Code:
/*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
With data decrypt you can flash custom roms in recovery. In the near future there will be.
Notes:
* Data partition and Internal storage will be formatted (for decryption)
* Tested with latest MIUI 12.5.3.0
Credits
* TeamWin - for TWRP
* The OrangeFox Team - for your hard work
* ymdzq - for OFRP builder
* [email protected] & [email protected], [email protected] & [email protected] - for DisableForceEncryption
FEATURES
* Built-in support for installing init.d functionality
* Built-in support for installing Magisk
* AromaFM
* Flashlight
* Password, torch, led
* Support for Miui and Custom ROMs
* Superb new UI and themes
* OrangeFox theme engine:
- choice of theme (black, dark, etc)
- choice of color scheme
- choice of splash screen
* Alternative lockscreen
* And many more!
DOWNLOADS
Github download site: OrangeFox-21.05.02-Unofficial.zip (atom also use this)
Googledrive download site: DisableForceEncryption.zip
Google download site: Android SDK Platform-tools 31.0.2
REQUIRES
* Redmi 10X 5G (atom) or Redmi 10X Pro (bomb) devices with android 10 or 11.
* Bootloader unlocked and USB debugging enabled.
* PC/Laptop with Xiaomi driver installed.
INSTALLATIONS
1. Download the OrangeFox zip to your pc. Extract and get img file.
2. Reboot device and enter into fastboot mode.
3. Connect device to pc via usb cable.
4. Extract Android SDK Platform-tools and copy img file into this folder. Run cmd...
5. Flash img file: fastboot flash recovery OrangeFox-21.05.02-Unofficial-bomb.img
6. Flash nulled vbmeta: fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
7. Reboot to recovery: fastboot boot OrangeFox-21.05.02-Unofficial-bomb.img
8. If device not reboot to recovery automatically, press volume up + power at reboot.
9. Format data partion and Internal storage in OrangeFox. It will remove all your app data, gallery, sms, contacts,... Make sure backup first.
10. Copy DisableForceEncryption.zip to storage device. Install DisableForceEncryption.zip. Reboot to recovery again and check.
11. Enjoy!
Version Information
Status: Stable
Current Stable Version: R11.1
Stable Release Date: 2021-05-05
Created 2021-07-25
thank you for your great work
thanks，make custom rom
love u so much
thanks for your work. where's the vbmeta file?
joerusama said:
thanks for your work. where's the vbmeta file?
Click to expand...
Click to collapse
You can use stock vbmeta.img.
Just flash using:
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
after flashing it. when i reboot will the recovery be fox twrp or still redmi recovery
hoangx2x said:
after flashing it. when i reboot will the recovery be fox twrp or still redmi recovery
Click to expand...
Click to collapse
when I unzip the twrp file, its name is recovery.img . do i need to rename it to "OrangeFox-21.05.02-Unofficial-bomb.img"???
hoangx2x said:
when I unzip the twrp file, its name is recovery.img . do i need to rename it to "OrangeFox-21.05.02-Unofficial-bomb.img"???
Click to expand...
Click to collapse
Does not matter the name of it.
VD171 said:
Does not matter the name of it.
Click to expand...
Click to collapse
it work , thanks , but i need rename
Hi guys, I just want to ask if this will replace the stock recovery of miui permanently, because on my previous experience, flashing custom recovery and booting to the stock rom, the stock miui recovery will replace the custom recovery .
may i ask where is the vbmeta? it keeps on saying there is no vbmeta on the directory. i dont' have the stock vbmeta. please help
SirruxKyrios said:
may i ask where is the vbmeta? it keeps on saying there is no vbmeta on the directory. i dont' have the stock vbmeta. please help
Click to expand...
Click to collapse
you can get it in the zip file of the rom
Hello, can you help me? which would be the steps to install the beta of miui and magisk without losing the recovery orengefox. I could already install the beta rom but I cannot install magisk, because when I install the beta rom it removes orangefox and I can no longer install magisk. and thanks for the great contribution
alucard2409 said:
Hello, can you help me? which would be the steps to install the beta of miui and magisk without losing the recovery orengefox. I could already install the beta rom but I cannot install magisk, because when I install the beta rom it removes orangefox and I can no longer install magisk. and thanks for the great contribution
Click to expand...
Click to collapse
I used this one, all seems good
It doesn't actually decrypt data
Thank you for your hard work, but I am not able to decrypt it in practice. The version of my device is MIUI 12.5.8.0 stable, and the Android version I am running is Android 11. Is it possible that I have to use MIUI development version?
Can you guys share which driver you're using? My 10x pro is not being detected via fastboot mode. Thanks.
it keeps saying when i try to flash recovery that the file size is too big ? plz help
not working on androind 12 causes bootloop
Related
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
I built a ROM from Stock Chinese XT532 SBF. This is ROM uses kernel 2.6.35.11. This ROM is the stock XT532 ROM.
Advantages:
Newer kernel version. Existing XT530/XT531 Kernels are Froyo Kernel. This kernel is the actual Gingerbread Kernel.
Newer drivers, so increased performance.
New Experimental Build Based on 2nd-init:
ROM Download For 2nd-init: http://www.androidfilehost.com/?fid=23269279319196536
Instructions on how to install 2nd-init ROM for XT530/XT531:
1. Flash back stock XT530/XT531 SBF via RSD-Lite.
2. Root and Install Bootmenu/CWM.
3. Put ROM zip in your SD Card.
4. Reboot device into CWM Recovery.
5. Wipe data/factory reset and wipe cache.
6. Install the zip from SD Card.
7. Reboot Phone.
8. Your Done.
If the ROM boots up via 2nd-init properly then we will be one step closer to CyanogenMod. This ROM uses the XT532 ramdisk and boots it via 2nd-init. 2nd-init ROM uses the stock 2.6.32.9 XT530/XT531 to execute XT532 ramdisk and runs it on top of the XT530/XT531 kernel.
Build based on boot.img and ROM
Downloads:
ROM:http://www.androidfilehost.com/?fid=23269279319196135
boot.img:http://www.androidfilehost.com/?fid=23269279319196191
flex.img:http://www.androidfilehost.com/?fid=23269279319196189
hidden.img:http://www.androidfilehost.com/?fid=23269279319196190
How to install a ROM not based on 2nd-init:
1. Install Bootmenu
2. Put ROM zip on the SD Card.
3. Download boot.img
4. Open a CMD line and cd to the folder where you put "boot.img" file.
5. Flash the boot.img via fastboot:
Code:
adb reboot bootloader
Code:
fastboot flash boot boot.img
Code:
fastboot reboot
6. Reboot into Clockworkmod Recovery.
7. Install the zip from sdcard.
8. Wipe cache/data factory reset from CWM Recovery.
9. Reboot phone.
10. You're done.
If radio isn't working, try using these instructions:
1. Download hidden.img and flex.img
2. Put the two img files in the same folder as fastboot.
3. Open a cmd file and cd to the folder which contains the img files.
4. Reboot the phone back into fastboot mode
Code:
adb reboot bootloader
5. Flash flex.img and hidden.img via this command in cmd
Code:
fastboot flash flex flex.img
Code:
fastboot flash hidden hidden.img
6. Reboot the device via this command in cmd
Code:
fastboot reboot
NOTE: These instructions also work for 2nd-init ROMs for Motorola Fire XT530/XT531.
Kernel Source:
Sorry, Motorola hasn't released the kernel source for XT532 which the ROM is based on. The ROM uses an unmodified Motorola XT532 Kernel.
Bugs:
You tell me as I don't own a Motorola Fire XT530/XT531
Credits:
@zhalx
@inyong1
@7amdoun
@saraghon
@Mazzen.kh
@aweosomeabhijeet
Is it tested?
What are the bugs?
thanks
Mazzen.kh said:
Is it tested?
What are the bugs?
thanks
Click to expand...
Click to collapse
I don't know as I don't a Fire XT. Basically I just extracted the XT532 SBF and I winzipped the ROM. I signed it and uploaded. Make sure you make a nandroid before flashing the ROM
rootdefyxt320 said:
I don't know as I don't a Fire XT. Basically I just extracted the XT532 SBF and I winzipped the ROM. I signed it and uploaded. Make sure you make a nandroid before flashing the ROM
Click to expand...
Click to collapse
hi rootdefyxt320,
My question:
Is this different from the previous one that already tested in cwm thread?
7amdoun said:
Here is test 2:
Reverted back to 2.3.7 phone.apk to prevent FC
Changed some ADB settings
Added nvitems from our XT530
Added logcat reader for debugging, and root file manager for playing with files without having to re-flash.
Again, for whoever wants to test, please flash the new kernel first. Format data and cache partitions after flashing (right before rebooting).
http://www.mediafire.com/?j07gvesnxgg95ep
Click to expand...
Click to collapse
saraghon said:
thanks man!
---------- Post added at 11:50 PM ---------- Previous post was at 11:10 PM ----------
Good News!!!!!!!!!!!!!
After flashing the new kernel and your last zip here is the report:
1. Wifi working and finds the network and I can connect to the internet with the browser and all other apps.
2. Radio isn't working. and can't select the network mode. I think it's because XT532 is CDMA based phone and not GSM (Because it's stuck on CDMA in Network Mode).
3. ADB working.
4. Root working with Super Su.
5. Bluetooth working.
6. Sound working.
7. FM Radio working perfect.
8. GPS working.
9. Notification bar showing Dual SIM Network icon.
10. DUAL SIM Setting in Settings.
Thanks man!!!!!
I'll figure what's up with the radio and will try to fix it!
Click to expand...
Click to collapse
inyong1 said:
hi rootdefyxt320,
My question:
Is this different from the previous one that already tested in cwm thread?
Click to expand...
Click to collapse
Probably, but you can try for yourself. I'll see if I can fix RIL as it might not work.
Good
Dowloading
Voy a probar (testing)
---------------------------------------------------------------------------------
install and bootlop
flopezm said:
Good
Dowloading
Voy a probar (testing)
---------------------------------------------------------------------------------
install and bootlop
Click to expand...
Click to collapse
Did you flash boot.img via fastboot before flashing the ROM and did you wipe data and factory reset?
rootdefyxt320 said:
Did you flash boot.img via fastboot before flashing the ROM and did you wipe data and factory reset?
Click to expand...
Click to collapse
if so it was like I did,
in another attempt to make the tutorial also 2doi-nit, and I restarted the stock recovery again and again, fails to start
quetion?
who rom stock (spain, brasilian)
try with stock rom spain and brazil
Pitch Black Recovery For UMIDIGI S3 Pro
Note: This going to be official soon
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this project
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Pitch Black Recovery Project (PBRP) is a custom recovery project based on Team Win Recovery Project (TWRP) developed by Reza Adi, maintained by Manjot Sidhu and Mohd Faraz and themed by FireWolf.
Prerequisites
1. Unlocked bootloader.
Bugs
1. No bugs, test it's those sides which others haven't tested yet
2. If you have found a bug, please consider posting it to my GitHub Issues.
Instructions
Method 1 (Fastboot Installation)
1. Go to the fastboot mode.
2. Download the PitchBlack-S3-Pro.img and transfer it to the adb folder (rename is optional for simplicity).
3. Open the cmd/terminal and change directory into the adb folder.
4. Now confirm/check that device is connected by typing:-
Code:
fastboot devices
If you got your device seriel number there then you are ready to continue otherwise try connecting device again and make sure USB debugging is on and you have granted permission to the PC to debug.
5. After that we will flash this PBRP recovery to the recovery partition by below command:-
Code:
fastboot flash recovery PitchBlack-S3-Pro.img
BooM ! PBRP flashed successfully.
Method 2 (TWRP Installation)
1. As far i know there is an official twrp. If you have it installed in your device, then this is just a piece of cake
2. Flash PitchBlack-aubrey-2.9.0-20190606-2156-UNOFFICIAL.zip from twrp.
3. It will reboot to recovery automatically after that.
BooM ! PBRP flashed successfully.
Notes
DM-Verity patch added to flashable zip
Force Encryption patch also added to flashable zip
Downloads
Recovery Image => https://www.androidfilehost.com/?fid=6006931924117889645
Flashable Zip => https://www.androidfilehost.com/?fid=6006931924117889647
Source Code: https://github.com/N00bTree/android_...realme_charlie
@chankruze,
I have flashed this new recovery twrp PitchBlack-S3-Pro.img but not run in this device.
The phone reboot but not enter in recovery mode!!!!
Sorry can't get either .img or zip file to boot to recovery. Thanks for the effort though
ABOUT
This is an OEM Ported GSI of MIUI 11 (PIE), tested by me on Galaxy J6.
thanks to @erfanoabdi For GSI TOOLS.
This PORT is Not Made by me.
all credits to original authors.
DICLAIMER
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
No guarantees that everything would work. This is a GSI, bugs are bound to happen.
SO, Here Is The MIUI-11 GSI Working On Galaxy J6.
Follow The Instructions To Flash It .
REQUIREMENTS/DOWNLOADS :
-Unlocked Bootloader
-TWRP Installed
-GSI File 》》 DOWNLOAD
-Additional Zip Files 》》
1: DOWNLOAD
2: DOWNLOAD
3: DOWNLOAD
-GSI Patch Zip 》》 DOWNLOAD
-Additional Apk Files 》》
1: DOWNLOAD
2: DOWNLOAD
All files are associated with their original owners/Developers....
Flashing Instructions :
Unzip Downloaded GSI Image , You Got an .img file
Boot In TWRP
Wipe system, data, dalvik&cache, cache
Install Vendor.Zip file
Reboot To Recovery
Select Install Image Option In TWRP
Install extracted Image File
Again Reboot To Recover (Don't worry if no OS installed error comes just go ahead )
Now Install Additional Zip Files
Now, At last reboot to System
After First Boot, Install Both Given APK Files (Download section).
ENJOY...
video tutorial :
XDA:DevDB Information
MIUI 11, ROM for the Samsung Galaxy J
Contributors
adi_s.s, erfanoabdi, adi_s.s
ROM OS Version: 9.x Pie
Version Information
Status: Beta
Created 2020-02-09
Last Updated 2020-02-10
Works great
Works on J701MT ?!
https://pasteboard.co/IVLhw3L.jpg
Having my headphones plugged in,sound still comes out from the speaker. Also I can't find the option to register fingerprint and I have flashed the fix. Any suggestions?
Hi sir, My phone's USIM is LG U+, Can it support this network service.
My phone model is SM-J600L
i followed the instructions but when i try to boot to system it gets stuck on bootlogo. im on j710
the selfie camera not work
Code:
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
INSTALLATION
Via Reocvery :
To install an OrangeFox zip, simply flash it with OrangeFox (or any TWRP-compatible custom recovery) without any wipes - exactly the same way that you would flash any zip
Do the same thing if you want to upgrade OrangeFox
When you flash an OrangeFox zip, there is no need to flash any DFE or any other such thing
See below for detailed instructions on how to install OrangeFox via fastboot
Via Fastboot, and then recovery :
You need a PC for this. If you do not have a PC, or access to a PC, then you are stuck!
Unlock your bootloader (if not already unlocked)
Install adb, fastboot from here, and the relevant USB drivers onto your PC
Install the Mi Flash tool onto your PC (only for Xiaomi devices)
Download the correct OrangeFox zip file to your phone, and to your PC
Extract recovery.img from the OrangeFox zip file, and copy recovery.img to your PC’s adb directory
Reboot your phone into fastboot/bootloader mode
Open up a command line window / terminal emulator on your PC
Change to the adb directory on your PC
Flash OrangeFox Recovery by using the fastboot flash recovery recovery.img command
Reboot into OrangeFox by pressing the power + volume up keys, until you see the OrangeFox splash screen (the keys may be may vary on your device)
After OrangeFox has booted up, check that everything is working – eg, that it has mounted the data partition successfully, and that the touchscreen works.
Find and select the OrangeFox zip on your phone, tap on it, and swipe to install it (because OrangeFox Recovery needs some files from the zip)
After installation, the phone will automatically reboot into OrangeFox
Enjoy!
DOWNLOAD
MOD EDIT: DOWNLOAD LINK REMOVED
Features:
-Fully decryption support
-Wipe support
-Backup support
-vibration support
What doesn't work
you tell me
Thanks to @PeterCxy for the commits and the base: https://github.com/PeterCxy/android_device_xiaomi_violet-twrp
Thanks for @mauronofrio for original raphael device tree: https://github.com/mauronofrio/android_device_xiaomi_raphael
TeamWin - for TWRP
The OrangeFox Team - for your hard work
Thread closed until kernel sources are provided.
OP: Please check your PM-Inbox for more informtion.
You can read about it HERE why it's mandatory to post actual kernel sources according to GPLv2.
Thanks
strongst
Forum Moderator
Code:
* Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* before flashing GSI! YOU are choosing to make these modifications, and if
* you blame me in any way for what happens to your device, I will laugh at you.
* BOOM! goes the dynamite
Requirements:
- Unlocked Bootloader
- TWRP Recovery: Download Here
- Vbmeta Files: Download Here
- Computer with ADB & Fastboot installed: Download Here
- Custom ROM GSI System Image (List of Some: Here)
Type of GSI to be Downloaded: ARM64 - A/B
Recommendation: to avoid bugs, I recommend flashing a rom in the android version equal to the one on your stock system, and if you want to flash a different version, I recommend flashing the stock version of the intended version first (Guide Here).
How to install: (Video Guide: Here)
1. Create a folder and inside it extract the compressed downloaded files of TWRP, GSI and VBMETA.
2. Rename the img file extracted from gsi to system.img and also renamed the img file extracted from twrp to recovery.img.
3. With phone off hold volume down while turning power on to boot your device into the fastboot.
4. Open computer terminal in this folder and connect your device to the computer.
5. In the computer terminal type:
fastboot flash recovery recovery.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot --disable-verity --disable-verification flash vbmeta_system vbmeta_system.img
fastboot reboot fastboot
fastboot erase system
fastboot flash system system.img
fastboot -w
fastboot reboot
6. Done!
Note: bugs and errors are totally dependent on the compatibility of the GSI you downloaded, so if you test some GSI with bugs or with fewer functions it doesn't mean that all will be the same, study and look for more stable GSI.
SrCDA said:
Code:
* Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* before flashing GSI! YOU are choosing to make these modifications, and if
* you blame me in any way for what happens to your device, I will laugh at you.
* BOOM! goes the dynamite
Requirements:
- Unlocked Bootloader
- Stock Recovery: Download Here
- Vbmeta Files: Download Here
- Computer with ADB & Fastboot installed: Download Here
- Custom ROM GSI System Image (List of Some: Here)
Type of GSI to be Downloaded: ARM64 - A/B
Recommendation: to avoid bugs, I recommend flashing a rom in the android version equal to the one on your stock system, and if you want to flash a different version, I recommend flashing the stock version of the intended version first (Guide Here).
How to install:
1. With phone off hold volume down while turning power on to boot your device into the fastboot.
2. Open computer terminal in this folder and connect your device to the computer.
3. In the computer terminal type:
fastboot flash recovery recovery.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot --disable-verity --disable-verification flash vbmeta_system vbmeta_system.img
fastboot reboot fastboot
fastboot flash system system.img
fastboot reboot recovery
4. Format the data.
5. Done!
Click to expand...
Click to collapse
can you make a video tutorial?
luki2411 said:
can you make a video tutorial?
Click to expand...
Click to collapse
soon I will
Nice guide. But Neo2 has "super" partition, not "system".
Spl1tz said:
Nice guide. But Neo2 has "super" partition, not "system".
Click to expand...
Click to collapse
That's why you have to go to fastbootd where the super is managed, if you follow the guide it will work.
SrCDA said:
soon I will
Click to expand...
Click to collapse
Yes please make vedio as soon as possible
SrCDA said:
That's why you have to go to fastbootd where the super is managed, if you follow the guide it will work.
Click to expand...
Click to collapse
I did follow your guide. So why does it fail for me when I try to flash to "system" but works when I flash it on "super"? (but the ROMs never booted anyway, goes back to recovery)
I know other phones use "system" tho, but I've been flashing A11 and A12 back and forth using "super" on this phone the past few days.
Tried on 2 different GSI ROMS.
Made sure It's same Android version, official or unofficial and everything...
Spl1tz said:
I did follow your guide. So why does it fail for me when I try to flash to "system" but works when I flash it on "super"? (but the ROMs never booted anyway, goes back to recovery)
I know other phones use "system" tho, but I've been flashing A11 and A12 back and forth using "super" on this phone the past few days.
Tried on 2 different GSI ROMS.
Made sure It's same Android version, official or unofficial and everything...
Click to expand...
Click to collapse
if system flash fails, it's because you are trying to flash on bootloader, or your adb version is outdated.
SrCDA said:
Code:
* Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* before flashing GSI! YOU are choosing to make these modifications, and if
* you blame me in any way for what happens to your device, I will laugh at you.
* BOOM! goes the dynamite
Requirements:
- Unlocked Bootloader
- TWRP Recovery: Download Here
- Vbmeta Files: Download Here
- Computer with ADB & Fastboot installed: Download Here
- Custom ROM GSI System Image (List of Some: Here)
Type of GSI to be Downloaded: ARM64 - A/B
Recommendation: to avoid bugs, I recommend flashing a rom in the android version equal to the one on your stock system, and if you want to flash a different version, I recommend flashing the stock version of the intended version first (Guide Here).
How to install: (Video Guide: Here)
1. Create a folder and inside it extract the compressed downloaded files of TWRP, GSI and VBMETA.
2. Rename the img file extracted from gsi to system.img and also renamed the img file extracted from twrp to recovery.img.
3. With phone off hold volume down while turning power on to boot your device into the fastboot.
4. Open computer terminal in this folder and connect your device to the computer.
5. In the computer terminal type:
fastboot flash recovery recovery.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot --disable-verity --disable-verification flash vbmeta_system vbmeta_system.img
fastboot reboot fastboot
fastboot erase system
fastboot flash system system.img
fastboot -w
fastboot reboot
6. Done!
Note: bugs and errors are totally dependent on the compatibility of the GSI you downloaded, so if you test some GSI with bugs or with fewer functions it doesn't mean that all will be the same, study and look for more stable GSI.
Click to expand...
Click to collapse
Thanks. Very helpful
Thanks for this guide!
I followed your instructions and it worked, you are awesome. if my phone is rui 3.0 adrorid 12 can i install android 13 Custom ROM GSI System image.hope to hear from you soonest