "Flash" and add the .PIT file file found in the previous step.
5. Now you must put all the Stock Rom folders in .zip, because we'll need to extract them;
6. Finished the extraction, you should also extract all the files files from these new folders, because they will be as .lz4;
7. Now, on the "Flash" tab of heimdall, you will go to "Partition Files" on the right side, press "Add", and go to "Partition Name" and go adding the types of files and go inserting the files that you extracted previously.
Note: each type of partition shows the correct name of the file, so just go adding until you have completed all extracted files.
8. Now just check if the device is connected, going in the tab "Utilities" tab, "Detect Device" and click on "Detect"; in case everything is ok everything ok, it will be shown at the bottom, at "output" as "Device Detected";
9. After that, you can go back to the "Flash" tab and click on "Start" on the bottom right corner and wait for the files to finish.
10. To install TWRP, just download the file in .img and do the flash it as "Recovery" partition.
I hope to have helped. I did not find any tutorial about it on the
on the internet. Cheers!
*******************************************
Spoiler: Portuguese Version
INSTALANDO STOCK ROM – SAMSUNG –
HEIMDALL - LINUX
1. Habilitar a depuração USB e colocar o telefone em modo
download;
2. Abrir o heimdall no terminal com acesso root;
<su> inserir a senha
<sudo heimdall-frontend> para abrir o programa
3. Retirar o arquivo .PIT da pasta “CP”. Ela estará com
extensão .md5, basta trocar para .zip, e após extrair, encontrará o
arquivo;
4. Já no Heimdall, basta ir na “Flash” e adicionar o arquivo .PIT
encontrado no passo anterior.
5. Agora deve-se colocar todas as pastas da Stock Rom em .zip,
pois precisaremos extraí-las;
6. Terminado a extração, vocês deverão extrair também todos os
arquivos dessas novas pastas, pois elas estarão como .lz4;
7. Agora, na aba “Flash” do heimdall, vocês irão em “Partition
Files” no lado Direito, vão apertar em “Add”, e ir em “Partition
Name” e irem adicionando os tipos de arquivos e irem inserindo
os arquivos que vocês extrairam anteriormente.
Observação: cada tipo de Partição mostra o nome correto do
arquivo, então basta ir adicionando até terem completado todos os
arquivos extraidos.
8. Agora basta conferir se o aparelho está conectado, indo na aba
“Utilities”, “Detect Device” e apertar em “Detect”; caso esteja
tudo ok, será mostrado na parte de baixo, em “output” como
“Device Detected”;
9. Feito isso, pode voltar para a aba “Flash” e clicar em “Start” no
canto inferior direito e esperar que os arquivos sejam concluidos.
10. Para instalar o TWRP, basta baixar o arquivo em .img e fazer o
flash como partição “Recovery”.
Espero ter ajudado. Não achei nenhum Tutorial sobre isso na
internet. Abraços!!
Click to expand...
Click to collapse
@euzebio22
As courtesy, I've translated your post above and moved the thread to Android General. With reference to rule no. 4 of the XDA Forum Rules, please post in English or add at least an English translation to your Portuguese posts. Thanks for your cooperation!
Spoiler: Rule No. 4
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
Regards
Oswald Boelcke
Senior Moderator

Question Oneplus 9 CN version first steps

Hi all,
I've been reading a lot before creating this post and still have doubts.
I have a Oneplus 9 CN version that came with Global ROM, I want to root it and be able to update it with OTA, as I've been doing with My OP6T.
Do I have to unlock bootloader first? How?
ROMs of EU/Global version are valid for CN Version?
Thanks

yeah super simple bro, same phone i Got

First, go to about phone, click on Build Number 7 Times.
Then back to System > Developer Options, click the OEM Unlocking Tab, also scroll down and click the USB Debugging tab.
then to your computer, make sure you have ADB and Fastboot program installed.
- SDK Platforms.
Then go to the folder or if you have ADB installed. Click the "path" bar and tyif pe CMD and hit enter
your command prompt will no open. Connect the phone to the computer.
Type
- adb devices
if it shows your device, were good and connected. It will show a prompt, "Allow Devices" click allow always.
now you need to Download "twrp.img" from the twrp website. also download the latest Magisk and put both files into the Platforms folder or wherever you download ADB and Fastboot.
once you have that done.
go back to your command window.
type
- adb reboot bootloader
now we are in fastboot mode
type
- fastboot boot twrp.img
it will boot into TWRP recovery.
go to Advanced tab, click Flash current TWRP
now go back to advanced and click ADB Sideload
now back to command window
type
- adb sideload Magisk2022.zip "or whatever you have it named.
it will flash Magisk, once that is done, you are Bootloader Unlocked and Now Rooted.
open the app on the phone and follow the prompts. click updates if it says update on both
always do "direct install" on the first one. Unless you do an update of some sort. Then you do "inactive slot"
any other questions brother, feel free to holler at me. Hope this helps. Hope you got the 12GB/256GB phone.
Many blessings

illusiveairforce said:
Primeiro, vá para sobre o telefone, clique em Build Number 7 Times.
Em seguida, volte para Sistema> Opções do desenvolvedor, clique na guia Desbloqueio OEM, role para baixo e clique na guia Depuração USB.
em seguida, para o seu computador, certifique-se de ter o programa ADB e Fastboot instalado.
- Plataformas SDK.
Em seguida, vá para a pasta ou se você tiver o ADB instalado. Clique na barra "path" e tyif pe CMD e pressione enter
seu prompt de comando não será aberto. Conecte o telefone ao computador.
Tipo
- dispositivos adb
se mostra seu aparelho, estava bom e conectado. Ele mostrará um prompt, "Permitir dispositivos" clique em permitir sempre.
agora você precisa baixar "twrp.img" do site twrp. também baixe o Magisk mais recente e coloque os dois arquivos na pasta Plataformas ou onde quer que você baixe o ADB e o Fastboot.
uma vez que você tenha feito isso.
volte para sua janela de comando.
tipo
- bootloader de reinicialização do adb
agora estamos no modo fastboot
tipo
- inicialização rápida twrp.img
ele inicializará na recuperação do TWRP.
vá para o guia avançado, clique em Flash atual TWRP
agora volte para avançar e clique em ADB Sideload
agora de volta à janela de comando
tipo
-b sideload Magisk2022.zip "ou o que você configurou anúncio.
ele irá piscar o Magisk, uma vez feito isso, você está com o Bootloader desbloqueado e agora enraizado.
abra o aplicativo no telefone e siga as instruções. clique em atualizações se disser atualização em ambos
sempre fachada "instalação direta" no primeiro. A menos que você faça uma atualização de algum tipo. Então você faz "slot inativo"
qualquer outra pergunta irmão, sinta-se à vontade para gritar comigo. Espero que isto ajude. Espero que você tenha o telefone de 12 GB/256 GB.
Muitas benções
Click to expand...
Click to collapse
You could make a video , teach this in video , it would help the Oneplus 9 community a lot , because there is no video or someone to show this

illusiveairforce said:
First, go to about phone, click on Build Number 7 Times.
Then back to System > Developer Options, click the OEM Unlocking Tab, also scroll down and click the USB Debugging tab.
then to your computer, make sure you have ADB and Fastboot program installed.
- SDK Platforms.
Then go to the folder or if you have ADB installed. Click the "path" bar and tyif pe CMD and hit enter
your command prompt will no open. Connect the phone to the computer.
Type
- adb devices
if it shows your device, were good and connected. It will show a prompt, "Allow Devices" click allow always.
now you need to Download "twrp.img" from the twrp website. also download the latest Magisk and put both files into the Platforms folder or wherever you download ADB and Fastboot.
once you have that done.
go back to your command window.
type
- adb reboot bootloader
now we are in fastboot mode
type
- fastboot boot twrp.img
it will boot into TWRP recovery.
go to Advanced tab, click Flash current TWRP
now go back to advanced and click ADB Sideload
now back to command window
type
- adb sideload Magisk2022.zip "or whatever you have it named.
it will flash Magisk, once that is done, you are Bootloader Unlocked and Now Rooted.
open the app on the phone and follow the prompts. click updates if it says update on both
always do "direct install" on the first one. Unless you do an update of some sort. Then you do "inactive slot"
any other questions brother, feel free to holler at me. Hope this helps. Hope you got the 12GB/256GB phone.
Many blessings
Click to expand...
Click to collapse
Thanks a lot! It comes with Global ROM, but I'm not sure this is a chinese version with ads...
I guess I prefer flashing EU/Global oficial versión.
When should I do it? After unlocking bootloader?
Thanks again

I have the same model and upgraded to android v12 do I do same steps or I have to downgrade to v11 first ?
Also, from security point of view what is the possipility of collecting my phone data after unlocking my boot loader ! is that true ?
Thanks in advance

Fazer Root

eu quero fazer o root no meu Multilaser H (Android 9), mas não encontro uma forma mais simples de fazer isso e, a maioria delas, usa o magisk sendo, por enquanto, a maneira que tenho tentado. Porém eu gostaria de saber se há alguma forma mais simples de se ter acesso ao superusuário. Há arquivos que quero recuperar e várias outras coisas que esse processo me permitir.
Mod translation: I want to root my Multilaser H (Android 9), but I can't find a simpler way to do it, and most of them use magisk, which is, for now, the way I've been trying. But I would like to know if there is a simpler way to access the superuser. There are files I want to recover and various other things this process will allow me to do.

To fetch data from device rooting Android is basically not needed, this can get achieved if ADB was successfully initialized on device: unplug device from PC if connected, then boot device into recovery mode , then connect device with PC via USB-cable, start ADB and pull the data you are interested in.

please use english language only. for rooting a boot.img is required. it can be read off device only with root access or custom recovery, which you obviously don't have. the only other method to read boot partition off device is EDL mode. but you need file that is especially signed for multilaser.
(example prog_ufs_firehose_sdm710_ddr.elf for Xiaomi)