Database Info

[Q] Asus Zenfone 5 unbrick.. help me!

I update the phone TW to WW, in the process of updating the device stands at around 30%, which does not run on the next stop. I waited over 30 minutes still the same and I reset the phone and the result is brick, just boot up black screen and USB symbol, on the discovery fastboot recovery lost.
sorry, my english bad. :fingers-crossed:

flashtool use flash firmware for Asus Zenfone ?

please, help me !

Have you tried to download the firmwave on the official website?

amy520 said:
Have you tried to download the firmwave on the official website?
Click to expand...
Click to collapse
I have downloaded the official frimware, but I can not because there is no flash tool for Asus Zenfone on PC :crying:

Next time read instructions for flashing. Step 5 below is important to remember, you cant mix and match territory versions.
SUS ZenFone 5(T00J) software Image: V0430 for WW SKU only*
Steps of Update:
1. Check software version of your device**
2. Download device software and Update SOP (From “Manual” Item)
3. Only apply to same SKU update, Example: WW->WW, CN->CN, TW->TW.
4. Software update cannot transfer the software SKU and downgrade the software version.
5. Wrong SKU may cause update failure, please update the same SKU version only.
*How to know the device model?
Path: Settings->About-> Model number
**How to know the device software version?
Path: Settings->About-> software information->Build number
***System upgrade may cause part of data missing, please buckup your important data before system upgrading.

davidhuu said:
I update the phone TW to WW, in the process of updating the device stands at around 30%, which does not run on the next stop. I waited over 30 minutes still the same and I reset the phone and the result is brick, just boot up black screen and USB symbol, on the discovery fastboot recovery lost.
sorry, my english bad. :fingers-crossed:
Click to expand...
Click to collapse
you should not reboot your phone because it takes long time at 30% ........

davidhuu said:
I update the phone TW to WW, in the process of updating the device stands at around 30%, which does not run on the next stop. I waited over 30 minutes still the same and I reset the phone and the result is brick, just boot up black screen and USB symbol, on the discovery fastboot recovery lost.
sorry, my english bad. :fingers-crossed:
Click to expand...
Click to collapse
read #1 and V, and using google translate to understand: 1: Download và cài đặt Intel USB driver for Android vào máy tính tại đây
2: Download và giải nén ADB Fastboot Tool ra 1 folder tại đây
3: Download file Rom mới nhất tại mục II
4: Copy file Rom (đã giải nén 1 lần sau khi tải về) vào folder adb fastboot tool vừa download ở bước 2 và sửa tên thành "rom.zip"
5: Vào recovery mode bằng cách: Tắt máy (đợi 20s) > Nhấn giữ nút nguồn trước và sau đó nhấn giữ ngay volume down cho tới khi hiện hình con android (nằm lật ngửa) > ***g giữ volume down sau đó bấm volume up là vào được menu recovery > Chọn Wipe data > Wipe cache > Chọn Apply update from ADB.
6: Cắm cáp USB vào máy tính > Chạy Command Promt trong folder adb fastboot tool ở bước 2 bằng cách giữ phím shift + chuột phải chọn Open command window here.
7: Kiểm tra xem điện thoại đã kết nối được với máy tính ở chế độ fastboot thành công chưa bằng cách đánh lệnh "adb devices", nếu thành công thì tên điện thoại sẽ có dưới dạng 1 chuỗi kí tự (sau khi bấm lệnh nhấn Enter)
8: Đánh lệnh "adb sideload rom.zip" (sau khi bấm lệnh nhấn Enter)
Sorry my ENG

khacdinh326 said:
read #1 and V, and using google translate to understand: 1: Download và cài đặt Intel USB driver for Android vào máy tính tại đây
2: Download và giải nén ADB Fastboot Tool ra 1 folder tại đây
3: Download file Rom mới nhất tại mục II
4: Copy file Rom (đã giải nén 1 lần sau khi tải về) vào folder adb fastboot tool vừa download ở bước 2 và sửa tên thành "rom.zip"
5: Vào recovery mode bằng cách: Tắt máy (đợi 20s) > Nhấn giữ nút nguồn trước và sau đó nhấn giữ ngay volume down cho tới khi hiện hình con android (nằm lật ngửa) > ***g giữ volume down sau đó bấm volume up là vào được menu recovery > Chọn Wipe data > Wipe cache > Chọn Apply update from ADB.
6: Cắm cáp USB vào máy tính > Chạy Command Promt trong folder adb fastboot tool ở bước 2 bằng cách giữ phím shift + chuột phải chọn Open command window here.
7: Kiểm tra xem điện thoại đã kết nối được với máy tính ở chế độ fastboot thành công chưa bằng cách đánh lệnh "adb devices", nếu thành công thì tên điện thoại sẽ có dưới dạng 1 chuỗi kí tự (sau khi bấm lệnh nhấn Enter)
8: Đánh lệnh "adb sideload rom.zip" (sau khi bấm lệnh nhấn Enter)
Sorry my ENG
Click to expand...
Click to collapse
Đã nói là không thể vào chế độ fastboot rồi còn gì (Can't enter fastboot mode)
Ấn và giữ nút nguồn với tăng âm lượng cũng chỉ hiện mỗi cái biểu tượng usb thôi (Keep press power & volume+ phone only display usb symble)
Máy tính nhận cloverview drive nhưng không nhận adb
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Ngoc Hien Le said:
Đã nói là không thể vào chế độ fastboot rồi còn gì (Can't enter fastboot mode)
Ấn và giữ nút nguồn với tăng âm lượng cũng chỉ hiện mỗi cái biểu tượng usb thôi (Keep press power & volume+ phone only display usb symble)
Máy tính nhận cloverview drive nhưng không nhận adb
Click to expand...
Click to collapse
cai cai driver cua itel chua ban, khi cai nho vao compality chinh no lai thanh win 7 thu xem

bobr76 said:
Next time read instructions for flashing. Step 5 below is important to remember, you cant mix and match territory versions.
SUS ZenFone 5(T00J) software Image: V0430 for WW SKU only*
Steps of Update:
1. Check software version of your device**
2. Download device software and Update SOP (From “Manual” Item)
3. Only apply to same SKU update, Example: WW->WW, CN->CN, TW->TW.
4. Software update cannot transfer the software SKU and downgrade the software version.
5. Wrong SKU may cause update failure, please update the same SKU version only.
*How to know the device model?
Path: Settings->About-> Model number
**How to know the device software version?
Path: Settings->About-> software information->Build number
***System upgrade may cause part of data missing, please buckup your important data before system upgrading.
Click to expand...
Click to collapse
My zenfone 5:
- Sideload Success
- Factory reset fail
- Wipe data fail
It's can't login now. :crying:

phongthanjkm said:
My zenfone 5:
- Sideload Success
- Factory reset fail
- Wipe data fail
It's can't login now. :crying:
Click to expand...
Click to collapse
whre i can view ?"*How to know the device model?
Path: Settings->About-> Model number
**How to know the device software version?
Path: Settings->About-> software information->Build number"

check out at customer service center at asus. they might help u.

Unbrick your fone here.
If you are able to flash fast boot, then you will be ok.
Look here
http://forum.xda-developers.com/android/help/asus-zenfone-5-t00f-install-rom-problem-t2821335/page3

help me please
it

@davidhuu: so your Zenfone 5 (Zen) cannot boot into droidboot mode now?
In order to boot into droidboot mode, you should follow these following steps:
1. If your Zen is opening then let press and hold the Power button to switch it off or if it is off then go to next step!
2. Wait for 20 seconds then press and hold both Power and Volume Up buttons until it is booted into droidboot (screen indicates droidboot with menu)
Can you try this to advise me back? If you could then we can fix for your situation.
Thanks.

tesl all tool unbrick zen 5. not ok all tool, all solution zen 5 usb logo. waiting asus support solution

Is there a way to autostart app on startup LG TV WebOS 3

read the title. thanks

i look for the same thing please help

I found a way... you need to root your tv....
Works on webos 1.4.0-3.0.0. If you have higher version like 3.3.3 then it will not work.
Guide for rooting (english)
forum.xda-developers.com/web-os/general/rooting-webos-tv-t3656027
autorun guide (russian-use Google translate webos-forums.ru/topic4650.html )
Как добавить приложение в автозагрузку, чтобы при включении ТВ оно автоматически запускалось?
Разберем на примере ForkPlayer.
КОД: ВЫДЕЛИТЬ ВСЁ
busybox chroot /proc/1/root
ls -l /media/cryptofs/apps/usr/palm/applications/
Ищете папку форкплеера
Если нашли делаете:
КОД: ВЫДЕЛИТЬ ВСЁ
cat /media/cryptofs/apps/usr/palm/applications/папка_форк_плеера/appinfo.json
Ищете надпись типа:
КОД: ВЫДЕЛИТЬ ВСЁ
"id":"es.ottplayer.widget"
Это у меня ottplayer.
Запоминаете копируете надпись после "id" (без кавычек)
Затем при помощи редактора vim редактируете файл
КОД: ВЫДЕЛИТЬ ВСЁ
/media/cryptofs/apps/usr/palm/services/com.palmdts.devmode.service/start-devmode.sh
Добавив после #!/bin/sh строку типа:
КОД: ВЫДЕЛИТЬ ВСЁ
luna-send -n 1 -f luna://com.webos.applicationManager/launch '{"id": "com.webos.app.mystarter", "params":{}}'
Только вместо com.webos.app.mystarter вписываете свой id форк плеера.
Если не знаете как пользоваться vim - учитесь

I'm looking for same (autostart official IPTV app from provider). But this translation from Russian -> English is quite hard to understand. :/

Is there a way to do it with newer versions?
I am using WebOs 4.70.

Need it as well

rainy1506 said:
I found a way... you need to root your tv....
Works on webos 1.4.0-3.0.0. If you have higher version like 3.3.3 then it will not work.
Guide for rooting (english)
forum.xda-developers.com/web-os/general/rooting-webos-tv-t3656027
autorun guide (russian-use Google translate webos-forums.ru/topic4650.html )
Как добавить приложение в автозагрузку, чтобы при включении ТВ оно автоматически запускалось?
Разберем на примере ForkPlayer.
КОД: ВЫДЕЛИТЬ ВСЁ
busybox chroot /proc/1/root
ls -l /media/cryptofs/apps/usr/palm/applications/
Ищете папку форкплеера
Если нашли делаете:
КОД: ВЫДЕЛИТЬ ВСЁ
cat /media/cryptofs/apps/usr/palm/applications/папка_форк_плеера/appinfo.json
Ищете надпись типа:
КОД: ВЫДЕЛИТЬ ВСЁ
"id":"es.ottplayer.widget"
Это у меня ottplayer.
Запоминаете копируете надпись после "id" (без кавычек)
Затем при помощи редактора vim редактируете файл
КОД: ВЫДЕЛИТЬ ВСЁ
/media/cryptofs/apps/usr/palm/services/com.palmdts.devmode.service/start-devmode.sh
Добавив после #!/bin/sh строку типа:
КОД: ВЫДЕЛИТЬ ВСЁ
luna-send -n 1 -f luna://com.webos.applicationManager/launch '{"id": "com.webos.app.mystarter", "params":{}}'
Только вместо com.webos.app.mystarter вписываете свой id форк плеера.
Если не знаете как пользоваться vim - учитесь
Click to expand...
Click to collapse
How do I add an application to autoload so that when I turn on my TV it will start automatically?
Let's look at ForkPlayer for example.
Code:
busybox chroot /proc/1/root
ls -l /media/cryptofs/apps/usr/palm/applications/
Looking for the forkplayer folder
If found doing:
Code:
cat /media/cryptofs/apps/usr/palm/applications/folder_fork_player/appinfo.json
Looking for an inscription type:
Code:
"id": "es.ottplayer.widget"
I have this ottplayer.
Remember to copy the inscription after "id" (without the quotes).
Then use the vim editor to edit the file
Code:
/media/cryptofs/apps/usr/palm/services/com.palmdts.devmode.service/start-devmode.sh
Adding a line of type after #!/bin/sh:
Code:
luna-send -n 1 -f luna://com.webos.applicationManager/launch '{"id": "com.webos.app.mystarter", "params":{}}'.
Only instead of com.webos.app.mystarter type in your forkplayer id.
If you don't know how to use vim, learn how to use it.

With rooted LG Tvs (https://rootmy.tv/) I think is possible a way to autostart an application on startup because in https://github.com/RootMyTV/RootMyTV.github.io there is a text that says:
​
I want to run some commands as root during boot!​
Our startup script runs all executable files in /var/lib/webosbrew/init.d on boot (via run-parts - filenames may only contain a-zA-Z0-9-_ letters!) - create your own scripts there.
Create any customizations there and do not modify existing RootMyTV/Homebrew Channel scripts, since these may be overwritten on future updates.
If you are a homebrew developer - create a symlink to a script in your own app path there, and do not copy over anything there.
Click to expand...
Click to collapse
​I have connected my computer with LG TV via SSH (using WinSCP). LG TV IP, user: root password: alpine​I´ve checked the file start-devmode.sh, and after rooting the TV the text says:​​
# *** W A R N I N G ***
#
# Do **not** touch this file, nor /var/lib/webosbrew/startup.sh - this is a
# crucial part of RootMyTV exploit chain.
#
# If you want your own startup script customization, create an executable script
# in /var/lib/webosbrew/init.d/ directory - this will be ran during early
# bootup.
#
# *** W A R N I N G ***
LD_PRELOAD="" nohup sh /var/lib/webosbrew/startup.sh & >/dev/null
Click to expand...
Click to collapse
by the way, the content of the startup.sh is https://github.com/webosbrew/webos-homebrew-channel/blob/main/services/startup.sh#L77-L80
Then I have created a file .sh to austostart an application (the id of the application is com.telefonica.app.nux) on startup in /var/lib/webosbrew/init.d/ directory, but it not works.​The content of the file is:​
luna-send -n 1 -f luna://com.webos.applicationManager/launch '{"id": "com.telefonica.app.nux", "params":{}}'​
Click to expand...
Click to collapse
​But nothing happens when I reboot the Tv. It starts normally. Do I need to add more lines in the file .sh? I have no idea of Linux but I think what I have done it correctly to start an application on startup.​

Solved to start a program when starting the LG TV.
The file does not have to have any extension and no strange characters. The content will be this (com.telefonica.app.nux is the application. To choose another application that we want to start we must know its id, which comes in one of the appinfo.json files that comes in the folders where the application is installed):
luna-send -n 1 -f luna://com.webos.applicationManager/launch '{"id": "com.telefonica.app.nux", "params":{}}'
We place the file in the path /var/lib/webosbrew/init.d/ of our TV. It has to have all the permissions enabled (we can copy the file startup.sh that is in the folder above, rename it and edit it to have a file with all the permissions or attributes enabled).
We disable fastboot in the TV Options.
The only downside is that the program takes a few seconds to start (in my case it took 8 seconds from the moment the TV is turned on).
For those who use a telnet terminal with commands is tedious or have no idea (like me), you can use the WinSCP program that connects perfectly (IP of the TV, port 22, the user is root and the password is alpine). It has Windows interface and options to copy or edit the files without any problem.

[please help] realme q2 error fastboot mode

Hi all,
i do apologize in advance if my english is not very clear. my realme q2 was just unbox today and i tried to root it right then, this was the 2nd one i bought and the first has been rooted very well. i did the same but got error, maybe i missed certain steps that i was not really careful. after unlocking successful i flash and boot to twrp realme q2, in that recovery i did advanced wipe and stick only dalvik/art chache wipe and reboot. then i could not get in twrp anymore with the same code
fastboot mode:
adb reboot botloader
flash twrp:
fastboot flash recovery twrpq2.img
fix bootloop:
fastboot flash vbmeta vbmeta.img
reboot to recovery:
fastboot boot twrpq2.img
then i did factory reset, the phone went to twrp mode itself that i couldnt know how. i wiped again with stick dalvik/art cache, data, cache and reboot to copy file rom that i rooted successful before, from now when i entered fastboot mode with cmd or hard button volume down + power button it appear fastboot mode very fast 0,2 sencond then disappear and restart phone itself, i never get in fastboot mode again. i tried installing another Rom successful but the error still persist, did everything from hard reset to try new rom, fastboot mode never came back to me. my phone is using normally now but could not root anymore, please help me!!!

i never face this case before

To make use of TWRP nobody needs to flash it: to use TWRP simply boot into it.
To reboot phone in Fastboot mode you run
Code:
adb devices
adb reboot fastboot

jwoegerbauer said:
To make use of TWRP nobody needs to flash it: to use TWRP simply boot into it.
To reboot phone in Fastboot mode you run
Code:
adb devices
adb reboot fastboot
Click to expand...
Click to collapse
yes but now i can not get in fastboot mode anymore, it simply appears fastboot mode then restart phone itself

Re-flash phone's Stock ROM.

jwoegerbauer said:
Re-flash phone's Stock ROM.
Click to expand...
Click to collapse
i installed new version rom in realme official page and now cannot be down rom lower version. no twrp how could i re - flash the stock rom

The Realme Q2 is based on a MediaTek chipset, hence you use MTK Flash Tool to re-flash its Stock ROM.

jwoegerbauer said:
The Realme Q2 is based on a MediaTek chipset, hence you use MTK Flash Tool to re-flash its Stock ROM.
Click to expand...
Click to collapse
okay i will try, thank you bro !!!!

A Who knows if I install Will the gsi rom work on the 5g and 120hertzs of the screen?

anhditimem_9955 said:
Chào mọi người,
Tôi xin lỗi trước nếu tiếng Anh của tôi không rõ ràng lắm. Realme q2 của tôi vừa mới được mở hộp hôm nay và tôi đã cố gắng root nó ngay lúc đó, đây là chiếc thứ 2 tôi mua và chiếc đầu tiên đã được root rất tốt. Tôi đã làm tương tự nhưng bị lỗi, có thể tôi đã bỏ lỡ một số bước mà tôi không thực sự cẩn thận. sau khi mở khóa thành công, tôi flash và khởi động vào twrp realme q2, trong lần khôi phục đó, tôi đã xóa nâng cao và chỉ dán dalvik / art chache wipe và khởi động lại. sau đó tôi không thể vào twrp nữa với ***g một mã
chế độ fastboot:
adb khởi động lại botloader
flash twrp:
khôi phục flash fastboot twrpq2.img
sửa lỗi bootloop:
fastboot flash vbmeta vbmeta.img
khởi động lại để khôi phục:
khởi động fastboot twrpq2.img
sau đó tôi đã khôi phục cài đặt gốc, điện thoại tự chuyển sang chế độ twrp mà tôi không thể biết làm thế nào. mình xóa sạch lại bằng stick dalvik / art cache, data, cache và khởi động lại để copy file rom mà mình đã root thành công trước đó, từ lúc vào chế độ fastboot bằng cmd hoặc nút cứng giảm âm lượng + nút nguồn thì nó hiện ra chế độ fastboot rất nhanh 0, 2 sencond sau đó biến mất và tự khởi động lại điện thoại, tôi không bao giờ vào được chế độ fastboot nữa. Tôi đã thử cài đặt rom khác thành công nhưng lỗi vẫn còn, đã làm mọi cách từ hard reset đến thử rom mới, chế độ fastboot không bao giờ quay lại với tôi. điện thoại của mình giờ đang sử dụng bình thường nhưng không thể root được nữa, mong các bạn giúp đỡ !!!
Click to expand...
Click to collapse
Xin chào! Bạn có thể cho tôi xin tệp TWRP.img của Realme Q2 với. Cảm ơn bạn!

anhditimem_9955 said:
Hi all,
i do apologize in advance if my english is not very clear. my realme q2 was just unbox today and i tried to root it right then, this was the 2nd one i bought and the first has been rooted very well. i did the same but got error, maybe i missed certain steps that i was not really careful. after unlocking successful i flash and boot to twrp realme q2, in that recovery i did advanced wipe and stick only dalvik/art chache wipe and reboot. then i could not get in twrp anymore with the same code
fastboot mode:
adb reboot botloader
flash twrp:
fastboot flash recovery twrpq2.img
fix bootloop:
fastboot flash vbmeta vbmeta.img
reboot to recovery:
fastboot boot twrpq2.img
then i did factory reset, the phone went to twrp mode itself that i couldnt know how. i wiped again with stick dalvik/art cache, data, cache and reboot to copy file rom that i rooted successful before, from now when i entered fastboot mode with cmd or hard button volume down + power button it appear fastboot mode very fast 0,2 sencond then disappear and restart phone itself, i never get in fastboot mode again. i tried installing another Rom successful but the error still persist, did everything from hard reset to try new rom, fastboot mode never came back to me. my phone is using normally now but could not root anymore, please help me!!!
Click to expand...
Click to collapse
Hello! can you give me the twrp.img file for Realme Q2!

anhditimem_9955 said:
Hi all,
i do apologize in advance if my english is not very clear. my realme q2 was just unbox today and i tried to root it right then, this was the 2nd one i bought and the first has been rooted very well. i did the same but got error, maybe i missed certain steps that i was not really careful. after unlocking successful i flash and boot to twrp realme q2, in that recovery i did advanced wipe and stick only dalvik/art chache wipe and reboot. then i could not get in twrp anymore with the same code
fastboot mode:
adb reboot botloader
flash twrp:
fastboot flash recovery twrpq2.img
fix bootloop:
fastboot flash vbmeta vbmeta.img
reboot to recovery:
fastboot boot twrpq2.img
then i did factory reset, the phone went to twrp mode itself that i couldnt know how. i wiped again with stick dalvik/art cache, data, cache and reboot to copy file rom that i rooted successful before, from now when i entered fastboot mode with cmd or hard button volume down + power button it appear fastboot mode very fast 0,2 sencond then disappear and restart phone itself, i never get in fastboot mode again. i tried installing another Rom successful but the error still persist, did everything from hard reset to try new rom, fastboot mode never came back to me. my phone is using normally now but could not root anymore, please help me!!!
Click to expand...
Click to collapse
Hi can you help me with the twrp image. I mean which twrp img did you flash

prith said:
Hi can you help me with the twrp image. I mean which twrp img did you flash
Click to expand...
Click to collapse
Maybe we will have to wait until there is an official twrp for the mtk dimensity 800u cpu for Q2 to have hope.

Check and Dump partitions in LG G7

Goto Fastboot mode
Type: fastboot boot ofox-new.img
to boot into Recovery OFox
unmount all partitions
Run optimize.cmd to check the partitions.
after that
Run dump.cmd to dump the partitions.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
@echo off
adb shell "e2fsck -f -y /dev/block/sda20"
adb shell "resize2fs /dev/block/sda20"
adb shell "e2fsck -f -y /dev/block/sda21"
adb shell "resize2fs /dev/block/sda21"
adb shell "e2fsck -f -y /dev/block/sda22"
adb shell "resize2fs /dev/block/sda22"
adb shell "e2fsck -f -y /dev/block/sda23"
adb shell "resize2fs /dev/block/sda23"
adb shell "e2fsck -f -y /dev/block/sda24"
adb shell "resize2fs /dev/block/sda24"
adb shell "e2fsck -f -y /dev/block/sda25"
adb shell "resize2fs /dev/block/sda25"
adb shell "e2fsck -f -y /dev/block/sda26"
adb shell "resize2fs /dev/block/sda26"
echo Press ENTER to reboot...
pause > nul
adb reboot
cls
Code:
adb pull /dev/block/sda24 OP_a.img
adb pull /dev/block/sda25 OP_b.img
adb pull /dev/block/sde7 abl_a.img
adb pull /dev/block/sde28 abl_b.img
adb pull /dev/block/sde10 akmu_a.img
adb pull /dev/block/sde31 akmu_b.img
adb pull /dev/block/sde1 aop_a.img
adb pull /dev/block/sde22 aop_b.img
adb pull /dev/block/sde46 apdp.img
adb pull /dev/block/sde11 boot_a.img
adb pull /dev/block/sde32 boot_b.img
adb pull /dev/block/sda16 carrier.img
adb pull /dev/block/sdd2 cdt.img
adb pull /dev/block/sde13 cmnlib64_a.img
adb pull /dev/block/sde34 cmnlib64_b.img
adb pull /dev/block/sde12 cmnlib_a.img
adb pull /dev/block/sde33 cmnlib_b.img
adb pull /dev/block/sdd3 ddr.img
adb pull /dev/block/sde14 devcfg_a.img
adb pull /dev/block/sde35 devcfg_b.img
adb pull /dev/block/sde44 devinfo.img
adb pull /dev/block/sde45 dip.img
adb pull /dev/block/sda2 drm.img
adb pull /dev/block/sde8 dsp_a.img
adb pull /dev/block/sde29 dsp_b.img
adb pull /dev/block/sde18 dtbo_a.img
adb pull /dev/block/sde39 dtbo_b.img
adb pull /dev/block/sda10 eksst.img
adb pull /dev/block/sda15 els.img
adb pull /dev/block/sda9 encrypt.img
adb pull /dev/block/sda12 fota.img
adb pull /dev/block/sdg1 frp.img
adb pull /dev/block/sdf5 fsc.img
adb pull /dev/block/sdf4 fsg.img
adb pull /dev/block/sda7 ftm.img
adb pull /dev/block/sda27 grow.img
adb pull /dev/block/sde3 hyp_a.img
adb pull /dev/block/sde24 hyp_b.img
adb pull /dev/block/sde9 keymaster_a.img
adb pull /dev/block/sde30 keymaster_b.img
adb pull /dev/block/sde16 laf_a.img
adb pull /dev/block/sde37 laf_b.img
adb pull /dev/block/sde49 limits.img
adb pull /dev/block/sde53 logdump.img
adb pull /dev/block/sde51 logfs.img
adb pull /dev/block/sde6 mdtp_a.img
adb pull /dev/block/sde27 mdtp_b.img
adb pull /dev/block/sde5 mdtpsecapp_a.img
adb pull /dev/block/sde26 mdtpsecapp_b.img
adb pull /dev/block/sda6 misc.img
adb pull /dev/block/sde4 modem_a.img
adb pull /dev/block/sde25 modem_b.img
adb pull /dev/block/sdf2 modemst1.img
adb pull /dev/block/sdf3 modemst2.img
adb pull /dev/block/sda1 mpt.img
adb pull /dev/block/sde47 msadp.img
adb pull /dev/block/sda18 oem_a.img
adb pull /dev/block/sda19 oem_b.img
adb pull /dev/block/sda17 persdata.img
adb pull /dev/block/sda5 persist.img
adb pull /dev/block/sda8 power.img
adb pull /dev/block/sda14 pstore.img
adb pull /dev/block/sde15 qupfw_a.img
adb pull /dev/block/sde36 qupfw_b.img
adb pull /dev/block/sde20 raw_resources_a.img
adb pull /dev/block/sde41 raw_resources_b.img
adb pull /dev/block/sda11 rct.img
adb pull /dev/block/sda sda.img
adb pull /dev/block/sdb sdb.img
adb pull /dev/block/sdc sdc.img
adb pull /dev/block/sdd sdd.img
adb pull /dev/block/sde sde.img
adb pull /dev/block/sdf sdf.img
adb pull /dev/block/sdg sdg.img
adb pull /dev/block/sde43 sec.img
adb pull /dev/block/sde21 sid_a.img
adb pull /dev/block/sde42 sid_b.img
adb pull /dev/block/sda3 sns.img
adb pull /dev/block/sde48 spunvm.img
adb pull /dev/block/sda13 srtc.img
adb pull /dev/block/sda4 ssd.img
adb pull /dev/block/sde52 sti.img
adb pull /dev/block/sde19 storsec_a.img
adb pull /dev/block/sde40 storsec_b.img
adb pull /dev/block/sda22 system_a.img
adb pull /dev/block/sda23 system_b.img
adb pull /dev/block/sde50 toolsfv.img
adb pull /dev/block/sde2 tz_a.img
adb pull /dev/block/sde23 tz_b.img
adb pull /dev/block/sda26 userdata.img
adb pull /dev/block/sde17 vbmeta_a.img
adb pull /dev/block/sde38 vbmeta_b.img
adb pull /dev/block/sda20 vendor_a.img
adb pull /dev/block/sda21 vendor_b.img
adb pull /dev/block/sdb1 xbl_a.img
adb pull /dev/block/sdc1 xbl_b.img
adb pull /dev/block/sdb2 xbl_config_a.img
adb pull /dev/block/sdc2 xbl_config_b.img

Máy mình tên là LM-G710 Lần đầu mình cài rom tùy chỉnh thì được nhưng khi cài 1 rom tùy chỉnh bị lỗi rồi cài Rom tùy chỉnh khác đều bị lỗi Wifi bạn có cách nào khắc phục lỗi đó không?

Anhrose said:
Máy mình tên là LM-G710 Lần đầu mình cài rom tùy chỉnh thì được nhưng khi cài 1 rom tùy chỉnh bị lỗi rồi cài Rom tùy chỉnh khác đều bị lỗi Wifi bạn có cách nào khắc phục lỗi đó không?
Click to expand...
Click to collapse
Check IMEI trước cái xem chính xác là máy gì.
Result of check IMEI
Check IMEI LG, Download Firmware ROM KDZ Free and Max speed from LGROM.com
lgrom.com
Rồi cài full rom lại thử bằng LGROMUP đi bạn.
LGROMUP 1.1 - Flash LG KDZ and some helpful functions
LG ROM is a library ROM KDZ Firmware for all LG phone. You can download with best speed and free. You can check IMEI to information also
lgrom.com

nttuan said:
Kiểm tra IMEI trước cái xem chính xác là gì.
[URL Unurl = "true"] https://lgrom.com/imei [/ URL]
Sau đó, hãy thử lại rom đầy đủ bằng LGROMUP đi bạn.
[URL opensurl = "true"] https://lgrom.com/blog/lgromup [/ URL]
Click to expand...
Click to collapse
I have tried the correct firmware version but still the error Someone said it was because of the partition (my device is a Korean machine when loading EU Rom, there is still Vietnamese language)

I have tried the correct firmware version but still the error Someone said it was because of the partition (my device is a Korean machine when loading EU Rom, there is still Vietnamese language)

Mình cũng đang xài bản Hàn. Mình xài bản rom này rất tốt nè.
LG G710EMW | LG G7 ThinQ | Version: G710EMW30f_00_0915 | Firmware for Region: AUS from AUSTRALIA - Lg-firmwares.com
LG G710EMW Download the latest version of firmware | OS Version: Android 10 Q | Firmware version: G710EMW30f_00_0915 | AUS - Fan club LG-firmwares
lg-firmwares.com
Bạn dùng LGROMUP flash lại thử đi. LGROMUP nó flash toàn bộ phân vùng máy lại trắng như mới xuất xưởng luôn.

nttuan said:
Check IMEI trước cái xem chính xác là máy gì.
Result of check IMEI
Check IMEI LG, Download Firmware ROM KDZ Free and Max speed from LGROM.com
lgrom.com
Rồi cài full rom lại thử bằng LGROMUP đi bạn.
LGROMUP 1.1 - Flash LG KDZ and some helpful functions
LG ROM is a library ROM KDZ Firmware for all LG phone. You can download with best speed and free. You can check IMEI to information also
lgrom.com
Click to expand...
Click to collapse
nttuan said:
Mình cũng đang xài bản Hàn. Mình xài bản rom này rất tốt nè.
LG G710EMW | LG G7 ThinQ | Version: G710EMW30f_00_0915 | Firmware for Region: AUS from AUSTRALIA - Lg-firmwares.com
LG G710EMW Download the latest version of firmware | OS Version: Android 10 Q | Firmware version: G710EMW30f_00_0915 | AUS - Fan club LG-firmwares
lg-firmwares.com
Bạn dùng LGROMUP flash lại thử đi. LGROMUP nó flash toàn bộ phân vùng máy lại trắng như mới xuất xưởng luôn.
Click to expand...
Click to collapse
Mk thử nhiều rồi bạn ạ
Vẫn lỗi

nttuan said:
Mình cũng đang xài bản Hàn. Mình xài bản rom này rất tốt nè.
LG G710EMW | LG G7 ThinQ | Version: G710EMW30f_00_0915 | Firmware for Region: AUS from AUSTRALIA - Lg-firmwares.com
LG G710EMW Download the latest version of firmware | OS Version: Android 10 Q | Firmware version: G710EMW30f_00_0915 | AUS - Fan club LG-firmwares
lg-firmwares.com
Bạn dùng LGROMUP flash lại thử đi. LGROMUP nó flash toàn bộ phân vùng máy lại trắng như mới xuất xưởng luôn.
Click to expand...
Click to collapse
Mk thử lgUP lguprom lgcmd rồi phân vùng nó vẫn ở bản hàn

Root redmi 9

quiero rootear mi Redmi 9a, pero cuál recovery es el adecuado que me ayude ?

unlock bootloader, flash twrp (or similar) recovery in fastboot, boot to recovery, factory reset, format data, flash ROM, boot to android, install magisk manager, patch boot in magisk manager, go to recovery, flash patched boot

Jose Luis Sanch Red. said:
quiero rootear mi Redmi 9a, pero cuál recovery es el adecuado que me ayude?
Click to expand...
Click to collapse
this method if you do not want to flash the recovery
-------------------------------------------------- ------------------------------
английский
-------------------------------------------------- ------------------------------
это подходит для тех у кого есть заблокированный загрузчик и разблокированный загрузчик
1. скачать официальную прошивку
2. находим BOOT.img переносим его на телефон в любую папку
3. загрузите последнюю версию Magisk
4. нажимаем установить, выбираем BOOT.img куда переносили
5. После прошивки BOOT.img подключите телефон к ПК и перенесите BOOT.img на рабочий стол.
6. Установите драйвер ADB, скачайте файл, который вы скачали
7. у вас есть папка adb на диске c
8. переносим BOOT.img в папку ADB
9. Переведите телефон в режим быстрой загрузки
10. открыть командную строку от имени администратора
11. Вставьте код в командную строку
12. Поздравляем, вы получили root
13. если ваш телефон перезагрузится, прошейте стоковый BOOT.img
-------------------------------------------------- ------------------------------
Русский
-------------------------------------------------- --------------
---------------
этот способ если не хотите прошивать рекавери
это подходит для тех у кого есть заблокированный загрузчик и разблокированный загрузчик
1. качаем официальную прошивку
2. находим BOOT.img переносим его на телефон в любую папку
3. скачать последнюю версию Magisk
4. нажимаем установить, выбираем BOOT.img куда вы перенесли
5. После того, как вы прошили BOOT.img, подключите телефон к ПК и перенесите BOOT.img на рабочий стол.
6. Установите драйвер ADB, скачайте файл, который вы скинули
7. у вас есть папка adb на диске c
8. переносим BOOT.img в папку ADB
9. Переведите телефон в режим быстрой загрузки
10. открыть командную строку от имени администратора
11. Вставьте код в командную строку
12. Поздравляем, вы получили root
13. если ваш телефон перезагрузится, прошейте стоковый BOOT.img
-------------------------------------------------- -----------------------------
код командной строки:
1. компакт-диск c:\ADB
2. устройства быстрой загрузки
3. fastboot flash boot boot.img
4. перезагрузка фастбут
-------------------------------------------------- -----------------------------

тут скачать adb драйвер
download adb driver here
adb-setup-1.4.3.exe
drive.google.com

Flash magisk.zip via custom recovery