Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I was tired of pressing the power button whenever I need my phone for a second. Thus I created the Gravity Screen Off app which can turn automatically the screen ON when I grab my phone and turn it OFF when I put it into my pocket or onto a table. Basically, no need to touch any button and you are ready to go.
HOW IT WORKS:
The app turns the screen off by monitoring the orientation of the device through the gravity sensor. When your phone is pointing downward by its top, below a certain angle, it's likely to be out of use. In this situation the proximity sensor is activated to determine if it is covered. If yes, the screen turns off because probably you placed the phone into your pocket or onto a table.
The screen turns on when you lift up your phone. The phone wakes up if the proximity sensor is uncovered or if it was not covered the app is looking for movements to detect the action.
The Keep Screen On feature based on screen orientation and motion detection as well. If the device is pointing upward and small movements are detected it's probably held in hand and the screen timeout is extended.
MAIN FEATURES:
- Pocket Sensor: Recognizes if your phone is in your pocket. By turning your phone below the angle you set, it'll prepare to turn the screen off.
- Table Sensor: Detects your phone is lying on a table and turns the screen off.
- Turn Screen On by Motion: If the screen is off and it's facing up the device can be woken up by any movements (ex. lift up by hand) according to the sensitivity set.
- Keep Screen On by Motion: It's a Screebl like feature but it's relying on the small movements you are doing by your hand while holding the phone. If small motions are detected while the screen is facing up the feature keeps the screen on because it can be suspected that the phone is held and probably you are reading something. If the phone is steady the timeout will work as normal in any position you leave your device unlike in another apps.
- Turn Screen On by Proximity: Turns the screen On when you take your phone out from your pocket and Off when you put it back. By swiping your finger over the proximity sensor the phone can be woken up as well.
- Turn Screen Off by Proximity: If the device is pointing downward it takes the proximity sensor into account. By turning this off the program will rely only on the gravity sensor.
- Tasker, Llama, Locale supported by plug-in.
- 3 widgets/shortcuts: (available in Unlocked version)
(i) pause/resume
(ii) turn screen off: It's like pressing the power button
(iii) turn screen off persistently: turn screen off and keep it off until power button is pressed. It's good when you have to keep the phone in your hand or while driving and do not want the screen turned on by the app. After pressing the power button it will work as before.
- Power Toggles plug-ins
BATTERY USAGE:
You can set the app to minimize the energy consumed by the screen and by this you can extend your battery life. Or you can extend your own life by using another features of the app In the first case the battery usage should be not significant. I experienced about 7 per cent extra consumption on the test device. However it can be higher if you are activating often the Turn Screen On by Motion feature by leaving your device face up on table and you set a relatively long timeout for the feature. Read FAQ [4] for more details.
IMPORTANT
On some devices if it's lying face down the alarm clock is switched off by the app after it had gone off! Please check if it's the case for you. If, yes, use a third party app, for example: https://play.google.com/store/apps/details?id=com.vp.alarmClockPlusDock
DOWNLOAD
Gravity Screen
NOTE
Probably not all feature will work for everyone. It was tested so far mainly on Samsung devices with stock rom. If you think it does not work for you, please read the FAQs below or report your issue in this thread.
REPORT YOUR ISSUE
If you have an issue, do NOT post it until you read the FAQ below and try to solve it alone by trying different settings for some hours. If still no solution, please write all your settings in your question otherwise your question will be ignored. If you feel you have a battery drain, do not post it in this thread. We are not speaking about it anymore
VERSIONS: FREE vs. UNLOCKED by IN-APP PURCHASE
In the Unlocked version, there is no 15 minutes limit for turning the screen on by motion and the Table sensor can be set more precisely, plus it has an Exclude App list, a more advanced Delayed lock option and Widgets.
CREDIT
Thanks to @remidesroques and everyone who helped and keep helping the development by testing the beta versions, sending feed backs or any another way supporting this app.
Translations:
Spanish: Johandri Silva and Eduardo Iñiguez
Russian: Gljadkov Oleg
French: @gregland
Italian: @DesmoDavid
Czech: Jaroslav Vrána
Portuguese (Brazilian): Irwing Junqueira Braga
Change log:
- - v2.4.1 - -
Added: Android M support
Fix: Power button support issue when screen turned off during lock screen
Fix: small issues
- - v1.80.1 - -
Added:
- 3 widgets: (available in Unlocked version)
(i) pause/resume
(ii) turn screen off: It's like pressing the power button
(iii) turn screen off persistently: turn screen off and keep it off until power button is pressed. It's good when you have to keep the phone in your hand or while driving and do not want the screen turned on by the app. After pressing the power button it will work as before.
- Power Toggles plug-ins
- Translation: Traditional Chinese, Turkish
- - - v1.78.2 - -
Fix:
- works on LG P880
Added:
- Languages: Arabic, Chinese, Dutch, Hungarian. Thank you for the translations.
- Car dock detection
APKs:
Gravity Screen - FAQ
Hi,
thanks for your feedback.
[1] Q: The screen not always turns off when I put my phone into my pocket, why?
A: The proximity sensor not always accurate. It can fail recognizing some materials specially if they are very close to it. If it happen occasionally, probably it's still worth to use the sensor. But even you can eliminate the accidental turning on by selecting the False Turn On Protection in Pocket option.
[2] Q: The Table Sensor not really works for me when I place my phone onto a table face down, why?
A: This issue is quite common. The first problem is that the free version is limited to 15 degree. If you are turning your phone fast downward the proximity sensor is activated only when it's very close to the table. Many proximity sensors cannot judge distance accurate if the object is too close to it. This is the reason the screen remains on often. And even more the reliability of the sensor depends partly on the material as well. Thus if you are using the free version it's recommended to place your phone onto a table not too fast and try to keep it parallel to it. The paid version allows you to increase the angle and by this the problem is significantly reduced. Moreover, the problem can be reduced by selecting the False Turn On Protection in Pocket option.
[3] Q: Why does the Lying Face Up feature turn the screen off regardless I'm tapping the screen?
A: Due to Android security restrictions a running service cannot detect if the screen was tapped. If you want to continue using the device you have to swipe over the proximity sensor to keep it on or turn it back on.
[4] Q: I'm experiencing high battery usage, why?
A: The app should use about 6 percent extra energy per day if you are not using too much the Turn Screen On by Motion feature. If you frequently lay your phone face up on a table and the Turn Screen On by Motion Timeout is too long, the battery consumption can be much higher. Because the CPU has to be constantly analyzing the data of to acceleration sensor to catch the movement when you lift up the device. Thus if you want to reduce the battery usage it's recommended to keep your phone often lying face down when it's on a table. Because in this situation the proximity sensor is responsible for turning the screen back on which uses much less energy. Moreover, please, keep in mind that the android en-built battery consumption measurement can show much higher results, because it shows the battery usage relatively to another apps. If the phone was not in use or the measurement period was short, it looks like my app uses too much energy however there was not too much energy used all together.
[5] Q: The Keep Screen On by Motion feature does not work for me, why?
A: It can be the result of battery saving processes on your device. Ask for support from the app in this case.
[6] Q: Turn Screen On by Motion feature does not work for me, why?
A: It can be the timeout of the feature is expired, in this case you have to increase it within the app. Or it can be caused by battery saving methods by killing the service of the app. In this case you have to turn off battery saving methods of your device. Please visit: https://dontkillmyapp.com/
[7] Q: The screen turns off in landscape mode, why?
A: This issue has many different solutions. You can make the Pocket Sensor Angle smaller or if you have the Any Direction feature ticket, you can pause the GS app temporally. There are ways to pause it: 1. tick the Landscape mode feature; 2. using the Locale plug-in by Tasker or Llama; 3. using the Menu - Exclude apps option.
[8] Q: It gives me a huuuge wakelok, why?
A: The wakelock is necessary for the "Turn Screen On by Motion" feature but if you turn the screen off through the proximity sensor (i.e. put it into your pocket or place face down onto a table) there won't be wakelock held. So if you want to reduce the wakelock try to keep your phone face down. Moreover, you can limit it by the Timeout scrollbar as well but this means you will loose the feature after the timeout you set.
[9] Q: I'm prompted to type my pass code immediately after screen turns on.
A: You have to enable the Fingerprint, Smart Lock Support option in the app.
[10] Q: It makes a buzzing sound when listening to music and stuff. Can you turn it off?
A: Due to a hardware problem the proximity sensor is causing the buzzing noise on Nexus 4 when it's active.
At the moment I can recommend some changes in the settings. If you turn on the Headset support and connect your headphone, you are able to turn off the "Turn Screen Off by Proximity" and "Turn Screen On by Proximity" features independently from the state when headphone is not connected. The app will remember this and always turn off the proximity sensor when headphone is connected.
[12] Q: Will you add an option to scheduled the app to stop it for night hours?
A: Not really. Please, use the Locale plug-in in Tasker or Llama;
[13] Q: Why my alarm clock does not work?
A: Unfortunately many alarm clocks cancel the alarm when the screen turns off. It can happen if you leave your phone face down at night and my app turns the screen back off when the alarm goes off. The app is trying to detect the alarm event and pause itself, but it's not possible with all alarm clock apps. Thus it's strongly recommended to test your alarm clock with this app.
You can solve this problem by using a well written alarm clock, for example: https://play.google.com/store/apps/details?id=com.amdroidalarmclock.amdroid, https://play.google.com/store/apps/details?id=com.vp.alarmClockPlusDock,
https://play.google.com/store/apps/details?id=ch.bitspin.timely, https://play.google.com/store/apps/details?id=com.amdroidalarmclock.amdroid, https://play.google.com/store/apps/details?id=com.alarmclock.xtreme.free.
[14] Q: The screen turns on during driving. How to avoid it?
A: The simplest method is to pause the app before driving. There are different widgets in the app for this. Or if you are driving often you can use the Power button support feature A more advanced method can be to pause the app when the phone is connected to the car by bluetooth and resumed when disconnected. You can do this by Llama via the Locale plug-in.
[15] Q: The notification not responding/disappearing when I try to pause/resume the app from the notification area, why?
A: Please try to un-tick the NOTIFICATION -> LOW PRIORITY option in the app. It should solve the problem.
[16] Q: What are the shortcuts/ widgets for:
A:
(i) pause/resume
(ii) off: It's like pressing the power button
(iii) persistent off: turn screen off and keep it off until power button is pressed again. It's good when the phone is moving but you do not want it to turn on.
(iv) lock: turns off the screen and locks it. Useful if delayed lock is in use but you want to lock the device manually.
[17] Q: Where is the Pro version? I cannot find it on Play Store.
A: The Pro version is discontinued unfortunately, due to security reasons.
To change to the Unlocked version, please, do the following:
- send me the purchase number of the Pro and I'll send you a promotional code which you can use to unlock the free version
[18] Q: In-App Purchase fails. Why?
A: It's a Play Store app issue probably which happening on some devices.
Please make sure you are connected and restart the device. Other method can be to uninstall the Play Store updates and try with an older version of the Play Store app. It often helps.
[19] Q: I bought the app by IAP but it's still locked. Why?
A: It's a Play Store app issue probably which happening on some devices when not connected to the internet.
Please make sure you are connected and restart the device. Moreover, do you have more than one Google account registered on your device? That can cause the issue too, that you bought the app under a different account. Other method can be to uninstall the Play Store updates and try with an older version of the Play Store app. It often helps.
[20] Q: After some time the phone does not wake up. Why?
A: I'd check any kind of battery saving methods your device may use currently. Probably that disables the sensor after some time.
Moreover, make sure that the Turn screen on by motion timeout is set properly. Please visit: https://dontkillmyapp.com/
[20] Q: I cannot uninstall it. Why?
A: You have to press the uninstall button in the app, not in Play Store or in Android settings. If still no luck reboot your device and try again .
[21] Q: The POWER BUTTON SUPPORT option does not work for me. Why?
A: You have to change the screen timeout from AUTO to another value in Android settings and do a reboot.
[22] Q: The fingerprint sensor does not work, instead I have to type my pin every time. Why?
A: This is an Android thing, for developers the Smart lock features are not supported. That's why we have to use workarounds.
Using the FINGERPRINT UNLOCK, SMART LOCK SUPPORT option should solve the issue but you may have to wait about 5-10 seconds for the complete turning off with the Timeout method.
The Accessibility method is recommended to choose above Android 8.
Root your device to make this workaround perfect. In this case the turning off will be instantaneous.
[23] Q: Why does the screen only turns black but not turning completely off?
A: It's because you have selected the Timeout method of the SMART LOCK SUPPORT option and your device is not rooted. This is an Android thing, for developers the Smart lock features are not supported. That's why we have to use workarounds. Using the SMART LOCK SUPPORT option you have to wait about 5-10 seconds for the complete turning off.
Root your device to make this workaround perfect. In this case the turning off will be instantaneous.
[24] Q: The app is paused when I got a notification from an app which is on the Exclude Apps list. Why?
A: To avoid this issue, you have to grant the app an extra permission in Settings - Notifications - Notification Access
[25] Q: Why the screen timeout is changed by the app?
A: The Keep Screen On by Motion feature extends the timeout always an extra amount of time to keep the screen on when motion is detected. The timeout resets when the screen is turned off.
This method is used only for Xiaomi and Samsung devices above Android Pie.
[26] Q: The app stops working on MIUI (xiaomi redmi) after some minutes. Why?
A: To solve the issue please visit: https://dontkillmyapp.com/
[27] Q: The Turn Screen On features does not work on Samsung S8 or S8+. Why?
A: Luckily there is a very easy and quick fix! You just have to go to the edge light settings on your phone and there you can select which apps are affected by the edge light. So if you turn it off Gravity Screen in this list the notification of the app will get handled by android again, not Samsung's system. So this means that it will turn on the screen again!
Here is a video made to show the bug and how to fix it: https://youtu.be/WSSKvMrx7X0 (Thanks for finding the solution: Kitt3120)
[28] Q: The app stops working on Nokia Oreo. Why?
A: Because of a bug in the power saving method of Nokia devices, background processes are closed even if they are protected.
To overcome this issue you have to do the followings:
In Settings/Apps => Show system apps - deactivate these two packages:
- com.evenwell.powersaving.g3
- com.evenwell.powersaving.g3.overlay.base.s600ww
Please visit: https://dontkillmyapp.com/
[29] Q: The app stops working on Huawei EMUI 8. Why?
A: Because of a bug in the power saving method of Huawei devices, background processes are closed even if they are protected.
To make the app work on EMUI 8 you have to do the following:
Settings --> Battery --> Launch. Find GS there, click on it, open every option (which also includes "Run in background") and let it say "Manage manually".
Please visit: https://dontkillmyapp.com/
[30] Q: The app stops working on Android 9. Why?
A: Because of a bug in the power saving method, background processes are closed even if they are chosen to be not optimized.
To solve this issue you have to grant Gravity Screen access to notifications in: Menu - Permission Control
Please visit: https://dontkillmyapp.com/
TROUBLESHOOT
- make sure the app is installed on internal memory card; external sd cards can cause many kind of problems
- if it looks like the app stopped working correctly do an uninstall, re-install and a reboot
Interesting! Downloading and testing...
Great app, testing it now. For the proximity function, shouldn't the drain be higher because when the phone is in the pocket the proximity sensor is always on?
mliou said:
Great app, testing it now. For the proximity function, shouldn't the drain be higher because when the phone is in the pocket the proximity sensor is always on?
Click to expand...
Click to collapse
Yes, that's right. When it's turned off by proximity, there is no significant drain.
Great app :good: this is exactly what i was looking for :victory:
what benefits offers me the pro version??
Acousticbeatz said:
Great app :good: this is exactly what i was looking for :victory:
what benefits offers me the pro version??
Click to expand...
Click to collapse
You can live with the free version quite well. But by buying the paid version your life will be easier little bit:
- you can drop your phone face down onto your undone bed and your screen will turn off
- when you wake up and hardly find your phone the screen will turn on automatically at the moment you grab it and no need to find any button
Probably there are more advantages, but I could recall only these at the moment
Some feedback
1- Pocket sensor
*** gravity - can turn off but can't turn on.
*** proximity - can't even turn off
2- Table Sensor
*** gravity - can turn off but can't turn on
*** proximity - working (both face down/up and off/on)
3- Turn Screen On by Motion
*** not working for both gravity and proximity (unless swiping finger over the proximity sensor)
4- Keep Screen On by Motion
*** not working at all (even after change the sensitivity)
Request
Keep Screen On by Angle - Sometimes, i didn't hold my phone. Just put on the table in standing position. So, 0-10 degree will off the screen while higher than that will keep the screen on. No need to keep shaking
I'm on Motorola Defy CM7.2 btw. Keep your good work :good:
plexnor said:
You can live with the free version quite well. But by buying the paid version your life will be easier little bit:
- you can drop your phone face down onto your undone bed and your screen will turn off
- when you wake up and hardly find your phone the screen will turn on automatically at the moment you grab it and no need to find any button
Probably there are more advantages, but I could recall only these at the moment
Click to expand...
Click to collapse
sounds good... and already purchased
plexnor said:
Yes, that's right. When it's turned off by proximity, there is no significant drain.
Click to expand...
Click to collapse
Do you mean check the box for "Turn Screen OFF by Proximity" or uncheck the box?
its a really nice app, thank you.
one question:
if i put my galaxy nexus in the pocket, it turns off and then it turns on immediatly.
sometimes it won´t even turn off. if i rotate it in my hand and cover the brightness
sensor it will definitely turn off.
if the galaxy nexus rotates in my pocket (sometimes it is on the side) then it turns
on.
is this a bug or do i have to wrong settings.
thank you
antukubo said:
Some feedback
1- Pocket sensor
*** gravity - can turn off but can't turn on.
*** proximity - can't even turn off
2- Table Sensor
*** gravity - can turn off but can't turn on
*** proximity - working (both face down/up and off/on)
3- Turn Screen On by Motion
*** not working for both gravity and proximity (unless swiping finger over the proximity sensor)
4- Keep Screen On by Motion
*** not working at all (even after change the sensitivity)
Request
Keep Screen On by Angle - Sometimes, i didn't hold my phone. Just put on the table in standing position. So, 0-10 degree will off the screen while higher than that will keep the screen on. No need to keep shaking
I'm on Motorola Defy CM7.2 btw. Keep your good work :good:
Click to expand...
Click to collapse
For keeping screen on, try the booster option. That's the only option.
Request: Turn off some settings when it's charging as my phone is flat on a surface and it is quiet annoying when I turn phone on it has a very short display timeout (due to tablet sensor)
antukubo said:
4- Keep Screen On by Motion
*** not working at all (even after change the sensitivity)
Click to expand...
Click to collapse
mliou said:
For keeping screen on, try the booster option. That's the only option.
Click to expand...
Click to collapse
Thanks. That trick works! I wonder why i didn't try that before
antukubo said:
3- Turn Screen On by Motion
*** not working for both gravity and proximity (unless swiping finger over the proximity sensor)
Click to expand...
Click to collapse
After playing a bit more, found that it is partially working on proximity. When facing down, it works. But while facing up, it is not working. Unless i face it down again, then the screen will turn on by motion.
Now, monitoring the battery usage. Hopefully it will not drink too many juice...
Can upload apk please? Stupid play store won't allow me to install, says incompatible.
Acousticbeatz said:
sounds good... and already purchased
Click to expand...
Click to collapse
It's great, thanks
mliou said:
Do you mean check the box for "Turn Screen OFF by Proximity" or uncheck the box?
Click to expand...
Click to collapse
Yes, I mean keep the "Turn Screen OFF by Proximity" check box checked and after switch off the phone by the proximity sensor. You can do this by placing your phone face down or put it into your pocket when you want to turn the screen off. In this situations the proximity sensor will be activated and the screen will be turned off by it.
an0nym0us_ said:
Can upload apk please? Stupid play store won't allow me to install, says incompatible.
Click to expand...
Click to collapse
Hm, interesting why it doesn't allow you to install it ... I attached the file.
myhrdak said:
its a really nice app, thank you.
one question:
if i put my galaxy nexus in the pocket, it turns off and then it turns on immediatly.
sometimes it won´t even turn off. if i rotate it in my hand and cover the brightness
sensor it will definitely turn off.
if the galaxy nexus rotates in my pocket (sometimes it is on the side) then it turns
on.
is this a bug or do i have to wrong settings.
thank you
Click to expand...
Click to collapse
This is an issue with the proximity sensor. Unfortunately it looks like the sensor on your phone cannot recognize well the material of your trouser. If it happens quite often; the solution is to uncheck the "Turn screen ON by proximity" feature. In this situation when you place your phone into your pocket the screen will turn off and the proximity sensor will be inactive after. You can wake up your device by motion only after this. Downside: it costs more energy.
If the phone is often on its side in your pocket try to increase the pocket sensor angle. If it's still turning on, the only way is too keep your phone not to turn on its side or switch off the "turn screen on by motion" feature and in that case the phone will only turn off automatically which is still not too bad.
This app is so good!! I will report my experience
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Pocket Lock
Dump your power button! Pocket Lock automates locking and unlocking for you.
Download Pocket Lock on the Play Store
Featured on Lifehacker! - "Pocket Lock actually works exactly as advertised, with no fuss, and that's what makes it such a cool app to have."
Pocket Lock intelligently locks and unlocks your phone for you. Choose from three different locking modes: proximity sensor only, gravity sensor only, and a fusion of both sensors. Just drop your phone in your pocket and it locks. Take it out and it unlocks. Pocket Lock is great for phones with broken power buttons or flip cases.
Pocket Lock is easy to set-up and forget, since it starts automatically on boot, but it also offers advanced customization options. The app is completely free and has no ads. If you have any questions, comments, or concerns, use the Send feedback option in the app to email me directly.
Screenshots:
[IMGhttps://lh6.ggpht.com/rE9Bms28mQjg8CeZVcBaS3YvBtWNWzuPAUnDxQh1oi_moV6T4LLfvxq7l_E8tQStFQ=h900-rw[/IMG]
Click to expand...
Click to collapse
Features:
* Intelligently locks your phone using the proximity and gravity sensor
* Works out of the box
* Intuitive options allow for easy customization
* Keeps your phone off when in your pocket. No more pocket pictures!
* Exclude applications
* Option to only lock or unlock your phone, great for Moto X Active Display
* Disable during phone calls
* Disable when screen is rotated
Notes:
Put your phone in your pocket upside down and with screen facing you for best results.
To uninstall, use the uninstall option in the app menu.
XDA:DevDB Information
Pocket Lock, App for all devices (see above for details)
Contributors
PaeP3nguin
Version Information
Status: Stable
Current Stable Version: 2.4.8
Stable Release Date: 2017-08-20
Created 2014-08-29
Last Updated 2017-08-20
Reserved
FAQs:
Help, my phone keeps locking and I can't use it!
First, try turning your phone upside down and unlocking it. If that works, then you have an issue with your gravity sensor. If that doesn't work, them you have may an issue with your proximity sensor. Restart the phone and quickly open Pocket Lock and change the locking method to "Do not lock", then let me know!
How do I uninstall Pocket Lock?
Use the uninstall option in the Pocket Lock menu.
Why does my phone turn off when I'm using it?
This is likely because the proximity sensor is accidentally getting covered. Try setting the lock delay higher and be careful to avoid the proximity sensor with your fingers. If this still does not work, just change the lock method to not use the proximity sensor at all, which should eliminate the problem entirely.
Why doesn't Pocket Lock unlock my phone?
The Android operating system will slow down the rate of sensor events or even stop sensors when the screen is off in order to save power. While this is great for your battery life, this means that if your phone has been off for a while, Pocket Lock may not wake it up immediately. I have noticed that the proximity sensor seems less prone to this problem than the other sensors, so try covering and then uncovering the proximity sensor.
Why does Pocket Lock use so much battery?
Pocket Lock has to keep your phone's sensors on in order to lock and unlock the screen. Some sensor use more power than others, which will in turn use more battery. Check the Diagnostics page and look at the value for Proximity sensor power usage and Gravity sensor power usage. Change your lock method to only use whichever sensor has the lower value. Consider trying the accelerometer to save battery.
Why does my phone turn off in the dark?
That's your phone manufacturer cheaping out by not using a quality proximity sensor! I would suggest changing your lock method to not use the proximity sensor.
Excluded applications doesn't work!
Recent versions of Android broke the original way Pocket Lock detected what application was running. Please try out excluding at least one app before buying pro If you've bought pro and excluded apps doesn't work, forward your order confirmation to [email protected] and I'll refund you.
What if I only want Pocket Lock to lock/unlock my phone?
In the lock method setting, you can change the locking sensor or unlocking sensor to "Do not lock" or "Do not unlock"
What apps are Pocket Lock incompatible with?
Pocket Lock may not play well with apps like No Lock, SkipLock, custom lock screens, or anything that messes with the lock screen or how the phone locks. Pocket Lock should not cause problems for other apps, though, because it's nice
How can I make Pocket Lock work with delayed lock/smart lock/custom lock screens?
Enable the "Alternate screen off method" setting. Note that the screen may now take a few seconds to turn off.
Why does Pocket Lock need the permission "Device ID & call information: read phone status and identity"?
This is so that Pocket Lock can detect when you're in a call and not lock your phone.
Why does Pocket Lock need the permission to modify system settings?
This is only used if you use the Alternate screen off method. Instead of force-locking your screen, Pocket Lock simply changes your screen timeout to zero, then back to your original setting after locking.
Reserved
Privacy policy:
Pocket Lock does not store or transmit any of your data. Pocket Lock doesn't even access the internet. Pocket Lock only records one statistic: the number of times it has locked or unlocked your phone. The only way this is used is to display to you in the app.
Upcoming features:
Battery analysis: helps you customize settings to use the least amount of battery
Beta downloads:
None at the moment
Add an Active Screen based element. IE enable unlock method on notifications for a set amount of time. Also Pocket Mode (notifications turn screen on unless in the pocket). User could configure ongoing and low priority?
Last but not least: Blacklist
ahrion said:
Add an Active Screen based element. IE enable unlock method on notifications for a set amount of time. Also Pocket Mode (notifications turn screen on unless in the pocket). User could configure ongoing and low priority?
Last but not least: Blacklist
Click to expand...
Click to collapse
Thanks for the suggestions! The blacklist is definitely on the to do list, though I want to make sure the basic functionality works well before starting on that. Pocket Mode is something I hadn't thought of that I'll have to look into. Right now, the app will relock the screen if a notification turns it on, though. Active screen is a cool idea, but I'm not sure if Pocket Lock's purpose warrants adding something like that. I believe there are already pretty good apps for that and Pocket Lock plays well with them. You can set Pocket Lock to just lock the screen and then those apps can unlock when they need to.
Must enter patern after every unlock?
This app sleeps and wakes display fine. However on every wake I must enter my pattern to unlock it. Is this by design?
whomiketodd said:
This app sleeps and wakes display fine. However on every wake I must enter my pattern to unlock it. Is this by design?
Click to expand...
Click to collapse
Right now, that is how it works, yes. Eventually I will add some sort of delayed lock, like Android has naively, but for now, this most closely stimulates pushing the power button. If I just turn off the screen instead of locking the screen, Android may not enter a low power state. Thanks for using Pocket Lock!
Does this cause wakelocks to keep the screen active? How bad is it for battery life?
12gage said:
Does this cause wakelocks to keep the screen active? How bad is it for battery life?
Click to expand...
Click to collapse
Pocket Lock does not use any wakelocks when the screen is on and only very briefly uses a wake lock when unlocking the screen (probably under 100ms). The biggest concern in terms of battery life is how much power your phone's sensors use. Generally, proximity sensor use less power, so if you're worried about power usage, change your lock method to only use the proximity sensor.
You can also check how many milliamps your sensors use on the Diagnostics page in the app.
Working great mate, I will be running it to see how well it works for my uses. Previously I lost my power button on my s3, since then I have been using a gestures to lock. With the home button being my goto button, well I would hate to lose it!
Hopefully this will be battery friendly and efficient for my uses. Thanks mate!
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
kalans said:
Working great mate, I will be running it to see how well it works for my uses. Previously I lost my power button on my s3, since then I have been using a gestures to lock. With the home button being my goto button, well I would hate to lose it!
Hopefully this will be battery friendly and efficient for my uses. Thanks mate!
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
Click to expand...
Click to collapse
Hey, great to hear! If you go to the Diagnostics page in the app and tell me the values for Proximity sensor power usage and Gravity sensor power usage, I can give you an estimate of how much power the app uses and what combination of sensors will use the least power.
Just uploaded the latest update onto the Google Play Store! Let me know what features you'd like to see in the next update. Right now, I'm thinking I'll add the option to use the accelerometer instead of the gravity sensor (saves power), and the option to change the proximity sensor sampling rate.
I tried your app yesterday and while it locked the phone just as expected when I put it in my pocket it took very long (about 2 seconds) to turn on the screen when I took it out of the pocket. I changed the turn on time to very low value (20ms) but that didn't change anything. Will see what the new update brings and if that changes anything.
adl said:
I tried your app yesterday and while it locked the phone just as expected when I put it in my pocket it took very long (about 2 seconds) to turn on the screen when I took it out of the pocket. I changed the turn on time to very low value (20ms) but that didn't change anything. Will see what the new update brings and if that changes anything.
Click to expand...
Click to collapse
Hmm, that's rather strange. What phone are you using? It's possible that Android is slowing down the sensor events when the screen is off to save battery, so it might have taken a while to detect it was out of your pocket.
PaeP3nguin said:
Hmm, that's rather strange. What phone are you using? It's possible that Android is slowing down the sensor events when the screen is off to save battery, so it might have taken a while to detect it was out of your pocket.
Click to expand...
Click to collapse
It's a Nexus 5 running the Slimkat Custom ROM. Not sure if that's helping...
I am trying the all "gravity screen on" now and it's turning the screen on instantly, so sensors shouldn't be the problem.
adl said:
It's a Nexus 5 running the Slimkat Custom ROM. Not sure if that's helping...
I am trying the all "gravity screen on" now and it's turning the screen on instantly, so sensors shouldn't be the problem.
Click to expand...
Click to collapse
Hmm, strange. In the Pocket Lock settings, what is your lock method set to?
PaeP3nguin said:
Hmm, strange. In the Pocket Lock settings, what is your lock method set to?
Click to expand...
Click to collapse
I left it on standard, so both methods.
I didn't change any other setting, only the setting I mentioned above. Well try the new version as soon as I see it in playstore (shows old version so for).
EDIT:
New version seems to work better/faster. I still uninstalled it, as i found out that for my phone usage i am better off without an automatic on/off app. I usually have my phone in the backpocket and before i sit down i take it out but don´t want it to turn actually on or i carry the phone around in my hands.
Anyway good luck with the app!
adl said:
I left it on standard, so both methods.
I didn't change any other setting, only the setting I mentioned above. Well try the new version as soon as I see it in playstore (shows old version so for).
EDIT:
New version seems to work better/faster. I still uninstalled it, as i found out that for my phone usage i am better off without an automatic on/off app. I usually have my phone in the backpocket and before i sit down i take it out but don´t want it to turn actually on or i carry the phone around in my hands.
Anyway good luck with the app!
Click to expand...
Click to collapse
Good to hear the new version is working better. Hey, thanks for using Pocket Lock!
New update just uploaded. I've sort of given up on the gravity sensor. Even though it's supposed to be more accurate, it tends to use way more power and seems to have problems on Samsung phones. The next update will default to using the accelerometer, though there is an easy checkbox to disable that change.
Could you guys let me know what the Gravity sensor power usage and the Accelerometer sensor power usage values in the Diagnostics screen show? I'm pretty sure that the accelerometer should universally use less power.
Just downloaded this a few hours ago and it's been great. The app UI itself is nice, too!
I particularly like the vibrate/sound on lock and unlock. Any chance you'd let us pick our own sound in the future?
I have just developed an app which presently does not use XDA Framework but would in the future. Perhaps, once done, I would be able to publish the app where the XDA developers do.
Because I am a new member and not allowed to publish links, I can explain where the app is. One can search the web for Steven Stanley Bayes com and find the web site with the same name, just with dashes. The app is on the front page where there is a link ProximitySensor app right on the index page. Some automatically inserted advertisements best be closed.
This app allows the user to select whether the proximity sensor controls the screen and whether the screen is always on.
When proximity sensor control is chosen, the screen of the phone powers down when there is an object close to the proximity sensor. Thus, the screen will automatically power down when one puts the phone in the pocket. This works regardless whether the user has chosen to keep the screen powered always or whether the screen is normally controlled by the OS.
When the screen has been chosen to be always on, the user can use the phone as a flash light which can easily be turned on by, say, placing the phone close to the chest. This way, the user can shine light for a while to see around, then, quickly stop the light and then, whenever needed, to quickly turn the light on again with just a movement of one hand. This way, the user would save battery energy as compared to constantly flashing light which may not be needed. The power button still works but the proximity sensor, when used as a switch, is easier to use than the power button.
Nice app here is the link to it everyone. www.Steven-Stanley-Bayes.com/ProximitySensor.apk :good:
Completely bewildering.
I think this app might, somewhere in its many convoluted settings, do what I am looking for. But after trying to read the tome of instructions, I am completely lost, as they were impossibly complex and convoluted to follow.
What I am looking for is a way to keep my smartphone screen OFF when calls are received while I am using a connected Bluetooth headset. I need the screen not to come on, and most especially to STAY OFF when the call is ended. Carrying my phone in my pocket, and having the screen come on when I get a call, exposes the touch interface of the screen to misinterpreted false inputs, especially in hot weather when perspiration is an added factor. What usually happens is some misinterpreted screen contact will disconnect my Bluetooth headset immediately after taking the call. I then have to dig my phone out and try to reconnect the headset while the other party is wondering why they can't hear me say anything. Very frustrating.
If your app can indeed do this, could you please reply with very specific instructions on which of its huge set of menu choices would be the correct one, and how to set it up? As it stands I won't try, because I have no clue which of them might be the one I want, with the multiple variety of similar-sounding functions.
*** App is now suspended, since it doesn't work in Tizen 3.0 and this OS has bezel blocking feature itself. Thank you for participation in this project! ***
Hi, I created app "ScreenLock Gear", because I want to monitor my sleep with locked bezel, eliminate turning screen on by my shirt etc. The mission of this thread is to make it comfortable for all of us.
So what is it?
Simple application for screen locking (bezel/screen/button).
Add widget -> Customise -> Tap to lock -> Enjoy locked screen
I uploaded new version (2.0) to Gear store. Description of the new version:
[Widget icons]
- Please see the first image in this post.
[Features]
- Battery friendly - CPU sleeps all the time, big battery saver (there is just listener in background).
- Widget for easy locking and customise settings.
- Supports both - AOD / Display OFF (for AOD is best to set lowest time to unlock).
[New in 2.0]
- Alarm / PIN / Call compatible! It temporary suspends ScreenLock.
- Customisation in widget.
- Unlocking by bezel (right-left-right-left).
- Option to see unlocking pattern progress, including clock and time to unlock.
- HOME button will temporary disable ScreenLock (until next display turn-off)
Again, thanks for the app.
I have not been out in the rain - when I use your app to lock my Gear S3, will it keep logging my walking/hiking/etc? Or does it pause other operations.
I would prefer it you keep it simple but I'm sure others will have requests for more options.
As I wrote elsewhere, when logging walks/hikes, the strap of my hiking pole hits the Back and On buttons and it eventually terminated the logging of my hikes. So this would be a perfect way to prevent accidental touchs of the buttons or screen from changing things.
Again, THANKS.
fred2546 said:
I have not been out in the rain - when I use your app to lock my Gear S3, will it keep logging my walking/hiking/etc? Or does it pause other operations.
Click to expand...
Click to collapse
No, the ScreenLock has no impact to any logging. Because it does simple job: When DISPLAY TURN ON, call DISPLAY TURN OFF. It is like if you set screen timeout to 0.3 sec. So it is only shortening screen timeout, having no negative impact on battery life or influence of logging.
fred2546 said:
I would prefer it you keep it simple but I'm sure others will have requests for more options.
Click to expand...
Click to collapse
Yes, I will add more options, but primary I want to make it more comfortable to unlock.
fred2546 said:
As I wrote elsewhere, when logging walks/hikes, the strap of my hiking pole hits the Back and On buttons and it eventually terminated the logging of my hikes. So this would be a perfect way to prevent accidental touchs of the buttons or screen from changing things.
Click to expand...
Click to collapse
Yes, it can be used, but now only with screen off. S health will continue to log your trip, but you can't see your statistics until you unlock the screen, which is not so comfortable. Maybe only on long hikes. It is in my future plans to enable this app on top of another app.
Thanks for testing
Great idea, I'll give it a run! Thanks for getting this out there
Used it on a 3 mile walk this afternoon. It appears to have worked fine. Shealth still informed me of my statistics at 1, 3 and 3 miles including pace, distance and heart rate. I played with the buttons while walking and the screen stayed dark (there is the brief message "locked") and did not interrupt my hike log. This walk was not as strenuous and steep as the one last week that prematurely ended when the pole straps pressed the wrong buttons. But since I was pressing randomly, it stayed locked.
I was easy to UNlock it and then to stop Shealth's logging.
Obviously, with the screen locked I could not see what the email alerts were but that is fine. I don't have to be permanently connected to my email.
Again, THANKS.
Thanks for the app. I've found I light them room up if I hit the watch while in bed. I may see if tasker can lock the watch at a certain time and maybe even unlock it. I don't know how difficult it would be for you but adding those features would be nice additions. Again, great job and THANKS!!
Konvalink, man, this bezel wake up was making my life miserable.
IMO the app works perfectly, no bells and whistles, just shuts the thing down.
So many thanks, also on behalf of my wife who was about to file.
Love ya man
Brilliant!
Brilliant idea! Thanks.
Thank you very much for this app. Maybe you can add the the back button for lock also.
I've been using this app every night for the past several days. Only issue I have noticed is that when I move my wrist, the watchface will show for 1/2 a second or less then give the "locked" notice. Overall tho, this works great and I really appreciate you sharing it with us.
Needs Polishing
A very essential app. THANK YOU! for sharing
Observations:
1. Hotspots are visible on the AOD screen
2. Momentary "screen on " before showing number of unlock tries
3. Delay in unlocking when a notification is active
Please continue the good work. Again, thank you.
konvalink said:
- It is not compatible with PIN protection - too hard to unlock screen
Click to expand...
Click to collapse
Can you please clarify? Can't I use your app if I need Pin also? I use Samsung Pay, so it's mandatory to have pin protection.
Ljusalfheim said:
Can you please clarify? Can't I use your app if I need Pin also? I use Samsung Pay, so it's mandatory to have pin protection.
Click to expand...
Click to collapse
The problem is, when PIN protection is enabled, I'm not able to monitor keys or run my app, since PIN protection is killing everything because of safety reasons.
But you can use it. Locking will work. Only unlock will be harder, because app has no chance to monitor BACK key for exit. I will try to solve it somehow, but now, this unlocking would work with PIN enabled:
- Press HOME several times. This will minimise ScreenLock app, so you can write your pin.
- Then you will see black screen, press BACK several times. Otherwise the ScreenLock will start on another SCREEN ON event.
So it's not comfortable yet, but it works.
So it's not comfortable yet, but it works.
Click to expand...
Click to collapse
Thanks, amigo, will wait for updates! Keep up the great work!
i just cant find it. tried a lot of times. may i get a link? thank you
konvalink said:
Hi, I created app "ScreenLock Gear", because I want to monitor my sleep with locked bezel, eliminate turning screen on by my shirt etc. The mission of this thread is to make it comfortable for all of us.
So what is it?
Simple application for screen locking (bezel/screen/button).
Add widget -> Tap to lock -> Enjoy locked screen -> Press BACK quickly several time to unlock.
Or set this app for HOME double-click.
[Features]
- Widget for easy locking
- Supports both - AOD / Display OFF
- Battery friendly - there is just listener in background, so CPU sleeps all the time
- Counter of locks
[Notes]
- This is alpha version, so please try it and comment your ideas
- It is not compatible with PIN protection - too hard to unlock screen
- To explain the unlock pattern - you have to press the BACK three times in sequence of time 0.1 to 0.3 sec between every press. Because if I let here more time, it will delay global locking time.
[Future plans]
- Primary: make unlocking more friendly
- Make user to select different unlocking pattern
- Ability to lock screen on current app (S health)
Click to expand...
Click to collapse
HI again.
i need to have one particular app permanently on screen (Skydive altimeter) during a certain period of gime (approximately 5 min ). It's essential that the bezel doesn't interfere so it would be great if your app could block it but I must see the interface of Skydive altimeter. Is it possible?
Thanks great app.please make time based lock option or lock when detect sleeping
Great app. I got 4 days of working time with AOD in red font.
About unlocking: maybe full 360 bezel movement instead of clicking back button?
Hi,
First off, thanks so much for this app, I don't understand why Samsung didn't put this type of feature directly in the gear... Anyways, I'll test this tonight and see how it goes
However, is it possible for you to add an option page where you can decice how to unlock and if we can show the number of unlock tentatives? On my end, I would prefear if the gear stayed fully off, without showing the number of tentatives.
Thanks!!
More than happy with app
I used the app a few times hiking and find it working very well. It keeps S-health's log going and the underlying S-health app does not prematurely terminate logging of my hike or walk because something (like the straps from my hiking poles) has activated the Home or Back buttons.
And even though I have Samsung Pay activated and have a password/pin your app does not interfere.
THANKS VERY MUCH.
Hello,
I'm doing a simple Android background service that implements the raise to wake up feature. Thus, when the phone is in sleep mode (i.e. screen off) and the user raises the phone from the table, it will be waked up by the service.
When I attach the phone to the computer using the debug USB to test the application, in particular looking at the message of logcat, everything work well. Even if the screen is turned off, I can see from android studio that the service is alive and when I try to raise the phone from the table it will wake up.
However, when I detach the phone from the computer, the service won't work. In details, sometimes it works, but if I leave the phone asleep it doesn't work anymore. Checking the running services on my phone I can see that my service is alive, however it is not responsive.
What could be the problem?
I tried both making the service as background service and foreground service. The result is the same.
I'm testing the service on Android 7.0.
You can see the source code (with a precompiled binary) and/or contribute on github (look for the project called raison, I don't have the permission to put the link). The service is started after the boot of the phone or when the user opens the activity.
It doesn't seem a bug of the application (e.g. in the logic), because it works during the debug phase.
Furthermore, I don't have any power saving option and I see the service running (using the developer options).
Another note is that my phone has the double tap to wake up, however the double tap often doesn't work or is really slow (it wakes up after >10 seconds), thus seems that my system is slowing down so much during the sleep. However, applications like whatsapp work well.
There is a way to force my phone to keep the service running (without slowing it down) even in the sleep mode?
Thank you! It could be helpful also to have a feedback of the application on your phones, to see if it is just a problem of my phone or it is some behaviour of Android that prevents the correct execution of the service.
EDIT:
I've also tried to use a wake lock to keep the CPU awake (preventing the deep sleep) without success.