I just purchased a new phone out of the box. I attempted to update the phone with samsung software and it now is stuck on a gren emergency recovery screen. I downloaded the newest firmware from Sammobile and odin. I attempt to restore phone but it sticks at the very end at product and never finishes. I have verified it's the right firmware. I don't know how to move forward. Every video on youtube acts like it's no problem but my problem wont fix. Thanks.
Not good...
Related
Ok so I have tried on another thread that kind of went dry mainly cause I was MIA....but now I am back and have done some more reading up and think it is safe to say rooting and trying customer ROM's is not for me...lol I pretty much messed up a new Galaxy Tab 2 7' brand new only after a few weeks trying to root it. I had another thread link below:
http://forum.xda-developers.com/showthread.php?t=1834368&page=2
But I did not get anything to work right. At this point I am really just looking to get the tablet working. I don't really care what firmware rooted or unrooted...i just want to be able to use it....do some more research and and maybe join the rooting community again when I get a Galaxy S3.
I'd appreciate any help. I am pretty stuck right now!
Go into Download mode "power" plus "down volume", then up volume. Use ODIN to load this:
http://forum.xda-developers.com/showthread.php?t=1645295
ODIN
http://forum.xda-developers.com/attachment.php?attachmentid=581913...
You will need driver from Samsung Keis install for P3113
http://www.samsung.com/us/support/owners/product/GT-P3113TSYXAR
FYI - I needed to load CMOC10-Kernel to get my tab to stop boot looping when I flashed JB AOKP
bark777 said:
Go into Download mode "power" plus "down volume", then up volume. Use ODIN to load this:
http://forum.xda-developers.com/showthread.php?t=1645295
ODIN
http://forum.xda-developers.com/attachment.php?attachmentid=581913...
You will need driver from Samsung Keis install for P3113
http://www.samsung.com/us/support/owners/product/GT-P3113TSYXAR
FYI - I needed to load CMOC10-Kernel to get my tab to stop boot looping when I flashed JB AOKP
Click to expand...
Click to collapse
Worked like a charm....you made it simple! Thanks!
Continous boot loop on tab 2 p3113
My problems are kind of different from all the others I have read. Yes it is similar that it boot loops. But mine freezes at different areas in boot mode. This is driving me crazy and I am spending way too much time and effort trying to fix it. Hopefully you can help.
I don't really know for sure if the android os was 4.1.1 or 4.1.2 or some other rom but it did state in download mode that it was original and not custom rom.
I received this tab from ebay and it is new never used, but somehow whoever had it probably tried to flash it and now I received it with a continuous loop. They stated that it stuck in SAMSUNG logo. I found it true but it also stuck other places as well. I did do a reset first before I attempted to flash it.
I did the Odin flashing.I found the 4.2.2 xar file HOME_XAR_P3113UEUCMK3_1978026_REV04_user_low_ship.tar.md5 and did according to instructions. But that didn't work. It did boot into android but it didn't stay there very long and rebooted itself. I couldn't stay more than 20-30 seconds and it would reboot itself or freeze at various places in android. I also hard reset it. Still same thing. It would also freeze on the first samsung logo tab 2 screen and also at the blue circle with samsung logo. It was different every time. I would have to hold down the on button until it rebooted. It also stalls or freezes during Android upgrading... Optimizing app at various number stages sometimes it goes thru that and then to the next phase of installing apps then it freezes again. I cannot get it to work if I try to upgrade via wireless upgrade to samsung. it will freeze even before it downloads the upgrade file.
I then flashed back to the original xar file P3113UECLK7_P3113XACCLK7_XAC which is 4.1.1 That worked a little better, but it freezes and also the sound chatters when it freezes on bootup you know, when the samsung sound comes on then the blue circle.
Finally I tried to recover or flash from the recovery mode using the upgrade from a sdcard. using the original 4.1.1 xar file. It hewlped a little but still doing the continuous boot loop at different stages but it gets to the Android is upgrading... more often. It freezes always now.
So I don't know what else to do. You mentioned a CMOC10-Kernel to load, how does one go about doing that and what are the steps.
Thanks in return if you can suggest things.
Wayne
Hello everyone! I was sincerely hoping that someone would be able to help. I believe I messed up my phone beyond repair by trying to root it for the 2nd time. I rooted my phone in Sept 2014 and accidentally dropped it and broke the LCD (not the actual screen, but a piece inside of the phone). Samsung replaced the screen but they had to reset it so I lost the root. I wanted to try to root it again today. I already had all the tools; Odin, Superuser, and Philz Recovery. I put the phone into download mode, flashed Philz, and Odin said "Passed". When I put the phone into recovery mode, it didn't look like it did before. It just looked like the android stock recovery. I assumed (noob) that I may have done something wrong. So I tried flashing it again and it failed and was stuck in the download mode (Do not turn Target off). I waited approx 30 min and just said, "Screw it" and pulled the battery. I know stupid. Then I got the "Firmware upgrade encountered an issue message..." I did some research and many people on here and other android forums were telling others with somewhat of the same problem to download the stock rom. I'm currently downloading it but am worried it's going to do the same thing; "fail". I will update as soon as I try to flash the stock rom, but if anyone has other options, I'd so appreciate them.
Thanks so much for helping.....
Hedup34
P.s. I had the most up to date software for Sprint (maybe that was the problem)
Let me start by addressing I know this isn't the sprint thread but there's a lot more development here which equals more help. Plus this issue seems to be able to happen to any variant.
Second, this isn't my device I'm trying to see if it can be fixed for a friend. I'm not that familiar with Samsung devices but I have been able to get them working in the past via Odin or kies but this time I need some help.
So this is what's going on, my friend recently rooted his S6(SM-920P) not sure which method he used (don't think it matters at this stage) and was on stock rom (LP5.0.2) with xposed framework installed. He hadn't changed the kernel AFAIK oh but I did install TWRP for him and everything was working. Long story short he woke up a couple days ago to his phone being unable to turn back on. I told him how to get to download mode and I asked him what did it say on the top left corner it said something like "system binary not SEandroid locked" underneath that it said fac lock
So I had him give me the phone thinking somehow it did a OTA update while he was asleep or something either way I was confident using Odin to flash the firmware would solve the issue. Had the firmware finished flashing I'm confident it would have but halfway through Odin simply froze on installing system. I figured its just gonna take a while 45 mins later it was still stuck at the same spot.
Not really thinking about it I figured I will just reboot the phone back into download mode restart the process it should be fine. Not a good idea. Now all I get is a green screen saying to access the smart switch emergency recovery system. But it gets better.
My computer isn't recognizing the device now. I installed smart switch software and it's not recognizing it. I even installed Kies and it's not recognizing either.
Is his phone toast or what? I tried emergency system recovery but I need the S/N of his phone to possibly get this thing working again, but it boot into anything anymore except the screen that says Samsung switch...
PLEASE HELP ME if it's bricked it's bricked I get that but if there's a way to figure out what to do I'm all ears. Thanks in advance
hello guys
new user here.
So heres the issue that im hoping you lovely people can help out with.
I have a samsung s6 canada (bell) version SM-G90W8 that when i was updating the software it crashed on me and corrupted the software of.
I downloaded odin and tried to flash the stock firmware back on the phone. I made sure i downloaded the right version of the flash file and flashed it. all went well. Odin successfully flashed the file and it gave me the green light that said pass!
My phone rebooted and the installing update screen came up. It was installing and at about 25% it got stuck and gave me an error that had a yellow triangle with an exclamation mark inside of it with an android logo. Below it is says " error !"
I tried to reflash the stock rom a few times and everytime it was success full when the phone booted it gave me the same error.
Someone PLEASE PLEASE PLEAAASE HELP!!!
thank you
shahood24 said:
hello guys
new user here.
So heres the issue that im hoping you lovely people can help out with.
I have a samsung s6 canada (bell) version SM-G90W8 that when i was updating the software it crashed on me and corrupted the software of.
I downloaded odin and tried to flash the stock firmware back on the phone. I made sure i downloaded the right version of the flash file and flashed it. all went well. Odin successfully flashed the file and it gave me the green light that said pass!
My phone rebooted and the installing update screen came up. It was installing and at about 25% it got stuck and gave me an error that had a yellow triangle with an exclamation mark inside of it with an android logo. Below it is says " error !"
I tried to reflash the stock rom a few times and everytime it was success full when the phone booted it gave me the same error.
Someone PLEASE PLEASE PLEAAASE HELP!!!
thank you
Click to expand...
Click to collapse
Use Samsung SmartSwitch to reinstall the Software
Sometimes you need to wipe the data partition in recovery mode. As you already tried flashing firmware.
Or download your firmware from another page. Or just redownload what you got. Also make sure 100% its the most recent firmware for your device. Then report back what you find
U99Dev said:
Use Samsung SmartSwitch to reinstall the Software
Click to expand...
Click to collapse
Hey so I tried that route as well but it said that smart switch doesn't support my device.
Hi guys, I was updating my phone and when the update ended it just kept starting and restarting all the time.
When the samsung logo appears it just restarts again and again.
The phone is not rooted but the bootloader is unlocked.
I wanna flash the latest firmware with odin, do you think is it a good idea or should i try something else?
I think here you can find the solution: https://forum.xda-developers.com/galaxy-s10e/help/s10e-literally-stuck-bootloops-2020-t4032023/page2