version 4.1.2 rooted
apn settings set
sim card inserted nothing works non verizion sim, wont connect to a network for calls or to register the phone number etc etc.
how can i get this to work ?
SNWR34P3R said:
version 4.1.2 rooted
apn settings set
sim card inserted nothing works non verizion sim, wont connect to a network for calls or to register the phone number etc etc.
how can i get this to work ?
Click to expand...
Click to collapse
I have the same problem
GoDfRaG said:
I have the same problem
Click to expand...
Click to collapse
i went back to 4.0.4 then used odin and upgraded back to 4.1.2 reset wiped phone rebooted completly stock all root and custom recovery gone. used verizon software and went from mb1 to NE1 updated software now its at stock 4.4.2
i can insert a old rogers canada sim it sees network right away and shows up in APN
insert a new activated telus sim and it does not show anything except for the sim from unknown provider or non verizon sim crap but i know how to remove the system app for that notice does not change a thing.
i have used" phone info" and tried the different bands global, lte/cdma, gsm i have tried in service modes and dial pad codes (have not done *228 on 4g lte phones so its not a fried sim card) best i get with telus sim in and set in gsm mode is the can rogers network show up. nothing in the other modes.
i have manual tried the APN setting in phone and apn manager no change
i show a imei number however it is different from the original on the back sticker but the phone has no issues with the rogers sim card and the current phones imei so it changed at some point prob from a previous custom ROM but it is working to see a network just not activated on rogers
so now i have a unlocked bootloader, stock 4.4.2 clean phone 100% stock Verizon software i have read everything i can seem to dig up and still will not work
I have a Samsung Galaxy S3 SCH-I535 CDMA Verizon & GSM phone. Originally it was on android 4.1.2 and working fine for both CDMA and GSM (one at a time). CDMA EVDO Rev A data service was working fine.
I am using this phone in Nepal (not in USA). It was carrier unlocked for both CDMA & GSM when I purchased from Amazon. (so, I guess, Originally it may had some customized firmware/ROM for International use, I don’t have much idea).
I was asked for firmware upgrade every time when I run Samsung Kies. One day I clicked to upgrade the firmware. The upgrade was over successfully. But the new android version I found on my phone was 4.4.2.
In this version /new upgrade, I was unable to use CDMA data (EVDO-rev A). So I wanted to reverse back to old version. I search the process in Google and tried to load firmware with the help of Odin3 using this file:- “I535VRBMF1_I535VZWBMF1_VZW.zip”, but it was not successful. Result: Fail(Auth)
Then I loaded firmware for 4.4.2 using Odin3.09 (AP: “I535VRUDNE1_I535VZWDNE1_I535VRUDNE1_HOME.tar.md5”) and now the phone is working.
• If I use GSM SIM I can make call and use HSPA data service as well by adding new APN.
• If I use CDMA RUIM I can make call, BUT DATA SEVRICE using CDMA EVDO Rev A is NOT WORKING!! (I can not save APN in this case).
Now my issue is how to make CDMA EVDO data service working in my phone, because my basic requirement is to use this phone for CDMA service (voice + data).
I can edit the APN but when I click “Save”, nothing was saved. So I can not select APN for my carrier. I tried using APN Manager Pro too, here I can enter & enable the APN, but did not work. The phone is not able to dial the data access code #777 (verified from CDMA service provider side trace).
Can someone help me what I should do to make my phone working for CDMA data. My phone is rooted.
I guess it may work for CDMA data if I downgrade it to 4.3 or 4.1.2,
Can I do that. If so what are the procedures / steps. Any help in this regard would be highly appreciable.
My data worked this way
kkafle said:
I have a Samsung Galaxy S3 SCH-I535 CDMA Verizon & GSM phone. Originally it was on android 4.1.2 and working fine for both CDMA and GSM (one at a time). CDMA EVDO Rev A data service was working fine.
I am using this phone in Nepal (not in USA). It was carrier unlocked for both CDMA & GSM when I purchased from Amazon. (so, I guess, Originally it may had some customized firmware/ROM for International use, I don’t have much idea).
I was asked for firmware upgrade every time when I run Samsung Kies. One day I clicked to upgrade the firmware. The upgrade was over successfully. But the new android version I found on my phone was 4.4.2.
In this version /new upgrade, I was unable to use CDMA data (EVDO-rev A). So I wanted to reverse back to old version. I search the process in Google and tried to load firmware with the help of Odin3 using this file:- “I535VRBMF1_I535VZWBMF1_VZW.zip”, but it was not successful. Result: Fail(Auth)
Then I loaded firmware for 4.4.2 using Odin3.09 (AP: “I535VRUDNE1_I535VZWDNE1_I535VRUDNE1_HOME.tar.md5”) and now the phone is working.
• If I use GSM SIM I can make call and use HSPA data service as well by adding new APN.
• If I use CDMA RUIM I can make call, BUT DATA SEVRICE using CDMA EVDO Rev A is NOT WORKING!! (I can not save APN in this case).
Now my issue is how to make CDMA EVDO data service working in my phone, because my basic requirement is to use this phone for CDMA service (voice + data).
I can edit the APN but when I click “Save”, nothing was saved. So I can not select APN for my carrier. I tried using APN Manager Pro too, here I can enter & enable the APN, but did not work. The phone is not able to dial the data access code #777 (verified from CDMA service provider side trace).
Can someone help me what I should do to make my phone working for CDMA data. My phone is rooted.
I guess it may work for CDMA data if I downgrade it to 4.3 or 4.1.2,
Can I do that. If so what are the procedures / steps. Any help in this regard would be highly appreciable.
Click to expand...
Click to collapse
I think your problem is the region is not set Nepal...I installed dark jb rom in my phone and data was gone since then. Then I manually downloaded stock firmware and flashed through odin but still data wasnt working,nd while in recovery mode i saw region INS ie India. then something came in my mind and.. .I changed it to NPL and now i can use data in only sim 1 only not in both sims. So i also may need some help.
For you *#272*IMEI# . Use your phones IMEI number there (*#06#) . Select NPL region.
NOTE: It will hard format your phone installing required carrier apps, aps, bla bla and hope work on your phone
Pujan Shrestha said:
I think your problem is the region is not set Nepal...I installed dark jb rom in my phone and data was gone since then. Then I manually downloaded stock firmware and flashed through odin but still data wasnt working,nd while in recovery mode i saw region INS ie India. then something came in my mind and.. .I changed it to NPL and now i can use data in only sim 1 only not in both sims. So i also may need some help.
For you *#272*IMEI# . Use your phones IMEI number there (*#06#) . Select NPL region.
NOTE: It will hard format your phone installing required carrier apps, aps, bla bla and hope work on your phone
Click to expand...
Click to collapse
I found that the hidden menu (& hence secret code dialing) was disabled in my phone. Following guides from Google search I enabled it. Now codes likes "*#06#",*#1111#", "*#0228#" etc are working, but "*#272*IMEI#" is not working. Any idea, why it is not working?
kkafle said:
I have a Samsung Galaxy S3 SCH-I535 CDMA Verizon & GSM phone. Originally it was on android 4.1.2 and working fine for both CDMA and GSM (one at a time). CDMA EVDO Rev A data service was working fine.
I am using this phone in Nepal (not in USA). It was carrier unlocked for both CDMA & GSM when I purchased from Amazon. (so, I guess, Originally it may had some customized firmware/ROM for International use, I don’t have much idea).
I was asked for firmware upgrade every time when I run Samsung Kies. One day I clicked to upgrade the firmware. The upgrade was over successfully. But the new android version I found on my phone was 4.4.2.
In this version /new upgrade, I was unable to use CDMA data (EVDO-rev A). So I wanted to reverse back to old version. I search the process in Google and tried to load firmware with the help of Odin3 using this file:- “I535VRBMF1_I535VZWBMF1_VZW.zip”, but it was not successful. Result: Fail(Auth)
Then I loaded firmware for 4.4.2 using Odin3.09 (AP: “I535VRUDNE1_I535VZWDNE1_I535VRUDNE1_HOME.tar.md5”) and now the phone is working.
• If I use GSM SIM I can make call and use HSPA data service as well by adding new APN.
• If I use CDMA RUIM I can make call, BUT DATA SEVRICE using CDMA EVDO Rev A is NOT WORKING!! (I can not save APN in this case).
Now my issue is how to make CDMA EVDO data service working in my phone, because my basic requirement is to use this phone for CDMA service (voice + data).
I can edit the APN but when I click “Save”, nothing was saved. So I can not select APN for my carrier. I tried using APN Manager Pro too, here I can enter & enable the APN, but did not work. The phone is not able to dial the data access code #777 (verified from CDMA service provider side trace).
Can someone help me what I should do to make my phone working for CDMA data. My phone is rooted.
I guess it may work for CDMA data if I downgrade it to 4.3 or 4.1.2,
Can I do that. If so what are the procedures / steps. Any help in this regard would be highly appreciable.
Click to expand...
Click to collapse
Well, it looks to me as though you've locked your bootloader and are now stuck on 4.4.2. For some reason, Verizon forces Samsung to lock their bootloaders, which means we (the consumers) cannot install "custom" firmware on our devices (or downgrade).
Once you're on 4.4.2 NE1 your stuck with it. No downgrade possible at least not without a Jtag service
Sent from my SCH-I535 using Xparent ICS Tapatalk 2
I have faced similar problem I can't create apn I am using it in India . So my data i not working on any sim card but i can make and receive calls . My android version is also 4.3 . So please help me i want to use both hspa and evdo .
Sent from my iPhone using Tapatalk
I have a sprint gs5, i rooted it, flashed a modded verizon rom for verizons gs5. Boots up no problem. A couple processes stopping occationally. But otherwise seems to be working. I put my sim card in and it said the phone was activated and features updated. But its not my phone number. Its the phone number of the previous owner. I am trying to work on the programming but the programming codes you dial in the phone app do not seem to function. Just calls and says the accountcant be verified. Pretty sure its still sprints network talking as well. I did go try to add apn's but after hitting save they dont show on the list.
Sprint samsung gs5 with verizon rom and philz recovery flashed with ODIN
Rom currently installed: OptimalROM_15_odex-edition_bigbot96
Was not rooted or modified before i got the device.
Also the tutorials said thAt su would disable knox but that never popped up in my experience.
Boots i to recovery fine. Boots into system fine. Does not seem to accept programming codes. (Maybe they are differentforverizon?)
Safestrap apk installed but is blank when opened other thAn title bar.
Busybox and su both installed and work. Titanium bu installed and works.
I havent tried to contact verizon about anything yet.
Can anyone help me with the network programming?
I have qpst on my pc and the phone is detected. Reading about the spc and stuff like that but according to the pc the spc is all zeros already, i read that they are different on non vzw devices.
Maybe in over my head, just getting frustrated.
Will try to get some screenshots of the about phone details asap
If the phone is still using the previous owner's phone number, start by doing a factory reset in recovery. Then let us know what happens after it boots into Android.
Hello everyone,
I just dug up my old phone (HTC inspire 4g AT&T - Sim factory unlocked) and managed to install a custom rom from this site (from interestit.com). The phone is not rooted i think and has S-ON. But the problem i have is although i am able to put a sim and get the local carrier working i am not able to start up mobile data.
When turning on mobile data from the drop down menu a red cross is shown and no data i being transferred through the network, i tried setting up the APN settings but it doesnt work
Any help given is really appreciated.
Thanks
So I have a note 3 sm-n900p I want to flash if needed to Assurance Wireless that is through Virgin Mobile through Sprint. The phone they gave me is a ANS UL40 that takes a sim card. I don't know if it is a GSM hybrid or what. If I do not have a sim installed in it, it says no service. So here is what I have tried on the note 3. Stock rom installed MJ4 modem sim unlocked. TWRP and rooted. Also tried ssu.apk region lock away.apk. ssu crashes and region lock says ok. Also have tried custom rom's (many) with or without MJ4 modem. Also did the *#0011# and changed settings to menu > key input > Q,
menu > back,
menu > key input > 0000.
Wait for about 20 seconds then a menu will appear. Once the menu appears go to:
>UE SETTING & INFO
>SETTING
>PROTOCOL
>GCF
>GSM/(E)GPRS/WCDMA GCF ON
Either way I still get on any of these changes no sim or sim card not detected or sim card has locked reboot phone.
Also have tried DFS tool and change all info to what I get off the other phone Like IMEI and such, still same. Anybody have any suggestions on how to get the note 3 to take the sim card on assurance wireless? I have tried so many roms and so many ways of flashing with no luck. I have sim unlocked this phone before and it worked on Tag Mobile which is through T-mobile. Please give me any suggestions on what to do, will try anything. Thanks
Also forgot to mention I have used HLTE and HLTESPR roms and modems still no luck
Hope u figure out. I have same exact two phones. Even versions are same. I will be trying a few things later today keep you posted.
Assurance Wireless sux. Need I say more. Going to another carrier.......
Did you ever find a way to root your ANS UL40? I have one myself, & haven't found any way to do so.
HELP!!!
is there a way to flash assurance wireless to samsung galaxy note 4/ android oreo 8.1/lineage OS version?