Question difference in WW vs CN software - ASUS ROG Phone 5 / 5s

Hello colleagues, what are the differences between the WW vs CN software version? Is it possible to change from WW to CN to WW without any problems?

thieftime1980 said:
Hello colleagues, what are the differences between the WW vs CN software version? Is it possible to change from WW to CN to WW without any problems?
Click to expand...
Click to collapse
These can help you start;
Rog 5 CN convert to Global Fota update 8030...81
- China tencent version converted to WW - Download Global Rom and copy to internal stogare : * WW-18.8030.2101.75 Here 15/03/21 * WW-18.8030.2101.81 Here 23/03/21 - Reboot phone and install
forum.xda-developers.com
RAW Firmware Collection and Guide
All fastboot / adb commands require using the side USB-C port https://developer.android.com/studio/releases/platform-tools.html#download Make sure you have fastboot installed Add platform tools to PATH (post 2) Make a backup of anything...
forum.xda-developers.com

Related

Upgrade AL10 form 182 to 353

Hello,
I have AL10C00B182 ROM - ota upgrade after start use the phone.
Now I have two question:
Can I upgrade from AL10C00B182 to B353 without any other upgrades (dload method)?
Thank!
since u got the OTA to B182, im guessing ure on full stock with locked bootload and no root so in that case, installation of B353 via dload method is no problem. enjoy!
Thank you.
Now I'm on 353 (AL10) with unlocked bootloader.
I'll instal TWPR (EMUI 4.1) with decryption support and them what..?
1. install superSU
2. Have to I do wipe system or with decryption support is not nesesery?
Clean ROM with root is all I need Maybe KangVIP
hello,
May I ask how did you update your AL10C00B182 to B353?
I just had the phone for 2 days and tried checking for updates, but no updates so far.
Thank you.
bodzio3333 said:
Thank you.
Now I'm on 353 (AL10) with unlocked bootloader.
I'll instal TWPR (EMUI 4.1) with decryption support and them what..?
1. install superSU
2. Have to I do wipe system or with decryption support is not nesesery?
Clean ROM with root is all I need Maybe KangVIP
Click to expand...
Click to collapse
wellit depends what u want. if u want to stay on B353 stock and u only want root, flashing supersu is enough. otherwise go ahead and flash kangvip slim via twrp, it comes prerooted so you should be fine
Sent from my Huawei Mate 8 NXT-AL10
shackks said:
hello,
May I ask how did you update your AL10C00B182 to B353?
I just had the phone for 2 days and tried checking for updates, but no updates so far.
Thank you.
Click to expand...
Click to collapse
I had the phone for 3 days
Update is very easy:
- download the ROM - zip file,
- extract update.app from it,
- copy the UPDATE.APP to the internal memory in a folder called - dload (you may have to create it),
- power off phone,
- press [volume+]+ [volume-]+[power] together to force the update,
- done
Please check somethink:
In dialer * # * # 2846579 # * # * Enter and then 3 - Network Information and then on 4 - Vendor Country Info
Here you will find a following entries:
I have Vendor: all
Country: cn
differet that this:
cust eu = C432 - Europe
cust specseas = C636 - Asia
cust meanaf = C185 - Africa / Middle East
cust ru = C10 Russian
I bught phone from Spemall with unlocked bootloader.
jbmc83 said:
wellit depends what u want. if u want to stay on B353 stock and u only want root, flashing supersu is enough. otherwise go ahead and flash kangvip slim via twrp, it comes prerooted so you should be fine
Sent from my Huawei Mate 8 NXT-AL10
Click to expand...
Click to collapse
I suppose stay on B353 stock. I flashed supersu, reboot and its done ? Any wipe? I read that I have to do format system... Maybe too much info.
Ok. I have B353 stock with root and I want too upgrade my phone, so now I have to change twpr too stock and dload, yes ?
bodzio3333 said:
I had the phone for 3 days
Update is very easy:
- download the ROM - zip file,
- extract update.app from it,
- copy the UPDATE.APP to the internal memory in a folder called - dload (you may have to create it),
- power off phone,
- press [volume+]+ [volume-]+[power] together to force the update,
- done
Please check somethink:
In dialer * # * # 2846579 # * # * Enter and then 3 - Network Information and then on 4 - Vendor Country Info
Here you will find a following entries:
I have Vendor: all
Country: cn
differet that this:
cust eu = C432 - Europe
cust specseas = C636 - Asia
cust meanaf = C185 - Africa / Middle East
cust ru = C10 Russian
I bught phone from Spemall with unlocked bootloader.
Click to expand...
Click to collapse
Thanks for the reply bodzio3333,
I shall do it this way later on. But, why do we have to check the region code? I'm having the same country info as yours.

MATE 8 - L09 - Change region

Good morning Everyone
I have an Mate 8 L09C605 (Latin America) and i am trying to change its region to C432 (Europe) but it is impossible to find the oeminfo and custom.bin
Could someone share those files from the C432 please?
With all those rom players i guess there is a lot of backups out there... should not be so difficult to find
Thanks a lot.
Me too. Please help us. Thank you
Cust international (normal) = C900 OTA LOSS but you should be able to install rom from any region
--------------------------------------------------------------------------------------------------------------
Update running
--------------------------------------------------------------------------------------------------------------
Update OK. Now i am L09C900B320
---------------------------------------------------------------------------------------------------------------
The only thing I can not remember is how I am switched to L09C900B100 ... too much manipulation with SRK Tool among others with the change of region.
But it seems to me that it is doing as follows:
1- Full backup with TWRP -Before to change region-
2- Reboot
3- Region change (SRK Tool)
4- Restore TWRP Backup
5- Reboot (it seems to me that at this moment I found myself in L09C900B100, my starting Rom was L09C605B100 (Latin America). So if your starting Rom is a B180 for example, you should end up with L09C900B180.
THEN...
1- Create dload on SDCard with UPPDATE.APP (in my case from L09C432B320)
2- Restore Huawei recovery (SRK Tool)
3- Launch update * # * # 2846579 # * # *
4- Install TWRP EMUI 4.1 (SRK tool)
7- Root with TWRP
8- Reboot
--------------------------------------------------------------------------------------------------------------
VERSION INFORMATION:
In dialer * # * # 2846579 # * # * Enter and then 3 - Network Information and then on 4 -
Vendor Country Info
Here you will find a following entries:
Cust eu = C432 - Europe
Cust specseas = C636 - Asia
Cust meanaf = C185 - Africa / Middle East
Cust ru = C10 Russian
Cust international (normal) = C900 OTA LOSS but you should be able to install rom from any region
Cust la = C605 Latin America
platajeret said:
Cust international (normal) = C900 OTA LOSS but you should be able to install rom from any region
--------------------------------------------------------------------------------------------------------------
Update running
--------------------------------------------------------------------------------------------------------------
Update OK. Now i am L09C900B320
---------------------------------------------------------------------------------------------------------------
The only thing I can not remember is how I am switched to L09C900B100 ... too much manipulation with SRK Tool among others with the change of region.
Click to expand...
Click to collapse
First of all, thank you for spending your precious time writing out the instructions for us.
I followed exactly as your instruction; however, at the end, when I checked About Phone in Settings, my phone is L29C432B320 instead of L09C432B320. This is why I need the OEMINFO and CUSTOM.BIN file for L09C432B320. Thank you
Before to change the region (that gave you the L29), have you done the TWRP backup? While you where still in L09?
Oops! I don't think I did. Do you think that could be the case? BTW, how do you like C432 stock firmware? Is it any better than C636? Thank you
Yes i think that is thé reason. C432 or C636 are not firmware but région. Thé firmware i had was B100 ans now i am with B320. So far m'y phone is faster even without doing any Factory reset. But for stability ans battery life, i can't say yet.
I Guess you could be back to L09 by changing with Srk Tool the buildprop things, but better check with specialists on the fórum.
Thank you, platajeret.
I went back to L09C636B191
backup System with TWRP (for some reasons, TWRP wouldn't lemme backup Data)
reboot
changed Region
reboot
restored Backup in TWRP
dload L09C432B192
I still get L29C432B192 after all was done. So frustrated.

[Guide] [XT16XX] [Solve] G4+ Baseband/Network/Volte issue, Lost 1 IMEI & fingerprint

[Guide] [XT16XX] [Solve] G4+ Baseband/Network/Volte issue, Lost 1 IMEI & fingerprint
Important:
If you have IMEI=0, then this is the wrong thead. Follow this: [Guide] [XT16XX] [Solve] Moto G4/Plus IMEI=0 issue
This method is only tested on Nougat for now, for Oreo, new files will be needed.
Code:
#include <disclaimer.h>
/*
* Your warranty is now.......(wait a minute)........still valid?
*
* I am not responsible for bricked devices.
* YOU are choosing to make these modifications, and if you point
* your finger at me for messing up your device, I will laugh at you.
*/
This thread addresses the following problems:
Baseband version changed to some other country
Sim card getting detected, but no network
Both sims having a network but VoLTE doesn't work
G4 Plus turned to G4, i.e phone just shows one IMEI and no fingerprint
This method is only for the retail models of Moto G4/Plus, it may or may not work on any other models.
All of these issues have a common reason,
The modem files for your device has been corrupted/has some issue or have been changed to some other country.
Voltes isn't working since your baseband is of some other country and not Indian. If you have Indian baseband and still Volte doesn't work, then your modem files have been corrupted/ have some issues.
You have to push the modem, hw, fsg files for your own device.
We already had a thread addressing this issue, but it didn't have modem files for all baseband.
Finally, thanx to our fellow Moto G4 Plus users, for providing these files, we now have hw, modem, fsg files for all the five basebands i.e BRAZIL, LATAM, EMEA, INDIAN, and RETUSA.
Link to the files:
XT1640 [BRAZIL]:
Link: https://www.androidfilehost.com/?fid=11410963190603873179
md5: 8db666f13700e3d12b01051989e3f068
XT1641 [LATAM]:
Link: https://www.androidfilehost.com/?fid=11410963190603873829
md5: cab09417be82e508d0c54f54aac56498
XT1642 [EMEA]:
Link: https://www.androidfilehost.com/?fid=11410963190603873183
md5: e046d911b23c76cb88d5ccd7967d621f
XT1643 [INDIA]:
Link: https://www.androidfilehost.com/?fid=11410963190603873250
md5: d509c5a26305cc5261e707bdf91268e9
XT1644 [RETUSA]:
Link: https://www.androidfilehost.com/?fid=11410963190603873181
md5: 598191e577db1137df62ae996055f5da
Download modem, fsg, hw files according to your original baseband/device model.
Code:
Model Number Baseband
XT1640 BRAZIL
XT1641 LATAM
XT1642 EMEA
XT1643 INDIA
XT1644 RETUSA
Note: These files are extracted from the dual-SIM variant of Moto G4 Plus, so if you flash these on your Moto G4, these will work, but your device name will be changed to Moto G4 Plus (everything will still work fine, just your device will be treated as Moto G4 Plus by all apps) and if you flash these images on single SIM Moto G4 Plus, it will still work.
Pre-requisites:
You must be on Stock Nougat 7.0 (latest version preferred)
You must be rooted (install Elemental-X kernel first and then flash Magisk otherwise you will have boot issues)
Terminal app or adb drivers in PC/Laptop (I wouldn't recommend TWRP (official or unofficial as it has issues flashing hw.img)
Step 1: Download files
Download and place these files in your /sdcard directory.
/sdcard is the same as the Internal storage directory. Do not confuse it with micro Sdcard as it has its directory named as /external_sd
Step 2: Flash the files
Note: The below commands are to be typed in a terminal app or adb shell.
Q) How to type in adb shell?
A) Open command prompt in the folder where you have adb and fastboot installed and type:
Code:
adb shell
So lets start now!
Code:
su
This command it to get root access for the terminal/shell. Grant the root access and you will see that the $ symbol is replaced with # symbol which means that root access has been granted.
Code:
dd if=/sdcard/modem.img of=/dev/block/bootdevice/by-name/modem
dd if=/sdcard/fsg.img of=/dev/block/bootdevice/by-name/fsg
dd if=/sdcard/hw.img of=/dev/block/bootdevice/by-name/hw
Step 3: Flash the latest Stock ROM (April 2018)
That's it. After flashing, reboot and check your baseband. You would be on the baseband which you flashed in step 2.
Indian users, you will see INDIAN baseband if you flashed the files for it, and Volte would work.
Flash the latest Stock ROM from here: Stock N Firmware [Apr 01 Security Patch][fastboot]
Contributors:
@djumie and Erick Lima (for providing BRAZILIAN modem files)
@Nacoro and @Deivid_21 (for providing LATAM modem files)
@echo92 (for providing EMEA modem files)
@checksamir (for providing INDIAN modem files)
@Jleeblanch (for providing RETUSA modem files)
@Pranav (for testing the files)
@Heeth21 (and lastly, myself)
Also all the others who helped during the process
Complete Backup Zip/Script (All partitions)
Now since you have faced this issue, make sure to take a complete backup of all the partitions so that if you ever face an issue like this in future, you will always have your partitions with you to restore your device.
Here is the link to the thread to take complete backup of all partitions: [Guide] [XT16XX] Moto G4/Plus Complete Partition Backup/Restore Zip/Script
The above thread can backup/restore using TWRP flashable zip files for convenience.
reserved
Thank you for this guide, but unfortunately it didn't work. When I pushed the hw image my phone stop responding and I have to force a reboot with the power buttom. I will give up on this issue for now on. Thank you again.
I attached a logcat in case you can find something that could give an anwser about what happens after i push the hw img
Do I have to be on stock ROM for this to work? Can't it work when I'm on a custom ROM?
What happened was I flashed the latest arrow os build, which was faulty. I then clean flashed crdroid. After reboot, sim isn't working, and imei isn't showing anything. I restored my persist partition, with no result.
Any help?
Wow after Restoring Indian Baseband Volte works now.
Thanks Sir.
sxbino said:
Thank you for this guide, but unfortunately it didn't work. When I pushed the hw image my phone stop responding and I have to force a reboot with the power buttom. I will give up on this issue for now on. Thank you again.
I attached a logcat in case you can find something that could give an anwser about what happens after i push the hw img
Click to expand...
Click to collapse
There are a few more ways to make this work, so its too early to give up.
Are you on the latest Stock ROM (April 2018)? You need to be on the latest stock firmware for this to work as the files are extracted from the latest stock firmware.
1. Flash Stock ROM (latest version - April 2018) once again.
2. Flash official TWRP (I repeat official TWRP only).
3. Then go in Terminal of TWRP (Settings>Terminal), and then repeat step 2, but this time no need to type "su" command.
Edit: @sxbino, now that I have learnt a little to read logs, it appears that the logs doesn't contain anything about flashing those files.
Please collect logs from adb using the command:
Code:
adb logcat>log.log
This will start collecting and saving logs in a file named "log" which will be saved in the same folder where you have adb.
If you are using PC/Laptop to push the files, you can open 2 terminal/command prompt windows, one to collect logs and other to flash the files.
But is missing Brazil baseband.
I'm from Brazil and change mine for LATAM.
Does anyone have this files?
edjalmo said:
But is missing Brazil baseband.
I'm from Brazil and change mine for LATAM.
Does anyone have this files?
Click to expand...
Click to collapse
Right now, we haven't been able to get modem files for BRAZILIAN baseband. Will add them in the Google Drive link once they are available from fellow Brazilian users.
Edit: @edjalmo, BRAZILIAN modem files are now available.
CMKdaGreatest said:
Do I have to be on stock ROM for this to work? Can't it work when I'm on a custom ROM?
What happened was I flashed the latest arrow os build, which was faulty. I then clean flashed crdroid. After reboot, sim isn't working, and imei isn't showing anything. I restored my persist partition, with no result.
Any help?
Click to expand...
Click to collapse
You may try if you'd like to. It just didn't work for me(flashing/pushing those files on custom ROM) so I am asking to be on stock ROM.
All of the 64-bit Pie ROMs are causing this error. The developers are working hard to fix it.
I would recommend flash stock ROM. No need to worry about losing IMEI after flashing stock as now it is recoverable, the only condition is you should not try to restore somebody else's persist or efs partitions.
Heeth21 said:
You may try if you'd like to. It just didn't work for me so I am asking to be on stock ROM.
ArrowOS is causing some problem with efs partition. The developer Lyuu is working hard to fix it.
I would recommend flash sSock ROM. No need to worry about losing IMEI after flashing stock as now it is recoverable, the only condition is you should not try to restore somebody else's persist or efs partitions.
Click to expand...
Click to collapse
Somehow, I clean flashed crdroid again, this time restoring the efs partition right after ROM flash. Now my sim is working. Silly me
Update: BRAZLIAN modem files are now available and have been added to the drive link. OP has been updated.
Heeth21 said:
Right now, we haven't been able to get modem files for BRAZILIAN baseband. Will add them in the Google Drive link once they are available from fellow Brazilian users.
Edit: @edjalmo, BRAZILIAN modem files are now available.
Click to expand...
Click to collapse
Thank you very much
edjalmo said:
Thank you very much
Click to expand...
Click to collapse
@edjalmo, Please report back whether they worked or not. I have 2 pairs of modem files. If this one didn't work, I will upload the second pair of files.
Heeth21 said:
@edjalmo, Please report back whether they worked or not. I have 2 pairs of modem files. If this one didn't work, I will upload the second pair of files.
Click to expand...
Click to collapse
Yes! I tested and it worked! My model is XT1640.
Heeth21 said:
You may try if you'd like to. It just didn't work for me so I am asking to be on stock ROM.
ArrowOS is causing some problem with efs partition. The developer Lyuu is working hard to fix it.
I would recommend flash sSock ROM. No need to worry about losing IMEI after flashing stock as now it is recoverable, the only condition is you should not try to restore somebody else's persist or efs partitions.
Click to expand...
Click to collapse
The ArrowOS also broke the imei of my smartphone, I have tried everything but nothing, I hope that the developer of ArrowOS get a solution!
Heeth21 said:
Code:
#include <disclaimer.h>
/*
* Your warranty is now.......(wait a minute)........still valid?
*
* I am not responsible for bricked devices.
* YOU are choosing to make these modifications, and if you point
* your finger at me for messing up your device, I will laugh at you.
*/
This thread addresses the following problems:
Baseband version changed to some other country
Sim card getting detected, but no network
Both sims having a network but Volte doesn't work
G4 Plus turned to G4, i.e phone just shows one IMEI and no fingerprint
This method is only for the retail models of Moto G4/Plus, it may or may not work on any other models.
All of these issues have a common reason,
The modem files for your device has been corrupted/has some issue or have been changed to some other country.
Voltes isn't working since your baseband is of some other country and not Indian. If you have Indian baseband and still Volte doesn't work, then your modem files have been corrupted/ have some issues.
You have to push the modem, hw, fsg files for your own device.
We already had a thread addressing this issue, but it didn't have modem files for all baseband.
Finally, thanx to our fellow Moto G4 Plus users, for providing these files, we now have hw, modem, fsg files for all four basebands i.e LATAM, EMEA, BRAZIL, and INDIAN.
Here is the link to the files: https://drive.google.com/open?id=1NtOTKgmJIP_Ys26CYd9KBdwhWdGfbCqH
Download modem, fsg, hw files according to your baseband.
Note: These files are extracted from the dual-SIM variant of Moto G4 Plus, so if you flash these on your Moto G4, these will work, but your device name will be changed to Moto G4 Plus (everything will still work fine, just your device will be treated as Moto G4 Plus by all apps) or if you flash these images on single SIM Moto G4 Plus, it will still work.
Pre-requisites:
You must be on Stock Nougat 7.0
You must be rooted (install Elemental-X kernel first and then flash Magisk otherwise you will have boot issues)
Terminal app or adb drivers in PC/Laptop (I wouldn't recommend TWRP (official or unofficial as it has issues flashing hw.img)
Step 1: Download files
Download and place these files in your /sdcard directory.
/sdcard is the same as the Internal storage directory. Do not confuse it with micro Sdcard as it has its directory named as /external_sd
Step 2: Flash the files
Note: The below commands are to be typed in a terminal app or adb shell.
Q) How to type in adb shell?
A) Open command prompt in the folder where you have adb and fastboot installed and type:
Code:
adb shell
So lets start now!
Code:
su
This command it to get root access for the terminal/shell. Grant the root access and you will see that the $ symbol is replaced with # symbol which means that root access has been granted.
Code:
dd if=/sdcard/modem.img of=/dev/block/mmcblk0p1
dd if=/sdcard/fsg.img of=/dev/block/mmcblk0p16
dd if=/sdcard/hw.img of=/dev/block/mmcblk0p43
Step 3: Flash the latest Stock ROM (April 2018)
That's it. After flashing, reboot and check your baseband. You would be on the baseband which you flashed in step 2.
Indian users, you will see INDIAN baseband if you flashed the files for it, and Volte would work.
Contributors:
@echo92 (for providing EMEA modem files)
@checksamir (for providing INDIAN modem files)
@Nacoro and @Deivid_21 (for providing LATAM modem files)
@djumie and Erick Lima(for providing BRAZILIAN modem files)
@Pranav (for testing the files)
@Heeth21 (and lastly, myself)
Also all the others who helped during the process
Click to expand...
Click to collapse
I do not understand where to enter the commands, can you explain more detailed? does this also work for IMEI = 0?
luis dambrowski said:
I do not understand where to enter the commands, can you explain more detailed? does this also work for IMEI = 0?
Click to expand...
Click to collapse
Nope, if you have IMEI=0, go to this thread: https://forum.xda-developers.com/moto-g4-plus/how-to/guide-moto-g4-plus-imei0-issue-t3859068
If there is any problems like baseband/network after restoring IMEI, come to this thread.
Update: RETUSA modem files are now available and have been added to the drive link. OP has been updated.
I just installed the files of the Brazilian version, they worked perfectly in the g4 xt1626, only the part of tv does not appear because my model is the version no plus, but the baseband is now correct, brazilian version. I just have to thank Heeth21, his job in keeping a baseband database and etc is phenomenal, will help a lot of people.

[ROM][STOCK][PIE 9.0] Install stock Android Pie without unlocked bootloader

Hello everybody, I'm sharing this tutorial to how to force Android Pie installation on retail moto x4.
Warning: read all the steps carefully. I'm not responsible for your actions and you're on your own on this..
What you need to do this
At first, follow the commandments to change the firmware of a mobile phone:
You will need an SD card (minimum 2gb of memory) !!! IMPORTANT !!! - See step 3.1 if you don't have a SD Card
Check if the battery is above 80%
Make sure you have ADB + Fastboot drivers installed AND YOU CAN ACCESS IT FROM YOUR COMMAND PROMPT
Make sure you have the latest Motorola Drivers installed on your computer.
Tested on:
- XT1900-1 - Ok
- XT1900-4 - Ok
- XR1900-5 w/ Android 8.0 - Ok
- XT1900-6 w/ Android 8.1 - Ok
- XT1900-7 w/ Android 8.0 - Ok
Not working for:
- XT1900-2 Indian Variant
Let's do this.
Step 1
Understand that this Pie update zip does not work on devices running Android One (google_fi) or Amazon (AMZ), only Retail phones. No matter if you have already installed other systems on it, you have to be in a retail (better with locked bt).
If you are not in retail, I picked up the latest retail firmware to install. Flash it on your device before proceeding.
Warning: note If your actual version number (OPWS 99.999.99-99) is lower than you will download below. If your current version number is higher, the procedure will not work and you will have to abandon this tutorial unless you unlock your bootloader, and I do not recommend doing this since rollback can cause brick your device permanently.
For Retail Android 8.1
Firmware: https://moto.netlib.re/payton/PAYTON_OPWS28.46-21-16_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
For Retail Android 8.0 devices (devices which never updated to 8.1) -- thanks to Comby_sk
Firmware: https://moto.netlib.re/payton/PAYTON_OPWS27.57-40-25_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Android Pie Firmware: https://moto.netlib.re/payton/OTAs/ab_delta-Blur_Version.27.301.32-29.11.36.payton.retail.en.US.zip (don't download the step 2's file if you're downloading this. THIS IS ONLY FOR ANDROID 8.0 NOT 8.1)
-------
You will need this file too. Copy all text, create a notepad file with it's content and name it "Flash-all.bat".
Flash-all.bat: https://pastebin.com/pZ9ZteGX
Step 2
Skip to step 3.1 if you don't have a SD Card
After installing the Android 8.1 firmware on your device, download this ROM and place it at the root of your SD card.
Android Pie Firmware: https://moto.netlib.re/payton/OTAs/ab_delta-Blur_Version.28.271.24-29.11.36.payton.retail.en.US.zip
Step 3
Reboot your device to Fastboot, and start it on recovery mode (hold power button and press volume + -- don't hold both buttons simultaneously). When done, select "Apply update from SD card" and select the update package. The update is slow and it took more than 1 hour with me. Then sit back and relax while it's installed.
Step 3.1
If you don't have a SD Card, you should upload the file with a ADB command.
Download the file from Step 2 and put the file in the same directory where your adb is installed.
Restart your payton to recovery mode (hold power button and press volume + -- don't hold both buttons simultaneously). When done, select "Apply update from ADB" and them run this command from CMD:
HTML:
adb sideload path_to_your_file
this command can take about 40 to 60 minutes for the speed of uploading and installing the update.
Note: path_to_your_file should be the full file name where your downloaded zip are.
Step 4
To work everything perfect and with no bug after the upgrade:
I) Go to settings -> System -> Advanced -> Reset options -> Factory reset the device
II) If the phone stucks on motorola boot screen, soft reset it. (hold power button for ~15 seconds)
III) Do all the initial setup procedures, then update the all the pending Play Store apps, and restart the device.
After that, your device will be with the stock Android Pie installed. Congratulations.
Have you tried it with the bootloader blocked?
Just did it on my XT1900-6, working fine but i had to install the update via adb.
[XT1900-7][STOCK][PIE] Install stock Android Pie without unlocked bootloader
It looks that guide from OP can be used for installing stock Pie on XT1900-7 reteu model.
Step 1.
Install OPWS27.57-40-25 fastboot package (Blur_Version.27.301.32.payton.retail.en.US with october 2018 security patch) instead from OP
Step 2.
Install PPW29.69-26 OTA (Blur_Version.29.11.36.payton.retail.en.US) instead from OP
Will try tonight.
al3al3al3jandr0 said:
Have you tried it with the bootloader blocked?
Click to expand...
Click to collapse
this tutorial is for locked/blocked bootloader
-
Sorry i was wrong.
SebastKae said:
@Comby_sk The last one is linked to the same file than the OP?
Click to expand...
Click to collapse
No, it is different. OP file is "28.xx.xx" to "29.xx.xx". My file is "27.xx.xx" to "29.xx.xx".
27 = 8.0
28 = 8.1
29 = 9.0
XT1900-7 never had 8.1, only 8.0. For XT1900-7 upgrade from 27 to 29 is needed.
What is the process for xt1900-2? I am on latest october patch OPWS 27.57-40-3-15
Prinjal Dave said:
What is the process for xt1900-2? I am on latest october patch OPWS 27.57-40-3-15
Click to expand...
Click to collapse
No one, your blur version "27.306.16" hasn´t Pie OTA yet.
Comby_sk said:
No one, your blur version "27.306.16" hasn´t Pie OTA yet.
Click to expand...
Click to collapse
So i can't update to pie yet.... Right?
Prinjal Dave said:
What is the process for xt1900-2? I am on latest october patch OPWS 27.57-40-3-15
Click to expand...
Click to collapse
I've updated the thread with Android 8.0 options.
CypherPotato said:
I've updated the thread with Android 8.0 options.
Click to expand...
Click to collapse
Thanks
CypherPotato said:
I've updated the thread with Android 8.0 options.
Click to expand...
Click to collapse
I have XT1900-2 OPWS27.57-40-3-15
How to flash/update PIE using these files? both files through SD Card or manually using fastboot method?
Code:
For Retail Android 8.0 devices (devices which never updated to 8.1) -- thanks to Comby_sk
Firmware: https://moto.netlib.re/payton/PAYTON...LT_CFC.xml.zip
Android Pie Firmware: https://moto.netlib.re/payton/OTAs/a...tail.en.US.zip (don't download the step 2's file if you're downloading this. THIS IS ONLY FOR ANDROID 8.0 NOT 8.1)
Prinjal Dave said:
So i can't update to pie yet.... Right?
Click to expand...
Click to collapse
Right
zlebors said:
I have XT1900-2 OPWS27.57-40-3-15
How to flash/update PIE using these files? both files through SD Card or manually using fastboot method?
Code:
For Retail Android 8.0 devices (devices which never updated to 8.1) -- thanks to Comby_sk
Firmware: https://moto.netlib.re/payton/PAYTON...LT_CFC.xml.zip
Android Pie Firmware: https://moto.netlib.re/payton/OTAs/a...tail.en.US.zip (don't download the step 2's file if you're downloading this. THIS IS ONLY FOR ANDROID 8.0 NOT 8.1)
Click to expand...
Click to collapse
Same thing as the post says. Flash Firmware using fastboot and flash Android Pie Firmware from recovery
CypherPotato said:
I've updated the thread with Android 8.0 options.
Click to expand...
Click to collapse
I think, it won't work on all 8.0 versions. E.g. XT1900-2 OPWS 27.57-40-3-15 has different blur version "27.306.16", but Pie OTA needs "27.301.32".
Is this for xt19-1 or what
boonemeat said:
Is this for xt19-1 or what
Click to expand...
Click to collapse
for all devices
This doesn't work with large SD cards since recovery mode can't mount the external sd card. I tried with a 128gb one and it failed, luckily I had a 4GB one lying around.
Comby_sk said:
I think, it won't work on all 8.0 versions. E.g. XT1900-2 OPWS 27.57-40-3-15 has different blur version "27.306.16", but Pie OTA needs "27.301.32".
Click to expand...
Click to collapse
CypherPotato said:
for all devices
Click to expand...
Click to collapse
any suggestions?

How To Guide [TB-J706F] [ROM] ZUI 12.6 Offline easy install

Hello TB-J706F (aka XiaoXin Pad Pro) users !
Latest ZUI ROM cannot be found in the file repositories and on the Lenovo support site. However, you can download the initial version of ZUI for our tablet and update to the latest ZUI 12.6, getting 4 updates. However, in fact, we only need two of them. I kindly saved them for you and included in my superpack along with the necessary software.
Link: https://cloud.mail.ru/public/DHTp/9dm4g5e13
Second link: https://drive.google.com/file/d/1ELq8YIU1FRL_4OX5RSWba9m2korSRDxD
The archive contains all necessary soft:
Spoiler
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Adb & fastboot, lenovo USB drivers, flasher QPRST and detailed instructions (English) in pictures how to install QPRST and flash the initial ZUI - All-in-One. There are two updates in the folder OTA:
1update.zip - updates ZUI to v. 12.5 (first A 11 version);
2update.zip - updates ZUI 12.5 to 12.6 latest at this moment.
ZUI first ROM can be downloaded from here: https://mirrors.lolinet.com/firmware/lenovo/Tab_P11_Pro/TB-J706F/ - TB-J706F_CN_WIFI_USER_Q00018.0_Q_ZUI_12.0.335_ST_201103_qpst.zip
Attention !!! The first thing you must do is to make sure that your parameter in NV item 6858 is 01 or 00, otherwise the ZUI A11 will not boot (A10 can). How to do this, look guide: https://forum.xda-developers.com/t/check-region-unlock-p11-tb-j606f-l-n.4356451/ That guide advises also change country code, I have CN (China), it can be changed after first ZUI flashing, code ####6030# in Settings -- Search bar on top.
=== Manual ===​1. According to the pdf guide, flash the downloaded ZUI ROM. Boot, minimal offline initial settings, and you can see Desktop screen. If you need change region code to CN - go to Settings, insert ####6030#, маке choise from one point CN or PRC (People Republic China). This will reboot and clear the user's data (factory reset). Now you need to go to settings, become a developer, enable USB debugging. Also you need set right data (day, month and year).
2. On PC: unpack Adb Tools in folder, place 1update.zip & 2update.zip inside adb tools folder. Run the Command Prompt, check connect to device and command the tablet:
adb reboot recovery
In tablet's recovery select Apply update from ADB and on PC run command adb sideload 1update.zip. Wait for update process completion, then reboot into the system, patiently wait for the booting to complete. Now you have ZUI 12.5 on tablet.
3. Repeat the previous step using 2update.zip - adb sideload 2update.zip. Wait for completion, then reboot into the system.
Now you have latest ZUI 12.6 !
The ZUI looks much prettier, more comfortable and sleeker than the poor global firmware, and has more features.
P.S. The video shows the firmware process of changing NV item 6858 in the hex editor to install the ZUI, only for the younger version of the tablet. The process is the same for the P11 Pro.
Spoiler: Korean language
​
Thank you for this!
May I request for the update files? The link you provided is not working. Thanks!
o97601 said:
Thank you for this!
May I request for the update files? The link you provided is not working. Thanks!
Click to expand...
Click to collapse
Hi ! Checked it moment ago, link working: https://cloud.mail.ru/public/DHTp/9dm4g5e13
Spoiler
d1m-ON said:
Hi ! Checked it moment ago, link working: https://cloud.mail.ru/public/DHTp/9dm4g5e13
Spoiler
View attachment 5484189
Click to expand...
Click to collapse
Thank you but I think my location is not letting me to download the file. I have a problem though. I was trying to change the region code but the QFIL is not letting me to backup my QCN. I can't click the button. On the other hand, when I am using the NV Read and Writer, my phone is not communicating to it. Any help?
I don't think you should do it, it's too complicated for you. You can't even download my file via VPN and connect the tablet properly
Another link: https://drive.google.com/file/d/1ELq8YIU1FRL_4OX5RSWba9m2korSRDxD
P.S. You need flash ZUI from lolinet first, and second is connect tablet in DIAG mode, then backup .qcn and restore edited .qcn
I'm done backing up the QCN. But unfortunately, I cant find the hex code that it requires. I cut my chase and just stay with 12.5 for the mean time. Thank you!
After updating I get this screen and I can't do anything else.
Yes, I followed the instructions to the letter
Just flashed again to the original ROM.
d1m-ON said:
Hello TB-J706F (aka XiaoXin Pad Pro) users !
Latest ZUI ROM cannot be found in the file repositories and on the Lenovo support site. However, you can download the initial version of ZUI for our tablet and update to the latest ZUI 12.6, getting 4 updates. However, in fact, we only need two of them. I kindly saved them for you and included in my superpack along with the necessary software.
Link: https://cloud.mail.ru/public/DHTp/9dm4g5e13
Second link: https://drive.google.com/file/d/1ELq8YIU1FRL_4OX5RSWba9m2korSRDxD
The archive contains all necessary soft:
Spoiler
View attachment 5480323
Adb & fastboot, lenovo USB drivers, flasher QPRST and detailed instructions (English) in pictures how to install QPRST and flash the initial ZUI - All-in-One. There are two updates in the folder OTA:
1update.zip - updates ZUI to v. 12.5 (first A 11 version);
2update.zip - updates ZUI 12.5 to 12.6 latest at this moment.
ZUI first ROM can be downloaded from here: https://mirrors.lolinet.com/firmware/lenovo/Tab_P11_Pro/TB-J706F/ - TB-J706F_CN_WIFI_USER_Q00018.0_Q_ZUI_12.0.335_ST_201103_qpst.zip
Attention !!! The first thing you must do is to make sure that your parameter in NV item 6858 is 01 or 00, otherwise the ZUI A11 will not boot (A10 can). How to do this, look guide: https://forum.xda-developers.com/t/check-region-unlock-p11-tb-j606f-l-n.4356451/ That guide advises also change country code, I have CN (China), it can be changed after first ZUI flashing, code ####6030# in Settings -- Search bar on top.
=== Manual ===​1. According to the pdf guide, flash the downloaded ZUI ROM. Boot, minimal offline initial settings, and you can see Desktop screen. If you need change region code to CN - go to Settings, insert ####6030#, маке choise from one point CN or PRC (People Republic China). This will reboot and clear the user's data (factory reset). Now you need to go to settings, become a developer, enable USB debugging. Also you need set right data (day, month and year).
2. On PC: unpack Adb Tools in folder, place 1update.zip & 2update.zip inside adb tools folder. Run the Command Prompt, check connect to device and command the tablet:
adb reboot recovery
In tablet's recovery select Apply update from ADB and on PC run command adb sideload 1update.zip. Wait for update process completion, then reboot into the system, patiently wait for the booting to complete. Now you have ZUI 12.5 on tablet.
3. Repeat the previous step using 2update.zip - adb sideload 2update.zip. Wait for completion, then reboot into the system.
Now you have latest ZUI 12.6 !
The ZUI looks much prettier, more comfortable and sleeker than the poor global firmware, and has more features.
​
Click to expand...
Click to collapse
can i flash from row to zui 12.6?
Finally! Thank you!
datntien said:
can i flash from row to zui 12.6?
Click to expand...
Click to collapse
Yes! Just follow the tutorial
o97601 said:
Finally! Thank you!
Click to expand...
Click to collapse
Congrats! You are great!
datntien said:
can i flash from row to zui 12.6?
Click to expand...
Click to collapse
Sure, no problems.
Video added:
Spoiler: Korean language
d1m-ON said:
Congrats! You are great!
Click to expand...
Click to collapse
May I know where did you get the files in OTA? I am searching if there is already an update for zui 13.
o97601 said:
May I know where did you get the files in OTA? I am searching if there is already an update for zui 13.
Click to expand...
Click to collapse
I have been getting updates to my tablet via Wi-Fi and after downloading (before installing) I save the update file to the microSD. The update files arrive on the device in the .Zuiota folder (hidden folder).
Thanks for the guide. I have succeed and now I am running ZUI 12.6. I did the updates OTA instead using adb. I setted the internal country code to 00, I had ROW rom before and the code was 02. I used GFil and was straightforward. If you decide to stay with ROW rom I recommend change the setting ####6030# to any country but CN, because doing this the Play Store became certified and NetFlix can be installed from Play Store.
blagoon52 said:
Thanks for the guide. I have succeed and now I am running ZUI 12.6. I did the updates OTA instead using adb. I setted the internal country code to 00, I had ROW rom before and the code was 02. I used GFil and was straightforward. If you decide to stay with ROW rom I recommend change the setting ####6030# to any country but CN, because doing this the Play Store became certified and NetFlix can be installed from Play Store.
View attachment 5498519
Click to expand...
Click to collapse
This is great. I already have 12.6.133 for the longest time and haven't been able to receive another update in OTA. I don't know if it is capable or not.
tenthofmay said:
This is great. I already have 12.6.133 for the longest time and haven't been able to receive another update in OTA. I don't know if it is capable or not.
Click to expand...
Click to collapse
Seems that there is an update to Zui 13 for the Pad Pro, so I will confirm if I can get it through OTA.
d1m-ON said:
Hello TB-J706F (aka XiaoXin Pad Pro) users !
Latest ZUI ROM cannot be found in the file repositories and on the Lenovo support site. However, you can download the initial version of ZUI for our tablet and update to the latest ZUI 12.6, getting 4 updates. However, in fact, we only need two of them. I kindly saved them for you and included in my superpack along with the necessary software.
Link: https://cloud.mail.ru/public/DHTp/9dm4g5e13
Second link: https://drive.google.com/file/d/1ELq8YIU1FRL_4OX5RSWba9m2korSRDxD
The archive contains all necessary soft:
​
Click to expand...
Click to collapse
!!! No more need !!! Latest ROM is here: https://forum.xda-developers.com/t/lenovo-tb-j706f-zui-12-6-133.4383047/
tenthofmay said:
but the QFIL is not letting me to backup my QCN. I can't click the button
Click to expand...
Click to collapse
I have the same problem. Why don't you share your solution?
Edit: solved by running "qpst configuration" application, adding the device (second tab), right-click and click "switch to diagnostic mode" or something like that.
Then rebooted the device to FFBM mode.

Categories

Resources