Can anyone teach me how to solve this??THANXS....
What is the problem you noticed?
supleader99 said:
Can anyone teach me how to solve this??THANXS....
Click to expand...
Click to collapse
Is it the mismatch between CSC codes?
Firmware and active CSC codes are different.
Well, you have a phone from Malaysia; while the ROM is French.
You can change both.
To change ROM CSC that's simple. Grab the relevant CSC rom from Sammobile or any other firmware site and install via ODIN. (Most phones have a relevant section/guide in their XDA sub-forum.)
To change device CSC, you need tools and it may not be supported at all. I used "SamKey", you need to buy keys from the company, but it worked. On my Note 10+ it worked, on my Note 9 it worked, on my S10e it worked. On my Note 9 512GB it failed. Basically the tool has to support your specific device variant AND if you are on latest firmware you must wait because they need time to make the tool compatible.
jwoegerbauer said:
What is the problem you noticed?
Click to expand...
Click to collapse
Can i can it to fully XME??? To fix it?? or i just flash with PTR...but now im leaving in Malaysia...
h8Aramex said:
Well, you have a phone from Malaysia; while the ROM is French.
You can change both.
To change ROM CSC that's simple. Grab the relevant CSC rom from Sammobile or any other firmware site and install via ODIN. (Most phones have a relevant section/guide in their XDA sub-forum.)
To change device CSC, you need tools and it may not be supported at all. I used "SamKey", you need to buy keys from the company, but it worked. On my Note 10+ it worked, on my Note 9 it worked, on my S10e it worked. On my Note 9 512GB it failed. Basically the tool has to support your specific device variant AND if you are on latest firmware you must wait because they need time to make the tool compatible.
Click to expand...
Click to collapse
Okey tq
Kenora_I said:
Is it the mismatch between CSC codes?
Firmware and active CSC codes are different.
Click to expand...
Click to collapse
With one CSC firmware i should flash?any suggestion??
Well, I suppose you want to match the device's CSC, so I'd grab the XME one from Sammobile. And you need ODIN to flash. The whole ordeal should not affect your e-fuse/warranty/KNOX status. At least I never managed to trip mine by doing these.
But, I also used mismatch CSC firmware for months if not years at times and it didn't do a thing. Like I didn't notice any difference. I wanted to enable call recording, but I realized it only works if I change device CSC and then also flash the relevant ROM.
supleader99 said:
Okey tq
With one CSC firmware i should flash?any suggestion??
Click to expand...
Click to collapse
Flash CSC with SamKey
h8Aramex said:
Well, I suppose you want to match the device's CSC, so I'd grab the XME one from Sammobile. And you need ODIN to flash. The whole ordeal should not affect your e-fuse/warranty/KNOX status. At least I never managed to trip mine by doing these.
But, I also used mismatch CSC firmware for months if not years at times and it didn't do a thing. Like I didn't notice any difference. I wanted to enable call recording, but I realized it only works if I change device CSC and then also flash the relevant ROM.
Click to expand...
Click to collapse
but if you want to relock bootloader make sure the CSC is same as the origin. Or you might brick your phone.
Kenora_I said:
Flash CSC with SamKey
but if you want to relock bootloader make sure the CSC is same as the origin. Or you might brick your phone.
Click to expand...
Click to collapse
U means CSC origin?? In my case..what csc should i flash??PTR or XME??might brick my phone
you can flash any csc just dont relock your bootloader.
Kenora_I said:
Flash CSC with SamKey
but if you want to relock bootloader make sure the CSC is same as the origin. Or you might brick your phone.
Click to expand...
Click to collapse
How to get SamKey??sorry im new here
supleader99 said:
How to get SamKey??sorry im new here
Click to expand...
Click to collapse
SamKey is a paid, third-party software.
- You have to buy credits for it to work. So you need to pay.
- It may or may NOT support your device (they do refund if it's not supported).
- You don't need to be a Hollywood hacker to use it, but if you are really unfamiliar with everything in general - I would recommend not using it.
Kenora_I said:
you can flash any csc just dont relock your bootloader.
Click to expand...
Click to collapse
h8Aramex said:
SamKey is a paid, third-party software.
- You have to buy credits for it to work. So you need to pay.
- It may or may NOT support your device (they do refund if it's not supported).
- You don't need to be a Hollywood hacker to use it, but if you are really unfamiliar with everything in general - I would recommend not using it.
Click to expand...
Click to collapse
ok thank you....
Related
Anyone who owns G930F and didn't have VoLTE or WiFi calling enabled on Nougat firmware BUT managed to get it working afterdoing "x" please share how to do it.
I'm tired of waiting for my Network to release the firmware...
Step by step guide would be welcome
My service provider supports both techs.
thundastruck said:
Anyone who owns G930F and didn't have VoLTE or WiFi calling enabled BUT managed to get it working afterdoing "x" please share how to do it.
I'm tired of waiting for my Network to release the firmware...
Click to expand...
Click to collapse
First and most important ....does your carrier offer those options?
MAX 404 said:
First and most important ....does your carrier offer those options?
Click to expand...
Click to collapse
Of course they do! :good:
Basically just want to know what would happen if I flashed carrier branded csc only with Odin.
E.g. would my phone refuse to boot, would my phone be carrier branded if it succesfully boots, trip Knox, etc...
Any info welcome - tired of googling the answers or searching XDA forum for answers.
thundastruck said:
Basically just want to know what would happen if I flashed carrier branded csc only with Odin.
E.g. would my phone refuse to boot, would my phone be carrier branded if it succesfully boots, trip Knox, etc...
Any info welcome - tired of googling the answers or searching XDA forum for answers.
Click to expand...
Click to collapse
Might have some carrier preinstalled crap but it won't trip KNOX nor prevent the phone from booting
thundastruck said:
Basically just want to know what would happen if I flashed carrier branded csc only with Odin.
E.g. would my phone refuse to boot, would my phone be carrier branded if it succesfully boots, trip Knox, etc...
Any info welcome - tired of googling the answers or searching XDA forum for answers.
Click to expand...
Click to collapse
Hi mate,,,,
Some more info would help , like what firmware /CSC you have now and what firmware carriers CSC you need....
Anyhow you may find this interesting, check here
MAX 404 said:
First and most important ....does your carrier offer those options?
Click to expand...
Click to collapse
MAX 404 said:
Hi mate,,,,
Some more info would help , like what firmware /CSC you have now and what firmware carriers CSC you need....
Anyhow you may find this interesting, check here
Click to expand...
Click to collapse
That answered some of my questions, thanks.
Please see screenshot for my mutiCSC firmware. I am running Android 7 but haven't changed CSC since I got the phone in December 2016. I got it with Marshmallow on it. Everytime I upgrade firmware with Odin I select Home CSC so my CSC never changes.
Since the solution is in the CSC (afaik), which CSC do you recommend I flash with Odin? I understand how to flash with Odin if CSC not in my multiCSC firmware (tick re-partition, etc...)
My home network is Vodafone (CSC is XVF which is not part of my CSC).
thundastruck said:
That answered some of my questions, thanks.
Please see screenshot for my mutiCSC firmware. I am running Android 7 but haven't changed CSC since I got the phone in December 2016. I got it with Marshmallow on it. Everytime I upgrade firmware with Odin I select Home CSC so my CSC never changes.
Since the solution is in the CSC (afaik), which CSC do you recommend I flash with Odin? I understand how to flash with Odin if CSC not in my multiCSC firmware (tick re-partition, etc...)
My home network is Vodafone (CSC is XVF which is not part of my CSC).
Click to expand...
Click to collapse
If i got it right you are not root, right? if you are root there are other ways....
Yes you need the right CSC to make it work , in this case Vodafone XFV.
When you change to a different CSC is recommended to check re partition to adjust to the possible change in partitions
https://www.sammobile.com/firmwares/galaxy-s7/SM-G930F/XFV/download/G930FXXU1DQD2/131635/
Download the firmware and extract the correct CSC from it , if you do not want all the vodafone stuff you could download and unbranded firmware and use the BL ,CP , AP from it and the CSC (XFV) from Vodafone and flash it all together
BACK UP FIRST .......
MAX 404 said:
If i got it right you are not root, right? if you are root there are other ways....
Yes you need the right CSC to make it work , in this case Vodafone XFV.
When you change to a different CSC is recommended to check re partition to adjust to the possible change in partitions
https://www.sammobile.com/firmwares/galaxy-s7/SM-G930F/XFV/download/G930FXXU1DQD2/131635/
Download the firmware and extract the correct CSC from it , if you do not want all the vodafone stuff you could download and unbranded firmware and use the BL ,CP , AP from it and the CSC (XFV) from Vodafone and flash it all together
BACK UP FIRST .......
Click to expand...
Click to collapse
Yes, no root (for now). Will only root in a year when I get my upgrade on my contract.
Thanks, you basically confirmed what I suspected. Just needed a Jedi to point that out so I have peace of mind. I shall report back... :highfive: :good:
thundastruck said:
Yes, no root (for now). Will only root in a year when I get my upgrade on my contract.
Thanks, you basically confirmed what I suspected. Just needed a Jedi to point that out so I have peace of mind. I shall report back... :highfive: :good:
Click to expand...
Click to collapse
No problem mate.
Let us know how it goes
Hello
I bought an s8+ from HK which is the dual SIM Snapdragon version (G9550). Using it here in Australia, everything works as expected as it supports all of our bands, however VoLTE does not work. I've read this is because the CSC does not match a local CSC.
Unfortunately there are no Snapdragon versions sold here, hence no firmware with the Aus CSC (XSA) that will support VoLTE (as I read you can't flash the Exynos ROM onto the Snapdragon).
Is there any way I can enable VoLTE? Can I somehow change the CSC without an official ROM? Like go into the G9550 ROM and replace the CSC with the Aus CSC?
The only other region with the Snapdragon is the US from what I can tell, which probably wouldn't enable VoLTE either.
Any advice is appreciated
Thanks.
ult_nrg said:
Hello
I bought an s8+ from HK which is the dual SIM Snapdragon version (G9550). Using it here in Australia
Is there any way I can enable VoLTE? Can I somehow change the CSC without an official ROM? Like go into the G9550 ROM and replace the CSC with the Aus CSC?
The only other region with the Snapdragon is the US from what I can tell, which probably wouldn't enable VoLTE either.
Any advice is appreciated
Thanks.
Click to expand...
Click to collapse
You may root and then flash your csc zip (or simply replace the CSC files in the custom rom with your CSC files). You should get VoLTE. Download Multi CSC file from here and extract your csc.
I do the same but with India CSC on USA snapdragon models.
nimms said:
You may root and then flash your csc zip (or simply replace the CSC files in the custom rom with your CSC files). You should get VoLTE. Download Multi CSC file from here and extract your csc.
I do the same but with India CSC on USA snapdragon models.
Click to expand...
Click to collapse
Thanks nimms. This is pretty much exactly what I was after, except I cannot root the phone (work required Knox so I can't trip it ). I was hoping I could do somthing like the above, only via Odin, but it sounds like you can't change the CSC without rooting the phone due to making system changes.
Try this code in dialer *#272*imei# and change your csc from there
thatsupnow said:
Try this code in dialer *#272*imei# and change your csc from there
Click to expand...
Click to collapse
Thanks for the reply!
I've tried that but unfortunately get a dialog saying "UNKNOWN APPLICATION".
ult_nrg said:
Hello
I bought an s8+ from HK which is the dual SIM Snapdragon version (G9550). Using it here in Australia, everything works as expected as it supports all of our bands, however VoLTE does not work. I've read this is because the CSC does not match a local CSC.
Unfortunately there are no Snapdragon versions sold here, hence no firmware with the Aus CSC (XSA) that will support VoLTE (as I read you can't flash the Exynos ROM onto the Snapdragon).
Is there any way I can enable VoLTE? Can I somehow change the CSC without an official ROM? Like go into the G9550 ROM and replace the CSC with the Aus CSC?
The only other region with the Snapdragon is the US from what I can tell, which probably wouldn't enable VoLTE either.
Any advice is appreciated
Thanks.
Click to expand...
Click to collapse
Hi
As far as I'm concerned, this is not possible without tripping the Knox counter. And if you try flashing the XSA CSC (via Odin), you will definitely soft brick your phone
ims setting. maybe can fix your issue ,just download a hidden app display. then you can open ins setting
t-shock said:
Hi
As far as I'm concerned, this is not possible without tripping the Knox counter. And if you try flashing the XSA CSC (via Odin), you will definitely soft brick your phone
Click to expand...
Click to collapse
Odin won't even flash it, It's pretty hard to soft brick this phone with official tools and firmware.
Interceptor777 said:
Odin won't even flash it, It's pretty hard to soft brick this phone with official tools and firmware.
Click to expand...
Click to collapse
Yes
Odin won't flash it but if you try to flash it and after that you reboot, you will stuck at download mode. Only by flashing the correct files, will make it boot
t-shock said:
Yes
Odin won't flash it but if you try to flash it and after that you reboot, you will stuck at download mode. Only by flashing the correct files, will make it boot
Click to expand...
Click to collapse
Interesting.
Another question...the only difference I've noticed between the 9550 (HK) and 955U (US) is that the US version does not have Band 28 but the HK version does, which we do use here in Aus.
If I flashed a US firmware (which has the same S835 SoC), would I lose Band28, or would the modem still be able to use it?
EDIT: what if I only flashed the CP file (modem), is this interchangeable between the different SoCs? Could I flash the XSA CP (modem) onto another ROM, or will this soft-brick?
wangksn said:
ims setting. maybe can fix your issue ,just download a hidden app display. then you can open ins setting
Click to expand...
Click to collapse
My IMS is saying "Not registered" in the about phone. I can't seem to do anything about it, and the hidden menu doesn't give me the option to change it.
IMS setting is located explicitly on "Settings -> Mobile Networks -> Access Point Names"
The best bet you may try is to find a Samsung phone thats currently in VoLTE then copy IMS apn settings onto you phone (you manually input the settings).
ult_nrg said:
Interesting.
Another question...the only difference I've noticed between the 9550 (HK) and 955U (US) is that the US version does not have Band 28 but the HK version does, which we do use here in Aus.
If I flashed a US firmware (which has the same S835 SoC), would I lose Band28, or would the modem still be able to use it?
EDIT: what if I only flashed the CP file (modem), is this interchangeable between the different SoCs? Could I flash the XSA CP (modem) onto another ROM, or will this soft-brick?
My IMS is saying "Not registered" in the about phone. I can't seem to do anything about it, and the hidden menu doesn't give me the option to change it.
Click to expand...
Click to collapse
it is can change if you know the parameter. I see have a lots of valume, I don't know why I can't upload the snapshot to hare
Hey , its too easy to get CSC to another Provider. Just ADB Sideload it. I can give you the mod for Germany VD2 or Verizon USA. No Tripping and knox 0x0
012345678 said:
Hey , its too easy to get CSC to another Provider. Just ADB Sideload it. I can give you the mod for Germany VD2 or Verizon USA. No Tripping and knox 0x0
Click to expand...
Click to collapse
Please, write detailed instructions for G9550 and example .zip
012345678 said:
Hey , its too easy to get CSC to another Provider. Just ADB Sideload it. I can give you the mod for Germany VD2 or Verizon USA. No Tripping and knox 0x0
Click to expand...
Click to collapse
+1
Dr. said:
[No_WaY;76004070]+1
Click to expand...
Click to collapse
I need the mod please for changing csc
012345678 said:
Hey , its too easy to get CSC to another Provider. Just ADB Sideload it. I can give you the mod for Germany VD2 or Verizon USA. No Tripping and knox 0x0
Click to expand...
Click to collapse
Do not enter people astray, ADB Sideload It's not working - error "signature verification failed"
need ROOT
VD2-CSC-S8S8p
MY Galaxy S8+ SM-G9550, SW - G9550ZHU2AQL2
Just download an official ROM (A variant from a country that supports VoLTE) for ur model from sammobile or u might even find it on the xda forum and flash it via odin with Home CSC.
It works well... No need to root n KNOX counter wont be tripped...
PS: Backup data.. They will be lost in the process.
Now we're talking about ADB, not ODIN or TWRP.
Flash via ADB Sideload - not possible. You understand me. Smartphones snapdragon not flash Exynos SW. You can only edit an existing profile CSC or add new CSC.
Example:
my smartphone TGY (snapdragon model SW)
but I live in the region of SER (EXYNOS MODEL SW)
GRIBL said:
Now we're talking about ADB, not ODIN or TWRP.
Flash via ADB Sideload - not possible. You understand me. Smartphones snapdragon not flash Exynos SW. You can only edit an existing profile CSC or add new CSC.
Example:
my smartphone TGY (snapdragon model SW)
but I live in the region of SER (EXYNOS MODEL SW)
Click to expand...
Click to collapse
Right, My bad... I missed the international part itself...
But as far as i know, Exynos CSCs also dont go with the Snapdragon CSCs... I could be wrong.
I don't find note 20 ultra Dual sim firmware. Does the N986b/ds use same firmware as the N986b without loosing dual sim function? Reason I'm thinking on flashing is cause I have a xfa version and network reception is really bad and thinking on flashing btu. Do u guys think that a new firmware might help? (all other devices I get 3 bar at home and with note 20 ultra sometimes I have no network)
Check here for your required FW.
N986B is the Global Exynos model (it is Dual-SIM = DS); in case if any regions are single-SIM for this particular model (I'm not aware as such), the N986B FW will still be the same as for DS.
elmor0 said:
Check here for your required FW.
N986B is the Global Exynos model (it is Dual-SIM = DS); in case if any regions are single-SIM for this particular model (I'm not aware as such), the N986B FW will still be the same as for DS.
Click to expand...
Click to collapse
Thank you. Do u think if I flash a different country firmware, might help with poor signal?
specia1one said:
Thank you. Do u think if I flash a different country firmware, might help with poor signal?
Click to expand...
Click to collapse
It's possible I think.
But..... only try other Exynos region FW (cannot flash FW for SnapDragon variants on N986B without running into problems).
Check on Note 20 threads regarding properly changing CSC.
Also, there are some .xml modification solutions that enable you to activate extra 4g/5g bands - worth a search & try.
(Sorry I don't have the links to hand, but recall seeing these discussions before on N20 XDA forums).
I'm with Three UK does this help
Cheers eddie
If I download BTU firmware and just flash it with Odin won't it just install firmware and radio software? Sorry I been away from Samsung for some years now. In past was just easy to flash a d all would work.
specia1one said:
If I download BTU firmware and just flash it with Odin won't it just install firmware and radio software? Sorry I been away from Samsung for some years now. In past was just easy to flash a d all would work.
Click to expand...
Click to collapse
When you un-compress the firmware download you will get five files. Each go into a specific part of ODIN - can't mistake it - but if you want to keep data intact you will need to flash Home_CSC. This will NOT change your regional CSC however.
You also need the "hacked" version of ODIN found on this forum easily.
ultramag69 said:
When you un-compress the firmware download you will get five files. Each go into a specific part of ODIN - can't mistake it - but if you want to keep data intact you will need to flash Home_CSC. This will NOT change your regional CSC however.
You also need the "hacked" version of ODIN found on this forum easily.
Click to expand...
Click to collapse
If I flash that 5 files will I still be able to get Ota?
When I flash should I use CSC or HOME CSC. So that I keep getting updates? I think that if I flash UK international firmware, will sort alot of my issues. It feels in my country software is never very stable.
Flashing CSC will delete your Data but flashing HOME_CSC will not delete your Data.
elmor0 said:
Flashing CSC will delete your Data but flashing HOME_CSC will not delete your Data.
Click to expand...
Click to collapse
Will both ways I still get Ota even if I install btu firmware? (is there any benefit on me flashing the csc and not Home_CSC?)
Once bootloader unlocked I don't think you can get OTA - You'll need to flash FW updates manually.
Flash CSC for clean install.
Flash HOME_CSC if just updating FW & need to preserve user data.
elmor0 said:
Once bootloader unlocked I don't think you can get OTA - You'll need to flash FW updates manually.
Flash CSC for clean install.
Flash HOME_CSC if just updating FW & need to preserve user data.
Click to expand...
Click to collapse
So if I flash a different rom I won't be able to do Ota anymore?
No
specia1one said:
So if I flash a different rom I won't be able to do Ota anymore?
Click to expand...
Click to collapse
Not unless you re-lock BL.
Hopefully they'll come with a solution. I would like to flash a different rom (different country) and still get Ota updates as normal. I don't wanna be flashing every month
These are stock roms, why do you need to unlock your bootloader?
ultramag69 said:
These are stock roms, why do you need to unlock your bootloader?
Click to expand...
Click to collapse
I only want to flash a btu firmware. I don't need custom roms. Just want an advise and guidance. Cause I don't know now how it works. I was told here that I won't get otas if I flash a btu rom on my note 20 ultra that currently has xfa
specia1one said:
I only want to flash a btu firmware. I don't need custom roms. Just want an advise and guidance. Cause I don't know now how it works. I was told here that I won't get otas if I flash a btu rom on my note 20 ultra that currently has xfa
Click to expand...
Click to collapse
Yes I understand but why is someone talking about unlocking your bootloader?
You just want to change your CSC...
ultramag69 said:
Yes I understand but why is someone talking about unlocking your bootloader?
You just want to change your CSC...
Click to expand...
Click to collapse
I end up selling my note 20 ultra. Signal was bad. I'm using my p30 pro for now until I get something else. But I doubt will be a Samsung.
Thanks for help guys
Hi all,
I bought this phone from my friend who was using it on ATT. It is global unlocked phone and I activate and register, change new 5gsim and no problem on Verizon Network.
It is working and fine but, it shows ATT logo when phone is boot up and still it has ATT bloatware.
Under the Software information > Service provider software version is showing below
SAOMC_SM-F711U_OYN_ATT_RR_0016
ATT/ATT/ATT
SO THIS PHONE IS legit!! even Verizon told us. They did everything with me for 3 hours. wow!
Anyway, I think it's the problem of other carrier's software is in
Do you guys know how to change provider software to Verizon? should I contact Samsung??
Please help me.
Thank you!!!!!!!!
Leeman78 said:
Hi all,
I bought this phone from my friend who was using it on ATT. It is global unlocked phone and I activate and register, change new 5gsim and no problem on Verizon Network.
It is working and fine but, it shows ATT logo when phone is boot up and still it has ATT bloatware.
Under the Software information > Service provider software version is showing below
SAOMC_SM-F711U_OYN_ATT_RR_0016
ATT/ATT/ATT
SO THIS PHONE IS legit!! even Verizon told us. They did everything with me for 3 hours. wow!
Anyway, I think it's the problem of other carrier's software is in
Do you guys know how to change provider software to Verizon? should I contact Samsung??
Please help me.
Thank you!!!!!!!!
Click to expand...
Click to collapse
Flash a U1 software and VZW userdata.
rogerandgina06 said:
Flash a U1 software and VZW userdata.
Click to expand...
Click to collapse
Thank you for reply. I don't know what you mean and how should I do it?
Would you let me know?
Leeman78 said:
Thank you for reply. I don't know what you mean and how should I do it?
Would you let me know?
Click to expand...
Click to collapse
Read here to get a idea.
F711U and F711U1 Firmware Links and Flashing Discussion Here
(WIP, files are currently processing and uploading) For those who aren't already aware, F711U is the model number of all of the US carrier versions of the Z Flip3. The F711U1 is the model number of the same device, but sold by Samsung SIM...
forum.xda-developers.com
rogerandgina06 said:
Read here to get a idea.
F711U and F711U1 Firmware Links and Flashing Discussion Here
(WIP, files are currently processing and uploading) For those who aren't already aware, F711U is the model number of all of the US carrier versions of the Z Flip3. The F711U1 is the model number of the same device, but sold by Samsung SIM...
forum.xda-developers.com
Click to expand...
Click to collapse
I found solutions and flash the firmware with Verizon userdata, but, still shwoing everything on ATT. Not Verizon.
I even flash with factory reset. Yes, I used Odin 3.13.1b patched and it passed...
Do you have any idea?
Leeman78 said:
I found solutions and flash the firmware with Verizon userdata, but, still shwoing everything on ATT. Not Verizon.
I even flash with factory reset. Yes, I used Odin 3.13.1b patched and it passed...
Do you have any idea?
Click to expand...
Click to collapse
Try google to search for a different csc. After that I don't have a clue...
I got it working. Thank you. your "Flash a U1 software and VZW userdata." help me a lot.
I did find out good firmware and software at Sammobile and now everything works as Verizon.
Thank you
Leeman78 said:
I got it working. Thank you. your "Flash a U1 software and VZW userdata." help me a lot.
I did find out good firmware and software at Sammobile and now everything works as
Leeman78 said:
I found solutions and flash the firmware with Verizon userdata, but, still shwoing everything on ATT. Not Verizon.
I even flash with factory reset. Yes, I used Odin 3.13.1b patched and it passed...
Do you have any idea?
Click to expand...
Click to collapse
Can you link me to the one you used ? I’m trying to flash mine to u1 and I can’t get it to pass for anything, I keep getting model mismatch or complete write fail
Click to expand...
Click to collapse
@iHeartslutsz https://www.sammobile.com/samsung/galaxy-z-flip-3/firmware/#SM-F711U1
Whenever I flash a new software through Odin after downloading it from Sammobile, the Dark Side RC theme (I think it's related somehow to the so called Star Wars special edition) for samsung, comes as one of two default themes into the system and can not be removed. Hence, even I change the theme from setting, this iron head appears everytime I restart the phone for a few seconds. So I tried different firmwares for my country but nothing changes. So someone from another forum said that my service provider software version differs than theirs. So in short, how to get rid of this silly iron head? Any help would be appreciated.
change csc, use SamKEY (paid) or SamFwFRPTool (free), then flash frimware you need with odin with CSC file (this will wipe your phone and reset to factory), not use home_csc in odin
wojtas69 said:
change csc, use SamKEY (paid) or SamFwFRPTool (free), then flash frimware you need with odin with CSC file (this will wipe your phone and reset to factory), not use home_csc in odin
Click to expand...
Click to collapse
Thank you. I downloaded totally different firmware files with different CSC code and the problem has solved.
SamFwFRPTool is a tool I use to change my CSC software channel. The way I understand it you need to change the CSC in the program before flashing the u1 software on it so you get a full unlock as opposed to a partial one.
I might be wrong here though so don't take everything I say as being true.
How can i change my phone region in a way to fool Samsung keyboard?
I need thst to make Keys Cafe app to work properly in the chinese rom. Must change grom CHC to anywhere else.
I tried flashing a Home_CSC from another region, but the phone gets locked as soon as it boots.
I did flashed CSC from another region with no problems. try to follow the instructions here: https://forum.xda-developers.com/t/...fficial-firmware-noob-friendly.4404283/unread
Tgy, Bri and CHC are your only options.
eyalsa said:
I did flashed CSC from another region with no problems. try to follow the instructions here: https://forum.xda-developers.com/t/...fficial-firmware-noob-friendly.4404283/unread
Click to expand...
Click to collapse
Do you mean this part?
Optional: If you just want to change CSC, /efi/imei/mps_code.dat is where you can edit after rooting the phone
Replace the CSC you would like to be in the file
Click to expand...
Click to collapse
So, changing mps_code.dat from another firmware would change the region entirely?
I tried messing with optics/configs/carriers/CHC/conf/customer.xml to change region, but phone got locked, just as it was when flashing the entire Taiwan CSC.
The main reasons I want that is to remove chinese stuff from samsung system apps (keyboard,browser). have you tested this? Would chaning China for Hong Kong or Taiwan solve the problem?
Also, it's possible to make keys cafe work by changing country_code and sales_code and disabling/enabling samsung keyboard.
I just downloaded different region firmware and installed it with odin without any problem.
eyalsa said:
I just downloaded different region firmware and installed it with odin without any problem.
Click to expand...
Click to collapse
Yes, this works if you want to change the entire firmware. But did you flash only the CSC to keep rom and change region? When I tried, phone got locked.
I think i wasn't clear in OP. I wanted to change CSC onçy, keeping rom.
Did you try :https://mp.weixin.qq.com/s?__biz=Mz...27401369034d63&token=1141731964&lang=zh_CN#rd
NisseGurra said:
Did you try :https://mp.weixin.qq.com/s?__biz=Mz...27401369034d63&token=1141731964&lang=zh_CN#rd
Click to expand...
Click to collapse
This link says that the "make your own keyboard" doesn't work.
It worked by changing country_code and sales_code to USA and XAA