Database Info

[HOW TO] Carrier Switch Galaxy S8/S8+ **SNAPDRAGON**

*READ FIRST*
This thread is now completely dedicated to the aspect of Carrier Switching on the Snapdragon model of the Galaxy S8/S8+, the current root progress can be seen here:
Current ROOT Progress for G950U/G955U Snapdragon
Please Note that if your device is network locked this WILL NOT unlock it for use on other carriers, however it will allow the switching of carriers and carrier specific features on network unlocked devices just by changing sim cards, the device will reboot and your done. As for those with a network locked device this thread still applies to you, if you are interested in a bloat free experience(that is faster and smoother than stock touchwiz), on your Galaxy S8/S8+​
Let's Begin!
Download the firmware for the unlocked S8/S8+ here:
G950U1UE1AQDC_XAA
Download the Prince Cosmy version of Odin here:
Odin_3.12.3_Modified
Enable developer options on your device:
Settings----->About Phone----->Click Build Number 7 times
Enable USB Debugging:
Settings----->Developer Options-----USB Debugging
Put your device into download mode: Volume Down + Bixby + Power
(accept the warning and connect your device to your computer)
Take the G950U1.zip you downloaded in step 1 and extract it, then place the BL,AP,CP,and CSC files into their corresponding places within Odin and press start
Once finished the device will boot back up and you will be free to disconnect it from your computer
You now have the unlocked, bloat free, firmware on your S8/S8+
CONTRIBUTORS
@Maltego for hosting files
@mweinbach for originally getting the unlocked firmware and for posting a tutorial on flashing it
@Acoustichayes for creating a dedicated root thread​

Delete

I have the s8+ version installing now. Will report back. Op make sure they uncheck Auto reboot and f. Reset time in odin first.
Sent from my Nexus 6P using Tapatalk

I've been getting protocol version errors trying to flash via odin 3.10 (the only one that I can download)
EDIT: installing now, needed the latest odin

Akumai said:
I've been getting protocol version errors trying to flash via odin 3.10 (the only one that I can download)
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=529152257862722617
Here is Odin 3.12.3

Persianhawkes said:
I have the s8+ version installing now. Will report back. Op make sure they uncheck Auto reboot and f. Reset time in odin first.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
This is for an s8....Not plus. Be careful.

suzook said:
This is for an s8....Not plus. Be careful.
Click to expand...
Click to collapse
I know. I have the s8+ file. Flashed and booted up now I have to do some tinkering.
Sent from my Nexus 6P using Tapatalk

I can't wait to give this a run this weekend

Persianhawkes said:
I know. I have the s8+ file. Flashed and booted up now I have to do some tinkering.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Oh, ok. Didn't realize that. So does this overwrite the carrier info? Or is that untouched?

suzook said:
Oh, ok. Didn't realize that. So does this overwrite the carrier info? Or is that untouched?
Click to expand...
Click to collapse
As of right now there is no way to overwrite carrier info, we are working on it though. That reserved comment is going to be where i put all that is known, been tried, etc with carrier switching just a little busy right now

My build number is SM-G950A and my firmware is G950USQU1AQD9. I am quite familiar with the concept and process of rooting but I have never had an opportunity to actually get into it. I was wondering if my device is compatible with this firmware. If so I am fine with testing so long as there is a reliable way to restore my phone if something were to happen.

Triforce1001 said:
My build number is SM-G950A and my firmware is G950USQU1AQD9. I am quite familiar with the concept and process of rooting but I have never had an opportunity to actually get into it. I was wondering if my device is compatible with this firmware. If so I am fine with testing so long as there is a reliable way to restore my phone if something were to happen.
Click to expand...
Click to collapse
I went ahead and did the favors of doing some testing, in terms of restoral anyhow. From my experience, you do not have access to the usual desktop, and you have very few apps by default(none actually, just settings). I was able to revert to the original stock firmware via odin without a hitch. I did not try installing TWRP on this firmware however, but I can confirm the existence of OEM Unlock, which, by itself, claims to unlock the bootloader.

Triforce1001 said:
My build number is SM-G950A and my firmware is G950USQU1AQD9. I am quite familiar with the concept and process of rooting but I have never had an opportunity to actually get into it. I was wondering if my device is compatible with this firmware. If so I am fine with testing so long as there is a reliable way to restore my phone if something were to happen.
Click to expand...
Click to collapse
This is compatible with your device all US versions of the S8 and S8+ have the same model number. I have your stock firmware i just need to upload it to androidfilehost

If anyone feels like it joining I have created an IRC room we can all chat in and brainstorm things. It's #sgs8 on irc.freenode.net. Hasn't had many users since I created it but I lurk in there when I'm at home. I'd love some company. Let's get this thing rooted so we can shut all the haters up!

Glad to see more devs working on this

Akumai said:
I went ahead and did the favors of doing some testing, in terms of restoral anyhow. From my experience, you do not have access to the usual desktop, and you have very few apps by default(none actually, just settings). I was able to revert to the original stock firmware via odin without a hitch. I did not try installing TWRP on this firmware however, but I can confirm the existence of OEM Unlock, which, by itself, claims to unlock the bootloader.
Click to expand...
Click to collapse
I attempted to install TWRP on it but secure check fail boot i believe i will try again, but we only have the exynos twrp for the S8 to work with....
Unless someone can make a compatible version for Snapdragon?

Akumai said:
I went ahead and did the favors of doing some testing, in terms of restoral anyhow. From my experience, you do not have access to the usual desktop, and you have very few apps by default(none actually, just settings). I was able to revert to the original stock firmware via odin without a hitch. I did not try installing TWRP on this firmware however, but I can confirm the existence of OEM Unlock, which, by itself, claims to unlock the bootloader.
Click to expand...
Click to collapse
On no device that ive seen does OEM unlock in fact unlock the bootloader.
sent from my S8 plus, Note 7 or S7 Edge

STF_TimelessGoD said:
I attempted to install TWRP on it but secure check fail boot i believe i will try again, but we only have the exynos twrp for the S8 to work with....
Unless someone can make a compatible version for Snapdragon?
Click to expand...
Click to collapse
Contact @ashyx he's very good with Samsung and TWRP

force70 said:
On no device that ive seen does OEM unlock in fact unlock the bootloader.
sent from my S8 plus, Note 7 or S7 Edge
Click to expand...
Click to collapse
it merely mentioned that it allows "the unlocking of the bootloader"

Akumai said:
it merely mentioned that it allows "the unlocking of the bootloader"
Click to expand...
Click to collapse
Thats not what that means is what im trying to say lol. That option on sammy phones has never really done much other than allow flashing in odin
What is of note is that i dont have that on my S8 which is new that option is always there.

SM-G965U G965USQS4CSC8 & SM-G965U1 G965U1UEU4CSC7 Apr-21-19 Official PIE Firmware

Introduction:
Download official G965USQS4CSC8 (carrier) and G965U1UEU4CSC7 (unlocked) firmware for the SM-G965U and SM-G965U1 here. You can flash either onto a SM-G965U or SM-G965U1 using the patched Odin linked below. Flashing back and forth is safe because they are both on bootloader version 4.
Click to expand...
Click to collapse
Patch Level:
Carrier SM-G965U 04-01-19 (CSC8)
Unlocked SM-G965U1 03-01-19 (CSC7)
Click to expand...
Click to collapse
So, what is userdata?
A lot of people think this is carrier bloat only. However, userdata also contains the files necessary to activate carrier specific features. Without it, you may not be able utilize all of the carrier features that the phone is capable of providing. Please note that carrier userdata may not be available for your carrier.
Click to expand...
Click to collapse
SM-G965U1 (unlocked version) users read here:
Drawbacks of flashing carrier version G965USQS4CSC8 firmware on the unlocked phone (SM-G965U1):
CallerID no longer works unless you subscribe to carriers CallerID service.
Installs carrier bloat.
Benefits of flashing carrier version G965USQS4CSC8 firmware on the unlocked version phone (SM-G965U1):
Will enable all carrier specific features (video calling, etc, etc).
Click to expand...
Click to collapse
SM-G965U (carrier version) users read here:
Drawbacks of flashing unlocked version G965U1UEU4CSC7 firmware on the carrier version phone (SM-G965U):
Will disable all carrier specific features (video calling, etc, etc).
Benefits of flashing unlocked version G965U1UEU4CSC7 firmware on the carrier version phone (SM-G965U):
CallerID works without subscribing to carriers CallerID service.
Eliminates carrier bloat.
Click to expand...
Click to collapse
Installation Instructions:
Reboot to download mode:
Power off your Galaxy S9 Plus completely until it vibrates.
Press and hold the Volume Down + Bixby + Power buttons simultaneously. Release the buttons when you see the warning message.
Now just press Volume up button to continue.
Congratulations, you're now in download mode.
Connect your phone to your PC:
Start the patched Odin 3.13.1 that you downloaded from the provided link.
Plug the cord your phone came with into your phone and PC. Other cords may not work.
The Odin log will display a <ID:0/005> Added!! message once it connects.
Flash the firmware:
First, extract the compressed firmware to a folder on your PC.
In Odin, begin with the BL (bootloader) box, navigate to the firmware folder and select the file beginning with BL_.
Wait for each file to initialize and appear to the right of its corresponding box before attempting to proceed to the next step.
Now select the AP (Application Processor aka System) box, it should open the correct folder, then select the file beginning with AP_.
AP takes a while to initialize, don't worry.
Now select the CP (Core Processor aka modem) box, then select the file beginning with CP_.
Now select the CSC (Consumer Software Customization aka Carrier Settings) box, then select the file beginning with CSC_.
Choose HOME_CSC to not wipe your phone, or CSC_ (preferred option when switching between unlocked and carrier versions) to wipe your phone .
Optionally, select the userdata (User Data) box, then select the file beginning with USERDATA_.
Now, click start and wait for the magic.
Disconnect the cord when the phone reboots.
The phone should boot to recovery to automatically cleanup, then reboot again.
Click to expand...
Click to collapse
Downloads:
Download SM-G965U Firmware Here
Download SM-G965U1 Firmware Here
Download patched Odin Here
Click to expand...
Click to collapse

I v just one question. How do I restore a tripped knox after flashing or restore my flash count to zero?
Sent from my SM-G965F using Tapatalk

Got a non-Android File host mirror? They're slow or not working for me at all no matter what mirror of theirs I choose.

samson007 said:
I v just one question. How do I restore a tripped knox after flashing or restore my flash count to zero?
Sent from my SM-G965F using Tapatalk
Click to expand...
Click to collapse
Tripped knox is forever. There is a fuse that blows on the phone. That said, there are workarounds on rooted phones (you might as well stay rooted). Try looking for edits for the build.prop to restore functionality to Samsung Health and other affected apps. Dr Ketan still makes ROMs I believe and should have something for you.

NLA

NLA

Then I won't root. The only reason I want to root is because I need to use mod apps like Spotify but sadly all the ones v been downloading never worked. Can you help me out please. Thank you
rmarinella said:
Tripped knox is forever. There is a fuse that blows on the phone. That said, there are workarounds on rooted phones (you might as well stay rooted). Try looking for edits for the build.prop to restore functionality to Samsung Health and other affected apps. Dr Ketan still makes ROMs I believe and should have something for you.
Click to expand...
Click to collapse
Sent from my SM-G965F using Tapatalk

samson007 said:
Then I won't root. The only reason I want to root is because I need to use mod apps like Spotify but sadly all the ones v been downloading never worked. Can you help me out please. Thank you
Click to expand...
Click to collapse
I don't want to be rude, but your question was answered already. You can't untrip the know counter. It's an actual fuse, that physically becomes blown. This isn't a software setting, but an actual, physical fuse.
It goes back to the days of people using exploits, and in rare cases would damage their phone in the process, but the phone worked enough to relock the bootloader. Then the person would send their phone back and blame it on the manufacturer. So now Samsung decided to put in an actual fuse so that if you decide to unlock it, your warrenty is permanently void.
Bottom line, your out of luck. I know any unlock would have given a warning that it is PERMANENT and that it would VOID YOUR WARRENTY. Wether you read it and ignored the warning, or didn't bother to read it, it's on you for unlocking your bootloader.

todd3835 said:
I don't want to be rude, but your question was answered already. You can't untrip the know counter. It's an actual fuse, that physically becomes blown. This isn't a software setting, but an actual, physical fuse.
It goes back to the days of people using exploits, and in rare cases would damage their phone in the process, but the phone worked enough to relock the bootloader. Then the person would send their phone back and blame it on the manufacturer. So now Samsung decided to put in an actual fuse so that if you decide to unlock it, your warrenty is permanently void.
Bottom line, your out of luck. I know any unlock would have given a warning that it is PERMANENT and that it would VOID YOUR WARRENTY. Wether you read it and ignored the warning, or didn't bother to read it, it's on you for unlocking your bootloader.
Click to expand...
Click to collapse
Yea I remember those days... Well truth is I haven't rooted.. I was considering it until I read the warranty part... My point is, the reason I want it rooted is because I want to use some modded applications. I researched further and found out I could use some without even rooting. So i tried downloading Spotify mod app, but unfortunately it didn't work. I couldn't get recent application for it, what I kept getting was an outdated mod app. In all it didn't work. So am asking if there's a way to use mod apps without rooting the phone. Thank you
Sent from my SM-G965F using Tapatalk

samson007 said:
Yea I remember those days... Well truth is I haven't rooted.. I was considering it until I read the warranty part... My point is, the reason I want it rooted is because I want to use some modded applications. I researched further and found out I could use some without even rooting. So i tried downloading Spotify mod app, but unfortunately it didn't work. I couldn't get recent application for it, what I kept getting was an outdated mod app. In all it didn't work. So am asking if there's a way to use mod apps without rooting the phone. Thank you
Click to expand...
Click to collapse
You'll have to wait until someone mods the latest app. Or, you could just pay for Spotify. For the record, I used to use a modded Spotify, and they typically patch within a day or two of a modded apk being released. They may have finally switched to server side authentication which is why your likely not seeing an updated version. I stopped bothering because it's just a cat and mouse game. I didn't feel like Spotify was worth it, so I moved on.
I find Google Play Music is a better deal. I get add-free YouTube, and all the same music as Spotify, for the same price.
On a side note, I don't believe Xda allows modded apks that bypass paid features. There are sites that cater to such things, but I'm pretty sure it's a no-no here. They tend to support devs / companies as opposed to cheating them out of money.

Hi dude, I have 2 questions, I just buy S9+ 965U sprint unlock running U3ARH7 can I flash this 965U1's fw? and What is CSC in U1 fw? thanks

optimus207 said:
Hi dude, I have 2 questions, I just buy S9+ 965U sprint unlock running U3ARH7 can I flash this 965U1's fw? and What is CSC in U1 fw? thanks
Click to expand...
Click to collapse
Hi, you can flash the U1 firmware on the Sprint 965U. You need to use the patched Odin linked in the OP. The CSC file included is for multiple carriers. When flashing it will read your sim and setup accordingly.

Umm what's new? The "I" September patch Odin's have been out since mid September.
rmarinella said:
Introduction:
SM-G965U1 (unlocked version) users read here:
SM-G965U (carrier version) users read here:
Installation Instructions:
Downloads:
Click to expand...
Click to collapse

The thread provides detailed instructions and the most current firmware. The instructions are new to the thread and so are the links. Didn't realize I was required to explain what was new to you.

Uploading G965USQS3ARIB firmware now.

Hi, Q. If I install the ARIB version in my U1 under att, I still can use another carrier sim right?
I'm traveling to Argentina soon and I want to know that.
Thanks

Should be fine , your U1 is unlocked. The sim card in Argentina might not set up the APN for you regardless of what firmware you're on. Personally, I would use the U1 firmware though.

juannicolas said:
Hi, Q. If I install the ARIB version in my U1 under att, I still can use another carrier sim right?
I'm traveling to Argentina soon and I want to know that.
Thanks
Click to expand...
Click to collapse
I don't use the "B" revision firmwares, but there was at least one listed as a BOYD firmware. Since your already on U1 and loosing wifi-calling, HD voice, volte, etc, that might give you the best luck. Might be something to look into.

todd3835 said:
I don't use the "B" revision firmwares, but there was at least one listed as a BOYD firmware. Since your already on U1 and loosing wifi-calling, HD voice, volte, etc, that might give you the best luck. Might be something to look into.
Click to expand...
Click to collapse
Sorry, didn't understood your response. Is that an yes besides regaining the features of HDVoice, volte and Wifi Calling?
Thanks

juannicolas said:
Sorry, didn't understood your response. Is that an yes besides regaining the features of HDVoice, volte and Wifi Calling?
Thanks
Click to expand...
Click to collapse
You asked about sim swapping for traveling. The BYOD firmware makes for easier sim swapping. It's designed to populate the carrier settings when you insert a sim instead of needing to wipe your device.
As for ATT features, I believe those firmware are for the U firmware, so yes, you'd regain those features, but you'd get the ATT bloat. I don't mind the bloat personally. I just remove the junk I don't need.

SM-A205U (MetroPCS) OEM Unlock

Hello,
Just wanted to share this with the community as I found this just yesterday. If you goto your settings and click connections then "More connection settings" towards the bottom there is an option for "Network Unlock". I did this like I said yesterday and it permanent unlocked the phone. I don't have any other SIM cards to try and see if it will go on a different network but just wanted to point this out to the community!
~DJ

djdeath15 said:
Hello,
Just wanted to share this with the community as I found this just yesterday. If you goto your settings and click connections then "More connection settings" towards the bottom there is an option for "Network Unlock". I did this like I said yesterday and it permanent unlocked the phone. I don't have any other SIM cards to try and see if it will go on a different network but just wanted to point this out to the community!
~DJ
Click to expand...
Click to collapse
That's not an OEM unlock, you've only unlocked the SIM card lock.

Into the sun you go

I wondered if this was either effecting, &or blocking or stopping oem unlock from showing or being visible? Just a thought.

ATGkompressor said:
I wondered if this was either effecting, &or blocking or stopping oem unlock from showing or being visible? Just a thought.
Click to expand...
Click to collapse
It's our specific model.
There are no 205u units in public domain that exist with an oem toggle.
It's disabled by default in the 205u source.

The only way this might be possible is with combination firmware but in all my searching so far i have yet to find bootloader 5 combination firmware ...
If anyone can find me a bootloader 5 android 10 combination firmware for the 205U varient i would be willing to see if there would be a way to get this rooted and bootloader unlocked

https://www.full-repair-firmware.com/2019/08/Combination-a205u.html

physwizz said:
https://www.full-repair-firmware.com/2019/08/Combination-a205u.html
Click to expand...
Click to collapse
Has everything except binary 5, probably gonna be waiting on that for a while

ninjasinabag said:
Has everything except binary 5, probably gonna be waiting on that for a while
Click to expand...
Click to collapse
Bin 4 won't work?

physwizz said:
Bin 4 won't work?
Click to expand...
Click to collapse
It would help for anyone still on pie if we could flash it.
Anyone who upgraded to Q would be in the cold for now.

i cant use bin 4 on my device because i upgragded to android 10 already on it so i couldnt even test to see if it was possible thats why im looking for combo firmware bootloader 5

ninjasinabag said:
It would help for anyone still on pie if we could flash it.
Anyone who upgraded to Q would be in the cold for now.
Click to expand...
Click to collapse
Yo I got this phone and figured it's a paperweight until root aka on Android 9 installed magisk manager , zarchiver and combination file matching numbers. Here is where I'm at a lack of expertise cuz magisk won't install enough to feed it the boot.img. Please Help Anyone:silly:

ddougg said:
Yo I got this phone and figured it's a paperweight until root aka on Android 9 installed magisk manager , zarchiver and combination file matching numbers. Here is where I'm at a lack of expertise cuz magisk won't install enough to feed it the boot.img. Please Help Anyone:silly:
Click to expand...
Click to collapse
The combination file is from an older bootloader, so it retains the most recent bootloader to maintain integrity of the Qfuse.
That's kinda why we want the combination file for 10, the bootloader hasn't changed which means the file would be universal for anyone who updates.

ninjasinabag said:
The combination file is from an older bootloader, so it retains the most recent bootloader to maintain integrity of the Qfuse.
That's kinda why we want the combination file for 10, the bootloader hasn't changed which means the file would be universal for anyone who updates.
Click to expand...
Click to collapse
yo Ninja I found the latest firmware with the u5 bootloader . It won't let me upload , bummer. I'll try again tonight. help

ddougg said:
yo Ninja I found the latest firmware with the u5 bootloader . It won't let me upload , bummer. I'll try again tonight. help
Click to expand...
Click to collapse
Do you have a link or anything to the source? I'll check it out and test when home

Ninja Do you have an email I could send the files to? Mega is being itchy bout an account from 3years ago and drive wants to copy my entire laptop,

I have the 205U as well I never could get antything to work I tried Odin and Magisk did not work I do have Android 10 as well I just look at the fix website I dont know what to do there or it would work with my latest vversion of my phone willl shoud I try to use it and would it be done it hasd 5 fixes that need to be installed ?

U is Unrootable

techmanc said:
I have the 205U as well I never could get antything to work I tried Odin and Magisk did not work I do have Android 10 as well I just look at the fix website I dont know what to do there or it would work with my latest vversion of my phone willl shoud I try to use it and would it be done it hasd 5 fixes that need to be installed ?
Click to expand...
Click to collapse
At the moment, all U devices are unrootable.

Try this
https://forum.xda-developers.com/galaxy-a20/how-to/a205-bootloader-unlock-twrp-root-t4189197

General Got my Edge S, unlocked bootloader and Magisk root

Basically the title. I received my Chinese Edge S today, so far I like it but I've barely used it. I thought I got a model with Gapps preloaded, but I was wrong (big surprise). I sideloaded Play Store, but haven't gotten much farther. Unlocking the bootloader was a little difficult, I had to factory reset, with the SIM card installed, to get "OEM Unlocking" to not be grayed out. But from there it was simple, I used the Motorola website to get the unlock code, ran it, no problem. I just followed the normal Magisk instructions: I installed the Magisk app, found the boot.img file inside the ROM download from the Lenovo Rescue and Smart Assistant, patched it with Magisk, flashed it via fastboot and I'm rooted. Once I hid Magisk, Google Pay seems to work fine (although it says NFC is not set up...I'll have to test it tomorrow for tap to pay to see if it works; when I go into NFC settings it says Google Pay is default). I'll let you all know how it goes. I also downloaded Google Assistant, but as I suspected it isn't working. I tried to sideload Gapps from Android 10, but it didn't work. I'll have to try TWRP later, or maybe wait until an Android 10 Gapps is available.
EDIT: Since I have root, is there a way install the Gapps? I found BiTGApps which has Android 11 support, but it only lists TWRP install method and there's currently no TWRP for this phone.

HopelesRomantc91 said:
Basically the title. I received my Chinese Edge S today, so far I like it but I've barely used it. I thought I got a model with Gapps preloaded, but I was wrong (big surprise). I sideloaded Play Store, but haven't gotten much farther. Unlocking the bootloader was a little difficult, I had to factory reset, with the SIM card installed, to get "OEM Unlocking" to not be grayed out. But from there it was simple, I used the Motorola website to get the unlock code, ran it, no problem. I just followed the normal Magisk instructions: I installed the Magisk app, found the boot.img file inside the ROM download from the Lenovo Rescue and Smart Assistant, patched it with Magisk, flashed it via fastboot and I'm rooted. Once I hid Magisk, Google Pay seems to work fine (although it says NFC is not set up...I'll have to test it tomorrow for tap to pay to see if it works; when I go into NFC settings it says Google Pay is default). I'll let you all know how it goes. I also downloaded Google Assistant, but as I suspected it isn't working. I tried to sideload Gapps from Android 10, but it didn't work. I'll have to try TWRP later, or maybe wait until an Android 10 Gapps is available.
EDIT: Since I have root, is there a way install the Gapps? I found BiTGApps which has Android 11 support, but it only lists TWRP install method and there's currently no TWRP for this phone.
Click to expand...
Click to collapse
Wow, thanks for all this info. That is great that you were already able to root and get Magisk on there with minimal issues. This is pretty much what I do with my phones right out of the box. Regarding that link for Gapps, I read through the start of that thread and the package is definitely what we'll probably need for this phone. But, without a working recovery at this point, I don't think there is another way to install it.

That's awesome that you did that. I received my code from Moto, but I need to factory reset myself to get the OEM unlock slider to not be grayed out. I'm just waiting for the G100 Rom to be available and flash it then.
Until then. its a pretty sweet phone for the money.

syncrosys said:
That's awesome that you did that. I received my code from Moto, but I need to factory reset myself to get the OEM unlock slider to not be grayed out. I'm just waiting for the G100 Rom to be available and flash it then.
Until then. its a pretty sweet phone for the money.
Click to expand...
Click to collapse
If you don't mind me asking, where did you purchase the phone? And where do you live?
Edit: Just saw your answer in the other thread.

CCivale said:
If you don't mind me asking, where did you purchase the phone? And where do you live?
Edit: Just saw your answer in the other thread.
Click to expand...
Click to collapse
It's worth noting that I cancelled my Giztop purchase and bought from Aliexpress instead. Can't remember if I actually said that or not.

there is twrp, it is experimental

Electimon said:
there is twrp, it is experimental
Click to expand...
Click to collapse
I couldn't find it, can you link it?

Electimon said:
there is twrp, it is experimental
Click to expand...
Click to collapse
Can you link it?

syncrosys said:
That's awesome that you did that. I received my code from Moto, but I need to factory reset myself to get the OEM unlock slider to not be grayed out. I'm just waiting for the G100 Rom to be available and flash it then.
Until then. its a pretty sweet phone for the money.
Click to expand...
Click to collapse
Any idea when the G100 ROM will be available?
Can you please describe the steps on how to flash the new ROM?

ktitimbo said:
Any idea when the G100 ROM will be available?
Can you please describe the steps on how to flash the new ROM?
Click to expand...
Click to collapse
I imagine it'll be available as soon as the phone itself is, just a matter of someone downloading the G100 ROM with RSA, then uploading it for the rest of us. I also imagine the process will simply be to download it, and rename it so RSA will flash it instead of the Chinese ROM for us, but that's really only speculation at this point. It may have a checksum that would make flashing a little more difficult, in which case it would be a matter of installing TWRP (once available) and then flashing that way.

@HopelesRomantc91
Can you share the URL for unlock code request?
I couldn't unlock with global website...

I think I just used the global one here: https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a/

Hello, I have patched boot img to my moto edge S 5g Chinese version and I have magisk root ok but if I restart the motorola it is lost and I have to reinstall boot parched, do you know why?

HopelesRomantc91 said:
I imagine it'll be available as soon as the phone itself is, just a matter of someone downloading the G100 ROM with RSA, then uploading it for the rest of us. I also imagine the process will simply be to download it, and rename it so RSA will flash it instead of the Chinese ROM for us, but that's really only speculation at this point. It may have a checksum that would make flashing a little more difficult, in which case it would be a matter of installing TWRP (once available) and then flashing that way.
Click to expand...
Click to collapse
Thanks for info . İs flashing g100 rom need root device or unlocking bootloader ?

How To Guide Edge 2021 (unlocked) special flashing guide

You can manually update to latest Android 11 (April patch)
Bootloader unlock may be required.
Download the ROM https://mirrors.lolinet.com/firmwar...-DEFAULT_regulatory-DEFAULT_cid50_CFC.xml.zip
Unpack the zip and enter bootloader (turn the phone off and press and hold volume down and power it on)
Flash everything EXCEPT radio.img. Failure to do it will result in NO SIM error!
Everything is better with this version ROM. Do not update to Android at this time because it's a mess.

I manually upgraded to A12 on my XT2141-2 as soon as I was able. The only issue I've had was SIM not detected with 1 specific Lsposed module enabled, disabling that one module resolved that though. And ofc not having Gravity Box yet kinda sucks but I've had a blast with new theming possibility with A12 thanks to Repainted and Project Themed apps.
Could you elaborate on any issues you experienced yourself?

Sorry to have to ask this, but what happens if I somehow screw things up? unless I'm mistaken there's no TWRP for this phone (yet) to help with recovery...and how might I go about backing things up before I try to flash a new ROM build on my device? (Still new to things)
edit: addition: probably a stupid question, but I've only ever flashed the `boot.img` file, am I supposed to "fastboot flash" every file over?

ruq said:
Sorry to have to ask this, but what happens if I somehow screw things up? unless I'm mistaken there's no TWRP for this phone (yet) to help with recovery...and how might I go about backing things up before I try to flash a new ROM build on my device? (Still new to things)
edit: addition: probably a stupid question, but I've only ever flashed the `boot.img` file, am I supposed to "fastboot flash" every file over?
Click to expand...
Click to collapse
will this unlock verizon edge 5g

jakethesnake24 said:
will this unlock verizon edge 5g
Click to expand...
Click to collapse
No. Everything I've read states that Verizon Phones are hard-locked-down and cannot be rooted, unless there exists or is discovered at some point in the future an exploit to crack such phones. Sorry if that means you're out of luck.
I believe the preferred way of having a rootable phone is to always outright purchase it independently of any carrier. I purchased mine unlocked at a Best Buy.

In case anyone is reading this and getting a 404 on the OG post link for the ROM I found it under this updated link.