Poco F2 stuck on loading - Xiaomi Poco F2 Pro (Redmi K30 Pro) Questions & Ans

Hi guys,
I have changed battery for my poco f2. After installing new battery and trying to switch my phone back its stuck on loading. I mean it switch on goes to the 5G logo and switch off. Or if I will plug cable (to the pc or charger) it always goes to the 5G logo and reboots again.
Have tried to wipe the data but no changes.
I have this phone for a year probably and it was unlocked before but always running original software.
I have tried to go in the Poco-recovery 3.0 menu and select connect with MIAssistant but my laptop cant find any connected device.
Is there anything can be done?

driweris said:
Hi guys,
I have changed battery for my poco f2. After installing new battery and trying to switch my phone back its stuck on loading. I mean it switch on goes to the 5G logo and switch off. Or if I will plug cable (to the pc or charger) it always goes to the 5G logo and reboots again.
Have tried to wipe the data but no changes.
I have this phone for a year probably and it was unlocked before but always running original software.
I have tried to go in the Poco-recovery 3.0 menu and select connect with MIAssistant but my laptop cant find any connected device.
Is there anything can be done?
Click to expand...
Click to collapse
The drivers seem absent
Download MI unlock and install the drivers from the program
Try again with Mi assistant

NOSS8 said:
The drivers seem absent
Download MI unlock and install the drivers from the program
Try again with Mi assistant
Click to expand...
Click to collapse
Mi Unlock doesn't pass verification but it says DEVICE UNLOCKED don't need to repeat unlock.
With Mi assistant bit difficult..phone shows that its plug in with usb cable but the MI assistant cant see the phone..

driweris said:
Mi Unlock doesn't pass verification but it says DEVICE UNLOCKED don't need to repeat unlock.
With Mi assistant bit difficult..phone shows that its plug in with usb cable but the MI assistant cant see the phone..
Click to expand...
Click to collapse
I never told you to use Miunlock .
just use for drivers.

NOSS8 said:
I never told you to use Miunlock .
just use for drivers.
Click to expand...
Click to collapse
Try Mi Flash for the drivers https://forum.xda-developers.com/t/guide-use-xiaomi-flash-tool.4262425/
post 'Launch MIFLASH and install drivers'
_______________________________________________________________________
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Related

Stuck at LG logo

i booted into recovery, made a full backup, wiped everything but internal storage, flashed to lollipop 5.1 but decided to go back to my backup. so rebooted into recovery again and restored the backup. everything seemed to work correctly but after rebooting phoned stuck at lg logo. so i rebooted into recovery by holding "volume - and power" and the factory data reset screen came up and i confirmed that i wanted to reset phone, expecting it to boot into twrp but it went to the the black screen with the android on his side (or something like that), which i assume it did do a factory reset.
so still stuck at lg logo with no custom recovery anymore apparently. among other things, i used srktool to nuke download mode, so phone immediatly goes into fastboot mode. now im trying to use the "fix fastboot mode" but it just sits there saying waiting for device even though i have phone connected to computer in fastboot mode.
is it likely that if/when it did the factory reset, that would disable the usb debugging setting and that's why srktool just shows "waiting for device"?
im betting that your OS got corrupted. You can try to reflash your ROM, or you might be relegated to going into download mode and reflashing the OS back to stock. I have a link for the LG recovery tool and the stock 4.4.2. All youll need from there is towel root and the recovery i have in a separate post
hi i have same problem con you explein how can i do this
hi i have same problem con you explein how can i do this
l.musaj said:
hi i have same problem con you explein how can i do this
Click to expand...
Click to collapse
try this
http://forum.xda-developers.com/att-g2/development/twrp-5-0-d800-g2s-t3247754
youdoofus said:
try this
http://forum.xda-developers.com/att-g2/development/twrp-5-0-d800-g2s-t3247754
Click to expand...
Click to collapse
thank you but my lg d800 dosnt entry in download mode it stuck
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
he stuck here in ports dosnt show nothink but in USB controllers its unknown device
l.musaj said:
thank you but my lg d800 dosnt entry in download mode it stuck
he stuck here in ports dosnt show nothink but in USB controllers its unknown device
Click to expand...
Click to collapse
uninstall the usb driver and let windows find the correct driver for it and follow the stuff in the link i provided after the computer recognizes the device. If that doesnt work do the stuff in the link on another computer or try a different cable. If you can get to download mode, youre likely ok. The issue is either the computer or the cable, not the phone.

Oneplus 8 fastboot only

I have a t mobile variant that is sim unlocked and bootloader unlocked.
I wanted to convert to a Global version however it failed because I apparently had the wrong oem software.
I used all in one tool which worked great for everything else I needed but here is the problem; I can only boot into fastboot mode and crashdump mode. When using all in one tool I chose to wipe the device before installing the new software
I also cannot get into EDL Mode to use the Msmdownload tool even though the correct drivers are installed to use this tool.
Anyway out of this? Thanks...
Aslo; I have tried fastboot commands with no luck...
You need to msm using edl. If you are bl unlocked, flash a custom ROM to get booted and maybe try again using proper tool?
Also, try different USB ports, cables, etc. You should be able to boot into edl with hw keys and connect to msmtool
As I stated I can not get into edl, I tried all the the other things also, cables, ports. I did not know I could have flashed a custom rom at this point, phone was not rooted either...
Oneplus has it now for repair, they are about 300 miles from me, or the service center is?
Gabriel51 said:
As I stated I can not get into edl, I tried all the the other things also, cables, ports. I did not know I could have flashed a custom rom at this point, phone was not rooted either...
Oneplus has it now for repair, they are about 300 miles from me, or the service center is?
Click to expand...
Click to collapse
Not sure if you got this fixed but boot into fastboot, the use "fastboot boot" to boot into AICP Recovery. Within recovery eanble ADB, then "adb reboot edl". EDL mode is just a black screen and your phone will exit it and try to boot after a few seconds if the drivers are not installed so its easy to miss. If your phone can boot into fastboot it can boot into EDL.
I do not see that feature listed? Phone would not boot into normal recovery, it went right back into fastboot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Also if you had read through the posts you would know that I already sent it to 1+ for repair, they have had it a couple of days...
OnePlus repaired my device for nothing which is nice however It's now sim locked and at first try T-mobile says this device does not qualify for unlock!!! T-mobile also said they are looking into it because it was previously unlocked and it may take a week to get a reply.
I called OnePlus and their response was it's not our problem (more or less) I sent them a unlocked phone and they completely ignored my request to load the global software on this device, they did what they wanted to, they could have contacted me at any time..THANK YOU OnePlus.

PLEASE SOLVE I BRICKED LE 1S MY LEX507 DEAD PLEASE ANYONE HELP ME

I HAVE BRICKED MY PHONE BY INSTALLING TWRP AND FLASHING CUSTOM ROM ON TWRP MY LEX507 IS DEAD .
I TRIED TO FLASH MY MOBILE BUT I AM RECIVING MORE ERROR ON FLASH TOOL
ANOTHER THINK IS IN MY COMPUTER WHEM I CONNECT MY LECO DEVICE IT CONTINOUSLY DETECTING AND UNDETECTING TWO DEVICES
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SOMETIMES IT DETECTS MTK USB
SOMETIMES IT DETECTS PRELOADER USB VCOM PORT
THEN OTHER ERRORS FROM FLASHING TOOL I RECIVE ARE AS FOLLOWS
*
ERROR CODE 5000
*
ERROR CODE 6029
*
ERROR CODE 2005
*
ERROR CODE 2004
PLEASE ANY ONE HELP ME PLZ HELP AS SOON AS POSSIBLE
Can you enter the recovery? If you cannot, the phone is hard bricked. You can't do anything about it.
I CAN'T ENTER RECOVERY IN MY PHONE. IT IS NOT AT ALL BOOTING .
WHEN I CONNECT TO CHARGER RED LED GLOWS.
IS THERE ANY OTHER OPTIONS TO RECOVERY IT.
I AM CRYING.
Have you tried from a device running a supported OS? (not Windows 11)
Not certain if it has anything to do, but AFAIK Windows 11 is only in beta.
I HAVE TRIED FROM WINDOWS 10 ONLY.
PLEASE ANYONE HELP ME I WANT MY PHONE BACK
jason141207 said:
I CAN'T ENTER RECOVERY IN MY PHONE. IT IS NOT AT ALL BOOTING .
WHEN I CONNECT TO CHARGER RED LED GLOWS.
IS THERE ANY OTHER OPTIONS TO RECOVERY IT.
I AM CRYING.
Click to expand...
Click to collapse
Can you enter fastboot or Download mode? Chances are pretty low you can actually do something to be honest...
Those kinds of things happen. It's happened to me tone of times.
dedq said:
Can you enter fastboot or Download mode? Chances are pretty low you can actually do something to be honest...
Those kinds of things happen. It's happened to me tone of times.
Click to expand...
Click to collapse
NO MY PHONE NOT AT ALL BOOTING, WHEN I CONNECT TO CHARGER RED LIGHT GLOWS
jason141207 said:
NO MY PHONE NOT AT ALL BOOTING, WHEN I CONNECT TO CHARGER RED LIGHT GLOWS
Click to expand...
Click to collapse
That is hard brick and go take it somewhere to some third-party technician who will be able to fix it.
dedq said:
That is hard brick and go take it somewhere to some third-party technician who will be able to fix it.
Click to expand...
Click to collapse
THEN MY PHONE DEAD THAT'S ALL,

Realme 5i phone dead but can be detected in Windows 10

So i was trying to install twrp and it failed and the phone displayed this "the current image(boot/recovery) have been destroyed" and keeps turning on and off. Later it restarts and got stuck in the logo "Realme with powered by Android". I don't know what happened. I can't press volume up and power button. So I waited till it drains its battery. So I tried charging it back and it shows charging red. Then when it reaches to a point where it can turn on, It got stuck in the charging white logo thingy and it wont let me do anything.
But after a few tries it finally wont turn on.
I tried connecting it to the computer and somehow it shows an unknown driver.
QUSB_BULK_CID:0411_SN:B3336417
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have no idea what that is but I know that "B3336417" is the ID of the phone.
Can anyone help me how to fix this phone?
Assuming you've correctly installed ADB driver on Windows 10 then if USB Debugging didn't get enabled on phone you'll NOT see the phone in Windows' Device Manager under Portable Devices - where it should be shown.
Try installing MTK Drivers, it should fix the problem
EDIT: Then flash Stock ROM using SP Flash Tool V5
jwoegerbauer said:
Assuming you've correctly installed ADB driver on Windows 10 then if USB Debugging didn't get enabled on phone you'll NOT see the phone in Windows' Device Manager under Portable Devices - where it should be shown.
Click to expand...
Click to collapse
I pressed volume up + volume down + power button and it takes me to fastboot mode. Do you know how to restore back the phone? where can I find the stock rom for realme 5i?
NoveNoki said:
Try installing MTK Drivers, it should fix the problem
EDIT: Then flash Stock ROM using SP Flash Tool V5
Click to expand...
Click to collapse
I pressed volume up + volume down + power button and it takes me to fastboot mode. Do you know how to restore back the phone? where can I find the stock rom for realme 5i?
Grim Face said:
I pressed volume up + volume down + power button and it takes me to fastboot mode. Do you know how to restore back the phone? where can I find the stock rom for realme 5i?
Click to expand...
Click to collapse
Here are official ROM files from all Realme phones: https://www.realme.com/eu/support/software-update just search for your phone and you should find it, tho you will need a computer so you can flash the files
EDIT: Do you know if your device uses MediaTek chip?
NoveNoki said:
Here are official ROM files from all Realme phones: https://www.realme.com/eu/support/software-update just search for your phone and you should find it, tho you will need a computer so you can flash the files
EDIT: Do you know if your device uses MediaTek chip?
Click to expand...
Click to collapse
My phone uses Snapdragon but I finally have OrangeFox recovery
NoveNoki said:
Here are official ROM files from all Realme phones: https://www.realme.com/eu/support/software-update just search for your phone and you should find it, tho you will need a computer so you can flash the files
EDIT: Do you know if your device uses MediaTek chip?
Click to expand...
Click to collapse
Can I flash my rom to the Orange Fox Recovery mode? It seems that my OS is gone.
Grim Face said:
Can I flash my rom to the Orange Fox Recovery mode? It seems that my OS is gone.
Click to expand...
Click to collapse
I think you should be able to, i am not too sure. But i whould recommend you to flash it manually using the fastboot mode, tho if you can try flashing it from the recovery

OnePlus 8T+ 5G (TMO KB2007) stuck in EDL mode, how do I get SMT Download mode to work?

I messed up my phone badly, I can't even get Qualcomm CrashDump mode to appear, it's just stuck in EDL mode, how do I get SMT Download mode to work to fix it?
SharpnessXVSlayer said:
I messed up my phone badly, I can't even get Qualcomm CrashDump mode to appear, it's just stuck in EDL mode, how do I get SMT Download mode to work to fix it?
Click to expand...
Click to collapse
MSMDownloadTool
AnierinB said:
MSMDownloadTool
Click to expand...
Click to collapse
I already have the tool, but SMT Download mode won't start without info.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AnierinB said:
MSMDownloadTool
Click to expand...
Click to collapse
Can you help me?
SharpnessXVSlayer said:
Can you help me?
Click to expand...
Click to collapse
Just don't try to unlock SMT Download mode, it will wipe your IMEI and your Widevine certificate if you use it.
On the login prompt select "Other" in the dropdown menu and click on Next.
Wait a few seconds until main window shows up.
Click on Target button and select O2 while using global tool or India while using indian tool or EU when using european tool.
Press Start button (this is done so that device will be "captured" automatically by tool instead of going back to normal boot after 10 seconds).
You'll lose your imei
Rootk1t said:
Just don't try to unlock SMT Download mode, it will wipe your IMEI and your Widevine certificate if you use it.
On the login prompt select "Other" in the dropdown menu and click on Next.
Wait a few seconds until main window shows up.
Click on Target button and select O2 while using global tool or India while using indian tool or EU when using european tool.
Press Start button (this is done so that device will be "captured" automatically by tool instead of going back to normal boot after 10 seconds).
Click to expand...
Click to collapse
1. I have a backup of my EFS partition.
2. I don't have a target dropdown box in my MsmDownloadTool.
3. It doesn't boot at all, it goes straight to EDL mode.
Edit: I will try this though, so thanks for the help for now.

Categories

Resources