Bootloader is unlocked.
TWRP 2.8.7.0 for 4.4 ( mobopx v2.2 ) is installed but somehow it is faulty.
I have two Nandroid Backups.
Phone was C00B137 4.4.2.
Phone doesn't boot so can't install any of those (UPDATE.APP) method updates. Stuck on huawei Ascend powered by android.
i CAN boot into twrp and fastboot (fastboot&rescue) .
TWRP backup works so i got two backup first one right after flashing the custom recovery, and another after everything wipe and an unsuccessful android 6 flash (B571) (phone booted into a clean 4.4.2 (what it was on) but empty motion control setting. and "update from usb storage" button removed from updater's app (the only way it installed that unsuccessful android 6 update ).
So, What was the dumb move?
That shouldn't happen.. when i selected everything to wipe, after that. Yeah. That's enough go read the rest.
.
.
.
What is it? What are you waiting for?
Why can't install any rom:
1- TWRP Restore does not work (does not find the backup).
TWRP ADB Sideload Probably doesn't work (i connect to pc then click the adb sideload, infinite loading until i cancel on phone. no device detected on windows).
2- Worst part : SD Card Does NOT get detected in TWRP.
The only way to transfer files to phone is through USB Storage (Otg).
3- As mentioned before, all complete updates are .app files. With This TWRP, only zip files can be installed (Which are just as suffix to the os, all are 100 mb, 300, 700mb, what is this? humans update is 1.2GB up to 2.2GB and more.) the TWRP Install works as i tried to install one of those zip update files, obviously unsucessfull (Zip signature Failed or something like this).
References:
The B571 rom i installed (that was finished but after reboot it was still 4.4.2 with bugs) is C432B571 Full OTA( Europe ) from this page.
The Twrp i used is Recovery mate7 mobopx v2.2 update and translate by chudy_85 on same page. number 7:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
the adb i use is shift right clicking on platform-tools folder -> open command prompt here. learnt from here. also unlocked boot loader according to that (although with help of honortuner ( https://forum.xda-developers.com/t/info-unlock-bootloader-recovery-root-noob-friendly.3453204/ ) ).
UPDATE:
1--This is the log of when i unlocked bootloader:
2-- ADB WORKED! At least in recovery (not that sideload button in advanced) :
What should i do now? how to flash UPDATE.APP through adb??
Should i first flash stock recovery then through huawei update (key combination) update using sd card The update.APP????????????????
but i will lose custom recovery so if it fail i will truly brick the phone this time. HELP!
no help for me?
Related
So after like months of waiting, ASUS finally released the LOLLIPOP upgrade for Zenfone 6 but unfortunately it's only for the TW version. So here, I'm gonna teach you how to change your SKU.
Follow my Instuction and You and your phone should be fine.
(Still, do it on your own risk, I'm not gonna be the one responsible for any damaged phone or damaged brain or whatsoever, I'm just trying to help so please try to appreciate it.)
WHAT YOU NEED
1.Rooted Zenfone
2.Installed ADB
3.Installed USB and Intel driver (Google it)
4.ADB fastboot tool
5.Recovery Image of the Firmware you want to change your SKU to, example : If you want to change from CN to WW download the WW recovery file.
Click HERE
6.Download the Firmware of the SKU you want to change to, like if you want to change to WW download the WW firmware. HERE
BEWARE : YOU MUST DOWNLOAD THE SAME VERSION OF RECOVERY WITH THE FIRMWARE YOU WANT OR ELSE YOU'LL BRICK YOUR DEVICE.
INSTRUCTION
1. Copy the recovery that you've download to the adb folder.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. Turn off your device and boot to droidboot (Press and hold Power + Volume [+] buttons) and then connect it to your pc.
3. Open cmd on adb folder. (Press shift+Right Click on the adb folder and dont close the cmd , we'll need it later.)
4.Do flash recovery img.
fastboot flash recovery [the recovery name].img
Click to expand...
Click to collapse
5. Reboot to Recovery, when you see the Android guy with exclamation mark press [+] and [-] volume button at the same time like 2 seconds and release.
6. Choose "apply update from adb" and then upload your firmware through cmd.
adb sideload [the firmware that you've downloaded earlier].zip
Click to expand...
Click to collapse
7. It will feel like it stuck but just wait for it.
8. do wipe data/factory reset
9. Reboot.
10. And you're done !!
How to change to upgrade to Lollipop 5.0
1. Please make sure to update your software version to V2.22.40.44 first before update to software version V3.23.40.52.
2. Download the firmware. Here
3. Extract it and make sure the zip file ended with "-user-" in the of it.
4. Put it on in the root of your internal memory.
5. Remove your phone from pc and an exclamation mark will appear on the statusbar.
6. Put your phone to Plane Mode and turn off wifi connection.
7. Apply the update, booting will take some time but just be patient.
8. YAYYYY YOU HAVE LOLLIPOP ON ZENFONE 6 !
SCREENSHOT ON SECOND POST.
SCEENIE(S)
You forgot to mention to flash fastboot.img as well.
am try to flash my phone with new recovery so now its not start
when power my phone on i got this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
am try to update it with more firmwares but always faild
and try also from fastboot and adb but i canot flash recovery or boot file
so please how can i fix it and make it working like before
thanks
My problem solved please admin close this thread
Please!! tell my how you did it. I have the same problem. Greatly appreciated.
I am just bothered by the same problem for days.
did some research in the meantime...it seems only a few other HAM7 owners ended up like we did.
Unfortunately none of them was able to get the phone back to life, even though it's "just" a soft brick.
bro my problem solved after am leave my phone on charger for 3 hours , before always failed but after recharge my phone for 3 hourse its working and make update with no errors
solved!!
Finally I managed to get the device back to life
Here's what I did:
1. get the latest ROM package for your device - this MUST be the ROM you had installed prior to the crash
2. extract the package with Huawei Update extractor
3. flash via fastboot a) the boot.img and b) the recovery.img (take those file from the extracted folder)
4. get a SD Card and put the update.app file into the dload folder in root directory (you have to create dload folder first)
5. put the SD Card into the device and force update via 3-button method (press Vol +, Vol - and Power at the same time)
6. Update should complete now (if you stuck with 90%, try a different ROM - for me it only worked with exactly the same package I've installed prior to the crash)
- That should be it....Can't tell you how happy I am, after 2 weeks I got my beloved Mate7 back.
sweetsmoke69 said:
Finally I managed to get the device back to life
Here's what I did:
1. get the latest ROM package for your device - this MUST be the ROM you had installed prior to the crash
2. extract the package with Huawei Update extractor
3. flash via fastboot a) the boot.img and b) the recovery.img (take those file from the extracted folder)
4. get a SD Card and put the update.app file into the dload folder in root directory (you have to create dload folder first)
5. put the SD Card into the device and force update via 3-button method (press Vol +, Vol - and Power at the same time)
6. Update should complete now (if you stuck with 90%, try a different ROM - for me it only worked with exactly the same package I've installed prior to the crash)
- That should be it....Can't tell you how happy I am, after 2 weeks I got my beloved Mate7 back.
Click to expand...
Click to collapse
Force update do not boot via 3 button method and go directly into rescue mode(FUNC_LOAD_IOM3). Is it possible to get my HAM7 life back?
acopo said:
Force update do not boot via 3 button method and go directly into rescue mode(FUNC_LOAD_IOM3). Is it possible to get my HAM7 life back?
Click to expand...
Click to collapse
You're sure you have the correct update.app in the dlaod folder of your sd-card? As I wrote before, for me it only worked when I had the exact same update.app (in my case it was the B324 Version).
But see the steps I've done before, I mean I flashed boot and recovery img - which I've extracted from the update package.
Honestly, I'm not 100% sure what finally solved my problem - I just tried to recall the steps I made.
Hey there,
I´ve received my used Oppo today and couldn´t do stuff with it so I decided to flash it with CM13 and after some more things I did, I couldn´t restore my backups properly anymore (why I find odd and this has never happened to me before). Then I decided to switch back to ColorOS 2 following the instructions on oppoforums.com. Somehow I think that when I finished step 4: To make a clean install please select "Wipe data and cache", press "Yes" when it's done. my entire internal storage was wiped :-/ instead of wiiping data and cache it turned off and on and so on....it didn´t boot into ColorOS so I went with booting into TWRP again. There I found that I can only see some folders of Interal Storage
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(open in new tab). I managed to adb-move the file "cm-13.0-20160311-NIGHTLY-r7plus.zip" into /sdcard and tried to install it from there which it apparently does successfully
.
When I click reboot -> system it still boots into TWRP everytime :crying:
How can I boot into an OS again? My computer recognizes my phone and I have adb access.
hmm... try use msm download tool
I have the same issue couple of days before... do this
Download Stock Recovery.
Boot in to fastboot
and flash stock recovery using this command fastboot flash recovery stock.img
After flash use command fastboot reboot
if you see wiping data and gone black screen then follow this....
Use this command. fastboot boot stockrecovery.img
now you can boot to stock recovery and you will see fully loaded wiping bar and it shoul reboot the phone. Now its done.
Power of the phone by press and hold. And boot to recovery asusal u do...flash the rom.
for qurey whatsapp me +919790397283
sriszone said:
I have the same issue couple of days before... do this
Download Stock Recovery.
Boot in to fastboot
and flash stock recovery using this command fastboot flash recovery stock.img
After flash use command fastboot reboot
if you see wiping data and gone black screen then follow this....
Use this command. fastboot boot stockrecovery.img
now you can boot to stock recovery and you will see fully loaded wiping bar and it shoul reboot the phone. Now its done.
Power of the phone by press and hold. And boot to recovery asusal u do...flash the rom.
for qurey whatsapp me +919790397283
Click to expand...
Click to collapse
Thanks, this actuually did it for me! I tried adb sideload, but that didn´t work.
https://goo.gl/photos/vSRMhRjyxr4MW8CA7
No ... Dont side load.
Just boot to twrp. Not flash.
Go to Fastboot. and boot . use this command. fastboot boot twrp.img
then you can mount internal storage.
hello
how are you all ?
first i have mate 8 NXT-29C185B200 (emui 4.0)
i do UnlockBootloader By SRK Tool , then i installed TWRP recovery, then i installed root. untill this moment everything OK
but i do wipedata, wipcashe, and internal storage By TWRP recovery, then this problem appeared
I've lost icons of the basic programs, and programs lost Huawei, backgrounds.
I tried install official rom, install unofficial, and lockbootloader then install update.app
but not solved the problem
can anyone help me please ?
and i am sorry my English is poor
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i find slove here https://forum.xda-developers.com/showpost.php?p=68624000&postcount=2
is's worked 100% thank you bro
but how restore some app same health app
Hi , can u guide me how to restore them using utilities of srk tools
Regards
h4ni said:
Hi , can u guide me how to restore them using utilities of srk tools
Regards
Click to expand...
Click to collapse
Download SKRTool
then go utilities (number 7) > then write number 12 then enter . and continue
3zoz said:
hello
how are you all ?
first i have mate 8 NXT-29C185B200 (emui 4.0)
i do UnlockBootloader By SRK Tool , then i installed TWRP recovery, then i installed root. untill this moment everything OK
but i do wipedata, wipcashe, and internal storage By TWRP recovery, then this problem appeared
I've lost icons of the basic programs, and programs lost Huawei, backgrounds.
I tried install official rom, install unofficial, and lockbootloader then install update.app
but not solved the problem
can anyone help me please ?
and i am sorry my English is poor
Click to expand...
Click to collapse
Root
Step by Step Guide
1.
Download files (supersu_v2.79_sr2.zip)
1.3- http://www.sillanwali.com/downloads/supersu_v2.79_sr2.zip
2-
Copy this file (supersu_v2.79_sr2.zip) into SD Card
3-
Download TWRP Recovery 3.0.2-0
http://sillanwali.com/downloads/twrp-3.0.2-0-next.img
4-
adb devices
adb reboot bootloader
fastboot flash recovery (PATH-TO)\twrp-3.0.2-0-next.img
5-
5.1- Reboot your phone to TWRP then choose Wipe > format > type Yes
5.2- Back again, then wipe (data, dalvik, cache, system)
5.3- Don't reboot after install
6-
Install
6.1- supersu_v2.79_sr2.zip (Don't reboot after install)
7-
Hope rooted
8-
Hi everyone
Firstly I'd like to thank this forum and all the contributors that posted. Without these useful information I wouldn't able to unbrick my phone.
I'd like to share my experience with "Error! Func NO:12 (FUNC_LOAD_IOM3) Error NO:1". and e:could not mount data and "unable to find crypto footer"
My phone had this error in the past and it has successfully unbricked.
This took me two weeks, I've tried every single guide I can find online, somehow I got it to work.
I hope my post will help you towards fixing your issue.
(Its strange for people like you and me still fiddling with our mate 7s in 2018 )
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have a MT7-UL00 with 6.0 marshmellow B561. I was trying to downgrade to 5.1. I was following a downgrade guide and was told I need to card flash (power, vol + and vol -) a B500 update.app rom via SD card first in order to downgrade.
I failed because of two reasons, I connected my USB to my pc when trying to flash it and my SD card was in FAT format rather than NTFS.
After my card flash failed I used HuaweiUpdateExtractor_0.9.9.5 to repack the B500 update.app and flashed it by using TWRP, and this bricked my phone.
(There might be other things I've done in the interim like wipe all partitions etc, I don't remember the steps on how I bricked it)
I start to get Error! Func NO:12 (FUNC_LOAD_IOM3) Error NO:1 and I can not re-enter recovery mode
I rebooted to fastboot mode (power and vol -), and flashed TWRP 2.8.7.0 and pressing (vol +, vol - and power) I was able to get into TWRP.
In TWRP, I cannot do any wipe or repair or reformat, I get an error message "e:could not mount data and "unable to find crypto footer"
I've reflashed twrp-v1-hi3630.img and reformatted the all the partitions and fixed the mount issue.
https://www.youtube.com/watch?v=cvXbzhJEan8
I've then followed the downgrade process to downgrade from 6.0 to 5.1
I've rebooted into fastboot and flashed stock B561 rom using fastboot. (I can not find any stock 6.0 update.app rom)
(After this step somehow TWRP 3.0 stopped working, I have to downgrade to 2.8.7.0, but I don't think you require to do this to complete the following steps)
(Your recovery should be back to stock standard, if not you need to flash your recovery back to Huawei recovery)
Then I flashed B500 using card flash (reformat SD card to NTFS, put dload folder in root path in SD card, unplug usb cable, press vol +, vol - and power to flash)
Then I flashed B351 using card flash (same process)
Then the phone recovered. I was able to boot into the OS with android 5.1.
I hope this information helps you to unbrick your phone.
Good luck.
Will give this a try, am also in that same problem. Hope the phone wakes up