Database Info

Need help, T-Mobile Device (bypassed with international)

I flashed International Firmware
I flashed DP3
OEM UNLOCKED (No Service--- Expected)
Ok now I need to flash a custom rom to get service back which means... flashing TWRP....
Try booting TWRP img nope doesn't work
I talk to people in TWRP they said its because fastboot commands arn't present on DP3 and to download magisk manager and patch a stock boot img.
Grabbed stock IMG from 9.5.10: https://androidfilehost.com/?w=files&flid=294812
moved to Phone, Patched with Magisk Manager, Moved back to pc
adb reboot fastboot
fastboot boot magisk_patched.img (FAILED)
fastboot flash boot magisk_patched.img (Successful)
fastboot reboot
Bootloader (select start option)
Loops into bootloader
Select Recovery
Loops into bootloader
I am literally losing my mind.
I've been trying to get TWRP/ROOT for almost 4 hours I'm starting to Crack someone please dear god help me.

Did you try msm back to stock and start over?
Its a bit of extra work, but it usually works for a non-expert like me when I'm beyond my knowledge.
Also, iirc there's no reason to flash magisk if you're going to flash twrp cuz twrp unroots the device?
I would try msm back to international > unlock bootloader > fastboot flash boot twrp.img > flash twrp installer in twrp > flash magisk in twrp > flash your new rom in twrp.

sydsick42069 said:
Did you try msm back to stock and start over?
Its a bit of extra work, but it usually works for a non-expert like me when I'm beyond my knowledge.
Also, iirc there's no reason to flash magisk if you're going to flash twrp cuz twrp unroots the device?
I would try msm back to international > unlock bootloader > fastboot flash boot twrp.img > flash twrp installer in twrp > flash magisk in twrp > flash your new rom in twrp.
Click to expand...
Click to collapse
You can't flash TWRP from adb on DP3
:/ gives error command

Virus1x said:
You can't flash TWRP from adb on DP3
:/ gives error command
Click to expand...
Click to collapse
So as said before use the msm download tool and start over

Virus1x said:
You can't flash TWRP from adb on DP3
:/ gives error command
Click to expand...
Click to collapse
Right, that's why I was suggesting you msm back to international which would put you on 9.5.3(?)
From there you can unlock your boot loader, flash twrp and magisk, and then flash your rom
https://forum.xda-developers.com/oneplus-7-pro/how-to/how-to-convert-tmobile-op7-to-t3935947

sydsick42069 said:
Right, that's why I was suggesting you msm back to international which would put you on 9.5.3(?)
From there you can unlock your boot loader, flash twrp and magisk, and then flash your rom
https://forum.xda-developers.com/oneplus-7-pro/how-to/how-to-convert-tmobile-op7-to-t3935947
Click to expand...
Click to collapse
Unless your using DP3
so even though I can be on international, Without DP3 you can't bootloader unlock.
You can't unlock the bootloader on T-Mobile phones.

Virus1x said:
Unless your using DP3
so even though I can be on international, Without DP3 you can't bootloader unlock.
You can't unlock the bootloader on T-Mobile phones.
Click to expand...
Click to collapse
I'm not sure where you got that info, but it's definitely wrong.
Tmobile has a standard unlocking procedure, or you can utilize something like this or this if your device is not paid off yet.
However... if you are attempting the dp3 unlock method found here, and as of right now you are still locked, its because you skipped the actual unlock procedure. Which is literally steps 1 & 2 in this guide, attached in the previous dp3 unlock guide.

https://forum.xda-developers.com/on...obile-one-plus-7-pro-msm-tool-revert-t3936528
Step 1- Download the file in the original post, create a folder somewhere you know where it is and extract the downloaded files to that folder
Step 2-Turn off your OP7 Pro
Step 3-Open the folder you created and right click on MsMDownloadTool V4.0.88.exe and select run as administrator, Once open uncheck sha256 check.
Step 4-Plug the Original USB cable that came with your phone into the phone.
Step-5-Hold the Power/Volume up/Volume down button until you see Connected in MsMDownloadTool, the instant you see Connected press start. You only have 5 seconds before it's too late so be quick.
Step-6 Once you see "Download Complete" in green in the Status of Communication box in MsMDownloadTool the phone will automatically reboot and you should have the TMobile splash screen and be able to set the phone up through the set up Wizard.

If you want to use Android 10 with service working on your T-Mobile 7 Pro you NEED to be SIM unlocked.

sydsick42069 said:
From there you can unlock your boot loader, flash twrp and magisk, and then flash your rom
Click to expand...
Click to collapse
That process doesn't work for Android 10 (OB1 and OB2). With OB1/2 the fastboot boot command doesn't work yet (similar to all the 7 Pro devices when it was first released). As the top poster already mentioned the correct method to get TWRP on the device is to flash a patch boot image. Form there, he can flash TWRP within Magisk.

redpoint73 said:
That process doesn't work for Android 10 (OB1 and OB2). With OB1/2 the fastboot boot command doesn't work yet (similar to all the 7 Pro devices when it was first released). As the top poster already mentioned the correct method to get TWRP on the device is to flash a patch boot image. Form there, he can flash TWRP within Magisk.
Click to expand...
Click to collapse
"From that point" would have been 9.5.3 international not 10, and I was assuming he was already carrier unlocked.

Virus1x said:
You can't flash TWRP from adb on DP3
:/ gives error command
Click to expand...
Click to collapse
Right. What you need to do now is download the full latest ota, put it on root of storage. Do local upgrade. After it will boot into stock recovery do a full wipe. Reboot. Then you can install twrp, magisk..ect
This way worked for me ^
(I'm not sim unlocked btw)
If you use msm it will relock your bootloader!

JWnSC said:
Right. What you need to do now is download the full latest ota, put it on root of storage. Do local upgrade. After it will boot into stock recovery do a full wipe. Reboot. Then you can install twrp, magisk..ect
This way worked for me ^
(I'm not sim unlocked btw)
If you use msm it will relock your bootloader!
Click to expand...
Click to collapse
Is there some benefit to keeping the sim locked? Getting the sim unlocked is so easy. Then you don't have to worry about the bootloader relocking, cuz you can just fastboot unlock it.

sydsick42069 said:
Is there some benefit to keeping the sim locked? Getting the sim unlocked is so easy. Then you don't have to worry about the bootloader relocking, cuz you can just fastboot unlock it.
Click to expand...
Click to collapse
No, no benefit. Less headache actually, no need to flash dp3 if sim unlocked already

JWnSC said:
No, no benefit. Less headache actually, no need to flash dp3 if sim unlocked already
Click to expand...
Click to collapse
Exactly, like why go through the trouble of using certain methods of upgrading, etc. to avoid relocking If you can just go to one of the unlocking threads on xda, or just talk to TMobile support on Twitter and get sim unlocked. Like the whole process took me 30 minutes and now I don't have to worry about it because it's officially unlocked. Like, I've had my **** in a boot loop a few times, and being able to msm all the way back to stock and reunlock etc is extremely useful.

Virus1x said:
I flashed International Firmware
I flashed DP3
OEM UNLOCKED (No Service--- Expected)
Ok now I need to flash a custom rom to get service back which means... flashing TWRP....
Try booting TWRP img nope doesn't work
I talk to people in TWRP they said its because fastboot commands arn't present on DP3 and to download magisk manager and patch a stock boot img.
Grabbed stock IMG from 9.5.10: https://androidfilehost.com/?w=files&flid=294812
moved to Phone, Patched with Magisk Manager, Moved back to pc
adb reboot fastboot
fastboot boot magisk_patched.img (FAILED)
fastboot flash boot magisk_patched.img (Successful)
fastboot reboot
Bootloader (select start option)
Loops into bootloader
Select Recovery
Loops into bootloader
I am literally losing my mind.
I've been trying to get TWRP/ROOT for almost 4 hours I'm starting to Crack someone please dear god help me.
Click to expand...
Click to collapse
Download something called "minimal adb and fastboot" (don't have the link handy) and use that fastboot to do the following:
fastboot getvar current-slot
Whichever slot it shows, a or b, you want to switch to the other. So if it says the current slot is A, you would type
fastboot --set-active=b
And if it says slot B, then you want to set A as active slot. Then after it successfully changes slots
fastboot reboot-bootloader
Now when you're back to the fastboot screen after your phone reboots, the fastboot boot command on your twrp img should work fine.
Sent from my OnePlus7Pro using XDA Labs

Re-lock bootloader without OEM unlocking

It's been 7 days since I came back to stock already and OEM unlocking is still greyed out. Is there any way to force it true so I can relock bootloader? That happened when I first tried to unlock bootloader, but I could allow it in like 4 days
If you wanna know reasons I tried installing Custom ROMs, and on the one successful installation (AOSP Extended) it's bugged so I returned to stock and kept on trying to install CrDroid, but one day it just stopped recognizing SIMs. (After some time on stock being able to)
・It can't be a number block, since it still works on another Custom ROM+Magisk Phone
・And I'm not sure if an IMEI block would mess with a SIM from another carrier that's never touched a rooted phone. (I tested both SIMs on both slots)
・That same SIM (my original one) stopped working on an unrooted G7 Play too
・Also I can't check any of my 2 IMEIs on settings, though I could retrieve IMEI1 through "fastboot getvar all"

Hyoretsu said:
It's been 7 days since I came back to stock already and OEM unlocking is still greyed out. Is there any way to force it true so I can relock bootloader? That happened when I first tried to unlock bootloader, but I could allow it in like 4 days
If you wanna know reasons I tried installing Custom ROMs, and on the one successful installation (AOSP Extended) it's bugged so I returned to stock and kept on trying to install CrDroid, but one day it just stopped recognizing SIMs. (After some time on stock being able to)
・It can't be a number block, since it still works on another Custom ROM+Magisk Phone
・And I'm not sure if an IMEI block would mess with a SIM from another carrier that's never touched a rooted phone. (I tested both SIMs on both slots)
・That same SIM (my original one) stopped working on an unrooted G7 Play too
・Also I can't check any of my 2 IMEIs on settings, though I could retrieve IMEI1 through "fastboot getvar all"
Click to expand...
Click to collapse
What does getvar all say are the codename and software channel?
Sent from my perry_f using XDA Labs

sd_shadow said:
What does getvar all say are the codename and software channel?
Sent from my perry_f using XDA Labs
Click to expand...
Click to collapse
I didn't find those specifically, but it's ocean XT1955-1 and RETBR (product/board and sku, and ro.carrier) Tried reflashing NHLOS.bin, erasing modem and flashing FSG today, didn't work and I never ran "fastboot erase all" too (by not working I mean the phone doesn't recognize a SIM is in the tray, I don't even have the emergency calls only message)
Re-flashed stock around 4 times a week ago or so, the only thing I didn't do was relock bootloader since I'm unable to
Here's the full output of getvar all if needed. (that's not the actual IMEI that's output'd) Also between those tries I sometimes could get device ID to show up instead of bad key, no idea why though
Brazil also has a site from ANATEL, the organization that manages product quality, authenticity, restrictions, user things and such, (All devices need to pass through a check from them) that allows us to see if IMEI has any restrictions (It shows if the IMEI is blocked, at least "Informed IMEI is banned by loss or theft" on a video I saw), mine has "Until now, the IMEI has no restrictions on use"

Hyoretsu said:
I didn't find those specifically, but it's ocean XT1955-1 and RETBR (product/board and sku, and ro.carrier) Tried reflashing NHLOS.bin, erasing modem and flashing FSG today, didn't work and I never ran "fastboot erase all" too (by not working I mean the phone doesn't recognize a SIM is in the tray, I don't even have the emergency calls only message)
Re-flashed stock around 4 times a week ago or so, the only thing I didn't do was relock bootloader since I'm unable to
Here's the full output of getvar all if needed. (that's not the actual IMEI that's output'd) Also between those tries I sometimes could get device ID to show up instead of bad key, no idea why though
Brazil also has a site from ANATEL, the organization that manages product quality, authenticity, restrictions, user things and such, (All devices need to pass through a check from them) that allows us to see if IMEI has any restrictions (It shows if the IMEI is blocked, at least "Informed IMEI is banned by loss or theft" on a video I saw), mine has "Until now, the IMEI has no restrictions on use"
Click to expand...
Click to collapse
Did you check the flashfile.xml
For the official flash commands?
Sent from my Moto E (4) using Tapatalk

sd_shadow said:
Did you check the flashfile.xml
For the official flash commands?
Sent from my Moto E (4) using Tapatalk
Click to expand...
Click to collapse
https://pastebin.com/X5TD77YS As far as I remember (just downloaded firmware file on phone) they're the same from the eraseandupdate.bat I was using
EDIT: Yeah, aside from it erasing modemst1 and modemst2 after flashing everything as opposed to after flashing FSG and reflashing FSG after that it's the same commands

Hyoretsu said:
OEM unlocking is still greyed out.
Click to expand...
Click to collapse
OEM unlock toggle is greyed out as long as your bootloader is unlocked, Magisk is not installed and you run the stock rom. That's quite normal. You must relock the bootloader to activate it. On my Moto g6 plus you find an info text there that this option is deactivated because the bootloader is already unlocked.

WoKoschekk said:
OEM unlock toggle is greyed out as long as your bootloader is unlocked, Magisk is not installed and you run the stock rom. That's quite normal. You must relock the bootloader to activate it. On my Moto g6 plus you find an info text there that this option is deactivated because the bootloader is already unlocked.
Click to expand...
Click to collapse
Though all my attempts at installing only Magisk lead to a bootloop and Custom ROMs either didn't work or I spent multiple days trying to install, only being successful once. I tried relocking the bootloader, but it says I gotta check that option to do it (mine says it's already unlocked too)

Hyoretsu said:
Though all my attempts at installing only Magisk lead to a bootloop and Custom ROMs either didn't work or I spent multiple days trying to install, only being successful once. I tried relocking the bootloader, but it says I gotta check that option to do it (mine says it's already unlocked too)
Click to expand...
Click to collapse
Usually that error is caused from using the wrong relocking commands
Are you using
Code:
fastboot oem lock begin
fastboot oem lock begin
fastboot oem lock
fastboot oem lock
fastboot oem lock
fastboot flash boot boot.img
fastboot oem lock

And mine is greyed out too

Hyoretsu said:
Though all my attempts at installing only Magisk lead to a bootloop and Custom ROMs either didn't work or I spent multiple days trying to install, only being successful once. I tried relocking the bootloader, but it says I gotta check that option to do it (mine says it's already unlocked too)
Click to expand...
Click to collapse
Did you try to install Magisk via TWRP? Maybe older versions will work like v19.3... On my Moto g6 v20.3 leads to a bootloop, too. But v19.3 runs without any problems. Maybe it's worth a try.
I red that it's necessary to run the oem lock command a few times to make it work.

sd_shadow said:
Usually that error is caused from using the wrong relocking commands
Are you using
Code:
fastboot oem lock begin
fastboot oem lock begin
fastboot oem lock
fastboot oem lock
fastboot oem lock
fastboot flash boot boot.img
fastboot oem lock
Click to expand...
Click to collapse
I actually thought this was it, but no, I was using this thread, which has the same commands, and still got the error (2x, then 3x, reflash boot.img and oem lock)
WoKoschekk said:
Did you try to install Magisk via TWRP? Maybe older versions will work like v19.3... On my Moto g6 v20.3 leads to a bootloop, too. But v19.3 runs without any problems. Maybe it's worth a try.
Click to expand...
Click to collapse
Installing Magisk on TWRP bootable, since installing TWRP would bootloop too. Didn't try older versions though, but I might try re-writing my IMEI first, who knows if that'll work. Being able to successfully relock bootloader without a working SIM wouldn't do much good, since I'd have to format the phone to try anything afterwards.

Hyoretsu said:
I actually thought this was it, but no, I was using this thread, which has the same commands, and still got the error (2x, then 3x, reflash boot.img and oem lock)
Installing Magisk on TWRP bootable, since installing TWRP would bootloop too. Didn't try older versions though, but I might try re-writing my IMEI first, who knows if that'll work. Being able to successfully relock bootloader without a working SIM wouldn't do much good, since I'd have to format the phone to try anything afterwards.
Click to expand...
Click to collapse
Did you try to install TWRP with the .zip provided by twrp.me? This .zip flashes the ramdisk inside the boot.img as Magisk does. So first you must install TWRP and after that you must install Magisk. Ignoring this order causes a bootloop because the twrp.zip overwrites Magisk! The twrp.zip flashes a complete new ramdisk while Magisk patches only some parts of it.
I loose my IMEI on my Moto g6 plus, too. You won't be able to overwrite it because it is linked with your device and encrypted by Motorola. The location of these files is /persist/rfs.
If your IMEI is broken or corrupt you won't be able to restore it. Except you have a backup of your persist partition.
---------- Post added at 09:31 PM ---------- Previous post was at 09:25 PM ----------
Try to relock your bootloader with the command provided in the screenshot (source: https://source.android.com/setup/build/running)
Screenshot
https://ibb.co/f2LzMzS

WoKoschekk said:
Did you try to install TWRP with the .zip provided by twrp.me? This .zip flashes the ramdisk inside the boot.img as Magisk does. So first you must install TWRP and after that you must install Magisk. Ignoring this order causes a bootloop because the twrp.zip overwrites Magisk! The twrp.zip flashes a complete new ramdisk while Magisk patches only some parts of it.
Click to expand...
Click to collapse
I get a bootloop when I install TWRP alone and when I install Magisk from bootable TWRP, been using the official one from twrp.me this whole time since the screen is bugged on unofficial one. I only ever installed both (in that order) when I was still trying to install Custom ROMs, but I kept getting bootloops for other reasons.

Do t even use twrp. Just install Magisk Manager and then patch a copy of the boot image from the firmware you installed.
So install Magisk Manager
Copy the boot image from the firmware that you installed to your phone.
Run Magisk Manager, click update Magisk and Select patch boot.img
Navigate to the folder on you phone that you copied the boot image to
Wait until Magisk Manager patches it
Copy Patched_boot.img to your adb folder on your PC
From your PC command prompt:
adb reboot bootloader
Then
fastboot devices
If your phone serial # shows, then:
fastboot flash boot patched_boot.img
fastboot reboot
You should now have root and the unlock bootloader option in developer settings will not be greyed out.
There is another thread with these same instructions. That is what allowed me to relock my bootloader.
Sent from my moto g(7) power using Tapatalk

Also,
Now that you are able to relock your bootloader, you could hold off until 10 is out.
If you don't like the unlocked bootloader message on startup, flash the attached logo.img fileView attachment BootLogo_mg7p.zip
Sent from my moto g(7) power using Tapatalk

MrCamby said:
Do t even use twrp. Just install Magisk Manager and then patch a copy of the boot image from the firmware you installed.
So install Magisk Manager
Copy the boot image from the firmware that you installed to your phone.
Run Magisk Manager, click update Magisk and Select patch boot.img
Navigate to the folder on you phone that you copied the boot image to
Wait until Magisk Manager patches it
Copy Patched_boot.img to your adb folder on your PC
From your PC command prompt:
adb reboot bootloader
Then
fastboot devices
If your phone serial # shows, then:
fastboot flash boot patched_boot.img
fastboot reboot
You should now have root and the unlock bootloader option in developer settings will not be greyed out.
There is another thread with these same instructions. That is what allowed me to relock my bootloader.
Sent from my moto g(7) power using Tapatalk
Click to expand...
Click to collapse
Ty, this was the only way in which I could get root in stock. Although the Allow OEM Unlock is still greyed out it now has the same message as before I unlocked the bootloader for the first time, though if it acts the same way it'll be available in a few days. IMEIs and SIMs still aren't working though, but eh. At least I can try testing the locking bootloader theory to get them working again (IMEI not working = can't even see any of them in settings)
MrCamby said:
Also, now that you are able to relock your bootloader, you could hold off until 10 is out.
Click to expand...
Click to collapse
Also Motorola still allows unlocked users to receive OTA for some reason, my device updated and it's still working

To repair your IMEI on a G7 power, this is what worked for me:
Remove your sim card.
Pull NON-HLOS.bin and fsg.mbn from the firmware that was flashed on the phone.
Startup in bootloader mode:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
Reboot phone. Once it is back up, powerdown, put sim card back in and start back up.
Sent from my moto g(7) power using Tapatalk

MrCamby said:
To repair your IMEI on a G7 power, this is what worked for me:
Remove your sim card.
Pull NON-HLOS.bin and fsg.mbn from the firmware that was flashed on the phone.
Startup in bootloader mode:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
Reboot phone. Once it is back up, powerdown, put sim card back in and start back up.
Click to expand...
Click to collapse
No luck unfortunately, still don't have IMEI/SIM. Once I can I'll try relocking bootloader and maybe sending it to warranty, since apparently using a tool to re-write IMEI won't work on this phone. (Followed to the T, unless unlocking it after flashing and waiting for microSD messes it up)

Did you try the LMSA software to try and fix it. There are two options: update and repair.
Sent from my moto g(7) power using Tapatalk

MrCamby said:
Did you try the LMSA software to try and fix it. There are two options: update and repair.
Click to expand...
Click to collapse
I tried using it back when I was trying to go back to stock "the right way" (to try and solve the lost IMEI, go back stock and re-lock bootloader) but it couldn't even recognize my phone so that I could download anything

Coming from an OP3T need help regarding the new partitions

I own a 3T currently and am planning to get an 8T as it is getting good custom rom traction. One thing I am really confused about the is the new partitioning scheme. Can someone please link me an article where I can read more about it? Also what's with the specific twrp's and installer zips for each rom and how does one flash magisk, xposed and other things?
What I am used to doing on my 3t is, wipe data, system, cache and then flash rom zip + gapps + magisk. I would really appreciate it if anyone can explain the additional steps that would be required to do this on the 8T

It's a very different world with the 8T (I also come from a 3T).
The 8T has A/B partitions as well as virtual A/B partitions. It also supports streaming OTA and seamless OTA updates. It has fastboot and fastbootd.
There's lots of good information on all of this in:
Virtual A/B Overview | Android Open Source Project
source.android.com
A/B (Seamless) System Updates | Android Open Source Project
source.android.com
platform/system/update_engine - Git at Google
Moving Fastboot to Userspace | Android Open Source Project
source.android.com
And more on this at the same site.
And, if you get into serious trouble, the unbricking tool is really easy to use and works wonderfully.

pratyush28 said:
I own a 3T currently and am planning to get an 8T as it is getting good custom rom traction. One thing I am really confused about the is the new partitioning scheme. Can someone please link me an article where I can read more about it? Also what's with the specific twrp's and installer zips for each rom and how does one flash magisk, xposed and other things?
What I am used to doing on my 3t is, wipe data, system, cache and then flash rom zip + gapps + magisk. I wouls really appreciate it if anyone can explain the additional steps that would be required to do this on the same thing on an 8T.
Click to expand...
Click to collapse
I'm going to try to give you a brief, yet precise enough guide to doing the basics on a device with partitions like the 8T.
Okay, so basically, the 8T custom ROMs, when flashed, are going to consist of the following partitions:
boot
dtbo
system
system_ext
product
recovery
vendor
odm
vbmeta
vbmeta_system
So when performing fastboot/adb commands with these newer devices, you're going to start off in the normal bootloader (i use the volume +/- and power at the same time command to enter this from a powered off state).
Now there's also a mode called fastbootd mode. It's often just called fastboot, especially when booting from bootloader (fastboot reboot fastboot now takes you to this fastbootd mode). This is where you're going to do the majority of flashing/modding from.
So to start off, enter bootloader, then perform this command in terminal to do a wipe of data:
fastboot -w
Then, flash recovery partition:
fastboot flash recovery recovery.img (this is the recovery.img from the ROM zip you are attempting to flash)
Then, reboot to fastbootd:
fastboot reboot fastboot
Next, I like to make sure I'm on partition A for flashing. This is just something I've been told to do and it works so I stick with it. So do this by:
fastboot set_active a
Now you can start flashing the paritions:
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash system system.img
fastboot flash system_ext system_ext.img
fastboot flash product product.img
fastboot flash vendor vendor.img
fastboot flash odm odm.img
fastboot flash vbmeta vbmeta.img
fastboot flash vbmeta_system vbmeta_system.img
Then, boot up the ROM:
fastboot reboot
So that's the basic rundown.
Now for a few things to keep in mind:
Always make sure you're on the latest version of OxygenOS before doing any of this. I like to start off by unlocking bootloader, then setting up phone. Then I do an update to both partitions to the latest version of OOS (must be on both partitions. Not just on one). So I just put the latest OOS zip on my phone via USB transfer from PC, do an upgrade with that file (Settings > System > Update > Top right menu button > Select Internal Storage or whatever it says like that, then select the file (make sure the OOS zip file is in the MAIN root directory of your phone. So basically, the folder that contains the Pictures, Downloads, Music, etc. folders.
So after you do this system update, it will prompt you to reboot phone. Do this. Then, go to settings and do the same thing again. Select the OOS zip and do an internal storage update, let it do its thing, it'll ask to reboot, go ahead and do so. Now this second update you do will either start from 0% and go to 100% like the first time, or it will go from 0% directly to 99%, then 100% after a few seconds. This is okay, it just means you already had the latest OOS on one of your partitions. So anyway, go ahead and do that reboot when it tells you. Now you are unlocked and on the latest firmware and ready to flash.
Oh, and btw, to unlock bootloader, do the normal steps through developer options, then reboot to bootloader and this is the command used:
fastboot flashing unlock
That will let you confirm to unlock bootloader, etc. like I'm sure you've done on the 3T.
So anyway, after unlocking and updating to latest OOS (Open Beta or Stable usually both work fine btw), you can reboot to bootloader, then do the steps I told you above for wiping, flashing recovery, flashing partitions, booting, etc.
Oh, and to get these partition images from the custom ROM zip you choose to flash, you need to first unzip the ROM zip file, then take the payload.bin file that will result of the unzip, and use a payload_dumper script. Those are linked all over or can be found on a google search or Github. It'll take your payload.bin and turn it into these .IMG files that I list in the flashing steps. Each partition will have a file named PARTITIONNAME.img. These are all you need to flash a custom ROM over OOS.
To flash an update to a rom, do all the same stuff but don't do the
fastboot -w
and you also don't need to do the
fastboot flash recovery recovery.img
part because the recovery partition is already there from the ROM when you originally flashed.
I realize this is all a bunch of random notes and guides, and my brain kind of works in a weird way, but it's pretty much all there I think. If you need help clarifying any of this or just have any questions in general, PM me or respond back here and tag me. I'll help as much as I can or point you to someone who can help if I can't.
Hope this helps. Take care.

dpryor88 said:
I'm going to try to give you a brief, yet precise enough guide to doing the basics on a device with partitions like the 8T.
Okay, so basically, the 8T custom ROMs, when flashed, are going to consist of the following partitions:
boot
dtbo
system
system_ext
product
recovery
vendor
odm
vbmeta
vbmeta_system
So when performing fastboot/adb commands with these newer devices, you're going to start off in the normal bootloader (i use the volume +/- and power at the same time command to enter this from a powered off state).
Now there's also a mode called fastbootd mode. It's often just called fastboot, especially when booting from bootloader (fastboot reboot fastboot now takes you to this fastbootd mode). This is where you're going to do the majority of flashing/modding from.
So to start off, enter bootloader, then perform this command in terminal to do a wipe of data:
fastboot -w
Then, flash recovery partition:
fastboot flash recovery recovery.img (this is the recovery.img from the ROM zip you are attempting to flash)
Then, reboot to fastbootd:
fastboot reboot fastboot
Next, I like to make sure I'm on partition A for flashing. This is just something I've been told to do and it works so I stick with it. So do this by:
fastboot set_active a
Now you can start flashing the paritions:
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash system system.img
fastboot flash system_ext system_ext.img
fastboot flash product product.img
fastboot flash vendor vendor.img
fastboot flash odm odm.img
fastboot flash vbmeta vbmeta.img
fastboot flash vbmeta_system vbmeta_system.img
Then, boot up the ROM:
fastboot reboot
So that's the basic rundown.
Now for a few things to keep in mind:
Always make sure you're on the latest version of OxygenOS before doing any of this. I like to start off by unlocking bootloader, then setting up phone. Then I do an update to both partitions to the latest version of OOS (must be on both partitions. Not just on one). So I just put the latest OOS zip on my phone via USB transfer from PC, do an upgrade with that file (Settings > System > Update > Top right menu button > Select Internal Storage or whatever it says like that, then select the file (make sure the OOS zip file is in the MAIN root directory of your phone. So basically, the folder that contains the Pictures, Downloads, Music, etc. folders.
So after you do this system update, it will prompt you to reboot phone. Do this. Then, go to settings and do the same thing again. Select the OOS zip and do an internal storage update, let it do its thing, it'll ask to reboot, go ahead and do so. Now this second update you do will either start from 0% and go to 100% like the first time, or it will go from 0% directly to 99%, then 100% after a few seconds. This is okay, it just means you already had the latest OOS on one of your partitions. So anyway, go ahead and do that reboot when it tells you. Now you are unlocked and on the latest firmware and ready to flash.
Oh, and btw, to unlock bootloader, do the normal steps through developer options, then reboot to bootloader and this is the command used:
fastboot flashing unlock
That will let you confirm to unlock bootloader, etc. like I'm sure you've done on the 3T.
So anyway, after unlocking and updating to latest OOS (Open Beta or Stable usually both work fine btw), you can reboot to bootloader, then do the steps I told you above for wiping, flashing recovery, flashing partitions, booting, etc.
Oh, and to get these partition images from the custom ROM zip you choose to flash, you need to first unzip the ROM zip file, then take the payload.bin file that will result of the unzip, and use a payload_dumper script. Those are linked all over or can be found on a google search or Github. It'll take your payload.bin and turn it into these .IMG files that I list in the flashing steps. Each partition will have a file named PARTITIONNAME.img. These are all you need to flash a custom ROM over OOS.
To flash an update to a rom, do all the same stuff but don't do the
fastboot -w
and you also don't need to do the
fastboot flash recovery recovery.img
part because the recovery partition is already there from the ROM when you originally flashed.
I realize this is all a bunch of random notes and guides, and my brain kind of works in a weird way, but it's pretty much all there I think. If you need help clarifying any of this or just have any questions in general, PM me or respond back here and tag me. I'll help as much as I can or point you to someone who can help if I can't.
Hope this helps. Take care.
Click to expand...
Click to collapse
I cannot thank you enough for taking out so much time and explaining everything in detail. I really appreciate it and this will be very very helpful for me.
Unfortunately, I purchased the 8T from OnePlus' official website and they sent me a refurbished piece with a cracked back panel and scratched screen. I was stupid to opt for OnePlus' site just because there was a small discount, now to get a replacement I have to go through a painful process of contacting their incompetent support and an eternal wait until they decide to revert. I'm glad that I recorded the unboxing video, so at least they cannot blame this on me.

pratyush28 said:
I cannot thank you enough for taking out so much time and explaining everything in detail. I really appreciate it and this will be very very helpful for me.
Unfortunately, I purchased the 8T from OnePlus' official website and they sent me a refurbished piece with a cracked back panel and scratched screen. I was stupid to opt for OnePlus' site just because there was a small discount, now to get a replacement I have to go through a painful process of contacting their incompetent support and an eternal wait until they decide to revert. I'm glad that I recorded the unboxing video, so at least they cannot blame this on me.
Click to expand...
Click to collapse
Ah man! I'm so sorry to hear that! Their support is horrible I must admit. Not as bad as Google Fi's support haha (that's another story), but it's bad yeah.
I got mine from the OP website also (North America model as I live in California) but I got it shortly after the phone was released. I can't believe they're selling refurbished, broken devices now. That's horrible. The company has been going a bit downhill with some aspects I've realized in the past few years.
Anyway, I really hope you get that sorted out (sooner than later hopefully). It's a nice device. Software support/updates are a little iffy with OP these days, but no one's perfect. But once you start flashing some custom goodness on the phone, it really shines. Nothing wrong with Oxygen in my opinion, but choice is nice
Let me know if/when you get the device if you need any help with anything.

dpryor88 said:
Ah man! I'm so sorry to hear that! Their support is horrible I must admit. Not as bad as Google Fi's support haha (that's another story), but it's bad yeah.
I got mine from the OP website also (North America model as I live in California) but I got it shortly after the phone was released. I can't believe they're selling refurbished, broken devices now. That's horrible. The company has been going a bit downhill with some aspects I've realized in the past few years.
Anyway, I really hope you get that sorted out (sooner than later hopefully). It's a nice device. Software support/updates are a little iffy with OP these days, but no one's perfect. But once you start flashing some custom goodness on the phone, it really shines. Nothing wrong with Oxygen in my opinion, but choice is nice
Let me know if/when you get the device if you need any help with anything.
Click to expand...
Click to collapse
Thanks mate, I won't hesitate to ask if I need help once I get the new device

@dpryor88 Finally after a 21 day battle with the OnePlus support, today I received my replacement device.
It happens to have LPDDR5 ram. I checked this xda article where they mentioned that the unbrick tool fails on this variant.
https://www.xda-developers.com/oneplus-8t-oneplus-9r-shipping-faster-ram/amp/
Which variant do you have? Also, did you try using the unbrick tool?

pratyush28 said:
@dpryor88 Finally after a 21 day battle with the OnePlus support, today I received my replacement device.
It happens to have LPDDR5 ram. I checked this xda article where they mentioned that the unbrick tool fails on this variant.
https://www.xda-developers.com/oneplus-8t-oneplus-9r-shipping-faster-ram/amp/
Which variant do you have? Also, did you try using the unbrick tool?
Click to expand...
Click to collapse
I have the other model. Unbrick tool works fine on mine.

pratyush28 said:
@dpryor88 Finally after a 21 day battle with the OnePlus support, today I received my replacement device.
It happens to have LPDDR5 ram. I checked this xda article where they mentioned that the unbrick tool fails on this variant.
https://www.xda-developers.com/oneplus-8t-oneplus-9r-shipping-faster-ram/amp/
Which variant do you have? Also, did you try using the unbrick tool?
Click to expand...
Click to collapse
My 8T has ddr_type of 1 and I've had no problems using the unbrick tool (and I've used it a lot as I've been testing/learning lots of stuff with TWRP) on my KB2000.

BillGoss said:
My 8T has ddr_type of 1 and I've had no problems using the unbrick tool (and I've used it a lot as I've been testing/learning lots of stuff with TWRP) on my KB2000.
Click to expand...
Click to collapse
That's some good news, mine is KB2001 I wonder if that will make a difference. Also, have you tried flashing custom roms? If yes, was there any firmware incompatibility?

pratyush28 said:
That's some good news, mine is KB2001 I wonder if that will make a difference. Also, have you tried flashing custom roms? If yes, was there any firmware incompatibility?
Click to expand...
Click to collapse
Yes, I installed a couple of custom ROMs and they were fine.
The only place I know that matters is the xbl and xbl_config partitions. The full OOS ROMs have an extra -lp5 set of files that get flashed on lp5 phones instead of the "normal" xbl files.
But since this only applies to firmware and the xbl partitions are never touched by custom ROMs, there cannot, therefore, be incompatibilities due to lp4 vs lp5.

Cannot get oem unlock token oneplus 8 tmobile (in2017)

So I purchased a tmobile op8 and it arrived yesterday, after setting up the phone and network unlocking (which happened basically instantaneously after applying for it which i found odd), I am currently trying to unlock bootloader in the hopes of converting it to the international firmware. I am on software version 11.0.5.7.IN55CB
The problem I am facing is that whenever i try to do "adb devices" while the phone is powered on it works and lists it, but when the phone is in fastboot mode it does not list the device. Also when i do "fastboot oem get_unloock_code" it gets stuck at waiting for devices. I have read through numerous posts both here and on the op forums talking about this and some listed solutions such as going into windows optional updates and updating google bootloader or something, while others said to check that bootloader is unlocked (i did both and didnt work). Any tips? Also, could someone please link to the correct adb and driver downloads as I am getting mixed results when searching which is the correct download.

Just need to update drivers friend. Follow carefully.
1. Download Google fastboot drivers, unzip to get "usb_driver" folder
2. Right click file "android_winusb" and select install. Press OK on confirmation dialog.
3. Boot phone into fastboot, and connect to PC
4. Open the device manager on PC, and look for android device. Should have an orange triangle next to it
5. Right click that -> Update driver -> Browse my computer -> let me pick from a list -> Android Bootloader Interface
After success message fastboot commands will work. I'd also recommend using the lastest Fastboot Tools from Google if you have any more issues.
Have fun waiting 1-2 weeks for your unlock_code.bin file. F&^% T-Mobile lmao.

FoxyDrew said:
Just need to update drivers friend. Follow carefully.
1. Download Google fastboot drivers, unzip to get "usb_driver" folder
2. Right click file "android_winusb" and select install. Press OK on confirmation dialog.
3. Boot phone into fastboot, and connect to PC
4. Open the device manager on PC, and look for android device. Should have an orange triangle next to it
5. Right click that -> Update driver -> Browse my computer -> let me pick from a list -> Android Bootloader Interface
After success message fastboot commands will work. I'd also recommend using the lastest Fastboot Tools from Google if you have any more issues.
Have fun waiting 1-2 weeks for your unlock_code.bin file. F&^% T-Mobile lmao.
Click to expand...
Click to collapse
Thanks, worked like a charm. Now to wait 7 business days fml

if you just want the bootloader unlocked there's another way to do it instantly using EDL it's how I unlocked mine , instructions and files are here.. only works on Android 11 btw https://androidfilehost.com/?fid=7161016148664833753 if you really don't feel like installing edl and what not there is a Linux live distro that's already ready to go on the edl GitHub page you can download but just forewarning it's extremely glitchy and not used friendly lol if you need help , I can help you tho just lmk

PrivyetCyka said:
if you just want the bootloader unlocked there's another way to do it instantly using EDL it's how I unlocked mine , instructions and files are here.. only works on Android 11 btw https://androidfilehost.com/?fid=7161016148664833753 if you really don't feel like installing edl and what not there is a Linux live distro that's already ready to go on the edl GitHub page you can download but just forewarning it's extremely glitchy and not used friendly lol if you need help , I can help you tho just lmk
Click to expand...
Click to collapse
would i be able to convert to international firmware with this?
also at the end of instructions it states "***** i have not had any luck being able to flash custom roms onto this device even with it unlocked so be forewarned *****" Does this mean that only using this method does not allow for custom roms, or would waiting for tmobile unlock, converting to international firmware also not work with roms?
If roms dont work on this model even after flashing international firmware then im probably not even going to unlock lol

DamianF7 said:
would i be able to convert to international firmware with this?
also at the end of instructions it states "***** i have not had any luck being able to flash custom roms onto this device even with it unlocked so be forewarned *****" Does this mean that only using this method does not allow for custom roms, or would waiting for tmobile unlock, converting to international firmware also not work with roms?
If roms dont work on this model even after flashing international firmware then im probably not even going to unlock lol
Click to expand...
Click to collapse
i have t-m version and i have converted it to international software firmware also gets changed but by your self you won't be able to get 2 sim support because there is only one imei in phone. all the rom's work exacly the same as they do on global version not a single difference currently running a12 aex rom no problems at all

DamianF7 said:
would i be able to convert to international firmware with this?
also at the end of instructions it states "***** i have not had any luck being able to flash custom roms onto this device even with it unlocked so be forewarned *****" Does this mean that only using this method does not allow for custom roms, or would waiting for tmobile unlock, converting to international firmware also not work with roms?
If roms dont work on this model even after flashing international firmware then im probably not even going to unlock lol
Click to expand...
Click to collapse
don't forget to backup your persist.img there is some % chance it may get lost and you will have to recalibrate firngerprint sensor also back up the modem.img from twrp beacause that's has imei of your phone and if somehow you get your phone hardbricked that would be nice thing to have as a peace of mind

d.tat said:
don't forget to backup your persist.img there is some % chance it may get lost and you will have to recalibrate firngerprint sensor also back up the modem.img from twrp beacause that's has imei of your phone and if somehow you get your phone hardbricked that would be nice thing to have as a peace of mind
Click to expand...
Click to collapse
Can this be done without TWRP or does this have to be done after I root?

DamianF7 said:
Can this be done without TWRP or does this have to be done after I root?
Click to expand...
Click to collapse
you can backup persist without twrp. i'm sure modem could be backed up without twrp too but that's how i did it even tho i did not need persist nor modem image but i would suggest you do it anyways just to be safe booting into twrp in not hard at all you have to do is go info fastboot and through adb file boot into recovery ( fastboot boot "recovery" ) device will reboot in twrp and from there you just backup persist and modem take that file and save it on your computer
also important note for android 10 use twrp 3.4 and for android 11 use 3.6 and most importantly if you read the instructions on converting to global or installing twrp or custom rom carefully it will work 100% i was lazy and did it old way i used to do it on some other android phones and bricked few times but it was all good with msm tool you could restore phone from almost every state that's what made oneplus great

DamianF7 said:
Can this be done without TWRP or does this have to be done after I root?
Click to expand...
Click to collapse
no root needed to install or boot into twrp

d.tat said:
you can backup persist without twrp. i'm sure modem could be backed up without twrp too but that's how i did it even tho i did not need persist nor modem image but i would suggest you do it anyways just to be safe booting into twrp in not hard at all you have to do is go info fastboot and through adb file boot into recovery ( fastboot boot "recovery" ) device will reboot in twrp and from there you just backup persist and modem take that file and save it on your computer
also important note for android 10 use twrp 3.4 and for android 11 use 3.6 and most importantly if you read the instructions on converting to global or installing twrp or custom rom carefully it will work 100% i was lazy and did it old way i used to do it on some other android phones and bricked few times but it was all good with msm tool you could restore phone from almost every state that's what made oneplus great
Click to expand...
Click to collapse
Ok, thanks for clarification

FoxyDrew said:
Just need to update drivers friend. Follow carefully.
1. Download Google fastboot drivers, unzip to get "usb_driver" folder
2. Right click file "android_winusb" and select install. Press OK on confirmation dialog.
3. Boot phone into fastboot, and connect to PC
4. Open the device manager on PC, and look for android device. Should have an orange triangle next to it
5. Right click that -> Update driver -> Browse my computer -> let me pick from a list -> Android Bootloader Interface
After success message fastboot commands will work. I'd also recommend using the lastest Fastboot Tools from Google if you have any more issues.
Have fun waiting 1-2 weeks for your unlock_code.bin file. F&^% T-Mobile lmao.
Click to expand...
Click to collapse
Ive run into an issue with edl mode and you seem knowledgeable. I tried to flash the international firmware with an unlocked bootloader but it turned out to be an older build and now my phone is in crash dump mode. I planned on using msmtool to downgrade to android 10 and just restart but my phone isnt detected by my pc even though i have the qualcomm drivers installed. Any tips?
edit: btw can still access fastboot mode (download mode)
so phone is recognized in fastboot but not as qhusnhub or whatever its supposed to be, its just called oneplus android bootloader interface

DamianF7 said:
Ive run into an issue with edl mode and you seem knowledgeable. I tried to flash the international firmware with an unlocked bootloader but it turned out to be an older build and now my phone is in crash dump mode. I planned on using msmtool to downgrade to android 10 and just restart but my phone isnt detected by my pc even though i have the qualcomm drivers installed. Any tips?
edit: btw can still access fastboot mode (download mode)
so phone is recognized in fastboot but not as qhusnhub or whatever its supposed to be, its just called oneplus android bootloader interface
Click to expand...
Click to collapse
EDL mode can be tricky. This one's not a guarantee but it always works for me.
1. Download LinageOS recovery. Make sure you put it in your fastboot/platform-tools folder.
2. Flash that recovery in fastboot mode (unlock bootloader first if you need to) with the command "fastboot flash recovery lineage-18.1-20211218-recovery-instantnoodle.img"
3. Now boot into recovery, select advanced options, and enable ADB.
4. Now you have full adb access. Make sure you're plugged in and use this command on your PC. "adb reboot edl"
5. Check MSM, should be detected now if the right drivers are installed. If not, try combinations of different USB ports and different cables (you'd be surprised)
A lot of the tutorials on here on how to get a T-Mobile version to Global firmware are wonky methods or outdated, so let me know if you continue to have issue with that.

FoxyDrew said:
EDL mode can be tricky. This one's not a guarantee but it always works for me.
1. Download LinageOS recovery.
2. Flash recovery in fastboot mode (unlock bootloader first if you need to) with the command "fastboot flash recovery NAMEOFFILE.img"
3. Now boot into recovery, select advanced options, and enable ADB.
4. Now you have full adb access. Use this command "adb reboot edl"
5. Check MSM, should be detected now if the right drivers are installed. If not, try combinations of different USB ports and different cables (you'd be surprised)
A lot of the tutorials on here on how to get a T-Mobile version to Global firmware are wonky methods or outdated, so let me know if you continue to have issue with that.
Click to expand...
Click to collapse
Thanks for the reply man. Believe it or not this is exactly what I did lol. Got it working again and am now rooted on international oos 11.

FoxyDrew said:
Just need to update drivers friend. Follow carefully.
1. Download Google fastboot drivers, unzip to get "usb_driver" folder
2. Right click file "android_winusb" and select install. Press OK on confirmation dialog.
3. Boot phone into fastboot, and connect to PC
4. Open the device manager on PC, and look for android device. Should have an orange triangle next to it
5. Right click that -> Update driver -> Browse my computer -> let me pick from a list -> Android Bootloader Interface
After success message fastboot commands will work. I'd also recommend using the lastest Fastboot Tools from Google if you have any more issues.
Have fun waiting 1-2 weeks for your unlock_code.bin file. F&^% T-Mobile lmao.
Click to expand...
Click to collapse
Just wanted to say that this solved my issue of not being able to make it past the reboot into fastboot when flashing from TMo to Global using the flash-all.bat guides. I ran the batch file on a newly MSM'd 10.5.22 and when it got stuck at "waiting for device" I followed these steps and as soon as the driver was installed the batch file kicked back in and finished the flashing. Cheers!

SilverZero said:
Just wanted to say that this solved my issue of not being able to make it past the reboot into fastboot when flashing from TMo to Global using the flash-all.bat guides. I ran the batch file on a newly MSM'd 10.5.22 and when it got stuck at "waiting for device" I followed these steps and as soon as the driver was installed the batch file kicked back in and finished the flashing. Cheers!
Click to expand...
Click to collapse
Glad you got it man, worth all the trouble to get to a clean version of OOS without T-MO's junk and spying xD

FoxyDrew said:
EDL mode can be tricky. This one's not a guarantee but it always works for me.
1. Download LinageOS recovery. Make sure you put it in your fastboot/platform-tools folder.
2. Flash that recovery in fastboot mode (unlock bootloader first if you need to) with the command "fastboot flash recovery lineage-18.1-20211218-recovery-instantnoodle.img"
3. Now boot into recovery, select advanced options, and enable ADB.
4. Now you have full adb access. Make sure you're plugged on and use this command on your PC. "adb reboot edl"
5. Check MSM, should be detected now if the right drivers are installed. If not, try combinations of different USB ports and different cables (you'd be surprised)
A lot of the tutorials on here on how to get a T-Mobile version to Global firmware are wonky methods or outdated, so let me know if you continue to have issue with that.
Click to expand...
Click to collapse
Thanks SO MUCH for this!! This is the only thing that allowed me to get into EDL Mode. I'm a bit stuck using MSM though. It shows my device as connected, but when I click the "Target" dropdown O2 is not an option. The only option I see is TMO. Any ideas?
UPDATE: i was able to get MSM going. Selecting the target was not needed, just needed to reboot the phone into EDL again and quickly press Start.
I'm back to stock now and just unlocked my bootloader again.
I now have a follow up question: My goal is to install Pixel Experience on my OPO8. Do I need to flash the Global ROM first or can I go straight into Pixel Experience?
UPDATE 2: no matter what I try flashing to my device I always end up getting "not allowed" errors with the critical partition. I've done the fresh MSM process three times already and always end up hitting these critical partition errors when trying to flash the global rom (or any other rom for that matter). any ideas?

nmuntz said:
Thanks SO MUCH for this!! This is the only thing that allowed me to get into EDL Mode. I'm a bit stuck using MSM though. It shows my device as connected, but when I click the "Target" dropdown O2 is not an option. The only option I see is TMO. Any ideas?
UPDATE: i was able to get MSM going. Selecting the target was not needed, just needed to reboot the phone into EDL again and quickly press Start.
I'm back to stock now and just unlocked my bootloader again.
I now have a follow up question: My goal is to install Pixel Experience on my OPO8. Do I need to flash the Global ROM first or can I go straight into Pixel Experience?
UPDATE 2: no matter what I try flashing to my device I always end up getting "not allowed" errors with the critical partition. I've done the fresh MSM process three times already and always end up hitting these critical partition errors when trying to flash the global rom (or any other rom for that matter). any ideas?
Click to expand...
Click to collapse
Do you have a T-Mobile device? If so you SHOULD be selecting "TMO" from the dropdown in MSM. Not O2 or leaving it blank. If you don't have a T-Mobile device, your using the wrong MSM tool as TMO shouldn't be an option.
Did you unlock your bootloader after MSMing back to stock? MSM Tool will automatically lock your bootloader. Also what recovery are you using to try to flash ROMs?
Also PixelExperience is dead for op8 it stopped getting updates. I'd recommend HavocOS for a "Pixel Experience". Also a well polished ROM in general.

FoxyDrew said:
Do you have a T-Mobile device? If so you SHOULD be selecting "TMO" from the dropdown in MSM. Not O2 or leaving it blank. If you don't have a T-Mobile device, your using the wrong MSM tool as TMO shouldn't be an option.
Did you unlock your bootloader after MSMing back to stock? MSM Tool will automatically lock your bootloader. Also what recovery are you using to try to flash ROMs?
Also PixelExperience is dead for op8 it stopped getting updates. I'd recommend HavocOS for a "Pixel Experience". Also a well polished ROM in general.
Click to expand...
Click to collapse
I'm pretty sure that this is a T-Mobile device. It registers as IN2017 which matches the description of the phone I bought off amazon but not exactly sure how else can i verify this.
I did unlock the bootloader after MSMing back to stock. One thing I noticed is that the stock image that MSM flashed has Sprint branding and not T-Mobile. maybe i'm using the wrong MSM tool? I'm using the one from this guide
I just re-did MSM; this time selecting TMO and I still got Sprint branding. is this expected?
I've been trying with multiple recoverys: the stock one, TWRP and the one that pixelexperience had. The LineageOS one you provided I only used for doing the ADB thing to boot into EDL. What recovery do you recommend I use?
I did read about PixelExperience being dead so downloaded Havoc.
can you please confirm if I should be flashing the Global ROM before flashing HavocOS? regarding the critical partition errors any ideas whats causing those?
last question is regarding adb/fastboot - been reading different things about what version to use. been doing all my last experiments using the ones from https://developer.android.com/studio/releases/platform-tools but got the same results. sorry to spam you with so many questions - appreciate your help!

nmuntz said:
I'm pretty sure that this is a T-Mobile device. It registers as IN2017 which matches the description of the phone I bought off amazon but not exactly sure how else can i verify this.
I did unlock the bootloader after MSMing back to stock. One thing I noticed is that the stock image that MSM flashed has Sprint branding and not T-Mobile. maybe i'm using the wrong MSM tool? I'm using the one from this guide
I just re-did MSM; this time selecting TMO and I still got Sprint branding. is this expected?
I've been trying with multiple recoverys: the stock one, TWRP and the one that pixelexperience had. The LineageOS one you provided I only used for doing the ADB thing to boot into EDL. What recovery do you recommend I use?
I did read about PixelExperience being dead so downloaded Havoc.
can you please confirm if I should be flashing the Global ROM before flashing HavocOS? regarding the critical partition errors any ideas whats causing those?
last question is regarding adb/fastboot - been reading different things about what version to use. been doing all my last experiments using the ones from https://developer.android.com/studio/releases/platform-tools but got the same results. sorry to spam you with so many questions - appreciate your help!
Click to expand...
Click to collapse
I've never seen that MSM tool, but the one I use doesn't have any Sprint files at all. Not sure where you found that MSM but use this one for future reference.
No you don't need to flash global before a ROM.

[STOCK FIRMWARE][WINDOWS][OUTDATED] How to upgrade and clean wipe from Stock Android 10 to Stock Android 11 without OTA [Retail USA Channel]

NOTICE : As of June 15, 2022 you no longer NEED this method as the OTA for Android 11 has been released. This is here for those who don't get the OTA or need an upgrade from a clean reset manually using only the RSA tool.
Credits to : morpheus092511 over on the Lenovo Forums for tricking the Moto Tool into installing the stock firmware, and Chepr29 from the Lenovo Forums for the fastboot method that doesn't require the tool.
In fastboot on your PC after your extract the Android 11 firmware and have your device in recovery mode enter the following commands (back up your data this will clean wipe it!) :
Code:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash vbmeta vbmeta.img
fastboot flash radio radio.img
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dtbo dtbo.img
fastboot flash super super.img_sparsechunk.0
fastboot flash super super.img_sparsechunk.1
fastboot flash super super.img_sparsechunk.2
fastboot flash super super.img_sparsechunk.3
fastboot flash super super.img_sparsechunk.4
fastboot flash super super.img_sparsechunk.5
fastboot flash super super.img_sparsechunk.6
fastboot flash super super.img_sparsechunk.7
fastboot flash super super.img_sparsechunk.8
fastboot flash super super.img_sparsechunk.9
fastboot flash super super.img_sparsechunk.10
fastboot erase userdata
fastboot erase carrier
fastboot erase metadata
fastboot erase ddr
fastboot oem fb_mode_clear
fastboot reboot
1. BACK UP ANY IMPORTANT FILES OR INFORMATION! DON'T FORGET TO BACK UP YOUR TWO FACTOR AUTHENTICATION CODES AS WELL! This method can be done with other firmwares, but I have only tested a clean wipe upgrade from stock Android 10 to 11 RETUS on the Motorola One Ace 5G (Unlocked from Amazon) and can't comment on other firmwares.
2. Windows ONLY! DOWNLOAD THE RSA software from Motorola that allows you to recover, backup, or flash stock firmware to your device.
https://download.lenovo.com/lsa/Releases/Rescue_and_Smart_Assistant_v6.1.1.9_signed_setup.exe
3. DOWNLOAD the retail Android 11 firmware for the Motorola One Ace 5G (Kiev) Retail USA / Unlocked from here :
https://mirrors.lolinet.com/firmware/moto/kiev/official/RETUS/XT2113-2_KIEV_RETUS_11_RZK31.Q3-45-16_subsidy-DEFAULT_regulatory-DEFAULT_R8_CFC.xml.zip
4. Go to C:\ProgramData\RSA\Download\RomFiles and extract the .zip folder here. You may need 7Zip, or WinRAR to do so. I recommend 7Zip as it's open source and free without nag popups.
https://www.7-zip.org/a/7z2107-x64.exe
5. Connect your phone to the PC via USB-C and shut it off. Hold volume down, and power on at the same time until the recovery screen shows.
6. The RSA software will detect your proper "latest" firmware automatically in fastboot mode, allow it time to download and wait until it's done, give it some time after it hits 100.00% because the program will begin decompressing and unzipping the stock firmware, but it will NOT tell you this, keep that in mind!
7. Under the same directory in Step 4, you should now have two folders. One that says 10 and 11 with almost the same naming convention, delete ALL of the files in the folder that RSA downloaded (the 10 folder), and copy and paste all of the files from (the 11 folder), but LEAVE the name of the folder the same as what it was when RSA downloaded it, don't change the name or you'll either have to re-name it back, or re-download the firmware once more and let it extract.
8. Go back to the RSA program and hit the yellow "Rescue" button. Don't touch your phone and leave it alone! All data will be erased and it will begin flashing the firmware from Android 11 without a single issue. If you have PIN or password locked your phone previously, upon first boot up Android will ask you for your previous device PIN before you can begin setting up the device initially.
NOTE : This should preserve your warranty, mine expired a few months ago and I haven't been able to confirm this 100% because of this. (we waited a LONG time for this update!) Since the process does NOT require your bootloader to be unlocked or modified in anyway whatsoever, I do NOT see how you could possibly void the warranty. As of this writing, I have NEVER attempted to even unlock my bootloader for stability purposes, and because rooting isn't a concern to me on this device. In fact, to my knowledge you are NO LONGER able to unlock the bootloader on Android 11, so proceed with caution if this is something you require! There may be a 3-day wait of being connected to the Internet before you are allowed to use the OEM Unlock function, please keep that in mind if this is an issue.
Since it is stock firmware, there are no functionality issues to be concerned with. Calling, 5G, camera, Bluetooth, NFC and other basic sensors and extra functionality work 100% to my knowledge after testing most functions myself for the better duration of a day, even my Fossil Gen 6 Android Wear 2.0 (updating to 3.0 soon) watch is functioning flawlessly over WiFI and Bluetooth with the new update.

Please note this method is now outdated, as the OTA has been released for Android 11.

TheLastSidekick said:
Please note this method is now outdated, as the OTA has been released for Android 11.
Click to expand...
Click to collapse
It does work though, for anybody needing (or just wanting) to recover from a blown system without having to wait for a Rescue download.
Also it's a bit irritating that 95-9 for RETUS never got uploaded to lolinet. And now since 11 is released, that's all you can get through RSA, because it INSISTS on upgrading the phone to the latest version.
(Edit/Add) I would just like to have 95-9 handy for emergency reflashing if ever needed, but now I can't get my hands on it anywhere . . . except on that "easy" website and I don't really trust it 100%.
NOTE: I just flashed an 11 upgrade (manually via fastboot) and there was only 0-9 sparsechunk files. No super.img_sparsechunk.10 to be found, either the file or in the servicefile.xml . . . ? This was specifically the KIEV_RETAIL_RZK31.Q3_45_16_subsidy_DEFAULT_regulatory_DEFAULT_R8_CFC.xml firmware . . .

Moondroid said:
It does work though, for anybody needing (or just wanting) to recover from a blown system without having to wait for a Rescue download.
Also it's a bit irritating that 95-9 for RETUS never got uploaded to lolinet. And now since 11 is released, that's all you can get through RSA, because it INSISTS on upgrading the phone to the latest version.
(Edit/Add) I would just like to have 95-9 handy for emergency reflashing if ever needed, but now I can't get my hands on it anywhere . . . except on that "easy" website and I don't really trust it 100%.
NOTE: I just flashed an 11 upgrade (manually via fastboot) and there was only 0-9 sparsechunk files. No super.img_sparsechunk.10 to be found, either the file or in the servicefile.xml . . . ? This was specifically the KIEV_RETAIL_RZK31.Q3_45_16_subsidy_DEFAULT_regulatory_DEFAULT_R8_CFC.xml firmware . . .
Click to expand...
Click to collapse
Yeah the whole thing is strange the way the way each firmware is slightly a different size between what is evidently the same Retail build.

Actually, there's an easier method using RSA rescue.
You can grab boot.img for rooting.

mingkee said:
Actually, there's an easier method using RSA rescue.
You can grab boot.img for rooting.
Click to expand...
Click to collapse
I was using Rescue tool for this, may I please ask you how you were able to grab the boot.img? Thank you in advance!
Also, for those wondering if using the method above if OTAs will continue to update the answer is 100% YES confirmed.

TheLastSidekick said:
I was using Rescue tool for this, may I please ask you how you were able to grab the boot.img? Thank you in advance!
Also, for those wondering if using the method above if OTAs will continue to update the answer is 100% YES confirmed.
Click to expand...
Click to collapse
After rescue, check C:\Program Data\RSA\Download\romfiles\
Check Kiev folder