dear techies,
when I tried to factory reset my car head unit, its stopped here not going further, any solution for this? it was android 7.1
model : allwinner quad core t3 k2001m
Related
I brought one of these tablets, Moonar ® 9" Capacitive Screen Allwinner A13, available from amazon, as I am new I can't post links but just search Moonar ® 9" Capacitive Screen Allwinner A13 512MB 4GB Flash Nand Android 4.0 WIFI Lithium-ion 4000MAH Tablet PC Tablet Computer Flat Computer (Black) . But one day it decided it would no longer boot and is now stuck on the flashing android logo. Any help, roms, kernels, etc would be much appreciated.
Thanks
@bobjohnsonandco
Hello,
When I decided to buy tablet Vivax TPC 800
back than I thought that was good idea,now I am not so sure it was.
There is absolutely nothing about this tablet online.
Anyway,this is dual boot tablet android-windows 10
and after few weeks it just wont boot into windows anymore,android
works fine.
I tried to do windows restore but it was not successful, the setup
install windows restarts,but when it loads to a page where I need
to put basic info about country,time etc. and after i click
next to finish installation it crashes and reboot.
The only thing that I did not try is full wipe android + windows
and that is my last option.
Any help would be really,really appreciated.
Thanks in advance.
Tablet Spec:
Vivax TPC 800 Dual OS- Windows + Android
IPS/PLS,1280x800
Intel Baytrail Z3735F 1,33 Ghz Quad Core
Intel(R) HD Graphics (Gen7)
Android 4.4
Windows 10
RAM 2 GB
Ok,i was thinking to flash new rom but I can`t find Vivax Tpc 800 rom,instead I found one closest related to this one
it is ONDA V820W 8 Inch Dual OS Windows10 & Android4.4 .It has the same spec.like Vivax.Is it safe to do something like this.
tenzor1 said:
Hello,
When I decided to buy tablet Vivax TPC 800
back than I thought that was good idea,now I am not so sure it was.
There is absolutely nothing about this tablet online.
Anyway,this is dual boot tablet android-windows 10
and after few weeks it just wont boot into windows anymore,android
works fine.
I tried to do windows restore but it was not successful, the setup
install windows restarts,but when it loads to a page where I need
to put basic info about country,time etc. and after i click
next to finish installation it crashes and reboot.
The only thing that I did not try is full wipe android + windows
and that is my last option.
Any help would be really,really appreciated.
Thanks in advance.
Tablet Spec:
Vivax TPC 800 Dual OS- Windows + Android
IPS/PLS,1280x800
Intel Baytrail Z3735F 1,33 Ghz Quad Core
Intel(R) HD Graphics (Gen7)
Android 4.4
Windows 10
RAM 2 GB
Ok,i was thinking to flash new rom but I can`t find Vivax Tpc 800 rom,instead I found one closest related to this one
it is ONDA V820W 8 Inch Dual OS Windows10 & Android4.4 .It has the same spec.like Vivax.Is it safe to do something like this.
Click to expand...
Click to collapse
Did you resolve your problem?
I have the same issue
Hello,
I have this car head Unit:
- Model: Caska ca712-xl7
- Seller Model: Pumpkin RD0258 (www..amazon.co.uk/dp/B01AXMEAWS/ref=cfb_at_prodpg)
- CPU: Rockchip RK3066 Cortex A9 Dual Core 1.6GHz
- Screen Resolution: 1024*600
A few days ago i have installed a bad firmware. Now the unit is stucked in the logo screen, and i can no longer install the factory firmware that i've installed 2 weeks ago, the recovery system is not working anymore :crying:.
Can anyone please tell me if there is a way to install a recovery system or run a firmware instalation with a recovery system from the SD card?
Please HELP :crying:
Hello friend
Did you solve your problem?
I have the same CASKA CA712-XL7 unit. I think your problem is that the unit does not have the RK3066 processor as everyone says.
The unit has the ARM 32F101. I took this photo inside the unit and as you can see it has that processor.
So, did you solve your problem?
Thank you.
hello all
need rom for my brick
Diva QC-803GN 8" QUAD CORE 3G
quick specs
cpu : 1.3 GHz Quad-Core MT8382
ram : 1GB
rom : 8GB
3G and it was with android 5.1
it boot and stuck on loading.
i can go in recovery and fastboot but i can't do anything else.
i try factory reset. no luck.
I came here after I tried to replaces internal memory with usb storage.
in recovery mode i see at the top:
K706L1-V10JQXS8GF8GBG-WG03.WSVGA.125.QC-803GN
well it look like RoverPad Sky Q8 3G is same hardware.
firmware is working nice.
and now i have working tablet.
thanks all for help
this is a cheap tablet *$100 from BIg w (Australian discount department stores)
Tiltle: DGTEC 10.1" Tablet. With 2GB ram and 16GB
Brand: DG101TBIPS
Manufacture: DGTEC
Chip ROCKCHIP
RK3326
Android OS Version 9 pie
board: BND_RK3326_S863_A1.2
i was stupid and was my first flashing attempt, i flashed the boot and recovery with some random image file not knowing what i was doing, and now it wont turn on, cant get into recovery either. pc recognises it as unknown device if i use rock batchtool and install driver it see it rock usb but still connect/disconnects every few secs., so i guess i need to flash firmware (update) wtih rock_batch tools or some thing to unbrick.
CHEERS AND HOPE WE CAN ALL HELP EACH OTHER
Bump