Database Info

.11 OTA Update Issue

Alright, I have tried just about everything and keep running into the same roadblock so I am going to post here and see if someone has an idea of what is going on and how to work around it. I will outline each method used below as detailed as I can. I'm currently on 9.5.9 and looking to upgrade to .11. I'm currently on Slot B.
First Method:
1.) Disabled all Magisk modules / themes etc
2.) Downloaded .11 OTA from OnePlus Updater
3.) Installed locally via System Updates
4.) Installed TWRP A/B Retention Script in Magisk
5.) Magisk OTA install to inactive slot
6.) Reboot
Result: Reboots to TWRP in the new slot but no pin number is requested and no files showing under Install, cannot reboot to system. I reboot to slot b and try again.
Second Method:
1.) Disabled all Magisk modules / themes etc
2.) Downloaded .11 OTA from OnePlus Updater
3.) Reboot to TWRP
4.) Flash ROM
5.) Flash TWRP installer
6.) Reboot recovery
Result: Reboots to TWRP in the new slot but no pin number is requested and no files showing under Install, cannot reboot to system. I reboot to slot b and try again.
Third Method:
1.) Disabled all Magisk modules / themes etc
2.) Download / Install via system updates message to upgrade to .10
4.) Installed TWRP A/B Retention Script in Magisk
5.) Magisk OTA install to inactive slot
6.) Reboot
Result: Reboots to TWRP in the new slot but no pin number is requested and no files showing under Install, cannot reboot to system. Upon rebooting to slot b I at least got a notification that the update had failed and to enter repair mode to attempt again, however, I decided to not do this yet to avoid issues with breaking root / TWRP.
-----
As you can see... I am getting to the point of rebooting to recovery in the new slot but am unable to do anything in terms of flashing ROM > TWRP > Magisk to update both slots or do anything in the new slot. I'm almost assuming a clean ROM flash, flash TWRP / Magisk might fix any issues but I want to prod you all first for a solution before I go with the nuclear option.

i.Design said:
Alright, I have tried just about everything and keep running into the same roadblock so I am going to post here and see if someone has an idea of what is going on and how to work around it. I will outline each method used below as detailed as I can. I'm currently on 9.5.9 and looking to upgrade to .11. I'm currently on Slot B.
First Method:
1.) Disabled all Magisk modules / themes etc
2.) Downloaded .11 OTA from OnePlus Updater
3.) Installed locally via System Updates
4.) Installed TWRP A/B Retention Script in Magisk
5.) Magisk OTA install to inactive slot
6.) Reboot
Result: Reboots to TWRP in the new slot but no pin number is requested and no files showing under Install, cannot reboot to system. I reboot to slot b and try again.
Second Method:
1.) Disabled all Magisk modules / themes etc
2.) Downloaded .11 OTA from OnePlus Updater
3.) Reboot to TWRP
4.) Flash ROM
5.) Flash TWRP installer
6.) Reboot recovery
Result: Reboots to TWRP in the new slot but no pin number is requested and no files showing under Install, cannot reboot to system. I reboot to slot b and try again.
Third Method:
1.) Disabled all Magisk modules / themes etc
2.) Download / Install via system updates message to upgrade to .10
4.) Installed TWRP A/B Retention Script in Magisk
5.) Magisk OTA install to inactive slot
6.) Reboot
Result: Reboots to TWRP in the new slot but no pin number is requested and no files showing under Install, cannot reboot to system. Upon rebooting to slot b I at least got a notification that the update had failed and to enter repair mode to attempt again, however, I decided to not do this yet to avoid issues with breaking root / TWRP.
-----
As you can see... I am getting to the point of rebooting to recovery in the new slot but am unable to do anything in terms of flashing ROM > TWRP > Magisk to update both slots or do anything in the new slot. I'm almost assuming a clean ROM flash, flash TWRP / Magisk might fix any issues but I want to prod you all first for a solution before I go with the nuclear option.
Click to expand...
Click to collapse
First method was the right method. But don't flash the ab retention script. Flash the file in system update then go to magisk and flash to inactive slot. Reboot after that and when you boot back up flash the twrp installer in magisk and reflash root and reboot to recovery to verify its there.

joemossjr said:
First method was the right method. But don't flash the ab retention script. Flash the file in system update then go to magisk and flash to inactive slot. Reboot after that and when you boot back up flash the twrp installer in magisk and reflash root and reboot to recovery to verify its there.
Click to expand...
Click to collapse
I'm assuming you mean flash TWRP installer via Magisk once rebooted? I just want to make certain before trying again.

i.Design said:
I'm assuming you mean flash TWRP installer via Magisk once rebooted? I just want to make certain before trying again.
Click to expand...
Click to collapse
Yes

joemossjr said:
Yes
Click to expand...
Click to collapse
This didn't work. I was able to at least see my storage now and installed OTA via TWRP > TWRP installer > Magisk to update Slot B now I'm having the same issue in both slots.

there has to be something else up with your device. I would try a clean flash with magisk or try the latest magisk canary build.

I have downloaded the 11 update via OxygenUpdater using VPN (Location is set to France)
Since i diden't get the update on my real location.
Rebooted to TWRP->Flashed 11 update->Flashed TWRP->Rebooted to TWRP>Flashed Magisk>Flashed Kernel>Rebooted to System.
Everything seems to be working.

Try this simple and straight forward method,
Download the full zip 9.5.11, not the update zip but full zip,
Transfer to phone storage,
wipe only dalvik cache and data, DO NOT WIPE SYSTEM OR VENDOR, OR INTERNAL STORAGE,
Flash the oos zip,
Flash twrp, Reboot recovery,
Flash oos zip file again followed by twrp,
Reboot recovery,
Flash magisk 19.3,
Now Reboot system,
Do not click on any slots in twrp let the system select the appropriate slot, system will take some time to boot also will Reboot itself, but will boot eventually,
hope this helps, cheers.

How this helps, worked for me, I don't have T-Mobile version
i.Design said:
Alright, I have tried just about everything and keep running into the same roadblock so I am going to post here and see if someone has an idea of what is going on and how to work around it. I will outline each method used below as detailed as I can. I'm currently on 9.5.9 and looking to upgrade to .11. I'm currently on Slot B.
First Method:
1.) Disabled all Magisk modules / themes etc
2.) Downloaded .11 OTA from OnePlus Updater
3.) Installed locally via System Updates
4.) Installed TWRP A/B Retention Script in Magisk
5.) Magisk OTA install to inactive slot
6.) Reboot
Result: Reboots to TWRP in the new slot but no pin number is requested and no files showing under Install, cannot reboot to system. I reboot to slot b and try again.
Second Method:
1.) Disabled all Magisk modules / themes etc
2.) Downloaded .11 OTA from OnePlus Updater
3.) Reboot to TWRP
4.) Flash ROM
5.) Flash TWRP installer
6.) Reboot recovery
Result: Reboots to TWRP in the new slot but no pin number is requested and no files showing under Install, cannot reboot to system. I reboot to slot b and try again.
Third Method:
1.) Disabled all Magisk modules / themes etc
2.) Download / Install via system updates message to upgrade to .10
4.) Installed TWRP A/B Retention Script in Magisk
5.) Magisk OTA install to inactive slot
6.) Reboot
Result: Reboots to TWRP in the new slot but no pin number is requested and no files showing under Install, cannot reboot to system. Upon rebooting to slot b I at least got a notification that the update had failed and to enter repair mode to attempt again, however, I decided to not do this yet to avoid issues with breaking root / TWRP.
-----
As you can see... I am getting to the point of rebooting to recovery in the new slot but am unable to do anything in terms of flashing ROM > TWRP > Magisk to update both slots or do anything in the new slot. I'm almost assuming a clean ROM flash, flash TWRP / Magisk might fix any issues but I want to prod you all first for a solution before I go with the nuclear option.
Click to expand...
Click to collapse
OP7PRO, stock ROM, stock kernel
This has been ABSOLUTELY working for me and how i was used doing it back in the days..
*After switching off all modules in Magisk and do a system reboot to apply this..
(Do I have to mention it's probably best, when updating to disable any password/fingerprint protection when rebooting AFTER FLASHING OTA, TWRP and Magisk in recovery?)
*I didn't use local update setting.
*What's on in developer options?
-OEM Unlock allowed
-Advanced reboot
-USB Debugging
*Don't know if having these developer settings otherwise would interfere, I just try to write it down as specific as of how i did this.
*Also: I didn't even bother looking at A/B partitioning and where to install what, please correct me if i could be wrong, but using this method worked for me and also when installing TWRP zip in recovery, the log showed A/B sloth solution success when installing.
*Not using substratum themes etc., but I want to say it's probably best to go as clean as you can anyway, since you can always go back being beautiful afterwards I guess?
So try remember where you left off being a makeup loving customiser and momentary revert being as clean as possible.. at least for maybe 20 minutes okay?
How I did it:
-Download the OTA update zip on your phone (full update file zip just shy of 2 Gb) using oxygen updater app in Google playstore.
(Don't install the systemsoftware zip from the oxygen updater once downloaded), you're going to install the systemsoftware.zip in TWRP recovery as opposed to update via Magisk to install the new systemsoftware).
-Download TWRP (INSTALLER!!) have this ZIP on phone (Find it by reading some posts about TWRP Installer zip or use link below)
*I used: twrp-installer-3.3.1-4-guacamole.zip
https://dl.twrp.me/guacamole/ (for TWRP zip)
-Download Magisk zip
*I used: Magisk-v19.3.zip
(So far 3 zip files, have them somewhere pretty obvious on your phone)
-Boot into recovery (I did this by using this option in Magisk manager)
Then:
-Flash the update OTA ROM.zip (just shy of 2Gb)
*DON'T REBOOT*!!!!
-Go back in TWRP recovery menu, Flash TWRP Installer zip
-Still in TWRP recovery menu go back, Reboot to recovery
-Back in TWRP, flash Magisk zip
-Clear Dalvik cache (not sure if this is actually still needed)
-Reboot system normally, enable Magisk modules you want, reboot system...
Updated to 9.5.10 works
Updated to 9.5.11 works
Updated to 10.0.0 works

I can't find the full zip for 9511 anywhere

joemossjr said:
there has to be something else up with your device. I would try a clean flash with magisk or try the latest magisk canary build.
Click to expand...
Click to collapse
I ended up having to reformat to deal with the encryption issue. After reformatting I was able to boot to slot b and am at .11 now!
I'm really hoping this ordeal fixed whatever the problem was so that future OTA's aren't this much of a headache. I'll keep the tips in mind. I'm just glad to have a working device at .11 with root even if I have to re-install all of my apps etc.

virtyx said:
I can't find the full zip for 9511 anywhere
Click to expand...
Click to collapse
It's live on XDA frontpage.
---
I think best update method is get full zip, do local upgrade, flash Magisk after OTA on inactive slot, reboot, flash TWRP installer via magisk and reflash magisk (direct method). Reboot and zero issues.

smariob said:
It's live on XDA frontpage.
---
I think best update method is get full zip, do local upgrade, flash Magisk after OTA on inactive slot, reboot, flash TWRP installer via magisk and reflash magisk (direct method). Reboot and zero issues.
Click to expand...
Click to collapse
just came up now
what i normally do is flash full zip
reboot
then reboot fastboot and boot twrp, then flash twrp then magisk.
i like the OS boot first time without twrp or magisk, just habit i guess
everything working fine, nightscape also
EDIT:
i think SWAP has been turned off in 9.5.11
it no longer displays in ElementalX app (with stock kernel)

What did I do wrong?
Someone help me shed some light. I'm not sure what I did wrong while updating using magisk.
So this is the steps I did.
1. Installed the OTA update
2. In magisk went to install to inactive slot (after OTA)
3. Then it went through the motions and restarted.
At the screen where you put the password in it shut down and then went to the stock recovery. Tried again, same thing. So after some panicking I did this.
Reflashed twrp via computer
Flashed the uninstall of magisk
Flashed twrp zip
Restarted it and everything is fine now. I just had to re-flash the modules which was quite annoying.
So what did I do wrong? Have I buggered up anything to do with the inactive slots or partitions?

I don't know why people have such difficulty?
1. Get the full zip via Oxygen Updater or some other method.
2. Do a local install vis the settings. DO NOT REBOOT.
3. Install Magisk via the "Install after OTA" from Magisk Manager.
4. Reboot
5. You will now have the slot rooted that you updated.
6. Run the local install again. This will install to the other slot. It will fail the first attempt. Do it again.
7. Install Magisk via the OTA option and reboot.
You have now updated both slots and rooted them.
If you would like TWRP or custom kernels, follow those instructions.
If you install TWRP, you MUST install Magisk in the same slot or you will get a boot loop for that slot.
That is the reason why I keep both slots at the same OS level and rooted with TWRP installed.

What country guys you are from that you are getting update? Im in USA and still got nothing.

netgar said:
What country guys you are from that you are getting update? Im in USA and still got nothing.
Click to expand...
Click to collapse
Using oxygen updater, try disabling all.mods before checking for update. Or in oxygen updater settings, select advanced mode, and see if update is available.

Krsmqn said:
Using oxygen updater, try disabling all.mods before checking for update. Or in oxygen updater settings, select advanced mode, and see if update is available.
Click to expand...
Click to collapse
By mods you mean magisk modules?
Update
Advanced option did the job. Updated with magisk and few magisk modules + few substratum themes.
Thx

netgar said:
By mods you mean magisk modules?
Update
Advanced option did the job. Updated with magisk and few magisk modules + few substratum themes.
Thx
Click to expand...
Click to collapse
Yeah, meant magisk modules, sorry. But looks like you got it anyway. ?

All update methods to 11 failed.

[GUIDE][OP7][9.0/10.0/11.0] Unlock Bootloader | TWRP | Root with Magisk | Update

Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Introduction
This thread is dedicated to newbies and rooting, so if you're familiar with the whole procedure, you're done
Just ask questions about every step and you'll receive help!
Downloads
TWRP Installer ZIP and TWRP IMG for Android 9/10: https://forum.xda-developers.com/oneplus-7/development/recovery-unofficial-twrp-recovery-t3932943
TWRP for Android 11(including instructions, thank's to @Nebrassy ): https://forum.xda-developers.com/t/recovery-11-unofficial-teamwin-recovery-project.4289455/
TWRP Installer ZIP = For example twrp-3.4.0-10-guacamole-unified-installer-mauronofrio.zip
TWRP IMG = For example twrp-3.4.0-10--guacamole-unified-Q-mauronofrio.img
Check for Pie or Q TWRP IMG! If you have Android Pie, choose Pie TWRP IMG, if you have Android Q, choose Q TWRP IMG.
The TWRP Installer ZIP works on Android Pie(9)/Q(10)
Magisk ZIP: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Hints
If you need to update TWRP or Magisk, always keep older versions of both in hand(Magisk canary or beta may have issues)
Remove your lockscreen protection which also removes encryption to prebvent mounting issues within TWRP
Before proceeding
Your Windows PC should already recognized your device with the USB cable
Use an USB cable provided with the phone
Make sure your Windows Explorer is set up to have file extensions enabled to avoid file name issues
This process will FORMAT/WIPE/DELETE your internal storage and every file of your phone, so please back it off your device at first!
Also keep a boot.img from your current system in place if anything went wrong so you can flash it via fastboot, see "Rooting without TWRP" for how to get it.
Rooting with TWRP (Android 9/10)​
Steps for unlocked bootloader with TWRP AND Root(Magisk)
1. Follow this guide to unlock your Oneplus 7 bootloader(wipes everything on your device, works for OP7 pro and OP7): https://forum.xda-developers.com/showpost.php?p=79741564&postcount=2.
2. Your phones bootloader is now unlocked, leave the phone plugged to your PC
3. Make sure you have enabled USB-Debugging and Advanced Reboot under developer options(see step 1 how to enable it all) again after the first boot of the wiped device, since this gets reset
4. Copy the latest "TWRP installer ZIP" and "Magisk ZIP" to the phones internal storage.
5. Copy the "TWRP IMG" to the "platform-tools" folder from step 1.
6. Open command window or PowerShell window again if you did not closed it before within the "platform-tools" folder from step 1
7. Type
Code:
adb devices
to see if your device is connected and recognized sucessfully by your PC.
8. Type
Code:
adb reboot bootloader
to reboot to fastboot mode.
9. Type
Code:
fastboot boot recoveryimgfilename.img
to temporary boot TWRP, where recoveryimgfilename.img is the name of your downloaded TWRP *.img file, so watch your file name!.
10. Enter your screen lock PIN within TWRP if you have set it up before.
11. Allow modifications.
12. Now you have temporary booted twrp recovery. To make it stick permanently you need to flash the "TWRP installer ZIP" from your phones storage from step 4.
13. Hit "install" and navigate to the "TWRP installer ZIP" file and select it for installation(dont boot the system now!).
14. Go back and flash "Magisk ZIP" the same way as for TWRP Zip otherwise your device will not boot!
15. Thats all, you can unplug the USB cable and boot the device to your system. Your device is now bootloader unlocked with TWRP and Magisk:highfive:
Steps for unlocked bootloader with TWRP WITHOUT Root(Magisk)
1. Follow this guide to unlock your Oneplus 7 bootloader(wipes everything on your device, works for OP7 pro and OP7): https://forum.xda-developers.com/showpost.php?p=79741564&postcount=2.
2. Your phones bootloader is now unlocked, leave the phone plugged to your PC
3. Make sure you have enabled USB-Debugging and Advanced Reboot under developer options(see step 1 how to enable it all) again after the first boot of the wiped device, since this gets reset
4. Copy the latest "TWRP IMG" to the phones internal storage.
5. Copy the latest "TWRP IMG" to the "platform-tools" folder from step 1.
6. Open command window or PowerShell window again if you did not closed it before within the "platform-tools" folder from step 1
7. Type
Code:
adb devices
to see if your device is connected and recognized sucessfully by your PC.
8. Type
Code:
adb reboot bootloader
to reboot to fastboot mode.
9. Type
Code:
fastboot boot recoveryimgfilename.img
to temporary boot TWRP, where recoveryimgfilename.img is the name of your downloaded TWRP *.img file, so watch your file name!.
10. Enter your screen lock PIN within TWRP if you have set it up before.
11. Allow modifications.
12. Now you have temporary booted twrp recovery. To make it stick permanently you need to flash the "TWRP IMG" from your phones storage from step 4
13. Navigate to advanced menu within TWRP, click on "Install Recovery Ramdisk" and select the "TWRP IMG". This will patch the boot image which does Magisk otherwise.
14. Thats all, you can unplug the USB cable and boot the device to your system. Your device is now bootloader unlocked with TWRP:highfive:
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Rooting without TWRP (Android 9/10/11)​
Also useful to get stock recovery and kernel --> Recovery is within boot.img on A/B devices like OP7
Refer here for unlocking the bootloader.
1. Download the payload dumper tool to your PC from here and extract it
2. Download the FULL OxygenOS Rom zip(The version your phone is running) and extract the payload.bin
3. Put payload.bin to "payload_input" folder o the extracted tool
4. Run payload_dumper.exe from the tool's folder
5. Extracted img files are in "payload_output" folder
6. Now you have your own boot.img for your Rom
7. Copy it to your phone
8. Patch the boot.img with Magisk directly on your device: Magisk Manager App -> hit install after your Magisk version -> hit "Select and Patch a file"
9. Copy the patched boot.img (it should be in the Download folder of your device named something like "magisk_patched-22100_bjjRn.img") back to your PC
10. Reboot your device to fastboot
11. Flash the patched magisk_patched-22100_bjjRn.img
Code:
fastboot flash boot_a magisk_patched-22100_bjjRn.img
fastboot flash boot_b magisk_patched-22100_bjjRn.img
12. Reboot your device. Now you have your phone rooted without the need of TWRP (Check with Magisk Manager App)
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Update your rooted OxygenOS (Android 9/10)​Steps for UPDATE OxygenOS via OTA and keep unlocked bootloader, TWRP, Root(Magisk)
1. [OPTIONAL, but highly recommended]Backup everything in case of issues!
2. Go to Magisk Manager App and uninstall all modules
2.1 [Optional]: For some modules(read those instructions) you should do an reboot now, then proceed
3. Go to Android settings -> system -> system update and hit "Download & Install Now", don't reboot yet!
4. (not for Android 11)Flash "TWRP ZIP" within Magisk Manager App like a Module: Magisk Manager App -> Menu -> Modules "+". This installs TWRP to both a/b partitions.
5. Install Magisk via Magisk Manager App again: Magisk Manager App -> hit install after your Magisk version -> hit "install to inactive slot"
6. Reboot your device
7. Reinstall your Magisk Modules(maybe a reboot is necessary)
Your device is now updated via OTA and you keep TWRP and Root:highfive:
Steps for UPDATE OxygenOS via local upgrade and keep unlocked bootloader, TWRP, Root(Magisk)
1. [OPTIONAL, but highly recommended]Backup everything in case of issues!
2. Download the full rom zip file and place it into the root folder of your storage(/storage/emulated/0)
3. Go to Magisk Manager App and uninstall all modules
2.1 [Optional]: For some modules(read those instructions) you should do an reboot now, then proceed
4. Go to Android settings -> system -> system update and hit gear icon top right -> local upgrade, don't reboot yet!
5. (not for Android 11)Flash "TWRP ZIP" within Magisk Manager App like a Module: Magisk Manager App -> Menu -> Modules "+". This installs TWRP to both a/b partitions.
6. Install Magisk via Magisk Manager App again: Magisk Manager App -> hit install after your Magisk version ->hit "install to inactive slot"
7. Reboot your device
8. Reinstall your Magisk Modules(maybe a reboot is necessary)
Your device is now updated via local upgrade and you keep TWRP and Root:highfive:
If you have any issues, just feel free to ask!

@strongst you should maybe write in your guide that magisk flash is a must! Without phone won't boot if it's stock.
There are a lot of people who wanna flash TWRP without magisk. I don't know why they do that it makes no sense for me.

Kollachi said:
@strongst you should maybe write in your guide that magisk flash is a must! Without phone won't boot if it's stock.
There are a lot of people who wanna flash TWRP without magisk. I don't know why they do that it makes no sense for me.
Click to expand...
Click to collapse
I made it a little bit more clear, thanks, that's an common issue across several devices and requested often enough

Thank you for the quick tutorial. For me it looks very similar to the procedure with the OnePlus 5, am I right?
Does this indicate, that an EFS Backup is also to create the same way? https://forum.xda-developers.com/oneplus-5/how-to/oneplus-5-unlock-bootloader-flash-twrp-t3624877
BR
Axel

AxelM said:
Thank you for the quick tutorial. For me it looks very similar to the procedure with the OnePlus 5, am I right?
Does this indicate, that an EFS Backup is also to create the same way? https://forum.xda-developers.com/oneplus-5/how-to/oneplus-5-unlock-bootloader-flash-twrp-t3624877
BR
Axel
Click to expand...
Click to collapse
There's something different after unlocking the bootloader(which is the same). Twrp and magisk installation is different due to treble.
For EFS you can backup with twrp or local terminal
dd if=/dev/block/sdf2 of=/sdcard/modemst1.bin bs=512

Thanks for the guide, my OnePlus 7 came with 9.5.5 and I want to clean flash to the latest 9.5.8. I have already unlocked the bootloader, boot into TWRP and installed TWRP, are these the correct steps to flash 9.5.8 as I'm confused with the A/B partition?
1. Wipe data, cache, system and internal storage
2. Flash 9.5.8 signed flashable zip
3. Flash kernel and Magisk or the other way round?

Camack said:
Thanks for the guide, my OnePlus 7 came with 9.5.5 and I want to clean flash to the latest 9.5.8. I have already unlocked the bootloader, boot into TWRP and installed TWRP, are these the correct steps to flash 9.5.8 as I'm confused with the A/B partition?
1. Wipe data, cache, system
2. Flash 9.5.8 signed flashable zip
3. Flash kernel and Magisk or the other way round?
Click to expand...
Click to collapse
1. Wipe data, cache, system and internal storage
2. Flash 9.5.8 signed flashable zip with current twrp
3. Flash twrp installer zip with current twrp
4. Flash magisk zip with current twrp
5. Reboot
Make sure not to FORMAT internal data, otherwise you wipe the files you want to flash as it formats sdcard

strongst said:
1. Wipe data, cache, system and internal storage
2. Flash 9.5.8 signed flashable zip with current twrp
3. Flash twrp installer zip with current twrp
4. Flash magisk zip with current twrp
5. Reboot
Make sure not to FORMAT internal data, otherwise you wipe the files you want to flash as it formats sdcard
Click to expand...
Click to collapse
Thanks, so I boot into TWRP first and then do step 1 and 2? Also, which step should I flash custom kernel?

Camack said:
Thanks, so I boot into TWRP first and then do step 1 and 2? Also, which step should I flash custom kernel?
Click to expand...
Click to collapse
You need to do all steps. I recommend to flash the custom kernel when you've sucessfully booted the device at first.

Hi, a new OP7 User here. I wanted to know how can i keep my data decrypted? i have installed TWRP but i want to decrypt my data and also keep it the same after updated newer updates. Is it possible? I was able to do it on my OP3T, so wanted to know if its possible on OP7 as well

murti52 said:
Hi, a new OP7 User here. I wanted to know how can i keep my data decrypted? i have installed TWRP but i want to decrypt my data and also keep it the same after updated newer updates. Is it possible? I was able to do it on my OP3T, so wanted to know if its possible on OP7 as well
Click to expand...
Click to collapse
This should work https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389

strongst said:
This should work https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
Click to expand...
Click to collapse
I think i messed up real bad, now when iam booting the phone, a message comes, your device is corrupt. It can't be trusted and will not boot.

murti52 said:
I think i messed up real bad, now when iam booting the phone, a message comes, your device is corrupt. It can't be trusted and will not boot.
Click to expand...
Click to collapse
That message is the bootloader unlocked warning and comes every time as soon as you unlocked the bootloader.
Flashing DM verity patch can only be done when you format internal storage which wipes everything of your internal storage. You can't "decrypt" your existing data permanently with this.

strongst said:
That message is the bootloader unlocked warning and comes every time as soon as you unlocked the bootloader.
Flashing DM verity patch can only be done when you format internal storage which wipes everything of your internal storage. You can't "decrypt" your existing data permanently with this.
Click to expand...
Click to collapse
No, this is not the same, i can't even go to fastboot or anything, it's hardbricked.

murti52 said:
No, this is not the same, i can't even go to fastboot or anything, it's hardbricked.
Click to expand...
Click to collapse
If you have really bricked it: https://forum.xda-developers.com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325

strongst said:
If you have really bricked it: https://forum.xda-developers.com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325
Click to expand...
Click to collapse
Sadly it didn't worked, as phone doesn't gets detected on pc, keeps on rebooting. Gave it to service center and they are also not able to solve it ??. So a replacement for me ?
Edit : i think the force decryption was the culprit. When i rebooted, system was crashing. Op3t had its specific force decrypt file, not a general one, So i think as the development moves forward, op7 will also get it's own. Hoping the best ?

murti52 said:
Sadly it didn't worked, as phone doesn't gets detected on pc, keeps on rebooting. Gave it to service center and they are also not able to solve it ??. So a replacement for me ?
Edit : i think the force decryption was the culprit. When i rebooted, system was crashing. Op3t had its specific force decrypt file, not a general one, So i think as the development moves forward, op7 will also get it's own. Hoping the best ?
Click to expand...
Click to collapse
This file also works on OP7 pro, so it should also work on normal op7. I think the issue comes from something other.

strongst said:
This file also works on OP7 pro, so it should also work on normal op7. I think the issue comes from something other.
Click to expand...
Click to collapse
Then there must be some issue with my flashing sequence. Btw, The service centre repaired the issue and i have rooted it and using bluespark with stock rom. I'll give the zip another try later on when a new update comes. Thanks for the help

I believe the default file system is ext4, is there any benefits changing it to f2fs?

Jacckz said:
I believe the default file system is ext4, is there any benefits changing it to f2fs?
Click to expand...
Click to collapse
A good and quick overview and comparison with oneplus 7 pro https://sparrowsnews.com/2019/08/13/difference-between-f2fs-and-ext4-file-system/

Gapps installation problem - LineageOS 16 + Oneplus 7 Pro

I'm trying to install the OpenGapps package for LineageOS 16 on my new Oneplus 7 Pro, but have a problem installing it.
First I tried the "open_gapps-arm64-9.0-micro-20190827.zip" package, but it told me its the wrong platform. Is it not arm64?
Second I tried to install the "open_gapps-arm-9.0-micro-20190827.zip", but gives me an error 70, saying I do not have enough space.
Maybe someone have a solution for this?
Thanks

Try MindtheGapps. I've seen this work for some.
http://downloads.codefi.re/jdcteam/javelinanddart/gapps

oryanh said:
Try MindtheGapps. I've seen this work for some.
http://downloads.codefi.re/jdcteam/javelinanddart/gapps
Click to expand...
Click to collapse
Tried it. Still does not work.
I got it semi, but still not working. Seems like the problem is within the way the partitions getting handled. My old Oneplus 5t had a boot, recovery, system partitions. The new one includes the recovery inside the boot it seems instead.
Here's how far I am now:
1) Unlocked the phone
2) Installed TWRP
3) Install Lineage ( This overwrites the TWRP so you have to install it again )
4) Reboot straight from TWRP after flashing the Lineage... back into the Bootloader/Fastboot mode and install the TWRP again.
5) Boot back into TWRP recovery and now I'm able to install OpenGapps ARM64 version.
But after this I cant boot the OS anymore...

cbadk said:
Tried it. Still does not work.
I got it semi, but still not working. Seems like the problem is within the way the partitions getting handled. My old Oneplus 5t had a boot, recovery, system partitions. The new one includes the recovery inside the boot it seems instead.
Here's how far I am now:
1) Unlocked the phone
2) Installed TWRP
3) Install Lineage ( This overwrites the TWRP so you have to install it again )
4) Reboot straight from TWRP after flashing the Lineage... back into the Bootloader/Fastboot mode and install the TWRP again.
5) Boot back into TWRP recovery and now I'm able to install OpenGapps ARM64 version.
But after this I cant boot the OS anymore...
Click to expand...
Click to collapse
Format data in twrp then try boot again should work

liam_davenport said:
Format data in twrp then try boot again should work
Click to expand...
Click to collapse
Still no luck. Tried many things now... but here's what happens:
1) Installing the TWRP
2) Format data partition and everything else
3) Reboot back into TWRP
4) Install Lineage ( At this point I'm able to boot into Lineage just fine )
5) Trying to install Open GApps at this point gives me:
Code:
# Begin Open GApps Install Log
------------------------------------------------------------------
------------------------------------------------------------------
# End Open GApps Install Log
INSTALLATION FAILURE: This Open GApps package cannot be installed on this
device's architecture. Please download the correct version for your device.
# Begin User's gapps-config
# End User's gapps-config
It says I need to install the ARM instead of ARM64...
But if I go back into the bootloader and flash the twrp and boot back into the recovery, I'm able to install Open GApps ARM64 just fine. Seems like a weird "device's architecture" detection problem in the Open Gapps or maybe it could be the TWRP... not sure...
Also after this it will no longer boot.
Kinda weird problem....

cbadk said:
Still no luck. Tried many things now... but here's what happens:
1) Installing the TWRP
2) Format data partition and everything else
3) Reboot back into TWRP
4) Install Lineage ( At this point I'm able to boot into Lineage just fine )
5) Trying to install Open GApps at this point gives me:
Code:
# Begin Open GApps Install Log
------------------------------------------------------------------
------------------------------------------------------------------
# End Open GApps Install Log
INSTALLATION FAILURE: This Open GApps package cannot be installed on this
device's architecture. Please download the correct version for your device.
# Begin User's gapps-config
# End User's gapps-config
It says I need to install the ARM instead of ARM64...
But if I go back into the bootloader and flash the twrp and boot back into the recovery, I'm able to install Open GApps ARM64 just fine. Seems like a weird "device's architecture" detection problem in the Open Gapps or maybe it could be the TWRP... not sure...
Also after this it will no longer boot.
Kinda weird problem....
Click to expand...
Click to collapse
Don't wipe system afaik vendor LOS generates it's own, Also might be in the wrong slot make sure the slot changed when rebooting back to recovery to install gapps, I used MindTheGapps latest version from OP worked great.

liam_davenport said:
Don't wipe system afaik vendor LOS generates it's own, Also might be in the wrong slot make sure the slot changed when rebooting back to recovery to install gapps, I used MindTheGapps latest version from OP worked great.
Click to expand...
Click to collapse
Have not wiped the System and Vendor partition after I installed Lineage... It boots just fine... just not if I install Open GApps....
Tried MindTheGapps latest version, but still no luck.

Okay got it working. The problem was the A/B partition layout they have in this phone... Was not aware of this.
This article describes it pretty well: https://lineageos.org/Changelog-19/
So yeah this is what I did:
1) Boot into Bootloader/Fastboot mode
2) Flash the boot partition with fastboot flash boot twrp-3.3.1-52-guacamole-unified.img
3) Restart into TWRP - Format the data partition and clean the system partition etc.
3) Restart into recovery TWRP once more to get the data partition ready
4) Now you can transfer the lineage-16.0-20190827-nightly-guacamole-signed.zip over to memory.
5) Now flash the zip file and let it complete. This will overwrite the boot partition with TWRP and replace it with Lineage's own boot/recovery image.
6) Now reboot into Lineage's recovery. Now select Apply update > Apply from ADB and send the "MindTheGapps-9.0.0-arm64-20190615_031441.zip" file to the phone with "adb sideload MindTheGapps-9.0.0-arm64-20190615_031441.zip" - You might have to confirm the zip file....
After this is done, the phone should be ready for use.

cbadk said:
Okay got it working. The problem was the A/B partition layout they have in this phone... Was not aware of this.
This article describes it pretty well: https://lineageos.org/Changelog-19/
So yeah this is what I did:
1) Boot into Bootloader/Fastboot mode
2) Flash the boot partition with fastboot flash boot twrp-3.3.1-52-guacamole-unified.img
3) Restart into TWRP - Format the data partition and clean the system partition etc.
3) Restart into recovery TWRP once more to get the data partition ready
4) Now you can transfer the lineage-16.0-20190827-nightly-guacamole-signed.zip over to memory.
5) Now flash the zip file and let it complete. This will overwrite the boot partition with TWRP and replace it with Lineage's own boot/recovery image.
6) Now reboot into Lineage's recovery. Now select Apply update > Apply from ADB and send the "MindTheGapps-9.0.0-arm64-20190615_031441.zip" file to the phone with "adb sideload MindTheGapps-9.0.0-arm64-20190615_031441.zip" - You might have to confirm the zip file....
After this is done, the phone should be ready for use.
Click to expand...
Click to collapse
I am facing the same A/B slot problem with my Moto Z2.
After setp 5), did you let the lineage OS fist then reboot into recovery, or did you go straight to the lineage recovery?

Thank you so much for this. I finally fot it sorted. I did find that sometimes you have to ubplug the USB cable and plug it in again to be recognised, but I got it going. Goodby Google!!!!
I am using Gentoo Linux with adb to do this.

Magisk & Lineage = No wifi

Goodmorning everyone. I have a problem with magisk and lineageos 18.1
I have a xiaomi mi mix 2 unlocked
Premise: I've never had any problems with magisk and lineage until now.
I installed magisk scrupulously following the official instructions and using both the boot.img patch system and the direct installation via recovery (adb sideload & lineage recovery)
In both cases magisk appears as not installed when looking from magisk manager and the wifi stops working (the phone connects to the various networks I have tried but reveals them as without internet.)
clearing cache does nothing
resetting network connections does nothing
Updating to the latest version of the radio firmware does nothing
restore boot.img OR reinstall lineage corrects the problem
In all cases I don't get root ...
Honestly, everything is beyond my understanding .. can you help me?

Ork_77 said:
Goodmorning everyone. I have a problem with magisk and lineageos 18.1
I have a xiaomi mi mix 2 unlocked
Premise: I've never had any problems with magisk and lineage until now.
I installed magisk scrupulously following the official instructions and using both the boot.img patch system and the direct installation via recovery (adb sideload & lineage recovery)
In both cases magisk appears as not installed when looking from magisk manager and the wifi stops working (the phone connects to the various networks I have tried but reveals them as without internet.)
clearing cache does nothing
resetting network connections does nothing
Updating to the latest version of the radio firmware does nothing
restore boot.img OR reinstall lineage corrects the problem
In all cases I don't get root ...
Honestly, everything is beyond my understanding .. can you help me?
Click to expand...
Click to collapse
It seems to me like you aren't properly flashing the patched boot.img. What method are you using to flash the patched boot.img?

Droidriven said:
It seems to me like you aren't properly flashing the patched boot.img. What method are you using to flash the patched boot.img?
Click to expand...
Click to collapse
I used both the method I'm aware of
1) I install magisk manager, extract the boot.img from lineage zip, upload it to the phone, patch it with magisk manager (operation ends fine), pass the modified version back to the pc reboot the phone in recovery and install the new boot with adb (installation ends correctly).
2) I rename the magisk app as .zip and then I install it through recovery
The result is the same.
In the past (with lineage 17) i always used the second method and I lived happy and with root for years.

Ork_77 said:
I used both the method I'm aware of
1) I install magisk manager, extract the boot.img from lineage zip, upload it to the phone, patch it with magisk manager (operation ends fine), pass the modified version back to the pc reboot the phone in recovery and install the new boot with adb (installation ends correctly).
2) I rename the magisk app as .zip and then I install it through recovery
The result is the same.
In the past (with lineage 17) i always used the second method and I lived happy and with root for years.
Click to expand...
Click to collapse
Since you have TWRP, you don't need the patched boot.img.
The Magisk Manager app has the root binaries built in now, all you should need to do is a Magisk Manager flashable zip.
Read this:
The Magisk Manager APK can now be flashed from within TWRP
Magisk is now distributed as part of the Manager APK, meaning you no longer need to flash a separate ZIP file from a custom recovery.
www.xda-developers.com

...

Droidriven said:
Since you have TWRP, you don't need the patched boot.img.
The Magisk Manager app has the root binaries built in now, all you should need to do is a Magisk Manager flashable zip.
Read this:
The Magisk Manager APK can now be flashed from within TWRP
Magisk is now distributed as part of the Manager APK, meaning you no longer need to flash a separate ZIP file from a custom recovery.
www.xda-developers.com
Click to expand...
Click to collapse
Yes...this is exatcly what I did.
Method 2.

Ork_77 said:
Yes...this is exatcly what I did.
Method 2.
Click to expand...
Click to collapse
You said that you converted the apk into a flashable zip. I think you should be able to find a MagiskManager.zip that is prepackaged for you to download and flash.
Also, if you use the patched boot.img method, you should rename the patched boot.img to "boot.img", then place the boot.img in your fastboot folder on PC. Then right click inside the fastboot folder and choose the option to open a cmd terminal, then boot your device into fastboot mode, connect your device to PC, type the following command:
fastboot devices(press enter)
If it returns a serial number, you are connected. Next, type the following command:
fastboot flash boot boot.img(press enter)
This should flash the patched boot.img correctly. Then reboot the device to system and try installing the Magisk Manager apk file from your internal storage instead of flashing it as a zip in recovery. If that doesn't work, try flashing the apk as a zip in recovery, wipe cache and dalvik cache after flashing the zip(DO NOT FACTORY RESET OR FORMAT ANYTHING), then reboot to system and see if it works correctly.

Droidriven said:
You said that you converted the apk into a flashable zip. I think you should be able to find a MagiskManager.zip that is prepackaged for you to download and flash.
Also, if you use the patched boot.img method, you should rename the patched boot.img to "boot.img", then place the boot.img in your fastboot folder on PC. Then right click inside the fastboot folder and choose the option to open a cmd terminal, then boot your device into fastboot mode, connect your device to PC, type the following command:
fastboot devices(press enter)
If it returns a serial number, you are connected. Next, type the following command:
fastboot flash boot boot.img(press enter)
This should flash the patched boot.img correctly. Then reboot the device to system and try installing the Magisk Manager apk file from your internal storage instead of flashing it as a zip in recovery. If that doesn't work, try flashing the apk as a zip in recovery, wipe cache and dalvik cache after flashing the zip(DO NOT FACTORY RESET OR FORMAT ANYTHING), then reboot to system and see if it works correctly.
Click to expand...
Click to collapse
Hi Droidriven, thank you for your answers. Perhaps, synthesizing my steps too much, I gave the impression of not being particularly capable in computer science (you even tell me to press "enter" after commands ...). Well, let's say it's not my case.
All steps are performed correctly.
all steps end without errors.
No matter what I do, in the end Magisk appears as n / a, I don't have root, and the data connection doesn't work. Small addition about the latter aspect: when rebooting the wifi connection works for a variable time between 10 and 20 seconds, after which the network appears as without internet (or intranet) but the phone remains connected.
At the reboot, history repeats itself
Restoring the original boot everything returns to normal.

OP7Pro not recognized by Windows in FastBoot mode

Phone OS: OxygenOS 11 EU
PC OS: Windows 11 x64
I'm trying to unlock the bootloader so that I could debloat my phone, install some magisk modules, and GCam.
While ADB normally sees my phone without issues, it's not recognized in Fastboot mode. In the Devices Manager window, the phone is shown as a generic Android device with the yellow warning sign (only during Fastboot, correctly detected as OP7Pro otherwise).
I tried installing ADB from multiple sources, and even used mauronofrio's Tool All In One to no avail. The guides to unlock bootloader don't make any mentions of this issue, and online I've only managed to find very old unsolved threads for other phones.

So, your system doesn't recognize the phone in fastboot mode ?
Did you tried to uninstall the device in the device manager, then plug it back ?

draentor said:
So, your system doesn't recognize the phone in fastboot mode ?
Did you tried to uninstall the device in the device manager, then plug it back ?
Click to expand...
Click to collapse
Good news, not sure why but today it was recognized, and installing TWRP and Magisk seemed to go smoothly.
I now have another question: this post (from 2019) mentions that I should've not installed Magisk the way I did.
I did the following:
1. unlock bootloader via Tool All In One
2. update OxygenOS via the notification I received, then reboot
3. install TWRP via Tool All In One
4. install Magisk via the TWRP menu and app (using the recommended choice)
What instead the guide says is: after TWRP and Magisk installed, update without rebooting, then install TWRP A/B Retention Script, then install Magisk to Inactive Slot and not the recommended Direct Install.
Could I have issues of any kinds, maybe update related, with these premises? If yes, what can I do to fix them?

Nevermind, phone's dead now. I will open another thread about it.

I think this guide is outdated.
That's what worked for me (Read everything before beginning) :
Unlock the bootloader
Update to the last OxygenOS version
Use Oxygen Updater app to be really up-to-date
Install TWRP
To do so, get the latest TWRP .img file here : https://twrp.me/oneplus/oneplus7pro.html
Get the latest twrp-installer.zip file too
It's ready for Android 11, maybe Android 12, I didn't tried
Don't forget to check "Developer options" in system settings
With your phone plugged in your computer, use adb commands and reboot to fastboot with "adb reboot bootloader"
Then, load TWRP with "fastboot boot twrp.img". Of course, you need to put the latest TWRP image file previously downloaded in the same folder and rename it "twrp.img"
In TWRP, go to Advanced then press "Flash Current TWRP"
Done !
Then, follow those instructions :
Wipe -> Factory Reset + : Wipe Data, System, Cache and Dalvik Cache
Install -> Flash ROM : Use the install function and install the ROM
Install -> Flash TWRP Installer : Don't reboot, go back and install as the previous step
Reboot -> Recovery : Reboot TWRP and it automatically load the other slot
Wipe -> Format Data : Click and type yes
Reboot -> System : Just reboot and it should load the installed ROM
Reboot to recovery
Install -> Magisk
Reboot -> System
Install -> Whathever you want
Reboot -> System

draentor said:
I think this guide is outdated.
That's what worked for me (Read everything before beginning) :
Unlock the bootloader
Update to the last OxygenOS version
Use Oxygen Updater app to be really up-to-date
Install TWRP
To do so, get the latest TWRP .img file here : https://twrp.me/oneplus/oneplus7pro.html
Get the latest twrp-installer.zip file too
It's ready for Android 11, maybe Android 12, I didn't tried
Don't forget to check "Developer options" in system settings
With your phone plugged in your computer, use adb commands and reboot to fastboot with "adb reboot bootloader"
Then, load TWRP with "fastboot boot twrp.img". Of course, you need to put the latest TWRP image file previously downloaded in the same folder and rename it "twrp.img"
In TWRP, go to Advanced then press "Flash Current TWRP"
Done !
Then, follow those instructions :
Wipe -> Factory Reset + : Wipe Data, System, Cache and Dalvik Cache
Install -> Flash ROM : Use the install function and install the ROM
Install -> Flash TWRP Installer : Don't reboot, go back and install as the previous step
Reboot -> Recovery : Reboot TWRP and it automatically load the other slot
Wipe -> Format Data : Click and type yes
Reboot -> System : Just reboot and it should load the installed ROM
Reboot to recovery
Install -> Magisk
Reboot -> System
Install -> Whathever you want
Reboot -> System
Click to expand...
Click to collapse
Thanks, I'll save it for next time. Unfortunately the phone's dead and I'm not sure how I got there, nor how or if I can recover it. I made a thread here https://forum.xda-developers.com/t/op7pro-dead-black-screen-wont-turn-on.4387537/