Hi Guys,
(paid job)
Looking for an expert, who can make a custom ROM for Samsung s10e.
Custom ROM specification
SAMSUNG S10e + CP2101 USB to UART bridge controller
Android 9 or 10.
Features what we need:
Custom boot animation (our branding)
Support Samsung interaction control app, in order to prevent touch on the screen (but if you have another solution, that is fine)
NFC support (our apk-s using NFC, they start using NFC cards)
Disable the "Allow the app APPNAME to access the USB device?” system message, when starting up our applications. (CP2101 USB to UART bridge controller support)
Wireless charging
After boot, our developed apks needs to be run. (5 of them)
These are VR apps, made with Unitiy3d. The mobiles are inside a custom made VR headset, no reach for the buttons etc.
Don’t need any else program running.
let me know if anybody can help us.
thx.
Related
Hi there
I'm embarking on an ambitious project and i was wondering if anyone could help me by giving suggestions.
I am making my own home automation system, and I already have the necessary hardware to get it up and running, but I want to take it a step farther.
I have this (Use google translate lol) http://cba.sakura.ne.jp/kit01/kit_399.htm kit, which is basically a set of 8 relay switches that can be used to turn on and off mains devices (such as lights, powerpoints, ect) that are controlled by a computer through a DB25 printer port. I also have an old Dell D600 laptop that has said printer port, and the software needed to drive the circuit board. This is all well and good, as everything is working so far, but before I bother to install this thing in my roof and hook it up to control my lights, power points, ect, I was wondering if there is a way to use my android phone (HTC Legend, unrooted ) or tablet (Motorola xoom wifi rooted with Tiamat, o/c to 1.7ghz) to control this board through a computer.
I already have a client that remote controls the computer (splashtop remote), and I can achieve this with some difficulty by remote controlling the computer and using the PC software through my phone/tablet, but I was wondering if there is an android home automation program and its PC client service that supports DB25 printer port pinout settings, so I could directly control the circuit board through the app, like the leading home automation apps already available (minus the extremely expensive proprietary hardware that you need with them). If not, has anyone else considered developing one? If anyone could give me any help on this it would be greatly appreciated.
Around last June, my family has gotten a TV box set only providing Chinese content, but boy have I had a hard time with this device! Although there is an app store for that box, there aren't that many apps that I can download aside for a few games and other productivity apps. From whatever technical information I could get, here's what I got:
Android version: 4.4.2 KitKat
Model: S8G40
RAM: ? 1GB
Internal Storage: ? 8GB
Connectivity: HDMI (the main output), microSD card slot, USB 3.0, 3.5mm audio-video plug, Ethernet
Input: Remote control (the menu key is seldom used with the custom software), USB devices
CPU: possibly ARMv7
Power source: 12V DC, 1A
While trying to install the select apps, I did get the popup for local APK installation, which tells me that "allow unknown sources" is turned on. There is also neither the Play Store nor other Google programs installed onto that box by default. The built-in app store did tell me the following:
ADB: closed
Root: closed
Without the stock settings app, ADB can't be turned on from the device.
Some popup dialogs I got indicated the set box software is based on AOSP, but none of that was helpful to me.
Moreover, I tried some USB hardware with it, and they work. A USB mouse puts a cursor on a screen, but isn't useful with most of the custom software except the AOSP parts I occasionally saw. A USB keyboard with extra shortcuts worked, with the following buttons working:
Home -> home screen
Volume buttons, including mute
Suspend key -> puts the device to sleep; when powered on again, the full boot cycle is performed
Music -> opens the stock music app, displaying no files even with external storage connected, and the only non-custom app I successfully opened up.
Screenshot keys work; I get a screenshot taken, but it is then impossible to view or delete the screenshot afterwards as they could be stored on the non-accessible internal storage.
USB storage is mounted, and a custom file manager limited to photos, music, and video can be used to access one. This file manager proved useless to me in trying to get outside APKs installed.
USB hubs can attach more than one of these or the following at once to the set box.
I even took the set box apart once, and got to see its hardware (specific hardware can't be listed as there's no way to get an app on there to tell me that info. There seemed to be no hardware button for resetting the device nor a recovery mode. [if needed, I can send images of the hardware]
All in all, that set box IMO is really secure, with JTAG hardware possibly being the only way I can achieve customization and more outside of the intended activities (the set box could also be leased hardware, of which then my family won't own the set box, possibly turning modifications to the set box into forbidden activities). My situation is an obscure one; the company providing the set box is probably not well-known, and that hurts my chances of being able to obtain the ability to customize the device. If nobody can help, I'll simply stay away from such software-limited hardware next time.
Hi,
Thanks for using XDA Assist Kindly post here Android Q&A, Help & Troubleshooting
Good Luck!
Hey there!
As many of you may have heard or even tried, there is a functional "Desktop Mode" built into Android 10 (as long as the phone vendor didn't deactivate this). This mode will, when manually activated in the developers options, act like an Desktop OS when connecting your phone to an external screen. (or without activating anything in case of e.g. Samsung DeX)
I'd like to use this Thread to gather some information about the implementations of "Desktop Mode" into the phones of different vendors, and hope you can support me with testing it out on your phones.
Things of interest are (IMHO, to be continued):
is the desktop mode working (and usable)
does the dpi setup change in the moment of connecting an external screen (or does everything look just awful big)?
(yes, I know there are apps/tools to change that)
which maximum resolution is possible?
how many screens are possible? (usually just one, ...but who knows)
do you just need an USB-C to HDMI/DP cable or a (special) docking station for connecting a screen? (if using a cable, Miracast/wireless is another option of course)
does the handset get a special 'role'/feature in desktop mode? (like Samsung devices becoming a trackpad)
are there any usage improvements implementated, e.g. like file drag'n'drop or dragging windows to the display sides to maximize them on half the screen (like in windows)
what's the connection speed of the USB-C port? (USB 2.0, USB 3.2 G1 (5 Gbps), USB 3.2 G2 (10 Gbps) or even faster!?)
is it possible to use USB mouse/keyboard or just Bluetooth, and how's the speed? (eg. does BT lag a lot?)
At the moment it seems like Samsung has the best implementation of this feature with their "DeX Mode", but i'd like to know about those things from other vendors also.
My dream is to be able to ditch my notebook/tablet/8in tab/subnotebook collection an use just one device in future. (everything else needed for 'bigger' or x86 tasks can be done on cloud instances already)
But for that purpose there needs to be more than just 'basic' OS UI without any useful features
Hope we can start a good collection here and answer also your questions regarding this topic(s).
Thank you, regards
Schwarzer Riese
Can Android 10's Desktop mode be used with a DisplayLink adapter?
More precisely:
I've read the following post about Taskbar 6:
Taskbar 6.0 enables a Samsung DeX-like desktop mode experience on some Android 10+ devices
Taskbar by farmerbb can now enable a Samsung DeX-like desktop mode experience on any Android 10+ device with support for display output.
www.xda-developers.com
And I have an LG G6 H870 (without MHL). If I were to install a custom rom based on A10: Would it be possible to use Taskbar 6? Does Taskbar 6 run with a DisplayLink enabled adapter or it's MHL only? <I was searching for something like this but everyone just uses MHL.>
Thank you for your help!
Just replying to let you know you're not the only one searching for it.
I have a Mi10 Ultra which is more than capable of running the desktop environment if it weren't for the poor choice to implement USB-C 2.0 on this device (and AFAIK current upcoming devices of Xiaomi).
I've been crawling websites for a while now to figure out if it's possible (root drivers?) to get android desktop to show up on the monitor using displaylink rather than mirroring my screen.
It's good to know that someone else is thinking about the same
Thankfully the G6 has a USB 3.0 port so transfer speeds shouldn't be a problem. In fact: DisplayLink works perfectly for mirroring my phone's display.
I would have tried it myself if I would be able to install any custom rom... I tried it once but the encryption screwed me over and I had to reinstall a factory image.
(When I formated userdata (to remove encryption) then I tried to reboot into my original OS to see if everything is still all right, but I wasn't able to. Upon bootup I had only the option to "factory reset" my device. This option lead me back to the TWRP recovery. At this point I couldn't do anything because the option "wipe data/factory reset" didn't change my situation, and my G6 always booted into recovery mode. I know this is another topic but everyone else succeded with their custom rom installion... Also: I owned a G3, and had multiple roms on it without issues.)
Also: Would it yield more information if I were to ask DisplayLink Presenter's (the app's) developers about Android's Desktop mode?
I remember back in 2011 when I was working at Toshiba in Cyprus that they had a 10 inch Android laptop (no touchscreen), those type of devices seem to have been discontinued. On the same note, I wanted to convert my 2016 Sony Xperia Z5 compact smartphone into a desktop instead of throwing it away after it got dead zone on the touchscreen that keeps on getting worse and makes the device almost useless (The lighter piezo solution did not work for my device).
The 1st method is from videos that are available on Youtube that are not tested by me. The 2nd method is my own way that I tested on two devices. One is Running Android Lollipop 5 and one running Oreo 8. Each one has a different solution because the floating of any app option only works on Android Nougat 7 or above.
Method 1:
The below videos explain about benefit of using the dock. It requires purchasing a Dock and might only work with USB-C devices. There are many more videos available for this subject. The dock will also charge the device while in use. Tips from the 2nd method may improve some features for this method. I did not fully research this method as it can easily be researched by anyone because it is a readymade solution. You can research it further if it interests you to find out if your device will work well with this solution.
Videos on the dock solution
Method 2:
Not tested for gaming
The two devices that I tested this solution on are Sony Xperia Z1 Compact smartphone 2014 model running Android Lollipop and Sony Xperia Z5 Compact smartphone 2016 running Android Oreo Custom ROM. Both devices have been rooted for maximum features. Both devices use micro USB connection so it might work differently with charging for USB-C devices. Results may differ with different devices and different versions of Android but I believe that it will work very similarly to mine.
Flagship devices should work well and should be able to support all the below requirements for this method.
Holder
To have the camera for video chatting or close to the face then you will need a phone / tablet holder like in one of the below links.
https://www.amazon.co.uk/Gritin-Phone-Stand-Adjustable-Holder/dp/B07C3MQYQV
or
https://www.amazon.com/Phone-Holder-Gooseneck-Stand-Recording/dp/B07JM5435F
External Screen
To display the Android device onto an external screen then you will either need a screen that supports screen mirroring or a Miracast device. Miracast include Chrome cast and any other screen mirroring dongles. I tested the method with Anycast version 1 and a Chromecast knock off one, it worked well on both of them. If you get the Error HDCP then it can be solved with an internet search and a rooted device. These devices come with two modes and only one of them will work with your Android device. Mircast uses HDMI and will send the image and the sound to the connected external screen wirelessly. (Compatible with any screen that supports HDMI connection, make sure that your device has screen casting support before purchasing).
If your device does not support screen mirroring, then you will need to purchase an original Chromecast device and connect it to the screen and install Google Home on your device and configure Google Home to detect the Chromecast device to use it. Chromecast will need to be configured in network mode and both devices need to be connected to the same LAN network. (It is possible that not all Android O/S systems can support this function).
Example on connecting VIA Google Home to Chromecast video:
Google Home might also be able to cast to other supported devices. Check the internet for more information on that if needed.
Keyboard and Mouse
For this you will need an OTG cable (OTG cable converts USB to micro USB or to USB-C connection) with a standard USB hub as well as the keyboard and mouse. Or you can also get the OTG hub that is a combo between the OTG cable and the USB hub. USB Wired or wireless keyboard and mouse should work normally.
On some devices the USB mouse and key board need to be connected before the device is turned on. USB mouse and keyboard can also work in TWRP recovery.
It should also be possible to just get the OTG cable with only the wireless keyboard and mouse that need only one USB receiver connection.
If there are issues for the device to detect the Mouse & keyboard then connect them before turning on the device.
On most devices the on screen keyboard will automatically stop appearing while the USB keyboard is attached. This can be controlled from the phone settings options.
If there are issues using the external keyboard then of the apps from the below links should resolve your issue as they are made for the external keyboard.
Null Input Method - Apps on Google Play
Get rid of the soft keyboard when using your bluetooth or USB keyboard.
play.google.com
External Keyboard Helper Pro - Apps on Google Play
Take full control over your external Bluetooth or USB keyboard.
play.google.com
External Keyboard Helper Demo - Apps on Google Play
Take full control over your external Bluetooth or USB keyboard.
play.google.com
USB Storage
I tested this with USB flash drive and external USB drive and worked well with both. It is possible that not all the USB flash drives will work with the Android device. Sandisk did not work well on my devices but other models worked normally.
For USB flash drive. Connecting USB devices one by one might not work well enough. It sometimes will not work unless I connect all the devices to the USB hub and then connect it to the Android device while the device is on.
Connecting the USB external drive might need extra power. So plug the 2nd connection that comes with the external drive into either a USB device charger or a power bank. I recommend using this in all situations to avoid causing damage to the Android device. Connect the drive after the device has already loaded the O/S (The reason is explained under charging section below).
The apps in the below link are the best free app for browsing External USB devices. The app in the 1st link did not detect USB on Lollipop but it worked well on the newer Android O/S and the one in the 2nd link did not open on Oreo. So test both until satisfied. If you get the message that the drive is empty and needs formatting just ignore it and try the below apps.
https://play.google.com/store/apps/details?id=com.mobisystems.fileman&hl=en
http://www.estrongs.com/
Charging: It is not possible to charge and use the USB devices at the same time even if all are still connected (might not apply to USB-C Android devices, I don’t have one to test that on.) Connect the External USB drive that is using external power after the device is already on because it might start charging the device when the power is connected and if that happens then it will ignore the connected USB devices. It is an either or situation. Some devices have a 2nd way to charge the device, like a 2nd USB port or Qi charging (wireless charging). I was able to keep the Z1 compact charged with the 2nd option that it has.
Alternative all wireless connections
Android devices can handle 2-5 Bluetooth Devices simultaneously.
So it it possible to connect Bluetooth keyboard and mouse. Bluetooth or Wireless storage device. This will allow to keep the phone charged while it is using all the external devices.
Printing
To be able to print from your phone then you will need to use the below option
The below video will show how to print from specific printers:
Print photos from Google photos App:
Google Photos - Apps on Google Play
The home for your memories. Relive, share, and organize your photos.
play.google.com
Create and print Documents from WPS App:
WPS Office-PDF,Word,Excel,PPT - Apps on Google Play
PDF, Word, Excel, PowerPoint, Form & Notes, powerful as Microsoft Office.
play.google.com
Apps for desktop mode
There are many available in the play store but I found the below to be the best amongst them.
SecondScreen - better screen mirroring for Android
SecondScreen App from the below link needs either a rooted device or an ADB command. The ADB command will appear after installing the app and loading the profile. Multiple profiles can be created with this app. This app has several features. Some of the features include changing the resolution and density of the screen as well as reducing screen backlight. The lower the density the higher resolution will be which is to fit more things on the screen. The device might do a soft reboot when loading and unloading the profile.
https://play.google.com/store/apps/details?id=com.farmerbb.secondscreen.free&hl=en
Taskbar
The below app is only useful on Android Nougat 7 and above because it has a feature that is called freeform that allows to float any app when it is launched from this app for multitasking. It is made by the same developers that created Secondscreen and has a feature in the Secondscreen app to auto launch when the profile is loaded.
Set this app as default launcher. It does not have an option to minimize the apps to taskbar. To restore apps to freeform after being maximized then go to recent apps and click on the 1st icon on the left.
https://play.google.com/store/apps/details?id=com.farmerbb.taskbar&hl=en
For Lollipop 5 & Marshmallow 6 devices. Use the app in the below link It works on newer Android devices as well. It will creates a landscape desktop with a taskbar and launcher. It comes with its own set of apps and more apps can be added from the 2nd link which contain the additional apps. Only the apps that are provided with this program can float and to open multiple apps on the desktop at the same time.
This app will lock the screen in Landscape mode. To get out of this mode you will have to turn off the features that are turned on during the setup process. You might also need to force stop the app. That can be done from settings or by installing a specific app for that like the one in the below link.
KillApps : Close all apps running
KillApps - Close all apps - Apps on Google Play
Close all apps running in background
play.google.com
Sentio Desktop
https://play.google.com/store/apps/details?id=com.andromium.os
Sentio Apps (Lollipop, Marshmallow)
https://play.google.com/store/apps/details?id=com.sentio.apps
The below link is from the same developer and made for newer Android devices to float any app for Nougat 7 or above but it did not work for me so you can try it if you want to.
Sentio Desktop
https://play.google.com/store/apps/details?id=com.sentio.desktop
Hanna Baggili (John)
Hey. I've been working on the same goals for years now. I see you used Sentio desktop app for the desktop experience. However, Sentio seems to have gone under. Their app store entry is gone, and their website doesn't function.
What would be your best alternatives for a desktop environment setup, SW & HW? If I want a large display, I prefer to Miracast to a compatible device.
It's 2022. What would be your setup now. FWIW, I use and *older* LG V20 running Android 8, which is almost perfect for me (albeit not 'waterproof'). I have desire to upgrade to newer phones, with much more invasive versions of Android, tracking everyone and everything. Plus, screen casting (Miracast) isn't crippled as it now is in newer versions of Android.
Your choices?
I did not use all the apps for my setup that are in the guide. The provided solution is a general solution that I tested and works well.
Any app that is no longer in the Google play store can still be found online, in other non-official app store.
I did not test the solution for the later versions of Android.
From my own experience I found that the best Android version for the Android Desktop PC is Android 7.
What version of Android did you try your solutions on?
You can always check if there is a docking station for the phone that you want to use as a desktop. Take a look at YouTube videos in regards to that and consider it for your setup.
I did the conversion because I am an IT guy and lost the use of my phone. So I then converted it to a desktop and for the fun of it. I tested it on the older model that I have.