ADB Fastboot Essentials Kit By DroidScoop.net
This kit includes all the files necessary to run the android debug bridge or (ADB) while in Fastboot.
We've taken the time to extract all the files from the android SDK, as well as provide a walk through sheet that provides most of the commands necessary while using the ADB.
This is not a guide on how to use or set up ADB but a compilation of the essential files.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Whats included:
-ADB.exe
-AdbWinApi.dll
-AdbWinUsbApi.dll
-Fastboot.exe
-Read Me Guide.txt
-ADB Commands Cheat Sheet.txt
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
[COMMAND LIST]
FASTBOOT DEVICES
FASTBOOT REBOOT
FASTBOOT REBOOT-BOOTLOADER
FASTBOOT REBOOT-RECOVERY
FASTBOOT OEM UNLOCK
FASTBOOT OEM LOCK
FASTBOOT ERASE SYSTEM
FASTBOOT ERASE BOOT
FASTBOOT ERASE DATA
FASTBOOT ERASE CACHE
FASTBOOT ERASE RECOVERY
FASTBOOT FLASH RECOVERY ___.IMG
FASTBOOT FLASH HBOOT ___.IMG
FASTBOOT FLASH RADIO ___.IMG
FASTBOOT FLASH USERDATA ___.IMG
FASTBOOT FLASH SYSTEM ___.IMG
FASTBOOT FLASH BOOT ___.IMG
FASTBOOT UPDATE ___.ZIP
[DOWNLOAD]
Download our Kit at this DEV Host URL: http://d-h.st/oW7
If you have questions about the ADB itself feel free to ask
We hope this tool is a useful and convenient and as always please leave feedback and support our team!
Visit DroidScoop.net
Thank you,
Team Droid Scoop
DO NOT DOWNLOAD! 4 kinds of malware(detected, hopefully not more) in file
DroidScoop said:
ADB Fastboot Essentials Kit By DroidScoop.net
This kit includes all the files necessary to run the android debug bridge or (ADB) while in Fastboot.
We've taken the time to extract all the files from the android SDK, as well as provide a walk through sheet that provides most of the commands necessary while using the ADB.
This is not a guide on how to use or set up ADB but a compilation of the essential files.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Whats included:
-ADB.exe
-AdbWinApi.dll
-AdbWinUsbApi.dll
-Fastboot.exe
-Read Me Guide.txt
-ADB Commands Cheat Sheet.txt
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
[COMMAND LIST]
FASTBOOT DEVICES
FASTBOOT REBOOT
FASTBOOT REBOOT-BOOTLOADER
FASTBOOT REBOOT-RECOVERY
FASTBOOT OEM UNLOCK
FASTBOOT OEM LOCK
FASTBOOT ERASE SYSTEM
FASTBOOT ERASE BOOT
FASTBOOT ERASE DATA
FASTBOOT ERASE CACHE
FASTBOOT ERASE RECOVERY
FASTBOOT FLASH RECOVERY ___.IMG
FASTBOOT FLASH HBOOT ___.IMG
FASTBOOT FLASH RADIO ___.IMG
FASTBOOT FLASH USERDATA ___.IMG
FASTBOOT FLASH SYSTEM ___.IMG
FASTBOOT FLASH BOOT ___.IMG
FASTBOOT UPDATE ___.ZIP
[DOWNLOAD]
Download our Kit at this DEV Host URL: http://d-h.st/oW7
If you have questions about the ADB itself feel free to ask
We hope this tool is a useful and convenient and as always please leave feedback and support our team!
Visit DroidScoop.net
Thank you,
Team Droid Scoop
Click to expand...
Click to collapse
Thanks a lot
All,
I successfully updated my Moto G Stylus (2021) [RETUS / XT2115-1] with the following fastboot commands:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash vbmeta vbmeta.img
fastboot flash radio radio.img
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash recovery recovery.img
fastboot flash super super.img_sparsechunk.0
fastboot flash super super.img_sparsechunk.1
fastboot flash super super.img_sparsechunk.2
fastboot flash super super.img_sparsechunk.3
fastboot flash super super.img_sparsechunk.4
fastboot flash super super.img_sparsechunk.5
fastboot flash super super.img_sparsechunk.6
fastboot flash super super.img_sparsechunk.7
fastboot flash super super.img_sparsechunk.8
fastboot flash super super.img_sparsechunk.9
fastboot flash super super.img_sparsechunk.10
fastboot flash super super.img_sparsechunk.11
fastboot flash super super.img_sparsechunk.12
fastboot flash super super.img_sparsechunk.13
fastboot flash super super.img_sparsechunk.14
fastboot flash super super.img_sparsechunk.15
fastboot flash super super.img_sparsechunk.16
fastboot erase carrier
fastboot erase userdata [optional]
fastboot erase metadata
fastboot erase ddr
fastboot flash boot <name of magisk patched boot file.img> [optional]
fastboot oem fb_mode_clear
fastboot reboot
I downloaded the latest firmware from the Moto Rescue and Smart Assistant PC application.
Enjoy!
Caution: The flash commands can vary from one Software Channel to another, and the number sparsechunk(s) can change with the android versions.
You should always use the flashfile.xml or service.xml to get the flash commands.
Several ways to do that.
Online FlashFile Converter
Write a Batch File
XML to Bat Converter Tool for Windows
More here
[Guide] Using Fastboot.exe with Motorola devices
Guide: Using Fastboot.exe with Motorola Devices If your device has its own section please post in that section. You can ping me with @sd_shadow MediaTek or Qualcomm Chip? Do I have a MediaTek Device? see post #26 Info: If you have a MediaTek...
forum.xda-developers.com
sd_shadow said:
.....
You should always use the flashfile.xml or service.xml to get the flash commands.
.....
Click to expand...
Click to collapse
I like using Notepad++ to view a flashfile.xml from the extracted firmware. Right-click and open with, it formats it very nicely.
peajul said:
I successfully updated my Moto G Stylus (2021) [RETUS / XT2115-1] with the following fastboot commands: ...
Click to expand...
Click to collapse
Just curious, this was an actual "update"? OTA? Or did you just refresh a current install? Do you have a version number? I'm gonna plug-in to the MRSA app as soon as I can get my hands on my lady's phone, but I'm asking so I can be prepared for what I might find.
peajul said:
All,
I successfully updated my Moto G Stylus (2021) [RETUS / XT2115-1] with the following fastboot commands.....
Click to expand...
Click to collapse
Your list and order does match perfectly (except for the added Magisk-patched bootloader) with the flashfile.xml in my downloaded copy of XT2115-1_MINSK_RETUS_10_QPC30.Q4-31-26-1.
. . . I'm needing to reflash my lady's Stylus 2021, is why I went so far as to check in detail. Apparently I screwed up in manually copying the blocked numbers database from an older version of Android to her new XT2115-1. Something in Android 10 just doesn't like what I did (same thing I've done between Nougat and Pie with no problems at all). And then I further mangled the situation trying to fix it.
This guide assumes you have the SDK Platform Tools installed and working, along with USB drivers for your device (if needed), and have your full update zip which you've already extracted the payload.bin from, and then dumped the images using payload dumper. If you haven't done any of these things yet, there are plenty of other guides out there on how to do them.
Steps:
1. Reboot your device to the bootloader (power off, then hold volume up + power) and connect it to USB.
2. The following command will wipe your device. I found this to be necessary to recover my OnePlus 9:
Code:
fastboot -w
3. Now flash the following files:
Code:
fastboot flash boot boot.img
fastboot flash cpucp cpucp.img
fastboot flash dtbo dtbo.img
fastboot flash modem modem.img
fastboot flash oplusstanvbk oplusstanvbk.img
fastboot flash oplus_sec oplus_sec.img
fastboot flash qweslicstore qweslicstore.img
fastboot flash shrm shrm.img
fastboot flash splash splash.img
fastboot flash vbmeta vbmeta.img
fastboot flash vbmeta_vendor vbmeta_vendor.img
fastboot flash vbmeta_system vbmeta_system.img
fastboot flash vendor_boot vendor_boot.img
fastboot flash vm-bootsys vm-bootsys.img
4. Now reboot into userspace fastboot, aka fastbootd. If you don't do this, the remaining files cannot be flashed:
Code:
fastboot reboot fastboot
5. Flash the remaining files:
Code:
fastboot flash abl abl.img
fastboot flash aop aop.img
fastboot flash bluetooth bluetooth.img
fastboot flash devcfg devcfg.img
fastboot flash dsp dsp.img
fastboot flash featenabler featenabler.img
fastboot flash hyp hyp.img
fastboot flash imagefv imagefv.img
fastboot flash keymaster keymaster.img
fastboot flash multiimgoem multiimgoem.img
fastboot flash qupfw qupfw.img
fastboot flash tz tz.img
fastboot flash uefisecapp uefisecapp.img
fastboot flash xbl xbl.img
fastboot flash xbl_config xbl_config.img
fastboot flash product product.img
fastboot flash system system.img
fastboot flash system_ext system_ext.img
fastboot flash vendor vendor.img
fastboot flash odm odm.img
6. Final reboot:
Code:
fastboot reboot
7. If everything worked your phone should now boot into OxygenOS.
Note:
The files will be flashed to your currently active boot slot. If any of them fail to flash, switch to the other slot and start over from the beginning. I wasn't able to flash odm, product, system, system_ext and vendor to slot a, and had to use slot b instead. To check current slot:
Code:
fastboot getvar current-slot
To switch slots:
Code:
fastboot --set-active=a
or
Code:
fastboot --set-active=b
Use this guide at your own risk. I take no responsibility if you brick your device, set it on fire, or otherwise mess it up as a result of any of the above steps. That being said, it worked for me using 11.2.2.2.LE25AA available from the official OnePlus support website.
If you want, you can do the flashing easily with powershell, rather than running each command one after the other. Here is what I did:
1. Have fastboot.exe in your path, or in the same folder as all your extracted images. Open powershell and navigate to the folder with your boot images. Connect your phone to USB.
2. This will wipe your device! Reboot to the bootloader and run:
Code:
fastboot -w
3. Run:
Code:
gci -filter *.img | where {$_.Name.split('.')[0] -match 'boot|cpucp|dtbo|modem|oplusstanvbk|oplus_sec|qweslicstore|shrm|splash|vbmeta|vbmeta_vendor|vbmeta_system|vendor_boot|vm-bootsys'} | foreach-object { fastboot.exe flash $($_.Name.split('.')[0]) $_.Name }
4. Run:
Code:
fastboot reboot fastboot
5. Run:
Code:
gci -filter *.img | where {$_.Name.split('.')[0] -match 'abl|aop|bluetooth|devcfg|dsp|featenabler|hyp|imagefv|keymaster|multiimgoem|qupfw|tz|uefisecapp|xbl|xbl_config|product|system|system_ext|vendor|odm'} | foreach-object { fastboot.exe flash $($_.Name.split('.')[0]) $_.Name }
6. Run:
Code:
fastboot reboot
7. Proceed to boot normally.
The commands in steps 3 and 5 get a list of all files in the current directory with the .img extension, filter them to the correct ones to flash, and then flash them one after another.
If someone wants, I can probably throw together a script to run the whole process start to finish.
Edit: script attached. I've (unfortunately) had the opportunity to test it and fix all the bugs. So it works. You will need to have fastboot.exe accessible in your system PATH to run it.
Slikkster2k said:
If you want, you can do the flashing easily with powershell, rather than running each command one after the other. Here is what I did:
1. Have fastboot.exe in your path, or in the same folder as all your extracted images. Open powershell and navigate to the folder with your boot images. Connect your phone to USB.
2. Reboot to the bootloader and run:
Code:
fastboot -w
This will wipe your device!
3. Run:
Code:
gci -filter *.img | where {$_.Name.split('.')[0] -match 'boot|cpucp|dtbo|modem|oplusstanvbk|oplus_sec|qweslicstore|shrm|splash|vbmeta|vbmeta_vendor|vbmeta_system|vendor_boot|vm-bootsys'} | foreach-object { fastboot.exe flash $($_.Name.split('.')[0]) $_.Name }
4. Run:
Code:
fastboot reboot fastboot
5. Run:
Code:
gci -filter *.img | where {$_.Name.split('.')[0] -match 'abl|aop|bluetooth|devcfg|dsp|featenabler|hyp|imagefv|keymaster|multiimgoem|qupfw|tz|uefisecapp|xbl|xbl_config|product|system|system_ext|vendor|odm'} | foreach-object { fastboot.exe flash $($_.Name.split('.')[0]) $_.Name }
6. Run:
Code:
fastboot reboot bootloader
7. Proceed to boot normally.
The commands in steps 3 and 5 get a list of all files in the current directory with the .img extension, filter them to the correct ones to flash, and then flash them one after another.
If someone wants, I can probably throw together a script to run the whole process start to finish.
Click to expand...
Click to collapse
That would be helpful indeed. Would this script run on mac as well?
Not unless there's a version of PowerShell for macs (there is for Linux, but I don't know if it's compatible).
@Slikkster2k: I tried your tutorial. At first it did not work...serveral errors occure during copying one file. On the second run I had to change the slot, than it runs through.
But now I am in a boot loop, during starting the oxygen.
While wiping I got this message:
Code:
fastboot: error: Cannot generate image for userdata
Which version of the OS did you use?
I tried to install the actual european rom (11.2.3.3) on my indian device from china but this obviously did not work. Do you have any suggestions for me?
AxelM said:
@Slikkster2k: I tried your tutorial. At first it did not work...serveral errors occure during copying one file. On the second run I had to change the slot, than it runs through.
But now I am in a boot loop, during starting the oxygen.
While wiping I got this message:
Code:
fastboot: error: Cannot generate image for userdata
Which version of the OS did you use?
I tried to install the actual european rom (11.2.3.3) on my indian device from china but this obviously did not work. Do you have any suggestions for me?
Click to expand...
Click to collapse
I used 11.2.2.2.LE25AA as I said in the original post (this is the global variant, which matches my device). I am not sure if this works for cross-flashing, or if it's possible to cross-flash an Indian phone to EU. Have you tried restoring the Indian ROM? Does that work?
You're getting an actual boot loop? The error I was getting (and the reason I had to restore) was the phone booting to the bootloader or fastbootd (depending on the slot I tried) instead of Oxygen, because it couldn't mount the user partition due to encryption. In fastbootd an error was reported (I forget the exact one) which made me suspect it was a partition mounting issue. At no point was my phone actually boot looping, even during partial/failed flashes.
I've never encountered the error with fastboot -w, but I only did that on my phone once. From some searching online, it can be caused by an old version of the platform tools, so did you download the latest version?
@Slikkster2k: First of all, thank you for providing help
In deed, what worked was the indian first version. This i could flash and from there on everything works. Up to OS and than installing the latest european os. Now everything ist fine...
The error while whiping did not occure while using the indian version...so no clue why...
But now it works for me, thank you!
AxelM said:
@Slikkster2k: First of all, thank you for providing help
In deed, what worked was the indian first version. This i could flash and from there on everything works. Up to OS and than installing the latest european os. Now everything ist fine...
The error while whiping did not occure while using the indian version...so no clue why...
But now it works for me, thank you!
Click to expand...
Click to collapse
Glad to hear you got it working!
PowerShell script added to second post. Totally untested, but I tried to make it as idiot proof as possible.
Slikkster2k said:
This guide assumes you have the SDK Platform Tools installed and working, along with USB drivers for your device (if needed), and have your full update zip which you've already extracted the payload.bin from, and then dumped the images using payload dumper. If you haven't done any of these things yet, there are plenty of other guides out there on how to do them.
Steps:
1. Reboot your device to the bootloader (power off, hold volume up + power) and connect it to USB.
2. The following command will wipe your device. I found this to be necessary to recover my OnePlus 9:
Code:
fastboot -w
3. Now flash the following files:
Code:
fastboot flash boot boot.img
fastboot flash cpucp cpucp.img
fastboot flash dtbo dtbo.img
fastboot flash modem modem.img
fastboot flash oplusstanvbk oplusstanvbk.img
fastboot flash oplus_sec oplus_sec.img
fastboot flash qweslicstore qweslicstore.img
fastboot flash shrm shrm.img
fastboot flash splash splash.img
fastboot flash vbmeta vbmeta.img
fastboot flash vbmeta_vendor vbmeta_vendor.img
fastboot flash vbmeta_system vbmeta_system.img
fastboot flash vendor_boot vendor_boot.img
fastboot flash vm-bootsys vm-bootsys.img
4. Now reboot into userspace fastboot, aka fastbootd. If you don't do this, the remaining files cannot be flashed:
Code:
fastboot reboot fastboot
5. Flash the remaining files:
Code:
fastboot flash abl abl.img
fastboot flash aop aop.img
fastboot flash bluetooth bluetooth.img
fastboot flash devcfg devcfg.img
fastboot flash dsp dsp.img
fastboot flash featenabler featenabler.img
fastboot flash hyp hyp.img
fastboot flash imagefv imagefv.img
fastboot flash keymaster keymaster.img
fastboot flash multiimgoem multiimgoem.img
fastboot flash qupfw qupfw.img
fastboot flash tz tz.img
fastboot flash uefisecapp uefisecapp.img
fastboot flash xbl xbl.img
fastboot flash xbl_config xbl_config.img
fastboot flash product product.img
fastboot flash system system.img
fastboot flash system_ext system_ext.img
fastboot flash vendor vendor.img
fastboot flash odm odm.img
6. Reboot back into the bootloader:
Code:
fastboot reboot bootloader
7. You should now be able to continue booting normally by pressing the power button.
Note:
The files will be flashed to your currently active boot slot. If any of them fail to flash, switch to the other slot and start over from the beginning. I wasn't able to flash odm, product, system, system_ext and vendor to slot a, and had to use slot b instead. To switch slots:
Code:
fastboot --set-active=a
or
Code:
fastboot --set-active=b
Use this guide at your own risk. I take no responsibility if you brick your device, set it on fire, or otherwise mess it up as a result of any of the above steps. That being said, it worked for me using 11.2.2.2.LE25AA available from the official OnePlus support website.
Click to expand...
Click to collapse
My phone has been weird for a week or so occasionally freezing up and saying system ui has crashed or something so I followed these instructions last night to completely wipe and reset everything (after backing up). It worked perfectly!
My only suggestion would be for step 7 to be:
fastboot reboot
Since we're already using fastboot it's just quicker and less fiddly than using the power button
toyanucci said:
That would be helpful indeed. Would this script run on mac as well?
Click to expand...
Click to collapse
Windows offered now to add to MAC - https://support.apple.com/en-us/HT201468
toyanucci said:
My phone has been weird for a week or so occasionally freezing up and saying system ui has crashed or something so I followed these instructions last night to completely wipe and reset everything (after backing up). It worked perfectly!
My only suggestion would be for step 7 to be:
fastboot reboot
Since we're already using fastboot it's just quicker and less fiddly than using the power button
Click to expand...
Click to collapse
Thanks, updated OP.
ok i kind of bricked my phone using this and i need a little help PLEASE?
Ok i tried the fist 2 steps 1. fastboot -w than the first list of commands using cmd with admin rights it worked...i think but it did load everything without issues...now i go to do the "fastboot reboot fastboot"
and now my phone is stuck on a black screen with nothing and i just hear the chime windows makes when you disconnect and reconnect a device..... and in the Device manager this comes up for 10 seconds than goes away for 5 than comes back NON STOP
i cant adb i cant do anything please help !
I'm not sure if this will help you, but I had a lot of issues initially running this. First off you need to use the Oneplus drivers, I don't think the qualcom driver will work the same way. I could be wrong, but that's what I did. Secondly, you need to force install the driver because Windows doesn't like it.
Here are the steps I took.
1. Uninstall any old drivers.
2. Install the newest Oneplus Drivers from here https://oneplususbdrivers.com/
3. Extract the zip file and run the installer like normal
4. Once the installer finishes, you'll need to reboot your machine and bring up the Startup settings (hold down shift and reboot (keep holding down shift until you get a screen with options)) Then click advanced and startup settings and hit restart after that. Once the machines starts up, on the first boot you will have a bunch of options. Choose option 7 "disabling driver signature enforcement" mode.
5. Once Windows launches and you login, go back into the device manager and follow these steps:
right click the device --> update driver
Browse my computer for drivers
Let me pick from a list of available drivers on my computer
Show all Devices --> Next
Have Disk (Button)
Navigate to where you installed Oneplus drivers (Default: C:\Program Files (x86)\OnePlus USB Drivers)
Select "OnePlus_android_winusb.inf"
Select "Oneplus Android Bootloader Interface" and then just hit next/OK until it installs.
You might need to reboot after doing the above, but this worked for me.
----------------------------------------
The above should get your drivers working properly in all modes (adb, fastbootd, bootloader, normal)
One other issue that I ran into when I was using the powershell script was that I was seeing intermittent errors. After trial and error I realized that Windows was picking up a different version of fastboot. I was initially using the minimal adb/fastboot files, but if you compare those to the ones listed in the first post in the "SDK Platform Tools", they are very different from each other, so you need to make sure you use the SDK Platform Tools version. The minimal ADB/Fastboot version will NOT work.
After I got those 2 things ironed out, the powershell script ran without a hiccup and my phone is stock and booting without an issue.
I know I'm late to respond to this thread, but I hope someone finds this information helpful!
Mine keeps trying this and it isn't running and or rebooting into Fastbootd when the script is ran. Should I just try and invoke this manually? I've tried that as well an I'm seeming to get errors left and right with no resolve.
I'd say try it manually and see where the errors happen. Does it boot into fastbootd at all?
Good work
toyanucci said:
I'd say try it manually and see where the errors happen. Does it boot into fastbootd at all?
Click to expand...
Click to collapse
Actually, I ended up making my phone hard bricked to the point where it doesn’t even turn on at this point. I’m just going to send it in for repair, which is nothing short of being due to my stupidity.
ilikepie___ said:
Actually, I ended up making my phone hard bricked to the point where it doesn’t even turn on at this point. I’m just going to send it in for repair, which is nothing short of being due to my stupidity.
Click to expand...
Click to collapse
It's probably stuck in edl mode. Nothing on the screen, no vibration or anything but it shows up in device manager when connected to a computer?
Try the man tool mentioned Here that worked for me.
toyanucci said:
It's probably stuck in edl mode. Nothing on the screen, no vibration or anything but it shows up in device manager when connected to a computer?
Try the man tool mentioned Here that worked for me.
Click to expand...
Click to collapse
I’ll give it a shot, yeah it doesn’t do anything. Can’t see a display or anything on the screen.
I got Motorola Edge S from China, and plan to:
1. Unlock (Succeeded !)
2a. fastboot flash boot twrp-3.5.2_11.0-2-nio.img
fastboot flash boot_b twrp-3.5.2_11.0-2-nio.img
SD card cannot work properly, as well as Adb sideload, so Official LOS.zip cannot be flashed,
OR
2b. fastboot flash boot lineage-19.1-20220604-recovery-nio.img
fastboot flash boot_b lineage-19.1-20220604-recovery-nio.img
Stucked on the Boot-up screen with Logo before Recovery mode.
3. flash Stock EU rom
(to achieve more international firmware, since I don't find independent firmware.zip)
4. flash LOS rom
N.B. [data] partition had been cleared, and I should haven't cleared [system] partition, but I cannot boot back to stock rom after Step 2, and I believe the stock rom has been removed for any accident.
Please help
Might be a long shot here, but I bricked G100 when trying to flash to both slots. Use the Motorola device recovery tool to bring it back to stock and flash only ONE slot (the active one) with your rom. There's installation scripts on this forum that do exactly this for you.
twelfth said:
Might be a long shot here, but I bricked G100 when trying to flash to both slots. Use the Motorola device recovery tool to bring it back to stock and flash only ONE slot (the active one) with your rom. There's installation scripts on this forum that do exactly this for you.
Click to expand...
Click to collapse
Initially I just flash one slot. Then I read that inconsistency between 2 slots can cause problem, so I have flash 2nd slot also, by copy-partitions-20210323_1922.zip or by "fastboot flash boot_b ...".
Now, I can also recovery and boot back to stock rom, by flash boot.img extracted from stock rom.zip with the same version as mine.
So the KEY problem is:
Under TWRP recovery loader, with ADB sideload turned on, the PC seems cannot connect & send below crucial command to Android:
$ fastboot flash boot lineage-19.1-20220604-recovery-nio.img
N.B. I have already used USB driver from Motorola, so ADB commands can run without problem, except ADB Sideload mode. Also, I have tried using USB 2.0 hub port with 2.0 cable (4-pins) as well.
TWRP for nio is not stable (yet). Use the instructions for lineageos official.
patwwh said:
I got Motorola Edge S from China, and plan to:
1. Unlock (Succeeded !)
2a. fastboot flash boot twrp-3.5.2_11.0-2-nio.img
fastboot flash boot_b twrp-3.5.2_11.0-2-nio.img
SD card cannot work properly, as well as Adb sideload, so Official LOS.zip cannot be flashed,
OR
2b. fastboot flash boot lineage-19.1-20220604-recovery-nio.img
fastboot flash boot_b lineage-19.1-20220604-recovery-nio.img
Stucked on the Boot-up screen with Logo before Recovery mode.
3. flash Stock EU rom
(to achieve more international firmware, since I don't find independent firmware.zip)
4. flash LOS rom
N.B. [data] partition had been cleared, and I should haven't cleared [system] partition, but I cannot boot back to stock rom after Step 2, and I believe the stock rom has been removed for any accident.
Please help
Click to expand...
Click to collapse
Late here but on 2a step, you can actually copy the ROM zip to internal storage since windows can detect your phone as storage device when it is in TWRP recovery.
https://wiki.lineageos.org/devices/nio/install is telling everything you need to know.
Though:
NEW:
Code:
fastboot devices
fastboot --set-active=a
// Update firmware
// Files taken from https://mirrors.lolinet.com/firmware/motorola/nio/official/RETEU/
fastboot flash modem_a NON-HLOS.bin
fastboot flash modem_b NON-HLOS.bin
fastboot erase mdmddr
fastboot flash fsg_a fsg.mbn
fastboot flash fsg_b fsg.mbn
fastboot erase mdm1m9kefs1
fastboot erase mdm1m9kefs2
fastboot flash bluetooth_a BTFM.bin
fastboot flash bluetooth_b BTFM.bin
fastboot erase carrier
fastboot erase ddr
fastboot reboot bootloader
fastboot devices
fastboot --set-active=a
// First setup
// Files taken from https://mirror.math.princeton.edu/pub/lineageos/full/nio/
fastboot flash dtbo_a dtbo.img
fastboot flash dtbo_b dtbo.img
fastboot flash vendor_boot_a vendor_boot.img
fastboot flash vendor_boot_b vendor_boot.img
fastboot reboot bootloader
fastboot devices
fastboot --set-active=a
// Install recovery
// Files taken from https://download.lineageos.org/nio
fastboot flash boot <recovery_filename>.img
for example:
fastboot flash boot_a <recovery.img>
fastboot flash boot_b <recovery.img>
fastboot reboot recovery
// Be sure all firmware is consistant
// Files taken from https://mirrorbits.lineageos.org/tools/copy-partitions-20220613-signed.zip
adb sideload copy-partitions-20220613-signed.zip
fastboot reboot recovery
FRESH INSTALL OF LINEAGE
Code:
Reboot into recovery
CHECK WHICH IS THE ACTIVE PARTITION, FIRST TIME A
Goto “Factory reset”
Goto “Format data/factory reset”
Goto “Format data”
Goto “Apply Update”
Goto “Apply from adb”
adb sideload <lineageos.zip>
Goto “Advanced”
Goto “Reboot to recovery” (now active partition is changed to the updated one)
CHECK WHICH IS THE ACTIVE PARTITION, FIRST TIME SHOULD BE B!!
Reboot to system and setup...
(This is how I do it...)
(On updates, active partition is switching on reboot after you have done a flash of lineageos.zip file)
(Forget TWRP for this device as it is not finished and several bugs are there. Just use Lineage OS)
TWRP only works on Android 11, above that nothing will work and it will be very buggy
This CAN be done. Please note of course that I am NOT responsible for bricked devices.
I tried it on an XT2113-2 after finding this Moto G Power thread (kudos to the ever-informative @sd_shadow for giving my nerves a boost with his post):
How to downgrade Android 11 to 10
I unfortunately decided to upgrade my Moto G Power 2020 to Android 11 when the update was available and have had many issues most of which is that it is now very slow and battery drain is much higher. Have tried the many suggestions online to...
forum.xda-developers.com
I successfully downgraded from Android 11 to 40-95-6. I did not have the last Android 10 version 40-95-9, so I had to fall back one more version. But it worked 100% fine, no snags at all.
Instructions for downgrading:
1. *** Bootloader MUST be UNLOCKED ***. Downgrading will NOT work on a locked bootloader, it will fail rollback protection. If you try and it fails, your current firmware is ilkely trashed and you'll have to reflash it.
2. Make sure you have a copy (uncompressed) of the firmware version you want to download to.
3. Copy all unzipped firmware files to your ADB folder, and open a command window.
4. Reboot to bootloader ("adb reboot bootloader" from system, or from power off, press Power + Volume-Down until bootloader screen shows).
5. "fastboot devices" in command window to check connection between phone and PC (I used Windows 7).
6. Manually run all fastboot commands listed below, or use a batch file, or maybe try RSDLite (run flashfile.xml in the firmware folder). RSDLite is old, but the last version of it (6.2.4) worked fine on a Moto G Stylus 2021 that I unlocked and rooted a year ago. It's a fairly simple tool that has aged well thus far.
7. Check that each flash command finished with an OKAY (actually 2 OKAYs). It ANY fail, you should start all over, or suspect that your firmware download is corrupt, or USB cable is bad . . .
8. If ALL files flashed OKAY, "fastboot reboot" or use the Volume and Power keys.
Commands (your firmware may be slightly different, possibly one extra sparsechunk file):
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash vbmeta vbmeta.img
fastboot flash radio radio.img
fastboot flash bluetooth btfm.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash recovery recovery.img
fastboot flash super super.img_sparsechunk.0
fastboot flash super super.img_sparsechunk.1
fastboot flash super super.img_sparsechunk.2
fastboot flash super super.img_sparsechunk.3
fastboot flash super super.img_sparsechunk.4
fastboot flash super super.img_sparsechunk.5
fastboot flash super super.img_sparsechunk.6
fastboot flash super super.img_sparsechunk.7
fastboot flash super super.img_sparsechunk.8
fastboot erase carrier
fastboot erase ddr
fastboot erase userdata ... optional but advised (included in flashfile.xml but not in servicefile.xml)
fastboot oem fb_mode_clear
fastboot reboot
I posted this in the wrong section. I hope a diligant moderator will find and correct my mistake soon.
Moondroid said:
I posted this in the wrong section. I hope a diligant moderator will find and correct my mistake soon.
Click to expand...
Click to collapse
That’s what the report button is for
I've posted in the wrong section
sd_shadow said:
That’s what the report button is for
I've posted in the wrong section
Click to expand...
Click to collapse
I thought about trying that but was afraid it might set off a 3-alarm fire or something. Lol.
Badger50 got it fixed for me.