Hello, i have a really weird problem. When the phone is power up and working i can adb devices and see in the list my phone,. But when im in fastboot adb devices show empty. The phone is recognized in my device list with the drivers in fastboot mode.
I have installed a lot of drivers
i have tried in windows 10 and windows 7
thanks in advance.
When you're in fastboot mode you need to use the fastboot command, not ADB...
Try fastboot devices.
Related
I am trying to unroot and re-lock my xoom and everytime I try to use a fastboot command all I get at the command promt is "waiting for device". I have installed the moto drivers and adb is working fine, just no fastboot. Please help... Thanks in advance!
did you reboot your xoom into bootloader mode? (adb reboot bootloader)
does it show any devices when you type
adb devices
Yes,
adb devices returns the attached device with the serial number.
adb reboot bootloader reboots the device and it say starting fastboot protocol at the top. then when I try to use fastboot flash boot boot.img or any other fastboot command all it does is say waiting for device and that's it..
usb debugging is on? should be if you see the device with adb devices
try to flash another cwm - like rogue version
if you do that - same error?
./adb reboot bootloader
./fastboot flash recovery recoveryroguecwm.img (change real filename )
well, usb-debugging has no effect whatsoever on fastboot.
personally, I suspect a problem outside of the xoom. Have you installed the current motorola drivers using driverhelper? If not, please do so. Please make sure any firewall or anti-virus-software on your computer is disabled or uninstalled.
If you have the possibility, you should try fastboot with another computer.
btw: I'd try if fastboot works with the command fastboot devices. This should return a list of connected and detected devices.
Thanks! For some odd reason my driver needed to be re=installed. After I did that a restarted my computer everything works as it hasin the past!
Should I be able to find my adb device while my phone is only booting to HBOOT 0.93.0001?
Been stuck on this for days...and it's killing me!
PS. When I plug my phone in to
PC it says "Android ADB interface installed" "Ready to use"
But when I cmd the adb to find devices "adb devices" it shows blank
Use "fastboot" to connect to phone booted into HBOOT
When your phone is in HBOOT then it only accepts commands from the application "fastboot".
It also handles fastboot commands different depending if you are in Fastboot or Bootloader mode.
Search XDA for fastboot for your operating system.
A Windows system might recognize your phone as"adb device" as fastboot uses the same drivers as adb. However, your phone has another USB id and so the command adb will not find it.
Best regards,
Catherall
I have rooted my Nexus 7 but while ADB is recognized and responds to commands, Fastboot is not. However, when booting into bootloader the Nexus indicates its in Fastboot mode but thats it. How do I get Fastboot to be recognized from pc? Help!!
re
oakcutter said:
I have rooted my Nexus 7 but while ADB is recognized and responds to commands, Fastboot is not. However, when booting into bootloader the Nexus indicates its in Fastboot mode but thats it. How do I get Fastboot to be recognized from pc? Help!!
Click to expand...
Click to collapse
i think is the driver, because fastboot use another driver. try in device manager to search for a right driver
Hi guys,
Looking for a genuis here...I've spent the last few days trying to work this puzzle out:
Installing GrapheneOS onto Pixel 3 phone using Windows 10, using command line tools only. Android Studio is not installed on the PC.
Here's what I've done so far...downloaded:
The Pixel image - GrapheneOS stable channel for Pixel 3
ADB & fastboot
First we downloaded fastboot (ADB, Android SDK platform-tools for Windows): https://developer.android.com/studio/releases/platform-tools - had an issue with the fastboot flashing unlock command...it doesnt unlock the device, instead says <waiting for any device>
Then we deleted the SDK platform tool and installed Minimal ADB & Fastboot and the same darn issue happened - the fastboot flashing unlock command doesnt unlock the device... command prompt says <waiting for any device>
The device is carrier unlocked, OEM unlocking enabled, USB debugging enabled, File transfer (MTP) mode on.
The following commands work with the SDK platform-tools & minimal ADB & Fastboot: adb devices, adb reboot bootloader
The block is the command: fastboot flashing unlock as we keep getting <waiting for device>.
Tried to fix this myself, here's what has been tried so far (not necessarily in this order):
Checked Fastboot version... fastboot --version works for both downloads so it's recognising it! Wahoo.
Used command prompt & powershell - when it gets to the fastboot flashing unlock command the response is always <waiting for device>
Checked the PATH (in control panel / advanced setting) and made sure environmental variable goes to the right folder
Downloaded Google USB Driver - nothing changed, we already had up-to-date drivers
Tried to change the fastboot script, click to open the fastboot file, when I click "open" the command prompt pops up, red error message flashes then the command prompt window closes in the blink of an eye. I then turned off Windows secuirty setting for app, same thing still happens.
Tried all USB ports with USB-C cable - same error <waiting for device>
Tried all USB ports with anotehr USB-C cable - same error <waiting for device>
Please help!
The ‘waiting for device’ is generated by Fastboot on PC when it can’t detect your device / can't communicate with phone's bootloader.
If the matching "Android USB Driver" got installed on PC, if latest Fastboot driver got installed on PC, too, and if you have rebooted PC afterwards at least once, then Fastboot should work if USB-cable that came with phone is used.
Hint: Try a different USB port on PC.
jwoegerbauer said:
The ‘waiting for device’ is generated by Fastboot on PC when it can’t detect your device / can't communicate with phone's bootloader.
If the matching "Android USB Driver" got installed on PC, if latest Fastboot driver got installed on PC, too, and if you have rebooted PC afterwards at least once, then Fastboot should work if USB-cable that came with phone is used.
Hint: Try a different USB port on PC.
Click to expand...
Click to collapse
Thansk so much for your reply! I have a few questions though...
I think it can communicate with the device as "adb reboot bootloader" turn the phone off and puts it into fastboot mode?
What is a macthing Android USB Driver? In Device Manager the pixel 3 appears under "portable devices" so I assume that means we have a driver for the device?
Thanks again!
Redsquirrel77 said:
Thansk so much for your reply! I have a few questions though...
I think it can communicate with the device as "adb reboot bootloader" turn the phone off and puts it into fastboot mode?
What is a macthing Android USB Driver? In Device Manager the pixel 3 appears under "portable devices" so I assume that means we have a driver for the device?
Thanks again!
Click to expand...
Click to collapse
Whether phone got booted into fastboot / bootloader mode via command
Code:
adb reboot bootloader
or not can only get verified by command
Code:
fastboot devices
Your Google Pixel device is based on Qualcomm SDM845 Snapdragon 845 chipset, hence the "Android USB Driver" I mentioned must match this chipset.
Download Qualcomm HS-USB QDLoader 9008 Driver (2022)
Want to connect your Qualcomm powered phone to computer? Here you can download Qualcomm HS-USB QDLoader 9008 Driver with installation guide.
www.ytechb.com
jwoegerbauer said:
Whether phone got booted into fastboot / bootloader mode via command
Code:
adb reboot bootloader
or not can only get verified by command
Code:
fastboot devices
Your Google Pixel device is based on Qualcomm SDM845 Snapdragon 845 chipset, hence the "Android USB Driver" I mentioned must match this chipset.
Download Qualcomm HS-USB QDLoader 9008 Driver (2022)
Want to connect your Qualcomm powered phone to computer? Here you can download Qualcomm HS-USB QDLoader 9008 Driver with installation guide.
www.ytechb.com
Click to expand...
Click to collapse
Thanks so much, I think we are getting closer to success!
Qualcomm USB driver downloaded and successfully installed.
Update since the Qualcomm USB driver download:
adb reboot bootloader command works - phone goes into fastboot mode
fastboot devices - no response (new command line)
fastboot - -version shows version and installation
fastboot flashing unlock response is still <waiting for any device>
Used command adb shell getprop ro.boot.cid and response is 00000000
Response should be 11111111 if it's a Google phone...is this my issue? Or does it help explain why fastboot isn't working?
Fastboot operates on device's bootloader only if unlocking bootloader isn't denied. Makes sense,, doesn't it?
Me and all my friends always test this by running
Code:
adb devices
adb shell "getprop ro.oem_unlock_supported" <- on some devices: adb shell "getprop sys.oem_unlock_allowed"
If returned value is 1 - or true, then it's supported otherwise it's not.
Hi,
I don't know if it will help but try this.
PROBLEM
I tried all manner of ADB drivers and fastboot drivers for the last 4 hours just so that I am able to oem unlock this OnePlus device.
I have all OnePlus drivers installed. I have the ADB drivers installed from here. With all these I was able to run adb commands on the phone when it was on including commanding the phone to enter into EDL mode, commanding the phone to reboot into bootloader (fastboot mode). However in once in Fastboot mode, I could not communicate with phone and all I got was "waiting for device".
SOLUTION THAT WORKED FOR ME
It could be a computer brand model. Turns out the problem was not Windows. The problem was not Oneplus. The problem was my Lenovo Thinkpad which apparently requires its own Lenovo USB drivers.
If at all you're on Lenovo machine and you're stuck on "waiting for device" in Fastboot mode despite trying everything, then try installing Lenovo USB Drivers. I would recommend installing the generic ADB drivers first from here. Then installing the Lenovo drivers that are specific to you machine from here. Mine is Thinkpad.
I really hope this helps if not you, then someone else just about to pull their hair out.
Hey guys, as stated in the title i am unable to unlock my bootloader. The adb devices works up to the point where i boot into fastboot or recovery then it stops working. If i use the command it just says "waiting for any device" I want to install TWRP and change to LineageOS but the bootloader is bottlenecking me hard... any tips would be much appreciated!
Run
Code:
adb devices
adb reboot fastboot
fastboot reboot fastboot
fastboot devices
If this doesn't fix your issue then on Windows PC install the "Android USB Driver" suitable for the phone provided by OEM / Carrier.
jwoegerbauer said:
Run
Code:
adb devices
adb reboot fastboot
fastboot reboot fastboot
fastboot devices
If this doesn't fix your issue then on Windows PC install the "Android USB Driver" suitable for the phone provided by OEM / Carrier.
Click to expand...
Click to collapse
Thank you for your response, found the problem. It was the Qualcom drivers not being signed so after i put test mode on on PC it worked. Thanks for the advice!