Related
[[ROM][PORT][ LOLLIPOP 5.0]- [2.1] FUNTOUCH OS 2.1- ULEFONE BE TOUCH 2
This is yet another Port by me for Ulefone Be Tocuh 2 , This is ported from Vivo X5 Pro D
*************** Please take a Backup before proceeding ***********************!!!!DISCLAIMER:Rooting your phone and using custom ROMS have risks, You may brick your Device if instructions not properly followed .I will not be responsible for any brick devices , It is always advisable to make a backup of your phone before proceeding ....Blah blah ......blah !!!!!
KEY FEATURES OF ROM
• Smooth and Good looking
• New UI with new features
• Smooth Touch , Fast . Battery Saver
• Optimization done with L Speed 3.0 ( Credits goes to XDA LSpeed Developers and team @skyinfo @F4uzan @aidasaidas75 @skyinfo @Maltonator @k1ks @slaid480 @ArjunrambZ @pizza_dox @k1ks @Plamb1r @SecDet @Exit_Only @ansebovi- Thanks to their efforts .
• Firmware changed with TCL M2M Phone (excluding Modem)
• Modem Changed to Sony C4 ( no more wifi and connection drop problem)
• Good Camera UI with beauty and other features
• Chinese and English Language only.
• All Bloatware removed
• Antutu Score 45000+
• Music Player and Sound improved
Bugs – Error message while connecting phone to laptop /PC with SD storage mounted “ Vivo service stopped . Click ok and Rom works as normal , if you want to go any other mode click ok fast and switch to other USB mode fast .
Not completed – Finger Sensor Support ..I have decoded the code but needs guidance to recompile and infuse help needed from senior developers. If anyone wants to help please PM me.
INSTRUCTIONS:
1. Download Rom and copy to Sd card
2. Reboot into TWRP Recovery
3. Go to Wipe Option in TWRP
4. Go to Advanced Format option
5. Choose cache ,Data ,System and Dalvik cache partition and swipe for Formatting.
6. Flash ROM = wait until finish
7. First time boot after flashing takes time ..please be Patient
Note :::: Please Do NOT Auto Update .Vivo Will try to push update for its Vivo Phone thinking that it is Vivo X5 Pro .. but It is not ::laugh:GAPPS INSTRUCTIONS:
Please use only GAPPS given in the thread any other GAPPS will not work due to limitation in the system partition which Mr Ulefone created small size of System Partition .If you encounter Google Play service error after flashing GAPPs Run the APK given .Install Gapps after Flashing the ROM if service error ..Install the Google Service APKL-Speed Installation:
1. Download L_SPEED_V3.2_OVERSEER_arm and copy to Sd card
2. Reboot into TWRP Recovery
3. Go to Wipe Option in TWRP
4. Go to Advanced Format option
5. Choose cache ,Dalvik cache partition and swipe
You may see the noticible difference after installation the package , Please Convey Thnaks to develpoers who were part of the project for lollipop 5DOWNLOADS
ROM
https://mega.nz/#!rJglDQbL!WkKMhXDeWa_mu8ZnV0alV23toua-hAksFaaWfHkM5ew
GAPPS
https://mega.nz/#!XBpAzRiS!Ozj59WvF...Bqw4lswfpR6Rsga6xH_pnswIflEgkBfiSIzI[/CENTER]
awesome
Thanks for a new rom for the device. The rom download is in progress, but the gapps requires a password to decrypt.. Hopefully someone can help assist with the finger print scanner as im sure the rom would be perfect. I enjoy your other ports and thats the only thing lacking in them all. Cheers !:good:
dr3adl0ckd said:
Thanks for a new rom for the device. The rom download is in progress, but the gapps requires a password to decrypt.. Hopefully someone can help assist with the finger print scanner as im sure the rom would be perfect. I enjoy your other ports and thats the only thing lacking in them all. Cheers !:good:
Click to expand...
Click to collapse
Thanks Mate ..links updated again
shanky76 said:
Thanks Mate ..links updated again
Click to expand...
Click to collapse
np. sir You do great work, i barely seen your reply but found the gapps was gonna go and update here and the other site you post too as well as i wasn't sure when you would get back on. I work for a web hosting company using linux servers and what not. Not sure if it would work like this but since its a port, is it possible to use the "working directory" for the finger printer scanner from say maybe the elephone p7000 port rom for the ulefone to your rom's finger print "working directory" since it does indeed work on that rom as it has the same hardware as our device? I tried google searches to see where that information is placed in the rom system directory but could not find anything.
best regards,
dr3adl0ckd said:
np. sir You do great work, i barely seen your reply but found the gapps was gonna go and update here and the other site you post too as well as i wasn't sure when you would get back on. I work for a web hosting company using linux servers and what not. Not sure if it would work like this but since its a port, is it possible to use the "working directory" for the finger printer scanner from say maybe the elephone p7000 port rom for the ulefone to your rom's finger print "working directory" since it does indeed work on that rom as it has the same hardware as our device? I tried google searches to see where that information is placed in the rom system directory but could not find anything.
best regards,
Click to expand...
Click to collapse
There are number of changes required . I can send you the changes if you like ...
boot .img .. decompile make the changes for Finger print sensors.
ETc, Lib , Bin , App these are the places where we need to make changes ... not getting enough time to do all these ..I will try once festive season is over in india
Tutorial with video
I want upgrade vivo x3s , but i cant... give me tutorial with video ... because im newbie.
Thsnks......
Sir i'm new in flashing roms and stuff, i have a 4.4.4 Kitkat phone that doesn't have lolipop update, how do i make this my ROM?
how do we download marshmallow for vivo x5pro? the links that are provided they promted you to fill a survey, but when you click on it says error. havent been able to find a way to download the roms for vivo x5 pro. any help please?
shanky76 said:
[[ROM][PORT][ LOLLIPOP 5.0]- [2.1] FUNTOUCH OS 2.1- ULEFONE BE TOUCH 2
This is yet another Port by me for Ulefone Be Tocuh 2 , This is ported from Vivo X5 Pro D
*************** Please take a Backup before proceeding ***********************!!!!DISCLAIMER:Rooting your phone and using custom ROMS have risks, You may brick your Device if instructions not properly followed .I will not be responsible for any brick devices , It is always advisable to make a backup of your phone before proceeding ....Blah blah ......blah !!!!!
KEY FEATURES OF ROM
• Smooth and Good looking
• New UI with new features
• Smooth Touch , Fast . Battery Saver
• Optimization done with L Speed 3.0 ( Credits goes to XDA LSpeed Developers and team @skyinfo @F4uzan @aidasaidas75 @skyinfo @Maltonator @k1ks @slaid480 @ArjunrambZ @pizza_dox @k1ks @Plamb1r @SecDet @Exit_Only @ansebovi- Thanks to their efforts .
• Firmware changed with TCL M2M Phone (excluding Modem)
• Modem Changed to Sony C4 ( no more wifi and connection drop problem)
• Good Camera UI with beauty and other features
• Chinese and English Language only.
• All Bloatware removed
• Antutu Score 45000+
• Music Player and Sound improved
Bugs – Error message while connecting phone to laptop /PC with SD storage mounted “ Vivo service stopped . Click ok and Rom works as normal , if you want to go any other mode click ok fast and switch to other USB mode fast .
Not completed – Finger Sensor Support ..I have decoded the code but needs guidance to recompile and infuse help needed from senior developers. If anyone wants to help please PM me.
INSTRUCTIONS:
1. Download Rom and copy to Sd card
2. Reboot into TWRP Recovery
3. Go to Wipe Option in TWRP
4. Go to Advanced Format option
5. Choose cache ,Data ,System and Dalvik cache partition and swipe for Formatting.
6. Flash ROM = wait until finish
7. First time boot after flashing takes time ..please be Patient
Note :::: Please Do NOT Auto Update .Vivo Will try to push update for its Vivo Phone thinking that it is Vivo X5 Pro .. but It is not ::laugh:GAPPS INSTRUCTIONS:
Please use only GAPPS given in the thread any other GAPPS will not work due to limitation in the system partition which Mr Ulefone created small size of System Partition .If you encounter Google Play service error after flashing GAPPs Run the APK given .Install Gapps after Flashing the ROM if service error ..Install the Google Service APKL-Speed Installation:
1. Download L_SPEED_V3.2_OVERSEER_arm and copy to Sd card
2. Reboot into TWRP Recovery
3. Go to Wipe Option in TWRP
4. Go to Advanced Format option
5. Choose cache ,Dalvik cache partition and swipe
You may see the noticible difference after installation the package , Please Convey Thnaks to develpoers who were part of the project for lollipop 5DOWNLOADS
ROM
https://mega.nz/#!rJglDQbL!WkKMhXDeWa_mu8ZnV0alV23toua-hAksFaaWfHkM5ew
GAPPS
https://mega.nz/#!XBpAzRiS!Ozj59WvF... someone port this Funtouch OS to HTC one m7?
Click to expand...
Click to collapse
Can I install this on my vivo y28 ?
My phone SM-J110h How support ViVO rom
kernel version ??
CLEAN OS FOR XPERIA E5
TESTED ON F3311 , BUT WORK ON F3313 TOO
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed.
Features :
ANDROID 6.0.X
DEBLOATED
QUICK BOOT
OTG IN RC8 AND LATER
LONG TIME SUPPORT
RC16 - BE ANDROID 7.X.X OR ANDROID O (ONLY AS UPDATE TO THIS ROM!! , OTHER ROMS NOT SUPPORTED)
NO TRASHES FROM SONY AND OTHER
SMALLER SIZE OF INSTALLER
BETTER WORKING AND STABLE ANDROID
AND OTHER
WORKING :
WORKING 90% OF FEATURES
NOT WORKING :
Nfc icon dosen't show up in quick settings
phone keypad are stopped
Keypad , NFC , and other problems be repaired in RC10 .
Now system is cleaning, stabilizing and updating ...
WHAT YOU NEED :
UNLOCKED BOOTLOADER , RECOVERY
WIPE DATA , SYSTEM , CACHE , DALVIK AND ART
DOWNLOAD AND INSTALL TOOLS : https://forum.xda-developers.com/android/development/root-sony-xperia-e5-f3311-t3584813
IF YOU ARE READY SCROLL DOWN
1. UNLOCK BOOTLOADER
FLASH BOOT IMG
FLASH RECOVERY
GO TO RECOVERY
IN RECOVERY WIPE DATA , SYSTEM , CACHE , DALVIK AND ART
MAKE BACKUP OF BOOT IMG (VERY IMPORTANT)
CONNECT YOUR PHONE TO PC
DOWNLOAD ANDROID HERE : https://drive.google.com/file/d/0B0j-ruvmukWhTV9vUEdJNzRlOEE/view?usp=sharing
AND NOW GO TO YOUR EXTERNAL SD CARD ,
OPEN FOLDER : TWRP\BACKUPS\XXXXXXXXXX
XXXXXXXXXX - IS YOUR DEVICE
IN XXXXXXXXXX EXTRACT DOWNLOADED THE ZIP (EXTRACT ONLY FOLDER WITH FILES TO XXXXXXXXXX NOT FILES FROM FOLDER !! )
GO TO RESTORE , (YOU MUST HAVE FLASHED SYSTEM AND DATA)
RESTORE ANDROID
FLASH ZIP WITH ROOT (SUPERSU)
THAT'S ALL
REBOOT DEVICE , FIRST BOOT MAX 40 MINUTES
HAVE FUN
DOWNLOAD
https://drive.google.com/file/d/0B0j-ruvmukWhTV9vUEdJNzRlOEE/view?usp=sharing
IF OTG NOT WORK ON YOUR PHONE , GOOGLE AND XDA HELP YOU
THIS ANDROID HAVE OTG SUPPORT
RC 8.1 HAVE ADDED NEW APPS (LOOK ON SCREENSHOT)
RC 8.1 HAVE :
QUICK BOOT ADDON (KERNEL)
Increase the overall touch response (KERNEL)
Battery Save (KERNEL)
Disable debugging notification icon in the status bar (KERNEL)
Signal (3G) tweaks (KERNEL)
Fix some application issues (KERNEL)
NEW SYSTEM TASKS (KERNEL)
WORKING DIALER
IMPORTANT !!
ROM HAVE SECOND DIALER , AND PLEASE USE ONLY NON STOCK DIALER , AND ALLOW ALL PERMISSIONS FOR THIS DIALER FOR GOOD WORKING AND USE AS DEFAULT !!
DO YOU WANT TO KNOW MORE ???? LOOK ON SCREENSHOT ( SCREENSHOT IS NOT UPDATED DAILY !! ) . 90% IS INSIDE THE KERNEL , NOT A SYSTEM !!
RC 8.1 SOON
RC9 - SOON AFTER RC 8.9
READ ME !!
INSTALL KNOW HOW LOOK UP !!
IF YOU HAVE MY OS READY TO RESTORE WIPE ONLY SYSTEM
AFTER WIPE, RESTORE SYSTEM AND OTHER FILES WITH KERNEL
IF YOU DON'T RESTORE KERNEL OR OTHER FILES YOU BRICK PHONE
THIS IS RE-SET OS
AFTER FIRST START ALLOW ALL FOR LAUNCHER AND NEW DIALER (VERY IMPORTANT)
IN FIRST BOOT YOU HAVE BOOTLOOP FOR MAX FEW MINUTES ( DON'T WORRY, DON'T CRY AND DON'T PANIC , NEXT IS BLACK SCREEN (WAIT 2 MINUTES) )
AFTER 2 OR 3 MINUTES OPEN YOUR PHONE
IF YOU HAVE A BLACK SCREEN DISCONNECT BATTERY AND CONNECT BACK
CLOSE YOUR PHONE , TURN ON PHONE AND WAIT
PHONE START NORMAL BOOT , AND YOUR OS BE WORK PERFECT
FIRST BOOT HAVE OPTIMIZING APPS , THAT'S A MOMENT
HAVE FUN , YOU HAVE READY TO USE PHONE (AFTER ALLOW ALL PERMISSIONS FOR APPS)
FIRST BOOT IS LONG , WAIT
IF YOU SHOW BLACK SCREEN SIMILAR TO BOOTLOOP DON'T PANIC WAIT FOR START OS
DON'T DISCONNECT OR REMOVE BATTERY
OPTIMIZING :
FIND ANIMATION SCALE IN DEVELOPER OPTIONS AND TURN OFF IT
GO TO THEMES AND ACTIVATE PIXEL THEME (FROM PIXEL OS EXTRACTED)(RC 8.2 AND LATER SUPPORTED)
USE CLEAN MASTER TO CLOSE APPS
DOWNLOAD MY UPDATES AND REPORT ABOUT PROBLEMS FOR CREATE BETTER FOR ALL OS
RC 8.2
WORKING ALL , NO BUGS IN ROM , STABLE AND RC 8.2 IS READY TO USE
IF YOU WANT TO UPDATE YOUR PHONE (ONLY IN MY ROM) , WIPE SYSTEM
IF YOU ARE NEW LOOK UP HOW TO FLASH YOUR PHONE AND INSTALL MY OS
IF YOU ARE READY DOWNLOAD MY ROM , NEW USERS MUST UNLOCK BOOTLOADER , INSTALL BOOT IMG AND RECOVERY , AND FLASH WIPE DATA , CACHE , DALVIK , SYSTEM TO RESTORE MY OS
ACTUAL USERS IF INSTALL MY ROM/UPDATE EARLIER MUST WIPE ONLY SYSTEM AND DALVIK FOR UPDATE AND GOOD WORK ROM
ALL USERS IN LAST STEP AFTER START ANDROID MUST ACCEPT PERMISSIONS FOR DIALER AND LAUNCHER
IMPORTANT INFORMATION FOR USERS:
MY ROM HAVE NFC INSIDE , BUT IN DEFAULT NFC IS OFF BECAUSE I DON'T SUPPORT NFC PROBLEMS IN THIS OS
NFC ''LIKE'' YOUR BATTERY AND IS SWITCHED OFF , BUT ICON OF NFC NO ACTIVE
DON'T INSTALL OTA AND OTHER STOCK ANDROID .
I SHARE UPDATE FILE FOR THIS XPERIA
AOSP RC 8.4
NEW UPDATES
FILE MANAGER
MUSIC PLAYER
PHOTO GALLERY
CAMERA
DIALER
SMS MESSAGES
QUICK CHARGE
QUICK BOOT (DELETED AND SKIPED ON START BOOT ANIMATION)
SMALLER SYSTEM (984MB)
LONGER BATTERY LIVE
ONLY 16 APPS IN MENU !! :
PROBLEM WITH STOPPED PLAY STORE
RC 8.5
QUICK CHARGE
QUICK BOOT (DELETED AND SKIPED ON START BOOT ANIMATION)
SMALLER SYSTEM
LONGER BATTERY LIVE
VOLTE
OPTIMIZATION - LOOK UP AND USE FOR BETTER PERFORMANCE AND LOWER USAGE CPU AND GPU
IMPORTANT!!
MAKE COPY COPY IMPORTANT FILES
FOR RC 8.4 WIPE SYSTEM , DATA , CACHE ,DALVIK AFTER WIPE RESTORE NEW FILES
WIPE IS REQUIRED FOR UPDATES : EARLIER>8.4 AND NEWER , IF SYSTEM IS 8.1 AND 8.2 YOU DON'T NEED WIPE BECAUSE THIS IS REGULAR UPDATE !! , IF IS 8.2 OR NEWER AND HERE YOU CAN'T FIND 8.3 YOU MUST MAKE A WIPE (8.2 IS NOT REGULAR UPDATE TO 8.4 WIPE , 8.1 , 8.2 IS REGULAR UPDATE VER TO VER , NOT REGULAR NEW OS 8.4 IS UPDATED ALL) (OLDER>8.4 NEED WIPE)
VOLTE SUPPORT WAS ADDED TO NEXT VERSION OF ANDROID (LOOK SCREENSHOT) , I PUBLISH SOON VOLTE VERSION , BUT VOLTE WAS NOT TESTED . (TEMPONARY I DON'T HAVE LTE IN MY CITY)
DOWNLOAD RC 8.1
https://drive.google.com/file/d/0B0j-ruvmukWhbXZpaDFNOVF6SUE/view?usp=sharing
DOWNLOAD RC 8.2
https://drive.google.com/file/d/0B0j-ruvmukWhZFNIczlYMDdvX0U/view?usp=sharing
DOWNLOAD AOSP RC 8.4
https://drive.google.com/file/d/0B0j-ruvmukWhY21fU0hvOEdrR0U/view?usp=sharing
FINAL STABLEDOWNLOAD RC 8.5
https://drive.google.com/file/d/0B0j-ruvmukWhZkJXLXNJTzZyZnM/view?usp=sharing
NEW CLEAN OS BASED ON 37.0.A.2.248 BE SOON !!
ANDROID 6.0.X - CLEAN OS 7
CLEAN OS 7- ANDROID 6.0.X
ADDONS :
-VOLTE
-XPOSED
-QUICK BOOT
-DELETED AND UPDATED SOME APPS
-MORE STABLE , BUT THIS IS ONLY BETA !!
DOWNLOAD RC 1.0
DOWNLOAD
If you have problem with start xposed , please go here and install XposedInstaller_3.1.4.apk and update xposed .
Xposed work perfect on E5 .
If you want to update your phone to RC 1.0 , try to use new better recovery
DOWNLOAD RECOVERY
In this recovery some bugs was repaired !!
Special thread for CLEAN OS 7 is here
ANDROID PROJECTS FOR E5 WITH ANDROID 7.X.X , 8.X.X NOW WAS DELETED PERMANENT . (I HAVE TOO MORE PROBLEMS WITH GRAPHICS AND CPU) !!!!
Here you can find last version of 7.1.1 , but after update driver cpu and gpu this rom dont working and dont boot . He bootloop your phone , if you are normal user dont install my port 7.1.1 because this can hard brick your phone . If you are a programmer you can download 7.1.1 and repair it .
IF I HELP YOU PRESS THANKS
I welcome to like my page on facebook
Wow... Excellent job!!
RC 8.2
-new dialer
-new phonebook
-kernel update
re-set apps
You can update apps via store play
Possibly to update launcher via play store
possibly I make only one os with pixel apps (only for test) , but you (users) check what do you want from this project .
Now I work with first alpha of 7.1.1 , and in future I publish nougat for this device .
dear users
any updates is manual , no update via app !!
if you want to use stable android download last version
thanks you for shared your work !!!
So, I can install 8.4 without uptades for example v8 o v6?
I have one problem
Othinus said:
I have one problem
Click to expand...
Click to collapse
What is your model ????
do you wipe all , or only system ????
DO YOU ACTIVATE OPTIMIZATIONS FROM POST , AND DO YOU ACCEPT PERMISSIONS FOR GOOD WORKING OS ????
Othinus said:
So, I can install 8.4 without uptades for example v8 o v6?
Click to expand...
Click to collapse
Yes , but after wipe .
v8 have few problems , but v6 if you install have problem with file explorer and this is not keyboard version .
resolve for problem with 8.4 : download older 8.2 wipe system , restore 8.2 system
resolve for problem with 8.4 : download older 8.2 wipe system , restore 8.2 system
MAREK10747 said:
What is your model ????
do you wipe all , or only system ????
Click to expand...
Click to collapse
F3311 and yes, i wipe data, system, dalvik caché, cache and restore
OK , now system be work correct . Write me here about working your actual android after restore . I test this OS (8.4) , and I find this bug , after update , but now I create patch for this OS and patch for kernel . In this moment I re-pack kernel after add patch for play store , now I back to continuation HALF-STOCK OS (read CLEAN OS) .
MAREK10747 said:
OK , now system be work correct . Write me here about working your actual android after restore . I test this OS (8.4) , and I find this bug , after update , but now I create patch for this OS and patch for kernel . In this moment I re-pack kernel after add patch for play store , now I back to continuation HALF-STOCK OS (read CLEAN OS) .
Click to expand...
Click to collapse
Okay, so what should I download and what wipes?
I actually in stock
Othinus said:
Okay, so what should I download and what wipes?
I actually in stock
Click to expand...
Click to collapse
Soo , if you have stock rom wipe system , data , cache , dalvik and internal memory .
If you have my CLEAN OS , for update you wipe only system , after wipe you restore new image in recovery .
Now I add volte to rom , but volte is not tested !!
All working , but I now testing rom and apps .
System back from AOSP apps to stock , and now all is ok .
Update google play broke play store and play store stop , now in kernel and in OS I add patch and any apps can't crash , update 8.5 is stable , and final . In future I planing add some addons from nougat , and to do copy of nougat in marshmallow I'm know after all this is always marshmallow , but I prefer finish stabilizing 7.x.x to E5 and publish it as AOSP nougat actual marshmallow must be similar to next android because users must have change ... marshmallow or original nougat (the same apps and features , but other os) . Now 7.x.x is unstable and I can't publish this os here .
MAREK10747 said:
Soo , if you have stock rom wipe system , data , cache , dalvik and internal memory .
If you have my CLEAN OS , for update you wipe only system , after wipe you restore new image in recovery .
Now I add volte to rom , but volte is not tested !!
All working , but I now testing rom and apps .
System back from AOSP apps to stock , and now all is ok .
Update google play broke play store and play store stop , now in kernel and in OS I add patch and any apps can't crash , update 8.5 is stable , and final . In future I planing add some addons from nougat , and to do copy of nougat in marshmallow I'm know after all this is always marshmallow , but I prefer finish stabilizing 7.x.x to E5 and publish it as AOSP nougat actual marshmallow must be similar to next android because users must have change ... marshmallow or original nougat (the same apps and features , but other os) . Now 7.x.x is unstable and I can't publish this os here .
Click to expand...
Click to collapse
Ok ok thx for the help.
I'm test try rc8.5 today and later I'll tell you if there were errors or it was perfect.
I have dude, i can test your port of 7.x.x?
Because when I press storage it stops?
Othinus said:
Because when I press storage it stops?
Click to expand...
Click to collapse
storage it stop because , I delete app from this . Why ???? Because This process spy android users , and always active ,,like a battery,, , and is delete for longer live battery . If user use my tweaks in central post for optimization android , battery will be live longer little .
7.1.1 is in alpha status very unstable , I cant publish system with 7.1.1 .
Now I prefer make deodex actual marshmallow .
Awesome work man! If you could just change the launcher,something stock.Keep up the good work!
If you are from Poland , Czech Republic or Slovak Republic write here in your own language I speak Polish , English , little Czech and Slovak
I created a script that'll ease Custom ROM installation on A/B devices. The script is generic and will work w/ any rom, device.
General flash instructions:
-Flash your devices' Stock ROM (for firmware)
-Flash your Custom ROM of choice
-Flash Finalize.zip
-Boot to System
Download finalize script from here
#######################################
For the intellectuals: This script clears the dalvik-cache and copies the firmware to both slots.
Hope this saved you guys some headache while flashing ROMs.
THREAD CLOSED
As per the request of the OP, this thread has been closed.
Please refer to this thread for continuous support in regards to this project.
Thx,
mrjuniork (Forum Moderator)
S908B & S908E system-rw Dr.Ketan ROM
Supported device : S918B & S908E/N for Full ROM, All rootable variants for Magisk Module
We do support usually 2-3 years since device launched, but yet no guarantee, We may drop support for any device / any variant/s anytime without any prior notice.
ROM Features
ROM Features varies with version of ROM. For more details, read changelog post. Link available in post #3 for changelog of all versions.
Must read changelog for a version you are going to install, it will have latest information about features, changes, known bug list/fix and Installation guide of respective version.
There are two types of ROM available since OneUI 5.0
1.Full system-rw ROM : Full ROM includes super.img with system-rw capabilities + stock enforcing kernel + ROM Control & Modification
Supported device : S908B & S908E
2.Magisk ROM Module and here explained in details how it is different from full ROM
Supported device : All S22 variants
Credit and Thanks :
@Chainfire - Respected elite developer for supersu and his unbelievable contribution to XDA/Android community. @wanam - Respected elite developer for his awesome contribution and references to his works.
@topjohnwu for Magisk
@xperiacle the amazing developer for reference to his work and tools. @amarullz for aroma installer. @gharrington for 3minit battery and QuickLaunch.
ROM Control source and all credit and thanks goes to @daxgirl and @Wuby986 for their open source project for RomControl.
@AbrahamGC for some ideas samsungvn htcmania & 4PDA for tips and some stock apks.
AbrahamGC and Anan1211 for Secure folder and s-health A12 ianmacd for TWRP @afaneh92 for TWRP, system/vendor rw scripts and modules. @Arteush for bluetooth fix (losing BT pair on reboot) on Android Q, aka_vkl for Dolby digital, kdrag0n for SafetyNet fix @Winb33 for custom font pack. HuskyDG for Bootloop Protector magisk module. MrWeahere for CRB Kitchen
XDA devDB InformationS908 I Dr.Ketan ROM , ROM for the Samsung Galaxy S22 Ultra
Contributors
Dr.Ketan
ROM OS Version: Android 12
ROM Kernel: Stock (pre-rooted). Source code (samsung) here
ROM Firmware Required: Stock Samsung specified version
Version Information
Status: Stable
Created 2022-03-12
Installation, Important Infos & Download
Installation : State of the art Installation procedure.
Detailed installation guide separately available in download area along with ROM files for Full ROM and for magisk module read changelog post.
WARNING
Before you root your device you must be aware that
This will void warranty.
As of now you will lose Samsung Pay and Samsung Pass forever if you root once, even unrooting won't help.
There are many features stop working when you unlock bootloader other than S pay/Pass like Samsung Health, Secure Folder, Galaxy Watch pairing issue, Issue connecting old gear watch (S3 or earlier), Google Pay etc but ROM is patched for all these mentioned features. Still you may trouble using some bank apps and these may fixed by adding these apps to Magisk Hide
There may be some knox features there which you may not able to use but I can't list those as I never used. Just Google It
Patched featurs are working today when writing this, No idea if it may stop working next moment/tomorrow or later
Also to note, once you root, you can't go back to "pre-rooted" state completely. It is one way!
OTA won't work once you root device.
ROOT with caution.
You can unroot & Relock bootloader after flashing stock firmware, but still your warranty flag remain 0x1 and most of countries it still voids warranty. Also after unrooting & relocking bootloader, some knox features never work again.
ROM Tool permission : Files & media - To save and read files, Calendar - Tool needs some time monitoring to avoid using RT immediately after reboot. Special access for accessibility service - Since Android 12 it requires for QS panel custom Toggl e.g. Reboot to recovery
Download : https://drketanrom.com/
ChangeLog for Magisk Module ROM
OneUI 4.0
Spoiler: ChangeLog OneUI 4.1
ChangeLog OneUI 4.1
- S01 - 12.03.2022
- S02 - 14.03.2022
- S03 - 19.03.2022 & S03.1 - 30.03.2022
- S04 - 06.04.2022
- S05 - 27.04.2022
- S06 - 27.05.2022
- S07 - 05.06.2022
- S08 - 18.06.2022
- S09 - 08.07.2022
- S10 - 05.08.2022
- S11 - 15.10.2022
OneUI 5.0
- T01 - 26.10.2022
- T02 - 19.11.2022
- T03 - 14.12.2022
- T04 - 15.01.2023
OneUI 5.1
- T05 - 17.02.2023
- T06 - 11.03.2023
- T07 - 14.04.2023
- T08 - 15.05.2023
- T09 - 20.06.2023
ChangeLog for Full System-RW ROM
OneUI 5.0
- T01 - 07.11.2022
- T02 - 20.11.2022
- T03 - 14.12.2022
- T04 - 17.01.2023
OneUI 5.1
- T05 - 17.02.2023
- T06 - 11.03.2023
- T07 - 11.04.2023
- T08 - 12.05.2023
- T09 - 21.06.2023
How to Root (currently non rooted device) with or without TWRP
Spoiler: Root existing non rooted device
Root with or Without TWRP
1.Root without TWRP :
Unlock Bootloader
You needs to download stock firmware (You can get stock firmware with Frija) and extract AP*.tar.md5 file and patch with magisk. Flash patched file with AP tab of Odin PS : In case root files without TWRP available in download area for your variant, you can use that for AP slot instead of Patching AP
put device in download mode and connect to PC and flash above files
Reboot to recovery and select to format data
Reboot to system → You will see Magisk stub in drawer → Update it. (In case stub not there, Donload magisk app from Download area and intall manually) → Open Magisk - It will ask to complete additionl setup, Let it do. → Reboot device. You are now ready to Intall Dr.Ketan ROM module. Move to next step.
2.Root with TWRP
Unlock Bootloader
Download TWRP, Patched vbmeta and Kernel and system-rw script zip from TWRP thread (Link below)
Select TWRP tar file with AP slot and Patched vbmeta for USERDATA slot of Odin PS : In case root files with TWRP available in download area for your variant, you can use that for AP slot. It contains both TWRP+patched vbmeta
Put device in download mode and connect to PC and flash above files
When Flashing completes, disconnect device and starightway reboot to TWRP
Run multidisabler from TWRP → Advanced → Terminal → and type : multidisabler (it may take few minutes, keep patience)
Wipe Data (Full wipe, that you needs to type YES to continue)
Reboot TWRP and now connect to PC and copy Custom kernel and flash from TWRP as zip
get Latest magisk apk and flash from TWRP
If you want to make system-rw, Get afaneh92_lp_rw_tool_v*.zip from TWRP thread and flash
Reboot device to system Update Magisk from stub if availble OR Install Magisk apk
Now ready to install Dr.Ketan Module, Follow XDA ROM Changelog post to install ROM Module
Thanks & Credit to Afaneh92 for TWRP & Kernel, below are link for OP Exynos and SnapDragon
PS : For detailed instructions about Magisk installation (root) read here. In case still you have question, move to Question forum of S22 section and ask for help. This thread is development thread and any questions related to how to root will be ignored.
How to Update Firmware and Keep root/twrp intact without losing data
PS : We highly recommend to make data backup before trying this as something went wrong and you may lose data.
Spoiler: Update Firmwre with Keeping Root/TWRP/data intact
Read below methods depending on you have root with or without TWRP
1.Rooted S908B/E/N/0 without TWRP
Unlock bootloader
You needs to download stock firmware you want to update (You can get stock firmware with Frija) and extract AP*.tar.md5 file and patch with magisk. Select Patched AP file for AP slot and BL*.tar.md5,CP_tar.md5,Home_CSC*tar.md5 for BL,CP and CSC slot accordingly. (PS : In case root files without TWRP available in download area for your variant, you can use that for AP slot instead of Patching AP, Importnt : Use Home_CSC*tar.md5 if you want to keep data. Selecting CSC*.tar.md5 will Wipe data autometiclly.)
Reboot device → You are now ready to Intall Dr.Ketan ROM module. Move to next step.
2.Rooted S908B/E/N/0 with TWRP
Download latest firmware as per pre-requisite
Disable Auto Reboot option in Odin
Select appropriate slot in Odin for BL,AP,CP and CSC (Using HOME_CSC will keep data, while using CSC* will format data) from stock firmware
Select TWRP file for USEDATA slot . File must include patched vbmeta file. If TWRP doesn't have patched vbmeta included, you have to make one yourself. To make TWRP+Patched vbmeta : Download both the files from TWRP thread and extract it to get recovery.img and vbmet.img. On your PC, select these two .img files and Rt click → select 7zip → Add to archieve → select archieve format "tar" → Select OK and this will create a tar file that have TWRP+Patched vbmeta. Use newly created tar file for Userdat slot of Odin. PS : Incase download area have Rootfiles with TWRP for your device then it contains everything TWRP+patched vbmeta + Kernel, extract zip to get all required files
When Flashing completes, disconnect device and starightway reboot to TWRP. Importnt : At this stage you should be quick to reboot to TWRP, If you flais and device tries to boot to system, you may have to wipe data.
Run multidisabler from TWRP → Advanced → Terminal → and type : multidisabler (it may take few minutes, keep patience)
Wipe Data (If you are already using Afaneh92's TWRP and used multidisabler + Format data, you can select to Factory Reset too (This will preserve media file) OR you can skip wipe option at all in case you want dirty Install.)
Reboot to TWRP In case you have wiped data.
Copy Kernel & Magisk apk/zip to device (Alternatively use USB storage)
Install kernel (Flash Kernel zip from TWRP)
Flash Magisk
If you want to make system-rw, Get afaneh92_lp_rw_tool_v*.zip from TWRP thread and flash
If you don't have magisk app in drawer (in case of clean install), Install manually.
Open Magisk app and complete setup if it asked for
PS : If you are on any other TWRP or Stock recovery, you must FORMAT DATA (That requires to type 'Yes' to confrm wipe)
Now ready to install Dr.Ketan Module, Follow XDA ROM Changelog post to install ROM Module
Thanks & Credit to Afaneh92 for TWRP & Kernel, below are link for OP Exynos and SnapDragon
PS : For detailed instructions about Magisk installation (root) read here. In case still you have question, move to Question forum of S22 section and ask for help. This thread is development thread and any questions related to how to root will be ignored.
Help & Support
We do support only ROM related queries here over XDA thread only, we do not have/encourage any private support over telegram or other media to support ROM related queries.
We do not answer any ROM related question over private chat.
If your queries doesn't have enough information, it will be ignored.
We recommend everyone to read OP,Changelog and Installation guide before you install ROM. If answer to your queries already there in OP, Changelog post or in Installation guide, it will be ignored
Any queries not reated to XDA ROM (e.g. TweaksPro) then you must seek help from developer over mail/privately. Here we discuss only XDA ROM related issue.
For reporting issue/bugs you must provide enough info as said below under "How to report bug/issue"
How to report bugs/Issue?
To report issue, you needs to provide following informations, else it will be ignored. Also if your query is already mentioned on OP/ChangeLogg post, it will be ignored.
1.ROM build number.
2.Dirty/Clean Install. - If you have dirty installed, Then first clean install and report if issue persists.
3.Bug/Issue appears right after installing or later?
4.How to reproduce error.
5.Is there any same reports there on thread on your searching?
6.Is there any mention about same bug on OP or changeLog post?
7.Logs - Attach logs here/Upload to other places where it can be downloaded without registration and doesn't have ad (we recommend dropbox/Gdrive) and post link.
Click to expand...
Click to collapse
Finally! After all the teasers and trailers ... We are getting into serious business !
THANK YOU
All the best and cheers Dr. !
ChangeLog S01
Based on S908EXXU1AVBF Android12 March 2022 security patch OneUI 4.1
ROM Tool on essential fix auto setup zygisk including SafetyNet fix (no needs to change any option manually)
Important Instructions for setting up ROM (NEW)
Prerequisite :
Must have installed firmware S908EXXU1AVBF S22 Ultra
Rooted device with Magisk (Zygisk) Intallled (Follow steps belo in case you have non rooted device)
How to Root device
Unlock bootloader
Download Root_files*.zip (available in download area) - Extract and Flash Root_Files_*.tar.md5 with Odin for AP tab
Reboot to recovery and select to format data (Factory reset option on stock recovery)
Reboot device → You will see Magisk stub in drawer → Update it. (In case stuf not there, Donload magisk app from Donload area and intall manually) → Open Magisk - It will ask to complete additionl setup, Let it do. → Reboot device. You are now ready to Intall Dr.Ketan ROM module. Move to next step.
How to Install Dr.Ketn ROM Module
Download DrKetan_ROM_S*_module.zip and copy to device, We recommend to check MD5 to rule out faulty download
Uninstall any other magisk module you have installed
Open Magisk app → Click on Module → Select Install from storage → Select Module file you have copied to device → Complete Intallation and reboot device
Setting up device first time after Module installation
Open ROM Tool, Apply essential fix and Reboot,
After reboot you can check SafetyNet and should be passed. You can use this app from playstore or This from Github to check SafetyNet
Now you can further setup ROM a per your liking. Also MagikHide is Configure Denylist now and available under Magisk Settings.
Since A12 Stable Magisk not working and new Magisk doesn't have buil-in Module repo, You can get standalone module manager from here For more details and queries about new magisk ref this
PS : Plz don't install any other mods for SafetyNet, All queries related to Magisk/SafetyNet will be ignored if already explained above
TweaksPro version requires 4.1.0 or up
ROM Features (XDA Version)
- Ad Free QS Panel Toggle
- Reboot to recovery QS Panel Toggle
- Native call recorder (Manual) While you are on call - click 3 dot - Record (Should work without CSC restriction)
- Auto Call recorder without CSC restriction (ROM Tool - Mods & Fix)
- High Volume warning disabled
- Pre fixed Titanium freezing while restoring apps
- Probable fix for Titanium Backup schedule
- Internet browser Secret mode
- S Health patch for using with rooted device.
- ROM Tool with following Options
AdFree mode Enable/Disable
Single click install/uninstall custom fonts (on the fly)
YouTube Vanced Installer (No xposed requires)
NonRoot - Requires MicroG to login
Root - Truely alternate to Youtube, Can login to youtube without MicroG (disable Play store update)
You have to click on NonRoot/Root depending on your choice, then you needs to click "Install" tab and latest version of Youtube vanced will get installed.
StatusBar Icons
Show/Hide stock battery
Show/Hide 3minit battery
show/hide stock clock
show/hide 3minit clock
ROM Control - See below
Mods & Fix
Auto Call Record
Titanium backup FC fix
Google Pay Fix
Added camera fix (Certain users reported camera failed issue. This is reported on stock too, here is someworkaroung meanwhile samsung fix it)
SafetyNet Fix
Samsung Health & Private share fix
Update & Fix
- ROM Control (systemUI preferences)
Battery Bar with thickness and color option
Virtual key on statusbar (Lt/Cinter/Rt)
Network meter with Toggle (Lt/Rt/Quick Panel/None) with color option
PS : There may be few more options in ROM control but won't work if those are not mentioned here.
Known Bug/Tips/Fix
3 minit users can use 3minit battery paid version for free. Check this (Thanks to gharrington )
Tips on TWRP and App Backup/Restore Read Here
Download : DrKetanROM.com
PS : This is a fully customized ROM and for end users only, ROM or any part of ROM not allowed to redistribute,modify or to use as base to prepare new ROM.
STATUS : Online
Haleluja, its here!! Great amazing work! OMG I'm so excited! Let's go!!
Thanks alot !!! Finally I can unpack my S22 Ultra ^^ and use it as real Phone
Proud to be the first worldwide to have a Custom ROM, FULL ROOT, Adblock etc on a S22 Ultra Exynos
Community LOVE for you!! ♥♥♥♥♥
EDIT: HERE IS THE GUIDE TO USE FOR EXYNOS (still testing)
Ok, so basically find and download the firmware (S908BXXU1AVC6 for EU - or ask me for the File..) to the phone eather with the Phone itself or trought USB-Cable, install magisk.apk from here, unpack the zip file from Firmware and patch the ap file via magisk, get the files to the pc and use odin to flash the patched Firmware.
of course unlock bootloader before and go to download mode.
Here is how to do that:
Guide to root Galaxy S22 Ultra (B/E/N/0), unlock bootloader and flash official firmware (noob friendly)
Your warranty is now void. If you root your device, Your KNOX status will be tripped. You can still pass the safety net after you root if you follow the instructions. Sorry for USA models, you can't root unless you can unlock your bootloader You...
forum.xda-developers.com
or
https://www.droidwin.com/how-to-unlock-bootloader-on-samsung-galaxy-s22-s22-plus-s22-ultra/
Then follow the other steps from Dr. Ketan
S01 Dr.Ketan Magisk ROM is Online now
Must read changelog above for Installation guide and other Info
Thank you for Support & Trust on this ROM.
no rom, only module
Yaiks. Hopefully it will be available for B variant
iampatricktan said:
Yaiks. Hopefully it will be available for B variant
Click to expand...
Click to collapse
You can try on exynos (only module, no root files). If it doesn't work then maximum you needs is to factory reset.
In that case I may consider to make separate rom
dr.ketan said:
You can try on exynos (only module, no root files). If it doesn't work then maximum you needs is to factory reset.
In that case I may consider to make separate rom
Click to expand...
Click to collapse
I think its much better to make separate only for Exnos variant? So that files for SD will not be included, correct me if I'm wrong about that. Also been using your ROM since my Note 9.
dr.ketan said:
S01 Dr.Ketan Magisk ROM is Online now
Must read changelog above for Installation guide and other Info
Thank you for Support & Trust on this ROM.
.
Click to expand...
Click to collapse
Huge thx my bro
ok, so great news, it works at least for exynos as well!
Safetynet also works!
Problems so far:
Can't change my keyboard - UI restarts
com.android.phone closes down
and it says system is unstable - please do a factory restore - on boot up.
But all in all it seems to work, with root etc.
Thx Dr My bro. Hopefully we can have the Exynos version seperatly if possible and not too much of your time consuming.
beautyangel said:
Thx Dr My bro. Hopefully we can have the Exynos version seperatly if possible and not too much of your time consuming.
Click to expand...
Click to collapse
||||| said:
ok, so great news, it works at least for exynos as well!
Safetynet also works!
Problems so far:
Can't change my keyboard - UI restarts
com.android.phone closes down
and it says system is unstable - please do a factory restore - on boot up.
But all in all it seems to work, with root etc.
Click to expand...
Click to collapse
Will do it later today
Any of you free just inbox me
For S908B EXYNOS Users
I have added Bootlogo error text removal file in Download area. Instructions packed inside.
PS : DON'T USE ON SNAPDRAGON device
.
A thousand thank yous @dr.ketan and to @||||| for your Exynos work
Just need delivery of my S22 from Sammy now
dr.ketan said:
For S908B EXYNOS Users
I have added Bootlogo error text removal file in Download area. Instructions packed inside.
PS : DON'T USE ON SNAPDRAGON device
Huge Huge thx Dr my Bro and @||||| for all Awesome job.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LITE OS = Stock ROM - Bloatware + Optimization
As we have seen Realme Provides a good OS with some nice to have features and some extra things that are locked down and not available in Custom ROMs such as Floating Apps , Integrated App Lock , Dual System Profile , Various AOD themes nad better Battery Management to list a few.
But it has some serious flaws too like
1) Useless Apps like HOt Apps , heytap apps that cant be removed
2) Outdated drivers for GPU
3) Trackers in inbuilt apps and system
This LITE OS aims to fix all these issues and also add some nifty features that wont have any side effect on Stability of OS.
These features are
1) More Privacy
2) Faster Boot Time
3) Lower Idle System Resource Usage
4) 140+ unnecessary apps removed
5) Higher Read / Write speed than stock
6) Better Performance in Games and Heavy Task
7) Trackers and Loggers disabled or removed
8) Reduced excessive permissions for Google Apps
9) Updated GPU drivers to maximum supported version of v530
10) Removed some gimmicky features that only reduce performance of Device
The LITE OS is made from the most recent and stable OTA from INdian variant of Realme GT NEO 2 ,Other egion usrs can also install and try this ROM but there might be some possibility that some bugs may appear in future . Indian Variant is used because Chinese version has too many Chinese tracking apps , European Vertsion does not have Call recording feature , and Russian vartiant gets fewer updates . You can try either
Android 11 based LITE OS RUI2
Android 12 based LITE OS RUI3
Android 13 based LITE OS RUI4
WARNING
If you are proceeding and installing this software , you yourself would be only responsible for anu loss of data or destruction of device or its capabilities happen ,
Neither me , nor XDA will be responsible for your actions which you took yourself .
ABOUT
This LITE OS has been in existence for nearly a year but after many people told me to publish it on XDA , I am releasing the latest version in May 2023 .
Prior to this 6 versions have been released on sourceforge along with Telegram , some older versions were lost as they were uploaded on Mega .
Requirements :-
You need unlocked bootloader device
Any custom recovery installed .
Free space of About 10 GB in device or Pen Drive
Ability to restore device , if it gets bricked beacuse of your own noviceness
Instructions :-
Download the zip from download section and match checksum
Backup all apps , media and other data to pc or Pen-drive
Extract the Zip and copy paste files to Device main Storage
Boot into Custom Recovery flash the SuperPartition.img into super partition .
And then flash the RUI_LITE_OS-firmware.zip , if the process completes successfully then only proceed to next step .
Now comes an important step where you have to be careful
#) If You were previously on Stock ROM or custom ROM ....>> You need to wipe Dalvik , Cache , Data & Internal Storage i.e clean-flashing
OR
#) If You were on LITE OS before , you need to wipe Dalvik and Cache only i.e, dirty-flashing
After wiping is done , reboot the phone to system and wait for it to boot , If you have followed the process correctly a yellow realme logo will show and within 5 minutes you will be greeted with a setup screen ,Complete the Setup and Enjoy a de-bloated and optimized device .
What to do after first boot ? (Suggested yet Optional)
Restore your data , either by Google or by Swift Backup / Migrate .
Reinstall the Realme UI Dialer App apk from extra folder and make it default app for calling and give all permissions .
After that root with Magisk delta if you want to use root and other modules
Let the device settle down for 2-3 hours , before saying it is lagging
What to Never Do ?
Switch off PHone or do this with process with less than 30% charge while flashing Firmware
Unroot from Magisk via unistaller zip or Magisk app (If you want to unroot just flash firmware package again )
To disturb the device while it is doing first boot
NOt backing-up data to external devices like PC or otg-pendrive
Installing Modules meant for AOSP or Custom ROMs
DOWNLOADS
Click here to Download -> [RUI4_LITE_OS_F05] | (Size-4GB) | Update date 09/05/2023
Kindly Dont Mirror the ROM
Credits -
Satham for TWRP
Peter for suggesting optimizations
TheMalachite for making device trees
Andreock for Custom Dragon Kernel for LITE OS
Mr Delta and gang for support
Previous Versions of LITE OS
RUI4 based on Android 13
LITE OS F03
LITE OS F02
LITE OS F01
RUI3 based on Android 12
LITE OS C10
LITE OS C08
RUI2 based on Android 11
LITE OS A09
Tips
1)Kindly Use safetynet-fix by displax to fix safetynet integrity check failing
RMX3370 said:
View attachment 5907269
LITE OS = Stock ROM - Bloatware + Optimization
As we have seen Realme Provides a good OS with some nice to have features and some extra things that are locked down and not available in Custom ROMs such as Floating Apps , Integrated App Lock , Dual System Profile , Various AOD themes nad better Battery Management to list a few.
But it has some serious flaws too like
1) Useless Apps like HOt Apps , heytap apps that cant be removed
2) Outdated drivers for GPU
3) Trackers in inbuilt apps and system
This LITE OS aims to fix all these issues and also add some nifty features that wont have any side effect on Stability of OS.
These features are
1) More Privacy
2) Faster Boot Time
3) Lower Idle System Resource Usage
4) 140+ unnecessary apps removed
5) Higher Read / Write speed than stock
6) Better Performance in Games and Heavy Task
7) Trackers and Loggers disabled or removed
8) Reduced excessive permissions for Google Apps
9) Updated GPU drivers to maximum supported version of v530
10) Removed some gimmicky features that only reduce performance of Device
The LITE OS is made from the most recent and stable OTA from INdian variant of Realme GT NEO 2 ,Other egion usrs can also install and try this ROM but there might be some possibility that some bugs may appear in future . Indian Variant is used because Chinese version has too many Chinese tracking apps , European Vertsion does not have Call recording feature , and Russian vartiant gets fewer updates . You can try either
Android 11 based LITE OS RUI2
Android 12 based LITE OS RUI3
Android 13 based LITE OS RUI4
WARNING
If you are proceeding and installing this software , you yourself would be only responsible for anu loss of data or destruction of device or its capabilities happen ,
Neither me , nor XDA will be responsible for your actions which you took yourself .
ABOUT
This LITE OS has been in existence for nearly a year but after many people told me to publish it on XDA , I am releasing the latest version in May 2023 .
Prior to this 6 versions have been released on sourceforge along with Telegram , some older versions were lost as they were uploaded on Mega .
Requirements :-
You need unlocked bootloader device
Any custom recovery installed .
Free space of About 10 GB in device or Pen Drive
Ability to restore device , if it gets bricked beacuse of your own noviceness
Instructions :-
Download the zip from download section and match checksum
Backup all apps , media and other data to pc or Pen-drive
Extract the Zip and copy paste files to Device main Storage
Boot into Custom Recovery flash the SuperPartition.img into super partition .
And then flash the RUI_LITE_OS-firmware.zip , if the process completes successfully then only proceed to next step .
Now comes an important step where you have to be careful
#) If You were previously on Stock ROM or custom ROM ....>> You need to wipe Dalvik , Cache , Data & Internal Storage i.e clean-flashing
OR
#) If You were on LITE OS before , you need to wipe Dalvik and Cache only i.e, dirty-flashing
After wiping is done , reboot the phone to system and wait for it to boot , If you have followed the process correctly a yellow realme logo will show and within 5 minutes you will be greeted with a setup screen ,Complete the Setup and Enjoy a de-bloated and optimized device .
What to do after first boot ? (Suggested yet Optional)
Restore your data , either by Google or by Swift Backup / Migrate .
Reinstall the Realme UI Dialer App apk from extra folder and make it default app for calling and give all permissions .
After that root with Magisk delta if you want to use root and other modules
Let the device settle down for 2-3 hours , before saying it is lagging
What to Never Do ?
Switch off PHone or do this with process with less than 30% charge while flashing Firmware
Unroot from Magisk via unistaller zip or Magisk app (If you want to unroot just flash firmware package again )
To disturb the device while it is doing first boot
NOt backing-up data to external devices like PC or otg-pendrive
Installing Modules meant for AOSP or Custom ROMs
DOWNLOADS
Click here to Download -> [RUI4_LITE_OS_F05] | (Size-4GB) | Update date 09/05/2023
Kindly Dont Mirror the ROM
Credits -
Satham for TWRP
Peter for suggesting optimizations
TheMalachite for making device trees
Andreock for Custom Dragon Kernel for LITE OS
Mr Delta and gang for support
Click to expand...
Click to collapse
Thanks for the efforts. Last time I've tried LITE OS I couldn't setup 4-digit PIN, only 6-digits, it was throwing me out of the settings, probably because some excessive debloat. Could you kindly tell if that doesn't happen now? Thanks again
Thank you for sharing it here. I tried f03, and I had trouble with sending sms and doing calls. Hopefully, this is fixed in this version...
Any important differences between European and Indian versions apart from the European not having the call recorder?
Edit: For some reason, on the Play Store, it says Rocket League Sideswipe is not compatible with my device, won't even let me download it... Although I downloaded it from APKPure and it seems to work fine.
rtkpX said:
Any important differences between European and Indian versions apart from the European not having the call recorder?
Edit: For some reason, on the Play Store, it says Rocket League Sideswipe is not compatible with my device, won't even let me download it... Although I downloaded it from APKPure and it seems to work fine.
Click to expand...
Click to collapse
No major difference between EU or Indian variant , Indian variant preferred for call recording feature
Does the Android 13 version support Gpu drivers V707?
I've tried all the versions. All the versions, you can't do calls or send sms in China...
george343456 said:
Does the Android 13 version support Gpu drivers V707?
Click to expand...
Click to collapse
No support for any driver above v530 as it will cause camera failure and random crashes and lags
Shiw Liang said:
I've tried all the versions. All the versions, you can't do calls or send sms in China...
Click to expand...
Click to collapse
I think it is because ORoaming is removed , it is required app for Chinese SIM to function but not for Global SIMs and since it tracks and keeps record of calls being made it was removed from LITE OS , and because of this ,Lite OS may not be compatible with Chinese Telecom Operators
RMX3370 said:
No support for any driver above v530 as it will cause camera failure and random crashes and lags
Click to expand...
Click to collapse
Now V690 for openGL And Vulkan camera work!
Where i can find SuperPartition.img?
Rxfireblade said:
Where i can find SuperPartition.img?
Click to expand...
Click to collapse
Stock one ?
Lite OS one is inside the zip , you will get it after extracting the zip
RMX3370 said:
Stock one ?
Lite OS one is inside the zip , you will get it after extracting the zip
Click to expand...
Click to collapse
Ok perfect,THX