Dissappointed did not get the free clear case. My 6T until last day I shipped it for trade in used the free included case. Worked great, I really liked it, tried bunch from Amazon and just liked the free stock one.
I am using the Spigen hybrid case on OP9.
- fits well. But the interior is a dust magnet. Almost feels sticky, hard to clean off the dust and fingerprints.
- the exterior is a horrible mess of fingerprints!!
Pulen glass protector
- thick... too thick. Front does have cut out for camera. Clear, applied well. Not a fingerprint mess. Fits well with cases.
- the rear camera protector even thicker. It also cover the lense. Does not have cut outs for the lenses. I removed cause probably adds distortion. Did not do any scientific methods to test hypothesis.
Pulen clear case with floral print
- loose fit. Slips off easily, terrible
- the sides do not have a lip to cover and provide screen protection.
- returned back to Amazon.
- DO NOT BUY
Cresee silicone case
- It has a soft texture to it, really pleasant feel
- Fits the phone well, buttons feel great
- Great case for $10
Qitayo clear thin case
- Terrible buttons. The buttons are not recessed so they fit over the buttons, they sit right on top so it's really easy to click then. I can only imagine what a disaster it would be with the phone in the pocket.
- DO NOT BUY
Orzero Premium Tempered Glass x3
- Easy to apply, the case to assist proper alignment of glass was useful.
- No issues with touch sensitivity or fingerprint
- Would recommend over Pulen.
If anyone finds glass that is thinner than 0.3mm please let me know
For sound.
Love that BT connections show battery levels for each ear piece and case. This from mpow X6 and the OnePlus Budz.
Being able to switch audio output from volume rocker. I don't remember doing this on the 6T, OnePlus dragging feet on Android 11 update for that.
I still have dongle from 6T. Senn Hd58x, AT R70x and A990z all sound great.
For gym, mpow x6 seems best. For shopping and wandering around I prefer the Budz. Their call quality seems better to people I called.
Thanks for your input!
I'm using a spigen tough armor. Sturdy, well built, perfect fit, nice little kickstand, very good protection.
It does add quite a bit of bulk though. The buttons are flush with the case so it's not immediately obvious where they are, but you get used to it really fast of course. The kickstand is also flush with the case, which is nice.
I had a spigen slim armor on my previous phone, and this tough armor offers more protection, with a raised lip all around the screen. Given the choice, I'd prefer a little less bulk than this.
Wireless charging works just fine with this case.
So, I used the Pulen glass protector on her phone. But when I did, when I went to remove the default screen protector, I actually took off the glass from my phone and not hers, oops.
Bought Orzero.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So it comes with three, a case to help apply the glass, the usual alcohol swap, wipes and dost remover and glass sticker assists to help place the glass.
Result, the frame case worked great, it's the same dimensions as most cases. Was easy to align the camera cutout and ensure a proper fit. It's clear, smooth, the 2.5D edges are fine. Oleophobic coating is as good as I've used in the past. I have no problems with touch sensitivity or finger print reader. I think it's actually better than the Pulen.
Verdict: It's $8, comes with 3 glasses, with three sets of alcohol swab, cleaner, dust cleaners. The case is helpful. I'd recommend it.
And no I'm not testing how well it works for screen protection, I've used enough of these over the past, they are all the same. The only difference is ease of use or quality.
Between Pulen or Orzero, I recommend Orzero. Pulen is fine as well
Anccer case on Amazon is nice and thin. A glass screen protector is just barely recessed on the lip however. The worst is that it's a fingerprint magnet like no other.
I got Spigen glass and I´m really dissapointed with it.
Terrible response and lots of phamton touches over the screen.
Accessories this far:
Spigen Tough Armor
UniqueMe TGSP (which I swear by)
and today I got a dual sim tray for my
North American OP9. of course on AA firmware, I didn't get service in the second sim slot. But we'll figure that one out eventually.
Also Dbrand Skin.
I'm using Gadgetshieldz skins on my One Plus 9 for 2 months and it fits very well from edge to edge, I get scratches rarely but it protects the back of my phone from getting damaged.
Related
http://www.spigen.com/galaxy-s4-screen-protector-glas-tr-slim-premium-tempered-glass.html
Hope someone can test it. I'd like to get it but it caused all sorts of problems on Xperia Z. As S4 has a ton of sensors I wonder how it's going to cope.
I'm running a SGP Ultra Fit and the Ultra Crystal at the moment, although I'm going to get a glas.Tr in the next couple of months when reviews are out; out of my experience with the glass protector on my Galaxy SII, it worked as advertised with the main problem being the unresponsiveness to cold fingers (e.g. Winter in Europe), which made me go for the Ultra Crystal. But since the new glas.Tr is slimmer and the screen of the S4 much more sensitive (gloves, Air View), I'm willing to give it a second try.
I have one installed on my S4, have to say that these are hands down the best feeling screen protector Ive used. I was a long time fan of the Invisible Shield HD for several devices before this one. My installation was not perfect, however. I have two tiny specs of dust presumably under the protector but not worth taking off and sending back for the replacement.
I don't yet have my S4, but nevertheless I have ordered both the glas.tr screen protector and the ultra slim shell.
There was a somewhat decent YouTube video that showed the glas.tr on an iPhone 5. What was important for me is that this protector has the adhesive across the entire screen and not like the S3 versions where it was limited to only the edges.
"So what you want me to do 'bout that?"
I have had mine on for 2 days now and I love it! Its case friendly and fits awesome. Also I had to take it off because of dust like 5 times and some packing tape took it right off the protector and went right back on! Now the tr slim is 38 I think vs the 25 for just the slim and the slim is I think about half as slim as the tr slim. So I'm not sure what I would have liked better. The rounded edges feel great. I can handle my phone and everything feels so smooth but if the slim is super thin, maybe I would have liked that more. Either way its just like having a screen on a screen. No touch issues or brightness problems at all. I'm almost sad that its meant to be thrown away once it took its fall for you! 5 stars. But I will be ordering a metal home button. Even the curved cutout for the home button still makes it too deep to press comfortably.
Sent from my SAMSUNG-SGH-I337 using XDA Premium HD app
my application for the glas.tR is 99% perfect except for the bottom right corner just at the edge of it where there is one tiny speck of dust trapped.....but no point taking it off and ruining the adhesive..
mini glas.tR review: freaking smooth to touch, oleophobic coating does its job and ensures it aint a fingerprint magnet. easily wiped off when there are fingerprints.
nothing beats the feeling of glass....and the clarity is top notch...pretty damn worth it in my opinion.
Application tip: if you are applying yourself make sure you are in a dust free environment, for me i did it in my shower after a warm bath (the steam traps dust in the air and makes the evironment relatively dust free)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
thanks for the photo semajm. I'm looking forward to getting the glas for my coming s4, especially now that they do a full screen adhesive.
Is the Tr (curved edges) worth the extra cost, compared to the "t"?
I see the one you have pictured is orange, and the one on the website which is blue, I'm just wondering exactly what the difference is, if you know?
glas.tR, the "T" stand for tempered and the "R" stands for rounded
the blue one is 0.28mm making it thinner.
the orange one is 0.4mm with the rounded edges. some users say it might fit cases better than the blue one. additionally, spigen says the rounded edges make it anti-chip
I'm really torn between the GLAS.tR SLIM and the Bodyguardz Pure. I know for a fact that the latter does not have rounded edges but I've heard some stating the oleophobic coating on the Pure is slightly better than the GLAS.tR, anyone have any opinions or have had both?
semajm85 said:
my application for the glas.tR is 99% perfect except for the bottom right corner just at the edge of it where there is one tiny speck of dust trapped.....but no point taking it off and ruining the adhesive..
mini glas.tR review: freaking smooth to touch, oleophobic coating does its job and ensures it aint a fingerprint magnet. easily wiped off when there are fingerprints.
nothing beats the feeling of glass....and the clarity is top notch...pretty damn worth it in my opinion.
Application tip: if you are applying yourself make sure you are in a dust free environment, for me i did it in my shower after a warm bath (the steam traps dust in the air and makes the evironment relatively dust free)
\
Click to expand...
Click to collapse
Have you tried to use gloves on and check if it work?
007shaolin said:
Have you tried to use gloves on and check if it work?
Click to expand...
Click to collapse
just did at your request. not very thick gloves. it works.
Mrglass86 said:
I have had mine on for 2 days now and I love it! Its case friendly and fits awesome. Also I had to take it off because of dust like 5 times and some packing tape took it right off the protector and went right back on! Now the tr slim is 38 I think vs the 25 for just the slim and the slim is I think about half as slim as the tr slim. So I'm not sure what I would have liked better. The rounded edges feel great. I can handle my phone and everything feels so smooth but if the slim is super thin, maybe I would have liked that more. Either way its just like having a screen on a screen. No touch issues or brightness problems at all. I'm almost sad that its meant to be thrown away once it took its fall for you! 5 stars. But I will be ordering a metal home button. Even the curved cutout for the home button still makes it too deep to press comfortably.
Sent from my SAMSUNG-SGH-I337 using XDA Premium HD app
Click to expand...
Click to collapse
Did you put the little jelly bean sticker over your home button? Makes the button raised up like it should be, works pretty well actually.
im waiting for the aluminum ones to be available....the jelly beans totally make it cartoonish
So.. do the sensors work? Airview for example.
yup, if u look the sensors are not even covered. the one covered is the front facing camera and it still works beautifully
is this glas stuff work with the neo hybrid case
spigen says yes, it works with the neo hybrid case. im waiting for mine to come in
Anyone have one that can confirm it fits with a tight fitting case?
thacounty said:
Anyone have one that can confirm it fits with a tight fitting case?
Click to expand...
Click to collapse
I have a glass .tr that I will be trying with the Rearth slim case. I dont anticipate it being an issue but will report nonetheless. I am thinking of getting the Neo hybrid soon though and am wondering if using those two together will cause the protector to push up.
I purchased the S-Line Note 4 clear case with kickstand and it fits ok but it doesn't cover the bottom bezel portion that's under the home button. I've heard that the Ringke clear case has the same problem as well. Any ideas where I can find a clear case that covers the entire lip/metal portion of the Note 4? It doesn't have to be clear but it would need to be a soft case and not a hard one because I don't want the case itself scratching the phone after putting the case on and off a couple dozen times.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Diztronic if you want thin.
IF you want slim, good looking and good protection including durability and anti microbial protection....the body glove satin is the way to go....
jamesrick80 said:
IF you want slim, good looking and good protection including durability and anti microbial protection....the body glove satin is the way to go....
Click to expand...
Click to collapse
I was thinking about buying that one. Is it a soft case though? I don't want a hard case scratching up my phone. Did you buy one? Can you take pictures of it please?
DADDYDC650 said:
I was thinking about buying that one. Is it a soft case though? I don't want a hard case scratching up my phone. Did you buy one? Can you take pictures of it please?
Click to expand...
Click to collapse
Spigen Ultra Hybrid. I have The crystal clear. I had The same concern about scratches & I'm completely satisfied with this One.
http://www.amazon.com/gp/aw/d/B00MAWPVXM?pc_redir=1412161110&robot_redir=1
Let Me see if I can attach One on this app, #noob
It is a soft "hard" rubber case. It is made out of a TPU type silicone. It isn't flimsy. You shouldn't have to worry about it stretching out of shape over time. You have to have battery removal OCD or something for that to happen. lol
I Usually Don't Beg For a "Thanks", but help a sista out if this was helpful. (^.~)
Thank you for the pictures. It seems like your case doesn't fully cover the lip at the top of the phone. My case covers everything except the bottom lip of my phone.
DADDYDC650 said:
Thank you for the pictures. It seems like your case doesn't fully cover the lip at the top of the phone. My case covers everything except the bottom lip of my phone.
Click to expand...
Click to collapse
Lip Fully covered unless You ate referring to The bezel (white part of screen?) if so, that part had no contact on a flat surface with this case & glass screen protector.
I'm talking about the white bezel around the glass. It looks like your case covers the white bezel on the sides of your phone but fails to protect the top portion. What if your phone falls and smacks the top bezel instead of the lip of your case?
DADDYDC650 said:
I'm talking about the white bezel around the glass. It looks like your case covers the white bezel on the sides of your phone but fails to protect the top portion. What if your phone falls and smacks the top bezel instead of the lip of your case?
Click to expand...
Click to collapse
Just looks that way because the case is clear. Here are some more images from their site.
http://www.spigen.com/brands/samsung/galaxy-note/galaxy-note-4/galaxy-note-4-case-ultra-hybrid.html
The "case capsule" is pretty slim too. Entire front bezel covered as well.
Seems like the case covers the entire bezel around the glass in those marketing pix. Why does the sides on your pix look yellowish white?
Check out how the case doesn't fit right beneath the home button. I need someone that protects the entire bezel on all sides.
DADDYDC650 said:
I'm talking about the white bezel around the glass. It looks like your case covers the white bezel on the sides of your phone but fails to protect the top portion. What if your phone falls and smacks the top bezel instead of the lip of your case?
Click to expand...
Click to collapse
There is a glass screen protector on it as well. I am just as anal about protecting All My Gadgets. Believe Me! I am an accessory junkie I have more cases coming. This One was affordable and won't damage through finish. The lip is slightly raised as well. If it did fall flat on its face it would not get scuffed. I have this case. Tempered glass screen guard & a purse/pouch I put My phone in when it's in My handbag! I Do Not walk The streets of NYC w/ "The precious" exposed by any means. When must make a phone call in public I do say in a spot I deem "safe", that includes from being snatched out My hand to an accidental drop by slip of The hand or a bump during rush hour. I am all over this. I know for Me, this is a good minimalistic setup. Will work great for My car holster as well. I Hate Bulky Cases. Everytime I bought an Outter or something equivalent; I regretted it. Likr someone replied earlier, it's hard to get a good sense of The fit. I have a wallet case on The way as well; I found on eBay. Hope You find something that works for !
View attachment 2977684
DADDYDC650 said:
Thank you for the pictures. It seems like your case doesn't fully cover the lip at the top of the phone. My case covers everything except the bottom lip of my phone.
Click to expand...
Click to collapse
Spigen New Hybrid - thin - classy loooking - Metal outshell - Rubber Inner Shell - great protection - covers the areas you are concerned about - and I think is the classiest looking case made today.
Good Luck - hope this helps
DADDYDC650 said:
Seems like the case covers the entire bezel around the glass in those marketing pix. Why does the sides on your pix look yellowish white?
Check out how the case doesn't fit right beneath the home button. I need someone that protects the entire bezel on all sides.
Click to expand...
Click to collapse
I noticed that, too. FWIW, I have the same case on a charcoal black Note 4; there's no discoloration.
Ended up ordering the Ultra Hybrid Crystal Clear case. Thanks for the input folks.
Slapped on the Spigen Ultra Hybrid onto my White Note 4. Covers up the white bezel below the home button better than my S-Line clear case but not completely. Bummer...
I bought the Ringke Fusion case off amazon and been satisfied. It covers the bezel and has port covers too.
http://amazon.com/gp/product/B00N174VAE/ref=ox_sc_sfl_title_2?ie=UTF8&psc=1&smid=A8YCUEQIOX5AP
I just pre ordered this black TPU slim case. I hope its good and don't have issue with mic holes.
http://www.amazon.com/gp/product/B00NHL5BYY/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
I saw this case and seems to be very effective. I don't care about scratches in the chamfered edges as the metal polisher does his job very well. I just don't want to have scratches in the backpart or the painted bezels, and put the phone face down without scratching the screen. Does anyone have this case? Also, I want to know what material is it, TPU? Plastic?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks!
The back part is a grippy tpu material the border is plastic or metal depending on which version you get. This case hasn't scratched my bezels or edges at all and it does have a slight lip to protect the screen when laying on flat surfaces.
---------- Post added at 09:04 PM ---------- Previous post was at 09:03 PM ----------
Disregard I thought this was the neo hybrid, I don't own the capsule., sorry.
gcforreal said:
The back part is a grippy tpu material the border is plastic or metal depending on which version you get. This case hasn't scratched my bezels or edges at all and it does have a slight lip to protect the screen when laying on flat surfaces.
Click to expand...
Click to collapse
I had one on my Galaxy S5. Its a tpu style case. It had a small lip so you could lay it flat face down with no worries.
I got this case. Like stated above its a tpu case with a grippy back. Does have a lip so u can lay it face down. Adds very little thickness to the phone. Buttons are very responsive i just wish they stuck out a bit. The buttons are flush with rest of the case as shown in the first picture
I have this case as well. It's thin, it's grippy and I haven't noticed it leaving a single mark on the phone yet.
Only downside I can think of is the quite sharp edge surrounding the USB port on the bottom which might make it less comfortable to hold if you hold the phone with your pinky at the bottom.
Overall I think it's a great case
Verstuurd vanaf mijn SM-N910F met Tapatalk
Had this case on for 3 days before noticing scratching on the sides. Haven't used it since.
Deltalpha said:
Had this case on for 3 days before noticing scratching on the sides. Haven't used it since.
Click to expand...
Click to collapse
Its TPU and will not scratch the sides, my wife and i have this case and it has not scratch the sides. My Wife throws her phone around and this case does protect it. It is a pity there is no white case
A|ex said:
Its TPU and will not scratch the sides, my wife and i have this case and it has not scratch the sides. My Wife throws her phone around and this case does protect it. It is a pity there is no white case
Click to expand...
Click to collapse
Indeed. It is such a strong case. I would recommend it to all.
avilancaster said:
Indeed. It is such a strong case. I would recommend it to all.
Click to expand...
Click to collapse
I also have the Spigen "Neo Hybrid" case. Fits well, buttons are very responsive, no complains. I just would like it to be thinner but given the fact that this case was the only one I could find in Uruguay for my Note 4 I can't complain at all.
I recommend it.
Regards.
I have this case, I got it mainly because I loved the Bounce case for my note 3.
I really like it it's thicker than that normal tpu and feels good in the hand. It covers everything minus the screen and the cutouts are right. I think it's worth the 10.00 price tag, it's not as thick as the bounce case, but it still works well.
Archaenon said:
I have this case, I got it mainly because I loved the Bounce case for my note 3.
I really like it it's thicker than that normal tpu and feels good in the hand. It covers everything minus the screen and the cutouts are right. I think it's worth the 10.00 price tag, it's not as thick as the bounce case, but it still works well.
Click to expand...
Click to collapse
For a case that fits and protects, and is aesthetically suiting, I'd agree that $10 is very reasonable.
the buttons might get annoying.. i had the spigen with kickstand and the buttons annoyed the hell out of me. for a simple tpu case, i always go with diztronic.
also.. WTF spigen?? really auto focus embossing?
Don't buy this case, I was dumb enough not to read the reviews on amazon before purchasing it off of eBay! The case scratches the beveled shiny edges of the note 4, if you don't believe me check amazon for yourself.
skawster said:
Don't buy this case, I was dumb enough not to read the reviews on amazon before purchasing it off of eBay! The case scratches the beveled shiny edges of the note 4, if you don't believe me check amazon for yourself.
Click to expand...
Click to collapse
nice try but its TPU it does not scratch the case, i have 3 of these and not a single scratch on either note 4 phone.
If this case scratches the sides so do all the other spigens with tpu inside. The only one that does scratch is the hardened plastic thin one (which i also have as well).
This is a comparison even though it wasn't specifically asked for. The Capsule case was my first purchase for the Note 4 because I liked the look, but it only led to dissappointment for me. Thus my reason for the comparison.
Spigen Capsule case:
Cons:
It is a loose fitting case compared to some of the others I prefer. Allows sand and dust in between the case and the phone which then causes the scratching that everyone talks about. Desert evironments are particularly bad.
It is a sharp case (it won't cut you, but it can be uncomfortable) at the bottom near the usb port and along the edges.
The button coverings are mediocre at best. They make button pressing less appealing especially for the volume.
Pros:
The case is fairly attractive for a TPU case (more so in pictures than in person).
The case has decent grip
Slim case
Samsung's Protective cover is the same size and profile:
Cons:
Not the most grippy case, but adequate.
Pro's
Slim case
Tight fit on the phone. Little room for particles to get trapped between the bezel and the case.
No sharp edges.
Does not collect grime and oil smudges like most cases. I literally never have to wipe it down.
Best looking TPU case I have seen for the Note 4.
Button coverings are clicky and feel great
Capsule pics
Protective Cover pics
I have read a lot of good reviews on the Samsung Protective Cover. It seems like you really can't go wrong with that one.
I have the Neo Hybrid Metal version which looks very similar to the capsule. My case has been on for 30+ days and I removed it to look for scratches. Nothing. Looked great. It looked just as great as the day I put it on. I think the scratching may occur when dust/debris gets between the phone and the case. I am very anal about cleaning every surface before I put the case on.
Also I have a at&t note. Read carefully it seems verizon and sprint variants moved one of the microphone holes. A lot of people are drilling new holes to uncover the relocated microphone...
will this case stand on its side and bottom on its own?
Nillkin Mi A2 accessories small review
*Template from my own Nillkin accessories for Mi A1 review.
Just bought my Mi A2 2 weeks ago, and my accessories finally arrived few days ago.
A few add-ons to my Mi A2: Nillkin Amazing H+ Pro 2.5D tempered glass screen protector, Nillkin Mi 6x/A2 Frosted Shield case (Black). Price stated as off 10/13/2018
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Screen protector:
*White edge elimination liquid ~$0.5 is highly recommended
Nillkin Amazing H+ Pro 2.5D tempered glass screen protector ~$11 USD
Recommended if you are highly skilled, you need to be highly skilled to apply the screen protector perfectly and no mistakes. Because once you get air bubbles underneath the screen protector, it's nearly impossible to get it out. Plus if you remove and reapply, you will pretty much get permanent bubbles at the corner. Once you lift it up even with little force, the adhesive is pretty much destroyed. Other than those cons I will think it's an okay screen protector, if you can get it on spot the first time without air bubbles. It's also coated with oleophobic coating, so you will probably get less fingerprint on your screen, it's thin with 0.2mm thickness (can flex slightly more without breaking it comparing to conventional screen protector).
Conclusion: It's an excellent screen protector if you can apply it in one go perfect alignment, no dust etc.
Tips: Do not take out the screen protector until you are ready to apply it. Use all the accessories Nillkin provided before applying the screen protector, clean your screen with wet & dry wipes first, and then use the anti-static film to remove remaining dust on the screen. Your screen shouldn't pick up any dust for 2-3 mins unless you are in a very dusty place. When you finally ready to install the screen protector, remove it from the protective film case and then apply it on your screen. Don't peel off the adhesive protection film altogether at start, instead pull 30% off and then try align to your screen properly, once confirmed then only peel it off completely. If you have bubbles on the side, just keep pressure on it for around 1-2 mins and they will be gone. You will need to apply the white edge elimination liquid if you get white edges around the screen protector, I have tried a couple screen protector and it is impossible to eliminate it by just using pressure alone, so this liquid will help you eliminate the white edges if you don't like imperfections.
Package contents:
After applying screen protector and white edge elimination fluid:
Case:
Nillkin Mi 6x/A2 Frosted Shield case ~$10
Highly recommended. I always bought Nillkin case, although it doesn't cover the upper and bottom part of your phone. It looks really slick and provide very comfortable grip for you. Note that the cover only give very minor buffer between your screen and surface if you put your phone upside down. Adding any tempered glass will definitely cause it higher than the case. Although it only gives basic protection, but the case is higher than the rear camera bump, so you won't be damaging the rear camera lens or glass when you put it on your table plus it doesn't look that bulky compared to those TPU case. I always love Nillkin case, they made very good cases for each phone, and their quality is very good too.
Conclusion: If you are looking for a case that won't make your phone looks bulky and add some grip, this case will probably suits you. But take note that only gives basic protection, any drops will be bad.
With big brother:
Good review ,I have both products which i love
Hi, if there any link to buy only the liquid?
Thx
Enviado desde mi Mi A2 mediante Tapatalk
With this device so new there hasn't been time for many amazon reviews for cases and what not. What did you end up going with?
I went ahead for the official translucent case and I'm waiting for screen protectors to be available. I'll try to grab a Spigen if they get released soon enough.
EDIT: I purchased the Spigen GLAStR screen protector and it should come by tomorrow. I'll see how it behaves with the Google case. I'll probably go as well for a Spigen case, we'll see. But maaaaaaaan do I love this phone, it made me go back to XDA and be involved with it...
mine buy on amazon delivered before the phone with screen protector included.
Google case. Cheap screen protector from Amazon. So far so good. No issues with finger print sensor. Few dust particles that's killing my OCD.
Went with the Spigen Liquid Air Armor...thin rubber, just to keep a grip.
Getting these for my pixel 6a today will send pics when I get them
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Went with these two, screen protector went on easy with the alignment tool, and the case is nice and grippy, although that's not a card slot in the back like some reviewers say it is, it's just for grip.
Spigen Ultra Hybrid (I may switch to one of the Armors, which is what my 5a has, depending on how I like this one)
Tempered glass screen protector (has an alignment frame and worked beautifully)
Tried Caseology Nano Pop, thought it too slippery. Ended up with what I had on my 4a, Spigen Rugged Armor. Would like a spongier feel, but at least it has texture all the way up on both sides.
BHUSHAN7988 said:
Getting these for my pixel 6a today will send pics when I get them
View attachment 5673363 View attachment 5673367
Click to expand...
Click to collapse
I am using the Spingen screen protector, it is excellent and does not cause problems with the official case
Yesterday I ordered several shells I could change them every day like that.
Spigen Liquid Air Armor and the LK tempered glass screen protector. I've had great luck with both companies in the past.
I ordered a cheap one days ago when I ordered mine, because Ghostek did not have one yet. I see they have one today listed. The cheap one actually isn't bad. A snap on outer shell and "rubber" outer cover. Back has a small window open around rectangle camera and then a clear window down the back. https://www.cellularoutfitter.com/c...phone-case-black-clear-hr-qbshbum-6apix-clrbk I still may order the Ghostek though, been using them for years.
BigOkie said:
Spigen Ultra Hybrid (I may switch to one of the Armors, which is what my 5a has, depending on how I like this one)
Tempered glass screen protector (has an alignment frame and worked beautifully)
Click to expand...
Click to collapse
do you have to increase the sensitivity of this glass or is it possible?
Zaxx32 said:
Went with the Spigen Liquid Air Armor...thin rubber, just to keep a grip.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Ditto, Spigen have been my favorite for a while now
I ordered the Spigen Liquid Air Armor Designed for Pixel 6a Case (2022) - Midnight Green and [3 Pack] iVoler Screen Protector Tempered Glass for Google Pixel 6a 5G 2022 (6.1 inch)[Fingerprint Unlock Compatible] with Easy Installation Frame[Not for Pixel 6] 9H Hardness Clear Film Bubble Free
I like the case, it's nice and thin and has a good texture on the back. I might get something a little more bulky since I'm coming from a Pixel 5a with Otterbox Commuter, and I like the feeling of something more sturdy in my hand.
The screen protector worked out well. I initially had some trouble enrolling my right thumb, but on the second try it worked fine. However still some unregistered fingerprints can unlock my device... but I haven't got any OTA yet.
I bought Caseology and Spigen. Returned the Caseology, thought it didn't have enough grip. At least the Spigen has ribs the entire edge, much better grip.
is there a case to make the back of the phone flat? so the camera bump is leveled with the rest of the phone
manuel_soto said:
is there a case to make the back of the phone flat? so the camera bump is leveled with the rest of the phone
Click to expand...
Click to collapse
My Spigen Rugged Armor is flat.
Dont get the iVolar, FP scanner stops reading prints after installation (even when I deleted my registered prints).