Database Info

HTC Inspire 4g AT&T useless

Hi all, try to be brief, but not simple:
First, I swear I've read many posts with cases similar to mine and I tried so many commands and tricks without success, so I decide to publish mine.
I have an HTC Inspire 4G, AT&T, rooted, S-off, and running Trickdroid. After a while I decided to return it to the original stock. However, when using the RUU utility, I got an error message and my phone it ruined.
Try to summarize as much as possible the conditions and the current situation:
Environments: Windows XP, Windows 7, Mac OS.
Power not work
Power + Vol Down do not work.
If I connect it to the outlet orante LED turn on, and charging it, but I must not press any buttons at all, after ten minutes, HTC logo appears with four exclamation marks on the screen. However, Windows can not find the device until 5 or 10 minutes later.
I have access to fastboot commands, but not ADB. I tried to format the partitions, reflash, do recovery, recover partitions, etc, endless commands that do not give me a result.
The information obtained from the achievement of limited screen or fastboot commands is as follows:
ACE PVT HIP S-OFF RL
HBOOT-0.85.0019
MICROP-0438
RADIO-26.06.04.06_M
eMMC-BOOT
Dec 27 2012, 14:47:30
RUU​
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.85.0019
(bootloader) version-baseband: 26.06.04.06_M
(bootloader) version-cpld: None
(bootloader) version-microp: 0438
(bootloader) version-main: 2.47.502.7
(bootloader) serialno: HTxxxxxxxxxx
(bootloader) product: ace
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PD9812000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4196mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: dirty-9854d819
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) region-id: 0
all: Done!
finished. total time: 0.171s​
fastboot oem boot
< waiting for device >
...
(bootloader) setup_tag addr=0xA0000100 cmdline add=0x8D08BECC
(bootloader) TAG:Ramdisk OK
(bootloader) TAG:smi ok, size = 0
(bootloader) TAG:hwid 0x0
(bootloader) TAG:skuid 0x27E0E
(bootloader) TAG:hero panel = 0x830012
(bootloader) TAG:engineerid = 0x0
(bootloader) MCP dual-die
(bootloader) MCP dual-die
(bootloader) TAG:mono-die = 0x0
(bootloader) Device CID is super CID
(bootloader) CID is super CID
(bootloader) Backup CID is CWS__001
(bootloader) setting->cid::CWS__001
(bootloader) serial number: HT19VT207144
(bootloader) commandline from head: no_console_suspend=1
(bootloader) command line length =506
(bootloader) active commandline: board_spade.disable_uart2=0 board_spade.
(bootloader) usb_h2w_sw=0 board_spade.disable_sdcard=0 diag.enabled=0 boa
(bootloader) rd_spade.debug_uart=0 smisize=0 userdata_sel=0 androidboot.e
(bootloader) mmc=true androidboot.baseband=26.06.04.06_M androidboot.cid
(bootloader) =CWS__001 androidboot.batt_poweron=good_battery androidboot.
(bootloader) carrier=ATT androidboot.mid=PD9812000 enable_zcharge=1 andro
(bootloader) idboot.keycaps=qwerty androidboot.mode=normal androidboot.se
(bootloader) rialno=HT19VT207144 androidboot.bootloader=0.85.0019 zygote_
(bootloader) oneshot=off kmemleak=off no_console_suspend=1
(bootloader) aARM_Partion[0].name=misc
(bootloader) aARM_Partion[1].name=recovery
(bootloader) aARM_Partion[2].name=boot
(bootloader) aARM_Partion[3].name=system
(bootloader) aARM_Partion[4].name=cache
(bootloader) aARM_Partion[5].name=userdata
(bootloader) aARM_Partion[6].name=devlog
(bootloader) aARM_Partion[7].name=pdata
(bootloader) partition number=8
(bootloader) Valid partition num=8
(bootloader) Delay 98712(us) for dpram command before goto AMSS...
(bootloader) jump_to_kernel: machine_id(2844), tags_addr(0x4000100), kern
(bootloader) el_addr(0x4008000)
(bootloader) -------------------hboot boot time:0 msec
FAILED (status read failed (Too many links))
finished. total time: 232.216s​
I used the commands, among many others:
Fastboot oem boot
fastboot flash recovery recovery.img (or zip)
fastboot oem resetRUUflag
fastboot reboot -bootloader (this just turn the phone off)
fastboot oem get_identifier_token (answer: (bootloader) [ERR] Command error !!!)
fastboot format userdata
formatting 'userdata' partition...
FAILED (remote: unknown command)
FAILED (remote: unknown command)
finished. total time: 0.020s​fastboot format cache
formatting 'cache' partition...
FAILED (remote: unknown command)
FAILED (remote: unknown command)
finished. total time: 0.017s​
In many cases the response message in the command line is: remote no allowed
SD card formatted.
I have no access to the SD card from the phone connected.
Please tell me if there is any other way to recover my phone, or if it is just an expensive piece of nothing.
Thanks for everything.

What happened when you tried to flash recovery from fastboot?

bananagranola said:
What happened when you tried to flash recovery from fastboot?
Click to expand...
Click to collapse
./fastboot flash zip PD98IMG.zip
sending 'zip' (3619 KB)...
OKAY [ 0.623s]
writing 'zip'...​
No more response, stuck there...
In many other commands (I just don't remember after trying several) I got the message "remote not allowed"

Frogzter said:
./fastboot flash zip PD98IMG.zip
sending 'zip' (3619 KB)...
OKAY [ 0.623s]
writing 'zip'...​
No more response, stuck there...
In many other commands (I just don't remember after trying several) I got the message "remote not allowed"
Click to expand...
Click to collapse
That's because you need a recovery.img, not a PD98IMG.zip:
Code:
fastboot flash recovery recovery.img

bananagranola said:
That's because you need a recovery.img, not a PD98IMG.zip:
Code:
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
I got this:
./fastboot flash recovery r.img
sending 'recovery' (4456 KB)...
OKAY [ 0.764s]
writing 'recovery'...
FAILED (remote: not allowed)
finished. total time: 0.771s
Why?
Click to expand...
Click to collapse

Is your phone in fastboot mode?

bananagranola said:
Is your phone in fastboot mode?
Click to expand...
Click to collapse
Yes, it is, or at least I think so, because the command fastboot devices, found my device, besides, the command fastboot getvarr all, also works...

No more responses guys?

Where are you getting the recovery? How are you putting your phone in fastboot? Are you running the command from the folder where the recovery is? Are you sure you are S-Off?

bananagranola said:
Where are you getting the recovery? How are you putting your phone in fastboot? Are you running the command from the folder where the recovery is? Are you sure you are S-Off?
Click to expand...
Click to collapse
Power button not work
Power + Vol Down not work either.
If I connect it to the outlet orange LED turn on, and charges the battery, after ten minutes, HTC logo appears with four exclamation marks on the screen. However, Windows can not find the device until 5 or 10 minutes later, after this 10 minutes, if I connect via USB the device is responsive to fast boot devices command...
besides the screen shows:
ACE PVT HIP S-OFF RL
I have to command and the recovery file in the same folder

Er, what about the rest of my questions? How are you getting to fastboot with broken buttons? Is there an "adb reboot fastboot"?

Frogzter said:
Power button not work
Power + Vol Down not work either.
If I connect it to the outlet orange LED turn on, and charges the battery, after ten minutes, HTC logo appears with four exclamation marks on the screen. However, Windows can not find the device until 5 or 10 minutes later, after this 10 minutes, if I connect via USB the device is responsive to fast boot devices command...
besides the screen shows:
ACE PVT HIP S-OFF RL
I have to command and the recovery file in the same folder
Click to expand...
Click to collapse
What RUU did you use?? that sounds like a messed bootloader....

bananagranola said:
Er, what about the rest of my questions? How are you getting to fastboot with broken buttons? Is there an "adb reboot fastboot"?
Click to expand...
Click to collapse
I don't do anything.. I can't... if I plug the usb cable and touch any button nothing happen but if just plug it and let the phone alone, after 20 minutes do to fastboot mode...
"adb devices" don't detect the device.. just "fastboot devices" does

glevitan said:
What RUU did you use?? that sounds like a messed bootloader....
Click to expand...
Click to collapse
Well, now I feel ashamed, I can't remember with one I used... I just google the last version, because I wanted to get back to the original rom...
I formatted the computer with MAC OS, Linux, Win 7 and Win XP, looking for fix it, so I don't have much trace of with one I used.

HTC INSPIRE. att cws_001 bootloader 2.00.0030 s-on
Same thing on mine except my phone never comes on but fastboot is the only thing that recognizes my phone with limited commands. when I do a faceboot devices I get this ☺ ⌠σ fastboot no serial numbers as it use to have. Phone will not turn on at all. while nothing plugged in no light or anything even when trying to power on or get to hboot no sign of life at all. When I plug it in I get solid orange light. Pc sees it as android usb devices - my htc. but stock rom exe dont find phone. this happened to me when I was using xlmultitool 2.1. I was tyring for s 0ff after the option to [5] Flash HBOOT S-OFF Unprotected (via adb) this is when my troubles started. cant flash anything to it. when I try to flash the stock rom I get error file to big. In need of help.......I do have a gold card....
C:\Android>fastboot flash zip PD98IMG_Inspire_S-ON_FactoryRestore_GB_1.07.zip.
sending 'zip' (315734 KB)...
FAILED (command write failed (Unknown error))
finished. total time: 0.636s
C:\Android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader:
(bootloader) version-baseband: 26.09.04.11_M2
(bootloader) version-cpld: ☺
(bootloader) version-microp: ☺
(bootloader) version-main: ♦
(bootloader) serialno: ☺ ⌠σ
(bootloader) imei: 3544550xxxxxxxx ......just sits here tells me nothing more
C:\Android>fastboot flash recover recovery.img
< waiting for device >
sending 'recover' (5532 KB)...
OKAY [ 0.624s]
writing 'recover'...
FAILED (remote: partition does not exist!)
finished. total time: 0.625s
C:\Android>fastboot flash system system.img
sending 'system' (571388 KB)...
FAILED (remote: data length is too large)
finished. total time: 0.002s
C:\Android>fastboot oem boot
...
(bootloader) [DISPLAY_ERR] allocate heap for splash image fail!!!
(bootloader) [SD_HW_ERR] SD: No device attached
(bootloader) [SD_HW_ERR] SD: No device attached
(bootloader) [ERR] Boot/Recovery image does not exist!!!
OKAY [ 0.116s]
finished. total time: 0.117s
C:\Android>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.002s]
writing 'unlocktoken'...
FAILED (remote: unlock token check failed)
finished. total time: 0.008s
C:\Android>fastboot oem lock
...
(bootloader) Device was already locked!
OKAY [ 1.004s]
finished. total time: 1.005s

sorry to double post but its been about a year is there a fix for this please someone help....

wacky_35016 said:
sorry to double post but its been about a year is there a fix for this please someone help....
C:\Android>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.002s]
writing 'unlocktoken'...
FAILED (remote: unlock token check failed)
finished. total time: 0.008s
C:\Android>fastboot oem lock
...
(bootloader) Device was already locked!
OKAY [ 1.004s]
finished. total time: 1.005s
Click to expand...
Click to collapse
Sounds like it's still s-on. Where did you get your Unlock_code.bin from? Have you tried using htc dev to get one or a new one?

Flashing Problem (Bricked phone)

Dear,
I bought a mobile XT1032 in Chile and had the bright idea to install Android 5.0.0, but before that should turn my phone GPE and worked smoothly for about two months, but a few weeks ago the screen began to random failures for example the phone is locked and unlocked without my intervention or the screen, the phone is locked, blinking (as it had voltage changes, such as when you move a flashlight with almost empty and this flashing batteries). I decided to go back to Android 4.4.4 Stock, however this time I did the procedure without considering the consequences, I first downloaded and installed the GPE 4.4.4, then downloaded and installed the Stock Brasil 4.4.4, then tried to go back to stock Movistar Chile but failed to find the 4.4.4 nowhere, so I decided to install the 4.4.3. My mistake. After that my phone did not work more.
Now if I switch it displays the message "Unlocked Bootloader" then shows motorola logos (the world turning) and then the screen goes black but not off (note that is on because it has brightness and that was with that flicker as if he had mentioned voltage failures) but this does not show anything.
I tried installing all the tutorials I found on the internet to revive my phone, I got about 15 different roms and nothing works. I can enter fastboot and no problems (strangely fastboot screen does not flash, it is as if he had nothing wrong), I can also enter recovery (either in recovery flashing display). If I make a recovery "wipe data / factory reset" does well, but if I do "wipe reset partition" android logo shows the blue loading bar appears 2 seconds and the phone reboots.
I not been possible to change the recovery of stock for some other recovery (eg Philz) because although fastboot or mfastboot shows that the process was well (sometimes shown on the phone that is making a downgrade) this does not change the recovery.
Currently my phone is flashed (at least it is assumed that no starts beyond the worlds of motorola) with Android 5.0.2 I downloaded some other forum.
I think, without knowing for sure, for more than I try with the common commands this dont "touch" or change the system version. It's like I always show as well (including with commands in cmd and phone) but practically nothing happened.
I appreciate any guidance to solve my problem.
I attach a "getall var" from my phone
-----------------------------
C:\WorkingMotoG>mfastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 4118
(bootloader) product: falcon
(bootloader) secure: yes
(bootloader) hwrev: 0x83C0
(bootloader) radio: 0x1
(bootloader) emmc: 16GB Sandisk REV=06 PRV=07 TYPE=17
(bootloader) ram: 1024MB Samsung S4 SDRAM DIE=4Gb
(bootloader) cpu: MSM8226 CS
(bootloader) serialno: TA9300B3Y4
(bootloader) cid: 0x000C
(bootloader) channelid: 0x00
(bootloader) uid: D3BDB4030F000000000000000000
(bootloader) unlocked: yes
(bootloader) iswarrantyvoid: yes
(bootloader) mot_sst: 3
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei:
(bootloader) meid:
(bootloader) date:
(bootloader) sku:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Thu Jan 15 12:11:29 UTC 1970"
(bootloader) ro.build.fingerprint[0]: motorola/falcon_tefcl/falcon_umts:
(bootloader) ro.build.fingerprint[1]: 4.4.4/KXB21.14-L1.40/37:user/relea
(bootloader) ro.build.fingerprint[2]: se-keys
(bootloader) ro.build.version.full[0]: Blur_Version.210.12.40.falcon_umt
(bootloader) ro.build.version.full[1]: s.Movistar.en.CL
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.020
(bootloader) version-baseband:
(bootloader) kernel.version[0]: Linux version 3.4.42-gb89c9dd ([email protected]
(bootloader) kernel.version[1]: ilclbld31) (gcc version 4.7 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Fri Jun 20 01:58:53 CDT 2014
(bootloader) sdi.git: git=MBM-NG-V41.18-0-gdc5aeaf
(bootloader) sbl1.git: git=MBM-NG-V41.18-0-g5742832
(bootloader) rpm.git: git=MBM-NG-V41.18-0-gcecd6e9
(bootloader) tz.git: git=MBM-NG-V41.18-0-g99c1a7c
(bootloader) aboot.git: git=MBM-NG-V41.18-0-g99084d5
(bootloader) qe: qe 0/1
(bootloader) ro.carrier: unknown
all: listed above
finished. total time: 0.059s

Are you manually flashing each file/partition? You will get a validation error if you try to flash the motoboot file since you are already on a lollipop bootloader. A very important file to flash in my opinion is gpt.bin.
If you want a custom recovery on your phone, flash the recovery in fastboot or mfastboot, disconnect the USB cable, use the volume buttons to immediately boot into recovery without restarting the phone.

audit13 said:
Are you manually flashing each file/partition? You will get a validation error if you try to flash the motoboot file since you are already on a lollipop bootloader. A very important file to flash in my opinion is gpt.bin.
If you want a custom recovery on your phone, flash the recovery in fastboot or mfastboot, disconnect the USB cable, use the volume buttons to immediately boot into recovery without restarting the phone.
Click to expand...
Click to collapse
All the files loads OK, gpt.bin with exception of boot.img, it says: "version downgraded for boot" in the phone.
BTW: I do what you say about recovery and keep showing stock recovery. Dont show error messages, just no work.
Thanks anyway for you time...

Which recovery are you trying to flash?
So you flash custom recovery, use volumes button to boot to recovery from fastboot screen and you keep getting stock recovery, right?

audit13 said:
Which recovery are you trying to flash?
So you flash custom recovery, use volumes button to boot to recovery from fastboot screen and you keep getting stock recovery, right?
Click to expand...
Click to collapse
I'm trying to flash philz_touch_6.58.7-falcon.img
Thanks for your time

Did you try TWRP?

audit13 said:
Did you try TWRP?
Click to expand...
Click to collapse
Yes, but dont work neither

So both recoveries flash without an error but you can't boot into either receiver right after flashing?
If it doesn't work, there may be something wrong with the internal memory?

audit13 said:
So both recoveries flash without an error but you can't boot into either receiver right after flashing?
If it doesn't work, there may be something wrong with the internal memory?
Click to expand...
Click to collapse
Now my phone is recognized by Windows as "Qualcomm HS-USB QDLoader 9008". I try to fla**** with MotoFlasher and says:
OUTPUT: opening device: \\.\COM12
OUTPUT: OKAY [ 0.000s]
OUTPUT: greeting device for command mode
OUTPUT: OKAY [ -0.000s]
OUTPUT: identifying device
OUTPUT: ...serial = 0x3B4BDD3
OUTPUT: ...chip-id = 0x800 (MSM8226)
OUTPUT: ...chip-rev = 0x0
OUTPUT: ...sv-sbl = 0x0
OUTPUT: OKAY [ 0.002s]
OUTPUT: finding files
OUTPUT: ...programmer = programmer.mbn
OUTPUT: ...singleimage = singleimage.bin
OUTPUT: OKAY [ 0.000s]
OUTPUT: validating files
OUTPUT: OKAY [ 0.000s]
OUTPUT: switching to download mode
OUTPUT: OKAY [ 0.000s]
OUTPUT: greeting device for image downloading
OUTPUT: OKAY [ 0.001s]
OUTPUT: sending programmer
OUTPUT: OKAY [ 0.010s]
OUTPUT: flashing singleimage
OUTPUT: FAILED (blank-flash:sdl-transfer-image:sdl-hello:invalid HDLC frame)
OUTPUT:
OUTPUT:

That's not good. You may have to try the unbrick method to fix it.

audit13 said:
That's not good. You may have to try the unbrick method to fix it.
Click to expand...
Click to collapse
Which method? Can you gave me instructions or a link, please...?

http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798

flashing with fastboot does nothing

My moto g get stucked on a blank screen after the motorola logo animation.
I tried going into the recovery and wiping data and cache. Nothing happened.
I tried unlocking the bootloader --> No problem, it's unlocked now.
I tried reflashing the stock ROM via fastboot. Apparently all goes OKAY, all commands pass without problems, but when I reboot, still a blank screen.
I tried flashing a new ROM (5.0.2 Lollipop). Same problem, apparently it flashes everything ok but when reboots... nothing.
I tried to update only the recovery to ither Team Wins or Clockwork, they flash without problems but when I go to the recovery I get the stock one (I didnt reboot the phone went straight to recovery after flashing, and tried rebooting the phone as well).
I also tried to update only the bootloader (right now I'm at 41.13) tried to update it to 41.18, same problem... Apparently it flashes but when I reboot I still get the 41.13
Finally, I tried to hard-brick my phone using the Bootloader Bricker Tool posted here: http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798 and nothing happened.
So basically, it seems that everything I do via fastboot (or mfastboot - I tried both) it goes through without problems, but then it either reverts back to stock when the phone reboots or actually it doesnt write anything.
Any help, will be greatly appreaciated.
This is my getvar:all
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 4113
(bootloader) product: falcon
(bootloader) secure: yes
(bootloader) hwrev: 0x83C0
(bootloader) radio: 0x1
(bootloader) emmc: 8GB Sandisk REV=06 PRV=07 TYPE=17
(bootloader) ram: 1024MB Samsung S4 SDRAM DIE=4Gb
(bootloader) cpu: MSM8226 CS
(bootloader) serialno: T09290UV3C
(bootloader) cid: 0x000C
(bootloader) channelid: 0x00
(bootloader) uid: ADC65E030F000000000000000000
(bootloader) unlocked: yes
(bootloader) iswarrantyvoid: yes
(bootloader) mot_sst: 3
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei:
(bootloader) meid:
(bootloader) date:
(bootloader) sku:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Fri Jun 26 18: 9:42 UTC 2015"
(bootloader) ro.build.fingerprint[0]: motorola/falcon_amxar/falcon_umts:
(bootloader) ro.build.fingerprint[1]: 4.4.4/KXB21.14-L1.40/37:user/relea
(bootloader) ro.build.fingerprint[2]: se-keys
(bootloader) ro.build.version.full[0]: Blur_Version.210.12.40.falcon_umt
(bootloader) ro.build.version.full[1]: s.AmericaMovil.en.AR
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.020
(bootloader) version-baseband:
(bootloader) kernel.version[0]: Linux version 3.4.42-gb89c9dd ([email protected]
(bootloader) kernel.version[1]: ilclbld28) (gcc version 4.7 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Fri Jun 20 04:31:45 CDT 2014
(bootloader) sdi.git: git=MBM-NG-V41.13-0-gdc5aeaf
(bootloader) sbl1.git: git=MBM-NG-V41.13-0-g683cb0c
(bootloader) rpm.git: git=MBM-NG-V41.13-0-g71b1aae
(bootloader) tz.git: git=MBM-NG-V41.13-0-ga27c415
(bootloader) aboot.git: git=MBM-NG-V41.13-0-g7dc8e78
(bootloader) qe: qe 0/1
(bootloader) ro.carrier: unknown
all: listed above
finished. total time: 0.057s

Sounds like possible Bootloader corruption. I would try again with the unbrick tool. Best ask in the thread. Avoid trying to update Bootloader (motoboot.img) - Lollipop is not supported.
Here is the exact 4.4.2 Firmware Image:
http://www.filefactory.com/file/793...9_7_release-keys-cid12-AmericaMovil_AR.tar.gz

Thanks for the reply.
Ok, I'll head over to the unbrick thread again. The thing is my phone doesn't seem to be hard-bricked, because it boots to bootlader and it's not recognized by the PC as "qhsusb_bulk" in Device Manager.
That's why I tried to "brick" it using the tool on that thread, but it didnt get bricked at all :\

The unbrick tool should allow you to restore the Bootloader - if it is indeed corrupted.

lost101 said:
The unbrick tool should allow you to restore the Bootloader - if it is indeed corrupted.
Click to expand...
Click to collapse
I tried it several times now... The problem is that my phone is not being detected by Windows as "qhsusb_bulk" in the Device Manager. So I can't do what the instructions tell me to do.
So I used the Bootloader Bricer Tool
oversleeper said:
Bootloader Bricker Tool: If the previous tool had no effect or you think your bootloader is seriously damaged, this script will make your phone recognized as "qhsusb_bulk" so you can perform a blank flash
Click to expand...
Click to collapse
And this is what I get:
Code:
WARNING: READ CAREFULLY BEFORE YOU PROCEED!
THIS SCRIPT WILL DESTROY THE BOOTLOADER OF YOUR DEVICE.
DO NOT ATTEMPT TO USE UNLESS YOU'RE SURE ABOUT WHAT YOU'RE DOING.
ONLY YOU ARE RESPONSIBLE FOR YOUR ACTIONS.
Do you want to continue [Y/N]?Y
target max-sparse-size: 256MB
sending 'sbl1' (264 KB)...
OKAY [ 0.033s]
writing 'sbl1'...
OKAY [ 0.031s]
finished. total time: 0.067s
rebooting...
finished. total time: 0.002s
Your device is now hard bricked!
When it automatically reboots, it's like nothing happened: motorola logo, full animation, then blank screen. I can still enter the bootloader, run fastboot commands, etc etc...

epexy said:
I tried it several times now... The problem is that my phone is not being detected by Windows as "qhsusb_bulk" in the Device Manager. So I can't do what the instructions tell me to do.
So I used the Bootloader Bricer Tool
And this is what I get:
Code:
WARNING: READ CAREFULLY BEFORE YOU PROCEED!
THIS SCRIPT WILL DESTROY THE BOOTLOADER OF YOUR DEVICE.
DO NOT ATTEMPT TO USE UNLESS YOU'RE SURE ABOUT WHAT YOU'RE DOING.
ONLY YOU ARE RESPONSIBLE FOR YOUR ACTIONS.
Do you want to continue [Y/N]?Y
target max-sparse-size: 256MB
sending 'sbl1' (264 KB)...
OKAY [ 0.033s]
writing 'sbl1'...
OKAY [ 0.031s]
finished. total time: 0.067s
rebooting...
finished. total time: 0.002s
Your device is now hard bricked!
When it automatically reboots, it's like nothing happened: motorola logo, full animation, then blank screen. I can still enter the bootloader, run fastboot commands, etc etc...
Click to expand...
Click to collapse
I have two devices with the same problem as yours, one = motorola logo -> full animation -> black screen. And another boots up normally, but have a forgotten password, but if I try to enter recovery mode then "Boot Up Failed" message appear, and after I flash the device (and use erase userdata command), the device still have the password and all data apparently (the device boot up fast too).
The only thing that seems to work with fastboot is unlocking bootloader, and relock fails (even showing sucessful)
No one have this problems and have solutions ?????

I have the exact same problem. Was on a slim6 rom before. Tried to return to STOCK_ASIA_RETAIL. All fastboot commands successfully executed but no apparent change. I have the exact same wallpaper, the same layers RRO navbars, everything. I would not need to go to STOCK but since the slim installation is unstable and everything force closes, the phone is unusable.
Additional note: Somehow even TWRP is stuck in the splash screen, so cant flash any other ROM. Even tried to access TWRP using adb, but the TWRP service fails to start.
I fastboot flashed phillz recovery, stock recovery & newer TWRP versions, but nothing happens. Phone still stuck in TWRP screen.
To my surprise I was able to pull my personal files from the internal SD using ADB (which still works btw).
But I'm left with a phone in a zombie unusable condition, it just doesn't react to anything.
Any help from the XDA community would be greatly appreciated. I am still keeping my fingers crossed, so that one day a guide comes up to brick my device (STOCK 5.1 bootloader) and unbrick it using some sort of unbrick tool.

Unlock Bootlader Sharp Aquos S2

Hello. I try to unlock my phone but not working adb screen.
All necessary files and drivers are installed.
When I try run command "fastboot oem unlock", received this messages:
(bootloader) Verity mode: true
(bootloader) Device unlocked: false
(bootloader) Device critical unlocked: false
(bootloader) Charger screen enabled: true
OKAY [ 0.005s]
finished. total time: 0.006s
I try the this solution: https://forum.xda-developers.com/android/general/sharp-aquos-s2-ss2-sat-thread-t3761071/
and i writing this command in adb, giving me this :
fastboot.exe oem cert_timecount get
...
FAILED (remote: unknown command)
finished. total time: 0.002s
Please help me unlock this phone.

Hi, did you ever resolve this?

Redmi Note 8T and Bootloader

Hello everybody,
I need help to get my phone inbricked. Last year I installed LineageOS on my device and everything worked fine. Since I needed for some reason to relock my phone. I did via fastboot:
Bash:
fastboot oem lock
Since then my phone prints out: "The System has been destroyed ..."
I cannot flash anymore...
Code:
$ fastboot oem device-info
< waiting for any device >
...
(bootloader) Verity mode: true
(bootloader) Device unlocked: false
(bootloader) Device critical unlocked: false
(bootloader) Charger screen enabled: true
OKAY [ 0.000s]
finished. total time: 0.000s
What can I do to unlock the bootloader?