Related
Greetings to all the developers and registered users on this site... Yes, this is my first post, but I read here pretty often and I used the search function, trust me! Seriously, I've tried all I could and I am at my wits end, but this is technology, we can't let it own us, we gotta continue owning it and that's what online communities like xda help us do, so thanks for all your past, present, and future contributions here. So I got this Metro PCS Kyocera Hydro Wave (C6740N) that I can't factory reset for a number of reasons, but mainly because I believe that there is either no boot-loader or no recovery partition as a result of Metro PCS flashing the ROM...
Anyway, lets get to the juice:
- Device powers on/off, but no combo of Vol -/+ and Power buttons bring up a recovery menu or anything (holding any combo down just boot-loops)
- Device has no SIM and no micro SD card, and the battery is not removable
- Device is locked... Like, pattern-locked/google account info/too many attempts/yada yada yada
- Device has no data and no WiFi connection active, so I could not use the google account to get past the lockscreen
- Device does not have USB debugging enabled/Google drivers for ADB do not work (Windows 7 auto-detects when I plug in the phone and installs a generic Microsoft driver which cannot be removed even after uninstalling the device, and also I pointed the Device Manager to the correct Google drivers I installed with the Android SDK Tools, as well as the Samsung Naked Universal Drivers I found on this forum, and Kyocera ADB drivers I found through Google which all failed, Windows returned a message stating that the most up-to-date or best driver for this device is already installed)
What I've tried (everything possible really):
- Hard reset/Recovery from phone: FAILED
- Connect to Linux and install ADB, then tried running the adb shell, adb devices, fastboot devices, etc but phone not detected: FAILED
- Connect to Windows 7 and install ADB (Android SDK Tools), I literally checked every single box and installed Platform-tools, google drivers, everything, got to the command prompt as admin, cd to the ADB directory, ran same commands as in linux, also tried commands on several forums and posts like adb shell rm /data/system/gesture.key to remove the lock but everything: FAILED
- Connect to Windows 7 and attempt to install proper drivers using RootGenius, MoboRobo, PDAnet, and several other suggestions which all were oblivious/unable to detect the device despite Windows recognizing it, so they all: FAILED
- Connect to Windows 7 and attempt running ADB through a Cygwin terminal, but the command "sudo" was not recognized/not valid, so: FAILED
- Connect to Windows 7 and use XRYViewer to extract data from the phone, possibly to see the system files and get an actual understanding of what everybody is saying you need to mount from the recovery partition, but no clue how to use this, since I can't find an XRY file in the internal storage, so: FAILED
- Connect to Windows 7 and access data/recover data from device using "Wondershare Dr.Fone for Android" and "iLike Android Data Recovery Pro" but both programs instructed me to enable USB Debugging, which is not possible, so the both also: FAILED
Despite this being my first post, I have scoured the forums here in addition to every other forum and webpage regarding this issue as well... There just isn't much about this phone except negative reviews, and I have come to the conclusion that on this particular model phone, I am out of options... I have a paperweight... I'm not very familiar with Android... So please correct me if I'm wrong...
Any input?
I'm curious if there are any options at this point, I have been trying to get through to this phone on several computers for the past couple days and it is frustrating me... Any input from the community would be much appreciated...
Mojo2XL, I guess you did not find an answer?
Mojo2XL said:
I'm curious if there are any options at this point, I have been trying to get through to this phone on several computers for the past couple days and it is frustrating me... Any input from the community would be much appreciated...
Click to expand...
Click to collapse
I have the exact same problem and it appears I am several months after your post. I just want to use this device as an e-reader but like you, I cannot get anything to recognize it!~
eenuckols said:
I have the exact same problem and it appears I am several months after your post. I just want to use this device as an e-reader but like you, I cannot get anything to recognize it!~
Click to expand...
Click to collapse
may be this:
*2767*3855# - Think before you give this code. This code is used for factory format. It'll remove all files and settings including the internal memory storage. It'll also reinstall the phone firmware.
I found code in internet, but may be it works? can't check, my "wave" comes to me from USA by post for a few weeks..
barabeka said:
may be this:
*2767*3855# - Think before you give this code. This code is used for factory format. It'll remove all files and settings including the internal memory storage. It'll also reinstall the phone firmware.
I found code in internet, but may be it works? can't check, my "wave" comes to me from USA by post for a few weeks..
Click to expand...
Click to collapse
doesnt work.. you can only get to emergency dialer which can only b used to make emergency calls
elliwigy said:
doesnt work.. you can only get to emergency dialer which can only b used to make emergency calls
Click to expand...
Click to collapse
okay. i will try something, when my phone will come. is your Wave locked?
barabeka said:
okay. i will try something, when my phone will come. is your Wave locked?
Click to expand...
Click to collapse
i bought another phone and they threw it in free but it has a pin code lock so i cant even get to google screen to bypass frp as im stuck at pin lockscreen and these darnphones have no recovery..
i doubt ull figure out a way as im real savvy with this stuff lol theres no recovery to boot into in order to reset and no way to update tje phone wothout knowing the pin code
any luck? i cant believe this thing is this locked down. makes apple look like chils play
warriorpluto said:
any luck? i cant believe this thing is this locked down. makes apple look like chils play
Click to expand...
Click to collapse
i believe it can be done with a pc
Did you happen to get the files the other member posted that was only available for eight days?
Mojo2XL - Sort of.
I saw a youtub video (sorry no link) that says there was a OTA update that changed the phone's firmware that solved all the problems mentioned here. Thing is I have no carrier and cannot find this new firmware, but, I am still hunting....
eenuckols said:
I have the exact same problem and it appears I am several months after your post. I just want to use this device as an e-reader but like you, I cannot get anything to recognize it!~
Click to expand...
Click to collapse
I'm having the same problem, I have been trying to get this thing to hard reset for a week now. There has to be a way to reset this Hydro Wave.. Has anyone dealt with this thing?
Hey hold the buttons as follows volume- & power at the exact same time while your phone is off be warned if you phone was preowned you need the goole account originally activeated with that phone if you do not have that then your in the same vote as me i cant remember any of my gmail account info to my wave from when i had it active I have litterally tried every thing to recover the info and i still can't recover it
WhiteWolf77 said:
Hey hold the buttons as follows volume- & power at the exact same time while your phone is off be warned if you phone was preowned you need the goole account originally activeated with that phone if you do not have that then your in the same vote as me i cant remember any of my gmail account info to my wave from when i had it active I have litterally tried every thing to recover the info and i still can't recover it
Click to expand...
Click to collapse
That doesn't work on this phone the hydro wave from AT&T has factory reset protection so it cannot be reset using the volume down and power button reset
Any update?
dannybz said:
Any update?
Click to expand...
Click to collapse
let me work on this, been trying to master as many FRP bypasses as i can. I don't have the device but a client is in the same boat
I accidentally stumbled upon a something weird. I've managed to make the camera crash to the home screen somehow. I believe this was a result of holding both volume buttons and opening numerous menus while using the camera. My guess is that it overloads it after a certain amount of times and causes it to crash. I've gotten the android UI to crash like this before. I will try to recreate the scenario and update you guys on this. it's on a Kyocera Hydro Wave. Running android 5.0 I believe. Try going wild until the phone starts to lag. eventually stuff will crash and the lock screen may go with it. use this to your advantage and enable USB debugging as quickly as possible because it will reset itself after about 30 seconds. Someone else on YouTube has recently told me that it worked for them. I would look into doing that.
PhoneScrambler said:
I accidentally stumbled upon a something weird. I've managed to make the camera crash to the home screen somehow. I believe this was a result of holding both volume buttons and opening numerous menus while using the camera. My guess is that it overloads it after a certain amount of times and causes it to crash. I've gotten the android UI to crash like this before. I will try to recreate the scenario and update you guys on this. it's on a Kyocera Hydro Wave. Running android 5.0 I believe. Try going wild until the phone starts to lag. eventually stuff will crash and the lock screen may go with it. use this to your advantage and enable USB debugging as quickly as possible because it will reset itself after about 30 seconds. Someone else on YouTube has recently told me that it worked for them. I would look into doing that.
Click to expand...
Click to collapse
Is there anything a little more realistic possible? Lol, I can see an update available, can't connect to WiFi to update haha. The stuff they lock these phones with anymore i swear
I'm new to this forum, but NOT new to this site . I have visited here on numerous occasions seeking the help that needed . With that being said, I would like to offer a Bonafide, Tried and True way to factory reset the Kyocera Hydrowave . I KNOW that this work's for I have done in on numerous occasions for a friend of mine that works for Metro PCS ....
Step One: Completely power off the phone .
Step Two: Hold the Power AND Volume DOWN Buttons SIMULTANEOUSLY .
Step Three: DO NOT release any buttons, even when you get to the Boot Menu . (Very Important, If you don't do it right, you have to start all over lol ) .
Step Four: Once inside the Boot Menu, ONLY release the Power Button; or the Boot Menu will close and you have to start all over again .
Step Five: Use the Volume Down Button to Highlight the Wipe/Factory Reset Option .
Step Six: Use the Power Button to Select the option .
Step Seven: Watch the bottom of the screen for the progress, and then use the Volume Up Button to restart .
And there you have it . I hope that this helps out SOMEONE out there, because I feel good giving back for the help that I have received on here .
PS.( If you would like for me to post a Video Tutorial on this, can someone please tell me how to post the Video; I guess by me being a Newbie on here, I'm not allowed to do as of yet ) . If Anyone needs to contact me, as I'm not on here very often, my email is [email protected] .
LilAnt530 said:
Is there anything a little more realistic possible? Lol, I can see an update available, can't connect to WiFi to update haha. The stuff they lock these phones with anymore i swear
Click to expand...
Click to collapse
As unrealistic as it may sound it actually works Trust me on this. its similar to the LG attack which... is nothing but entering a long password.
betanews.com/2015/09/16/bypass-the-android-lollipop-lockscreen-by-entering-a-really-long-password
Just give it a go. it already worked for one dude on youtube. it takes a while but it honestly works. If you can get it, update the phone as soon as possible turn the screen timeout off and let it update. when the phone resets the update will install and you will be able to factory reset.
I mean it couldn't hurt. if you're locked out with no factory reset and ADB tools won't work what else can you do?
I purchased a Samsung Galaxy S7 Edge from a guy off ebay with smashed the screen for a cheap price and recently took it to my local Official Samsung repair shop who repaired it for a reasonable price. I turned the phone on and it had all of the other guys personal stuff on the phone and he had a screen lock on there that I didn't know how to unlock so I did a factory reset in recovery without realising about FRP. When the phone rebooted I get the google screen asking me for the original google account credentials. I have tried contacting him and getting no joy. I have tried all of the methods in youtube but as the phone has the December 2016 security update none of them seem to work. When I plug the phone into my PC windows just says the USB device has malfunctioned and does not connect. I have installed the full Samsung USB drivers but the PC still doesn't recognise it. Could the fact it is not recognised be due to the google frp or could it be to do with the fact the phone could still be damaged from when it was dropped. Im not fussed about the USB port in normal use but it appears the only method to bypass the FRP is via the USB and using one of those methods. Can anyone help please?
I had the same problem and from my understanding all the methods are blocked now I'm trying to find out if theres a way that i just havent figured out yet i've book marked your question and will keep checking back to see if you have had any help
I know it is a tricky subject as I could be in possession of a stolen phone in which case I am rightly being locked out of it but I have the receipt to prove I have purchased it which I am willing to show to anybody who might know a way around it.
Have you tried putting it in download mode then using emergency recovery on Smart Switch?
Yes tried that earlier. Smart Switch doesn't recognise it. Just stays on the screen telling me to connect the phone even though I already have. When I plug the phone into the laptop it says the USB device (my phone) has malfunctioned and Windows doesn't recognise it. I have tried ODIN and that doesn't recognise the phone either as it isn't being given a COM number by Windows. Guess I will have to take it back to the Samsung Support Centre as I paid them to get the phone working and he said the price quoted was to get it fully working. If the USB isn't working then they can repair it!
Hey need help? Contact me on WhatsApp @ +918848180955 I'll help u out
Ditto as him
Proof of ownership, otherwise identical to dec update. whatever you think, need the help..thanks
ash 202 said:
Hey need help? Contact me on WhatsApp @ +918848180955 I'll help u out
Click to expand...
Click to collapse
I've just unlocked a S5 Neo.
I flashed the very first firmware version (5.1.1)
FRP lock still there BUT I could now use the side sync hack or samsung unlock APK on OTG cable.
Then flashed the latest 6.0.1 version
Did you manage to unlock it?
I have the same problem
Any good current methods for this
uninstall all drivers related and kies. Then install kies and needed drivers. See if you can connect via download mode now.
godders3906 said:
I purchased a Samsung Galaxy S7 Edge from a guy off ebay with smashed the screen for a cheap price and recently took it to my local Official Samsung repair shop who repaired it for a reasonable price. I turned the phone on and it had all of the other guys personal stuff on the phone and he had a screen lock on there that I didn't know how to unlock so I did a factory reset in recovery without realising about FRP. When the phone rebooted I get the google screen asking me for the original google account credentials. I have tried contacting him and getting no joy. I have tried all of the methods in youtube but as the phone has the December 2016 security update none of them seem to work. When I plug the phone into my PC windows just says the USB device has malfunctioned and does not connect. I have installed the full Samsung USB drivers but the PC still doesn't recognise it. Could the fact it is not recognised be due to the google frp or could it be to do with the fact the phone could still be damaged from when it was dropped. Im not fussed about the USB port in normal use but it appears the only method to bypass the FRP is via the USB and using one of those methods. Can anyone help please?
Click to expand...
Click to collapse
Try this OP.
I Found A Way To Remove FRP that dosen't trip any trips
thundastruck said:
Try this OP.
Click to expand...
Click to collapse
Have a look at my post here... How To Reset FRP (Nearly All Fones From Android 6.x.x to 7.x.x, No Trips, Flash counter inciment, Knox, Still Mode = Official, Warenty 0 (0x0000) (Still working 16 June 2017)
You see, im not all that good with programming APK files, Dalvik VM, Obex,ect, but Linux I'm your man so i figured where is the email/pass info held and is there a switch to keep it on off, ends up one of the easiest hacks i've ever done, no complicates hashed/salted double coded switch, or hard wired switch,
just a very small partition that when or if you have any google account info stored in it you get locked out till you enter the exact same info, so i just dd,d the partition after taking a backup of course lol (; then when the fone booted to download mode i noted FRP=OFF so i flashed the stock bootloader to let the fone boot all the way to video mode and YES!!! it thought it was a new fone never been used before then i check the switches/trips KNOX , device status = official, to test i just made a new google account on the spot on the phone filled all the [email protected] in then voila its working, calls, all menu items ok, official all knox fine, just the way it was when i first got it, except obviously I've upgraded to v7, hopefully this works for you, please dont use or talk about illegall activity with this, or using it for profit, it's agift I gave you's for free so i want it to stay that way, all i want is a thanks, and a beer, lol, no but seriously, when the guy that invented the hammer to ease the effort of pussing nails into wood with you hands, never got hassle about murders with them, tha fact the could be used to rob banks, rob people, damage things, smash up shops, etc so... think about it, all i done was make a tool to help people too. theres litteraly millions of exploits, including android based ones out there just now check, https://www.exploit-db.com/ , OWASP_Vulnerable_Web_Applications_Directory_Project , http://www.exploit-db.com/ , http://www.blackploit.com/ , packetstorm cve etc etc. #
This is a tool to help people how when they first got there fone, and just filled in any old stuff to get into the fun part of the fone. ie "you cannot use [email protected],com as it already in use how about [email protected],com then the password, use one lower case, one higher case, one number , one symbol, more than 12 letters but less than 20, don't use anything you talk about, your name dob etc etc etc , so most people just pick the random one google pumps out and tries random passwords till one goes through, "I've seen this done a few times with my own eyes and had to stop them and explain and this was b4 FRP" Also if you change one letter in your google password, Factory reset your fone, your locked out if the fone never got the change in time, try it, Anyways if people use this for illegal purposes its there evilness there using not mine, there just using my tool as well as the thousand of others in the arsonry, even the OS check out "kali linux OS", "Parrot OS" "Blackbuntu OS"," BlackArch Linux" Also say you code a program to check hashes at a faster rate to speed up logins etc, a hacker will use it to check stolen passwd lists faster, if a faster CPU is made, the first thing a hacker thinks of is how many words/letters it can do a second so they can bruteforce the wifi key of the local bank, hospital etc.... so?
tried EVERYTHING ....
I have the USCellular G935R4 .... S#iiiit , like I've even gotten to the actual HOMESCREEN , but no matter what I do it wont do it.. i can access just about any app and the settings accurately every single time within seconds-mins, even tried flashing it, even had FULL access and control over it using sidesync, and i tried rooting it from oneclickroot on pc but thennnn knox trips and won't let me enable developer options.... And got the error with "sign in using email and password" on quick shortcut maker , PLUS tried everything to fix the error by reinstalling google account manager , etc ...
But NOTHING ...
If ANYONE has any idea how to successfully do get into it , Pplleasee let me know!
???
Seriously ,
I swear , I'll even pay someone ...
Try flashing the phone to the latest MM via odin and try bypassing. I tried it on my G** da** S6 with may 2017 patch. Dowgraded into latest MM and tried different bypass and it worked.
any help in 2020
ash 202 said:
Hey need help? Contact me on WhatsApp @ +918848180955 I'll help u out
Click to expand...
Click to collapse
cany help in 2020 S7 Att frp removal PLEASE
Hey all,
I purchased a Nokia 3 from Facebook Marketplace and it has been factory reset of course, but Google says "This device has been reset. Please sign in to a Google account previously used". I cannot get past this.
I've downloaded several programs onto my PC but none have worked. I have tried following online tutorials which say to go via the Vision Settings, Help and Support, Get Started with Voice and playing a YouTube video but that video does not show up for me. I also tried the changing language trick then changing keyboards but that doesn't work (Missing the change keyboard option).
As far as I know it is running Android 5.1.1.
Any help would be great. Thank you
Your first step would be to contact the seller. If it was their phone, then you would need them to sign into the device itself. If they change their password and give it to you, it can't be used to unlock an FRP-locked device for 72 hours after the change.. If they don't know what account it would have been locked to, that should be a big red flag to you about the legitimacy of previous ownership. The discussion of how to bypass FRP is very much on the borderline of the gray area of what's allowable, due to why it's in place in the first place.
Thread is being watched, so it doesn't start snowballing into back-and-forths about FRP legality and blah blah. FRP is a security mechanism to deter phone thefts, as the stolen phone would be rendered useless.
So I know there's a method for pairing Wear OS watches running 2.0 through ADB with the Google Wear OS app.
Does the same apply for Galaxy Watch 4 and the Galaxy Wearable App? I really don't want to go through the configuration and sideloading of all these apps again ... That's what I get for trying to do too much with ADB and experimenting .
Not that ive found.....its annoying as hell, i have a ticket in with Samsung over it, Lots of shouting at them for selling me a $500 watch that they then seem to think they can tell me how to use. I havent finished shouting at them by a long shot. Because i test ROM's you can imagine how many hours their bs costs me....
My previous watch the Active 2 was simplish, you just set the Android ID to the same as previous install...
Niether that or the ADB method posted for earlier Wear OS works...
Do you mean this method?
Because if this doesn't work, I have a major problem, since I'm replacing roms quite often.
How to Pair Android Wear Watches to New Phones without Factory Resetting
A tutorial on how to pair Android Wear smartwatches to a new phone without factory resetting. Also useful if you flash a custom ROM and don't want to reset!
www.xda-developers.com
munky-head said:
Do you mean this method?
Because if this doesn't work, I have a major problem, since I'm replacing roms quite often.
How to Pair Android Wear Watches to New Phones without Factory Resetting
A tutorial on how to pair Android Wear smartwatches to a new phone without factory resetting. Also useful if you flash a custom ROM and don't want to reset!
www.xda-developers.com
Click to expand...
Click to collapse
it dosent work ;P
So this is the thing you were referring to. Good to know. I was planning on switching roms over the weekend, but I think I'll wait for a bit now.
munky-head said:
So this is the thing you were referring to. Good to know. I was planning on switching roms over the weekend, but I think I'll wait for a bit now.
Click to expand...
Click to collapse
I doubt Samsung will do something about it ; ) they are out of their mind! For example they block blood pressure on non samsung phone so good that on some samsung phones it doesn't work too and they region lock the watch so when you have a phone from different region you can't connect the watch at least easily
Maybe they think if they block everything on everything they will sell some more blocked **** you know because security!
Yesterday I tried pulling an adb backup (adb backup -all or something) and ended up with a ~60MB file.
Has any of you tried this method for backing up and restoring a backup? Might not save the need to reset and pair again, but can save some time when reinstalling.
Haven't tried it myself, just throwing it out there.
munky-head said:
Yesterday I tried pulling an adb backup (adb backup -all or something) and ended up with a ~60MB file.
Has any of you tried this method for backing up and restoring a backup? Might not save the need to reset and pair again, but can save some time when reinstalling.
Haven't tried it myself, just throwing it out there.
Click to expand...
Click to collapse
How it went in the end? If successfully, can you briefly describe the steps? I'll do my own research based on those, thanks
BigRulaZ said:
How it went in the end? If successfully, can you briefly describe the steps? I'll do my own research based on those, thanks
Click to expand...
Click to collapse
In a nutshell, it didn't work.
I pulled a backup, but no command would restore the apps.
This is so frustrating! I experiment with ROMs and the fact that that I have to start out fresh each time really makes me think of switching back to TicWatch.
munky-head said:
In a nutshell, it didn't work.
I pulled a backup, but no command would restore the apps.
This is so frustrating! I experiment with ROMs and the fact that that I have to start out fresh each time really makes me think of switching back to TicWatch.
Click to expand...
Click to collapse
Speaking of switching back to TicWatch, you're not wrong. The only feature that I will miss would be the ECG capability (which also is broken, no QTc value calculation, etc)
berni502 said:
I doubt Samsung will do something about it ; ) they are out of their mind! For example they block blood pressure on non samsung phone so good that on some samsung phones it doesn't work too and they region lock the watch so when you have a phone from different region you can't connect the watch at least easily
Maybe they think if they block everything on everything they will sell some more blocked **** you know because security!
Click to expand...
Click to collapse
Part of this is that blood pressure has to be approved by different authorities in different places. In the US, the FDA has not approved it.
Also, the stupid resetting thing appears to be a Wear OS 3 issue. Samsung never did that with Tizen. Google seems to have screwed the pooch on this one.
The thing about being unable to pair them once they lose connection is quite a big issue.
My watch and phone has just unpaired a few days ago, and I didn't do any system mods or anything for that to happens. If I try manual pairing with bluetooth it does not work.
I'm not friend of backups, since sometimes that process import some errors among system updates. So I normally do clean installings.
I tried that procedure removing google services via adb and wifi connection but de watch didn't connect in the end. And even if it connected it seems that some apps such as google Pay etc would give problems and would require to be reinstalled again.
On top of that I'm not quite sure but as I have the LTE version I think I will have to ask to my carrier to send me a new e-sim in order to connect the watch again, since I guess they are just one use.
So quite a big problem.
The really crummy part of it all, 1) the annoying tutorial EVERY DAMN TIME. although, as of the latest update (besides a reset a few days ago, oddly enough) it hasn't made me go through it. 2) the wearable app REQUIRING samsung internet (not beta) to be installed and default as browser while signing in and through the entire setup process. these are just to name a few things.
Hello all,
I know already that this might not be possible but I have to ask anyways. My father recently passed away unexpectedly and he has just recently bought a galaxy flip 4 (before he had a galaxy S21).
Now he still has some photos on there he recently took (Google backup is off).
I already tried unlocking the phone via Samsung find my phone but I always get the message, that the function is not enabled in the phone.
Same goes for the S21 which I also can not unlock.
The time between unlocks is already at 48h because I've tried all the numbers I could find around the house.
Is there a possibility of either:
1. Unlock the device by rooting or patching a file in recovery mode or someway else?
2. Is it possible to enable the unlock function for find my phone somehow?
3. Is it possible to reset the counter for failed unlock attempts? Because I have the feeling it has no upper limit and will just double in time forever... I may find the correct pin eventually but I need more tries.
If any of the above is possible for the S21 then this would work too because he just switched phone 2 days before he passed and the files are still pretty much identical.
If you can help and need proof of possession or anything from me to proof that this is indeed the phone of my dad please write me a pn.
I would really love to have the last pictures taken ...
I'm so sorry about your loss. I have great news! I've recently had to bypass the FRP Google lock and after many hours of research, I was able to finally find a reliable program that was free and free of viruses. I can confirm it works on the Flip4 because that's the phone I used it on. https://samfw.com/blog/samfw-frp-tool-1-0-remove-samsung-frp-one-click
G_Wiz94 said:
Hello all,
I know already that this might not be possible but I have to ask anyways. My father recently passed away unexpectedly and he has just recently bought a galaxy flip 4 (before he had a galaxy S21).
Now he still has some photos on there he recently took (Google backup is off).
I already tried unlocking the phone via Samsung find my phone but I always get the message, that the function is not enabled in the phone.
Same goes for the S21 which I also can not unlock.
The time between unlocks is already at 48h because I've tried all the numbers I could find around the house.
Is there a possibility of either:
1. Unlock the device by rooting or patching a file in recovery mode or someway else?
2. Is it possible to enable the unlock function for find my phone somehow?
3. Is it possible to reset the counter for failed unlock attempts? Because I have the feeling it has no upper limit and will just double in time forever... I may find the correct pin eventually but I need more tries.
If any of the above is possible for the S21 then this would work too because he just switched phone 2 days before he passed and the files are still pretty much identical.
If you can help and need proof of possession or anything from me to proof that this is indeed the phone of my dad please write me a pn.
I would really love to have the last pictures taken ...
Click to expand...
Click to collapse
I'm so sorry about your loss. I have great news! I've recently had to bypass the FRP Google lock and after many hours of research, I was able to finally find a reliable program that was free and free of viruses. I can confirm it works on the Flip4 because that's the phone I used it on.
SamFw Tool 4.7.1 - Remove Samsung FRP one click
Hi Today, we introducing SamFw FRP Tool version 4.7.1 Main function: Remove FRP with one click Change CSC with one click Remove FRP for new se...
samfw.com
Thanks a lot, I will give it a try!
@melymoon
I've tried this tool but I can't get into the engineering mods by entering the code into the emergency call pad.
Therefore the tool doesn't detect my phone.
It is also not recognized if I go to ADB update in the recovery menu.
How did you do it?
I got you, do you have time right now? I can work on it with you before my kid wakes up
You don't need the engineering service menu right right now, to remove the lock. I'll walk you through it.
I have a z flip 4 5g and I'm locked out of it and I cannot factory reset it and I do not have on USB debugging. Is there a way to enable USB debugging on locked z flip 4?
Can't you just factory reset it in the recovery menu?
I thought the whole idea of this post was to save the data? Everything mentioned here pretty much is gonna wipe the phone. Which leads to all that's trying to be done is bypass factory reset protection. If you have death certificate you can get Google and samsung to release the locks accordingly and it can be factory reset from the recovery menu.
From there. Frp bypass is a very gray area on xda and most people will not help.
melymoon said:
You don't need the engineering service menu right right now, to remove the lock. I'll walk you through it.
Click to expand...
Click to collapse
I'm in the same boat and have everything installed and ready to go. Is there any chance you could assist? Many thanks