I have an Alcatel Onetouch Pixi 3 (10) Wifi 8079 tablet with an MT8127. I tried flashing a twrp recovery following Kirito’s guide but I had a glitching screen in a bootloop instead, so I tried flashing another twrp providedby the same user (was named twrp-new) and instead of the glitchy screen this time I’d see the twrp logo and then it would auto reboot after giving several unable to mount data errors. I was not able to do anything in twrp.
I then formatted the whole device except the bootloader. I realize that I should now be flashing a ROM (I have all the required stock ROM files including the scatter file) but SP Flash Tool won’t recognize my device (on three different OSes: Win7, Win8.1, a Linux distro). I also tried out Mobile Upgrade S but it too won’t see my device.
The device’s battery is soldered with three wires to the motherboard, so I can’t easily plug it out. Why do you think that my laptop won’t detect the device? Could it be that the tablet is running all the time (so it’s not off) and the battery lasts long because the device isn’t performing any operations?
As for drivers, when I used SP Flash Tool to flash the new twrp, I didn’t install any drivers myself on Windows 7. Now that it didn’t recognize my device, I installed all kinds of drivers on both Win 7 and 8.1 like MediaTek VCOM USB and Preloader drivers but I stll couldn’t get it to work. I get no feedback from my device no matter what I do (power button, volume up and down buttons).
Do not say that it is hard bricked because all I did was formatting the device except the bootloader.
tesiz22 said:
I have an Alcatel Onetouch Pixi 3 (10) Wifi 8079 tablet with an MT8127. I tried flashing a twrp recovery following Kirito’s guide but I had a glitching screen in a bootloop instead, so I tried flashing another twrp providedby the same user (was named twrp-new) and instead of the glitchy screen this time I’d see the twrp logo and then it would auto reboot after giving several unable to mount data errors. I was not able to do anything in twrp.
I then formatted the whole device except the bootloader. I realize that I should now be flashing a ROM (I have all the required stock ROM files including the scatter file) but SP Flash Tool won’t recognize my device (on three different OSes: Win7, Win8.1, a Linux distro). I also tried out Mobile Upgrade S but it too won’t see my device.
The device’s battery is soldered with three wires to the motherboard, so I can’t easily plug it out. Why do you think that my laptop won’t detect the device? Could it be that the tablet is running all the time (so it’s not off) and the battery lasts long because the device isn’t performing any operations?
As for drivers, when I used SP Flash Tool to flash the new twrp, I didn’t install any drivers myself on Windows 7. Now that it didn’t recognize my device, I installed all kinds of drivers on both Win 7 and 8.1 like MediaTek VCOM USB and Preloader drivers but I stll couldn’t get it to work. I get no feedback from my device no matter what I do (power button, volume up and down buttons).
Do not say that it is hard bricked because all I did was formatting the device except the bootloader.
Click to expand...
Click to collapse
Did you ever get this resolved? I have this same exact problem just with a different device
ayetab said:
Did you ever get this resolved? I have this same exact problem just with a different device
Click to expand...
Click to collapse
I have got it all resolved. My device is running fine with Magisk. I recommend that you take a look at my post history.
tesiz22 said:
I have got it all resolved. My device is running fine with Magisk. I recommend that you take a look at my post history.
Click to expand...
Click to collapse
How do I see your post history? I have a Blu view 3 and pc recognizes it cause I hear the ding sound I'm stuck in fastboot mode cause dm-verity failed I need to flash stock eom but flash tool just sits there nothing happens.
Kireej said:
How do I see your post history? I have a Blu view 3 and pc recognizes it cause I hear the ding sound I'm stuck in fastboot mode cause dm-verity failed I need to flash stock eom but flash tool just sits there nothing happens.
Click to expand...
Click to collapse
I don't know what a Blu view 3 is, but you can click my name to open my profile and hit "postings" to see my post history.
Related
Hello,
I have a new Lenovo A606, that came with a strange ROM (IMEI not recognized, some weird WIFI setup) from 2014. I was able to set it up and correct the problems (thanks to google), but I still had some language issues (the Lenovo Apps including dialer, contacts, sms, etc… were English only). I was able to root it fine, and no working problem.
I decided to install a clean stock ROM, ROW: the A606_USR_S036_1502271022_V3_MP_ROW that is more recent and fully supports multilanguage.
I took a PC with Windows XP, and installed the latest SP Flash Tool, following a tutorial.
I was able to install android adb drivers and the MTK driver from the ROM image. The phone was showing in the devices, then was disappearing, then showing again… I had an error, but then I tried again with the option to update the firmware, and the Flash Tool reached the end and said it flashed succesfully.
Problem: after that, the phone was totally bricked. It would not start at all. When I plug it on the PC, it shows sporadically a device called "VENDOR 0E8D - communication" that disappears very quickly. I cannot flash it again. I just lost my brand new phone…
I tried with SP Flash Tool, and Flash SPMDT, with different ROMs, CN only, ROW, different versions… But nothing. It always says that Flash failed. Even when the phone is not plugged, I have an error with Flash SPMDT, with all ROMs, saying that (1)COM ports number is repetitive or invalid, or (2) Brom and preloader have the same comport number! and it asks me to modify them in INI file or scan again. Of course, scan fails, when I plug the phone pressing vol up + vol down (only way to make the phone recognized by the computer without a battery), the progress goes to 100% then either stays stuck there, or says it failed. SP Flash Tools gives this error: 'BROM ERROR s_ft_enable_dram_fail (4032)'
I tried several drivers, to clean drivers with usbdview, I tried several versions of SP Flash Tools… I don't know what to do anymore. I hope that Lenovo has a warranty and that they could flash it back to normal.
I don't know if it is a problem accessing the META mode on the phone, or bad roms… I tried on one computer with XP, and another with Windows 8.1, and the problem is the same.
ANY HELP would be appreciated, thank you!
Hi, thank you for using XDA Assist. It sounds like you've tried everything possible. Since it sporadically shows up on your pc try a different USB cable. If that doesn't work then I think it is bricked and you'll have to check with whomever you purchased the device from to see if they can fix it.
Thread closed.
I wanted to put a new rom on my Lenovo, so I started here: http://forum.xda-developers.com/lenovo-a850/general/tutorial-install-cwm-twrp-lenovo-a850-t2642431
I thought making a backup would be wise.
My Baseband model did not have ROW or CN in it, so after trying all four options EN/CN CWM/TWRP options, all failed an my phone would just reboot.
May be my mistake was trying a few more versions of CWM/TWRP, after one of which my Baseband model was gone...
So I decided to just go ahead and install a new rom without a backup. I installed the VCOM drivers (Win 8.1, a bit of hassle) and downloaded: http://www.needrom.com/download/a850-stock-s123-multilanguagegappsroot/
Тhе flashing process went OK (I got the green circle), but after disconnecting my phone and putting the battery back in, it would not start at all. Not even recovery mode.
I tried flashing another rom, but the PC/flash tool would not detect the phone again.
Тhe only sign of life is the red led when I connect the USB to the PC (without battery).
Any help would be appreciated.
P.S.: Also the phone stopped detecting my SIM cards while trying different CWM/TWRP versions.
P.P.S.: I actually was able to get a response from the flash tool by holding power, volume + and volume -, and got: ERROR 4032 : Enable DRAM failed!
mandulov said:
I wanted to put a new rom on my Lenovo, so I started here: http://forum.xda-developers.com/lenovo-a850/general/tutorial-install-cwm-twrp-lenovo-a850-t2642431
I thought making a backup would be wise.
My Baseband model did not have ROW or CN in it, so after trying all four options EN/CN CWM/TWRP options, all failed an my phone would just reboot.
May be my mistake was trying a few more versions of CWM/TWRP, after one of which my Baseband model was gone...
So I decided to just go ahead and install a new rom without a backup. I installed the VCOM drivers (Win 8.1, a bit of hassle) and downloaded: http://www.needrom.com/download/a850-stock-s123-multilanguagegappsroot/
Тhе flashing process went OK (I got the green circle), but after disconnecting my phone and putting the battery back in, it would not start at all. Not even recovery mode.
I tried flashing another rom, but the PC/flash tool would not detect the phone again.
Тhe only sign of life is the red led when I connect the USB to the PC (without battery).
Any help would be appreciated.
P.S.: Also the phone stopped detecting my SIM cards while trying different CWM/TWRP versions.
P.P.S.: I actually was able to get a response from the flash tool by holding power, volume + and volume -, and got: ERROR 4032 : Enable DRAM failed!
Click to expand...
Click to collapse
Welp, bad luck happened. Try getting it seviced to Lenovo Center.
irfanadli97 said:
Welp, bad luck happened. Try getting it seviced to Lenovo Center.
Click to expand...
Click to collapse
Very helpful, thank you...
After trying many different SP Flash Tool versions and ROM, I was actually able to resurrect my Lenovo by doing a Firmware Upgrade with the latest SP Flash Tool (version 5 something) and using a A850i ROM from needrom.com
No issues so far, but I'm basically back where I started from
i think u have flashed a850 4gb version firmware. same thing happen to my phone. but fixed it with a850i firmware.
Hi guys,
I got a OPO borrowed from a friend because my OP3T is going to RMA.
When I first turned it on it had 1% battery. The phone wasn't used for a month. I proceded to recharge the battery. This took almost 18h. I saw the low battery error 3 or 4 times during attempts to power on the handset.
After full charge in installed the latest build of Lineage OS via TWRP. Unfortunately as I was having some WIFI connectivity issues I read that flashing the c7 modem firmware could solve the problem.
I was in TWRP flashing this same zip via sideload with an unbeknownst to me faulty cable. I grabbed the handset mid flash, and it fails with a connectivity error. I tried repeating the process with no luck, as I could not by any means regain adb connection to the handset. And then i decided to reboot and download the zip directly to the phone, without remembering this broken flash attempt could brick the phone. After rebooting I never saw again the One Plus logo neither felt the startup vibration. I tried power cycling with no success, and I cannot by any means detect the phone in windows device manager to attempt the usual unbrick procedures via COLOR or OnePlusRecoveryTool.
Windows doesn't even try to install drivers. It's as if the phone is completely shutdown forever.
What do you think. Did I really hard brick this phone? Is it a battery issue? Any ideas. I really liked to recover the phone to return it to my friend!
Thanks in advance for your help!
joao.m.neto said:
Hi guys,
I got a OPO borrowed from a friend because my OP3T is going to RMA.
When I first turned it on it had 1% battery. The phone wasn't used for a month. I proceded to recharge the battery. This took almost 18h. I saw the low battery error 3 or 4 times during attempts to power on the handset.
After full charge in installed the latest build of Lineage OS via TWRP. Unfortunately as I was having some WIFI connectivity issues I read that flashing the c7 modem firmware could solve the problem.
I was in TWRP flashing this same zip via sideload with an unbeknownst to me faulty cable. I grabbed the handset mid flash, and it fails with a connectivity error. I tried repeating the process with no luck, as I could not by any means regain adb connection to the handset. And then i decided to reboot and download the zip directly to the phone, without remembering this broken flash attempt could brick the phone. After rebooting I never saw again the One Plus logo neither felt the startup vibration. I tried power cycling with no success, and I cannot by any means detect the phone in windows device manager to attempt the usual unbrick procedures via COLOR or OnePlusRecoveryTool.
Windows doesn't even try to install drivers. It's as if the phone is completely shutdown forever.
What do you think. Did I really hard brick this phone? Is it a battery issue? Any ideas. I really liked to recover the phone to return it to my friend!
Thanks in advance for your help!
Click to expand...
Click to collapse
Could be a battery issue too since the device was unused for a month. Did you tried booting into fastboot mode or TWRP?
Which windows are you using?(I suggest you use winXp and win7) Did you tried the qualcomm 2012 drivers from the Color Os toolkit thread and the drivers given on Cm11s restore toolkit thread? -you should know that the fastboot(/adb) drivers will not work for qualcomm diagnostic port method(which the both toolkits are based on).
Mr.Ak said:
Could be a battery issue too since the device was unused for a month. Did you tried booting into fastboot mode or TWRP?
Which windows are you using?(I suggest you use winXp and win7) Did you tried the qualcomm 2012 drivers from the Color Os toolkit thread and the drivers given on Cm11s restore toolkit thread? -you should know that the fastboot(/adb) drivers will not work for qualcomm diagnostic port method(which the both toolkits are based on).
Click to expand...
Click to collapse
No success booting with volume up or down so no fastboot neither twrp. I'm using windows 10 (only one i have). I can't install the drivers because the device doesn't show up on device manager right?
I'll try finding a win XP although I'm sensing the habdset isn't powering at all...
Sent from my ONEPLUS A3003 using Tapatalk
joao.m.neto said:
No success booting with volume up or down so no fastboot neither twrp. I'm using windows 10 (only one i have). I can't install the drivers because the device doesn't show up on device manager right?
I'll try finding a win XP although I'm sensing the habdset isn't powering at all...
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
Yes,as I said, could be a battery issue but we are still not sure yet.I can give you the link for winxp or win7 if you need and then you can dual-boot it alongside windows10.You should install drivers from cm11s restore toolkit thread(executable drivers),maybe then your device will show up in device manager though it is highly advised to do this on Xp or 7 since 8,8.1 and 10 has driver signing issues.
Good day. I have made COUNTLESS efforts, methods, ways to unbrick my Hard Bricked
"ALMOST DEAD"?? Phone. I've watched so many vids on YTube and read alot in this forum
Here's some of the details of what i've been through.. Please help Me.. and thanks in advance..
PLEASE PLEASE.. Finish reading my thread.. I also provide some screenshot for reference of what happened..
THANK YOU SO MUCH IN ADVANCE.. MORE POWER..
I already tried the method of
"Download Only" or Flash the
1. "preloader" first
then after that untick/deselect it
2. load/flash other stuff (lk,boot,recovery,logo,secro,system,cache,userdata)
3. ALSO TRIED. Not flashing the (cache & userdata)
4. I used the stock rom. (Downloaded from ndrom)
5. Still. NO LUCK.
AFTER FLASHING EVERYTHING.
DID NUMEROUS FLASHING METHOD I READ FROM
COUNTLESS WEBSITES and FORUMS.
STILL. My phone is dead.
1. Not charging.
2. (NEW CHARGER) (NEW CHARGING CABLE)
still not charging. (NO LOGO) (NO VIBRATION)
3. I fully charged my (REMOVABLE BATTERY) using UNIVERSAL CHARGER.
4. I even bought new battery (SAME MODEL)
5. No luck.
Here's what happened (BEFORE BRICK)
1. My Phone (FIREFLY INTENSE XL) hanged then suddenly turned off.
2. I switched it on. It started well.
3. After few seconds, it restarted.
4. Now, stuck at logo.
5. I've waited for many hours. Still stuck at logo.
6. GOOGLED how to FACTORY RESET.
7. Had some luck? I was able to boot at FACTORY OPTIONS
(Chinese Text)
8. I GOOGLED again what's this chinese character/text means.
9. I GOOGLED how to FACTORY RESET.
10. Now, i chosed the option that has **EMMC text on it.
11. I Reboot the phone. STILL-Stock at logo.
.....Now I begin flashing using LATEST to OLDEST SPFlashTool.
**I made sure that my Battery level is 90%++
12. Flashed the phone for (FIRST TIME)
*I used the "Download Only" Option
*After first time flashing. Still stock at logo.
*Waited for almost (10 Mins. Only)
****Before Second flashing. I know,
My Computer (device manager) still detects my phone normally as Portable Device.
That's the normal detection before I bricked my phone.
...Now
13. Flashed (SECOND TIME)
*I used the "Format ALL and Download" Option
*After 2nd time flashing. Now, it didn't boot.
*I decided to charge it. Now, stock at charging logo.
No indication that it is charging. Mere charging logo. Logo is not moving up nor down.
**Now my PC couldn't detect my device like before--
it has sound of reconnects and disconnect.
Sound and Device Manager indicator.
**It say's in Device Manager
Connected (MediaTek USB Port (COM6)
Reconnect (MediaTek Preloader USB VCOM (Android)(COM5)
14. Yet after that, I managed to Format the phone using SPFLASHTOOl Format Tab.
*After that
*NO BATTERY LOGO even I plugged the phone in charger
-waited for several mins. still no BAT. LOGO
*NO VIBRATION
*I CHARGED THE BATTERY using UNIV. Charger
*BOUGHT NEW BATTERY (SAME MODEL) (FULLY CHARGED)
*Paperweight?
*No logo
*No battery nor charging logo like before
*No vibration
*Yet, my last hope? (Hopeful)
My PC/DEVICE MANAGER detects it
**It say's in Device Manager
Connected (MediaTek USB Port (COM6)
Reconnect (MediaTek Preloader USB VCOM (Android)(COM5)
NOTE:
*I used DESKTOP and LAPTOP both has Windows 10 32Bit OS.
*Installed all the required USB/PORT Driver
*New charging cable/data cable
*Tried different ports
*Tried different speed in SPFT (HiSpeed & FullSpeed)
*Tried flashing one-by-one
*Tried "Download Only" & "Format all+Download"
after "Almost no life at all"
====First I used MY OFFICIAL UPDATED ROM.
Next, the Outdated ROM. Last, CUSTOM ROM - No Luck.
-----BUT------
There's this youtube video
How to unbrick Any dead mtk phone 100% tested solution
I googled and saw a video on youtube that, advance option + Physical Format option could be
one of the essential *Last Resort to be able to SUCCESFULLY FLASH your CHINESE PHONE.
Sadly, I believe, in NEWER version of SPFT it's not possible when you load the MT6580 scatter file?
I also used old-oldest version of SPFT but it everytime i load the scatter file it says some error
*not legal blah blah blah? Please. Do you have any idea?
Is it possible in MTK6580?
I used old-oldest version of SPFT
version(s) 3.xxxx But, it won't allow to load my MT6580.
Any way to bypass it? Please..
PHOTO FOR REFERENCE. THANKS IN ADVANCE..
I GUESS.. MY LAST RESORT? IF YOU WATCHED THE EMBED VIDEO FROM YOUTUBE..
HERE'S WHAT HAPPENED..
METHOD I haven't tried..
FLASH USING Windows 7 OS.
QUESTION:
What is CYANOGEN OS?
Can I unbrick my phone using that OS? or by upgrading or downgrading it?
Is there any other tool to force my phone to take all the ROMS or format it?
Please Please.. Help me..
Thanks in advance and more power..
limereyes said:
Good day. I have made COUNTLESS efforts, methods, ways to unbrick my Hard Bricked
"ALMOST DEAD"?? Phone. I've watched so many vids on YTube and read alot in this forum
Here's some of the details of what i've been through.. Please help Me.. and thanks in advance..
PLEASE PLEASE.. Finish reading my thread.. I also provide some screenshot for reference of what happened..
THANK YOU SO MUCH IN ADVANCE.. MORE POWER..
I already tried the method of
"Download Only" or Flash the
1. "preloader" first
then after that untick/deselect it
2. load/flash other stuff (lk,boot,recovery,logo,secro,system,cache,userdata)
3. ALSO TRIED. Not flashing the (cache & userdata)
4. I used the stock rom. (Downloaded from ndrom)
5. Still. NO LUCK.
AFTER FLASHING EVERYTHING.
DID NUMEROUS FLASHING METHOD I READ FROM
COUNTLESS WEBSITES and FORUMS.
STILL. My phone is dead.
1. Not charging.
2. (NEW CHARGER) (NEW CHARGING CABLE)
still not charging. (NO LOGO) (NO VIBRATION)
3. I fully charged my (REMOVABLE BATTERY) using UNIVERSAL CHARGER.
4. I even bought new battery (SAME MODEL)
5. No luck.
Here's what happened (BEFORE BRICK)
1. My Phone (FIREFLY INTENSE XL) hanged then suddenly turned off.
2. I switched it on. It started well.
3. After few seconds, it restarted.
4. Now, stuck at logo.
5. I've waited for many hours. Still stuck at logo.
6. GOOGLED how to FACTORY RESET.
7. Had some luck? I was able to boot at FACTORY OPTIONS
(Chinese Text)
8. I GOOGLED again what's this chinese character/text means.
9. I GOOGLED how to FACTORY RESET.
10. Now, i chosed the option that has **EMMC text on it.
11. I Reboot the phone. STILL-Stock at logo.
.....Now I begin flashing using LATEST to OLDEST SPFlashTool.
**I made sure that my Battery level is 90%++
12. Flashed the phone for (FIRST TIME)
*I used the "Download Only" Option
*After first time flashing. Still stock at logo.
*Waited for almost (10 Mins. Only)
****Before Second flashing. I know,
My Computer (device manager) still detects my phone normally as Portable Device.
That's the normal detection before I bricked my phone.
...Now
13. Flashed (SECOND TIME)
*I used the "Format ALL and Download" Option
*After 2nd time flashing. Now, it didn't boot.
*I decided to charge it. Now, stock at charging logo.
No indication that it is charging. Mere charging logo. Logo is not moving up nor down.
**Now my PC couldn't detect my device like before--
it has sound of reconnects and disconnect.
Sound and Device Manager indicator.
**It say's in Device Manager
Connected (MediaTek USB Port (COM6)
Reconnect (MediaTek Preloader USB VCOM (Android)(COM5)
14. Yet after that, I managed to Format the phone using SPFLASHTOOl Format Tab.
*After that
*NO BATTERY LOGO even I plugged the phone in charger
-waited for several mins. still no BAT. LOGO
*NO VIBRATION
*I CHARGED THE BATTERY using UNIV. Charger
*BOUGHT NEW BATTERY (SAME MODEL) (FULLY CHARGED)
*Paperweight?
*No logo
*No battery nor charging logo like before
*No vibration
*Yet, my last hope? (Hopeful)
My PC/DEVICE MANAGER detects it
**It say's in Device Manager
Connected (MediaTek USB Port (COM6)
Reconnect (MediaTek Preloader USB VCOM (Android)(COM5)
NOTE:
*I used DESKTOP and LAPTOP both has Windows 10 32Bit OS.
*Installed all the required USB/PORT Driver
*New charging cable/data cable
*Tried different ports
*Tried different speed in SPFT (HiSpeed & FullSpeed)
*Tried flashing one-by-one
*Tried "Download Only" & "Format all+Download"
after "Almost no life at all"
====First I used MY OFFICIAL UPDATED ROM.
Next, the Outdated ROM. Last, CUSTOM ROM - No Luck.
-----BUT------
There's this youtube video
How to unbrick Any dead mtk phone 100% tested solution
I googled and saw a video on youtube that, advance option + Physical Format option could be
one of the essential *Last Resort to be able to SUCCESFULLY FLASH your CHINESE PHONE.
Sadly, I believe, in NEWER version of SPFT it's not possible when you load the MT6580 scatter file?
I also used old-oldest version of SPFT but it everytime i load the scatter file it says some error
*not legal blah blah blah? Please. Do you have any idea?
Is it possible in MTK6580?
I used old-oldest version of SPFT
version(s) 3.xxxx But, it won't allow to load my MT6580.
Any way to bypass it? Please..
PHOTO FOR REFERENCE. THANKS IN ADVANCE..
I GUESS.. MY LAST RESORT? IF YOU WATCHED THE EMBED VIDEO FROM YOUTUBE..
HERE'S WHAT HAPPENED..
METHOD I haven't tried..
FLASH USING Windows 7 OS.
QUESTION:
What is CYANOGEN OS?
Can I unbrick my phone using that OS? or by upgrading or downgrading it?
Is there any other tool to force my phone to take all the ROMS or format it?
Please Please.. Help me..
Thanks in advance and more power..
Click to expand...
Click to collapse
Cyanogen OS is a custom rom. It can only flash through custom recovery. But you can't even access the recovery mode then it can't help you to unbrick your android.
Other method to physical format using spft?
Ashwinrg said:
Cyanogen OS is a custom rom. It can only flash through custom recovery. But you can't even access the recovery mode then it can't help you to unbrick your android.
Click to expand...
Click to collapse
Thanks for the reply..
1. I just wanna ask, do you have any idea or IS IT POSSIBLE? to format my device using the
ADVANCE OPTION + PHYSICAL FORMAT FORCEDLY ERASE (BAD BLOCK MARK IS ERASED) in SPFT?
I see that option in new-latest version of SPFT but, WHENEVER my ROM were already loaded (MTK6580), that option is gone.
I GOOGLED it but I can't seem to find the right keyword for it.. Do you have any idea? even in other android tool?
There's this guy on YTube that, did that method
KEYWORD: How to unbrick Any dead mtk phone 100% tested solution
I can't upload the video..
Also, what is the BEST METHOD to flash the ROM using Windows 7?
I managed to borrow a laptop with WINDOWS 7 32Bit OS installed.
*Should I flash the preloader again?
*Should I untick/deselect it (preloader) and ALWAYS flash other stuff? except CACHE & USERDATA?
* I flashed countless times, I just don't want to make things worse..
**Is it possible to install or flash my rom to EXTERNAL SD? and be able to boot my phone using it? There's this guy on Ytube did that to his dead phone and it booted..
He used, some sort of image file and installed it in sd card using wind32diskimager..
Is it possbile? or for some phone models only?
https://forum.xda-developers.com/yu-yuphoria/help/how-to-fixing-hardbricked-yuphoria-t3330604
Thanks and have a nice day..
limereyes said:
Thanks for the reply..
1. I just wanna ask, do you have any idea or IS IT POSSIBLE? to format my device using the
ADVANCE OPTION + PHYSICAL FORMAT FORCEDLY ERASE (BAD BLOCK MARK IS ERASED) in SPFT?
I see that option in new-latest version of SPFT but, WHENEVER my ROM were already loaded (MTK6580), that option is gone.
I GOOGLED it but I can't seem to find the right keyword for it.. Do you have any idea? even in other android tool?
There's this guy on YTube that, did that method
KEYWORD: How to unbrick Any dead mtk phone 100% tested solution
I can't upload the video..
Also, what is the BEST METHOD to flash the ROM using Windows 7?
I managed to borrow a laptop with WINDOWS 7 32Bit OS installed.
*Should I flash the preloader again?
*Should I untick/deselect it (preloader) and ALWAYS flash other stuff? except CACHE & USERDATA?
* I flashed countless times, I just don't want to make things worse..
**Is it possible to install or flash my rom to EXTERNAL SD? and be able to boot my phone using it? There's this guy on Ytube did that to his dead phone and it booted..
He used, some sort of image file and installed it in sd card using wind32diskimager..
Is it possbile? or for some phone models only?
https://forum.xda-developers.com/yu-yuphoria/help/how-to-fixing-hardbricked-yuphoria-t3330604
Thanks and have a nice day..
Click to expand...
Click to collapse
Same problem with me, I also have an MT6580 device and I also first tried to:
(when I used SP Flash tool, it only fully worked in version SP_Flash_Tool_v5.1532_Win )
1) format the whole flash (in SP Flash tool)
2) only select preloader
3) flash (with Download selected, and phone volume + button pressed in and then connected USB to pc)
4) select all other (recovery, boot, system, ...)
5) flash
For me as well, nothing happened - the phone does not react when I try charging it, and pressing the power button has no effect.
The only advice I can give you is the knowledge that the preloader is in the fault - somehow the preloader on my phone before the flashing was different from the preloader in my stock rom. Perhaps it is the same data, but the address at which it is flashed is wrong. Don't bother yet with flashing the system, userdata or other images - if the preloader is not correctly installed, the phone won't recognize it when it tries to boot up, and the other system, recovery etc. images are useless.
Perhaps a good analogy is: say the preloader is the bios of a computer: if the bios fails to be loaded, then the operating system (android, windows etc - i.e. the system, recovery etc. images) will never be loaded either
limereyes said:
Thanks for the reply..
1. I just wanna ask, do you have any idea or IS IT POSSIBLE? to format my device using the
ADVANCE OPTION + PHYSICAL FORMAT FORCEDLY ERASE (BAD BLOCK MARK IS ERASED) in SPFT?
I see that option in new-latest version of SPFT but, WHENEVER my ROM were already loaded (MTK6580), that option is gone.
I GOOGLED it but I can't seem to find the right keyword for it.. Do you have any idea? even in other android tool?
There's this guy on YTube that, did that method
KEYWORD: How to unbrick Any dead mtk phone 100% tested solution
I can't upload the video..
Also, what is the BEST METHOD to flash the ROM using Windows 7?
I managed to borrow a laptop with WINDOWS 7 32Bit OS installed.
*Should I flash the preloader again?
*Should I untick/deselect it (preloader) and ALWAYS flash other stuff? except CACHE & USERDATA?
* I flashed countless times, I just don't want to make things worse..
**Is it possible to install or flash my rom to EXTERNAL SD? and be able to boot my phone using it? There's this guy on Ytube did that to his dead phone and it booted..
He used, some sort of image file and installed it in sd card using wind32diskimager..
Is it possbile? or for some phone models only?
https://forum.xda-developers.com/yu-yuphoria/help/how-to-fixing-hardbricked-yuphoria-t3330604
Thanks and have a nice day..
Click to expand...
Click to collapse
Sir please help me out
I have Micromax a120 device. Few days back it got bricked it stuck on bootloop and not working even after factory reset moreover my pc is not recognizing mobile and display message as device descriptor request failed. I have installed all drivers
Hello!
I have tried to upgraded my phone to Lineage 18.1 but it did not work.
This is what I did so far:
1) Installed the NEWEST TWRP and unfortunately I have deleted the OS. After that, the USB connection worked fine and I was able to see all files on my phone.
2) I've found a stock recovery.img that I have used and then the problem started. After installing that recovery.img file now I have TWRP (older version) 2.7.0.0 and:
a) when connected through USB , my computer does make sound, but it does NOT recognize my phone any more. Yes, I do have the newest USB drivers installed
b) when connected through USB and when I run this command: fastboot devices, then it DOES shows my device number, but it DOES NOT any devices using adb command.
c) when booting into fastboot, the phone shows just the black screen with the android faded icon.
d) I can boot into TWRP but there is no system or recovery files in there and it look like it's just useless.
I'm not sure what to do next. It looks like the phone is soft-bricked.
Any help will be appreciated.
Thank you
the first thing i would try is flashing twrp 3.6 (the newest) using fastboot. not sure why you would flash an old recovery version. if data recovery is not an issue then the opo is even fixable after a hardbrick (i used to have it). i used the color os method but that was ages ago. now there is a slightly easier way somewhere here on xda if you want the opo to in out of the box condition.
maybe try the whole thing using a secondary old laptop (if possible) or a virtual machine. otherwise i have no idea. sounds like a lot of trial and error might be needed. good luck.