Question Does the U1 firmware care if the phone is still locked? - Samsung Galaxy S21+

So the other day I got my S21+ in the mail from Verizon. I immediately flashed the U1 firmware without first activating the phone(I know, dumb for various reasons). But now when I put my sim card in it activates for a few minutes before saying I can't use this phone on another network currently. Even though it's a Verizon phone and service.

Yes, flash the verizon first. Then activate it.
Then flash U1 if you want.

Kenora_I said:
Yes, flash the verizon first. Then activate it.
Then flash U1 if you want.
Click to expand...
Click to collapse
And after it activates with the verizon firmware it won't care if I flash it to U1 after that? Or should I wait the 60 days for verizon to unlock it?

Kenora_I said:
Yes, flash the verizon first. Then activate it.
Then flash U1 if you want.
Click to expand...
Click to collapse
Also do you know a good place to get verizon

sammobile has all the varient firmwares.

Kenora_I said:
sammobile has all the varient firmwares.
Click to expand...
Click to collapse
Nothing new enough for me to flash over the most recent firmware sadly.

Related

Update without Verizon sim card

Hi Folks, I got this Verizon galaxy s6. I do not have an active Verizon sim card. How could I update through OTA now.
Please help me. Thanks a ton.
You can't. However, you can plug into a PC, download SmartSwitch, and upgrade through that.
Take it to Best Buy's Samsung store and ask for the latest update. They can do it there. I have done it on the Verizon S6 and the Note 5.
Illogi.xbone said:
You can't. However, you can plug into a PC, download SmartSwitch, and upgrade through that.
Click to expand...
Click to collapse
I am having same issue. I am using Verizon unlocked phone in Australia. Can I flash stock rom to latest update.? I am stuck on 5.1.1 will it relock to Verizon?
softkun123 said:
I am having same issue. I am using Verizon unlocked phone in Australia. Can I flash stock rom to latest update.? I am stuck on 5.1.1 will it relock to Verizon?
Click to expand...
Click to collapse
Verizon does not have sim lock so it shouldn't. You can just flash up or if you want, use smart switch as I stated above. It will allow you to update as well.
Illogi.xbone said:
Verizon does not have sim lock so it shouldn't. You can just flash up or if you want, use smart switch as I stated above. It will allow you to update as well.
Click to expand...
Click to collapse
I tried smart switch but no update available for my baseband...can I flash stock rom of different baseband?
softkun123 said:
I tried smart switch but no update available for my baseband...can I flash stock rom of different baseband?
Click to expand...
Click to collapse
What are you currently on?
Illogi.xbone said:
What are you currently on?
Click to expand...
Click to collapse
Baseband bok7

[FIRMWARE] G950U1 Unlocked AT&T QK2

As of this writing (11/29/2017) this is the latest firmware for the G950U1 att unlocked S8 . I'm leaving this here for reference so people can return to it if/when they need it.
Download, extract, remove .md5 file name off the end of each file, flash.
G950U1UEU2AQK2 (This WILL update your bootloader so after this, no going to QH3 or before. Not that you'd have a reason to)
https://drive.google.com/open?id=1gvQ0kaZTwbEYe2jvuIa05pCvwkS4ddtg
joe3681 said:
As of this writing (11/29/2017) this is the latest firmware for the G950U1 att unlocked S8 . I'm leaving this here for reference so people can return to it if/when they need it.
Download, extract, remove .md5 file name off the end of each file, flash.
G950U1UEU2AQK2 (This WILL update your bootloader so after this, no going to QH3 or before. Not that you'd have a reason to)
https://drive.google.com/open?id=1gvQ0kaZTwbEYe2jvuIa05pCvwkS4ddtg
Click to expand...
Click to collapse
you donnt need to remove the .md5
you will need modded odin though.
mweinbach said:
you donnt need to remove the .md5
you will need modded odin though.
Click to expand...
Click to collapse
You don't need to no, but it speeds up the process. I'm just posting firmware not making a hand holding tutorial. There's enough of those around
Thanks Joe I was tired of returning all the way back to the beginning and getting all those new updates on my unlocked S8
joe3681 said:
You don't need to no, but it speeds up the process. I'm just posting firmware not making a hand holding tutorial. There's enough of those around
Click to expand...
Click to collapse
Yeah and on a Mac you do need to, or it freezes Odin completely
If I flash unbranded FW on a carrier specific device, loke tmo or att for example, would it sim unlock the phone?
If I flash tmo FW on an att s8 would it in turn allow me to use the att original device on tmo? I ask these questions because I feel like it would work for both my questions since flashing the FW flashes both boot, kernel and baseband/radio. The which is needed for signal. Just some theories but would love to know the answers.
Btw, I have a F model S8+ and was planning on buying some US branded devices so I was curious.
this.guy.lol said:
If I flash unbranded FW on a carrier specific device, loke tmo or att for example, would it sim unlock the phone?
If I flash tmo FW on an att s8 would it in turn allow me to use the att original device on tmo? I ask these questions because I feel like it would work for both my questions since flashing the FW flashes both boot, kernel and baseband/radio. The which is needed for signal. Just some theories but would love to know the answers.
Btw, I have a F model S8+ and was planning on buying some US branded devices so I was curious.
Click to expand...
Click to collapse
No, it will not unlock the phone (Note: Verizon phones are factory unlocked and remain that way after a firmware flash)
Yes, you can flash any carriers FW to a US S8 and use it with a different carrier.
So I understand, your saying if I flash att FW to a T-Mobile s8 I can use it on tmobile? If that is the case, to me that's an unlock of sorts tiny book lol. Just wanna make sure is all
Deleted
this.guy.lol said:
So I understand, your saying if I flash att FW to a T-Mobile s8 I can use it on tmobile? If that is the case, to me that's an unlock of sorts tiny book lol. Just wanna make sure is all
Click to expand...
Click to collapse
You can flash att firmware and use it on TMobile but it will still be locked to TMobile. Just running att firmware.
joe3681 said:
You can flash att firmware and use it on TMobile but it will still be locked to TMobile. Just running att firmware.
Click to expand...
Click to collapse
Just realized the typo.....what I meant was, if I flash ATT on a TMO variant I can use ATT while locked to tmo? I'm very unfimiar with combination fw and always opted for the UK models for alot of reasons. Sorry for the confusion of my op question. I know on the s7 and edge if you flashed the US unlocked firmware it not only removed AOL bloat but it unlocked the device. So that is why I ask.
this.guy.lol said:
Just realized the typo.....what I meant was, if I flash ATT on a TMO variant I can use ATT while locked to tmo? I'm very unfimiar with combination fw and always opted for the UK models for alot of reasons. Sorry for the confusion of my op question. I know on the s7 and edge if you flashed the US unlocked firmware it not only removed AOL bloat but it unlocked the device. So that is why I ask.
Click to expand...
Click to collapse
I had a TMobile S7 edge and flashing unlocked firmware never unlocked the device. That's handled by TMobile servers so...
Flashing unlocked firmware will give you just that. The smoother, bloat free firmware from another device but not the actual sim unlock.
I bought an unlocked device and wanted wifi calling so I flashed the g950usqs1aqf7 att firmware with Odin and it worked to enable wifi calling but I'm unable to get any ota updates and I hate the bloat. Is it possible to get WiFi calling with an unlocked firmware like this one? Also what is the difference between the U and U1 firmware variants?
maquino1985 said:
I bought an unlocked device and wanted wifi calling so I flashed the g950usqs1aqf7 att firmware with Odin and it worked to enable wifi calling but I'm unable to get any ota updates and I hate the bloat. Is it possible to get WiFi calling with an unlocked firmware like this one? Also what is the difference between the U and U1 firmware variants?
Click to expand...
Click to collapse
There are plenty of threads on this, but I don't think anyone was ever successful. I flashed att Oreo to my u1 and got the options, but can't get my company to change my imei back.... My personal phone sim works fine. Quit at that point since it's an Ims registration error. You can try merging the wifi calling apks, but I'm pretty sure it's baked pretty deep in the os. The Verizon guys got some of it working. You can try their threads and see if any of it applies to us.
twizt3d said:
There are plenty of threads on this, but I don't think anyone was ever successful. I flashed att Oreo to my u1 and got the options, but can't get my company to change my imei back.... My personal phone sim works fine. Quit at that point since it's an Ims registration error. You can try merging the wifi calling apks, but I'm pretty sure it's baked pretty deep in the os. The Verizon guys got some of it working. You can try their threads and see if any of it applies to us.
Click to expand...
Click to collapse
Thanks. Some threads made it sound possible but inconclusive. I'll just assume it doesn't work.
BTW, can you link to the att oreo fw? And what do u flash that with Odin or comsey?
The thread right below this one entitled Oreo ota has all the details and it needs to be side loaded through adb. Not Odin. But you will need to Odin the 950u base to get off u1
twizt3d said:
The thread right below this one entitled Oreo ota has all the details and it needs to be side loaded through adb. Not Odin. But you will need to Odin the 950u base to get off u1
Click to expand...
Click to collapse
Ok thanks. I need to flash anyways because I'm having terrible battery issues and just debating whether to go to a newer version of 950u or back to U1 and losing WiFi calling. In your opinion is oreo beta worth it
So just to confirm, I have read everything, but I am just a bit confused. If I flashed the unlocked firmware via modified odin on a locked AT&T S8 it will remove a lot of the carrier bloat and give my my wifi hotspot back, but remove wifi calling. Similar to when I flashed the T-Mobile firmware on my AT&T S7 and got rid of a ton of the AT&T bloatware but was able to activate my wifi hotspot but lost wifi calling. I stay locked to AT&T which is fine that is not my purpose for flashing
---------- Post added at 07:03 AM ---------- Previous post was at 07:01 AM ----------
and can you re-upload the link is dead now
The links don't work. Any chance you've still got the firmware? I've been overseas since october. I have an unlocked AT&T phone that I intend to keep using when I get back, so I want to keep it AT&T FW.
Hi.
I have a G955U Galaxy S8+ AT&T Factory Unlocked on Android 7.0
Baseband Version: G955USQU1AQD9
Android Security Patch Level - April 1, 2017
I no longer live in the US, and currently in the Philippines. Phone works great and the signal is too and all, but I cannot get OTA updates.
Can I just download the firmware file in this thread and flash straight through ODIN, or do I need to follow another guide?

What is the difference between the G955U and the G955U1?

I have a G955U1, is this ANY different than the G955U? Besides the name, I mean. Can I flash G955U firmware on my G955U1? Thanks.
G955U is USA carrier locked and G955U1 USA Unlocked
thunderroid said:
G955U is USA carrier locked and G955U1 USA Unlocked
Click to expand...
Click to collapse
Sorry for the noob question does this mean I can install G955U1 USA Unlocked firmware on my G955U carrier locked without any issues
turboedm said:
I have a G955U1, is this ANY different than the G955U? Besides the name, I mean. Can I flash G955U firmware on my G955U1? Thanks.
Click to expand...
Click to collapse
Simply put. There is no bloat. You'll get all the features samsung intended on their phones. You won't get features from carrier phones.
but in G955U1 the bootloader is locked
thunderroid said:
G955U is USA carrier locked and G955U1 USA Unlocked
Click to expand...
Click to collapse
If I flash the U1 firmware on my phone with 955U, will I be able to return back to 955U if I do not like it?? What is the advantage of U1 on my ATT 955U phone??
tailgunner9 said:
If I flash the U1 firmware on my phone with 955U, will I be able to return back to 955U if I do not like it?? What is the advantage of U1 on my ATT 955U phone??
Click to expand...
Click to collapse
I have been asking a lot about this myself. i am on tmobile. not sure if i want to make the leap to unlocked. want to keep visual voicemail, wifi calling, rcs support and what not. but i want to get in on the beta for pie. running drl7 now but the video bug with netflix and what not is annoying.
The u1 is bootloader locked. The u firmware is bootloader locked
If you own a u device and it is not sim unlocked the only advantage u1 firmware give is carrier bloat.
The u1 firmware can be flashed on a u device. But other than listed above no other perks come from this.
TheMadScientist said:
The u1 is bootloader locked. The u firmware is bootloader locked
If you own a u device and it is not sim unlocked the only advantage u1 firmware give is carrier bloat.
The u1 firmware can be flashed on a u device. But other than listed above no other perks come from this.
Click to expand...
Click to collapse
I can semi-confirm this. From the recovery menu I can select bootloader and it boots to SOMETHING.....but it looks like it's booting to their downloader version and not what people would traditionally see from a normal bootloader screen. I do know this screen does NOT work for having the phone detected by Platform Tools so no way to use that at all as far as I can see. UGH. I swear I should have just bought a Pixel 2 when I had the chance. GODS Samsung is annoying. :crying:
RangerVegas said:
I can semi-confirm this. From the recovery menu I can select bootloader and it boots to SOMETHING.....but it looks like it's booting to their downloader version and not what people would traditionally see from a normal bootloader screen. I do know this screen does NOT work for having the phone detected by Platform Tools so no way to use that at all as far as I can see. UGH. I swear I should have just bought a Pixel 2 when I had the chance. GODS Samsung is annoying. :crying:
Click to expand...
Click to collapse
Your not god
RangerVegas said:
I can semi-confirm this. From the recovery menu I can select bootloader and it boots to SOMETHING.....but it looks like it's booting to their downloader version and not what people would traditionally see from a normal bootloader screen. I do know this screen does NOT work for having the phone detected by Platform Tools so no way to use that at all as far as I can see. UGH. I swear I should have just bought a Pixel 2 when I had the chance. GODS Samsung is annoying. :crying:
Click to expand...
Click to collapse
When you click reboot to bootloader it takes you to what as known as download mode which is how we flash stock firmware. And maybe a couple other things but yea mainly for stock firms. Its used by a program called odin and the latest is 3.13 i believe.
TheMadScientist said:
When you click reboot to bootloader it takes you to what as known as download mode which is how we flash stock firmware. And maybe a couple other things but yea mainly for stock firms. Its used by a program called odin and the latest is 3.13 i believe.
Click to expand...
Click to collapse
Yea hopefully someone will respond to my main question in the noobie thread. Or maybe you would know. So I know Odin is the program Samsung uses to load new ROM on a phone. And I thought I read somewhere that there was a modified version of Odin that someone made that could install new/different ROM's. But I also saw in another message that either the current version of Odin, or the current version of the modified Odin could still load other ROM's and that someone had tested this. So that was my original primary question.
Is there a way I can use one or the other to load a Stock Android Pie ROM like what might come with a Pixel so I can avoid all the garbageware from Samsung? Or is there a chance doing that, that I would have some of my hardware features disabled since that seems to be an issue loading a ROM from another phone? And if so. Has anyone made a ROM for Samsung phones with all the garbage programs removed? Or is it still too early in the release of Pie for Samsung for that to be a reality right now?
Thank You for the info.
RangerVegas said:
Yea hopefully someone will respond to my main question in the noobie thread. Or maybe you would know. So I know Odin is the program Samsung uses to load new ROM on a phone. And I thought I read somewhere that there was a modified version of Odin that someone made that could install new/different ROM's. But I also saw in another message that either the current version of Odin, or the current version of the modified Odin could still load other ROM's and that someone had tested this. So that was my original primary question.
Is there a way I can use one or the other to load a Stock Android Pie ROM like what might come with a Pixel so I can avoid all the garbageware from Samsung? Or is there a chance doing that, that I would have some of my hardware features disabled since that seems to be an issue loading a ROM from another phone? And if so. Has anyone made a ROM for Samsung phones with all the garbage programs removed? Or is it still too early in the release of Pie for Samsung for that to be a reality right now?
Thank You for the info.
Click to expand...
Click to collapse
There is a pie beta I don't know if it is official yet. If you flash the unlocked firmware I've read you lose features like WiFi calling and volte. But I have not tried pie or unlocked firm ware on mine. There is a thread on installing safestrap then doing a rooted system images then from there depending on the flashed image if you do debloat. Again I haven't tried the new root method. I'm still on a really old revision from end of 2017
TheMadScientist said:
There is a pie beta I don't know if it is official yet. If you flash the unlocked firmware I've read you lose features like WiFi calling and volte. But I have not tried pie or unlocked firm ware on mine. There is a thread on installing safestrap then doing a rooted system images then from there depending on the flashed image if you do debloat. Again I haven't tried the new root method. I'm still on a really old revision from end of 2017
Click to expand...
Click to collapse
Ok thanks for the info. So apparently right now it's just a bit too early to be trying to find a Pie ROM that would work with my phone and not loose some hardware features. Which I guess makes sense since Samsung is only just now releasing it for S9's I believe in european countries I guess primarily to make sure how they borked it with their own software and tweaking didn't totally screw up their phones. Heh.
Oddly enough I got all excited when I saw it said there was an update today, but all it was for was a security update to bring it up to "Feb 1st, 2019" Android security level.
Thanks for the info about things. :good:
tailgunner9 said:
If I flash the U1 firmware on my phone with 955U, will I be able to return back to 955U if I do not like it?? What is the advantage of U1 on my ATT 955U phone??
Click to expand...
Click to collapse
YES you can Flash back to ATT U. I have done it.
What about "Smart View" (cellphone reflection in tv) in G955U1 with last Pie beta version (CRL2 -> ZSAB -> ZSBB -> ZSC2)... any issue
T0nyCr said:
What about "Smart View" (cellphone reflection in tv) in G955U1 with last Pie beta version (CRL2 -> ZSAB -> ZSBB -> ZSC2)... any issue
Click to expand...
Click to collapse
Nope... none problem... everything ok:good:
TheMadScientist said:
When you click reboot to bootloader it takes you to what as known as download mode which is how we flash stock firmware. And maybe a couple other things but yea mainly for stock firms. Its used by a program called odin and the latest is 3.13 i believe.
Click to expand...
Click to collapse
please I wnt clarification ...I bought g955u as used phone ..I hv oreo on it is stock from HK hongkong. and I know g955u is US variants can I flash US g955u1 firmware unlocked on it or g955u unlocked? am in Africa.
thanks
folusmile said:
please I wnt clarification ...I bought g955u as used phone ..I hv oreo on it is stock from HK hongkong. and I know g955u is US variants can I flash US g955u1 firmware unlocked on it or g955u unlocked? am in Africa.
thanks
Click to expand...
Click to collapse
Yes you can flash the u1 firm Ware as long as its the same revision bootloader 5th digit from the last.
I think you have to flash the equal combination file first
TheMadScientist said:
Yes you can flash the u1 firm Ware as long as its the same revision bootloader 5th digit from the last.
I think you have to flash the equal combination file first
Click to expand...
Click to collapse
Thanks
---------- Post added at 08:51 AM ---------- Previous post was at 08:50 AM ----------
TheMadScientist said:
Yes you can flash the u1 firm Ware as long as its the same revision bootloader 5th digit from the last.
I think you have to flash the equal combination file first
Click to expand...
Click to collapse
I want to flash pie can I process?

Links for AT&T and Cricket USERDATAs

I know these are much tougher to find - can't be obtained from SamFirm or SamMobile. So I'll be uploading one for each carrier, for each bootloader version. Firmware is universal on U models so you can use the other 4 files from any other matching collection. Can probably even mix and match builds, if you can't find files for the exact same build. Can't mix and match bootloaders though, so the other 4 files have to at least be from the same bootloader.
USERDATAs for any other CSCs can be gotten from SamFirm - for the latest version. If you need an old USERDATA for a CSC that's not commonly found on SamMobile (ACG, LRA, TFN, etc), let me know and I can probably get it.
You'll need 7-zip to extract.
https://www.androidfilehost.com/?w=files&flid=283166
SC1 USERDATA was added a few days ago, for anyone wanting to jump to Pie
ATT USERDATA added for bootloader 6
bootloader 6 userdata
Sorry if I am posting in the wrong spot I am new to this forum but I was wondering if someone can extract AT&T userdata for Odin Product code ATT
PDA G950U1UES6DSG1
CSC G950U1OYM6DSG1
I had it for 5 and didn't realize that this upgrade was 6. I need my wifi calling because I am in the hospital a lot and don't have reception. Please help I would really appreciate it!
Jaldrich1992 said:
Sorry if I am posting in the wrong spot I am new to this forum but I was wondering if someone can extract AT&T userdata for Odin Product code ATT
PDA G950U1UES6DSG1
CSC G950U1OYM6DSG1
I had it for 5 and didn't realize that this upgrade was 6. I need my wifi calling because I am in the hospital a lot and don't have reception. Please help I would really appreciate it!
Click to expand...
Click to collapse
USERDATA only applies to U firmware, not to U1. If you don't have wifi calling while on U1 firmware, then you need to change to U firmware, with all of your carrier's bloatware
Cricket USERDATA added for bootloader 6
iBowToAndroid said:
ATT USERDATA added for bootloader 6
Click to expand...
Click to collapse
Thanks! I am not on AT&T but used this to enable future OTA upgrades. Other than the bloat (expected), it worked well.
rexian said:
Thanks! I am not on AT&T but used this to enable future OTA upgrades. Other than the bloat (expected), it worked well.
Click to expand...
Click to collapse
AT&T puts blocks in their firmware so that OTAs don't work if you're not using AT&T service - even if it's one of their own MVNOs. So if you're not an AT&T customer, you do NOT want to be on their firmware
What are the restrictions on userdata? I assume that the userdata should much the security level? Is there any other restriction
prince_72 said:
What are the restrictions on userdata? I assume that the userdata should much the security level? Is there any other restriction
Click to expand...
Click to collapse
It at least has to match the bootloader version. YMMV if the USERDATA isn't the exact same build as the base files
Sorry if this is a stupid question, but I have a SM-G950U1 (unlocked Galaxy S8). Can I use this to flash it to make it a SM-950U (ATT locked Galaxy S8)? I want to get the official ATT firmware to be able to use Wi-Fi calling and other ATT features.
chuckguy17 said:
Sorry if this is a stupid question, but I have a SM-G950U1 (unlocked Galaxy S8). Can I use this to flash it to make it a SM-950U (ATT locked Galaxy S8)? I want to get the official ATT firmware to be able to use Wi-Fi calling and other ATT features.
Click to expand...
Click to collapse
It won't SIM lock it. And you won't get wifi calling. But you'll get most of the rest of their features
iBowToAndroid said:
It won't SIM lock it. And you won't get wifi calling. But you'll get most of the rest of their features
Click to expand...
Click to collapse
By chance you don't know where I can find a rev 7 for cricket. Our a user data at least?
TheMadScientist said:
By chance you don't know where I can find a rev 7 for cricket. Our a user data at least?
Click to expand...
Click to collapse
Hasn't been released yet. T-Mo and Metro are the only ones who have actually gotten a rev 7 OTA so far. But i'll definitely post them when I get access to them.
I did just notice that I had never uploaded the rev 6 Cricket USERDATA, so that is done now
iBowToAndroid said:
Hasn't been released yet. T-Mo and Metro are the only ones who have actually gotten a rev 7 OTA so far. But i'll definitely post them when I get access to them.
I did just notice that I had never uploaded the rev 6 Cricket USERDATA, so that is done now
Click to expand...
Click to collapse
That's weird. I'm on revision 7 and supposedly on aio
I'm trying to get my wifi calling to work. Cricket says it will even on byod after like blq1 or some oreo firmware. On the u model. All I found was a u1
https://www.reddit.com/r/CricketWir..._source=amp&utm_medium=&utm_content=post_body
TheMadScientist said:
That's weird. I'm on revision 7 and supposedly on aio
I'm trying to get my wifi calling to work. Cricket says it will even on byod after like blq1 or some oreo firmware. On the u model. All I found was a u1
Click to expand...
Click to collapse
U1 has gotten rev 7, yes. When I said that "T-Mo and Metro are the only ones" that have gotten it, I was referring to the carriers themselves, which is U firmware.
iBowToAndroid said:
U1 has gotten rev 7, yes. When I said that "T-Mo and Metro are the only ones" that have gotten it, I was referring to the carriers themselves, which is U firmware.
Click to expand...
Click to collapse
I never could find a u firmware for cricket. I only assumed u1 existed
TheMadScientist said:
I never could find a u firmware for cricket. I only assumed u1 existed
Click to expand...
Click to collapse
Well firmware is universal - there is no such thing as "Cricket firmware". But there are Cricket USERDATAs, yes. Only thing is that their S8 hasn't gotten the rev 7 OTA yet, so the Odin files haven't been published yet either
iBowToAndroid said:
Well firmware is universal - there is no such thing as "Cricket firmware". But there are Cricket USERDATAs, yes. Only thing is that their S8 hasn't gotten the rev 7 OTA yet, so the Odin files haven't been published yet either
Click to expand...
Click to collapse
Dont know if the rev 7 is out yet do ya?
TheMadScientist said:
Dont know if the rev 7 is out yet do ya?
Click to expand...
Click to collapse
No, no rev 7 update for the AT&T or Cricket models yet

Question I have a Verizon locked S22 Ultra which Verizon unlocked but I cannot boot unlocked firmware.

Purchased Verizon locked S22 Ultra from Samsung
Switched to T-Mobile 3 months later.
Verizon said they "unlocked" it and I'm able to use the T-Mobile SIM.
What I want to get rid of is the Verizon boot logo and the pre-installed Verizon apps. Basically I want unlocked firmware.
I downloaded SM-S908U1 XAA and Odin will not load it (I'm using latest ODIN patched). I tried every single thing.
I ended up loading SM-S908U TMB, it flashed, but it's still on Verizon!
Is this hopeless at this point? Am I doing something wrong? Am I downloading the wrong firmware?
it sounds like the firmware your flashing has the crrier csc in it
gav83collins said:
it sounds like the firmware your flashing has the crrier csc in it
Click to expand...
Click to collapse
Which one do I need to download? I've been at this for hours!
https://www.sammobile.com/samsung/galaxy-s22-ultra/firmware/SM-S908U1/ATC/download/S908U1UEU1AVCK/1631595/ im in the uk, so i cant be sure this one is unbranded, but it looks to be
gav83collins said:
https://www.sammobile.com/samsung/galaxy-s22-ultra/firmware/SM-S908U1/ATC/download/S908U1UEU1AVCK/1631595/ im in the uk, so i cant be sure this one is unbranded, but it looks to be
Click to expand...
Click to collapse
Trying now, thanks!
sorry, i changed that link, its that one
gav83collins said:
sorry, i changed that link, its that one
Click to expand...
Click to collapse
I think USC is US Cellular?
is that a carrier ??? try the link again i changed it
gav83collins said:
is that a carrier ??? try the link again i changed it
Click to expand...
Click to collapse
Yup. Your link goes to USA (USC) and USC is the carrier US Cellular
ah ok ive never heard of that before, but i was out the game a while.......
maybe try an "UNKNOWN" version, but be warned, it may not be optimised to run on your specific network, so speeds "may" be lower
gav83collins said:
ah ok ive never heard of that before, but i was out the game a while.......
maybe try an "UNKNOWN" version, but be warned, it may not be optimised to run on your specific network, so speeds "may" be lower
Click to expand...
Click to collapse
TAC dind't work either :/
lmtdshady said:
Yup. Your link goes to USA (USC) and USC is the carrier US Cellular
Click to expand...
Click to collapse
Try this one https://www.androidfilehost.com/?fid=14655340768118454578
dadmi said:
Try this one https://www.androidfilehost.com/?fid=14655340768118454578
Click to expand...
Click to collapse
Will try now, thank you!
dadmi said:
Try this one https://www.androidfilehost.com/?fid=14655340768118454578
Click to expand...
Click to collapse
What is the difference betwen CSC and HOME_CSC?
lmtdshady said:
What is the difference betwen CSC and HOME_CSC?
Click to expand...
Click to collapse
dadmi said:
Try this one https://www.androidfilehost.com/?fid=14655340768118454578
Click to expand...
Click to collapse
Failed again. Wow this is hopeless.
csc wipes your data home_csc doesnt
lmtdshady said:
Failed again. Wow this is hopeless.
Click to expand...
Click to collapse
What is failing? What is the error?
If Odin is failing it's your version of Odin is not correct
I had this problem in the past with other Samsung phones, so I only buy from Samsung.. I could never get around it. Maybe there’s a hexadecimal editor if you’re feeling brave… but can you even get root with a carrier device?
lmtdshady said:
Purchased Verizon locked S22 Ultra from Samsung
Switched to T-Mobile 3 months later.
Verizon said they "unlocked" it and I'm able to use the T-Mobile SIM.
What I want to get rid of is the Verizon boot logo and the pre-installed Verizon apps. Basically I want unlocked firmware.
I downloaded SM-S908U1 XAA and Odin will not load it (I'm using latest ODIN patched). I tried every single thing.
I ended up loading SM-S908U TMB, it flashed, but it's still on Verizon!
Is this hopeless at this point? Am I doing something wrong? Am I downloading the wrong firmware?
Click to expand...
Click to collapse
Use Odin 13 patched.
joancolmenares said:
Use Odin 13 patched.
Click to expand...
Click to collapse
I did. Also used Odin 14 patched.

Categories

Resources