Related
Please help
I bricked my OP7 Pro , i unlocked it , and install recovery normally
then i tried to install Havac OS , and when i am in TWRP , i did restart to recovery , but the phone stuck in fastboot
what i did so far , i installed fastboot rom 10.0 , do flash all.bat but it keep stuck on fastboot
i am not sure on what version of OS i was.
can any one help me ?
You should be able to recover from this by using the MSM tool. Download that and make sure you follow instructions on installing the correct USB driver. You'll boot the phone with VolUP/VolDN pressed while you connect the phone to a computer and the MSM tool should be able to wipe and put software back on.
fastboot versions are beta's. Check these links.
https://forum.xda-developers.com/oneplus-7-pro/how-to/guide-mega-unbrick-guide-hard-bricked-t3934659
Use this link for Root tools.
https://forum.xda-developers.com/on...pro-roms-kernels-recoverys-firmwares-t3931126
Downgrade tool if you're not happy on Q.
https://techbeasts.com/downgrade-android-q-dp-to-android-pie-on-oneplus-7-pro/
blas4me said:
fastboot versions are beta's. Check these links.
https://forum.xda-developers.com/oneplus-7-pro/how-to/guide-mega-unbrick-guide-hard-bricked-t3934659
Use this link for Root tools.
https://forum.xda-developers.com/on...pro-roms-kernels-recoverys-firmwares-t3931126
Downgrade tool if you're not happy on Q.
https://techbeasts.com/downgrade-android-q-dp-to-android-pie-on-oneplus-7-pro/
Click to expand...
Click to collapse
Nic2112 said:
You should be able to recover from this by using the MSM tool. Download that and make sure you follow instructions on installing the correct USB driver. You'll boot the phone with VolUP/VolDN pressed while you connect the phone to a computer and the MSM tool should be able to wipe and put software back on.
Click to expand...
Click to collapse
Thanks , From where i can download MSM tool ? can you help me to find the thread ?
also what the steps please ? i am newbie
fixed ,
i followed this link
https://forum.xda-developers.com/oneplus-7-pro/how-to/msm-tool-guac-t3934691
new_world_2006 said:
fixed ,
i followed this link
https://forum.xda-developers.com/oneplus-7-pro/how-to/msm-tool-guac-t3934691
Click to expand...
Click to collapse
it's all the same crew.
Original Stock PRELOADER_MERLIN.BIN for MERLIN
Works with:
- Xiaomi Redmi 10X 4G
- Xiaomi Redmi Note 9
Firmware Versions:
- (Engineering) AL2522-Merlin-V039-Q-0513
- (Engineering) AL2522-Merlin-V044-Q-0920
- V12.5.1.0.RJOMIXM (FLASHING EDL only.)
- V12.0.1.0.RJOMIXM (FLASHING EDL only.)
- V12.0.8.0.QJOMIXM (FLASHING EDL only.)
- V12.0.7.0.QJOMIXM (FLASHING EDL only.)
- V12.0.6.0.QJOMIXM (FLASHING EDL only.)
- V12.0.5.0.QJOMIXM (FLASHING EDL only.)
- V12.0.4.0.QJOMIXM
- (China) V12.0.4.0.QJOCNXM
- V12.0.3.0.QJOMIXM
- V11.0.5.0.QJOMIXM
- V11.0.4.0.QJOMIXM
- V11.0.2.0.QJOMIXM
How to flash it?
Code:
fastboot flash preloader preloader_merlin.bin
MD5 hashes:
AL2522-Merlin-V039-Q-0513: bc7ebc0c2ca06b0d99856d595949e215
AL2522-Merlin-V044-Q-0920: d2c78e614adf75b98b2b6de74dfb4675
V12.5.1.0.RJOMIXM: 5db0756e0c2c0af508e5a823f204a6f1
V12.0.1.0.RJOMIXM: 1871c0dc6d8de2060175f8c90b133012
V12.0.8.0.QJOMIXM: d9a5ed36161265b61176178bebed8281
V12.0.7.0.QJOMIXM: 2124bb907077b745b8ada8d7108802f9
V12.0.6.0.QJOMIXM: 8c5d38f293d1609da6f79aa7d43b5c0b
V12.0.5.0.QJOMIXM: 27349a358cfd49f73ed3d31d423ca7fd
V12.0.4.0.QJOMIXM: 61ec78ae4a096c0b9f46cf814e5988c3
(China) V12.0.4.0.QJOCNXM: d06b365a15bc622327772586d3c54b18
V12.0.3.0.QJOMIXM: 9a14afee8301b12848ff8ec56c5aebbf
V11.0.5.0.QJOMIXM: 6fb0758e03bf1e43794f5a5273b627b8
V11.0.4.0.QJOMIXM: ea0e773af461a339b76907f94eff73c9
V11.0.2.0.QJOMIXM: d7d5c5b53817b4cc62accfe0eb0cabe3
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/
My device is on China version 12.0.8, will I get bricked if I flash preload 12.0.4 Global?
p233 said:
My device is on China version 12.0.8, will I get bricked if I flash preload 12.0.4 Global?
Click to expand...
Click to collapse
No.
It will works perfectly.
I've attached preloader of V12.0.4.0.QJOCNXM (China) too.
Enjoy
How do i flash is in EDL mode, what should i use because i am at miui 12.5 and i dont know how to make this into edl mode and flash it there
briangwapo81 said:
How do i flash is in EDL mode, what should i use because i am at miui 12.5 and i dont know how to make this into edl mode and flash it there
Click to expand...
Click to collapse
You can't. If you are at MIUI V12.0.5.0 or higher, ou need to flash in fastboot.
For EDL you need an authorized account for use EDL.
You need to go the service centre for professional assistance.
Read it: https://www.xda-developers.com/xiaomi-edl-unbrick-authorized-mi-accounts/
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/
VD171 said:
You can't. If you are at MIUI V12.0.5.0 or higher, ou need to flash in fastboot.
For EDL you need an authorized account for use EDL.
You need to go the service centre for professional assistance.
Read it: https://www.xda-developers.com/xiaomi-edl-unbrick-authorized-mi-accounts/
Click to expand...
Click to collapse
I made the way of VD171 and succeeded. Furthermore I can switch back to MIUI 11.0.5 Global. However, when I was in version 11.0.5, I installed TWRP, but Root didn't work.
p233 said:
I made the way of VD171 and succeeded. Furthermore I can switch back to MIUI 11.0.5 Global. However, when I was in version 11.0.5, I installed TWRP, but Root didn't work.
Click to expand...
Click to collapse
Here, you can see what is working for MERLIN: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4209269/
As you can see, MAGISK is working perfectly on V11.0.5.0.
Did you flash magisk using TWRP or did you flash magisk patched boot.img ?
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/
VD171 said:
Here, you can see what is working for MERLIN: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4209269/
As you can see, MAGISK is working perfectly on V11.0.5.0.
Did you flash magisk using TWRP or did you flash magisk patched boot.img ?
Click to expand...
Click to collapse
I flash magisk using TWRP.
p233 said:
I flash magisk using TWRP.
Click to expand...
Click to collapse
Try patching boot.img using magisk manager.
And then, flashing the magisk patched boot.img to boot partition.
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/
Good afternoon! I flashed my RN 9 with the version merlin_global_images_V12.0.1.0.RJOMIXM. Then I flashed LK from lk-V12.0.4.0.QJOMIXM. The result is this: the phone is loaded only in EDL mode. Now only carry it to the service center?
Gardlok said:
Good afternoon! I flashed my RN 9 with the version merlin_global_images_V12.0.1.0.RJOMIXM. Then I flashed LK from lk-V12.0.4.0.QJOMIXM. The result is this: the phone is loaded only in EDL mode. Now only carry it to the service center?
Click to expand...
Click to collapse
Just bypass the EDL authentication and flash the LK-V12.0.1.0.RJOMIXM.
I suggest you to flash the preloader-V12.0.4.0.QJOMIXM and then, you can flash in download mode and avoid the EDL authentication.
VD171 said:
Just bypass the EDL authentication and flash the LK-V12.0.1.0.RJOMIXM.
I suggest you to flash the preloader-V12.0.4.0.QJOMIXM and then, you can flash in download mode and avoid the EDL authentication.
Click to expand...
Click to collapse
After loading the DA, after 60 seconds (timeout), it returns an error: Error: "EXCEPTION STATUS_EXT_RAM_EXCEPTION". I am 100% sure that I did not click "format all". I have successfully bypassed authentication. I saw your post, it said that preloader_merlin-V12.0.1.0.RJOMIXM cannot load DA...
Gardlok said:
After loading the DA, after 60 seconds (timeout), it returns an error: Error: "EXCEPTION STATUS_EXT_RAM_EXCEPTION". I am 100% sure that I did not click "format all". I have successfully bypassed authentication. I saw your post, it said that preloader_merlin-V12.0.1.0.RJOMIXM cannot load DA...
Click to expand...
Click to collapse
You need to flash using the firmware upgrade mode, it will erase userdata and relock bootloader.
And then, you can restore your backup.
VD171 said:
You need to flash using the firmware upgrade mode, it will erase userdata and relock bootloader.
And then, you can restore your backup.
Click to expand...
Click to collapse
The switched-off phone is not detected by the computer in any way, only EDL mode is possible, I tried to flash in the "Firmware upgrade" mode, the error is the same...
Gardlok said:
The switched-off phone is not detected by the computer in any way, only EDL mode is possible, I tried to flash in the "Firmware upgrade" mode, the error is the same...
Click to expand...
Click to collapse
May you attach the screenshot, please?
VD171 said:
May you attach the screenshot, please?
Click to expand...
Click to collapse
Ok. In the settings, I put UART, 921600.
Gardlok said:
Ok. In the settings, I put UART, 921600.
Click to expand...
Click to collapse
The good news: your device is okay, just need some attention.
The bad news: you really need to do more tests.
Did you try another older MIUI version?
VD171 said:
The good news: your device is okay, just need some attention.
The bad news: you really need to do more tests.
Did you try another older MIUI version?
Click to expand...
Click to collapse
Yes, I tried it. I have tried many different versions of the firmware, both for Russia and for the whole world. I also tried the engineering firmware. I also tried to install various drivers, SPFT. I was booting using Live WinPE. Conclusion: there is always an error that is described above. I think the phone's memory has switched to read-only mode. My phone is under warranty, I will take it to the service... I was upset... eh...
Gardlok said:
Yes, I tried it. I have tried many different versions of the firmware, both for Russia and for the whole world. I also tried the engineering firmware. I also tried to install various drivers, SPFT. I was booting using Live WinPE. Conclusion: there is always an error that is described above. I think the phone's memory has switched to read-only mode. My phone is under warranty, I will take it to the service... I was upset... eh...
Click to expand...
Click to collapse
You just applied some change to the device, causing some brick.
SP Flash Tool is your best friend, certainly it can solve your problems.
Please help me, my phone comes with miui 12.5.X, I have unlocked the bootloader with "MediatekBootloaderUnlock" and I can use "MTK-bypas" to flash it using SP - TOOL, apparently the flashing is always successful, however the system won't boot , it only shows the android logo and I can't access the recovery menu, only fastboot. I tried with MIU 13, MIU 12.5.3 with the same results.
In the end I tried with MIU 12.0.1 (merlin_global_images_V12.0.1.0.RJOMIXM_20210520.0000.00_11.0_global):
1- Use EDL bypass and SPFLASH, it was successful, because fastboot now shows a different logo, but the system does not start and I cannot access the recovery menu either.
2- Use Mediatek Bootloader Unlock
3- Start fastboot and use: "fastboot flash preloader preloader_merlin--V12.0.1.0.RJOMIXM.bin" with apparent success.
4- I go back to SP-Flash and try to flash again MIU 12.0.1 (in theory it should no longer need EDL bypass), uncheck "preloader", I press download and connect my phone and it starts to turn itself on, if I press a key then I receive the authentication error.
If someone could give me a better guide on what to do, I would greatly appreciate it. I have tried formatting using SP-Flash and tried to flash by changing the preloader from "merlin_global_images_V12.0.1.0.RJOMIXM_20210520.0000.00_11.0_global" to "preloader_merlin--V12.0.1.0.RJOMIXM.bin", using "DA_VD171--3.3001 .2020-07-02020-07-14.bin" and "MT6768_Android_scatter--V12.0.1.0.RJOMIXM.txt" but I get the error, the screenshot is from this attempt.
Please help me
I upgraded my OnePlus 9 LE2115 from OOS 11 to OOS 12, and every time the phone reboots after completing the update, the touch screen is completely unresponsive, so it stays stuck at the lock screen forever.
I upgraded from OOS 11.2.10.10 to OOS 12-C36. I understand that I need to get to C36 before upgrading to C40.
Here are the steps I tried:
1. Downloaded C36 full upgrade zip and placed on root of internal storage.
2. Started local upgrade with this file.
3. System rebooted and touch screen won't work at all.
I also tried it through Fastboot:
1. Downloaded C36 full upgrade zip and extracted all images from payload.bin.
2. Followed all fastboot command steps from this post.
3. Rebooted to system and touch screen still won't work.
Only option I have is to downgrade to OOS 11 with the downgrade zip.
Anyone have any suggestions?
Sometimes a downgrade is an upgrade... better get while the getting's good.
I was having the same issue until I MSM'd back to stock 11.2.2.4 and relocked the bootloader. Then I upgraded through the system update menu normally. I just unlocked the bootloader once I was fully upgraded to Android 12. Hopefully it'll be there same for you
jshinn1 said:
I was having the same issue until I MSM'd back to stock 11.2.2.4 and relocked the bootloader. Then I upgraded through the system update menu normally. I just unlocked the bootloader once I was fully upgraded to Android 12. Hopefully it'll be there same for you
Click to expand...
Click to collapse
Thanks for responding.
Which MSM tool did you use?
TikiThePug said:
Thanks for responding.
Which MSM tool did you use?
Click to expand...
Click to collapse
I initially used the 9 Pro Indian MSM tool,, but Ive been using the Global MSM with no issues recently, I was finally able to get the Global MSM working consistently by disable the "Auto-reboot" and "SHA-256 check" options and also selecting "O2" as the "Target"
Try this Msm tool
Global/US unbricking guide.
Global/US OnePlus 9 Unbricking Guide Tested and used on a LE2115 variant device. YOU SHOULDN'T USE THIS GUIDE UNLESS YOU ARE ABSOLUTELY SURE YOUR PHONE IS BRICKED. PLEASE TRY POWER COMBOS FIRST! THERE ARE NO GUARANTEES, AND THIS SHOULD BE A LAST...
forum.xda-developers.com
jshinn1 said:
I initially used the 9 Pro Indian MSM tool,, but Ive been using the Global MSM with no issues recently, I was finally able to get the Global MSM working consistently by disable the "Auto-reboot" and "SHA-256 check" options and also selecting "O2" as the "Target"
Click to expand...
Click to collapse
badreddine uday said:
Try this Msm tool
Global/US unbricking guide.
Global/US OnePlus 9 Unbricking Guide Tested and used on a LE2115 variant device. YOU SHOULDN'T USE THIS GUIDE UNLESS YOU ARE ABSOLUTELY SURE YOUR PHONE IS BRICKED. PLEASE TRY POWER COMBOS FIRST! THERE ARE NO GUARANTEES, AND THIS SHOULD BE A LAST...
forum.xda-developers.com
Click to expand...
Click to collapse
Thanks, I am trying this but keep getting Saraha Communication failed. I have tried multiple cables and ports and still the same issue.. it always seems the Global MSM tool does this for me, but the OP9 Pro Indian tool does not. I can restore it to the Indian variant, but I do not know how to update to the correct OOS 12 version for Global variant after that, without unlocking the bootloader.
TikiThePug said:
Thanks, I am trying this but keep getting Saraha Communication failed. I have tried multiple cables and ports and still the same issue.. it always seems the Global MSM tool does this for me, but the OP9 Pro Indian tool does not. I can restore it to the Indian variant, but I do not know how to update to the correct OOS 12 version for Global variant after that, without unlocking the bootloader.
Click to expand...
Click to collapse
Well i tried both of 9 and pro i got succed . About 9 proi i had to intall magisk root for oxygen updater apk i gave it the permissions then i choose the full global os 12 then wipe the data and have a fun. About sahara failed tru to uninstal drivers then reboot pc and instal it again i mean qualcom snapdragon usb drivers. I think you should desactive the antivirus protection and choose os on msm tool . Dont give up dude .
TikiThePug said:
Thanks, I am trying this but keep getting Saraha Communication failed. I have tried multiple cables and ports and still the same issue.. it always seems the Global MSM tool does this for me, but the OP9 Pro Indian tool does not. I can restore it to the Indian variant, but I do not know how to update to the correct OOS 12 version for Global variant after that, without unlocking the bootloader.
Click to expand...
Click to collapse
Read this it may help you a lot
How to Unbrick OnePlus 9/9 Pro/9R using MSM Download Tool
In this guide, we will show you the steps to unbrick the OnePlus 9/9 Pro/9R devices using MSM Download Tool.
www.droidwin.com
OK, I can get rid of the communication failed message by holding power+volume up for a few seconds, but now when I disable the "Auto-reboot" and "SHA-256 check" options and also select "O2" as the "Target", I see "Start Download Firehose Binary" for 18 seconds, then I get the Sahara Communication failed again. I tried doing the same steps but selecting "Use Lite Firehose" only, and I get stuck at "Param preload" with "Device not match image".
TikiThePug said:
OK, I can get rid of the communication failed message by holding power+volume up for a few seconds, but now when I disable the "Auto-reboot" and "SHA-256 check" options and also select "O2" as the "Target", I see "Start Download Firehose Binary" for 18 seconds, then I get the Sahara Communication failed again. I tried doing the same steps but selecting "Use Lite Firehose" only, and I get stuck at "Param preload" with "Device not match image".
Click to expand...
Click to collapse
Here follow this guide which showed me how to get back to Global firmware after flashing the Indian MSM tool: https://www.droidwin.com/msm-tool-unable-to-recognize-oneplus-9-sahara-connection-error/
CHeck under the FAQ section titled "FAQ: Switch From OnePlus 9 Pro to OnePlus 9 Firmware". That should at least get you back to stock firmware for your region and then you can update from there before unclocking the bootloader
Thanks guys, I got it all working now.
Here's what I had to do:
1. Get both OP9 Global and OP9 Pro India MSM packages.
2. Decrypt both OPS files using this tool: https://github.com/bkerler/oppo_decrypt
3. Open settings.xml in OP9 Pro India extract folder, and copy header and footer from there to the settings.xml file of the OP9 Global extract folderm. Steps described here: https://forum.xda-developers.com/t/global-us-unbricking-guide.4370463/page-2#post-86155365
4. Repack the firmware to a new OPS file and copy this to the MSM main folder. Also move all other OPS files out of this folder.
5. Launch MSM tool and put phone in EDL mode -> flash by choosing Auto Reboot and Firehose Lite opens checked.
6. Phone rebooted to OOS 11 Global. Updated to OOS 12 C36 through System Update.
7. Reboot system to OOS 12 with touchscreen ACTUALLY WORKING. Updated to C40 through System Update.
8. Reboot system to C40 with everything still working.
9. Reboot to fastboot and unlocked bootloader. Rebooted and finished.
TikiThePug said:
OK, I can get rid of the communication failed message by holding power+volume up for a few seconds, but now when I disable the "Auto-reboot" and "SHA-256 check" options and also select "O2" as the "Target", I see "Start Download Firehose Binary" for 18 seconds, then I get the Sahara Communication failed again. I tried doing the same steps but selecting "Use Lite Firehose" only, and I get stuck at "Param preload" with "Device not match image".
Click to expand...
Click to collapse
I had same issues well try the 9 pro msm with previous steps
TikiThePug said:
Thanks guys, I got it all working now.
Here's what I had to do:
1. Get both OP9 Global and OP9 Pro India MSM packages.
2. Decrypt both OPS files using this tool: https://github.com/bkerler/oppo_decrypt
3. Open settings.xml in OP9 Pro India extract folder, and copy header and footer from there to the settings.xml file of the OP9 Global extract folderm. Steps described here: https://forum.xda-developers.com/t/global-us-unbricking-guide.4370463/page-2#post-86155365
4. Repack the firmware to a new OPS file and copy this to the MSM main folder. Also remove all other OPS files.
5. Launch MSM tool and put phone in EDL mode -> flash by choosing Auto Reboot and Firehose Lite opens checked.
6. Phone rebooted to OOS 11 Global. Updated to OOS 12 C36 through System Update.
7. Reboot system to OOS 12 with touchscreen ACTUALLY WORKING. Updated to C40 through System Update.
8. Reboot system to C40 with everything still working.
9. Reboot to fastboot and unlocked bootloader. Rebooted and finished.
Click to expand...
Click to collapse
I told you . Happy for you dude good work. It needs little patience
TikiThePug said:
Thanks guys, I got it all working now.
Here's what I had to do:
1. Get both OP9 Global and OP9 Pro India MSM packages.
2. Decrypt both OPS files using this tool: https://github.com/bkerler/oppo_decrypt
3. Open settings.xml in OP9 Pro India extract folder, and copy header and footer from there to the settings.xml file of the OP9 Global extract folderm. Steps described here: https://forum.xda-developers.com/t/global-us-unbricking-guide.4370463/page-2#post-86155365
4. Repack the firmware to a new OPS file and copy this to the MSM main folder. Also remove all other OPS files.
5. Launch MSM tool and put phone in EDL mode -> flash by choosing Auto Reboot and Firehose Lite opens checked.
6. Phone rebooted to OOS 11 Global. Updated to OOS 12 C36 through System Update.
7. Reboot system to OOS 12 with touchscreen ACTUALLY WORKING. Updated to C40 through System Update.
8. Reboot system to C40 with everything still working.
9. Reboot to fastboot and unlocked bootloader. Rebooted and finished.
Click to expand...
Click to collapse
Awesome! Happy you got it working I think we've all been at this point with this phone. I like it but this might be my last OnePlus phone
jshinn1 said:
Awesome! Happy you got it working I think we've all been at this point with this phone. I like it but this might be my last OnePlus phone
Click to expand...
Click to collapse
Hi, i have a same problem with my LE2110, but it's possible you share your package modified with a good .xml please ?
coolporteur84 said:
Hi, i have a same problem with my LE2110, but it's possible you share your package modified with a good .xml please ?
Click to expand...
Click to collapse
Sorry it was @TikiThePug that posted about that I never used that method on my device
jshinn1 said:
Sorry it was @TikiThePug that posted about that I never used that method on my device
Click to expand...
Click to collapse
OK i'm sorry, I thought you also used this method.
TikiThePug said:
Thanks guys, I got it all working now.
Here's what I had to do:
1. Get both OP9 Global and OP9 Pro India MSM packages.
2. Decrypt both OPS files using this tool: https://github.com/bkerler/oppo_decrypt
3. Open settings.xml in OP9 Pro India extract folder, and copy header and footer from there to the settings.xml file of the OP9 Global extract folderm. Steps described here: https://forum.xda-developers.com/t/global-us-unbricking-guide.4370463/page-2#post-86155365
4. Repack the firmware to a new OPS file and copy this to the MSM main folder. Also move all other OPS files out of this folder.
5. Launch MSM tool and put phone in EDL mode -> flash by choosing Auto Reboot and Firehose Lite opens checked.
6. Phone rebooted to OOS 11 Global. Updated to OOS 12 C36 through System Update.
7. Reboot system to OOS 12 with touchscreen ACTUALLY WORKING. Updated to C40 through System Update.
8. Reboot system to C40 with everything still working.
9. Reboot to fastboot and unlocked bootloader. Rebooted and finished.
Click to expand...
Click to collapse
Hi, Could you share the finished package with the modified .XML ?
coolporteur84 said:
Hi, Could you share the finished package with the modified .XML ?
Click to expand...
Click to collapse
You can get it from here: https://easyupload.io/8aafk2
Link will expire in 6 days.
TikiThePug said:
You can get it from here: https://easyupload.io/8aafk2
Link will expire in 6 days.
Click to expand...
Click to collapse
Thank you very much !!! I'm trying this evening.
Hello,
My oneplus 9 boots into fastboot, I can use fastboot on my pc but when I try to flash twrp (fastboot boot twrp.img) it tells me FAILED (command write failed (Unknown error)) I don't know what to do
Fastboot flash recovery is correct process to flash twrp
Simple go to oneplus recovery wipe cache your good to go all user apps removed and data will retains
you can run the MSM Tool also. Or, try and boot into Lineage recovery or TWRP, if fastboot flash recovery doesnt work, just do fastboot boot recovery.img
Venkata Prathap said:
Fastboot flash recovery is correct process to flash twrp
Simple go to oneplus recovery wipe cache your good to go all user apps removed and data will retains
Click to expand...
Click to collapse
It gave the same error
illusiveairforce said:
you can run the MSM Tool also. Or, try and boot into Lineage recovery or TWRP, if fastboot flash recovery doesnt work, just do fastboot boot recovery.img
Click to expand...
Click to collapse
I wanted to install it, but it is hosted on google drive and when downloading it blocked me saying it has viruses. Please send me a mirror.
Also I can't access my phone using fastboot anymore, fastboot devices gives nothing, it however shows up in device manager.
I just put a link on a different thread one sec
ONEPLUS 9 china unbrick
ONEPLUS 9 china unbrick what i must to do to bypass model id and flash device
forum.xda-developers.com
Password: cn1d
illusiveairforce said:
ONEPLUS 9 china unbrick
ONEPLUS 9 china unbrick what i must to do to bypass model id and flash device
forum.xda-developers.com
Password: cn1d
Click to expand...
Click to collapse
Isn't that only for the China version? Mine is eu
fastboot works again, it was a driver issue. doing
fastboot boot twrp.img : FAILED (remote: 'Failed to load/authenticate boot image: Load Error')
fastboot flash recovery twrp.img : FAILED (remote: '(recovery_a) No such partition')
illusiveairforce said:
ONEPLUS 9 china unbrick
ONEPLUS 9 china unbrick what i must to do to bypass model id and flash device
forum.xda-developers.com
Password: cn1d
Click to expand...
Click to collapse
Using this, after 6s it said an error talking about O2 (don't remember exactly) and now it says sahara communicatino failed.
It says "Unsupported target O2".
If your partition system is dead (slot A not found when booting on recovery), only MSM tool can help you at this stage. But for OP9 this is a pain in ass to use it; I never used it before but there is multiple topic for using the right version, and as I read it can pass by MSM for pro version first before returning to non pro
I let my phone charge this night as it had no battery, and now It just does nothing, doesn't get into fastboot, when plugged to pc it says USB device not recognized, and pressing volume up + volume down doesn't get the phone into EDL.
akboy7015 said:
If your partition system is dead (slot A not found when booting on recovery), only MSM tool can help you at this stage. But for OP9 this is a pain in ass to use it; I never used it before but there is multiple topic for using the right version, and as I read it can pass by MSM for pro version first before returning to non pro
Click to expand...
Click to collapse
Okay got myself back into EDL. Using the oneplus 9 pro MSM tool from there https://forum.xda-developers.com/t/op9pro-repository-of-msm-unbrick-tools-tmo-eu-glo-in.4272549/
It said "Device not match image"
After trying 5 differennt MSM Tool one of them worked and my phone is back to stock. Thank you all !
magalie78 said:
After trying 5 differennt MSM Tool one of them worked and my phone is back to stock. Thank you all !
Click to expand...
Click to collapse
Witch one ? It could be useful for someone else
I have bricked this device (One Plus Nord CE 2 Lite) by flashing the unofficial twrp image for this device. Device bootloops in TWRP.
Previously, I had succesfully unlocked the bootloader and rooted this device by flashing the patched magisk boot.img by following the method mentioned in this post (https://forum.xda-developers.com/t/rooting-oneplus-nord-2-ce-lite.4500297/)
How to restore the factory image and recover from this?
Any help is appreciated.
Thanks
...reboot to fastboot, flash the original boot and vbmeta and you're done ...maybe you have to change back the slot, but it's almost impossible to brick the device
...don't mess around with "Recovery" ...this device has already the newest partitioning system and there is no recovery partition
best regards
I messed up by flashing the wrong twrp image made. (Device was stuck on 1+ logo screen)
Thanks to your post i was able to rescue this device.
I used Oxygen Updater App, payload-dumper-gui and minimal adb fastboot.
Flashed boot and vbmeta with stock img files.
Restarting the device now will boot into fastboot mode.
Changing slots helped a lot.
(fastboot set-active=a/b)
After that, Device booted normally into OS.
... you're very welcome, Sir ...but really, don't mess around with "old school" recovery systems ...they are not needed anymore and furthermore they can't handle the "dynamic super partitioning" ...and again: nobody needs them after the year 2015 anymore
...best regards
NickR01 said:
I messed up by flashing the wrong twrp image made. (Device was stuck on 1+ logo screen)
Thanks to your post i was able to rescue this device.
I used Oxygen Updater App, payload-dumper-gui and minimal adb fastboot.
Flashed boot and vbmeta with stock img files.
Restarting the device now will boot into fastboot mode.
Changing slots helped a lot.
(fastboot set-active=a/b)
After that, Device booted normally into OS.
Click to expand...
Click to collapse
Hey can you help me pls, I am in the exact same situation as you but I can't get the stock img files, whenever I use payload-dumper it just gives me system.img and nothing else, could you maybe share your img files ?
Edit: I manged to get some files but still not the boot.img, I don't undestand why it just refuses to give them to me, I redownloaded everything at least 3 times...
Use Payload-Dumper-GUI instead of Payload-Dumper-Go
Hey @NickR01 if possible can you send me an boot.img and vbmeta
I don’t have windows pc so can’t use Payload-Dumper
It will also help future users to unbrick device.
NickR01 said:
Use Payload-Dumper-GUI instead of Payload-Dumper-Go
Click to expand...
Click to collapse
@vikas_anakin What's your device version?
cph2381 cph2409
NickR01 said:
@vikas_anakin What's your device version?
cph2381 cph2409
Click to expand...
Click to collapse
cph2381
@vikas_anakin I have files for eu variant, can't help you there bud. If flashed it can mess up your device.
If you are stuck with payload.bin extraction... try it with an android device.
Here's the tool for Android.
Payload-Dumper-Android
Here's the guide for it.
XDA Guide
Newb Guide
Follow the guide and download this app to extract the .bin file
Termux App: Termux Github
After the extraction, type fastboot (pc required) commands to flash and change current active slots from A to B if it's stuck in bootloop after flashing.
I hope this helps you recover your device.
NickR01 said:
@vikas_anakin I have files for eu variant, can't help you there bud. If flashed it can mess up your device.
If you are stuck with payload.bin extraction... try it with an android device.
Here's the tool for Android.
Payload-Dumper-Android
Here's the guide for it.
XDA Guide
Newb Guide
Follow the guide and download this app to extract the .bin file
Termux App: Termux Github
After the extraction, type fastboot (pc required) commands to flash and change current active slots from A to B if it's stuck in bootloop after flashing.
I hope this helps you recover your device.
Click to expand...
Click to collapse
Extracting the payload.bin is not an issue, The issue is I don't have stock firmware.
I used https://www.getdroidtips.com/oneplus-nord-ce-2-lite-5g-firmware-flash-file/ but my wifi and Bluetooth are not working after installing it.
Do you have any suggestions on how can i resolve these issues?
@vikas_anakin Download authentic firmware from this app. Files are pulled from OnePlus servers.
Google Playstore: Oxygen Updater
Oxygen Updater Settings -> Enable Advanced Mode
Select device region.
Latest update for holi is CPH2381_11_A.13 as of now.
I extracted the images from the payload.bin found in the Oxygen Updater file (that I had actually successfully used to update my device) and flashed 2 partitions:
fastboot flash vbmeta vbmeta.img
fastboot flash boot boot.img
I then rebooted and now it's stuck in a boot loop & I can't even access fastboot anymore. Can someone please help?
Thanks
EDIT:
I managed to access fastboot & flash the rest of the partitions to fix it.
Hi everyone, just to piggy back on this thread, I also have the same device, and I have unofficial twrp and boot loader unlocked, however I have no back up rom and just want to get the phone back to normal really. Ive been following guides all over the place, but could someone point me in the right direction ? can I just download a rom for the OP nord ce 2 lite 5g, put it on my phone and have twrp install it? could someone guide me please. many thanks!
lemonmuffs said:
Hi everyone, just to piggy back on this thread, I also have the same device, and I have unofficial twrp and boot loader unlocked, however I have no back up rom and just want to get the phone back to normal really. Ive been following guides all over the place, but could someone point me in the right direction ? can I just download a rom for the OP nord ce 2 lite 5g, put it on my phone and have twrp install it? could someone guide me please. many thanks!
Click to expand...
Click to collapse
Yes, that will work.
vikas_anakin said:
Yes, that will work.
Click to expand...
Click to collapse
Or else you can extract img files from the oneplus rom file.
and flash them using fastboot.
Okay thank you for the reply, would you be able to point me to a official img file ? Or maybe someone has one extracted I could use please? I have looked online, but the ones I have gotten don't seem to work. I have also looked on the oneplus website for an official img but I could not find one.
So after a little more research, I can use another android device with the app Oxygen updater, download the full img.... So I am currently doing that and then ill try use fastboot or twrp to flash. Just wanted to spread info incase anyone else is having issues getting latest official roms for this device.
Hey guys, i have bricked my Oneplus Nord ce 2 lite 5g (Cph2381)
I tried using the fastboot enhance tool to flash a payload.bin file i thought was the right one for the device ..the device went to blackscreen..ive tried switching it on but its not working..ive done alittle research and found out that i should use an msm tool to force flash the initial stock firmware so that it can boot up ...problem is i cant seem to find the right msm tool for Oneplus nord ce 2 lite 5g , which msm tool can i use ? help please
Jazzyjuis said:
Hey guys, i have bricked my Oneplus Nord ce 2 lite 5g (Cph2381)
I tried using the fastboot enhance tool to flash a payload.bin file i thought was the right one for the device ..the device went to blackscreen..ive tried switching it on but its not working..ive done alittle research and found out that i should use an msm tool to force flash the initial stock firmware so that it can boot up ...problem is i cant seem to find the right msm tool for Oneplus nord ce 2 lite 5g , which msm tool can i use ? help please
Click to expand...
Click to collapse
Hey man, I would suggest not going with msm tool or anything.
Just download the latest update file of your device using oneplus updater app, or you can ask for the file if some of your friends has the same device.
use this tool to extract payload files https://github.com/vm03/payload_dumper
Now you can follow the same procedure as here https://forum.xda-developers.com/t/...ock-oxygenos-firmware-on-oneplus-10r.4465077/