Question RGB turn off when use camera app - ASUS ROG Phone 5 / 5s

Hi everyone,
I want to ask solution for my problem. After last update .86 I cannot turn on rgb when I use camera app. It's automatically turn off when I open camera app. Any solution so I can still turn on rgb when I use camera app?

Add the camera app to armory crate and do it that way? Might work.

twistedumbrella said:
Add the camera app to armory crate and do it that way? Might work.
Click to expand...
Click to collapse
Doesn't work. Already tried it

TheWolfOne said:
Doesn't work. Already tried it
Click to expand...
Click to collapse
Anything else you've tried?

twistedumbrella said:
Anything else you've tried?
Click to expand...
Click to collapse
Just that
This is happen after .86 update

If that's the case, then you would need someone to come up with a Magisk module or some other method to override the system. Sounds like they did it to avoid the lights interfering with the camera, which means they likely have no intention of it being optional.

Related

Flash Blink Camera Flash Notification

Hi everyone,
I found a great app that can blink LED when you get whatsapp/sms/incoming call notifications. Link is below. It works fine, is very much customizable. however it does cause force close once in 2 days or so. The dev might not support this project further, can anyone fix the fcs if possible?
Also, the whatsapp function does not support devices like xperia arc. Is it fixable?
Thanks, enjoy
All credit goes to Faiyyaz!
http://forum.xda-developers.com/showthread.php?t=1556118
jakhan86 said:
Hi everyone,
I found a great app that can blink LED when you get whatsapp/sms/incoming call notifications. Link is below. It works fine, is very much customizable. however it does cause force close once in 2 days or so. The dev might not support this project further, can anyone fix the fcs if possible?
Also, the whatsapp function does not support devices like xperia arc. Is it fixable?
Thanks, enjoy
All credit goes to Faiyyaz!
http://forum.xda-developers.com/showthread.php?t=1556118
Click to expand...
Click to collapse
How about ButtonLED ? both of them do the same job?
Shyam said:
How about ButtonLED ? both of them do the same job?
Click to expand...
Click to collapse
No. Button LED is front side. Flashblink blinks the back flash. Like Iphone.
http://youtu.be/kFOMWzi-sSo
jakhan86 said:
No. Button LED is front side. Flashblink blinks the back flash. Like Iphone.
http://youtu.be/kFOMWzi-sSo
Click to expand...
Click to collapse
No. ButtonLED also has the option to choose the camera flash instead of hardware key backlight

?? change button brightness

Hello folks,
does anybody know, if it is possible to change the brightness of the capacitive buttons? Maybe some kind of app or xposed module? It is really a pain in the eye, if the display itself is acceptably dark but everytim you use the buttons it is like a kind of little flash - and yes, i know that i can disable them. But that is not the thing i want.
Hi
Is not quite what you want...is an old app and i have not tested on the S7
https://play.google.com/store/apps/details?id=com.haxor&hl=es
Thanks, but this is a simple overlay for the display. I am looking for something to dim the buttons only.
gedhe said:
Hello folks,
does anybody know, if it is possible to change the brightness of the capacitive buttons? Maybe some kind of app or xposed module? It is really a pain in the eye, if the display itself is acceptably dark but everytim you use the buttons it is like a kind of little flash - and yes, i know that i can disable them. But that is not the thing i want.
Click to expand...
Click to collapse
Where can I disable the buttons? I could find some timea ago but not anymore.
mrhizzo said:
Where can I disable the buttons? I could find some timea ago but not anymore.
Click to expand...
Click to collapse
Hi
Check this app
Or this thread is for the S6 and you need to be root but probably works
Since those buttons are LEDs, correct me if I am wrong, you could adjust their brightness PWM style but that would require an app that would disable and enable them many times a second to not see flickering. That would eat some processing power, albeit little. And I am also pretty sure this would require root if it's actually possible at all. Don't know about any apps that do this, also wanted one for myself.
mrhizzo said:
Where can I disable the buttons? I could find some timea ago but not anymore.
Click to expand...
Click to collapse
If you're in a power saving mode, it disables the button lights.

Pixel Props causing Brightness issues. Anyone faced similar problems?

I have a rooted Indian version of OnePlus 8T.
Everytime I try to change my device props to Pixel props via directly flashing the pixel props file or using "Magisk Hide Props" module - the display brightness breaks.
While the lock screen is still okay and the brightness behaves normally but as soon as you unlock the phone it goes too dim. Sliding the brightness panel doesn't do anything and neither does disabling adaptive brightness. I've stumbled across months old posts about someone having the same issue with Oneplus 8 Pro but didn't find any solution there either.
Please, anyone let me know if you can somehow get around those problems?
Thank you!
Hi,
Did you find any solution. It seems that it breaks the highest available brightness on the device . I am not sure how to enable that
Hey,
Does anyone got a chance to have a fix for this? I have the same issue with a oneplus 8, and i can't find any solution yet..
Removing the "system.props" from the module breaks the feature of the module
Inervo said:
Hey,
Does anyone got a chance to have a fix for this? I have the same issue with a oneplus 8, and i can't find any solution yet..
Removing the "system.props" from the module breaks the feature of the module
Click to expand...
Click to collapse
Hi, Did you find any solution? I have same problem.
sjgoel said:
Hi, Did you find any solution? I have same problem.
Click to expand...
Click to collapse
I actually do have a *partial* solution to this. If you were changing the fingerprint to enable call screening or call recording in Google Phone, then the solution is to use Google Dialer Mod instead. It's a root app that has toggles which literally allow you to turn on Call Screening, Call Recording, and pretty much any other Google Phone feature you'd want to enable. No fingerprinting necessary. If you were trying to get other pixel mods, unfortunatley I have no answer to that.

Brightness issue with Pixel mod in OOS

Hey Everyone,
I was able to get all Pixel features like photos unlimited, call screen, hold for me in OOS using this Magisk Module.
But upon installing, the brightness of the device is set to low and completely broken so it doesn't change. Did anyone able to run it and fix this?
I was able to use it by going in to fingerprint and click add fingerprint which brings the brightness back to normal and quit the fingerprint by swiping in notifications and the brightness presists but that's not usable in long term
Edit1: Seems like I was wrong. All the features are getting turned off one by one.
Writing here for anyone who wants to get pixel features in oxygen os rather than AOSP.
I was able to solve the issue. All I had to do is delete the system.prop file from the module and install it. Now the photos shows unlimited uploads and I don't have the brightness issue.
Hey,
Does anyone got a chance to have a fix for this? I have the same issue with a oneplus 8, and i can't find any solution yet..
As stated, removing the "system.props" from the module breaks the feature of the module
5ud0 said:
Edit1: Seems like I was wrong. All the features are getting turned off one by one.
Writing here for anyone who wants to get pixel features in oxygen os rather than AOSP.
I was able to solve the issue. All I had to do is delete the system.prop file from the module and install it. Now the photos shows unlimited uploads and I don't have the brightness issue.
Click to expand...
Click to collapse
I have same issue... I got call screening Pixel feature in Oxygen by changing device fingerprint but have same screen brightness problem.
Can you please some detail of how to delete the system.prop file in the module and then install it.
5ud0 said:
Hey Everyone,
I was able to get all Pixel features like photos unlimited, call screen, hold for me in OOS using this Magisk Module.
But upon installing, the brightness of the device is set to low and completely broken so it doesn't change. Did anyone able to run it and fix this?
I was able to use it by going in to fingerprint and click add fingerprint which brings the brightness back to normal and quit the fingerprint by swiping in notifications and the brightness presists but that's not usable in long term
Click to expand...
Click to collapse
Inervo said:
Hey,
Does anyone got a chance to have a fix for this? I have the same issue with a oneplus 8, and i can't find any solution yet..
As stated, removing the "system.props" from the module breaks the feature of the module
Click to expand...
Click to collapse
sjgoel said:
I have same issue... I got call screening Pixel feature in Oxygen by changing device fingerprint but have same screen brightness problem.
Can you please some detail of how to delete the system.prop file in the module and then install it.
Click to expand...
Click to collapse
I actually have a *partial* solution to this. If you are changing the fingerprint to enable call screening or call recording in Google Phone, then the solution is to use Google Dialer Mod instead. It's a root app that has toggles which literally allow you to turn on Call Screening, Call Recording, and pretty much any other Google Phone feature you'd want to enable. No fingerprinting necessary. If you were trying to get other pixel mods, unfortunately I have no answer to that.

How to set GCam as standard?

Hello,
i tried to set GCam as standard, but I failed. I cannot change it to standard even if I disable the stock one. GCam not showing up in Default Apps -> Camera. After disabling the stock cam it just cannot open camera from lockscreen, so it doesn't recognize GCam as "true" App.
Any advice from your site?
The way I did it is I enabled the double tap power button to launch camera gesture, then the phone offered me to choose a camera app and use it as default.
robogo1982 said:
The way I did it is I enabled the double tap power button to launch camera gesture, then the phone offered me to choose a camera app and use it as default.
Click to expand...
Click to collapse
Which version of gcam do you use use?
Dracoeta said:
Which version of gcam do you use use?
Click to expand...
Click to collapse
Not sure. Works with all of them though.
robogo1982 said:
Not sure. Works with all of them though.
Click to expand...
Click to collapse
And which phone do you have? I got a pocophone f2 pro and enabling doubling tapping the on off button to open the camera isn't working for me. There is still the problem, that gcam don't show up on the standard camera option
Dracoeta said:
And which phone do you have? I got a pocophone f2 pro and enabling doubling tapping the on off button to open the camera isn't working for me. There is still the problem, that gcam don't show up on the standard camera option
Click to expand...
Click to collapse
Well... this *is* the Poco X3 NFC section of the forum...
robogo1982 said:
Well... this *is* the Poco X3 NFC section of the forum...
Click to expand...
Click to collapse
Oh sorry :/

Categories

Resources