Specially for Android 10 (Q) disliker's! - Xiaomi Mi A2 Lite Guides, News, & Discussion

* If you don't like Q because of extremely apps killing, there is working fix in this thread.
* If you don't like Q because of non presented call recording, there is fully working github app... with feature to switch on/off from top bar
* If you found any issues with other harware laggs, so... Sorry, you are unlucky, sometimes our devices have different hardware.
* Gcam mods can fix all yors dreems adding hdr+, you just need to choose the best for you (new versions doesn't working with front cam)
* Please stop promoting android 8/9... Device is old, all choice ap to you! Development was stopped about one yer ago, security updates placing Google inc. because of project AndroidONE!

Can I have the link for the audio recording please?

seda34 said:
Can I have the link for the audio recording please?
Click to expand...
Click to collapse
Axet's Call Recorder (ACR) F-Droid link
Should be available as addon in magisk also.

Could you please post the solution of this?
* If you don't like Q because of extremely apps killing, there is working fix in this thread.

Kaimilo said:
Could you please post the solution of this?
* If you don't like Q because of extremely apps killing, there is working fix in this thread.
Click to expand...
Click to collapse
root-stop-system-from-killing-apps
hKtweaks_2.2.0.apk
kernel-dragonheart-caf-3-18

mr.onegin said:
root-stop-system-from-killing-apps
hKtweaks_2.2.0.apk
kernel-dragonheart-caf-3-18
Click to expand...
Click to collapse
That tweaks don't work, you can see me that i have already tried
It just makes that you have to reboot every 3 days instead of each day

Kaimilo said:
That tweaks don't work, you can see me that i have already tried
It just makes that you have to reboot every 3 days instead of each day
Click to expand...
Click to collapse
Everything works if you disable 'Adaptive Low Memory Killer' in app or by termux method, must be rooted or flash custom kernel... No more updates will be present.

mr.onegin said:
Everything works if you disable 'Adaptive Low Memory Killer' in app or by termux method, must be rooted or flash custom kernel... No more updates will be present.
Click to expand...
Click to collapse
Nop, it doesn't, your system will become extremely slow after 3 days and you will need to restart

Kaimilo said:
Nop, it doesn't, your system will become extremely slow after 3 days and you will need to restart
Click to expand...
Click to collapse
Always used KillApps for first tweak, second one (kernel) working as should without any tweaks... Problem is in stock kernel not in system or hardware.

mr.onegin said:
Always used KillApps for first tweak, second one (kernel) working as should without any tweaks... Problem is in stock kernel not in system or hardware.
Click to expand...
Click to collapse
even after using kernels like sleepy kernel or dragon it worked really bad after some days

Kaimilo said:
even after using kernels like sleepy kernel or dragon it worked really bad after some days
Click to expand...
Click to collapse
Have you tried newer versions of this kernel? I was surprised but he still updating it... SourceForge link and I really don't know why he doesn't updating his own post here and even github source. Translated changes from another trusted forum:
Spoiler: 4pda
• kernel with dt2w (goodix-tp and fts_ts supported)
• gpu patches to improve the responsiveness of the interface
• gpu patches to optimize power saving
• removed unused modules
• a certain amount of spam in the logs has been disabled
• the logic of the clusters has been redesigned
• removed automatic shutdown of CPU cores at <5% charge
• slightly reconfigured interactive scheduler for optimization
• added flydemand scheduler, aimed at fast responsiveness
• gpu simple_ondemand tuned slightly more power saving
• added support for nintendo switch controller and other hid devices
• reworked work with memory (swap, lmk and background services)
• the installer no longer installs anything superfluous,
only the kernel and initialization script to the vendor
Link to his own post and looks like it is the same person under different nickname!

mr.onegin said:
Have you tried newer versions of this kernel? I was surprised but he still updating it... SourceForge link and I really don't know why he doesn't updating his own post here and even github source. Translated changes from another trusted forum:
Spoiler: 4pda
• kernel with dt2w (goodix-tp and fts_ts supported)
• gpu patches to improve the responsiveness of the interface
• gpu patches to optimize power saving
• removed unused modules
• a certain amount of spam in the logs has been disabled
• the logic of the clusters has been redesigned
• removed automatic shutdown of CPU cores at <5% charge
• slightly reconfigured interactive scheduler for optimization
• added flydemand scheduler, aimed at fast responsiveness
• gpu simple_ondemand tuned slightly more power saving
• added support for nintendo switch controller and other hid devices
• reworked work with memory (swap, lmk and background services)
• the installer no longer installs anything superfluous,
only the kernel and initialization script to the vendor
Link to his own post and looks like it is the same person under different nickname!
Click to expand...
Click to collapse
i didn't tried i don't have time to have a phone that is not ready to run
Maybe in a month i will try, just by curiosity can you give me the info about which version do you have? Like is it 32/3 or 64/4 and the memory vendor is samsung or micron?

Kaimilo said:
i didn't tried i don't have time to have a phone that is not ready to run
Maybe in a month i will try, just by curiosity can you give me the info about which version do you have? Like is it 32/3 or 64/4 and the memory vendor is samsung or micron?
Click to expand...
Click to collapse
I have a Micron 4/64

Hi
is there a working camera2 magisk module
i tried almost everything i found
V11.0.21.0.QDLMIXM - Magisk v23.0
an alternative but I can't access
{Mod edit: Link removed}
thanks

mr.onegin said:
Link to his own post and looks like it is the same person under different nickname!
Click to expand...
Click to collapse
seda34 said:
Hi
is there a working camera2 magisk module
i tried almost everything i found
V11.0.21.0.QDLMIXM - Magisk v23.0
an alternative but I can't access
{Mod edit: Link removed}
thanks
Click to expand...
Click to collapse
Hello and good morning, @mr.onegin @seda34
I've removed the links to 4pda from your above quoted posts! 4pda is not only another phone related website (and not at all affiliated with xda-developers) but also well known for the distribution of malware and warez. Links or references to 4pda are not accepted on XDA.
XDA Forum Rules (excerpt):
...
6. Do not post or request warez.
If a piece of software requires you to pay to use it, then pay for it. We do not accept warez nor do we permit members to request, post, promote or describe ways in which warez, cracks, serial codes or other means of avoiding payment, can be obtained or used. This is a site of developers, i.e. the sort of people who create such software. When you cheat a software developer, you cheat us as a community.
(...)
11. Don’t post with the intention of selling something.
Don’t use XDA to advertise your product or service. Proprietors of for-pay products or services, may use XDA to get feedback, provide beta access, or a free version of their product for XDA users and to offer support, but not to post with the intention of selling. This includes promoting sites similar / substantially similar to XDA-Developers.com.
Do not post press releases, announcements, links to trial software or commercial services, unless you’re posting an exclusive release for XDA-Developers.com.
Encouraging members to participate in forum activities on other phone related sites is prohibited.
Off-site downloads are permitted if the site is non-commercial and does not require registration.
Off-site downloads from sites requiring registration are NOT encouraged but may be permitted if both of the following conditions are met:
A) The site belongs to a member of XDA-Developers with at least 1500 posts and 2 years membership, who actively maintains an XDA-Developers support thread(s) / posts, related to the download.
B) The site is a relatively small, personal website without commercial advertising / links (i.e. not a competitor forum-based site with purposes and aims similar to those of XDA-Developers.com.)
...
Click to expand...
Click to collapse
Please refrain from sharing of such links in future! Thanks for your cooperation.
Regards
Oswald Boelcke
Senior Moderator

Related

SEEDER [ Lag Reduction APP ]

ONLY FOR ROOT USERS
GUYSS This is a App Called Seeder . This App Is Used For Reducing Lags in Phone (Like in Games etc.)
INSTRUCTIONS : INSTall The App & Press ON Button It Will Be Automatically Reduce Lags In Ur Phone
_______________________________________________________________________________________________________________________
Lag reduction for ROOT USERS ONLY!
Many Android tasks run slower than they should for one simple, yet not-so-obvious reason: they consume large amounts of random data from a limited source. Random data is used to generate session keys and unique identifiers, in SSL and wifi, while starting processes, and during inter-process communication.
This data (entropy) runs out frequently, and that causes processes reading from the blocking device (if any) to temporarily stop responding (lag). These processes cannot continue until the Linux kernel repopulates the entropy pool, which takes time. In addition, input events are pulled from the user interface (to refill the pool), which may also contribute to the problem.
Seeder is a service for root users. It assists the kernel in "topping off" the entropy pool by re-seeding it with data from the non-blocking (high performance) random device. Optionally, it can also help alleviate MMC I/O contention by extending the I/O queue, allowing the I/O scheduler to make better decisions, and combine more writes.
On some devices, applications load significantly faster (particularly large ones like Facebook, Chrome, and Youtube), and task switching becomes effortless. Fewer visual "hiccups" occur.
You MUST be running a rooted device to use this application! If you don't know what this means, Seeder will probably not work on your device!
MOD Edit: Please download from here: http://forum.xda-developers.com/show....php?t=1987032
buddy this is not ur work right???
then according to the rules
12. Using the work of others.
If you are developing something that is based on the work of another Member, you MUST first seek their permission, and you must give credit to the member whose work you used. If a dispute occurs about who developed / created a piece of work, first try to settle the matter by private message and NOT in open forum. If this fails then you may contact a moderator with clear evidence that the work was created by you.
Convincing evidence will result in copied work being removed. If there is no clear evidence you created the work then in the spirit of sharing all work will remain posted on the forums.
As an addition, developers have the right to hold exclusivity over their work for as long as it is deemed necessary by the dev or freely share it. However, if the work is claimed as exclusive, it must remain as such. No selective sharing will be allowed (ie allowing certain people to use it and not others). Should the dev decide to start sharing the work with others, the work automatically becomes fair game for all to use.
In regards to permissions, same rules remain for this but if permission was already given, unless there is a very valid reason, it cannot be revoked (same applies to major updates on the work). Under that same premise, permissions cannot be denied unless the work is exclusive or under severe circumstances.
In plain English: If you want to keep your work exclusive, go for it. However, if you are going to share your work, do it fairly.
These rules apply to all software posted on XDA (including but not limited to ROMs, RUUs, apps, games, kernels, themes, icons, etc) unless that software comes with a license that waives these rules.
Click to expand...
Click to collapse
and here is the original thread http://forum.xda-developers.com/showthread.php?t=1987032 by @lambgx02 in android development and hacking so its of no use for creating multiple thread in all mobile forums
Yess.. This Is Not Mine Work
tejkkarani said:
buddy this is not ur work right???
then according to the rules
and here is the original thread http://forum.xda-developers.com/showthread.php?t=1987032 by @lambgx02 in android development and hacking so its of no use for creating multiple thread in all mobile forums
Click to expand...
Click to collapse
Yupp Its True This is Not Mine Work. Im Just Share This App :angel:

Enhanced Privacy, Security and Battery Duration! My Measures...

Purpose: To share my personal experiences how I achieved an enhancement of my battery’s life, privacy and security.
INDEX:
Post #1 - General Statements, ROM and Kernel.
Post #2 - Privacy Measures and Considerations.
Post #3 – Better Battery Stats.
Post #4 – Greenify.
Post #5 – Amplify.
Post #6 – Power Nap
Post #7 – AppOpsXposed
THE BASICS:
Please read the XDA Forum Rules provided by @MikeChannon; from my personal point of view a definite MUST READ for everybody who intends to post on XDA or to contribute to this great site. Other MUST READ's I certainly recommend to everybody who wants to "breathe" what I believe the spirit of XDA is, are the following posts:
Forum Etiquette by @TheByteSmasher,
http://forum.xda-developers.com/showpost.php?p=16682226&postcount=2441 by @zelendel, and last but not least
http://forum.xda-developers.com/showpost.php?p=2031989&postcount=44 by @kyphur.
Do me the favour and really inhale what I just linked above!
Disclaimer:
Your device requires to be rooted, and in most cases that the Xposed framework is installed, too.
I am not responsible for any damages to your device if you follow any of the suggestions or my experiences provided in this thread.
If you do your warranty is now void. I am not responsible for bricked devices, dead SD cards, thermonuclear war, or if you’re getting fired because the alarm app failed. Please do some research if you have any concerns about features mentioned in this thread before flashing anything! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Whatever you do, before you do it ensure you save a NANDROID backup. If you don’t know what this means you’d probably rather discontinue further reading. Alternatively, you might want to start reading this and then return: What is?Boot loader,custom roms, CWM, modem, kernel?? by @esimon311.
Background: In December 2015, I got a used SGS 3 LTE that was running on CM 10. Immediately, I started to search for others ROMs especially on XDA (actually my first contact with this fantastic forum), thoroughly read the OPs and the subsequent posts, flashed and tried a few of them, till I've ended up in the configuration I'm now using for nearly nine months (details are available in the hidden part of my signature). I'm extremely happy, and my phone completely fulfils my requirements and desire; thanks to @rodman01, the dev of "my" ROM, I certainly don't need a different phone.
I'm quite "paranoid" in regard to privacy i.e. I don't and won't ever use things like FB, Whatsapp etc., and I’m not having experiences with them. Privacy is also my main driver to have my devices to only carry a minimalist suite of Google (“pico” and even some of that crap uninstalled) because I only use Play Store (unfortunately, some of my favourite apps incl. their betas are only available there) and broad location. If I'd get MicroG to run on my device Google had already been totally eliminated.
Desired End State: A device, which runs in a well-balanced ratio between battery endurance or drainage and performance specific to my objectives.
Criteria for Success: Battery lasts at least for 36 hours while all functionalities in regard to the objectives are applied; no unintended or random reboots occurring; no frozen screen.
Own Centre of Gravity: Maximum privacy.
Objectives:
Phone calls 24 hours per day, 7 days a week (24/7).
Text messaging 24/7.
Email reception and transmission 24/7.
Email and messenger encryption.
No “social networks” at all unless provider fulfils all privacy requirements.
No “messenger” except “Signal” but Signal 24/7.
All what can be accessed via a (slim line) browser, will be accessed via browser but not via dedicated applications.
If possible and achievable, no use of any Google “tool” or service.
If possible, no use of Chinese or Russian “products” or from any other country of “similar quality”. If unavoidable to use such a product, no WiFi, mobile data, or VPN access at all; all private or confidential data will be spoofed.
Control of access to private or confidential data like contacts, calendar, location, telephone number, IMEI etc. Spoofing as access control is acceptable.
Control of permissions only via ROM tools.
Control of broadcast receivers, services, wakelocks, and alarms.
Battery endurance of at least 24 hours.
Scenario: Remote location close to a national border with low 4G and 3G reception, even GSM reception occasionally weak and weather depending. No gaming at all.
Initial Steps: As stated above at background, I quite intensively and thoroughly scanned XDA for a ROM that could suit me; reading at least all the Ops but screened the respective thread, too. I finally but quickly found my desired one with [ROM][6.0.1][i9305 OFFICIAL] Resurrection Remix® M by @rodman01 in April 2016; it became my daily driver, and I’m using it till today.
Very fast, I concluded that performance of my phone might be enhanced by replacing the stock ROM kernel by a custom one i.e. I commenced the same search for a suitable kernel as I did for the ROM. Please be aware that kernel totally depend on the device and highly on the ROM. Read extremely thoroughly through the respective OP of the kernel you’ve in mind and get a clear indication if the kernel is really suitable for your device and your ROM. Even then, there might be more than one version available (as it’s the case for my current kernel); simply try, which one runs the best on your phone but also study the thread – others might have already shared experiences.
Next step was to experiment with the kernel settings especially the governor, governor and GPU frequencies and under-voltage. It became a try-and-error process including frozen locked screens and unintended reboots but the result was worth the torture. I was able to find kernel settings in accordance with my objectives especially improving the battery duration. I found the following thread extremely helpful in working out “my” kernel settings: [REF][GUIDE]Most up to date guide on CPU governors, I/O schedulers and more! by @Saber. If you search the thread of my kernel but also the Q&A section of my ROM you’ll certainly able to find some of the experiences I tried to share. Attached is a zip-file with screenshots of my current kernel settings.
Please be aware that not all kernel come with the same types or number of available governors. Some come with a dedicated control tool, some use the tool e.g. provided by the ROM; and as this would be off-topic and isn’t important to me, some offer different sound control like “boeffla”. Unless you’re on AGNi like me with its own AGNi Control application or on another kernel with its own control tool, I’ve very good own experiences with a tool called [APP] [4.0+] Kernel Adiutor by @Grarak. From my point of view, besides the marginal ROM settings to decrease battery drainage, installation of the right kernel and manipulation of its settings were the first major step to enhance my battery’s life!
Soon, I realised there are two versions of my ROM available, the “regular” one but also a so called “Sammy version” (for those who are interested, the differences are explained in post #3 of the above linked Resurrection Remix thread). I converted to the Sammy version and was impressed; first, how smooth my device performed “on Sammy” but second and more important to me that battery charging was much faster.
Nonetheless, if required I'm tweaking my system by tools like [APP] [4.0.3+] L SPEED Android tweaking APP by @Paget96 and keep it clean and tidy by [APP][1.6+] SD Maid - System cleaning tool by @Dark3n. SD Maid additionally offered me the possibility to easily control the “autostart” behaviour of my installed applications; however, there are certainly other tools available for this purpose e.g. My Android Tools that I'm also mentioning in post #2 for another reason.
Please be advised that for all somewhere in this thread mentioned applications or tools, I personally started using them with the recommended settings in their OPs if available i.e. you must thoroughly read them but eventually commenced to experiment with different settings until I achieved the results I wanted. This certainly also applies to the use of e.g. different governors or other kernel settings. I collected some of the guides and tutorials, which were very useful and supportive to me, in post #3 of this "How-to...". This whole thread is meant in conjunction with the SGS3 but some parts might be helpful even for your device.
EDIT (2016-11-11): If you experience WiFi drops you might be interested in experiences that @Wood Man is sharing with us, and he gratefully allowed me to quote him regarding WiFi drops that occured to him several times. It never happened to me because my setup was (just by accident) always different; however, if WiFi drops occur to you please have a look at this post. The explanation is so reasonable and makes so much sense from my point of view. Thanks very much to Wood Man for sharing his knowledge. I do mention this issue in this OP as I assume that these type of connected inteferences might even lead to a higher battery drainage in turn.
Last but not least a few words regarding Xposed – I apologise to the multiple XDA users who already know for covering this here but just by monitoring all the Xposed threads I’m convinced a lot of guys just don’t know. The Xposed framework in available in different versions pending e.g. on the brand of the device or its architecture, on the ROM respectively the Android SDK or if systemless root is used. I refrain from quoting all the different Xposed threads at this point; simply search the Xposed forum by yourself, and you certainly find the framework suitable to you. In the hidden part of my signature you can retrieve the Xposed version I’m using.
We talked about ROMs and kernels, now let’s mention the other key players for my satisfying battery endurance but as stated you certainly need Xposed:
BetterBatteryStats, Greenify, and Amplify, and PowerNap. EDIT (2016-11-11): Please refer to post #6 (about PowerNap) why I "removed" PowerNap.
I tried all of them, it worked out for me, and I'm continuing to use them; however, that what I stated in the paragraph above applies for them too: Comply with the recommendations and develop it further till you are satisfied.
EDIT (2016-11-19): If interested how I made my system GApps free, please check post #54.
Remarks:
If a donation option is available please consider to take advantage of this chance as you not only occasionally get a better capability but you're supporting the dev and the development.
None of the mentioned apps has got permission granted to the internet, and all are spoofed by XPrivacy. I'm pretty cautious regarding applications if so much power has been made available due to root and Xposed, and I always take their origins into consideration (a reason why I don't update my SuperSU anymore and continue to use SuperSU v2.76).
Occasionally, it's required to post you logs on XDA, and quite a few guys have problems with attaching files to their post; me too. In such a case, I suggest to try a different browser; I can only post all allowed attachments via Microsoft Edge and Chrome. FF, IE and Chrome doesn't allow for whatever reason; they even don't provide any possibility to select a file for upload. I have no experiences with XDA Labs. EDIT (2016-10-18): I don't know what changed a few minutes ago but I'm now able to use Chrome for the upload of files. Weird! Another option is to upload e.g. to http://hastebin.com and to post the link.
Now, you know more or less what I did to achieve a really good battery life.
ATTENTION: In accordance with my objectives
No so called "social network" applications (e.g. Whatsapp, Twitter, Instagram, Facebook or how you name them) at all are installed on my devices i.e. you couldn't find any settings/limitations regarding them.
All my described settings/limitations are in that way that no push notifications at all are allowed (because I want it this way). Every wakelock and alarm connected to Google Play Services (GPS) is somehow limited; not one is unlimited. Quite a few services of GPS and/or Google Services Framework (GSF) are disabled. Edited because all devices are GApps-free.
If you just copy my settings without any reflection do not wonder that all of your push notifications are (even extremely) delayed. If you require anything of above you need to play with your system yourself.
The following posts provide you with details of all the applications I use to monitor and to limit the drainage of my battery.
CREDITS: To everybody who I mentioned in this OP or the subsequent posts. If I forgot someone I apologise. Please let me know in this case or if you want to be more prominently given credit; I'm happy to immediately follow such a request!
Off topic comments are allowed as long they are generally related to the overall topic, are in the general interest of the followers of this thread and add value to the thread. The ultimate decision rests with me as the OP!
Privacy Measures and Considerations
You might be wondering why I post this and actually so far on top of this thread. As you can read above, I recognise maximum privacy as my centre of gravity (COG) i.e. everything needs to be done to defend the COG. Or in other words, without all the steps below, I wouldn’t be able to install and use some of the applications i.e. tools to decrease the drainage of my battery. The following measures and considerations are therefore the prerequisite to continue further.
Prevent Google's and other applications from "calling home” by controlling access to WiFi, mobile data (including roaming), or VPN through “AFWall+ (Donation)” and control effectiveness through Network Log.
EDIT (2016-11-18): Google is no longer an issue as I'm "GApps free" for some days, and I'm extremely happy with the performance of my system. If you are interested in more information please search this thread for "GApps free".
Limit all unnecessary use of services and broadcast receivers not only in support of privacy but also “to save fuel” e.g. by “MyAndroidTools”. As an example, here’s a link to one of my posts in a different thread, where I showed how to manipulate some broadcast receivers used by “Google Play Services” in order to decrease its wakelocks.
If using MM+ control of all permissions in the ROM settings granted to the installed applications including system applications. In the ROM privacy settings, by default don’t allow any application including system applications access to your private data; just grant this permission on a strict case-by-case policy if absolutely necessary. Check in the advanced privacy settings if the granted permissions correspond with your objectives. Use AppOpsXposed for additional implementations (refer to post #7).
XPrivacy - The ultimate, yet easy to use, privacy manager by @M66B. Actually, I deem XPrivacy to be the most powerful tool on an Android device to protect privacy. XPrivacy can only run on devices with an installed Xposed framework. XPrivacy doesn’t control permissions an application gets granted but is able to spoof all data that are made available to an application or are requested by it. The advantage of this method is that the application itself “believes” it’s correctly functioning whereas denial of a requested permission quite often leads to a force closure of the application.
XPrivacy isn’t only extremely powerful but also highly complex albeit easily to use from my point of view if you familiarised yourself sufficiently; however, this takes a bit of time but it’s the effort worth. And M66B has provided a very detailed user manual and FAQ tutorial.
And just to reiterate: Without the mentioned measures, I would personally never have installed some applications; to name them I leave it with your imaginations.
Remark: If someone decides to go for one or all of the mentioned applications please consider to use the donation versions (if available) or to donate to the developers in order to support them and the further development!
EDIT (2017-06-11): Due to the (hopefully only temporarily) non-availability of Xposed for Nougat, I had to terminate the utilisation of XPrivacy i.e. to try to use my brain more intensively. It's a pity.
If interested in Privacy, these two posts might be interesting to you: Post #64 and post #66.
Better Battery Stats
For me, it’s was immediately obvious that I needed to know how and what is when draining my battery before I could commence reducing the drainage. In order to monitor drainage of the battery, I finally learnt about [APP][2.1+][06 Sept. - V2.2RC3] BetterBatteryStats (BBS) by @chamonix.
BBS serves my personal requirements the best; the application is well maintained and supported by a really active XDA thread. BBS is also able to run on non-rooted devices; however, some modifications via ADB are required. As an example, I attached a BBS log but please be aware it isn’t really informative at all because I used the phone while logging was running. Clear guidance is in this thread [GUIDE] 0% [0.0%/h] Idle Battery Drain on Stock ROM (XPosed & Amplify Required!) of @Celestial Fury how the BBS log must be taken in order to provide valuable information for a diagnostic assessment of your battery’s drainage, literally it has to be an idle log. It’s also very helpful to establish first baselines for your device and its current battery i.e. for you to known how much is the battery draining even with the phone switched off and the next time when it’s not transmitting/receiving at all (i.e. in airplane mode).
EDIT (2017-06-08): From my point of view, this procedure by @Davey126 is the best way to achieve a suitable dump file.
Just for completeness: Besides the log (dump file), BBS is able to provide you simultaneously with a logcat and dmesg file. You can retrieve the logs by pressing on the "triangle sign" located in the middle between the refresh and the menu symbols (see screenshots).
EDIT (2016-10-13): Idle Dump attached. Drainage of 1.5%/h i.e. a theoretical battery duration of slightly more than 60 hours, which is fully in line with my given objectives, especially under consideration that neither K-9 Mail and ChompSMS nor Signal are hibernated. From my personal evaluation and conclusion - however, I'm happy to receive experts' opinions, nearly no partial wakelocks but the "standard" (at least from my point of view) kernel wakelocks. As you see at post #1, my kernel's settings are a fair compromise between battery savings and performance. I haven't had any frozen screen or unintentional reboot for month, which is equally important to me as a good battery duration. I doubt that I'm able to further minimise kernel wakelocks. Final remark: Within our home WiFi network, the phone has a fixed IP address assigned respectively reserved.
EDIT (2016-10-17): If you experience issue with "net scheduler wakelock" maybe my post here is interesting to you?
EDIT (2016-10-18): Again thanks to @Wood Man as already so often (eventually I believe he knows the whole XDA by heart) I've become aware of another thread dealing with "net scheduler" by @spencetj. Maybe this helps you in case of any problems e.g. this workaround.
Greenify
Greenify supports my objectives by “hibernating” most of my installed applications. The screenshots below are supposed you to show you the applications, which I haven’t “greenified”. What Greenify does respectively is supposed to achieve can be taken from the XDA threads. Please be aware that the thread regarding [APP][4.1+] Greenify v2.9 Final (Updated on Aug.1) has been closed by @oasisfeng; instead he opened this new one: [BETA] Greenify 2.9.5 beta 3 (Sep. 21, 2016) [BETA]. Please check the Greenify Forum for applicable threads.
Further guidance, actually the one I initially used, is also available in this guide: [GUIDE][26-07-2016]Extreme Battery Life Thread(Greenify+Amplify+Power Nap) by @v7.
EDIT (2019-01-02): Meanwhile, hibernation on Oreo and later seems to work nearly perfectly that Greenify is probably unnecessary in conjunction with these Android versions. However, no own personal experience as our devices are still and will remain on Nougat.
Amplify
By the use of Amplify, I manipulated wakelocks, alarms, and services connected to my installed applications. Using Amplify probably requires the most manual input of all other mentioned applications (except maybe MyAndroidTools and/or AppOpsXposed) but the outcome is tremendous in my opinion.
Amplify is available via this thread [Mod][Xposed] Amplify - Battery Extender - Control alarms, services, and wakelocks by @cryptyk who also nicely explains in his thread what wakelocks and alarms are.
My screenshots below (zipped due to their amount) are supposed to provide an impression, which wakelocks, alarms, and services I limited by Amplify; however, it’s a pity I can’t show you the exact settings for each one of them. Till today, I’ve been unable to figure out how to export or save my settings of Amplify.
EDIT (2016-10-12): Additionally, the attached xml-file contains my current Amplify limitations for those interested. I found it thanks to this post by @Sam Nakamura and the hint to it by @Davey126.
EDIT (2016-10-27): For completeness, I must mention that some highly experienced users e.g. @Davey126 are questioning the let's call it effectiveness of Amplify and from my understanding seem to achieve less drainage without the use of Amplify. If interested in these conversations I suggest to search for respective posts (e.g. by @Davey126) relevant threads. Some of his very valuable thoughts and paradigmatic attitude can be retrieved here.
In the very beginning, I initially took the settings suggested at [GUIDE][26-07-2016]Extreme Battery Life Thread(Greenify+Amplify+Power Nap) by @v7 but in turn continued to modify them more and more. Meanwhile, all Google Play Services related wakelocks and alarms are limited, by the way without any problems for me or my device; however, remember how limited my intended use of Google crap is (post #1).
@Celestial Fury provides very helpful guidance in his thread [GUIDE] 0% [0.0%/h] Idle Battery Drain on Stock ROM (XPosed & Amplify Required!) “[GUIDE] 0% [0.0%/h].
If you use the powerful XDA search engine it’s going to drag you to other valuable, sometimes specialised posts e.g. to this one: Getting rid of wlan_rx_wake wakelocks by @laxor.
EDIT (2016-10-31): Just in order to gain some own experiences, I uninstalled Amplify three days ago after resetting to its defaults. My intention was to observe battery drainage of my system without a running Amplify; everything else remained unchanged.
Observation: Within the two days, the system had higher battery loss of 1.5%/hour during idle without an installed Amplify compared to the values before with the running Amplify.
EDIT (2016-11-16): For two days now I'm GApps free!!! System is running thousand times smoother, fixing the location is very fast even without GPS, blanketstore does what it's supposed to do, and in a few days I'm going to observe my battery drainage more closely; just this morning resetted my Amplify statistics.
But talking Amplify: Obviously due to the lack of the original Google Play Store, it doesn't recognise my donation anymore i.e. no pro-features available and by this now useless to me. Most likely, I'm going to uninstall Amplify having also in mind that some very experienced guys like @Davey126 doubt its necessity anyway.
Alternatively, I hope that @Paget96 is eventually forking Amplify to his great application L SPEED.
Davey126 said:
FYI - I am Amplify free on most of my devices and have profited from reduced maintenance (monitoring/tweaking/optimising blocks) and undesirable side effects that often manifest in subtle ways. In some cases I accepted a modest increase in drain rates while still enjoying overall performance that ranks in the top 20% based on values reported here and similar threads. All day battery life is a must; no compromises there. Arguably drain rates improved a bit with the removal of Amplify but hard to isolate (hint: reset stats on occasion and observe results with no other changes). I do have Amplify running on a couple of older devices that rely on stock ROMs and tight Google Play Services integration. I find a minimal configuration works best with carefully selected conservative blocks (items/durations) along with a weekly stat reset.
Amplify continues to be a fine (albeit stagnant) tool with no apparent equal. It is the right solution for many who experience excessive battery drain and/or wake time due to unconstrained alarms/wakelocks. I prefer to go after these pups at the source which mitigates the need for Amplify.
Click to expand...
Click to collapse
EDIT (2017-04-14): A few weeks ago, I decide to no longer use Amplify as @Davey126's philosophy quoted above and below makes sense to me. Meanwhile, I'm able to fully concur to his deductions and conclusions.
Davey126 said:
I'm certainly no expert but take a different approach to wakelock management after spending am embarrassing amount of time with Amplify and similar tools. I don't limit anything that does not contribute to unwanted wake time and associated battery drain. That reduces the number of candidates from hundreds to a handful. From there I target the app/service/function vs going after wakelocks. For example I disable Firebase Analytics vs limiting/blocking the associated WLs. Currently enjoying 0.2%/hr idle drain will LTE, WiFi and location service on 7x24. Haven't used Amplify in months. Greenify and native Doze are my power management tools of choice on Android 6 w/Xposed. Also use MyAndroidTools and SD Maid to rein in a few rogue services and broadcast receivers. The rest is pure stock.
Bottom line: the vast majority of wakelocks are benign. It's the receiver that determines what actions, if any, will be taken.
Click to expand...
Click to collapse
Power Nap
Please allow me to phrase from [GUIDE][26-07-2016]Extreme Battery Life Thread(Greenify+Amplify+Power Nap) by @[I]v7[/I], as I couldn’t explain it better: “Power Nap for Xposed is the SONY's stamina mod for non-Sony devices. When your screen is off, Power Nap maximizes your device's deep sleep time by stopping services, alarms and wakelocks from waking the device when the screen is off. You can get notification from the apps you've whitelisted.” The application itself is still available here:; however, the corresponding XDA thread [MOD][APP][XPOSED][4.1+] Power Nap for Xposed - Sony's Stamina Mode for all devices! by @waylaidwanderer currently seems not to be very active because waylaidwanderer didn’t contribute since nearly April 2015 anymore. Anyhow, the application does its job from my point of view, and I amended this post by some screenshots of my applications on the whitelist.
EDIT (2016-10-22): @waylaidwanderer is back on air.
EDIT (2016-11-03): I was wondering if PowerNap really has an influence on the battery drainage of my device. For this reason, I uninstalled PowerNap and observed the power consumption for about two days. Attached is last night's idle dump. Actually, I wasn't able to detect any difference to the times when PowerNap was installed. I know my device is more than idling when asleep but this is due to my personal objectives; however, even without PowerNap I got a drainage of (in my opinion) only 1.1%/hour. My decision is now: I don't re-install PowerNap 'cause I don't require applications I don't benefit from in some way - less apps, much better.
AppOpsXposed
AppOpsXposed is a permission manager on Android, and by that you’re also able to deny permission to “keep awake” of e.g. Google Play Services, Google Services Framework, and other applications; However, I again suggest to look into the recommendations at [GUIDE][26-07-2016]Extreme Battery Life Thread(Greenify+Amplify+Power Nap) by @[I]v7[/I]. Actually, I used AppOpsXposed to re-check and to modify my advanced privacy settings of the ROM if required.
The application is available via its thread [Xposed][MOD][1.30.3] AppOpsXposed - AppOps for 4.3+ “[Xposed][MOD][1.30.3] by @caspase.
Spare #1
Spare #2
Spare #3
Wow and again wow!! :good: Congrats and many thanks for the time you spent
and the effort you did for such a contribution, the thread and the posts.
And also thanks for what you do and did for our beloved i9305 in this thread and all in all the other threads you participate. Thanks!! :good:
rodman01 said:
Wow and again wow!! :good: Congrats and many thanks for the time you spent
and the effort you did for such a contribution, the thread and the posts.
And also thanks for what you do and did for our beloved i9305 in this thread and all in all the other threads you participate. Thanks!! :good:
Click to expand...
Click to collapse
I'm surprised how many thanks you had available. Getting slightly embarrassed now; however, I believe it's my duty to share my experiences like so many others do on XDA. I learnt incredibly much from them. Superb community.
Anyhow, I not only guess - I know as soon as my wife left the hospital and is back home, I won't and actually don't want to spend the same amount of time at XDA as I did in the past.
You are welcome and all my best to and for your wife and you. Enjoy your life together and when she is back home and you find the way back to xda from time to time, we would appreciate it.
Wow, great thread! I'll be following this closely as I can only get 1.5 hours of SOT max with my current setup.
thanks man....apreciate
carlitobahsoun said:
thanks man....apreciate
Click to expand...
Click to collapse
If you like it I don't mind you'd hit the thanks button in the lower right corner of the OP and/or the post(s) helpful to you.
rodman01 said:
You are welcome and all my best to and for your wife and you. Enjoy your life together and when she is back home and you find the way back to xda from time to time, we would appreciate it.
Click to expand...
Click to collapse
You won't definitely lose me. I get so much out of XDA and its great community; you made such a great tool out of my device, and I want to see RR "N" (despite not knowing if or when I convert - RR v5.7.4 Sammy is running so smoothly. Shall I really change a well running engine?)
limjh16 said:
Wow, great thread! I'll be following this closely as I can only get 1.5 hours of SOT max with my current setup.
Click to expand...
Click to collapse
I'm convinced I'm going to further decrease my battery's drainage as soon as I'm able to modify my objectives: No requirement for 24/7 framework operations (calls, text messaging, email, messenger). And this will occur when my wife is returning home.
Well executed write up with a nice balance of general guidance and specific detail. Thanks for sharing your experiences; should prove a helpful starting point for those seeking tighter control and improved battery life from their devices.
Update of OP
OP Updated: Amended post #3 by an idle dump from BBS, and amended post #5 by my Amplify settings.
I hope both is interesting to check.
Update of Post #3
Added a remark regarding "net scheduler wakelock" to post #3.
EDIT (2016-10-18): Updated post #3 thanks to @Wood Man I've become aware of another thread dealing with "net scheduler" by @spencetj.
Gave all my thanks for today
Great guidance, hope i can improve my batterylife and SoT
I already followed most threads you suggested but this one sums up everything very nice and easy

[APP] Arc Lighting Navigation Bar

Hey everyone, Nathan here!
Today, I'm proud to present my app developed with Symetium Corporation.
The app is called Arc Lighting Navigation Bar - PC Style Taskbar and is now available on the Google Play Store.
The app allows you to completely override your existing navigation bar and in its place, have an insanely customizable Navigation Bar. In just half an hour of playing around with it, you can create themes similar to different versions of Windows, ChromeOS, Linux or literally anything you can imagine. The app has numerous indicators similar to our first app, Arc Lighting. In addition to that, you can set the icons of the buttons to various pre-selected images or even add your own. The app has different setup options for Android newbies and experts alike so, while extreme customization IS possible, it isn't too confusing.
Unfortunately, the app isn't completely free because we need to earn back some of the development costs as well as fund our upcoming projects, HOWEVER, you get 2 FREE HOURS of use and can watch short video advertisements in exchange for additional hours of time using the app. If you can't afford to purchase the app, we understand but would still love it if you would take a moment and try the app for an hour or two!
Also, stay tuned for announcements on how you can get the app for free. Our goal is to work with other media influencers and do giveaways to make sure anyone can get a chance to use the app!
Compatible Devices
At the moment, most devices are compatible. There are a few exceptions and a couple of known issues with certain devices.
1. All Samsung devices have an odd glitch that will force you to use Simple Mode. We are working on a fix for this issue.
2. A couple of tablets are known to have issues with the app so please reach out to me if you encounter this issue and we'll work on it asap
Download
The app can be found on the Google Play Store here:
mod edit - link removed
We would absolutely love for you take a bit of time and try it out. Feedback is extremely crucial to us at this stage of development so we'd love to hear back from you! Thanks for your time!
epicality said:
Unfortunately, the app isn't completely free because we need to earn back some of the development costs as well as fund our upcoming projects, HOWEVER, you get 2 FREE HOURS of use and can watch short video advertisements in exchange for additional hours of time using the app. If you can't afford to purchase the app, we understand but would still love it if you would take a moment and try the app for an hour or two!
Click to expand...
Click to collapse
Forum Rules
11. Don’t post with the intention of selling something.
Don’t use XDA to advertise your product or service. Proprietors of for-pay products or services, may use XDA to get feedback, provide beta access, or a free version of their product for XDA users and to offer support, but not to post with the intention of selling. This includes promoting sites similar / substantially similar to XDA-Developers.com.
Do not post press releases, announcements, links to trial software or commercial services, unless you’re posting an exclusive release for XDA-Developers.com.
Click to expand...
Click to collapse
reference
A Guide to Paid Work on XDA-Developers
[Announcement] Changes to the paid theme policy (25-JULY-2015)
Paid Software Announcement and Discussion
Read BEFORE Creating a New Thread ** **UPDATED 12-Apr
thread closed

[CLOSED]Whatsapp Plus App Update new version free for Android

{Mod Edit} Latest Version will bring many improvements and new features. Some of them can be seen below:
• New Video Downloader - New update will allow you to download videos from WhatsApp platform. You can use this feature if you want to save watched videos on WhatsApp for later use.
• Delete messages after being read - People always want to make sure that messages are delivered to and read by the person on the other end of the line.
• Allows you to use WhatsApp easier with more privacy options.
• You can hide your online status
• You can also customize your own theme or choose between more than 1000 amazing themes in various colors
• Updated with more interface options
• New and unique app icon
• Support to send PDF , JPG , PNG ,WAV, MP3, OGG . file formats
@WallaceWest
Thread closed! Due to a DMCA of Whatsapp, Whatsapp mods are not accepted on XDA:
Notices/ipla-2013-07-22.md at master · xda/Notices
Legal notices (including DMCA Takedown notices, other legal takedown letters) sent to XDA Developers - Notices/ipla-2013-07-22.md at master · xda/Notices
github.com
XDA Forum Rules (excerpt):
9. Don't get us into trouble.
Don't post copyrighted materials or do other things which will obviously lead to legal trouble. If you wouldn't do it on your own homepage, you probably shouldn't do it here either. This does not mean that we agree with everything that the software piracy lobby try to impose on us. It simply means that you cannot break any laws here, since we'll end up dealing with the legal hassle caused by you. Please use common sense: respect the forum, its users and those that write great code.
Click to expand...
Click to collapse
Regards
Oswald Boelcke
Senior Moderator

[KERNEL][x52x][ANDROID 11R] Ballistic kernel with NetHunter support

Ballistic kernel ​
Author: @trottling (@lil_trottling)
Date of update: 09.06.2022
Status: in development
Version: 1.1
Features:
NetHunter support (HID not working due to kernel version 3.10.108)
CPU/GPU voltage control
All cores are used at boot time
FSync support
Optimized task search
Traction control
Increased preemptive reads to 512KB
Added simple API to query screen status
Running Mako Hotplug
New schedulers:
Zen V2
Maple
Sio
Fiops
New governors:
Relaxed
Ironactive
bioshock
blu_active
hyper
barry_allen
impulse
ondemandplus
lionheart
interactivex
electrodemand
interactive_pro
intelliactive
intellidemand
dancedance
lionfish
pegasusq
smartmax
yankactive
zzmoove
Sources:
The kernel core is github.com/tImIbreakdown/android_kernel_leeco_msm8976/tree/lineage-18.1
Governors - github.com/anonymous2ch/android_kernel_leeco_msm8976 and github.com/Anubioz/android_kernel_leeco_msm8976
Something else is out there - github.com/ajayrawat2523/android_kernel_leeco_msm8976-1
Bugs:
VDD driver doesn't allow to set CPU frequency lower than 1017mgz - it can be solved by turning it off
I haven't tested the entire kernel, there may be more.
Installing:
Flash via the recovery.
Need magisk
Customise your kernel, it can't be perfect for everything at once from the archive
Anything and everything forum.xda-developers.com/t/ref-guide-most-up-to-date-guide-on-cpu-governors-i-o-schedulers-and-more.3048957/
4PDA Post {Mod edit: Link removed}
Translated with DeepL
trottling said:
Customise your kernel, it can't be perfect for everything at once from the archive
Anything and everything forum.xda-developers.com/t/ref-guide-most-up-to-date-guide-on-cpu-governors-i-o-schedulers-and-more.3048957/
4PDA Post {Mod edit: Link removed}
Translated with DeepL
Click to expand...
Click to collapse
@trottling
I've removed the link to 4pda!
4pda is not only another phone related website (and not at all affiliated with xda-developers) but also well known for the distribution of malware and warez. Links to 4pda are not accepted on XDA.
XDA Forum Rules (excerpt):
...
6. Do not post or request warez.
If a piece of software requires you to pay to use it, then pay for it. We do not accept warez nor do we permit members to request, post, promote or describe ways in which warez, cracks, serial codes or other means of avoiding payment, can be obtained or used. This is a site of developers, i.e. the sort of people who create such software. When you cheat a software developer, you cheat us as a community.
(...)
11. Don’t post with the intention of selling something.
Don’t use XDA to advertise your product or service. Proprietors of for-pay products or services, may use XDA to get feedback, provide beta access, or a free version of their product for XDA users and to offer support, but not to post with the intention of selling. This includes promoting sites similar / substantially similar to XDA-Developers.com.
Do not post press releases, announcements, links to trial software or commercial services, unless you’re posting an exclusive release for XDA-Developers.com.
Encouraging members to participate in forum activities on other phone related sites is prohibited.
Off-site downloads are permitted if the site is non-commercial and does not require registration.
Off-site downloads from sites requiring registration are NOT encouraged but may be permitted if both of the following conditions are met:
A) The site belongs to a member of XDA-Developers with at least 1500 posts and 2 years membership, who actively maintains an XDA-Developers support thread(s) / posts, related to the download.
B) The site is a relatively small, personal website without commercial advertising / links (i.e. not a competitor forum-based site with purposes and aims similar to those of XDA-Developers.com.)
...
Click to expand...
Click to collapse
Regards
Oswald Boelcke
Senior Moderator
Good Work mate!
but... can it work on Android 10? due to almost same kernel sources
i don't have the smartphone to test
So, what I plan to add in the next release:
fixes of everything
voltage fix
adreno idler
fixes GPU governors
add more CPU governors
do something with hotplug
add tcp algorithms
maybe kcal
new drivers rtl8188eu from mfruba
Any suggestions? Write them here.
alonsoj636 said:
Good Work mate!
but... can it work on Android 10? due to almost same kernel sources
i don't have the smartphone to test
Click to expand...
Click to collapse
Theoretically, it should, like the SiemensCat kernel, I can't check it, since I'm already using android 11
Ballistic kernel V1.2 with NetHunter
Android 11(R), 10(Q) и 9(P)​New:
New governors
FIFO i/o
Dynamic Fsync
New TCP algorithms
Forced fast charging
KCAL
Adreno idler
Simple GPU algorithm
Download:
Kernel - below or https://disk.yandex.ru/d/3As20bpfehV0_A
RTL8188eus driver https://disk.yandex.ru/d/GoL27ARWbbHIiw"
hi bro, my devices ( leeco s2 , using rom project sakura 5.2 ) encountered a very slow charging situation, despite using the fast charging magisk module, the situation is still not resolved, hope you will respond soon.
Duyanhad54 said:
hi bro, my devices ( leeco s2 , using rom project sakura 5.2 ) encountered a very slow charging situation, despite using the fast charging magisk module, the situation is still not resolved, hope you will respond soon.
Click to expand...
Click to collapse
Forced fast charging doesn't work? Maybe you use weak charging?
trottling said:
Forced fast charging doesn't work? Maybe you use weak charging?
Click to expand...
Click to collapse
trottling said:
Forced fast charging doesn't work? Maybe you use weak charging?
Click to expand...
Click to collapse
i have changed a lot of different chargers, i have tried changing to xiaomi 18w charger, anker 18w but the problem is not solved, i think it's software, because my device after switching to custom rom has such problem
Duyanhad54 said:
i have changed a lot of different chargers, i have tried changing to xiaomi 18w charger, anker 18w but the problem is not solved, i think it's software, because my device after switching to custom rom has such problem
Click to expand...
Click to collapse
battery issues are typically sorted out by rebooting to the bootloader as it resets the battery's pmic. there's some more diagnostic steps like "dumpsys battery" you can read about here: https://c.mi.com/thread-2732945-1-0.html
trottling said:
Ballistic kernel ​
Author: @trottling (@lil_trottling)
Date of update: 09.06.2022
Status: in development
Version: 1.1
Features:
NetHunter support (HID not working due to kernel version 3.10.108)
CPU/GPU voltage control
All cores are used at boot time
FSync support
Optimized task search
Traction control
Increased preemptive reads to 512KB
Added simple API to query screen status
Running Mako Hotplug
New schedulers:
Zen V2
Maple
Sio
Fiops
New governors:
Relaxed
Ironactive
bioshock
blu_active
hyper
barry_allen
impulse
ondemandplus
lionheart
interactivex
electrodemand
interactive_pro
intelliactive
intellidemand
dancedance
lionfish
pegasusq
smartmax
yankactive
zzmoove
Sources:
The kernel core is github.com/tImIbreakdown/android_kernel_leeco_msm8976/tree/lineage-18.1
Governors - github.com/anonymous2ch/android_kernel_leeco_msm8976 and github.com/Anubioz/android_kernel_leeco_msm8976
Something else is out there - github.com/ajayrawat2523/android_kernel_leeco_msm8976-1
Bugs:
VDD driver doesn't allow to set CPU frequency lower than 1017mgz - it can be solved by turning it off
I haven't tested the entire kernel, there may be more.
Installing:
Flash via the recovery.
Need magisk
Customise your kernel, it can't be perfect for everything at once from the archive
Anything and everything forum.xda-developers.com/t/ref-guide-most-up-to-date-guide-on-cpu-governors-i-o-schedulers-and-more.3048957/
4PDA Post {Mod edit: Link removed}
Translated with DeepL
Click to expand...
Click to collapse
Bro I have slow charging issue and heating issue, please what do I do?

Categories

Resources