Related
Stock Android 7.0 (Nougat) for the Moto X Pure 2015 XT1575 US NPH25.200-22
TWRP Recovery Image (Includes /boot and /system only)
**Factory reset after restore is advised.**
https://drive.google.com/drive/folders/0B2lKWOIH0bTqc29NbVNWWWhsYVE?usp=sharing
**Not tested coming straight from stock 6.0 MPH24.49-18-16.**
I did an incremental OTA upgrade from stock 6.0 MPH24.49-18-8.
Use at your own risk. If you have TWRP installed your warranty is void anyway. I'm not responsible for bricking your device.
worked great for me 18-16 thanks really appropriate the work
Hi
and thx for sharing.
I have unlocked booloader and rooted, can I just flash this one with twrp?
thx in advance
the-light said:
Hi
and thx for sharing.
I have unlocked booloader and rooted, can I just flash this one with twrp?
thx in advance
Click to expand...
Click to collapse
Yes. Root is nonconsequential. You really just need twrp.
Can i just flash it over TruPureX Android 6?
(I guess i can, just want to be sure)
Where can I find Android 7 modem to flash separately?
Will it work with Android 6 modem?
newHere:) said:
Can i just flash it over TruPureX Android 6?
(I guess i can, just want to be sure)
Where can I find Android 7 modem to flash separately?
Will it work with Android 6 modem?
Click to expand...
Click to collapse
No Nougat modem is available until the flashable (non OTA) full stock 7.0 rom is made available from Motorola. This is not likely to happen. No issues have been mentioned running this update on a 6.0 modem. Not sure what the advantages are honestly. I never had problems with bt, wifi, or calls with the 6.0 modem firmware.
Create a backup beforehand and you can always go back to it.
hi i noob, i speak spanish.
I have moto x pure clark xt1575, android 6 no root, i install twrp an unlock bootloader.
I try to install this "ota" room, but fail. i restore back up and now the phone follow work
mphs24.49-18-16.
Need help how instal android 7 official, or only way custom room "lineage 14"
Thanks.
Can I flash this over Lineage OS 14.1 after a full wipe?
acoupleofdroids said:
worked great for me 18-16 thanks really appropriate the work
Click to expand...
Click to collapse
Hi talk about u experience
Greetings, it counts as you did, I have android 6.0 mphs24.49-18-16 and I can not update. Phone with bootloader unlocked and with twrp, no root
I get "invalid ZIP file format" using TWRP 3.1.1-0 on an XT1575. Was running lineageOS 14.1 but I wiped system and data before trying to install the zip. On my laptop I can open the ZIP fine and extract the files, but that doesn't help.
bussemac said:
I get "invalid ZIP file format" using TWRP 3.1.1-0 on an XT1575. Was running lineageOS 14.1 but I wiped system and data before trying to install the zip. On my laptop I can open the ZIP fine and extract the files, but that doesn't help.
Click to expand...
Click to collapse
See this thread :
https://forum.xda-developers.com/moto-x-style/general/guide-xt1575-update-to-nph25-200-22-t3680477
The OP will need to comment - he may be coming from a rooted stock ; at least according the the thread noted above - if you have installed a custom ROM ; there are other steps besides just trying to flash this
I have NOT tried the OP's method or the referenced thread - so I cannot really speak from experience ; just pointing out other resources that have additional information -
Will this work with XT1572? Just confirming.
This is not a traditional TWRP zip file. It is a backup file. You need to unzip it and put it in the backup directory. You then restore backup, choose the nph25-200-22. . . directory, and away you go!
stevejohnson42 said:
See this thread :
https://forum.xda-developers.com/moto-x-style/general/guide-xt1575-update-to-nph25-200-22-t3680477
The OP will need to comment - he may be coming from a rooted stock ; at least according the the thread noted above - if you have installed a custom ROM ; there are other steps besides just trying to flash this
I have NOT tried the OP's method or the referenced thread - so I cannot really speak from experience ; just pointing out other resources that have additional information -
Click to expand...
Click to collapse
kelru2000 said:
This is not a traditional TWRP zip file. It is a backup file. You need to unzip it and put it in the backup directory. You then restore backup, choose the nph25-200-22. . . directory, and away you go!
Click to expand...
Click to collapse
Ah, sure, OK, that makes sense, just wish that had been explained somewhere. I'll give that a shot tonight, thanks!
bussemac said:
Ah, sure, OK, that makes sense, just wish that had been explained somewhere. I'll give that a shot tonight, thanks!
Click to expand...
Click to collapse
Success? Some people have reported bootloops due to a firmware problem. I'd like to know how it went.
ptn107 said:
Success? Some people have reported bootloops due to a firmware problem. I'd like to know how it went.
Click to expand...
Click to collapse
Well it worked, sort of. It booted to stock but it wasn't stable and the play store kept crashing, I tried all the usual stuff for that, clear services & play store data, uninstall updates, finally tried a factory reset and now I'm stuck in TWRP bootloop, even if I reinstall this image.
So very much YMMV.
bussemac said:
Well it worked, sort of. It booted to stock but it wasn't stable and the play store kept crashing, I tried all the usual stuff for that, clear services & play store data, uninstall updates, finally tried a factory reset and now I'm stuck in TWRP bootloop, even if I reinstall this image.
So very much YMMV.
Click to expand...
Click to collapse
Thankfully the 7.0 stock firmware is available now. I wiped and clean flashed it and it works perfectly.
https://forum.xda-developers.com/moto-x-style/general/xt1575-moto-x-pure-edition-factory-t3704142
the link is dead
someone can help, sharing a new link? thank you
Today I flashed Pixel Experience GSI on my whyred after much trouble so here is a guide to make things clear.
if you are coming from MIUI you have to format data from twrp. this is a must to disable encryption.
after you are done formatting data. just do factory reset from twrp and then go to advanced wipe and then do the regular dalvik, cache, system, data and then swipe to wipe.
now the thing is whyred officially supports treble but the implementation is shoddy according to XDA folks. so if you flash GSI over miui's vendor there will be many bugs. like brightness slider not working and many things. so they(all credit goes to them) created a vendor zip which makes things really good. there are no bugs and it also supports volte. here is the download link .
https://www.androidfilehost.com/?w=files&flid=273660
now flash this zip file in twrp.
after that download the GSI of your choice from here.
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
remember to download arm64 A only system image.
here is pixel experience GSI which I prefer:
https://download.pixelexperience.org/treble_gsi/
now extract the zip and you will get a single .IMG file which is your system image. now go to twrp and then go to install then go to select install image downward. (don't flash directly, it's an .IMG file) then select the extracted .IMG file and then choose system and then flash.
then reboot system. that's it. you should boot fine.
download latest official twrp from here: https://dl.twrp.me/whyred
if you want root you will have to flash magisk beta 16.6 which works better on GSI. download here.
https://github.com/topjohnwu/Magisk/releases/download/v16.6/Magisk-v16.6.zip
to use Google camera you will have to enable camera2api. arnova's gcam doesn't work on this build. you will have to use BSG's gcam. here is the link. enable nexus style and active portrait mode from settings.
https://www.celsoazevedo.com/files/android/google-camera/f/MGC_5.2.022.apk
few tips: if your device is not booting and going to fastboot, flash magisk. it will definitely boot up.
if your device shows decryption failed, just format data from twrp. it will delete all user data btw.
no need to flash lazyflasher.
there are no uncertified device pop up from Google. so no need to worry.
playstore shows uncertified btw and magisk shows CTS false.
all the links that I have linked here, the credit goes to the creators. I am a normal user of XDA. thanks to them.
happy flashing and all hail the XDA lords.
How is Pixel experience gsi though?....faced any bugs till now?
it's good but there where few bugs. anyway pixel experience rom specifically for whyred has been released. you can flash that. it's great and bug free. download it here. it's not GSI though. normal ROM.
https://download.pixelexperience.org/whyred/
mr._.nobody said:
How is Pixel experience gsi though?....faced any bugs till now?
Click to expand...
Click to collapse
mr._.nobody said:
How is Pixel experience gsi though?....faced any bugs till now?
Click to expand...
Click to collapse
I was on the June build, I had issues with bluetooth audio (didn't work) and USB connection to computer (did not work). I think the USB issue was due to Magisk but I never did figure out the bluetooth issue.
No issues with the whyred version of Pixel Experience.
I also faced the same issue. But I see July build of GSI is up so those bugs might be fixed. anyway the PE ROM for whyred is excellent.
btw GSI will help us when P will release next month.
goofball2k said:
I was on the June build, I had issues with bluetooth audio (didn't work) and USB connection to computer (did not work). I think the USB issue was due to Magisk but I never did figure out the bluetooth issue.
No issues with the whyred version of Pixel Experience.
Click to expand...
Click to collapse
mearjunsha said:
I also faced the same issue. But I see July build of GSI is up so those bugs might be fixed. anyway the PE ROM for whyred is excellent.
btw GSI will help us when P will release next month.
Click to expand...
Click to collapse
So should I flash the ROM or the gsi?....are there any differences?
you should flash the ROM as it's specifically for whyred. its flashing instruction is different than GSI. but easy. just wipe and then flash the ROM. and reboot. that's it.
you may have to format data to disable encryption.
here is the forum discussion: https://forum.xda-developers.com/redmi-note-5-pro/development/rom-pixel-experience-t3816099
mr._.nobody said:
So should I flash the ROM or the gsi?....are there any differences?
Click to expand...
Click to collapse
Thanks mate for your experience, no detailed information in PE thread about wipes to do, before or after, can help with it? May be also with magisk release to install and best gcam to use?
remove all security like fingerprint, pattern etc.
go to twrp
go to wipe
do factory reset
go to advanced wipe
select dalvik, cache, system and data and then wipe
go to install
flash the pixel experience rom
reboot to system
that's it
if you get a prompt to enter password to start android then you will have to go back to twrp and go to wipe and format data and type yes. it will delete all your files btw. so backup everything. then reboot it will boot up fine.
after you have done booting and set up, go back to twrp and flash magisk v16. reboot to system. all done.
I have already given details of gcam in my OP. Kindly check that. The same works great on this ROM.
ask me if you face any problem. happy to help ?
trazalca said:
Thanks mate for your experience, no detailed information in PE thread about wipes to do, before or after, can help with it? May be also with magisk release to install and best gcam to use?
Click to expand...
Click to collapse
You are the man!!! 10 hours remaining for unlock bootloader, i'm ready and now, with your help, more confident... Thanks a lot!!
I understand your excitement but do check your build whether you are on Anti rollback. if you are on 9.5.19 you should absolutely not proceed right now.
read about it on XDA.
trazalca said:
You are the man!!! 10 hours remaining for unlock bootloader, i'm ready and now, with your help, more confident... Thanks a lot!!
Click to expand...
Click to collapse
I'm on global 9.5.6... never used phone and upgraded, i think that i can do it, i'm wrong?
you can go ahead. happy flashing! ?
trazalca said:
I'm on global 9.5.6... never used phone and upgraded, i think that i can do it, i'm wrong?
Click to expand...
Click to collapse
[dupe sorry]
You should by all means read about antirollback to be sure, but my understanding is that the antirollback refers to the firmware, not the rom. MIUI roms all include different firmware, so you can't rollback a MIUI rom (unless it's been modded to be firmwareless). But as far as I know, no custom roms include firmware, so you should be fine even if your firmware is ARB triggered if all you're doing is installing custom roms.
Hi, someone flashed latest Pie Phh GSI? I tried with PE CAF, AOSIP, and Mokee vendors but doesn't boot, always stuck at the Mi logo, even I flashed the permissiver patch without luck.
Is GSI better than respective Rom (say Havoc GSI as compared to Havoc OS rom)?
ShadowFax said:
Is GSI better than respective Rom (say Havoc GSI as compared to Havoc OS rom)?
Click to expand...
Click to collapse
Nope.
Hi guys
I was trying some of custom rom on my OP6 and I wanted to go back to Oxygen OS. So i did a clean installation with system wipe and i flashed the last full OTA update. But since i can't boot to system anymore, TWRP always displays that there is no OS installed despite the fact that I've tried several rom . Is this the first time it's done this to me how can I fix it?
raptax said:
Hi guys
I was trying some of custom rom on my OP6 and I wanted to go back to Oxygen OS. So i did a clean installation with system wipe and i flashed the last full OTA update. But since i can't boot to system anymore, TWRP always displays that there is no OS installed despite the fact that I've tried several rom . Is this the first time it's done this to me how can I fix it?
Click to expand...
Click to collapse
The best suggestion I can give you is to flash stock oos with TWRP, reboot to stock recovery, without flashing anything else, wipe data from stock recovery and startup system.. if it is working you can flash back TWRP and magisk if you need it
Just be careful because at your point is easy to lose all of your stored data
Hitman478™ said:
The best suggestion I can give you is to flash stock oos with TWRP, reboot to stock recovery, without flashing anything else, wipe data from stock recovery and startup system.. if it is working you can flash back TWRP and magisk if you need it
Just be careful because at your point is easy to lose all of your stored data
Click to expand...
Click to collapse
I tried your solution ..... and it worked thx man
I don't know why there was a problem with TWRP but the important thing is that my phone is alive again
raptax said:
I tried your solution ..... and it worked thx man
I don't know why there was a problem with TWRP but the important thing is that my phone is alive again
Click to expand...
Click to collapse
Exactly! I'm glad to had help you sometimes if something is done wrong TWRP is dangerous
raptax said:
I tried your solution ..... and it worked thx man
I don't know why there was a problem with TWRP but the important thing is that my phone is alive again
Click to expand...
Click to collapse
If you wipe system, then flash oos ROM, TWRP will think there is no os. You can just ignore and boot.
Wiping system then flashing any time will make twrp display "no os installed" it does this because it hasn't created files for twrp to check if you have a ton installed. Flashing twrp then rebooting to twrp fixes it.
Reboot to stock recovery?
Hitman478™ said:
The best suggestion I can give you is to flash stock oos with TWRP, reboot to stock recovery, without flashing anything else, wipe data from stock recovery and startup system.. if it is working you can flash back TWRP and magisk if you need it
Just be careful because at your point is easy to lose all of your stored data
Click to expand...
Click to collapse
Hi, need a little bit of support, since I'm new to this as well. I was in a working OOS open beta 25/28, but then I think I flashed the wrong zip (OOS 9.0.9?), and I was not able to boot to system. It kept going to "bootloader unlocked" screen and custom recovery. Currently in TWRP blu_spark 3.3.1-x v. 9.109, and it's showing me no OS installed when I attempt to reboot. I haven't rebooted to system yet.
All the folders in my /sdcard is gibberish... if I try to push a file to it, it says "Required key not available." I did remove all security/passwords from my phone before doing any updates/backups.
I completed a wipe cache/dalvik/system via TWRP, and flashed the OOS OTA stable Android 10 zip downloaded directly from OnePlus Support. Considering this situation, do you still think it's safe for me to reboot to system? Then how do I get to stock recovery from there--is that by holding down the buttons?
5xonlineage said:
Hi, need a little bit of support, since I'm new to this as well. I was in a working OOS open beta 25/28, but then I think I flashed the wrong zip (OOS 9.0.9?), and I was not able to boot to system. It kept going to "bootloader unlocked" screen and custom recovery. Currently in TWRP blu_spark 3.3.1-x v. 9.109, and it's showing me no OS installed when I attempt to reboot. I haven't rebooted to system yet.
All the folders in my /sdcard is gibberish... if I try to push a file to it, it says "Required key not available." I did remove all security/passwords from my phone before doing any updates/backups.
I completed a wipe cache/dalvik/system via TWRP, and flashed the OOS OTA stable Android 10 zip downloaded directly from OnePlus Support. Considering this situation, do you still think it's safe for me to reboot to system? Then how do I get to stock recovery from there--is that by holding down the buttons?
Click to expand...
Click to collapse
No, your internal storage Is like trash cause the last rom you flashed has older security patch than oos10. Your device Is now encrypted and wont boot to system. I Guess you have to erase all via MSN tool or fastboot signed rom. Even if you wiped what mentioned above, your problem still be the data.
Fastboot method?
°Washy said:
No, your internal storage Is like trash cause the last rom you flashed has older security patch than oos10. Your device Is now encrypted and wont boot to system. I Guess you have to erase all via MSN tool or fastboot signed rom. Even if you wiped what mentioned above, your problem still be the data.
Click to expand...
Click to collapse
Thank you for replying. I'm relieved that you know of a couple methods to try.
Is using "Format Data" in TWRP an option for dealing with the encryption??
For the MSN tool, can I use this one? Tried looking around, but it's unclear. "[TOOL] MsmDownloadTool V4.0 International (Oxygen OS 5.1.5)" https://forum.xda-developers.com/on...wnloadtool-v4-0-international-t3798892/page10
I would be more comfortable with using fastboot, but am I at any risk of having lost fastboot, or can I just turn off my device from TWRP right now and hold down the buttons to get there? Afraid to move out of TWRP right now, in case I can't get back. I do have twrp-3.3.1-18-enchilada-Q-mauronofrio.img that I can run from fastboot if needed.
By "signed rom," do you mean I can simply flash one of the zips here from fastboot? "[OnePlus 6][ROM][OTA][Oxygen OS] Mirrors for official Oxygen OS ROMs and OTA updates" https://forum.xda-developers.com/oneplus-6/how-to/oneplus-6-mirrors-official-oxygen-os-t3792244
Thanks again.
5xonlineage said:
Thank you for replying. I'm relieved that you know of a couple methods to try.
Is using "Format Data" in TWRP an option for dealing with the encryption??
For the MSN tool, can I use this one? Tried looking around, but it's unclear. "[TOOL] MsmDownloadTool V4.0 International (Oxygen OS 5.1.5)" https://forum.xda-developers.com/on...wnloadtool-v4-0-international-t3798892/page10
I would be more comfortable with using fastboot, but am I at any risk of having lost fastboot, or can I just turn off my device from TWRP right now and hold down the buttons to get there? Afraid to move out of TWRP right now, in case I can't get back. I do have twrp-3.3.1-18-enchilada-Q-mauronofrio.img that I can run from fastboot if needed.
By "signed rom," do you mean I can simply flash one of the zips here from fastboot? "[OnePlus 6][ROM][OTA][Oxygen OS] Mirrors for official Oxygen OS ROMs and OTA updates" https://forum.xda-developers.com/oneplus-6/how-to/oneplus-6-mirrors-official-oxygen-os-t3792244
Thanks again.
Click to expand...
Click to collapse
I hardbricked my device about 10 times and i was able to recovery It even from a blank screen. Btw format data Will erase all your data but also the internal storage. About fastboot dont be afraid, go under twrp reboot section and reboot to bootloader. Then go under xda op6 guide section and search for mirrors for fastboot rom guide by Mauronofrio. He pushed my ass out the **** a lot of time.
P.s. Sorry but I dunno how to paste a link via xda app. Yes, ik! It's a vert newbie thing.
5xonlineage said:
Thank you for replying. I'm relieved that you know of a couple methods to try.
Is using "Format Data" in TWRP an option for dealing with the encryption??
For the MSN tool, can I use this one? Tried looking around, but it's unclear. "[TOOL] MsmDownloadTool V4.0 International (Oxygen OS 5.1.5)" https://forum.xda-developers.com/on...wnloadtool-v4-0-international-t3798892/page10
I would be more comfortable with using fastboot, but am I at any risk of having lost fastboot, or can I just turn off my device from TWRP right now and hold down the buttons to get there? Afraid to move out of TWRP right now, in case I can't get back. I do have twrp-3.3.1-18-enchilada-Q-mauronofrio.img that I can run from fastboot if needed.
By "signed rom," do you mean I can simply flash one of the zips here from fastboot? "[OnePlus 6][ROM][OTA][Oxygen OS] Mirrors for official Oxygen OS ROMs and OTA updates" https://forum.xda-developers.com/oneplus-6/how-to/oneplus-6-mirrors-official-oxygen-os-t3792244
Thanks again.
Click to expand...
Click to collapse
Do you solve, man?
Fastboot ROM
°Washy said:
I hardbricked my device about 10 times and i was able to recovery It even from a blank screen. Btw format data Will erase all your data but also the internal storage. About fastboot dont be afraid, go under twrp reboot section and reboot to bootloader. Then go under xda op6 guide section and search for mirrors for fastboot rom guide by Mauronofrio. He pushed my ass out the **** a lot of time.
P.s. Sorry but I dunno how to paste a link via xda app. Yes, ik! It's a vert newbie thing.
Click to expand...
Click to collapse
That's awesome, I'm starting to grasp how much of a genius Mauronofrio is, after so many people referencing his work.
In his guide, he says, "These ROMs can't be used to update or downgrade your phone but just to restore your phone, so don't use them to come back to oreo or to update from oreo to pie." This may be a dumb question, but how do I know which zip/OOS version to flash, when I don't have a functioning OS on my phone?
5xonlineage said:
That's awesome, I'm starting to grasp how much of a genius Mauronofrio is, after so many people referencing his work.
In his guide, he says, "These ROMs can't be used to update or downgrade your phone but just to restore your phone, so don't use them to come back to oreo or to update from oreo to pie." This may be a dumb question, but how do I know which zip/OOS version to flash, when I don't have a functioning OS on my phone?
Click to expand...
Click to collapse
I talked with Mauronofrio in pm and he said me that you could solve your issue simply flash the ROM you want and format data after flash that one. Remember that your internal will be wiped but it would happen in any scenario we talked.
Magisk, boot img?
°Washy said:
I talked with Mauronofrio in pm and he said me that you could solve your issue simply flash the ROM you want and format data after flash that one. Remember that your internal will be wiped but it would happen in any scenario we talked.
Click to expand...
Click to collapse
That worked! And starstruck that you were able to check that with him. I flashed Mauronofrio's fastboot ROM for 10.3.2 and it rebooted (WOW). I clicked through the Google setup pages and checked that my data and wifi worked.
I then went back into fastboot, booted M's twrp img, fomatted data, and then installed twrp-3.3.1-x_blu_spark_v9.109_op6.zip, rebooted into recovery.
Then I think I made a mistake, because I installed Magisk-v20.4.zip. It succeeded, but now I can't boot into system anymore. Is it too late to flash the 10.3.2 boot.img?
5xonlineage said:
That worked! And starstruck that you were able to check that with him. I flashed Mauronofrio's fastboot ROM for 10.3.2 and it rebooted (WOW). I clicked through the Google setup pages and checked that my data and wifi worked.
I then went back into fastboot, booted M's twrp img, fomatted data, and then installed twrp-3.3.1-x_blu_spark_v9.109_op6.zip, rebooted into recovery.
Then I think I made a mistake, because I installed Magisk-v20.4.zip. It succeeded, but now I can't boot into system anymore. Is it too late to flash the 10.3.2 boot.img?
Click to expand...
Click to collapse
No. Just flash stock boot image if magisk broke something.
Rooted
°Washy said:
No. Just flash stock boot image if magisk broke something.
Click to expand...
Click to collapse
I ended up following the guide to Magisk Root without TWRP for OnePlus 6 Oxygen OS https://forum.xda-developers.com/oneplus-6/how-to/patched-boot-image-magisk-16-7-beta-t3818853 since it was referenced by Mauronofrio's post for having issues getting his TWRP to work with latest Magisk.
Someone posted a patched boot.img for 10.3.2, so now I'm rooted without TWRP. Priorities. Now all I need is for special characters and emojis to work Will keep an eye on other threads.
I'm learning a lot, thanks so much for all your help. You pointed me in the right direction when I was not sure what the hell to do!
5xonlineage said:
I ended up following the guide to Magisk Root without TWRP for OnePlus 6 Oxygen OS https://forum.xda-developers.com/oneplus-6/how-to/patched-boot-image-magisk-16-7-beta-t3818853 since it was referenced by Mauronofrio's post for having issues getting his TWRP to work with latest Magisk.
Someone posted a patched boot.img for 10.3.2, so now I'm rooted without TWRP. Priorities. Now all I need is for special characters and emojis to work Will keep an eye on other threads.
I'm learning a lot, thanks so much for all your help. You pointed me in the right direction when I was not sure what the hell to do!
Click to expand...
Click to collapse
I followed that thread for the first A10 release cause there wasn't a worked twrp yet. You are welcome man, when I feel myself usefull I always try to help.
Hi,
I recently installed kosp on my device and rooted my device. I tried to install twrp (without any success), but after multiple tries, it seems I broke something.
I can't update anything, it seems the a partition of my device is broken :
if I try to install the update, my phone boots on the a partition and jumps immediately to the bootloader (no recovery nor system).
I tried to hard brick retore my phone twice with no luck yet.
If you have any idea on how to fix this issue, it would be much appreciated.
If not, I'll try to hardbrick restore this device once more....
Thanks !
Please read the thread before posting:
Upgrading:
It is recommended to update using updater
Via recovery:
Reboot to recovery
Sideload with ADB (preferred)
Reboot to recovery
Reboot
Via updater app:
Open Settings -> System -> KOSP Updater
Download the ota if available or if you have already downloaded the zip then use it for local upgrade
Install the update
Flash magisk to inactive slot (optional)
(optional) Reboot to recovery if you have anything else to flash
Reboot
Just use MSMTool and do a clean/fresh install.
After that. Read the OP in KOSP thread how to update. And i think u cant use TWRP with KOSP.
spinoza23 said:
Please read the thread before posting:
Upgrading:
It is recommended to update using updater
Via recovery:
Reboot to recovery
Sideload with ADB (preferred)
Reboot to recovery
Reboot
Via updater app:
Open Settings -> System -> KOSP Updater
Download the ota if available or if you have already downloaded the zip then use it for local upgrade
Install the update
Flash magisk to inactive slot (optional)
(optional) Reboot to recovery if you have anything else to flash
Reboot
Click to expand...
Click to collapse
Thanks, tried that already, sorry if I wasn't clear, but that's not working.
Dan3ll1 said:
Just use MSMTool and do a clean/fresh install.
After that. Read the OP in KOSP thread how to update. And i think u cant use TWRP with KOSP.
Click to expand...
Click to collapse
That's what I'm trying to avoid if possible...
But why? This will take you 30-60 min and u have a fresh 7 Pro with KOSP on it.
Dan3ll1 said:
But why? This will take you 30-60 min and u have a fresh 7 Pro with KOSP on it.
Click to expand...
Click to collapse
Ok, so I ended up doing that, but I'm still facing the same issue : when the device tries to boot on the a partition, I'm just immediately sent to the bootloader and have to run "fastboot --set-active=b" to reboot into my system...
KK...Don´t know were the error is. I did install KOSP and ArrowOS both 2 times to test wich rom is the best for me.
I did not having any issue with the install on both of them.
But as spinoza23 said.
Do it like the OP post and you should not have any issue.
Maybe make a post in KOSP thread if u think it is a general Rom issue.
Have you tried flashing the recovery to both slots in fastboot screen? In your case, fastboot flash boot boot.img --slot all
Ensure you're using the kosp recovery boot.img. After that, cycle the volume key to recovery then factory reset. Then adb sideload the kosp zip
I use this method all the time and avoid using twrp. Then since you already did the effort of getting the boot img, just patch it. If you really want to use twrp, just use the fbev2 version to flash things like magisk or kernels. Just boot the twrp.img though not flash. I hope this helps. Currently on derp12. I was daily driving kosp12 for a while with the patched boot and using gpay with no issues.
If you can boot to bootloader than you should be fine. A reliable way of installing roms is using the payload dumper and flashing boot.img, dtbo.img, odm.img, system.img, vbmeta.img, and vendor.img.
Thanks, I tried what you propose, unfortunately, still the same result : can't boot to a partition, which means no update possible...
lost boy said:
Thanks, I tried what you propose, unfortunately, still the same result : can't boot to a partition, which means no update possible...
Click to expand...
Click to collapse
maybe use the msm tool take it down to 9 and ota back up to 11 if you havent tried already, just a thought
Solved :
What I had to do :
use msmtool to go back to android 9
update to android 10's latest official build through the updater
update to android 11's latest beta build using oxygenos updater
update to kosp 2.2 using the provided fastboot sequence
update to kosp 2.3 using kosp updater
Took me the afternoon but seems to be working fine now !
My guess is, the device was not ready for a jump from android 9/10 to 12 directly or something...
Thanks for the help
So yeah you actually never said that u are on A9 or A10 release. I mean it is in the KOSP thread that you need 11.0.4 or the lastest A11.
Do you know that there are "newer" MSMTool builds than A9? Makes things easy.
How to install Xiaomi.eu ROM for Xiaomi 12S Ultra
Steps to install xiaomi.eu ROM for first time from China ROM (All your data and files on internal storage will be deleted!)
- Unlock your bootloader by Mi Unlock tool https://en.miui.com/unlock/
- Download our ROM zip file STABLE
- Unpack downloaded zip file in the PC (WinRAR is recommended)
- Reboot your device to fastboot mode (press volume down + power)
- Connect to PC via original USB cable
- Run fastboot installation script as administrator from unpacked zip according your PC operating system
For Windows OS ./windows_fastboot_first_install_with_data_format.bat
For Linux ./linux_fastboot_first_install_with_data_format.sh
For MacOS ./macos_fastboot_first_install_with_data_format.sh
- After reboot it is done (first boot may take up to 15min)
Update guide on the video
Update via OTA:
Next updates will be downloaded via OTA and flashed in TWRP
Enjoy..
ingbrzy said:
How to install Xiaomi.eu ROM for Xiaomi 12S Ultra
Steps to install xiaomi.eu ROM for first time from China ROM (All your data and files on internal storage will be deleted!)
- Unlock your bootloader by Mi Unlock tool https://en.miui.com/unlock/
- Download our ROM zip file STABLE
- Unpack downloaded zip file in the PC (WinRAR is recommended)
- Reboot your device to fastboot mode (press volume down + power)
- Connect to PC via original USB cable
- Run fastboot installation script as administrator from unpacked zip according your PC operating system
For Windows OS ./windows_fastboot_first_install_with_data_format.bat
For Linux ./linux_fastboot_first_install_with_data_format.sh
For MacOS ./macos_fastboot_first_install_with_data_format.sh
- After reboot it is done (first boot may take up to 15min)
Update guide on the video
Update via OTA:
Next updates will be downloaded via OTA and flashed in TWRP
Enjoy..
Click to expand...
Click to collapse
I can't wait to start this! THANK YOU THANK YOU!
Okay so, I followed all your instructions, and the phone actually completed all installs completely fine.
However.............My phone automatically boots into TWRP now every time. Unsure if I should wipe out all and start over?
GodKingKnight said:
I can't wait to start this! THANK YOU THANK YOU!
Click to expand...
Click to collapse
I used TWRP to manually boot SLOT A and it kept going to TWRP, then I switched to slot B and I'm in a boot loop. Should I wipe and attempt reimage?
use windows_fastboot_first_install_with_data_format for first install from China ROM..
Okay, so stupid move on my part.
I had TWRP setup to patch all ROMs that are newly installed with Magisk. So it was booting into TWRP. I set all my TWRP settings back to default and it seems to be booting now.
Excellent new. I don't have this phone yet but would absolutely love feedback for this ROM?
If users could kindly share their feedback that would be amazing.
Battery life?
Camera improvements?
Software bug fixes?
Does Google drive backup/restore work?
How would one do software updates if running the EU ROM? Will they come OTA? Or does it have to be manual installation?
Any improvements/changes please mention , thank you !
Awesome work @Xiaomi.EU Team!!! .... quick and easy installation, ROM is flawless & Works perfectly.
Update via OTA:
Next updates will be downloaded via OTA and flashed in TWRP
Click to expand...
Click to collapse
Is it valid for S12 Ultra too or is it a copy/paste of the Mi 11 Ultra post ?
evenshop said:
Is it valid for S12 Ultra too or is it a copy/paste of the Mi 11 Ultra post ?
Click to expand...
Click to collapse
valid of course..
I just installed EU ROM and wanted to give some first feedbacks..
Generally.. Excellent ROM. Pretty much everything works smoothly and so far no problems found.
No problems with banking apps, safetynet OK, Twpr already installed and working.
NFC, Bluetooth, WiFi, Network.. Everything works properly.
OK with Google Maps, Google Pay (I don't use it but opened the app and seem to work OK).
No delay with notifications.
I still have to try Google Auto, but I see that the App is already installed as system app (I will give feedback when I have tried).
The only problem so far is with Revolut App (not able to upload selfie on authentication) but this was so already on CN version and is probably a problem on App side. Would be interesting to find a workaround.
Excellent work by this great people!! Well done!
PS: I decided not to root so far my device
ingbrzy said:
valid of course..
Click to expand...
Click to collapse
Bravo sir. Excellent work on this flawless ROM. Couldn't be happier. Can't wait for the OTA supported TWRP version.
GodKingKnight said:
Bravo sir. Excellent work on this flawless ROM. Couldn't be happier. Can't wait for the OTA supported TWRP version.
Click to expand...
Click to collapse
P.S. Will this require another wipe and reinstall, or could we retain data when upgrading?
GodKingKnight said:
P.S. Will this require another wipe and reinstall, or could we retain data when upgrading?
Click to expand...
Click to collapse
it will be just an update.. no data wiped..
oh man !!!
Bootloader unlock requested
ingbrzy said:
如何为小米 12S Ultra 安装 Xiaomi.eu ROM
首次从中国ROM安装xiaomi.eu ROM的步骤（您在内部存储中的所有数据和文件都将被删除！）
- 通过小米解锁工具https://en.miui.com/unlock/解锁你的引导程序
- 下载我们的 ROM zip 文件 STABLE
- 在 PC 中解压下载的 zip 文件（推荐使用 WinRAR）
- 将您的设备重新启动到快速启动模式（按降低音量+电源）
- 通过原装USB 数据线连接到 PC
-根据您的 PC 操作系统从解压的 zip以管理员身份运行 fastboot 安装脚本
对于 Windows 操作系统./windows_fastboot_first_install_with_data_format.bat
对于 Linux ./linux_fastboot_first_install_with_data_format.sh
对于 MacOS ./macos_fastboot_first_install_with_data_format.sh
- 重启后完成（第一次启动可能需要 15 分钟）
视频更新指南
[媒体=youtube]A_GQqIEp64g[/MEDIA]
通过 OTA 更新：
下一个更新将通过 OTA 下载并在 TWRP 中刷新
享受..
Click to expand...
Click to collapse
Hi,it's this rom? xiaomi.eu_multi_THOR_V13.0.8.0.SLACNXM_v13-12-fastboot.zip thank you!
BH1HHO said:
Hi,it's this rom? xiaomi.eu_multi_THOR_V13.0.8.0.SLACNXM_v13-12-fastboot.zip thank you!
Click to expand...
Click to collapse
yes
This just made this phone near perfect ! Kudos
Sir may I ask you a question please ?
I constantly switching phones. Ones a year I coming back to Xiaomi because they will always make something good.
I noticed that YouTube app year later on Miui 13 still have a glitch with 120Hz....however YouTube Vanced is working perfectly ! What's the actual reason of this glitch ?
Best Regards