Phone showing Qualcomm CrashDump Mode even after fastboot mode - OnePlus 6 Questions & Answers

Hello folks, new to this forum with a problem
i have a 2 year old oneplus 6, was listening to some songs and the phone just went blank. It showed the Qualcomm Crash Dump Mode on the screen and stays until i press volume up+down+power button.
Then i get the fastboot mode and when i click start, it takes back to the Qualcomm Crash Dump Mode. Can someone help, have never unlocked bootloader or flashed any kind of custom rams.

u can flash it via MSMtool no need to unlock bootloader
Tutorials also available in utube

Related

Google pixel not going to fastboot

Dear friend,
I am doing customized build for google pixel for following version: N2G47J android-7.1.2_r5 Nougat Pixel
During customization i had commented/removed all bluetooth related(i.e sepolicies, boarconfigs, etc....) . During building process some errors occurred because of wrong references of bluetooth. I had successfully resolved all error and made successful build.
Finally i had successfully flashed my customized aosp images. After flashing device started booting
1) Never going to home screen( Device stuck at android animated logo)
2) Device never going to fastboot mode( Used hard keys to go fastboot mode)
3) Device no detecting through adb command(i.e since device got stuck at booting , no rsa key verification)
Please guide how to go fastboot mode or recovery mode
Thanks & Regards
D M Vamsi
while the phone is on, press and hold power and volume down, until the screen goes black. let go of power and hold volume down until the phone comes on in fastboot mode. If you cannot reach fastboot mode, I don't believe you can restore the phone without more advanced tools.

Zenfone 2 ZE550ML Bootload unlock problem

Hi to all, yesterday night probably i did some mistake trying to unlocking the bootloader for my asus zenfone 2 (ZE550ML)
I installed the driver and able debugging usb mode ecc...
i used the bootloader unlocker kit by kapil tapsi, i connected the device and entered on fastboot, i selected agree (for start the process of unlock) but idk something gone wrong, and now if i try to go on fastboot or recovery or everything u can do pressing Power + volume up i got stuck on asus logo screen, and ther's no way to get out, if not restart the device pressing power bottom.
if i don't try to enter in fastboot mode the device start correctly, but i have to dowgrade it and then upgrade to android 6 with patch security (ferbary 2017 or before).
Can someone try to help me?

【HELP!】QUALCOMM Clash Dump Mode and Boot-loader is Locked !

Hi Guyz
I had a working One Plus 6 , never flashed anything nor root it . My boot-loader is still locked.
One day while lying on table it got hanged and became unresponsive when I restarted it with power key , first it took a while to start and then
ended up with screen saying 'QUALCOMM Clash Dump Mode '
I don't mind erasing or losing data , so I went into Fastboot Mode and tried to enter recovery mode from there but it didn't worked (Seems like I don't have any recovery)
Next I installed the drivers and android sdk on my system and connected my device through Fastboot . But when I try to erase data or flash any image it didn't work because my boot-loader is in locked state.
I simply want to erase everything and sent my device to OnePlus since its in warranty . (And I may get new phone )
Thanks in Advance.
just use unbrick tool, it will reflash to stock OOS.
Use this ;
https://forum.xda-developers.com/oneplus-6/how-to/tool-msmdownloadtool-v4-0-international-t3798892
- Start the soft
- turn off your phone
- hold the up volume for 5 sec and plug the phone to your pc
- you should now see the on status "connected"
- click start and let the soft finish, your phone should start again

Bootloop, Mi logo doesnt even show up

I've tried to install new system in my Xiaomi Redmi Note 4 MTK.
From the system that I downloaded (I downloaded the correct version) I picked in TWRP to install from boot.img.
Unfortunately the system didnt boot but I could still enter recovery or fastboot.
Then I chose preloader.img and clicked reboot because I thought that at the worst case I'd jsut enter fastboot and fix it.
After this the screen doesnt lit up at all.
The only response is the vibration.
It keeps rebooting over and over again.
Is there any way to save it?
It seems to stop bootlooping when I hold all the buttons at once for a while but when I hold the power button the bootloop starts again.
Re-flash Stock ROM
Is it possible in my situation when I can't access recovery and fastboot?
Can you please tell how can I do that?
Have you tried: With phone off, hold volume up, and insert usb cable. This should turn the phone on and go into download mode or something like that.
TouchOdeath said:
Have you tried: With phone off, hold volume up, and insert usb cable. This should turn the phone on and go into download mode or something like that.
Click to expand...
Click to collapse
I believe its called the fastboot mode and as I said I unfortunately can't go there :/
Yes, we are talking about Mi logo stuck problem during boot. ... OR mobile goes in bootloop where every time shows Mi logo on the screen and shut House Cleaning Services Dubai
While installing your stock rom for your mediatek phone using sp flash tool just click the format all + downlaod option. This may blank out your imei and personal phone specific info
guys plz, you're talking like if I had any access to my phone.
I think I wrote it quite clearly that the only response that I get are vibrations and I dont see Mi logo. It's on for like a split second. Can't go to fastboot or recovery.
I talked about it with a guy on discord and it's loading preloader before boot that should go first so it can't be helped without valid tools. Makes sense to me, already bought a new phone.

(Solved) Oneplus 8T Qualcomm logo blinking

Hi!
I have tried to install a custom rom, but there was an error. When I tried to boot back to bootloader mode, the qualcomm logo started blinking and the device is vibrating.
Tried to connect to pc, but I don't see any device in COM Ports in the device manager, also MSM tools says waiting for the device.
If I connect the cable while I am pressing the both volume button, I hear the sound from the pc that something is connected, but after a few seconds the device disconnects.
Can you help me?
Got the same problem installing a wrong firmware, probably. I'm hoping for someone knowing how to solve...
That was easy. Unfortunately I had to format the phone entirely (MSMTool), but it's back with the living.
Install Qualcomm EDL drivers
Download an MSMTool release for OnePlus 8T
Enter in EDL Mode. With the phone connected to a computer running Windows, press volUp + volDown right when you see the Snapdragon logo. The phone will stay with screen off
Follow the usual flashing procedure with MSMTool
Thanks, I just had to install the Qualcomm drivers exe file. After that it appeared in device manager.
Livingsilver94 said:
3. Enter in EDL Mode. With the phone connected to a computer running Windows, press volUp + volDown right when you see the Snapdragon logo. The phone will stay with screen off
Click to expand...
Click to collapse
Nothing happens when i press that. phone keeps on vibrating and flashing the logo
UPDATE: Got a different computer and it worked

Categories

Resources