i flashed AICP and loved it so far but now i have the problem if i flash magisk it bootloops does anyone have an inside on why it bootloops and how to fix it
Sammy4798 said:
i flashed AICP and loved it so far but now i have the problem if i flash magisk it bootloops does anyone have an inside on why it bootloops and how to fix it
Click to expand...
Click to collapse
What's the ROM version? Which Magisk Version you used?
i have asked the creator which said magisk wont work on the rom
Recently I decided to play around with my retired xiaomi 4c which I bought in 2016/2017.
Firstly, I unlocked my phone and installed TWRP recovery. (the version I installed is twrp-3.1.1-0-libra), the link I used is here: https://dl.twrp.me/libra, the reason why I did not install version 3.1.1-1 is that It won't load in recovery mode.
Secondly, I tried to install lineage 14.1, 15.1,16.1, 17.1 (none of them worked), It gave me this error
E3004 the packge is for device 4c,libra, this device is .
After searching on google, I deleted the first line (the assert statement) in META-INF\com\google\android\updater-script.
I guess it managed to be installed (no error pop out).
the log displayed while it is installing:
detected filesystem ext4 for /dev/block/bootdevice/by-name/system
packing system image unconditionally
However, when I click boot to system, it stuck on the mi logo.
I need some suggestions on how to make this work.
Thanks in advance!
Flash the latest available official miui (currently V10.1.1.0), via mi flash tools
Flash twrp or orangefox, via ADB. twrp official site has an old version, androidfilehost has a newer version TWRP-20190528-3.3.1.0-libra. orangefox official site has taken down libra files but sourceforge has OrangeFox -R10.0-1-Stable-libra.
Then try again
I experienced "this device is ." problem before.
From I read somewhere in XDA, sometimes a ROM may require certain recovery images to flash. So if the image is published with some recovery, you may want to try them together.
The last time I flashed my mi4c successfully, the LineageOS build and TWRP are both from this post: https://forum.xda-developers.com/t/rom-android-8-9-10-unofficial-lineageos-for-mi-4c-mi-4s.4008625/ .
Good luck
Gourcuff14 said:
Flash the latest available official miui (currently V10.1.1.0), via mi flash tools
Flash twrp or orangefox, via ADB. twrp official site has an old version, androidfilehost has a newer version TWRP-20190528-3.3.1.0-libra. orangefox official site has taken down libra files but sourceforge has OrangeFox -R10.0-1-Stable-libra.
Then try again
Click to expand...
Click to collapse
Thank you! I finally managed to install lineage 14.1, but not 15.1, 16.1 or 17.1, weird
momocraft said:
I experienced "this device is ." problem before.
From I read somewhere in XDA, sometimes a ROM may require certain recovery images to flash. So if the image is published with some recovery, you may want to try them together.
The last time I flashed my mi4c successfully, the LineageOS build and TWRP are both from this post: https://forum.xda-developers.com/t/rom-android-8-9-10-unofficial-lineageos-for-mi-4c-mi-4s.4008625/ .
Good luck
Click to expand...
Click to collapse
Thank you, I finally managed to install lineage 14.1, but not 15.1, 16.1 or 17.1, weird.
Haha but now I failed to bypass the ssl pinning through sslunpinning and frida ><, frida says Bad access due to invalid address
Any idea how to fix this?
Try the boot image included in this build package and post your findings in that thread for assistance.
[ROM][8.1/9/10/11][Unofficial][EOL] LineageOS for Mi-4c/Mi-4s
DESCRIPTION Unofficial LineageOS ROMs for Mi-4c (libra) and Mi-4s (aqua), with base-layer enhancements and performance optimizations. Version 15.1/16.0/17.1/18.1 are available for download. FEATURE The following items may not be available for...
forum.xda-developers.com
you need orangefox for mi4c
yanzifan021 said:
Thank you! I finally managed to install lineage 14.1, but not 15.1, 16.1 or 17.1, weird
Click to expand...
Click to collapse
Hi friend, could you share the download link 14.1, thanks
timsg said:
Hi friend, could you share the download link 14.1, thanks
Click to expand...
Click to collapse
Here there are some builds https://androidfilehost.com/?w=search&s=libra&type=files&page=19
New here...
I was using lineage 18.1 unofficial on my poco x3 nfc... worked well.
I flashed the latest surya Lineage 18.1 official... (followed the guide on recoverymode dot com)
after flashing, phone will begin loading the lineage logo... after 30 to 40 seconds it restarts and goes back into TWRP.
In TWRP there is now a warning/error message in red letters....
"android rescue party trigger! possible solutions? either 1.wipe caches, and/or 2.format data, and/or 3. clean flash rom"
I tried going back to the 18.1 unofficial lineage rom... same behavior and message....???
I read a lot online and believe it may be Magisk but am at a loss as to how to proceed and fix the issue to get my phone working again !
TWRP 3.5.2
Magisk 23.0
Any solutions, advice welcome... first post here so hoping some Big BRAIN has a fix for me... thanks in Advance !
Flacoustix said:
was using lineage 18.1 unofficial on my poco x3 nfc... worked well.
I flashed the latest surya Lineage 18.1 official... (followed the guide on recoverymode dot com)
Click to expand...
Click to collapse
You should follow the instructions given in the official Lineage thread.
It's not possible to dirty flash official Lineage over unofficial.
If you want to take the safe route:
- Flash latest MIUI fastboot ROM (don't relock your bootloader)
- Flash TWRP recommend in the Lineage thread
- Flash Lineage, GApps, Magisk according the instructions in the Lineage thread
thanks for your speedy reply...
yes I want to take the "safe route"
I am downloading the latest MIUI fastboot rom.... do I install with MiFlash tool or adb?
I have only been at this game a few months and have had no problems up until now... still a bit green...
Thanks in advance
Flacoustix said:
thanks for your speedy reply...
yes I want to take the "safe route"
I am downloading the latest MIUI fastboot rom.... do I install with MiFlash tool or adb?
I have only been at this game a few months and have had no problems up until now... still a bit green...
Thanks in advance
Click to expand...
Click to collapse
Use Miflash tool. Once you successfully flashed MIUI, the rest is rather easy
Cheers m8... many thanx !!!
Hi there,
I tried to install Magisk v23 with OrangeFox Recovery and after realising it doesn't work, I unistalled it and got into a bootloop.
How do I get out of this?
My OS is Havoc OS 4.10.
ERm.......Try dirty flash the rom?
Get to Recovery and install new ROM
Lu5ck said:
ERm.......Try dirty flash the rom?
Click to expand...
Click to collapse
I did that and it worked. Thank you
Hello everyone! I wanted to consult something else, yesterday I asked how to install lineageOS or any rom and it worked perfectly, now I would like to install magisk to pass the SafetyNet test to use some banking applications that I have, also install some modules that interest me, with lineageOS as I know does this rooting process? Is it the same one that appears in the forum or do I have to download a newer file?
Greetings and thank you very much!
PS: thanks RandomLatinDude for the help yesterday!
Yasser.d said:
Hello everyone! I wanted to consult something else, yesterday I asked how to install lineageOS or any rom and it worked perfectly, now I would like to install magisk to pass the SafetyNet test to use some banking applications that I have, also install some modules that interest me, with lineageOS as I know does this rooting process? Is it the same one that appears in the forum or do I have to download a newer file?
Greetings and thank you very much!
PS: thanks RandomLatinDude for the help yesterday!
Click to expand...
Click to collapse
Rooting Lineage is pretty simple, download the latest Magisk apk from the Magisk github and rename it to Magisk.zip and flash it in Lineage recovery like you flashed the ROM with adb sideload.
AtoZ0to9 said:
Rooting Lineage is pretty simple, download the latest Magisk apk from the Magisk github and rename it to Magisk.zip and flash it in Lineage recovery like you flashed the ROM with adb sideload.
Click to expand...
Click to collapse
+1 sideload. Easiest way hands down. Patching boot img is way outdated.