Hello
I'm planning to buy the Mi10 lite 5g (monet). I found out that the latest firmware for it is 12.0.1.
When I buy it, I plan to use Xiaomi.eu ROM straight away after unlocking bootloader and installing twrp. But the latest Xiaomi.eu available is 11.0.4.
Suppose the device comes with 12.0.1 out of the box, can i flash 11.0.4 Xiaomi.eu via twrp onto it? Will it brick due to anti rollback protection?
I can't help with the flashing question but just wanted to say that mine came with MIUI 11(can't remember the version) out of the box. 12 is an OTA update.
i've downgraded from miui 12.0.1.0.QJIEUXM to 11.0.11.0.QJIEUXM (EEAA fastboot version) with miflash successfully, no issue for me :good:
Mi 10 Lite 5G is now available in third-party Recovery, xiaomi.EU has MIUI12 stable version and development version, which can be swipes at will.
xiaohang said:
Mi 10 Lite 5G is now available in third-party Recovery, xiaomi.EU has MIUI12 stable version and development version, which can be swipes at will.
Click to expand...
Click to collapse
Hi just looked on the Xiaomi.eu site BUT the Mi 10 lite 5g is NOT on there for Miui 12 ONLY Miui 11 stable. If you have the links can you post them thanks.
timbook2 said:
Hi just looked on the Xiaomi.eu site BUT the Mi 10 lite 5g is NOT on there for Miui 12 ONLY Miui 11 stable. If you have the links can you post them thanks.
Click to expand...
Click to collapse
Not yet miui 12 on xiaomi.eu
hello, i have mi 10 lite with miui version QJIEUVF can i change it to QJIEUXM?
Hello guys, I have a question: I want to update the firmware on my Poco and I use RROS 10. The latest firmware for European devices is already made Android11 (V12.0.8.0.r) can i still flash this with my Android 10?
Hi. As far as I know the only A11 stock ROM available for Surya is V12.0.6.0.RJGEUXM Europe Beta which you can flash over your current ROM (you'll have format data afterwards though). Don't know about this "Android11 (V12.0.8.0.r)". Better read up a bit more on this before you get your phone bricked
Thx man!
I just flashed the Xiaomi.eu rom for my Redmi Note 11 Pro+ 5G India device, according to which the device codename is peux. The same can be seen in the pinned post of this forum, which says the Indian device has the codename peux.
However, I cannot find a stock ROM with the same codename at xiaomifirmwareupdater.com.
To quote xiaomiui.net, the rom codename should be peux:
The Redmi Note 11 Pro+ 5G India model will be the same as the global Redmi Note 11 Pro 5G (veux). Although the codename is “veux”, the ROM codename is “peux”. To summarize, Redmi Note 11 Pro 5G Global (veux) will be available in India as Redmi Note 11 Pro+ 5G.
Click to expand...
Click to collapse
And as per gizmochina.com, the rom codename should be veux:
The Redmi Note 11 Pro 5G that debuted in global markets recently is codenamed as “peux,” but its ROM codename is “veux.” As can be seen in the screenshot of the Mi code shared by Xiaomiui, the device with the “peux_in” codename will be arriving in India with the Redmi Note 11 Pro+ 5G.
Click to expand...
Click to collapse
One thing is for sure. The Global Redmi Note 11 Pro and the Indian Redmi Note 11 Pro Plus have the same specs and therefore should support the same rom. This can be seen in Xiaomi.eu's download chart as well.
My only concern would be the codename reported in build props and elsewhere if I use the veux ROM from xiaomifirmwareupdater.com.
I would appreciate any kind of help/pointers.
PS: This device is not to be confused with Redmi Note 11 Pro+ China which has the codename pissaro.
/dev/encrypt said:
I just flashed the Xiaomi.eu rom for my Redmi Note 11 Pro+ 5G India device, according to which the device codename is peux. The same can be seen in the pinned post of this forum, which says the Indian device has the codename peux.
However, I cannot find a stock ROM with the same codename at xiaomifirmwareupdater.com.
To quote xiaomiui.net, the rom codename should be peux:
And as per gizmochina.com, the rom codename should be veux:
One thing is for sure. The Global Redmi Note 11 Pro and the Indian Redmi Note 11 Pro Plus have the same specs and therefore should support the same rom. This can be seen in Xiaomi.eu's download chart as well.
My only concern would be the codename reported in build props and elsewhere if I use the veux ROM from xiaomifirmwareupdater.com.
I would appreciate any kind of help/pointers.
PS: This device is not to be confused with Redmi Note 11 Pro+ China which has the codename pissaro.
Click to expand...
Click to collapse
Can you poste the rom and type version.
Ex: rom V13.0.6.0.RKCINXM
Type:2201116SG, 2201116SR,etc..
NOSS8 said:
Can you poste the rom and type version.
Click to expand...
Click to collapse
Unfortunately, I didn't record any details of the stock ROM that shipped with the device before flashing the EU ROM. I didn't anticipate such a situation.
According to getdroidtips.com, the version should be V13.0.6.0.RKCINXM.
And here's what the Xiaomi.eu ROM reports now: V13.0.14.0.RKCMIXM 2201116SI
If compared with the screenshot provided by xiaomiui.net, the EU ROM reports veux/veux:11 in the device's fingerprint (could be because it's based on global version of MIUI), while the Indian ROM reports peux_in/peux:11 in the fingerprint.
/dev/encrypt said:
Unfortunately, I didn't record any details of the stock ROM that shipped with the device before flashing the EU ROM. I didn't anticipate such a situation.
According to getdroidtips.com, the version should be V13.0.6.0.RKCINXM.
And here's what the Xiaomi.eu ROM reports now: V13.0.14.0.RKCMIXM 2201116SI
Click to expand...
Click to collapse
The closest is 2201116SC but VEUX Maybe try with MIflash
Custom rom better than stock https://xiaomi.eu/community/threads/miui-13-stable-release.64441/
You will be able to see that there are roms for PEUX and VEUX (so not the same ones).
NOSS8 said:
You will be able to see that there are roms for PEUX and VEUX (so not the same ones).
Click to expand...
Click to collapse
If you look closely, both ROM codenames have been given as VEUXG, which means that the ROMs are the same.
Also, is there a way to read build.prop from a ROM's zip file without installing it? That might resolve some doubts.
/dev/encrypt said:
If you look closely, both ROM codenames have been given as VEUXG, which means that the ROMs are the same.
Also, is there a way to read build.prop from a ROM's zip file without installing it? That might resolve some doubts.
Click to expand...
Click to collapse
It's just, I saw the top line.
It is surely good.
Is there no way to get the actual ROM that shipped with the device that will report the fingerprint to be peux_in/peux:11? Or is it the same as the veux's India ROM at xiaomifirmwareupdater.com?
I also checked their official site for ROM download, but to no avail.
/dev/encrypt said:
Or is it the same as the veux's India ROM at xiaomifirmwareupdater.net?
Click to expand...
Click to collapse
Surely but the other 5g versions too.
Alright. I just flashed the veux India ROM from xiaomifirmwareupdater.com, and I can confirm that the fingerprint has been restored to reporting peux_in/peux:11 just as it should be.
So, the answer to my original question would be:
The official stock ROM for peux devices, i.e. Redmi Note 11 Pro+ 5G India, is the Indian version of veux's ROM as listed at xiaomifirmwareupdater.com.
Hey. I have the same Indian Redmi Note 11 pro plus 5g
Snapdragon 695 model
2201116SI
peux
Miui Global 13.0.4.0 Stable RKCINXM
Android 11
Maybe I could download the latest package from the updater and upload and send you the recovery rom if you need.
But can you also explain how did you flash the eu rom and why did you switch it back to global?
Edit : Received android 12 update today.
Aadharsh.1 said:
Maybe I could download the latest package from the updater and upload and send you the recovery rom if you need.
Click to expand...
Click to collapse
Thanks for offering @Aadharsh.1, but I was able to restore back to the stock firmware using the veux ROM from the xiaomifirmwareupdater.com. It now does show the device codename to be peux.
Aadharsh.1 said:
But can you also explain how did you flash the eu rom and why did you switch it back to global?
Click to expand...
Click to collapse
I think you are confused between the official EU region ROM offered by Xiaomi and the Xiaomi.eu ROM I talked about here. The Xiaomi.eu rom is a modded version of the MIUI for this device with bloatware and ads stripped and with some added extra features. Installation process is similar to installing any other custom ROM.
Aadharsh.1 said:
Received android 12 update today.
Click to expand...
Click to collapse
I didn't receive this update yet. Let's see what happens in the next week or two. Or maybe I would have to hit you for the recovery zip after all.
Aadharsh.1 said:
Received android 12 update today.
Click to expand...
Click to collapse
I have not received the Android 12 update yet. Any idea when I can expect to receive it.
/dev/encrypt said:
I think you are confused between the official EU region ROM offered by Xiaomi and the Xiaomi.eu ROM I talked about here. The Xiaomi.eu rom is a modded version of the MIUI for this device with bloatware and ads stripped and with some added extra features. Installation process is similar to installing any other custom ROM.
Click to expand...
Click to collapse
Sorry for the late reply.
I asked why did you switch back to the global rom? I'm asking this because I wish to flash the EU rom on my device and would like to know your opinion on it.
/dev/encrypt said:
I didn't receive this update yet. Let's see what happens in the next week or two. Or maybe I would have to hit you for the recovery zip after all.
Click to expand...
Click to collapse
I get notifications for the update but I don't want to update it. A person I know has the same device and they updated it to Android 12.
The Google Dialer is full of bugs and now much worse than before. The caller id never shows up and the phone just freeze on that screen. This the reason why I decided not to update it.
Atulsnj said:
I have not received the Android 12 update yet. Any idea when I can expect to receive it.
Click to expand...
Click to collapse
They roll out the updates randomly per device. You can wait or you can find it on the internet if you want it now.
Aadharsh.1
forum.xda-developers.com
Xiaomi EU rom
https://xiaomi.eu/community/threads/miui-13-stable-release.64441/
Stock rom
EUXM=EEA Europe
MIXM=Global
TRXM=Turkey
RUXM=Russia
INXM=India
JPXM=Japan
IDXM=Indonesia
TWXM=Taiwan
CNXM=China
DEV=Public Beta
May i know the best stock rom version for Poco X3 Pro 8/256 . Im currenty in MIUI 13.0.5.
the last one. 13.0.5
I also have a Poco X3 Pro 8/256, but my MIUI version is 12.5.5, with no updates available.
How can I upgrade to the newer version?
hduty said:
I also have a Poco X3 Pro 8/256, but my MIUI version is 12.5.5, with no updates available.
How can I upgrade to the newer version?
Click to expand...
Click to collapse
If you are using the EEA (EU version) then you still have to wait for an OTA update. The 13.0.1 is no longer offered via OTA and the 13.0.2 as well as the 13.0.3 have been pulled by Poco (Xiaomi).
However, you could download the required recovery update and update it manually to at least 13.0.1. You can find the required update file in the following link.
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
POCO X3 Pro EEA Stable Recovery V13.0.1.0.SJUEUXM 12.0
This would be the correct file if you currently have 12.5.5 EEA installed.
Just Google how to manually flash a recovery update.
The exact version is 12.5.5.0 (RJUEUXM)
Is that the EU version?
The last security update is from Jan.
Is it normal to receive almost no security patches, and no new MIUI version?
Thanks!
hduty said:
The exact version is 12.5.5.0 (RJUEUXM)
Is that the EU version?
Click to expand...
Click to collapse
Yes, that's the EU (EEA) version. The security updates are delivered around 4-5 times per year and MIUI updates always take a while outside China. In the case of Android 12 (MIUI 13), we were unlucky because those updates were pulled due to some bugs that I personally never noticed. For me, the 13.0.3 runs super stable, as did the 13.0.1 and 13.0.2 before.
Thanks for clarifying.
The Poco isn't my main phone, it's been sitting in drawer for a year. Meanwhile my midrange Samsung from +2years ago receives constant updates,, hence my surprise.
Guys, I'm a newbie with this problem, I need help to update from MIUI version 13.0.5 to 13.0.8-13.0.9 GLOBAL on my POCO X3 PRO, I received the update from 13.0.5 a while ago and after that it doesn't I received updates again, I've watched a few videos and I can't find the solution, it seems that 13.0.5 is dead for everyone hahaha.
If you could provide any video or guide on how to update it using Recovery, I already tried updating manually from the internal configuration of the mobile and it won't let me, if you could show me how to do it from Recovery I would really appreciate it, I just want to get out of 13.0.5
flashing only the firmware update is just for custom roms.
you can download only the firmware for your region in this thread:
[MIUI Updates Tracker] POCO X3 Pro (vayu)
MIUI Updates Tracker (POCO X3 Pro) What is MIUI Updates Tracker? An open-source project that automatically tracks Xiaomi MIUI ROM releases! MIUI Updates Tracker is a sibling project of Xiaomi Firmware Updater. Actually, XFU depends on it for...
forum.xda-developers.com
1 download the firmware
2 boot in recovery twrp
3 flash it reboot
4 reboot
you don't need to wipe anything before or after. but this only works on custom roms.
for stock rom you need to download the fastboot rom (like 5.xxgb) of miui stock rom to update the firmware. currently it is on miui14 (V14.0.1.0.TJUMIXM)