Hello Guys
I am new here and I have a allwinner a13 tab
Android 4.0.4
1.2 Ghz Single Core Cortex A8
Baseband V 1.5
Kernel armv7I
512 mb ram
4gb rom
Board Nuclear_evb
GPU Mali 400
GPU ARM
Hardware sun5i
kernel version 3.0.8+
7 inch screen
I want a custom kitkat rom for my device.
Searched all XDA threads found none useful
I want to develop own rom 4.4 for my device. I am a noob so please bear with me
I will be highly obliged if someone would make it for me
But just want some guidance to develop custom rom.
Please can just someone tell me how to develop rom for my device.
My device is Intex I Buddy 3 and is rooted. I have knowledge about rooting ,firmwares , kernels etc.
Can someone tell me that rom can be developed?
If yes then guide me the steps to do so as I am a quick learner I won't cause much trouble :laugh:
If no then why rom can not be developed.
So please help me
Thanks in advance.
Note: Please don't ignore this thread as I really need a kitkat rom for my device as it is completely screwed up . I dont have enough funds so that I can buy a new device
Still no help found
Tech N You said:
Hello Guys
I am new here and I have a allwinner a13 tab
Android 4.0.4
1.2 Ghz Single Core Cortex A8
Baseband V 1.5
Kernel armv7I
512 mb ram
4gb rom
Board Nuclear_evb
GPU Mali 400
GPU ARM
Hardware sun5i
kernel version 3.0.8+
7 inch screen
I want a custom kitkat rom for my device.
Searched all XDA threads found none useful
I want to develop own rom 4.4 for my device. I am a noob so please bear with me
I will be highly obliged if someone would make it for me
But just want some guidance to develop custom rom.
Please can just someone tell me how to develop rom for my device.
My device is Intex I Buddy 3 and is rooted. I have knowledge about rooting ,firmwares , kernels etc.
Can someone tell me that rom can be developed?
If yes then guide me the steps to do so as I am a quick learner I won't cause much trouble :laugh:
If no then why rom can not be developed.
So please help me
Thanks in advance.
Note: Please don't ignore this thread as I really need a kitkat rom for my device as it is completely screwed up . I dont have enough funds so that I can buy a new device
Click to expand...
Click to collapse
I have been wanting this as well but so far I have yet to see someone port or try to port a ROM for the A13 using the KitKat rom. I have many A13 tabs and I have some custom ROMs I created myself but none entail the makes of the KitKat ROM. To be honest I am not even sure it can be done other then a stock ROM modified to replicate the KitKat ROM meaning it is per say JellyBean 4.2 but the prop is edited to say KitKat and the theme to look like KitKat the added features etc.
orbitA13 said:
I have been wanting this as well but so far I have yet to see someone port or try to port a ROM for the A13 using the KitKat rom. I have many A13 tabs and I have some custom ROMs I created myself but none entail the makes of the KitKat ROM. To be honest I am not even sure it can be done other then a stock ROM modified to replicate the KitKat ROM meaning it is per say JellyBean 4.2 but the prop is edited to say KitKat and the theme to look like KitKat the added features etc.
Click to expand...
Click to collapse
I also want to run KitKat as you. Can you guide me how to modify stock rom in order to flash kitkat boot img and run kitkat or anything else that can create a cutsom rom.?
Tech N You said:
I also want to run KitKat as you. Can you guide me how to modify stock rom in order to flash kitkat boot img and run kitkat or anything else that can create a cutsom rom.?
Click to expand...
Click to collapse
Light MODing like editing build.prop start up sound and things like that is easy you can even change your start up/splash images and even APK's adding and removing with simple tools you can find on the net just do a search for how to edit your stock ROM or any ROM for that matter even here you might find all the tools you need.
I create all my ROMs using Ubuntu 12.04.3 desktop AMD64 and Source for JB 4.2.2 or a donor ROM which is similar to the stock ROM of the device the user may own. As for explaining step by step I am sorry but you will need to do the leg work for that as it is not easy to explain and you will need a general knowledge of what you are doing and at some points advanced knowledge. As for flashing the boot.img from KitKat to JB 4.2.2 will not work.Things that would/could be added if compatible to your donor ROM are Drivers, Sounds, Images, APKs, System Apps, Etc...
So the point is here that you can add images and splash screen and boot up images that come from KitKat and even add the apps if compatible with JB 4.2.2 and tweaks of your own that are made to boot with the system or not anything else would need to be ported and as mentioned I have yet to see a ported KitKat version for the A13. You can also edit your SystemUi.apk to make changes but this is another avenue make sure you understand and know what you are doing when doing so and always make backups!
Some Tools
=========
System Type is up to you!
ADB Tools is a (MUST)
DragonFace
LiveSuite
APK Tool
Bootimage Tools
slidepad704ce-jb-kitchen
Script-Bin Tools
Uberizer
This is just some of the things you can use some are for Windows other I use on Ubuntu.
orbitA13 said:
Light MODing like editing build.prop start up sound and things like that is easy you can even change your start up/splash images and even APK's adding and removing with simple tools you can find on the net just do a search for how to edit your stock ROM or any ROM for that matter even here you might find all the tools you need.
I create all my ROMs using Ubuntu 12.04.3 desktop AMD64 and Source for JB 4.2.2 or a donor ROM which is similar to the stock ROM of the device the user may own. As for explaining step by step I am sorry but you will need to do the leg work for that as it is not easy to explain and you will need a general knowledge of what you are doing and at some points advanced knowledge. As for flashing the boot.img from KitKat to JB 4.2.2 will not work.Things that would/could be added if compatible to your donor ROM are Drivers, Sounds, Images, APKs, System Apps, Etc...
So the point is here that you can add images and splash screen and boot up images that come from KitKat and even add the apps if compatible with JB 4.2.2 and tweaks of your own that are made to boot with the system or not anything else would need to be ported and as mentioned I have yet to see a ported KitKat version for the A13. You can also edit your SystemUi.apk to make changes but this is another avenue make sure you understand and know what you are doing when doing so and always make backups!
Some Tools
=========
System Type is up to you!
ADB Tools is a (MUST)
DragonFace
LiveSuite
APK Tool
Bootimage Tools
slidepad704ce-jb-kitchen
Script-Bin Tools
Uberizer
This is just some of the things you can use some are for Windows other I use on Ubuntu.
Click to expand...
Click to collapse
Ohk! Thank you:laugh::good:
Here is version for allwinner a10(this is allwinner a13+HDMI):
4pda.ru/ forum/index.php?showtopic=425228&st=2380#entry30353733
sorry for non working link but i cant add working (restrication)
Starting development : Between November and December.
When it will be released? : Q3 2018
This thread will be used only to report all the issues and success that i encounter in porting Miui 8 for our device.
Spamming the thread = comments removed
Spamming about release of Miui 8 or to do this and that = Cancelled.
All i need is people who know about coding, patience and support.
When the rom will be done, and if you want to share to other communities, please share only the post. Mirrors will result in rom being restricted (aka mirror link removed)
Thank you for understanding.
Quick note : The rom will be build from scratch. That's why it will take a long time .
Johnny TDN said:
Quick note : The rom will be build from scratch. That's why it will take a long time .
Click to expand...
Click to collapse
Based on MM or Nougat?
& will our current kernal lvl will be enough (3.x.101) to boot it up?
Ribin Manuel said:
Based on MM or Nougat?
& will our current kernal lvl will be enough (3.x.101) to boot it up?
Click to expand...
Click to collapse
Marshmallow
And i think yes. Right now i am not working on it.
Anybody who wants to help me with coding the kernel?
I get no support.
Then miui port is gone.
I would like some people who knows how to code kernel stuff so we can boost the release date of the rom
Miui 8 has been cancelled due to :
1. The coding kernel is very hard to be done.
2.Lack of interest and support from the community.
Leaving s2 plus community. Sorry fellas.
Thread closed at OP's request
I am on a Asus trio tx201la INTEL x86 tablet on android 4.2 on the tablet part. I researched that The zenfone 5, dell venue 7 and the samsung galaxy tab 3 10.1. All have the same intel atom z2560 cpu soc and some are running Android 7 & even 8 now.
The Galaxy tab 3, zenphone 5 got a lot more attention and thus a lot more custom rom attention. Dell venue and my Trio got little to no attention due to poorer sales.
The galaxy tab 3 has been updated to 7.1.1 see:
http://techbeasts.com/install-android-711-nougat-galaxy-tab-3-101-lineageos-141/
Now How can that help the Trio? I found this tool, but no flash.xml so no luck using it:
https://01.org/android-ia/downloads/intel-platform-flash-tool-lite
Here is a guide on how to use it: http://www.aryk.tech/2016/04/how-to-flash-stock-firmware-using-intel.html?m=0
This is all NEW as of 2017. So its not been available before this.
The TX201LAF a french tablet version of the TX201LA is in the same boat but it at least it is on 4.4. Its kernel firmware is here: http://support.asus.com.cn/Download.aspx?SLanguage=en&m=TX201LAF&p=3&s=587
My big question is with all these roms for x86 atom z2560 & z2580 soc's shouldn't I be able to get an updated rom somehow? I imagine that would involve building a rom myself but if the base soc is the same isnt it possible to build the rom for a different device and use a different kernel source like I linked above? The kernel source has the drivers I need right, for the device to run? Ive heard a lot of people talk about you wont get the touch panel to work or the wifi. I understand that but isnt it all loaded from the kernel source? So basically if I have kernel source and grab an updated rom from lineage 7 for the galaxy tab 10.1 and replace the kernal i'm good to go right? I know there is more to it but really looking for some help here?
Even if I can just get the tx201laf image to load on my tx201la that would be
something, its an update from 4.2 to 4.4. Both devices are identical, so that should make it a lot easier right? Looking for any insight to xda experts can provide.
Hi ! I'm still using my trio so I'm very interested ! Did you succeed ?
Thks a lot
no luck yet
I had hopes that this would turn out to work but you cant use the intel flash tool without a flash.xml which is written for the device. SO that stopped me dead in my tracks.
I recently found this: https://forum.xda-developers.com/android/software-hacking/efidroid-t3447466/page37
Hoping this dev will give the tx201la a shot. There is also this: https://forum.xda-developers.com/an...g/tool-multirom-recovery-replacement-t3102395
Do you realize how simular the tx201la is to just about every zenphone made since the newest. IE almost all of those roms would likely boot on our tablet.
??
Any other input?
Come on guys, has everyone moved on to the shinny new toys?
madhits45 said:
Common guys, has everyone moved on to the shinny new toys?
Click to expand...
Click to collapse
Best bet https://forum.xda-developers.com/bliss-roms/bliss-roms-development/x86-bliss-x86-pc-s-t3534657
Palm Trees said:
Best bet https://forum.xda-developers.com/bliss-roms/bliss-roms-development/x86-bliss-x86-pc-s-t3534657
Click to expand...
Click to collapse
Thanks for the tip. Now I need to find help up-streaming my kernel:
Device info: https://valid.x86.fr/a/wkb2d8
Kernel source: http://support.asus.com.cn/Download.aspx?SLanguage=en&m=TX201LA&p=3&s=587
Could really use help doing that.. Total noob & trying to understand all the terminology.
madhits45 said:
Thanks for the tip. Now I need to find help up-streaming my kernel:
Device info: https://valid.x86.fr/a/wkb2d8
Kernel source: http://support.asus.com.cn/Download.aspx?SLanguage=en&m=TX201LA&p=3&s=587
Could really use help doing that.. Total noob & trying to understand all the terminology.
Click to expand...
Click to collapse
Then go here: https://4pda.ru/forum/index.php?showtopic=530541
Palm Trees said:
Best bet https://forum.xda-developers.com/bliss-roms/bliss-roms-development/x86-bliss-x86-pc-s-t3534657
Click to expand...
Click to collapse
Palm Trees said:
Then go here: https://4pda.ru/forum/index.php?showtopic=530541
Click to expand...
Click to collapse
HOLLY $#%^ PALM TREES!!!!!!
Ok I checked out the Russian thread, which I cant believe I had never found, seriously what search engine do you use? Or are you Russian?
Anyway that lead me to this: https://cs5-3.4pda.to/10031052/20170404_145326.jpg?6c8bd0e99d5f5d5ce8c14e92c456565c
That might not mean much to many but its the TX201LA running the Asus memopad 10 android 4.2.2 and its actually working. So that is a huge deal.
Then I found this: https://forum.xda-developers.com/an.../rom-8-0-0-lineageos-15-0-unofficial-t3693838
There is a updated rom for the memopad 10. Now I hope I can get this rom to run with slight variations.. Will see..
madhits45 said:
HOLLY $#%^ PALM TREES!!!!!!
Ok I checked out the Russian thread, which I cant believe I had never found, seriously what search engine do you use? Or are you Russian?
Click to expand...
Click to collapse
No problem. I'm not Russian. I use Google mostly. My pride and joy is my memory (lol) :laugh: and I like to help if I can. Saw your thread and simply shared a few resources, I figured were helpful
With HD10 (2017) unlock/TWRP available - link (thanks to @k4y0z!!!), the next natural question is a custom ROM. The subject may turn out to be slightly trickier than what appears at first sight.
Let's have a discussion thread to brainstorm on this and not wonder off-topic in other places.
I had seen @DragonFire1024 & @Rortiz2 tried to work on that, so feel free to chime in as necessary.
What we have:
HD10 (2017) chipset - MT8173 (2+2 cores), there is an beefier brother to it, MT8176 (2+4 cores). For most practical purposes both chipsets seem almost identical software-wise.
MT8173 was introduced in March 2015 (time of Lollipop domination - Android 5). MT8176 was introduced in October 2016 (getting toward Nougat - Android 7).
The efforts up to date on a custom ROM for this chipset appear to be by @Goayandi, who is still active on XDA, so his work could be used a starting point. I believe @Goayandi was working on Android 7 (Nougat). Here are some of the original links:
XDA : Mediatek MT8173 & MT8176 development
Reddit: Mediatek MT8173 & MT8176 development
Stuff from Amazon for MT8173 (both HD10 2017 and FireTV2) is Lollipop-vintage (Android 5), other devices with these chipsets seem to have reached Nougat (Android 7). It does not appear that there is any known MT8173/MT8176 device with Android 8, or 9 (or is there?). It seems that @diplomatic has an Asus like this with Nougat.
At the moment, it feels a a Nougat custom ROM might be the ceiling for the device, given the difficulties of finding proprietary pieces for MTK chipsets to get Android 8 or 9 going. Now, even Android 7 is still a bit of a challenge, given limited prior success.
More thoughts/ideas? Feel free to fill this thread with random thoughts as much as you want - that's what it's for!!!
I'm really looking forward to an AOSP experience on this tablet, to be honest. Can't wait to see what they come up with!
GuyInDogSuit said:
I'm really looking forward to an AOSP experience on this tablet, to be honest. Can't wait to see what they come up with!
Click to expand...
Click to collapse
As long as I can set up everything properly I'm ready to go. I've managed to get past script issues I think. I can get it to flash and it boots to the orange fire logo and sits for eternity. This was the same result pre and post TWRP. So at this point it's probably the installation and improper setup of the tree and files. If someone can point me to a guide or give me instructions on how to add support to my AOSP working directory, that would be great. This bit of the leg work is hard as there really aren't any guides that are detailed enough or that work anymore.
Secondly, I think if we are going to use a kernel, we either use the 7.0 source, or just use the kit I have to build our own. Amazon cherry picked the crap out of the kernel practically to the bare bones, so I think expanding from it is just a waste of time, especially since we have the kit that does a lot of the work for us, including providing signatures and the tools to sign etc.
Sent from my Galaxy Tab3 Lite 7.0 using XDA Labs
I wouldn't mind even if the best ROM available is a 6.0 Marshmallow one. Anything that gives AOSP on a stable base for the Fire HD10 is going to be awesome.
DragonFire1024 said:
As long as I can set up everything properly I'm ready to go. I've managed to get past script issues I think. I can get it to flash and it boots to the orange fire logo and sits for eternity. This was the same result pre and post TWRP. So at this point it's probably the installation and improper setup of the tree and files. If someone can point me to a guide or give me instructions on how to add support to my AOSP working directory, that would be great. This bit of the leg work is hard as there really aren't any guides that are detailed enough or that work anymore.
Secondly, I think if we are going to use a kernel, we either use the 7.0 source, or just use the kit I have to build our own. Amazon cherry picked the crap out of the kernel practically to the bare bones, so I think expanding from it is just a waste of time, especially since we have the kit that does a lot of the work for us, including providing signatures and the tools to sign etc.
Sent from my Galaxy Tab3 Lite 7.0 using XDA Labs
Click to expand...
Click to collapse
So did you end up successfully unbricking your device?
I did share working amazon kernel sources in the HD-10 Unlock thread.
They worked well in my tree to compile TWRP.
k4y0z said:
So did you end up successfully unbricking your device?
I did share working amazon kernel sources in the HD-10 Unlock thread.
They worked well in my tree to compile TWRP.
Click to expand...
Click to collapse
Sorry for being out of the loop - were those kernel sources for Lollipop? Or does it even matter at all - meaning they would be good to go with newer Android versions as well.
Could you link to those posts in here?
bibikalka said:
Sorry for being out of the loop - were those kernel sources for Lollipop? Or does it even matter at all - meaning they would be good to go with newer Android versions as well.
Could you link to those posts in here?
Click to expand...
Click to collapse
They will likely need some patches to work with newer versions, but it's a good start I'd say.
It's the most recent version amazon has published.
k4y0z said:
So did you end up successfully unbricking your device?
I did share working amazon kernel sources in the HD-10 Unlock thread.
They worked well in my tree to compile TWRP.
Click to expand...
Click to collapse
I am working on it as we speak. I downloaded the zip from the second post in this thread, 1.1. extracted and ran sudo ./bootrom-step.sh. said it can't find build/payload directory it doesn't exist. So I assume I use that folder from the other unbricking thread copy it to yours? Assuming its a yes to that question, I keep getting the serial port errors. I also had to delete a setting in udev (this was my own addition to it) and rebooted PC. Now I am having a cigarette. When I do it again, if I still get serial port errors, time to try each of the 8 or 10 other ports on the PC.
Sent from my MotoG3 using XDA Labs
---------- Post added at 06:23 PM ---------- Previous post was at 06:21 PM ----------
bibikalka said:
Sorry for being out of the loop - were those kernel sources for Lollipop? Or does it even matter at all - meaning they would be good to go with newer Android versions as well.
Could you link to those posts in here?
Click to expand...
Click to collapse
The one I have and provided is a source to 7.0. looks nicely stocked.
Sent from my MotoG3 using XDA Labs
bibikalka said:
With HD10 (2017) unlock/TWRP available - link (thanks to @k4y0z!!!), the next natural question is a custom ROM. The subject may turn out to be slightly trickier than what appears at first sight.
Let's have a discussion thread to brainstorm on this and not wonder off-topic in other places.
I had seen @DragonFire1024 & @Rortiz2 tried to work on that, so feel free to chime in as necessary.
What we have:
HD10 (2017) chipset - MT8173 (2+2 cores), there is an beefier brother to it, MT8176 (2+4 cores). For most practical purposes both chipsets seem almost identical software-wise.
MT8173 was introduced in March 2015 (time of Lollipop domination - Android 5). MT8176 was introduced in October 2016 (getting toward Nougat - Android 7).
The efforts up to date on a custom ROM for this chipset appear to be by @Goayandi, who is still active on XDA, so his work could be used a starting point. I believe @Goayandi was working on Android 7 (Nougat). Here are some of the original links:
XDA : Mediatek MT8173 & MT8176 development
Reddit: Mediatek MT8173 & MT8176 development
Stuff from Amazon for MT8173 (both HD10 2017 and FireTV2) is Lollipop-vintage (Android 5), other devices with these chipsets seem to have reached Nougat (Android 7). It does not appear that there is any known MT8173/MT8176 device with Android 8, or 9 (or is there?). It seems that @diplomatic has an Asus like this with Nougat.
At the moment, it feels a a Nougat custom ROM might be the ceiling for the device, given the difficulties of finding proprietary pieces for MTK chipsets to get Android 8 or 9 going. Now, even Android 7 is still a bit of a challenge, given limited prior success.
More thoughts/ideas? Feel free to fill this thread with random thoughts as much as you want - that's what it's for!!!
Click to expand...
Click to collapse
Hi bibikalka,
Very good idea this thread.
What you can do, is to port a port a ROM of another MT8173 tablet to the FIRE HD10 2017.
This works and I have tested it on my BQ Aquaris M8 (MT8163) it has a similar MTK so I guess it will work. I have ported for example a ROM of an asus zenpad that uses MT8163 and at least the rom boots.
BTW: Oreo on MT8176: https://www.xda-developers.com/alldocube-x-10-5-inch-android-8-1-oreo/
DragonFire1024 said:
I am working on it as we speak. I downloaded the zip from the second post in this thread, 1.1. extracted and ran sudo ./bootrom-step.sh. said it can't find build/payload directory it doesn't exist. So I assume I use that folder from the other unbricking thread copy it to yours? Assuming its a yes to that question, I keep getting the serial port errors. I also had to delete a setting in udev (this was my own addition to it) and rebooted PC. Now I am having a cigarette. When I do it again, if I still get serial port errors, time to try each of the 8 or 10 other ports on the PC.
Click to expand...
Click to collapse
Apparently I forgot to add the right files.
give me a moment.
---------- Post added at 06:47 PM ---------- Previous post was at 06:36 PM ----------
DragonFire1024 said:
I am working on it as we speak. I downloaded the zip from the second post in this thread, 1.1. extracted and ran sudo ./bootrom-step.sh. said it can't find build/payload directory it doesn't exist. So I assume I use that folder from the other unbricking thread copy it to yours? Assuming its a yes to that question, I keep getting the serial port errors. I also had to delete a setting in udev (this was my own addition to it) and rebooted PC. Now I am having a cigarette. When I do it again, if I still get serial port errors, time to try each of the 8 or 10 other ports on the PC.
Click to expand...
Click to collapse
I have fixed the upload, please use amonet-suez-v1.1.1.zip
DragonFire1024 said:
The one I have and provided is a source to 7.0. looks nicely stocked.
Click to expand...
Click to collapse
But these aren't amazon sources are they?
They probably are missing some drivers then.
But if they are for mt8173 they could be used as a source to patch the amazon-sources.
k4y0z said:
Apparently I forgot to add the right files.
give me a moment.
---------- Post added at 06:47 PM ---------- Previous post was at 06:36 PM ----------
I have fixed the upload, please use amonet-suez-v1.1.1.zip
But these aren't amazon sources are they?
They probably are missing some drivers then.
But if they are for mt8173 they could be used as a source to patch the amazon-sources.
Click to expand...
Click to collapse
I'll provide a link in a few. Trying your fix now.
Sent from my Galaxy Tab3 Lite 7.0 using XDA Labs
Rortiz2 said:
Hi bibikalka,
Very good idea this thread.
What you can do, is to port a port a ROM of another MT8173 tablet to the FIRE HD10 2017.
This works and I have tested it on my BQ Aquaris M8 (MT8163) it has a similar MTK so I guess it will work. I have ported for example a ROM of an asus zenpad that uses MT8163 and at least the rom boots.
BTW: Oreo on MT8176: https://www.xda-developers.com/alldocube-x-10-5-inch-android-8-1-oreo/
Click to expand...
Click to collapse
Excellent find! Here is a review link:
https://forum.xda-developers.com/ge...ldocube-x-review-media-playback-king-t3902539
Alldocube X kind of has 2x of everything compared to HD10 2017, but at 2x price I wonder how fast Oreo would be on HD10 and if 2Gb of RAM would cut it. But this is definitely the device to copy if one wants latest and greatest!
And here is a thread with misc download links for ROMs:
https://forum.xda-developers.com/ge...n/10-5-inch-super-amoled-2560-x-1600-t3821327
bibikalka said:
Excellent find! Here is a review link:
https://forum.xda-developers.com/ge...ldocube-x-review-media-playback-king-t3902539
Alldocube X kind of has 2x of everything compared to HD10 2017, but at 2x price I wonder how fast Oreo would be on HD10 and if 2Gb of RAM would cut it. But this is definitely the device to copy if one wants latest and greatest!
And here is a thread with misc download links for ROMs:
https://forum.xda-developers.com/ge...n/10-5-inch-super-amoled-2560-x-1600-t3821327
Click to expand...
Click to collapse
I will try to port lineage 15.1 but the safest thing is that it will not work.
I have also ported an AOSP Rom for anyone who wants to try it. Tomorrow I will give more info.
Rortiz2 said:
I will try to port lineage 15.1 but the safest thing is that it will not work.
I have also ported an AOSP Rom for anyone who wants to try it. Tomorrow I will give more info.
Click to expand...
Click to collapse
This is great news! I am eagerly awaiting more info about this AOSP ROM
Rortiz2 said:
I will try to port lineage 15.1 but the safest thing is that it will not work.
I have also ported an AOSP Rom for anyone who wants to try it. Tomorrow I will give more info.
Click to expand...
Click to collapse
ffstudios said:
This is great news! I am eagerly awaiting more info about this AOSP ROM
Click to expand...
Click to collapse
Alright, we have both an eager developer, and a tester!!! Just remember, avoid bricking !
Very recently (March 2019) @wangyiling seems to have put together a LineageOS 15.1 ROM for MT8173/8176 - link, so hopefully we can re-purpose that for HD10. It's great to have an active developer elsewhere looking at the same thing!
It feels that if there is at least something that boots the kernel, it'd be a huge step forward.
bibikalka said:
Alright, we have both an eager developer, and a tester!!! Just remember, avoid bricking !
Very recently (March 2019) @wangyiling seems to have put together a LineageOS 15.1 ROM for MT8173/8176 - link, so hopefully we can re-purpose that for HD10. It's great to have an active developer elsewhere looking at the same thing!
It feels that if there is at least something that boots the kernel, it'd be a huge step forward.
Click to expand...
Click to collapse
If my testing on ROMs caused my brick, we have to be careful. I've been testing and flashing test ROMs for months now and never bricked like this. I think I may know what happened and if I'm right, I'm not sure what effect if any this will have on flashing a rom. According to the fstab.mt8173 file in the root directory, the partitions we flash for a rom, aren't part of the EMMC: data, system, cache are all ext4. All other partitions are however EMMC. So if I recall correctly, I did list the system as EMMC in the build script, but did intend to remove it. I made a last minute adjustment to the script and didn't change that part though.
https://forum.xda-developers.com/showpost.php?p=78542898&postcount=618
Sent from my MotoG3 using XDA Labs
Rortiz2 said:
I will try to port lineage 15.1 but the safest thing is that it will not work.
I have also ported an AOSP Rom for anyone who wants to try it. Tomorrow I will give more info.
Click to expand...
Click to collapse
I too am willing to test. Just let me know and I'll be sure to wear my best testing pants. [emoji41]
Sent from my SM-G9650/DS running stang5litre Pie ROM
AOSP ROM TEST 1 (suez)
Ok guys so here's the first test for the AOSP ROM.
First of all, I am not responsible for bricked devices. It is you who decides to try the ROM without knowing if it will work because it is a TEST.
DOWNLOAD: Removed
INSTALL INSTRUCTIONS:
- Boot TWRP
- Make NANDROID BACKUP
- Make wipes
- Format data
- Install ROM
- Reboot
Please. If the installation fails, send the errors and if the ROM starts, comment on the bugs.
Regards!
Rortiz2 said:
Ok guys so here's the first test for the AOSP ROM.
First of all, I am not responsible for bricked devices. It is you who decides to try the ROM without knowing if it will work because it is a TEST.
DOWNLOAD: https://mega.nz/#!C5dEQIKR!14BcGTiaT-xsrPUc-AxmWrTLj92Y5A2VgeNX2VA1uUE
INSTALL INSTRUCTIONS:
- Boot TWRP
- Make NANDROID BACKUP
- Make wipes
- Format data
- Install ROM
- Reboot
Please. If the installation fails, send the errors and if the ROM starts, comment on the bugs.
Regards!
Click to expand...
Click to collapse
Sounds good to me. Won't have a chance till later this afternoon/evening to give it a whirl, but when I do I'll definitely share my results and any information that may be useful. Thank you!
Sent from my SM-G9650/DS running stang5litre Pie ROM
Rortiz2 said:
Ok guys so here's the first test for the AOSP ROM.
First of all, I am not responsible for bricked devices. It is you who decides to try the ROM without knowing if it will work because it is a TEST.
DOWNLOAD: https://mega.nz/#!C5dEQIKR!14BcGTiaT-xsrPUc-AxmWrTLj92Y5A2VgeNX2VA1uUE
...
Please. If the installation fails, send the errors and if the ROM starts, comment on the bugs.
Click to expand...
Click to collapse
Which AOSP version is this? Could you try that Oreo Lineage stuff from @wangyiling at some point as well?
One of these days we'll have a ROM developer and a tester within the same person Too bad we've lost @DragonFire1024 since his tablet got bricked