Question Error when flashing rom. Please help! - Lenovo P11

I have Lenovo Xiaoxin pad P11.
I used Qfil to flash the Global rom, and now it's like this.
I think I'm doing something wrong when setting up Qfil.
Please guide step by step (
Thanks so muchhhhh ((((
P.s: Sr for my bad English. I used Google Tranlate

turn it off, disconnect to PC, open Qfil, press down the "volume +" buttom (do not release) and connect to pc (release till Qfil shows "Qualcomm HS-USB QDLoader 9008(comx)").
A. Qfil-Configuration-FireHoseConfiguration:
1. device type: ufs
2. Reset After Download: check
B. the main window:
load content: the contents.xml file
then press download content and wait till it boots.
Good luck!

asukav said:
turn it off, disconnect to PC, open Qfil, press down the "volume +" buttom (do not release) and connect to pc (release till Qfil shows "Qualcomm HS-USB QDLoader 9008(comx)").
A. Qfil-Configuration-FireHoseConfiguration:
1. device type: ufs
2. Reset After Download: check
B. the main window:
load content: the contents.xml file
then press download content and wait till it boots.
Good luck!
Click to expand...
Click to collapse
i have found the link of rom and qfil, can you guide me which version do i neeed to download ?
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com

I had bricked my P11 completely. I was not able to switch to recovery or something else, I got always only the fastboot screen. Even the stupid warning about the unlocked bootloader was missing.
I just was able to solve the problem with these settings:
- prog_firehose_ddr.elf
- rawprogram_unsparse0.xml
- patch0.xml

famicom9x said:
i have found the link of rom and qfil, can you guide me which version do i neeed to download ?
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
Click to expand...
Click to collapse
Lolinet provide Global version not the Chinese one.
If your pad is J606F, then "TB-J606F_CN_WIFI_USER_Q00016.0_Q_ZUI_12.0.519_ST_210130" is what you need.
Just uploaded to mega:
2.38 GB file on MEGA
mega.nz

asukav said:
Lolinet provide Global version not the Chinese one.
If your pad is J606F, then "TB-J606F_CN_WIFI_USER_Q00016.0_Q_ZUI_12.0.519_ST_210130" is what you need.
Just uploaded to mega:
2.38 GB file on MEGA
mega.nz
Click to expand...
Click to collapse
yeah i want to flash international rom, because with the china rom i cant enable usb tethering and disable lock screen,

famicom9x said:
yeah i want to flash international rom, because with the china rom i cant enable usb tethering and disable lock screen,
Click to expand...
Click to collapse
Pretty hard to choose. It's said before flash a global one, it's better to unlock BL (or hardware incompatible happens).
However, I want Japanese (there's only CHT CHS and English in Chinese roms), and a pure android experience.
I really hate this, different Roms across countries. Can't they just develop only one but push localized apps to regions?

asukav said:
Pretty hard to choose. It's said before flash a global one, it's better to unlock BL (or hardware incompatible happens).
However, I want Japanese (there's only CHT CHS and English in Chinese roms), and a pure android experience.
I really hate this, different Roms across countries. Can't they just develop only one but push localized apps to regions?
Click to expand...
Click to collapse
btw when flashing with qfil there are a setting calledd "Availible Meta Build Storage Types" what should i chose emmc or ufs?

famicom9x said:
btw when flashing with qfil there are a setting calledd "Availible Meta Build Storage Types" what should i chose emmc or ufs?
Click to expand...
Click to collapse
UFS, bro! I got an error when I flashed the global rom. But when I flash stock rom I will config this

asukav said:
Lolinet provide Global version not the Chinese one.
If your pad is J606F, then "TB-J606F_CN_WIFI_USER_Q00016.0_Q_ZUI_12.0.519_ST_210130" is what you need.
Just uploaded to mega:
2.38 GB file on MEGA
mega.nz
Click to expand...
Click to collapse
I fixed my device thanks to your help
My device error when flashing global rom. But stock rom is fine.

asukav said:
Lolinet provide Global version not the Chinese one.
If your pad is J606F, then "TB-J606F_CN_WIFI_USER_Q00016.0_Q_ZUI_12.0.519_ST_210130" is what you need.
Just uploaded to mega:
2.38 GB file on MEGA
mega.nz
Click to expand...
Click to collapse
flash is bootloop, help me

Related

[OP7][OOS 10.3.8 GM57AA & .0.10GM57BA] Unbrick tool to restore your device to OxygenOS

Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been modified before it was cool.
Hi everyone, similar to the previous threads for
OP3, OP3T, OP5, OP5T and OP6 and OP6T, here are the EDL packages (also known as MSM tool or unbrick tool) that can revive a bricked OnePlus 7.
They can also be used to rollback your phone to a previous release of OOS.
You can download the following versions:
GM57AA tools (International firmware):
ANDROID 9:
9.5.6
9.5.7
9.5.8
ANDROID 10:
10.0.1
10.0.2
10.0.3
10.3.0
10.3.1
10.3.2
10.3.5
10.3.6
10.3.7
10.3.8
Mirror for first and last MSMs per Android version: https://onepluscommunityserver.com/
GM57BA tools (European firmware):
ANDROID 9:
9.5.6
9.5.7
9.5.8
ANDROID 10:
10.0.2
10.0.3
10.0.4
10.0.5
10.0.7
10.0.8
10.0.9
10.0.10
Mirror for first and last MSMs per Android version: https://onepluscommunityserver.com/
It supports GM1900, GM1901, GM1903 and GM1905 models.
You can upgrade to newer versions of OOS using files linked in thread https://forum.xda-developers.com/oneplus-7/how-to/oneplus-7-repo-oxygen-os-builds-t3937152 originally made by @SkandaH
Instructions:
Power your device off
Maintain volume up and volume down keys to get into Qualcomm EDL mode.
Launch MsmDownloadTool V4.0.exe.
Click on Enum to be sure your device is detected and press Start.
Wait ~300 seconds
Enjoy your brand new device
FAQ:
My device isn't detected when I click on "Enum" button
Go to device manager and make sure your phone shows up as QDLOADER 9008.
If it shows up as QHUSB_BULK, it means Qualcomm driver wasn't installed automatically by Windows Update. Download the latest one from Microsoft website at http://download.windowsupdate.com/c..._fba473728483260906ba044af3c063e309e6259d.cab (source https://www.catalog.update.microsof...updateid=8ee52ba0-bdef-4009-88cf-335a678dd67a ) and install it manually by right clicking on QHUSB_BULK and selecting "Update driver software" and "Browse my computer for driver software" to where you downloaded CAB file.
My device doesn't stay in EDL mode for more than 10 seconds
Some units can have this problem and there isn't a lot of things to do to fix that, except being fast after plugging your phone to your computer.
EDIT 7th August 2019: There is apparently a "one-off" solution to this problem available at https://forum.xda-developers.com/showpost.php?p=80021106&postcount=21 . I would like to investigate more on that but sadly don't own the device so can't confirm it.
MSM tool is stuck on "Param pre-processing"
Ensure you're using the Qualcomm drivers linked in first part of this FAQ.
What is SMT Download mode?
Just don't try to unlock that mode, it will wipe your IMEI and your Widevine certificate if you use it.
Credits:
@SkandaH for inspiration in writing
@headsh0t95 for suggesting me to request an access to upload files on AndroidFileHost a few months ago for my previous threads
@AndroidFileHost for the hosting
OnePlus for the device and OS
Reserved
Reserved
Credits:
@SkandaH for inspiration in writing
@headsh0t95 for suggesting me to request an access to upload files on AndroidFileHost a few months ago for my previous threads
@AndroidFileHost for the hosting
Votton for providing a server as an alternative mirror
OnePlus for the device and OS
THIS IS AMAZING! Thank you so much. Worked like charm. No need for installing extra drivers under Windows 10 or going through some other script madness. Really smooth and easy. Thanks!
Just got my OP7 yesterday and accidentally bricked it by formatting the vendor partition in TWRP. So I was searching for an Unbrick tool but there was none.
Thank god that you uploaded this just last night and saved my OP7 from an early death
In order to get the EU firmware back I simply have to flash the OxygenOS for my region and that's it, right? - Worked via TWRP
Another question though: I can create files on data when I am on the phone and I can also copy files over via USB-OTG. However when I try to push files via adb it tells me that the partition is read-only. Any idea how to fix this?
Cool it's also almost the latest version. I think I can close the other thread now.
devnerd said:
THIS IS AMAZING! Thank you so much. Worked like charm. No need for installing extra drivers under Windows 10 or going through some other script madness. Really smooth and easy. Thanks!
Just got my OP7 yesterday and accidentally bricked it by formatting the vendor partition in TWRP. So I was searching for an Unbrick tool but there was none.
Thank god that you uploaded this just last night and saved my OP7 from an early death
In order to get the EU firmware back I simply have to flash the OxygenOS for my region and that's it, right? - Worked via TWRP
Another question though: I can create files on data when I am on the phone and I can also copy files over via USB-OTG. However when I try to push files via adb it tells me that the partition is read-only. Any idea how to fix this?
Click to expand...
Click to collapse
Hi, I sadly have no idea about how to fix the adb push thing
Thanks for the response thiugh. I fixed it yesterdy evening.
First I tried to update the system to the EU version via local upgrade but it didn't let me as I was already on a "newer" version. So it interestingly classifies the Global version newer as the EU version for somehow.
So I went for TWRP and flashed the EU version to both slots (not even sure if that was necessary). After a reboot I was back on the EU version and also the adb push worked again. So not sure what was done to the data partition during the update, but it just worked
Some_Random_Username said:
FAQ:
My device isn't detected when I click on "Enum" button
Go to device manager and make sure your phone shows up as QDLOADER 9008.
If it shows up as QHUSB_BULK, it means Qualcomm driver wasn't installed automatically by Windows Update. Download the latest one from Microsoft website at https://www.catalog.update.microsof...updateid=8ee52ba0-bdef-4009-88cf-335a678dd67a and install it manually by right clicking on QHUSB_BULK and selecting "Update driver software" and "Browse my computer for driver software" to where you downloaded CAB file.
My device doesn't stay in EDL mode for more than 10 seconds
Some units can have this problem and there isn't a lot of things to do to fix that, except being fast after plugging your phone to your computer.
MSM tool is stuck on "Param pre-processing"
Ensure you're using the Qualcomm drivers linked in first part of this FAQ.
What is SMT Download mode?
Just don't try to unlock that mode, it will wipe your IMEI and your Widevine certificate if you use it.
Click to expand...
Click to collapse
Hello friends, automatic restart solution after 10 seconds when connecting EDL mode to use MsmDownloadTool:
https://forum.xda-developers.com/showpost.php?p=80021106&postcount=21
tURkOsANsE said:
Hello friends, automatic restart solution after 10 seconds when connecting EDL mode to use MsmDownloadTool:
https://forum.xda-developers.com/showpost.php?p=80021106&postcount=21
Click to expand...
Click to collapse
Updated FAQ to include it, thanks for pointing it out
Added OOS 9.5.8 GM57AA unbrick tool
So how i understand this make my device how "of box"?
Where security? If i lost my phone 14yo boy can make MY device HIS...
WTF OP...
3a6ygb said:
So how i understand this make my device how "of box"?
Where security? If i lost my phone 14yo boy can make MY device HIS...
WTF OP...
Click to expand...
Click to collapse
Lol. Security means your data isn't visible for 14yo boy because of encryption blabla. Nobody said it's security if he is able to steal your phone and format the storage with your personal data.
Kollachi said:
Lol. Security means your data isn't visible for 14yo boy because of encryption blabla. Nobody said it's security if he is able to steal your phone and format the storage with your personal data.
Click to expand...
Click to collapse
Thx
Ok. But it really make full format all phone?
If i use this msm rom i have clear device without user data, without frp etc?
3a6ygb said:
Thx
Ok. But it really make full format all phone?
If i use this msm rom i have clear device without user data, without frp etc?
Click to expand...
Click to collapse
Yes, it wipes everything off your device and make it like the first day of unboxing. But you can do the same by going into android settings and make a factory reset.
I need msm download tool for latest oxygen os 10.0.1 ,is anyone is here who give me the link of it for oneplus 7?
Prinçe çharming ap said:
I need msm download tool for latest oxygen os 10.0.1 ,is anyone is here who give me the link of it for oneplus 7?
Click to expand...
Click to collapse
For OOS 10.0.1 there is no version. Use the latest 9.5.8 to get back on pie then update to stable 10.0.1 or stay on pie :good:
Sent from my OnePlus7 using XDA Labs
GraveDigger176 said:
For OOS 10.0.1 there is no version. Use the latest 9.5.8 to get back on pie then update to stable 10.0.1 or stay on pie :good:
Click to expand...
Click to collapse
I already have that version of msm tool but i want it for android 10.
Prinçe çharming ap said:
I already have that version of msm tool but i want it for android 10.
Click to expand...
Click to collapse
There is no version for Android 10 as far as I know
Sent from my OnePlus7 using XDA Labs
GraveDigger176 said:
There is no version for Android 10 as far as I know
Click to expand...
Click to collapse
Do u know how to extract .ops file of msm tool?

Question Root question for moto g stylus xt2115-1 2021

So I bought a moto g stylus 2021 from Motorola it's unlocked but not bootloader unlocked I don't know why there is a difference but whatever how hard could it be to unlock so anyways if I can get the bootloader unlocked I need to know if this is where I start the process of rooting here is the link to what I believe is the correct boot image
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
I only ask because my phone matches up with the build number in this link So is that exactly what I need?
ShadowFox141 said:
So I bought a moto g stylus 2021 from Motorola it's unlocked but not bootloader unlocked I don't know why there is a difference but whatever how hard could it be to unlock so anyways if I can get the bootloader unlocked I need to know if this is where I start the process of rooting here is the link to what I believe is the correct boot image
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
I only ask because my phone matches up with the build number in this link So is that exactly what I need?
Click to expand...
Click to collapse
[Guide] Using Fastboot.exe with Motorola devices
Guide: Using Fastboot.exe with Motorola Devices If your device has its own section please post in that section. You can ping me with @sd_shadow MediaTek or Qualcomm Chip? Do I have a MediaTek Device? see post #26 Info: If you have a MediaTek...
forum.xda-developers.com
sd_shadow said:
[Guide] Using Fastboot.exe with Motorola devices
Guide: Using Fastboot.exe with Motorola Devices If your device has its own section please post in that section. You can ping me with @sd_shadow MediaTek or Qualcomm Chip? Do I have a MediaTek Device? see post #26 Info: If you have a MediaTek...
forum.xda-developers.com
Click to expand...
Click to collapse
Did I post in the wrong section?
But also I was looking at what you sent and where the whole code names I didn't see anything about the XT2115-1 but on lolinet I found it and according to it my codename should be retus but I'm at work when I get home I'm going to use that fastboot getvar all method to double check but I'm pretty certain it will come up with retus all sorry if I posted in the wrong spot I thought this was the right place for my phone
ShadowFox141 said:
Did I post in the wrong section?
But also I was looking at what you sent and where the whole code names I didn't see anything about the XT2115-1 but on lolinet I found it and according to it my codename should be retus but I'm at work when I get home I'm going to use that fastboot getvar all method to double check but I'm pretty certain it will come up with retus all sorry if I posted in the wrong spot I thought this was the right place for my phone
Click to expand...
Click to collapse
See my bootloader unlock thread, then see my root thread.
If you have questions ask here, in your thread.
sd_shadow said:
See my bootloader unlock thread, then see my root thread.
If you have questions ask here, in your thread.
Click to expand...
Click to collapse
Alright thanks man much appreciated I'll let you know if I succeed
Anyone get root on Moto g stylus xt2115dl using a root app without a computer? I've tried all of them and none of them
worked. Is it just me?
download the "lenovo rescue and smart assistant" plug your phone in, start to perform a rescue- it will download the latest firmware into C:\ProgramData\RSA\Download\RomFiles -
Extract the Rom it downloads and Copy Boot.img to your phone
download Magisk and install on your phone
open Magisk and select install magisk then select "Select and patch file" - browse to the boot.img file you copied to your phone and patch it
once patched copy back to your pc
download and install google latest platform-tools
reboot phone into fastboot mode by running this in cli: adb reboot-fastboot
then replace the bootimg with the patched one by using the command: fastboot flash boot boot.img
fastboot reboot
Oncre it reboots you should see magisk, click on it, itll auto update and reboot your phone
go back to magisk and click on install, but this time select (direct install)
reboot and done....
I stand corrected worked likea charm now to find some modules! thanks bro now I got 11 at least and got the root working. I will also give credit where i was asking others how to do it so that others can figure it out I was making it was to hard, although I would like a permanent twrp for it, but if i get time and all the trees maybe we can get it built.
I tried for months to get a ROM and Recovery built for this phone. Never could get a workable device/vendor tree. It was missing a lot of things. Not sure why. I tried about 4 different extraction methods, all of which only partially worked. I ended up deleting about 80gb of build related files from my HDD in frustration. I may try again someday soon, but I would much rather just replace this phone.
Here is where my device and vendor trees are located, but doubtful they will do you much good.
lacojim - Overview
lacojim has 6 repositories available. Follow their code on GitHub.
github.com

Development [ROM] [OFFICIAL] [ TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.211_ST_210730_qpst]

This ROM is for TB-716F, the Chinese version (not Global).
for @mardon85 @trojaner_80 @sakun-ice and all friends in this section.
Since lolinet uploaded the same package, mine from onedrive is deleted (to save some storage).
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
BTW, I'm using TB-606F, and I'm living in China. So if you want any Chinese version ROM, pls let me know.
Other roms, I mean the Global ones, you can get them from lolinet.
asukav said:
This ROM is for TB-716F, the Chinese version (not Global).
for @mardon85 @trojaner_80 @sakun-ice and all friends in this section.
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.211_ST_210730_qpst.zip
Compressed (zipped) Folder
1drv.ms
Pls get me noticed if the link is invalid.
BTW, I'm using TB-606F, and I'm living in China. So if you want any Chinese version ROM, pls let me know.
Click to expand...
Click to collapse
You are amazing! This rom is flasheable with qualcomm program right?
sakun-ice said:
You are amazing! This rom is flasheable with qualcomm program right?
Click to expand...
Click to collapse
If you are talking about QFIL, then yes. Just pay attention to the steps (copied from another post) :
turn tablet off, disconnect to PC, open Qfil, press down the "volume +" buttom (do not release) and connect to pc (release till Qfil shows "Qualcomm HS-USB QDLoader 9008(comx)").
A. Qfil-Configuration-FireHoseConfiguration:
1. device type: ufs
2. Reset After Download: check
B. the main window:
load content: the contents.xml file
then press download content and wait till it boots.
I tried to flash this rom step by step according to your instructions. Unfortunately I get the following error message: Sahara protocol failed
rgeon said:
I tried to flash this rom step by step according to your instructions. Unfortunately I get the following error message: Sahara protocol failed
Click to expand...
Click to collapse
I'm sorry for this but I checked through Google, it's said some reasons could cause this error.
I think the ones below should be one of the causes:
1. QFIL version is old. I'm using 2.0.2.3, but there's newer versions.
2. USB cable should be the original one from the box not a random one.
3. when QFIL settings are all ready, press vol+ then connect to PC (do not connect to pc too early), then confirm QFIL shows "Qualcomm HS-USB QDLoader 9008(comx)". And please keep USB connecting to PC till your pad boot to normal.
4. before flashing, pls make sure the qualcomm driver is correctly installed (in case of the windows driver signature check restriction).
Hope everything be fine. Good luck!
Hi Guys, this video fixed my problem:
Now i have flashed stock rom
asukav said:
This ROM is for TB-716F, the Chinese version (not Global).
for @mardon85 @trojaner_80 @sakun-ice and all friends in this section.
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.211_ST_210730_qpst.zip
Compressed (zipped) Folder
1drv.ms
Pls get me noticed if the link is invalid.
BTW, I'm using TB-606F, and I'm living in China. So if you want any Chinese version ROM, pls let me know.
Other roms, I mean the Global ones, you can get them from lolinet.
Click to expand...
Click to collapse
@asuka: 1000 Thanks to you! You are the best!!
I will try to flash the stock ROM tomorrow.
rgeon said:
Hi Guys, this video fixed my problem:
Now i have flashed stock rom
Click to expand...
Click to collapse
I received the same error message: Download Fail:Sahara Fail:QSaharaServer Failrocess fail
My Qfil-Configuration-FireHoseConfiguration:
device type: ufs
Reset After Download: check
Which elf-file have you selected in field programmer? prog_firehose_ddr.elf or prog_firehose_lite.elf
Have you selected the contents.xml file in the field flash build?
I think I destroyed my Tablet today . I selcted the file rawprogram_unsparse0.xml. the Download Succeed and afterwards the Tablet shows the Lenovo Logo after start for mor than 10 minutes. It seems the chineses ROM has not been installed and the previous ROM has been deleted. Now I can access only bootload and adb shows
my Tablet in List of devices as unauthorized. Also a boot in EDL mode by pressing Volume + and Power is not possible anymore. I would be really thankful, if anybody has an advice for me, what I can do now.
Hello. Now I was able to flash the chinese Rom on my Tablet, but WLAN does not work. I´m not able to activate WLAN. Does anybody else has the same problem?
trojaner_80 said:
Hello. Now I was able to flash the chinese Rom on my Tablet, but WLAN does not work. I´m not able to activate WLAN. Does anybody else has the same problem?
Click to expand...
Click to collapse
I read something about that. They have to change the region of the tablet to Hong Kong.
How have you recovered the rom?
trojaner_80 said:
Hello. Now I was able to flash the chinese Rom on my Tablet, but WLAN does not work. I´m not able to activate WLAN. Does anybody else has the same problem?
Click to expand...
Click to collapse
I had this issue its the wireless band of your router. I had to set my router to Hong Kong band to get on the 5ghz band.
I was able to install this rom, but now I have an issue with the OTA. Was anyone able to apply the update 12.6.238 ST 8.27MB? Mine keeps me prompting to re-install the same version after reboot. I've tried many times.
By the way, I had hope I would get widevine L1 after installing the rom 210730, but that didn't happen .
Was anyone able to get widevine L1 after flashing this ROM?
Great work sir,
Does it have any other language or just only English and China?
fabricioss1980 said:
Was anyone able to get widevine L1 after flashing this ROM?
Click to expand...
Click to collapse
Firstly, you have to factory reset the CN rom you just installed, otherwise your device will get bricked. Then you relock the bootloader with fastboot command "fastboot flashing lock". You will get widevine L1 back.
Is there an opportunity to unbrick the Tablet?
@asukav
hello sir.
Do you have cn 12.6.084 rom? Or zui12.5 or higher (android 11) the most recent cn rom..
i need lastest cn rom..
Is it possible to get the rom?
asukav said:
This ROM is for TB-716F, the Chinese version (not Global).
for @mardon85 @trojaner_80 @sakun-ice and all friends in this section.
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.211_ST_210730_qpst.zip
Compressed (zipped) Folder
1drv.ms
Pls get me noticed if the link is invalid.
BTW, I'm using TB-606F, and I'm living in China. So if you want any Chinese version ROM, pls let me know.
Other roms, I mean the Global ones, you can get them from lolinet.
Click to expand...
Click to collapse
can i get the latest version of chinese rom of Tb-606f?
Sorry guys. Thiese roms are what I can find in chinese forums.
Since they can be upgraded (Mine is 606, and OTAs are all right, so I guess other models can be) through OTA, it seems no need to get the latest.
But if there appears any, I'll upload them.
It's National Day Holiday, 7 days starting from Oct. 1. I won't be online for long.
And I'm still trying to figure out how to flash the latest Global on 606 CN Ver.
The hardware incompatible error sucks. F you, Lenovo.

Moto G Pure

where can i download the firmware for this?
XT2163-4
i unlocked the bootloader and ima try to compile orangefox or twrp i really need the boot img
mr_reaper said:
where can i download the firmware for this?
XT2163-4
i unlocked the bootloader and ima try to compile orangefox or twrp i really need the boot img
Click to expand...
Click to collapse
May I know how you unlock the bootloader? Is this the ATT version? Thank you
Hey I am thinking about buying this phone and wondering if there is a way to unlock bootloader flash costume recovery and magisk. Mine is from Canada so it would be a huge help please and thank you
I have a moto g pure from assurance wireless that I successfully rooted
tiptop87 said:
Hey I am thinking about buying this phone and wondering if there is a way to unlock bootloader flash costume recovery and magisk. Mine is from Canada so it would be a huge help please and thank you
Click to expand...
Click to collapse
i unlock mines
Unlocking the Bootloader | Motorola Support US
Visit the customer support page to view user guides, FAQs, bluetooth pairing, software downloads, drivers, tutorials and to get repair and contact us information.
motorola-global-portal.custhelp.com
It's there not any custom ROM for this device?
Is there any update on twrp or any custom recovery?please?anybody?
ken.yong said:
May I know how you unlock the bootloader? Is this the ATT version? Thank you
Click to expand...
Click to collapse
Use Rescue and Smart Assistant from Motorola to download the stock Rom. It will save to: C:\ProgramData\RSA\Download\RomFiles
Rescue and Smart Assistant Tool - Motorola
<h6><span style="color:#FFFFFF"><strong>Our Rescue and Smart Assistant tool</strong><br />can help diagnose and resolve issues on your<br />Motorola phone or Lenovo phone/tablet.</span></h6>
www.motorola.com
mr_reaper said:
where can i download the firmware for this?
XT2163-4
i unlocked the bootloader and ima try to compile orangefox or twrp i really need the boot img
Click to expand...
Click to collapse
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
bayjones742 said:
Is there any update on twrp or any custom recovery?please?anybody?
Click to expand...
Click to collapse
Nothing official but I'm working on TWRP patching ramdisk. The Moto G Pure doesn't use the traditional recovery partition, so you have to replace the ramdisk recovery inside the boot.img
mr_reaper said:
where can i download the firmware for this?
XT2163-4
i unlocked the bootloader and ima try to compile orangefox or twrp i really need the boot img
Click to expand...
Click to collapse
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
williamdholley said:
It's there not any custom ROM for this device?
Click to expand...
Click to collapse
Haven't found any yet. Still looking
KMerrimanJr said:
Use Rescue and Smart Assistant from Motorola to download the stock Rom. It will save to: C:\ProgramData\RSA\Download\RomFiles
Rescue and Smart Assistant Tool - Motorola
<h6><span style="color:#FFFFFF"><strong>Our Rescue and Smart Assistant tool</strong><br />can help diagnose and resolve issues on your<br />Motorola phone or Lenovo phone/tablet.</span></h6>
www.motorola.com
Click to expand...
Click to collapse
Hey I tried this and I lost where the file went. I have tried searching for c:\Programdata on my laptop and I came up with nothing. I tried saving the firmware to a different location and nothing happens. No matter how many times I downloadel firmware. Even with the changes location to download. Do I have to uninstall rescue and smart assistant to redownload the firmware from Rescue and Smart assistant to get boot.img. I hope to hear back
KMerrimanJr said:
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
Click to expand...
Click to collapse
I could not find the Canadian version of the firmware in the listings. My build number is Retail or RETUS(I believe) S3RHS32.20-40-10-2. I'll have to check if that is right
tiptop87 said:
Hey I tried this and I lost where the file went. I have tried searching for c:\Programdata on my laptop and I came up with nothing. I tried saving the firmware to a different location and nothing happens. No matter how many times I downloadel firmware. Even with the changes location to download. Do I have to uninstall rescue and smart assistant to redownload the firmware from Rescue and Smart assistant to get boot.img. I hope to hear back
Click to expand...
Click to collapse
Its because it is located in a hidden folder
https://support.microsoft.com/en-us/windows/view-hidden-files-and-folders-in-windows-97fbc472-c603-9d90-91d0-1166d1d9f4b5&ved=2ahUKEwjC4J2Wuvb8AhVBSDABHZDnA4AQFnoECBQQBQ&usg=AOvVaw3dPbrClFISeBczeBZjtN25
AndroidHaxDude said:
I have a moto g pure from assurance wireless that I successfully rooted
Click to expand...
Click to collapse
can you help me? i have the same phone from same provider.
I'm trying to root my g pure so I can unlock the carrier, how do I do it without computer or credit card
My phone restarted for 2 hours and now it thinks it existed in 1969. It also now says it isn't a moto g pure but a generic android device and the serial number changed. Is there any way to encrypt the hardware so it cannot be remotely flashed again?

NEED N976V U7 emergency_download / DEAD-BOOT / DEAD-FIX / DEBUG EMERGENCY / 9008 / UnBrick / firehose programmer / loader PLEASE

Hi all,
I need a N976V U7 (USB only) DEAD-BOOT file / DEAD-FIX file / DEBUG EMERGENCY / 9008 / UnBrick / firehose programmer
The SM-N976V is a Verizon variant of the Note 10+ 5G positioned for the US market.
PLEASE PLEASE PLEASE !!!
Thank you.
Network_Pro said:
Hi all,
I need a N976V U7 (USB only) DEAD-BOOT file / DEAD-FIX file / DEBUG EMERGENCY / 9008 / UnBrick / firehose programmer
The SM-N976V is a Verizon variant of the Note 10+ 5G positioned for the US market.
PLEASE PLEASE PLEASE !!!
Thank you.
Click to expand...
Click to collapse
you dont need that as far as you can get into EDL mode you can flash with miracle tool box
So the Miracle Tool support SM-N976V SW Rev . bit7 (U7) ? I didn't find it specifically mentioned anywhere. In the EDL mode the Qualcomm sm8150 requires the firehose programmer. For other models this file seems to available so there is hope that for this model it can also be obtained from GSPN USA probably or from a guy who knows a guy who knows a guy who passed by a Samsung building once wink wink.
Network_Pro said:
So the Miracle Tool support SM-N976V SW Rev . bit7 (U7) ? I didn't find it specifically mentioned anywhere. In the EDL mode the Qualcomm sm8150 requires the firehose programmer. For other models this file seems to available so there is hope that for this model it can also be obtained from GSPN USA probably or from a guy who knows a guy who knows a guy who passed by a Samsung building once wink wink.
Click to expand...
Click to collapse
am telling you from experience it happened to my device i bricked it and i used miracle tool crack with just stock rom i did the EDL i just selected scatter file etc and i flashed and that was it
Anyways Good luck unbricking
Which update was it? I think the problem is the bit7 / U7 the firehose for that is another one if it worked for previous versions.
Gudaji said:
am telling you from experience it happened to my device i bricked it and i used miracle tool crack with just stock rom i did the EDL i just selected scatter file etc and i flashed and that was it
Anyways Good luck unbricking
Click to expand...
Click to collapse
Gudaji please give more info how did you do it exactly? Which 'scatter' file did you write to the device ?
Network_Pro said:
Gudaji please give more info how did you do it exactly? Which 'scatter' file did you write to the device ?
Click to expand...
Click to collapse
Okay,
I unpacked the firmware got the scatter file put the device in edl mode (with pins) and flashed the device .
But make sure you watch legit tutorials on YouTube how to get miracle tool box crack
Gudaji said:
Okay,
I unpacked the firmware got the scatter file put the device in edl mode (with pins) and flashed the device .
But make sure you watch legit tutorials on YouTube how to get miracle tool box crack
Click to expand...
Click to collapse
I've deleted your other post in this thread for the same reasons I already provided you here:
[RELEASED] TWRP FOR REDMI 12C/Poco C55
So I've started development for device trees, TWRP and custom for Redmi 12C (earth) and by the end of may we should also have a rom and custom recovery for our Redmi 12C. So stay tuned
forum.xda-developers.com
Please read my message as a friendly warning!
Regards
Oswald Boelcke
Senior Moderator
Which firmware and which scatter file? It won't work with wrong ones. More specifics please.
Did you have a pre-made scatter file, that you have made before bricking/EDL ?
It is important to be precise.
Network_Pro said:
Which firmware and which scatter file? It won't work with wrong ones. More specifics please.
Did you have a pre-made scatter file, that you have made before bricking/EDL ?
It is important to be precise.
Click to expand...
Click to collapse
Your stock rom it is in your stock rom just unpack it or use ODIN to unbrick
Odin does not see the phone because the phone is in 9008 EDL mode and the driver for that one is from Qualcomm. Odin wants a mode and driver from Samsung. For the Samsung download - Odin mode to work, the later Boot stages need to load. Those are messed up by wrong etoken bypass for the wrong Update version or wrong BL or tripepd knox erasure of the entire flash or something of that sort.
In the stock ROM I do not know which file you can call a scatterfile? Is it the PIT file which is used for formatting?
This is the 'stock ROM' correct ? https://samfw.com/firmware/SM-N976V/VZW/N976VVRU7HWB2
Well for sure the Miracle Box has a huge collection of loaders in the distribution, as well as XML files. Very interesting.
@Gudaji, it seems, however that with U7 there may be needed a new loader. The update "bit" is somehow set inside the CPU, which, from my understanding, prevents older loaders from working?
Network_Pro said:
Well for sure the Miracle Box has a huge collection of loaders in the distribution, as well as XML files. Very interesting.
@Gudaji, it seems, however that with U7 there may be needed a new loader. The update "bit" is somehow set inside the CPU, which, from my understanding, prevents older loaders from
Click to expand...
Click to collapse
First of all do you have miracle tool box?
If so go to the Qualcomm tab and you will se flash tab under and then you select the files from your “extracted” firmware and flash while in EDL mode
The "Miracle Box Update 3.39 to 3.40 only for PS" informs me there is a new version and does not start. Maybe I do not have the right one.
Network_Pro said:
The "Miracle Box Update 3.39 to 3.40 only for PS" informs me there is a new version and does not start. Maybe I do not have the right one.
Click to expand...
Click to collapse
There is a bypass for it but you have to look for it
I am not finding it yet give me more clues on PM please.
If someone can share a working Miracle tool or sell me a license please PM me.
Network_Pro said:
I am not finding it yet give me more clues on PM please.
If someone can share a working Miracle tool or sell me a license please PM me.
Click to expand...
Click to collapse
Reply in my pm asap
Network_Pro said:
I am not finding it yet give me more clues on PM please.
If someone can share a working Miracle tool or sell me a license please PM me.
Click to expand...
Click to collapse
First off how did you brick your device
Spammed the download mode with some wrong files. older etoken bypass, vbmeta disabled, KG disabled , eng. files, modem from other model, boot from other model, twrp recovery not sure which exactly was a successful flash and which were rejected due to checksum mismatch.
Network_Pro said:
Spammed the download mode with some wrong files. older etoken bypass, vbmeta disabled, KG disabled , eng. files, modem from other model, boot from other model, twrp recovery not sure which exactly was a successful flash and which were rejected due to checksum mismatch.
Click to expand...
Click to collapse
hayahe sorry your mobile is dead kek
MIRACLE TOOLBOX IS YOUR 1 AND ONLY SOLUTION IF YOU DONT WANT TO PAY ANYONE IVE GIVEN YOU GUIDE IN YOUR PM SO GOODLUCK KEK

Categories

Resources