One plus 8 US tmobile model IN2017
Software version: 11.0.1.1.
Following this guide to root
I have successfully unlocked my bootloader but now need the Mag file, but the website he links for the file doesn't have my version. Can anyone help me locating one ?
Hey man if you managed to unlock your bootloader already you can follow my guide to get root on Android 11. https://forum.xda-developers.com/t/guide-root-magisk-for-android-11-oos11-t-mobile.4229305/
It doesn't require a patched magisk image so it's a little simpler.
Hi Community.
Is possibile to root stock firmware v30c?
Android 10 Q
Brand TIM (Italy)
I found on xda a list of patched boot.img but outdated (v20x)
My last experience on rooting/custom rom flashing was about 3 years ago with Samsung Note 3 and odin software; these "new" procedures are harder for my understanding.
Thank you for your attention
have you unlocked bootloader ?
I used this method. My firmware is Open EU 30f.
[ROOT][MAGISK][OREO/PIE] Magisk 18.0+
Magisk 18.0+ for the LG G7 ThinQ This is a collection of Magisk pre-patched/pre-rooted Boot images i made for the LG G7 ThinQ European model (G710EM). This thread will also guide you how to If you happened to have a G7 ThinQ (G710EM) or any...
forum.xda-developers.com
Emanel000000 said:
have you unlocked bootloader ?
Click to expand...
Click to collapse
Hi Emanuel,
Yes I have, Thank you
clitheroe1 said:
I used this method. My firmware is Open EU 30f.
[ROOT][MAGISK][OREO/PIE] Magisk 18.0+
Magisk 18.0+ for the LG G7 ThinQ This is a collection of Magisk pre-patched/pre-rooted Boot images i made for the LG G7 ThinQ European model (G710EM). This thread will also guide you how to If you happened to have a G7 ThinQ (G710EM) or any...
forum.xda-developers.com
Click to expand...
Click to collapse
Hi clitheroe1,
Thank you very much.
I'll try it soon.
I flashed an Open EU stock rom (v30b) last summer because TIM is so much slow with updates, but I don't want to see imei/firmware error message on boot anymore.
spqromanni said:
Hi Emanuel,
Yes I have, Thank you
Click to expand...
Click to collapse
1. Install magisk manager
2. Boot into 9008 mode
3. Backup your boot_a image using Qfil (Read data)
4. Copy it to your phone
5. Rename it to boot_a.img
6. Go in magisk manager —-> install —-> Select and patch an image —-> select the image.
7. Copy the patched boot image file to your PC (its located in downloads folder in your phone)
8. Flash it with fastboot/qfil ( fastboot flash boot_a < drag and drop over the cmd the image > // select boot_a and load image in qfil)
Anyone have a root method for the BLU V50? Thanks in advance
Look inside here:
Root Spreadtrum Devices via Magisk Patched boot.img
This guide will show you the steps to root your Spreadtrum device via Magisk patched boot.img file, which we will extract from PAC firmware.
www.droidwin.com
jwoegerbauer said:
Look inside here:
Root Spreadtrum Devices via Magisk Patched boot.img
This guide will show you the steps to root your Spreadtrum device via Magisk patched boot.img file, which we will extract from PAC firmware.
www.droidwin.com
Click to expand...
Click to collapse
jwoegerbauer said:
Look inside here:
Root Spreadtrum Devices via Magisk Patched boot.img
This guide will show you the steps to root your Spreadtrum device via Magisk patched boot.img file, which we will extract from PAC firmware.
www.droidwin.com
Click to expand...
Click to collapse
I managed to find a way. Lol I'm just going to have to squeeze the old brain to to get this done it looks like. Thanks for the tip. The methods provided all require a system dump of stock firmware to patch TWRP for the phones recovery partition. I may have to cross my fingers and flash the generic unofficial boot image TWRP for android 10 and hope it fits lol. There are absolutely no custom fits at the moment. Of course I accepted the security patch update which made this a bit more tricky. QP1A.190711.020. I found a thread talking about almost the same update except it was two digits more than the version I got. It's been 6 or 7 years since I stopped theming for the galaxy s3. Course I was only changing xmls and pngs for custom roms back then. None of my old team are active anymore. Team Venum and team nOObz are long history. I even lost my log in info for my old profile. Anyways. Wish me luck. I'm going to learn how to port and develope this time around.
jwoegerbauer said:
Look inside here:
Root Spreadtrum Devices via Magisk Patched boot.img
This guide will show you the steps to root your Spreadtrum device via Magisk patched boot.img file, which we will extract from PAC firmware.
www.droidwin.com
Click to expand...
Click to collapse
Hello. Thanks again in advance. I've tried several command prompt methods to unlock this boot loader with no luck including the Magisk method. I have however managed to patch the TWRP file.
jwoegerbauer said:
Look inside here:
Root Spreadtrum Devices via Magisk Patched boot.img
This guide will show you the steps to root your Spreadtrum device via Magisk patched boot.img file, which we will extract from PAC firmware.
www.droidwin.com
Click to expand...
Click to collapse
I managed to patch the TWRP boot image using the Magisk apk and patch tools but I have no luck unlocking the boot loader..
1. find your firmware file by searching this forum for blu stock firmware repository
2. extract your boot/recovery img file using spd flash tool
3. patch img file with magisk, re-sign it with avbtools
4. patch vbmeta file with avbtools
5. re-flash both vbmeta and boot/recovery using spd research tool
rooted my blu advance l5 with these steps learned from hovatek. ymmv
luridphantom said:
1. find your firmware file by searching this forum for blu stock firmware repository
2. extract your boot/recovery img file using spd flash tool
3. patch img file with magisk, re-sign it with avbtools
4. patch vbmeta file with avbtools
5. re-flash both vbmeta and boot/recovery using spd research tool
rooted my blu advance l5 with these steps learned from hovatek. ymmv
Click to expand...
Click to collapse
Can anyone quickly tell me the easiest way to brick this device? My wife will buy me a new phone "when this one stops working"
Did anyone manage to root this device without bricking it? Firmware is not available in the Blu Repo (at least not yet). Our team would love to find a workable method for this phone. We have access to a bunch and want to be able to run Linux Deploy on them and also write app to automatically reboot the phone if the network connectivity is loss.
Hey, I was able to figure out how to deal with this bootloader stuff after many hours of work
Give this thread a look, it pretty much details every step needed to unlock the bootloader: https://forum.hovatek.com/thread-32287.html
Keep in mind that the OP of that thread is using a way older version of fastboot. For me, r26.0.1 worked best:
Windows: https://dl.google.com/android/repository/platform-tools_r26.0.1-windows.zip
Mac: https://dl.google.com/android/repository/platform-tools_r26.0.1-darwin.zip
Linux: https://dl.google.com/android/repository/platform-tools_r26.0.1-linux.zip
The above step is essential as newer versions of fastboot do NOT have the "fastboot flashing unlock_bootloader <bin>" step
again YMMV, but good luck
Me again, 6 hrs after the fact
Trial and Error enabled root on the V50 - follow these steps
1. Unlock bootloader as above
2. Create a custom signed vbmeta https://forum.hovatek.com/thread-32664.html (I used the same .pem from https://forum.hovatek.com/thread-32287.html to do this) - Make sure the VBMETA IS ANDROID 10 despite G0350WW firmware saying it's Android 9
3. Create custom boot with magisk (plenty of instructions to do this online, go with the github instructions)
4. Sign the custom magisk boot with THE SAME PUB KEY FROM STEP 2
5. Flash your new vbmeta and boot onto your phone via fastboot
6. Reboot, hope and pray it turns on
This is what worked for me, but again YMMV.
njoaquin said:
Me again, 6 hrs after the fact
Trial and Error enabled root on the V50 - follow these steps
1. Unlock bootloader as above
2. Create a custom signed vbmeta https://forum.hovatek.com/thread-32664.html (I used the same .pem from https://forum.hovatek.com/thread-32287.html to do this) - Make sure the VBMETA IS ANDROID 10 despite G0350WW firmware saying it's Android 9
3. Create custom boot with magisk (plenty of instructions to do this online, go with the github instructions)
4. Sign the custom magisk boot with THE SAME PUB KEY FROM STEP 2
5. Flash your new vbmeta and boot onto your phone via fastboot
6. Reboot, hope and pray it turns on
This is what worked for me, but again YMMV.
Click to expand...
Click to collapse
to be clear, the v50 uses the same firmware as the g50 plus?
dtingley11222 said:
to be clear, the v50 uses the same firmware as the g50 plus?
Click to expand...
Click to collapse
Correct, you can see it when you go to the firmware details of the v50 itself. You can get the firmware files when you search this forum for blu stock firmware repository
V50 is essentially a re-wrapped g50
njoaquin said:
Correct, you can see it when you go to the firmware details of the v50 itself. You can get the firmware files when you search this forum for blu stock firmware repository
V50 is essentially a re-wrapped g50
Click to expand...
Click to collapse
Hey, is there any way you could get me a rooted image and signed vbmeta? I have all the information that you would need, I just can't do the steps because im stupid. I would pay you to do it if you wanted
If the BLU V50 uses the same stock rom as the blu g50, if someone were to give out their patched vb meta and boot img, wouldn't it work for anyones BLU V50 if they just flashed it?
dtingley11222 said:
If the BLU V50 uses the same stock rom as the blu g50, if someone were to give out their patched vb meta and boot img, wouldn't it work for anyones BLU V50 if they just flashed it?
Click to expand...
Click to collapse
you need to patch recovery flash it back using the spreadtrum research tool and use the key combo to boot into root
luridphantom said:
you need to patch recovery flash it back using the spreadtrum research tool and use the key combo to boot into root
Click to expand...
Click to collapse
If I unlock the Bootloader, could I just flash it back with Fastboot?
Just tried flashing recovery and it bricked my phone
dtingley11222 said:
If I unlock the Bootloader, could I just flash it back with Fastboot?
Click to expand...
Click to collapse
you cant unlock the bootloader. follow this tutorial or you'll keep bricking your v50
How to create a custom signed vbmeta.img for Unisoc using AVBtool
If you're into rooting and flashing custom recoveries then Android Verified Boot (AVB) or dmverity is something you should be aware of. We'd dropped a blog post on why dmverity could be causing your p
forum.hovatek.com
luridphantom said:
you cant unlock the bootloader. follow this tutorial or you'll keep bricking your v50
How to create a custom signed vbmeta.img for Unisoc using AVBtool
If you're into rooting and flashing custom recoveries then Android Verified Boot (AVB) or dmverity is something you should be aware of. We'd dropped a blog post on why dmverity could be causing your p
forum.hovatek.com
Click to expand...
Click to collapse
Actually you can unlock the Bootloader. I already did. I don't know how to follow that tutorial. If I gave you my boot and vbmeta could you do it for me?
https://drive.google.com/file/d/1q1vt6f6-0Wg6iF4prOJS2o9ZauWM4qNy/view?usp=sharing : vbmeta
https://drive.google.com/file/d/1gEV2jxhnmmjKuUaqVhqPnH9oZNmzZBGi/view?usp=sharing : boot
dtingley11222 said:
Actually you can unlock the Bootloader. I already did. I don't know how to follow that tutorial. If I gave you my boot and vbmeta could you do it for me?
Click to expand...
Click to collapse
oh weird i thought blu doesnt even support bootloader unlocking
can you access fastboot? with an unlocked bootloader you can flash an empty vbmeta and dont have to go through the above steps
Hello to alee, I wanted to ask if there is also a root for the LG Velvet in the 4G version (GM910)? I think there is a root for the Velvet 5G (GM900)! But is there also one for the Velvet 4G? I would be very happy about help! Friendly greetings to everyone.
Jensens2004 said:
Hello to alee, I wanted to ask if there is also a root for the LG Velvet in the 4G version (GM910)? I think there is a root for the Velvet 5G (GM900)! But is there also one for the Velvet 4G? I would be very happy about help! Friendly greetings to everyone.
Click to expand...
Click to collapse
Sorry late reply, The only way to root as far is to unlock the bootloader (European market ONLY) go to the LG developer website for LG Velvet bootloader unlock HERE OR HERE if link does not work.
As there is no TWRP for LG Velvet 4G as of now you'll need to download LGs Velvet 4G firmware for your model and region to flash boot.img/recovery.img with MAGISK. But LG firmware is in .kdb format not .zip the only method i know that works is to download kdztools AND use Python WITH zstandard package installed.
CMD to the kdztools directory and follow the guide in either GitHub/readme.txt that comes with kdztools use help commands and you'll be able to extract boot.img/recovery.img ONLY patch/flash 1/2 prefer to use boot.img if magisk shows you have ramdisk on your device patch it with magisk and flash it in fastboot follow Magisk install guide and DONE you're now rooted!
Only works for Europe cause bootloader, sad for anyone else, sorry!
As said in the title, I can't start my v50 in fastboot, the command 'adb reboot bootloader' reboots the phone but it just goes to android. i'm using the latest korean firmware. Has anyone had this issue before?
There is no way to reach fastboot mode on LG V50 Korean version. You need abl_a eng file to do that. Follow this link:
Guide LG G8/G8x/v50 Bootloader Unlock and Magisk Root using Firehose
Disclaimer: I am not responsible for any problems from using this guide. Works for G8, G8s, G8x, and v50 Confirmed working on G8 and v50 Requirements: Android 10 QFIL...
forum.xda-developers.com
sptw said:
There is no way to reach fastboot mode on LG V50 Korean version. You need abl_a eng file to do that. Follow this link:
Guide LG G8/G8x/v50 Bootloader Unlock and Magisk Root using Firehose
Disclaimer: I am not responsible for any problems from using this guide. Works for G8, G8s, G8x, and v50 Confirmed working on G8 and v50 Requirements: Android 10 QFIL...
forum.xda-developers.com
Click to expand...
Click to collapse
Thanks ! this is exactly what I needed. I'm going to try to install twrp recovery now
gambon0120 said:
Thanks ! this is exactly what I needed. I'm going to try to install twrp recovery now
Click to expand...
Click to collapse
The best way to install TWRP on V50 Korean version is using Magisk.
Follow this thread :
[UNOFFICIAL][TWRP][Recovery] TWRP 3.3.1-0
1 . unlock BootLoader AND Root https://forum.xda-developers.com/v50-thinq/development/lg-v50-temp-root-exploit-via-cve-2020-t4098077 2. Download the required files ( twrp-installer-v3.3.1-V50_ab.zip ) 3.Install the corresponding TWRP flash...
forum.xda-developers.com
Remember : in this thread pay attention on iten #4, otherwise you are going to stuck with blocked twrp. See the video to learn the trick.
sptw said:
The best way to install TWRP on V50 Korean version is using Magisk.
Follow this thread :
[UNOFFICIAL][TWRP][Recovery] TWRP 3.3.1-0
1 . unlock BootLoader AND Root https://forum.xda-developers.com/v50-thinq/development/lg-v50-temp-root-exploit-via-cve-2020-t4098077 2. Download the required files ( twrp-installer-v3.3.1-V50_ab.zip ) 3.Install the corresponding TWRP flash...
forum.xda-developers.com
Remember : in this thread pay attention on iten #4, otherwise you are going to stuck with blocked twrp. See the video to learn the trick.
Click to expand...
Click to collapse
What does he mean by 'Re-swipe the Magisk 20.4 card package'?
gambon0120 said:
What does he mean by 'Re-swipe the Magisk 20.4 card package'?
Click to expand...
Click to collapse
Install again.
sptw said:
Install again.
Click to expand...
Click to collapse
Got it! Twrp is running and I was able to flash lineage OS! Perfect =)
Thanks for all the help, I'm not sure I could have done it without your help. By the way, do you happen to know a good version of gcam for the v50?
gambon0120 said:
Got it! Twrp is running and I was able to flash lineage OS! Perfect =)
Thanks for all the help, I'm not sure I could have done it without your help. By the way, do you happen to know a good version of gcam for the v50?
Click to expand...
Click to collapse
Sorry not to help you on it. I use stock camera. Join to the LG V50 - G8 Thinq - G8S Think group on telegram. There are a lot of information about gcam there. People are very friendly there.
Hi Guys, i can put my device Lg v50 in edl mode with adb? Or Lock bootloader ? My phone not entry in edl mode. I receive every time that my phone restart "your device software cannot be checked for a corruption. Lock Theo bootloader" and i use The phone for seconds and The phone restart