Database Info

[ROM] [ 8.0.0 | 8.1.0 ] Official madOS - Jiayu S3 [MT6752]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a Official Build of madOS ( based on AOSP 8.1.0 Oreo ) for Jiayu S3 (Adv./Basic/Pro) with MTK 6752 SoC
madOS is based on pure A.O.S.P. with many additional customizations and MediaTek support.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Installation Instructions:
Download ROM from M.A.D. Facebook
OR via xda DevDB
Download madOS Unofficial OpenGapps nano or pico from Download Page
(We had built, pico and nano 8.1.0 GAPPS only )
Backup
Flash new mandatory new Oreo 8.1.0 TWRP (available on downloads)
Boot to the new TWRP recovery
full Wipes (dont come crying if you didn't .. ;p )
Install rom (optionally following by GAPPS if you use them)
Reboot System
DO NOT: Flash any rooting zips (SuperSU or Magisk) on the first flash, together with rom
Working:
RIL (Calls /SMS, Data connection, etc)
Wifi
Bluetooth (calls, media, file transfer, etc)
FM Radio
All Sensors
Lights; HW Keys
Both storages & MTP
HW de/encoding
Camera (photos only)
GPS & aGPS
Audio
NFC ( available only on the advance/PRO versions)
madOS Extras (the features ya'all used too), plus, some new features we added on Oreo)
Not working:
Native Video Recording
---> However works just fine with camera apps that use SW de/en coding (i.e.: Footej Camera available at PLAY)
XDA:DevDB Information
[ROM] [ 8.0.0 | 8.1.0 ] Official madOS - Jiayu S3 [MT6752], ROM for the JiaYu S3
Contributors
superdragonpt, DerTeufel1980, fire855
Source Code: https://github.com/MediatekAndroidDevelopers
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Oreo TWRP / LP layout
Based On: madOS
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2017-11-18
Created 2017-11-18
Last Updated 2017-12-24

FAQ
General F.A.Q.
Q: What the hell is madOS ?
A: madOS, (M.A.D. Team OS), is a ROM based on pure A.O.S.P. with extended capabilities and customizations made by or merge/adapted by M.A.D. Team.
Q: Which recovery should I use for this ROM?
(edit April 2018)
A: Latest M.A.D. TWRP 3.2.1-0 recovery for the Jiayu s3 OREO 8.1.0
--> Check xda Download Section
Q: How do i flash new recovery ?
A:
1: You can flash it with a scatter file (LP rom layout)
2: You can simply flash it from the existing twrp recovery: Install> Install image> Select Oreo TWRP> Select "Recovery" as partition to flash.
Reboot to recovery to use new one
Q: Do i need to make full wipes?
A: YES, dont come crying at me, if you didn't .... ;p
Q: What is "full wipes" ?
A: To Wipe : Cache; System; DATA ...
Q: New TWRP fails on wiping, why ?
A: You need to go TWRP Settings> Select the option
"Use rm -rf instead of formating"
Update madOS April 2018:
New TWRP is fully working now, no more need of this workaround
Native wiping of both ext4/f2fs is working and twrp is faster then ever
Q: What should i use f2fs or ext4?
A: Both are supported, choose the one you desire
You can only use f2fs on cache & data (backup your stuff, as it'll be all erased)
Q: is the Data connection issue of going to / from 4G still present?
A: nope data switchs pretty fast on our new RIL
2G>3G>4G | 4G>3G>2G pretty fast
Q: Does this rom have any Theme support
A: Yup, We have working Theme Engine (madOS extras)
Update: On Oreo 8.1.0:
- We have extended Theme support even further ( madLauncher, messaging, etc)
- As well as many fixs
Q: Some translations are missing for my language, can I help?
A: Sure you can, please check our translations repo available here , you can either do a pull request, or if you don't know how to work with git, sent us the XML. Strings for your language ( Check Readme on repo).
Q: I want to report a bug(s) do you have an issue tracker?
A: Yeah... madOS issue tracker
Q: My Jiayu s3 Basic (the 2GB RAM Version), shows "NFC has stopped"
A: The 2GB version, doesn't have NFC, however in the last NFC updates we did, this is now showing, as an workaround:
Go to TWRP:
Mount /system
Go advance>file manager
Navigate to /system/app/ and delete the NFC app, this should fix your NFC service force closing while on boot
Q: What's working ?
A: Check first Post for current status
Q: App "x" doesn't work, why?
A: Probably not compatible with OREO yet, feedback is welcome
Q: Is the rom rooted?
A: NO, But you can easily root with :
1: Magisk ( v14 )
NOTE: magisk v15, v16 aren't working (don't spam me, im not the magisk developer
2: Super SU ( v2.82 onwards)
NOTE: v2.82 or even latest beta of 2.82 will work fine
after flashing it, you need to go on the SuperSU.zip and install the management app
Q: Should i root together with rom ?
A: Not advised.. mainly the Magisk that gives some weird issues...
Flash ROM and GAPPS (if you use gapps), after first boot get back to recovery and flash your desire rooting method
Q: Does xposed work?
A: Is there Xposed for O? ... then no ;p
Q: How is battery life with Oreo on the Jiayu?
A: Pretty awesome
Q: Does this build support Vulcan?
A: No....duh! v
Q: Does doze work in this build?
A: Yup
Q: when will (feature/issue here) be fixed?
A: NO ETA , please
Porting F.A.Q.
No porting support, no port questions allowed on this thread, and porting PMs will be auto-deleted, porting replies will be reported as well
G.APPS F.A.Q.
Q:What GAPPS package should I use?
A:OpenGapps arm64 nano/mini
Since there's no Official GAPPS for 8.1.0 just yet...
... we had built OpenGapps nano and pico versions
--> Check Download Section
Q: How to properly install GAPPS?
A:Flash Rom + Flash Gapps at once
CREDITS and Thanks
madOS Team
Our translators, credits list here
A.O.S.P.
AOSPA
DU (Dirty Unicorns)
Omni
HELP supporting madOS
We do this on our free time, however we do have costs on maintaining this :/
Any donation is highly appreciated
You can donate by using
this link
If the above doesn't work in your country, then you can directly donate by using this e-mail adress: [email protected]
About madOS Proprietary Apps
You are NOT allowed by any means, to use our madOS apps on any other build, your rom
This is exclusively for OFFICIAL madOS ROM releases
@To Moderators: Feel free to clean the thread, whenever users start spamming, severe OT, or questioning about porting...

Changelogs / madOS Features
Changelogs
[Stable] Build [8.0.0] 20171118
First Release
Patch Level: 8.0.0 [OPR1] November 6, 2017
Kernel: 3.10.108 ( Oreo branch)
[Stable] Build [8.1.0] 20171224
First Release of Oreo 8.1.0
madOS version: 2.1 (O 8.1.0 )
Patch Level: 8.1.0 [OPM1] 2017-12-05,
Between the new Oreo 8.1.0 & madOS bug fixs & device fixs , there is an huge changelog,
... so im narrowing this to bare minimum this time
main changes:
All mad extras stuff is now fixed (fastcharge/ weather/ sensors calibration, performance settings, etc, etc)
Theme engine:
This started as an feature from AOSPA on Nougat (and has been depricated ever since... )
* We forward port to Oreo 8.0.0, and now to 8.1.0
* We extended theme engine to per-apps (currently madLauncher; messaging, etc)
* And added way too many fixs on top of it
exfat and ntfs are now properly supported
Bluetooth Calls fixed
New Sensors HAL
New RIL
Playback fixed (Youtube, whatsApp, etc)
---> ETC
MARRY XMAS !
[Stable] Build [8.1.0] 20171230
Audio: Fix couple issues introduced by me, on last build
Audio "media bug": work was made on this matter, hopefully it's gone
UI / UX : improvements
HWC / SF: many fixs & Enhanced for 8.1.0
Video / Playback: More Video Playback improvements
FM Radio: couple issues adressed
Mem Leaks adressed (introduced on 8.1.0)
Flashlight : some issues where adressed
Bluetooth: more work done on A2DP & car-BT
NFC: better compatibility with TAG reading & MTK protocols & device specific FW
Other small things: Update APNs, etc ...
madOS color Engine:
Rebased & Many improvements on the engine
Extended / better support per-apps (messaging; Launcher,etc)
Extended /better support to theme PowerMenu
Better support on theming Quick Settings
Option to override default Google 8.1.0 QS theming
Easy reset button to get back to default
"MAD Mode" If you use Live Wallpapers... this is awesome ;p
Other stuff..
[Stable] Build [8.1.0] 20180417
Android 8.1.0 release 20
Patch level April 2018
madOS version: 2.1.3
Doze / Ambient settings:
Hand-Wave Gesture
ambient lockscreen weather, etc
New hardware settings (some functions are WIP for 6752)
Custom header image provider improvements
powermenu: cleanup and fix
expanded desktop settings
visualizer settings
increase default maximum password length
option to toggle torch by longpressing power button (with screen off)
Optimize multithread installation for apps
Removed Chromium in favor of Jelly
(to allow future costumizations, also way less space)
JNINativeMethod improvemensts
HWCAdapter Improvements ( Google you suck!)
Tight up security by requiring unlocking to access tiles
hide sensitive information while locked by default
Bring back less notification sounds
Weather update & fixs
dual-sim ringtone support
Setting: increasing ringtone
Settings: unlink notification volume is back
Settings : Option to enable searchpanel, including Navigation Ring Targets
OMS: fixs , upstream
Disable persistent Mobile data by default
AppOps: is back
screenrecord is here
Slim Recents: Fixed & updated to v3.0
smartwake fixs
fling and velocity settingsSettings
poor man battery style tweaks
carrierlable settings fixs
searchpanel: properly implement switches
Settings : Slimified CM Navigation Ring Targets
Fix up secure lockscreen (pattern, pin, etc)
Keyguard: Forward port lockscreen quick unlock
Secure Settings: Option to scramble pin layout on unlocking
Quick settings revamped:
Quick settings background: allow changing alpha
tiles
new features
etc
New usb settings:
deny_new_usb setting
usb configuration
USB default config
colorengine:
colorengine: fix tinting of unruly dashboard icons
colorengine: fix themed conditions and suggestions
color engine: add adv settings fragment
color engine per-apps extended ( messaging, madlauncher, etc)
wallpaper based theme switch
other stuff
AndroidRuntime crashs fixs, etc
madOS: Our cookie is finnaly here !!!
Add support for page theme color to WebView and WebChromeClient
New rebuilt modem baseband ( hybrid ) feedback is welcome
Bluetooth fixs
NFC: rebuilt proprietary mtk blobs from upstream
Ril improvements
many other stuff...
TWRP:
Updated to v 3.2.1-0
Fixed native format
many other improvements
Twrp will be auto-updated during the rom flashing
[Stable] Build [8.1.0] 20180422
Audio: Fully rebuilt & sound is now max out (max values supported by the device)
Media Bug: New approach (hopefully this is fully fixed now)
Some frameworks and some other small fixs
Changes added since previous build (forgot to add on the already huge changelog)
Camera: Improved quality ( photos )
madWallpapers added ( pics from FB contest winners)
[Stable] Build [8.1.0] 20190722
Fixed critical bug where device would enter in infinite bootloop to twrp
secure lock screen improvements
Media codec improvement
RIL ( telephony) improvements
increase Magisk compatibility
General clean up

Reserved

Can I flash with f2fs or must format as ext4?

We can almost see it, you can almost touch it, in a very short time we can all install it

Thanks for your work.
Link to TWRP is fine,
Waiting for the Rom link, active and downloading...
Marc

All up
bb

it is UP yeaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaahhhhhhh thanks mad installing

finally
Have fun!

Yeahhhhh Thank you dragon, thank you MAD
Today is a historical day. :silly:
When a 2015's phone receive Android 8.
Neither OnePlus 5T came with 8 in time xD

Lez gooo!

Thank you all MAD people, it's flashing time

fantastic work phone runs too fast too smooth great. that team aproove that everything can become. the only mad feature that i miss or i cant find it is the quick unlock when correct pin ented well done team i think that is time for us to donate that team
edit also there is not battery settings in statusbar icon/text...

sokolataki said:
fantastic work phone runs too fast too smooth great. that team aproove that everything can become. the only mad feature that i miss or i cant find it is the quick unlock when correct pin ented well done team i think that is time for us to donate that team
Click to expand...
Click to collapse
@fire855: you should have merged this [emoji14]
Sent from my uhans h5000, running Android 8.0.0

Thank you mad team...

I'm trying to install it but I have some problems.
First I installed new Recovery but version is the same as previous: 3.1.1-0 ¿¿??
Then, when trying to wipe all partitions I get the following errors:
mke2fs -t ext4 -m 0 /dev/block/mmcblk0p18 process ended with signal: 6
Unable to wipe Cache
Unable to wipe /cache​
If I try to flash the ROM, then I get these errors:
E1001: Failed to update system image
Updater process ended with ERROR: 7​
Some idea?
Thks

Try to flash the new twrp first, but after choosing the image I have to fill in a partition.
What have I to choose there for flashing the new twrp

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
I'm so happy for the moment with many gin tonic intus

chabula said:
Try to flash the new twrp first, but after choosing the image I have to fill in a partition.
What have I to choose there for flashing the new twrp
Click to expand...
Click to collapse
Could you please elaborate your answer?
What do you mean when saying 'I have to fill in a partition' ?

[ROM] [ 8.0.0 | 8.1.0 ] Official madOS - Ulefone Metal [MT6753]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a Official Build of madOS ( based on AOSP Oreo ) for Ulefone Metal with MTK 6753 SoC
madOS is based on pure A.O.S.P. with many additional customizations and MediaTek support.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Installation Instructions:
Download ROM from M.A.D. Facebook
OR from xda DevDB
Download OpenGapps nano or pico from OpenGapps
(choose ARM64 and Android 8.1)
Backup
Flash new TWRP (available on downloads)
Boot to the new TWRP recovery
It's recommended to wipe data, cache and system
Install ROM (optionally following by GAPPS if you use them)
Reboot System
Working:
RIL (Calls, SMS, Data connection, etc)
Wifi
Bluetooth
FM Radio
All Sensors
Fingerprint
Lights
Both storages & MTP
HW de/encoding
Camera (photos and video)
GPS & aGPS
Audio
madOS Extras
Not working:
-
XDA:DevDB Information
madOS_O_Metal, ROM for all devices (see above for details)
Contributors
fire855, DerTeufel1980, superdragonpt
Source Code: https://github.com/MediatekAndroidDevelopers
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP
Based On: AOSP
Version Information
Status: Stable
Created 2017-11-23
Last Updated 2018-04-18

General F.A.Q.
Q: What the hell is madOS ?
A: madOS, (M.A.D. Team OS), is a ROM based on pure A.O.S.P. with extended capabilities and customizations made by or merge/adapted by M.A.D. Team.
Q: Which recovery should I use for this ROM?
A: Latest M.A.D. TWRP recovery
--> Check xda Download Section
Q: How do I flash new recovery ?
A:
1: You can flash it with a scatter file
2: You can simply flash it from the existing twrp recovery: Install> Install image> Select Oreo TWRP> Select "Recovery" as partition to flash.
Reboot to recovery to use new one
Q: Do I need to wipe anything?
A: Yes, it's recommend to wipe Cache, Data and System when you come from an older android version
Q: What should I use f2fs or ext4?
A: Both are supported but f2fs is often better
Q: Does this rom have any Theme support
A: Yup, We have working Theme Engine (madOS extras)
Q: Some translations are missing for my language, can I help?
A: Sure you can, please check our translations repo available here , you can either do a pull request, or if you don't know how to work with git, sent us the XML. Strings for your language ( Check Readme on repo).
Q: I want to report a bug(s) do you have an issue tracker?
A: Yeah... madOS issue tracker
Q: What's working?
A: Check first Post for current status
Q: App "x" doesn't work, why?
A: Probably not compatible with OREO yet, feedback is welcome
Q: Is the rom rooted?
A: NO, But you can easily root with :
1: Magisk ( v14 onwards.)
2: Super SU ( v2.82 onwards)
Q: Should I root together with flashing the rom?
A: Not advised.
Flash ROM and GAPPS (if you use gapps), after first boot get back to recovery and flash your desire rooting method
Q: Does this build support Vulkan?
A: No
Q: Does doze work in this build?
A: Yes
Q: When will (feature/issue here) be fixed?
A: NO ETA , please
Porting F.A.Q.
No porting support, no port questions allowed on this thread, and porting PMs will be auto-deleted, porting replies will be reported as well
G.APPS F.A.Q.
Q: What GAPPS package should I use?
A: OpenGapps arm64 nano/pico
Q: How to properly install GAPPS?
A: Flash Rom + Flash Gapps at once
CREDITS and Thanks
madOS Team
Our translators, credits list here
A.O.S.P.
AOSPA
DU (Dirty Unicorns)
Omni
HELP supporting madOS
We do this on our free time, however we do have costs on maintaining this :/
Any donation is highly appreciated
You can donate by using
this link
If the above doesn't work in your country, then you can directly donate by using this e-mail adress: [email protected]
About madOS Proprietary Apps
You are NOT allowed by any means, to use our madOS apps on any other build, your rom
This is exclusively for OFFICIAL madOS ROM releases
@To Moderators: Feel free to clean the thread, whenever users start spamming, severe OT, or questioning about porting...

Changelogs
[Stable] Build [8.0.0] 20171123
First Release
Patch Level: November 6, 2017
Kernel: 3.18.83
[Stable] Build [8.1.0] 20180418
First 8.1.0 Release
Patch Level: April 5, 2018
Kernel: 3.18.105
Many improvements (big updates for graphics, bluetooth, RIL and many more things)
Some new madOS features like dual-sim ringtone support and expanded desktop

Reserved

one more
reserved

<-- wants one post, too

First I notice an error in my phone (second revision), the mobile network falls at every moment (both 4g and 3g).

For getting it working right, i had to remove the Sim-Card during the first bootup. Otherwise it gets stuck on the PIN-Input.
This just occurs after the installation of the GApps.
(I tried first to get ROOT with SuperSU 2.82 and 2.79. This does not work. Only magisk worked fine (v14.5 beta)).
When i try to reboot my device with the Pop-Up Shutdownmenu, it just gets stuck and i have to turn down my device with long-pressing the shutdownbutton.

folkommen said:
For getting it working right, i had to remove the Sim-Card during the first bootup. Otherwise it gets stuck on the PIN-Input.
This just occurs after the installation of the GApps.
(...)
Click to expand...
Click to collapse
Yeah, no worries
Google likes to play with us..
this issue is fixed now
cheers

Mobile Network failes every few minutes

Wonderful upgrade Oreo 8.0.0 + open gapps pico + magisk 14.0, after wipe and format f2fs cache and data. Metal Rev1 Oct 2016 much faster now!
Small issue so far running for 3 days : unable to connect LTE at boot. I have to connect sequentially 3G first then LTE each time data connexion is lost.
This issue has been reported earlier with 7.1.1 upgrade
https://forum.xda-developers.com/showpost.php?p=70676594&postcount=267
https://forum.xda-developers.com/showpost.php?p=70780267&postcount=287
Important : No LTE issue with stock ROM (December 2016) and Eragon (October 2016).
Similar issue has been reported with Jiayu S3 Oreo 8.0.0 and earlier 7.1.2
https://forum.xda-developers.com/showpost.php?p=74573237&postcount=148
https://forum.xda-developers.com/showpost.php?p=73431734&postcount=5975
Other issue : unable to share LTE connexion via USB for PC. (Was OK with 7.1.2 May 27th MADOS 1.1)
Thanks anyway MAD for this ROM almost perfect!

Google store does not work from me, 2 x do it all thins as in post, nano gapps!

Data transfer to the PC does not work, that is, SElinux on the new TWRP

Hi. I install this rom.
Automatic switching between 2G and 3G does not work. What to do?

Problems in custom ROM
There is a problem in the USB connection to the computer, it connects and disconnects then I have this same problem with this [ROM] [7.1.1 | 7.1.2] Official madOS - Ulefone Metal [MT6753] and tabem with [ROM] [8.0.0] Official madOS - Ulefone Metal [MT6753], with the original Rom it does not have this problem.
Other problems I found in [ROM] [8.0.0] Official madOS - Ulefone Metal [MT6753] was this: ViPER4Android FX (2.5.0.5) v2.2 does not function, the root I installed SuperSU v2.82 SR5 2017 10 01 224502 the cell phone came in bootloop, out of this problems I had, all other functions works perfectly.

Great...
Everything good, except battery: (from 45% mobile phone goes out

SIM not detected ...

in fact SIM is out of order ... i have put it in another phone and still not working but before installing version 8 it was working :/

pascall said:
in fact SIM is out of order ... i have put it in another phone and still not working but before installing version 8 it was working :/
Click to expand...
Click to collapse
Bad luck...
Sent from my uhans h5000, running Android 8.0.0

Should it caused by ROM ?
I'm waiting for a new one and i'll see ...
Other problem with this ROM :
- Still have some kind of lines displayed on the left side screen in some app like Instagram
- Battery : yesterday mobile shutdown at 40% of battery, and battery is discharging quickly 40% in 4 hours (without using phone SIM still out of order)

[Treble][ARM64][AOSP][J701X]Project_Spaget X

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome to Project Spaget X ARM64 Treble For Galaxy J530X/J730X/G610X/J701X/J710X​
Some information you should know..
This is a full Treble ARM64 Vendor/Kernel implementation for the Exynos7870 Supported devices
If you want to report a Bug, read the F.A.Q First Then provide a logCat OR LoggingKit.zip with detailed explanation
Read the instructions and the F.A.Q Before installing the rom or posting a reply.
[FOR DEVS] You are allowed to customize this vendor if you want to use it in ROMs with proper credits. but not to distribute 1:1 copies
- Personal Notes
And here we are, few leaks and reworks later. X is here. i went with a letter this time just because it looks cool. This is officially going to be EOL for ARM64 AONLY vendors that i make (unless a critical bug was here that needed attention) . i dont have alot of time to work on 7870 And when i do i prefer it to be on something more productive than Treble
Anywya, TLDR : alot changed, alot was fixed. its a new vendor, flash and enjoy
Old releases
Alright, The "second" Treble update is here, this time it is FULLY ARM64 compatible. Thanks to the hard-work of @Astrako who managed to boot ARM64 Exynos 7885 bases on our device. This project is HEAVILY based on his work. and i would like to make that very clear. This is not a OneMan job. this took alot of hardwork by many people to make it reach the stage it is at. basically we are official minus the tag. This project is also possible thanks to my dear friends @Kique119 @me2 @SPARTANICUS and my other testers who spent day and night testing this with me.
At this stage, everything is mostly GSI related.
And finally, the cherry on top, is support for 3 more devices. Thanks to the devs who assisted me on adding support for their own devices. mentioned below.
If you appreciate this ambitious project, consider hitting thanks, supporting the thread, and donating (Paypal) to support my development (using cocaine of-course)
- Initial Notes:
Supports ONLY the mentioned devices Above
1. Don't forget to check bugs before asking questions
2. Since most of the GSIs are AOSP, forget about VoLTE, Knox features, Samsung apps, Camera mods or features, or other Samsung related features.
3. You can use any non-treble rom even if you have treble vendor installed, as long as you flash a non-treble kernel. The rom will ignore your vendor and everything will be as non treble.
- General Features :
- based on G965F Vendor with VNDK-28
- Adapted to J730/J530/G610/J710/J701 devices
- latest CronosKernelV5 included with most of the features of OneUI kernel + many more
- misc things enabled in framework overlay for better experience
- Seamless GSI patching, without user intervention
- Seamless setup process, with dynamic Scripts
- And Spaget
- How to Install Project Spaget:
- Flash `Exynos7870_CreateVendor` and reboot recovery
- Flash `Exynos7870_Spaget_X`
- Flash your desired ARM64_AONLY GSI
- Read OPTIONAL below
- What GSIs are support/recommended ?:
- Avoid sGSIs and flash source built GSIs (Such as PHH,PE)
- ARM64_AONLY GSIs only
- I recommend Pixel-experience or evo x and luke GSIs
- if you want a daily rom. avoid sGSIs
- More can be found here : Treble
- I dont have googleapps. what do i do ?:
ONLY for gsis that does not come with google apps
- Download Gapps pacakge from Here (ARM64 > VER > Micro or lower
- Go to TWRP > Wipe > Advanced Wipe > Tick System > Repair > Resize
- Flash opengapps_xxxx
- I need more info. where do i get it ?
Ask in this thread. if you need more , head to
Spaget Notes and support : Telegram Group
General bugs (GSI):
- offline charging is broken in Android 10 roms
- Bluetooth Calls
- Some GSIs might not include a camera, use Footej
- Some camera apps will have stretch
- I dont like it, how do i revert ?:
- Reboot to recovery
- Flash `Exynos7870_RevertVendor`
- Reboot recovery
- Flash any non treble rom or restore your previous twrp backup
Is that all ? I have treble now ? what about all the complicate process before ?
Yes, you now have a project treble device, ready to flash any GSI/sGSI of your choice aslong as it fits in your SYSTEM partition.
The entire process changed and now is much more seamless and noob-friendly. yet take caution as always
What if i didn't boot ?
In some cases, you might be stuck at a bootanimation loop or a splash loop, in this case follow the troubleshooting steps in the F.A.Q post
Credits
@corsicanu For great help with the repartition scripts, GSI patching and tons other throughout the years.
@Astrako for making booting ARM64 a possibility. and allowing this project to exists. kudos
@Kique119 For his awesome testing and documenting this project, without him there would be no spaget
@KassemSYR, for G610F Support and testing.
@Zero_Cool7870 , @DAvinash97 , @mohitsama and ORIGINALNAME123 for J710/J701 support
@SPARTANICUS For his great work maintaining KRAKEN kernel, which supports this project fully
Testers :
@Kique119 @LuanTeles @ion1s @djedjy @vsmhell @fetaiharbin @Mizo2019 @Me2 @LelMwhLwl @@rlukas210
@PedroDomeneghi @DaffyMirror4318 @bien2004official @AleeX157 @Alijouhara
And many more i cant remember the usernames of. please mention
Downloads. Changelogs , F.A.Qs below
OldPost (a64)---
So, i have been hesitated to release this project since last year. GSIs are not the most stable and many J users prove they are unable to read. they just want ready stuff. with this project that is not the case. if you skip the instructions/F.A.Qs and notes, dont bother installing this project as you probably wont be able to get it running.
This is a fully featured VENDOR and KERNEL designed for this device to support project treble, it is based on other Exynos 7870 Vendors and modified to support our devices, i have also added few patches and updates that even official 7870 vendors do not have. to get the best possible experience
I have also added a GSI_PATCH zip that should be used if you want to have the least amount of bugs.
The vendor is pretty much bugles, therefore any bugs you face, Report them to the appropriate Threads of the GSI you installed. or github issues section. as those are not mine to fix. i only provide the vendor and kernel that allows GSIs to run on.
- STEPS FOR INSTALLING TREBLE VENDOR:
Flash “Treble_Jx30F.img” in TWRP as Image (Selecting RECOVERY)
Reboot recovery.
Wipe System, Data, Dalvik and Vendor.
Flash "jxy17lte_Vendor_9.0_v1.0.zip".
- STEPS FOR INSTALLING GSIs:
Download the desired GSI (it MUST be arm_binder64/A64 Variant)
unpack it if it wasn't in .IMG format
Go to TWRP , Install , Install IMAGE
Pick your GSI and select SYSTEM IMAGE
Flash "GSI_Patch.zip".
[OPTIONAL] Flash the “Gapps_patched.zip”
- STEPS FOR INSTALLING GAPPS:
If you flash Gapps, Google will spam you with fullscreen warnings and notifications about your device not being certified. But don't worry, you can certify it.
Just reach the homescreen, then proceed to install the "Device ID.apk". Use it to grab the Google Services Framework ID and paste it here: https://www.google.com/android/uncertified/
And paste the ID there. Then wait a few minutes and reboot. Few seconds after rebooting, you'll be done and you'll be able to normally log in as always.
- [OPTIONAL]STEPS FOR INSTALLING Magisk_GAPPS:
** Note : This gapps is recommended for all **
Download latest gapps from http://opengapps.org
place in /sdcard or /external_sd
flash magisk.zip
flash magiskgapps.zip
- Confirmed working GSIs :
** You can only use ARM_BINDER64 / A64 GSIs **
PHH AOSP V113 : Github
OmniROM GSI : XDA
Liquid Remix : GoogleDrive
Pixel Experience With Gapps : GitHub
Resurrection Remix : RR
XenonHD : TeamHorizon
P.S : only Omni and PHH Do not require the GSI_PATCH_FP The rest do in order to get Fingerprint working
- Known GSI Bugs:
Bluetooth calls are broken
Some 3rd party cameras have stretched pictures
And more here at Github Issue
Credits
@corsicanu For general help through out the years
@prashantp01 For overlay fixes and native camera fix. and other contributions
@Kique119 For his awesome testing and documenting this project
Testers :
@Kique119 @LuanTeles @ion1s @djedjy @vsmhell @fetaiharbin @Mizo2019 @Me2 @LelMwhLwl
And few more that didn't give me their usernames
Downloads. Changelogs , F.A.Qs below
XDA:DevDB Information
Project Spaget. Treble ARM64 Vendor, ROM for the Samsung Galaxy J7
Contributors
ananjaser1211, corsicanu, Astrako
Source Code: https://github.com/ananjaser1211/Helios_7870
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: Latest bootloader and modem
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: X
Stable Release Date: 2020-01-13
Created 2019-07-31
Last Updated 2020-01-13

Downloads and changelogs
NewsChannel : Telegram
Come hang with us on our chat : Telegram
Official Treble support Group : Telegram
----------------------------------------------------------------
SpagetX Treble ARM64 Vendor Based on G965F VNDK-28
GoogleDrive : Download
P.S : If you failed to download please login and save the folder
P.S 2 : This requires Pie bootloader and modem on devices that supports them (I.E not j710 or g610)
----------------------------------------------------------------
Spaget Treble ARM64 Vendor V3.0 Based on A750FN Vendor
MegaDrive Download : MEGA
GoogleDrive Mirror : GDrive
Documentation : Here
Spaget X
- ReMade fully based on VNDK-28 S9 Vendor
- Based on Project Pizza Treble (8890)
- included most fixes for audio, webview and others
- added fixes for camera
- removed alot of obsolete hacks
- samsung offline charging added
- Re-did props and features and overlays
- Added patches for Android 10 Roms
- Fixed nuke.sh script on 10 roms
- fixed performance in some GSIs
- Fixed thermal , power , memtrack and other HALs
- Improved OMX fixes
- Removed alot of samsung security services
- Improved Wifi, NFC, graphics , camera and other fixes
- Fixed some reboots on G610
- Fixed Youtube Crashes and OMX issues on most devices
- Addressed alot of random reboots
- Fixed GNSS/GPS on some variants
- Removed HKTweaks due to reboots
- Fixes for J710 Wifi and bluetooth
- Tons of other changes and improvments
[COLOR=""]Spaget V3.0[/COLOR]
- Fully based on A750FN 64Bit Vendor
- Seamlessly integrated ALL patches into the vendor
- No longer do you need customized TWRPs, patches, zips whatever. just the vendor and GSI
- Fixed all the VENDOR related issues we had
- Audio, camera, NFC, everything is redone from scratch and improved
- Supports Android Q booting
- Updated overlays and configs
- Added support for J710/J701/G610
- Updated to Helios V4.0 Kernel with tons of changes and goodies
- Automatic GSI patching at first boot
- New repartition script with extended support. fail safes, backup features and tons more
- Live TWRP patching, so it will patch whatever twrp you have instead of using my own
- And tons more through out the months of testing, using and developing
- Please read the thread agian to understand how to use it
OLD(a64)
----------------------------------------------------------------
Treble Vendor V1.5 Based on Stable A600FN Pie Vendor
Full TREBLE Documentation and guides here : GoogleDocs
Treble folder mirror : MEGA
Treble Vendor V1.0 Based on Stable A600FN Pie Vendor
GoogleDrive Project : Download
Full TREBLE Documentation and guides here : GoogleDocs
Treble folder mirror : MEGA
---------------------------------------------------------------
V1.5
1- HeliosPro 3.1 Kernel
2- Added HKTweaks
3- Fingerprint fix for All GSIs
4- Hotspot fix for All GSIs
5- AdaptiveBrightness
6- Updated included overlays with more features and pie base
7- DualbootPatcher J5/J7 Seperation
GSI_PATCH_V2.0
1- Patch fingerprint libs for all GSIs
2- Switch to samsung fingerprint
3- Add device model number detection
4- replace gsi fingerprint with stock one
GSI_PATCH_FP
1- Special patch for PE/RR/LR and other roms that do not have working FP
2- Do not flash on OMNI/PHH
3- Must be flashed AFTER the Vendor/GSI
Kernel updates
- Updated base to latest pie source
- reworked and updated helios ramdisk tweaks
- Reverted old hacks to fix some bugs
- Performance and battery greatly improved
- F2FS enabled
- LZ4 Enabled
- GPU Performance Greatly improved
- Full CPU/GPU/DEVFREQ/MIF/CAMERA Voltage control and more
- Magisk V19.1 included
Bugs :
1- some users might face SDCard issues while using PE
- if you did , back up its data and format it in PE
V1.0
-initial release
- Helios Kernel 2.8

F.A.Q
Q: Device requirements ?
A : you MUST be on an Pie Bootloader and Modem, otherwise you will have no sim, no lockscreen etc (Devices such as J710 and G610 can use OREO)
Q : Do i need to format internal storage ?
A : No
Q : Can i use the Treble recovery for normal ROMs ?
A : Yes, it is preferred especially when making backups. just be sure to wipe vendor when switching to non treble roms
Q : What Camera is recommended ?
A : Footej and open camera works the best
Q : Can i flash any GSIs ?
A : Any GSI that is ARM64_AONLY is supported [8/9/10]

Enjoy, and please report any issues you face HERE and not in the other threads.
And read the thread few times before asking. Yes this supports your J701 device

Very nice job as always, keep up the good work

Error
ananjaser1211 said:
Enjoy, and please report any issues you face HERE and not in the other threads.
And read the thread few times before asking. Yes this supports your J701 device
Click to expand...
Click to collapse
After flashing create vendor file I flash Exynos7870_ProjectSpaget_V3.0. Zip file it shows symlink fail and error 7 . So I cannot flash any rom or gsi image plz help me ..... please make a correct vendor for j7 nxt and solve symlink error or also tell how to download gsi in j7 nxt step by step.......... please please . I download A64_A_20191205.img gsi for this process.... plz solve this isssue
---------- Post added at 05:29 PM ---------- Previous post was at 05:11 PM ----------
Technical Star09 said:
After flashing create vendor file I flash Exynos7870_ProjectSpaget_V3.0. Zip file it shows symlink fail and error 7 . So I cannot flash any rom or gsi image plz help me ..... please make a correct vendor for j7 nxt and solve symlink error or also tell how to download gsi in j7 nxt step by step.......... please please . I download A64_A_20191205.img gsi for this process.... plz solve this isssue
Click to expand...
Click to collapse
And tell me which rom I use for gsi

Technical Star09 said:
After flashing create vendor file I flash Exynos7870_ProjectSpaget_V3.0. Zip file it shows symlink fail and error 7 . So I cannot flash any rom or gsi image plz help me ..... please make a correct vendor for j7 nxt and solve symlink error or also tell how to download gsi in j7 nxt step by step.......... please please . I download A64_A_20191205.img gsi for this process.... plz solve this isssue
---------- Post added at 05:29 PM ---------- Previous post was at 05:11 PM ----------
And tell me which rom I use for gsi
Click to expand...
Click to collapse
because you flashed a rom before that changed your partitions, H ROM or so. you need to revert to stock partitions using pit file. instructions on how to do that are written in the documentation and our group
i use pixel experience

Request
ananjaser1211 said:
because you flashed a rom before that changed your partitions, H ROM or so. you need to revert to stock partitions using pit file. instructions on how to do that are written in the documentation and our group
i use pixel experience
Click to expand...
Click to collapse
Give me chat link and pit file link plz I cannot install any gsi ....

I did the steps that you wrote, all was well but when i try to boot, it stucks at black screen. What should i do now?

Error
I have error
I am flash exynos 7870 vendor creador but afther apear
Can't mount vendor partition afther flashing project spaget v3 :crying:
Using j701m device, some solution or something i'm wrong
which version of trwp should you use,something additional must be installed
Sorry for bad english, GSI file is compatible

How to match device requirements?
ananjaser1211 said:
Q: Device requirements ?
A : you MUST be on an OREO Bootloader and Modem, otherwise you will have trouble
Q : Do i need to format internal storage ?
A : No
Q : Can i use the Treble recovery for normal ROMs ?
A : Yes, it is preferred especially when making backups. just be sure to wipe vendor when switching to non treble roms
Q : What Camera is recommended ?
A : Footej and open camera works the best
Q : Can i flash any GSIs ?
A : Any GSI that is ARM64_AONLY is supported [8/9/10]
Click to expand...
Click to collapse
How do I get the oreo bootloader and modem. I did the steps mentioned in the 1st thread and I was able to boot the different gsi roms I tried but after a few seconds after boot I got System IU errors and the phone frozen. maybe is the bootloader. Thanks.

Pixel Experience not working mic

Jukmisael said:
Pixel Experience not working mic
Click to expand...
Click to collapse
Very good work, thank you.Can't install Xposed,it's not supported?

I'm on oreo aosip rom
Can i use this project without pit file?

Dialer and video not working in any gsi
Camera aslo not working in mostly gsi roms

Qorgeous project, I trudge.Thank the Creator!!!

When will the camera be fixed?

Getting error msg after booting fr the first time!!
I have used "pixel experience" gsi on my sm-j701f . After first boot of this rom i getting error msg frm several apps like "Messenger is not responding" . The rom feels too much laggy for my device. I have no idea about the reason of this prblm. Any solution for this????? i have also used other gsis like aosp and havoc os. None of them worked fr me. Getting error messages on this rom too.
Give me solution please???

Recovery
Best Project Great Job

Great project, thanks to the Creator, but there is one serious question: Footej Camera the weakest link(constantly defocused when shooting video, it's just annoying) is it possible to adapt some other camera, such as Open Camera?

[SAR][Vendor][10][A530F/A530W/A730F] Vendor Quack V2.5 For Galaxy A8/A8+ 2018

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm not responsible for whatever damage this could possibly cause to your device.
Before Starting Make Sure You Treble Your Device By This Guide here​ If you appreciate the work i have done, and want me to continue working on this projet, Feel free to buy me a cup of coffee @paypal
Introducing Quack Vendor For Galaxy A8/A8+ 2018 ONLY FOR A530F/A530W/A730F​
Some information you should know..
Full TREBLE Documentation here : https://source.android.com/devices/architecture
Generic System Image (GSI) Documentation here : https://source.android.com/setup/build/gsi
After a battle that took months on end, we have finally Stabled - Vendor Quack for our beloved Galaxy A8/A8+. Ive taken my time With this project and spent more time trying to improve the experience as much as possible.
GSIs are not the most stable and many users prove they are unable to read. they just want ready stuff. with this project that is not the case. if you skip the instructions/F.A.Qs and notes, dont bother installing this project as you probably wont be able to get it running.
Our device don't have Official ANDROID 10 Support, So this is first ever ANDROID 10 implementation to support AOSP GSI's. This is a fully featured System-as-Root VENDOR and KERNEL designed for this device to support ANDROID 10. Changelog listed below !
- VENDOR FEATURES:
Wi-Fi & Hotspot
Telephony & Ril (Mobile Data, Calls, SMS, MMS)
NFC
Bluetooth
GPS
Camera
Fingerprint
All Sensors
- STEPS FOR INSTALLING TREBLE VENDOR:
Make Sure You Treble Your Device By This Guide here
Boot into Twrp recovery
Wipe System, Data, Dalvik and Vendor.
Select Vendor_Quack.zip
- STEPS FOR INSTALLING GSIs:
Download the desired GSI (it MUST be A/B_arm64 Variant)
unpack it if it wasn't in .IMG format
Go to TWRP , Install , Install IMAGE
Pick your GSI and select SYSTEM IMAGE
Reboot to System
- STEPS FOR INSTALLING GAPPS
Download the appropriate opengapps
Go to TWRP , Install
Pick your OpenGapps.zip
Reboot to System
- KNOWN BUGS:
None
Credits:
- @TaifAljaloo , @somadsul and @soulr344 for tons of contribution on this project
Downloads. Changelogs , F.A.Qs below
XDA:DevDB Information
Vendor Quack For Galaxy A8/A8+ 2018, ROM for the Samsung Galaxy A8 (2018)
Kernel Sources: https://github.com/prashantpaddune/android_kernel_samsung_jackpotlte
Contributors
prashantp01
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Current Stable Version: v2.5
Current Beta Version: V1
Created 2020-09-02
Last Updated 2020-10-06

Come hang with us on our chat : Telegram
----------------------------------------------------------------
Vendor Quack V2.6 [LATEST] - AOSP GSI
Vendor Quack v2.6 : Gdrive
Generic System Image (list) : Github
Vendor Quack V2.5 - AOSP GSI
Vendor Quack v2.5 : Gdrive
Vendor Quack V2.0 - AOSP GSI
Vendor Quack v2 : Gdrive
Vendor Quack V1.0 - ONEUI / AOSP GSI
Vendor Quack v1 : Gdrive
---------------------------------------------------------------
V2.6
- Fixed Double-tab-to-wake on AOD, thnx to @VDavid003
V2.5
- Fixed Auto-Brightness
- Fixed Always on Display
- Updated Wireless Drivers
- Improved Wifi Mac randomisation
- Fix issues with exFat/vFat Sdcards
- Many other overlay fixes
Quantum Quack v1.0
- Upstreamed Linux 4.4.177
- WireGuard Support
- OC Little to 1.7Ghz
- UC big/Little to 200/500MHz
- DriveDriod Support
- Multi CPU Governors
- Multi I/O Schedulers
- Multi TCP Algorithms
- Wakelock Blocker v1.1
- Power Efficient Workqueue
- Disabled Modules
- Disabled Audit
- Disabled TRACE_PRINTK
- Improved fingerprint wake performance
- Updated new Wakelock list
- Fixed Bluetooth issues on GSI
- StateNotifier
- Fsync Toggle on/off
- Cpumask for BIG and LITTLE CPU clusters
- Security Related Features disabled
and many more....
V2.0
- Fixed Camera
- No longer supports ONEUI
- Supports Android 11 GSI
V1.0
-initial release

F.A.Q
For more details related to this project, read our dedicated Wiki page here.
Q : Do i need to format internal storage ?
A : No
Q : Do it support Android 11 GSI ?
A : Yes, make sure you download arm64-A/B-vndklite GSI
Q : Can i use the Treble recovery for normal ROMs ?
A : Yes, just be sure to wipe vendor when switching to non treble roms
Q : Can i flash any GSIs ?
A : No, only A/B_ARM64 Are supported
Q : Can i flash any sGSIs ?
A : No unless they match the Arch above

Hope we see cam fix soon...
Thanks for evolutionary release before Sammy...

This deserves a GGWP. Keep up guys!

thanks for your hard work!

Hey, great effort!
One question. Right now I have to install A-only arm64 ROMs but to install this Quack ONE UI ROM I the install A/B arm64 variant?
Does that mean that I have to install the SaR patch and kernel for Pie Vendor ?

Tnks for this rom .Plz fix cam

mementomorinl said:
One question. Right now I have to install A-only arm64 ROMs but to install this Quack ONE UI ROM I the install A/B arm64 variant?
Click to expand...
Click to collapse
After installing this vendor, you'll need A/B (well, not really a/b but it's labelled like that) GSIs.
mementomorinl said:
Does that mean that I have to install the SaR patch and kernel for Pie Vendor ?
Click to expand...
Click to collapse
No, that's for the Pie vendor.

mementomorinl said:
Hey, great effort!
One question. Right now I have to install A-only arm64 ROMs but to install this Quack ONE UI ROM I the install A/B arm64 variant?
Does that mean that I have to install the SaR patch and kernel for Pie Vendor ?
Click to expand...
Click to collapse
No, you have to use only the files which are there on this thread

prashantp01 said:
If you appreciate the work i have done, and want me to continue working on this projet, Feel free to buy me a cup of coffee @paypal
Click to expand...
Click to collapse
hishem said:
Tnks for this rom .Plz fix cam
Click to expand...
Click to collapse

Thanks for your work ! I'll try asap

Very nice job!
:good: Respect! Just a question, does Volte and Vowifi work like on stock Pie rom?

theleogetz said:
:good: Respect! Just a question, does Volte and Vowifi work like on stock Pie rom?
Click to expand...
Click to collapse
Nope!

Thanks!
Unfotunatelly, Volte will be important in the future as a lot of carrier will stop or already stopped to provide mobilenet on 3G, only voice... So if somebody calls somebody then no internet during calls (sometimes it is needed like Waze)... But a solution could be Viber, Whatsapp etc...)

theleogetz said:
Unfotunatelly, Volte will be important in the future as a lot of carrier will stop or already stopped to provide mobilenet on 3G, only voice... So if somebody calls somebody then no internet during calls (sometimes it is needed like Waze)... But a solution could be Viber, Whatsapp etc...)
Click to expand...
Click to collapse
4g works, just enable LTE from network settings, VoLTE related stuffs will never work on AOSP, as we have exynos

To prashantp01
Man, I wanna work on the project too. We have to steal some kernel extensions from the A-only GSI Vendor as OpenGL, Vulkan are somewhat broken and camera is not working. The OneUI 2.0 GSI does see the phone as a Galaxy M20 and therefore not allowing for Always On Display, a feature that can't be missing, and that is the case due to the Galaxy M20 being a TFT LCD phone, not a OLED one... I don't quite know what you did, since I cannot boot with modified build.prop, to report the right phone model, the right hardware version, and the right CPU, since there is Exynos 7885 in the A8, and not the Exynos 7904. Anyway, I would like to work on the project. Maybe we get OneUI 2.5 on this thing and get the OpenGL (which is buggy - runs Minecraft @18fPS when it should exceed 50, and Dolphin crashes instantly) and Vulkan (which is not supported at all in this vendor) to work properly.

dosdoktor said:
Man, I wanna work on the project too. We have to steal some kernel extensions from the A-only GSI Vendor as OpenGL, Vulkan are somewhat broken and camera is not working. The OneUI 2.0 GSI does see the phone as a Galaxy M20 and therefore not allowing for Always On Display, a feature that can't be missing, and that is the case due to the Galaxy M20 being a TFT LCD phone, not a OLED one... I don't quite know what you did, since I cannot boot with modified build.prop, to report the right phone model, the right hardware version, and the right CPU, since there is Exynos 7885 in the A8, and not the Exynos 7904. Anyway, I would like to work on the project. Maybe we get OneUI 2.5 on this thing and get the OpenGL (which is buggy - runs Minecraft @18fPS when it should exceed 50, and Dolphin crashes instantly) and Vulkan (which is not supported at all in this vendor) to work properly.
Click to expand...
Click to collapse
Well i have fixed everything, even camera will release when i'm free NO ETA

Waiting eagerly...

How much will we have to wait? Is there anything we can do ourselves?
I don't quite like to see one doing the whole work by himself, so I would like to help. What's left to do? I have a linux machine set up and a phone to test modifications step by step. All I need is to know which modifications to add to current vendor build (I really need the good OpenGL+ Vulkan libraries).

ROM][UNOFFICIAL][11.0][RMX2020] Pixel Experience Plus [AOSP] [OSS VENDOR]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience Plus for Realme C3/Realme Narzo 10A
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 11.0
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FMRadio
Fingerprint reader
Lights
Sound / vibration
CTS
Known issues
Permissive
NFC
Unencrypted
You tell more
Changelog
Initial VNDK30 OSS Vendor based Build
Shipped with NEOLIT V4 upstreamed to the latest 4.14.241
DON'T FLASH GAPPS, ALREADY INCLUDED
Download
EGIS FIX MAGISK MODULE FIX
Android OS version: 11
Security patch level: July 2021
Build author/Device Maintainer: Sarthak Roy and imranpopz
Kernel Source: https://github.com/sarthakroy2002/kernel_realme_rmx2020
Device Source code: https://github.com/sarthakroy2002/device_realme_RMX2020
Source code: https://github.com/PixelExperience
ROM Developer: jhenrique09
XDAevDB Information
PixelExperience 11, ROM for the Realme C3/Narzo 10A
Contributors
jhenrique09, lakshay18
Source Code: https://github.com/PixelExperience
ROM OS Version: Android 11
ROM Kernel: Linux 4.14.x
Based On: AOSP
Version Information
Status: Stable​

Changelog:
- Initial VNDK30 OSS Vendor based Build
- Shipped with NEOLIT V4 upstreamed to the latest 4.14.241
Bugs:
- Vibration is low
- Offline charging animation works with some issues but it charges
- Unencrypted and Permissive
Please Report more bugs to get it fixed
Credits:
This is joint effort by imranpopz and sarthakroy2002, We would like to thank the following guys:
- Kudos to Techyminati, kardebayan, Elias and Sakthivel for the whole journey
- Kudos to the whole Redmi MT6768 team for helping, mainly Sparxfusion (Sakthivel) and pizzeria
- Kudos to Irawan for the EGIS/ET512 fix
- Thanks to Inder and Witcher for helping with initial Trees, Himanshu and Samar for many helps
- Thanks to all our testers : Zidane, Mr H, ksurf and Felix Andi, RJ and Firefly
- Thanks to Agent fabulous and other begonia devs

OSS Vendor Based Custom Rom Flashing Guide
1. Unlock bootloader
2. Flash PBRP
3. Flash any OSS VNDK30 based custom rom
4. Flash GAPPS (if needed)
5. Flash magisk (https://github.com/topjohnwu/Magisk/releases) (optional)
6. Format data
7. Reboot system
Note:- your device must be on Stock realme UI 1.0 A.33+, flashing from any other Custom Rom or realme UI 2.0 doesn't work &
If you are in any Custom Rom, do fastboot unbrick to get to Stock Rom... then flash it like the above process... or flash Havoc 4.2 or Nusantara 3.0 then flash OSS Vendor Roms

I am getting this issue tho:
I was trying to clean flash this one to no avail. Care for any assistance on this one?

blakegriplingph said:
I am getting this issue tho:
View attachment 5381645
I was trying to clean flash this one to no avail. Care for any assistance on this one?
Click to expand...
Click to collapse
You need to flash Stock ROM first...then the ROM

sarthakroy2002 said:
You need to flash Stock ROM first...then the ROM
Click to expand...
Click to collapse
Aight, noted. You did however suggest that I can flash HavocOS 4.2 first then flash any OSS vendor ROM such as PixelPlus. Are you sure about that?

So I got the ROM to boot now, and everything including the et512 fingerprint sensor works. There is however one major issue: attempting to use wireless display mode crashes the phone, causing it to restart.
Also, apparently installing Magisk greatly affects battery life, at least with Magisk 22.x. Magisk 23 simply locks up the phone on boot unless you force restart it to fastboot mode and re-flash the stock boot image. In that case I was wondering if the fingerprint fix could be flashed the old fashioned way rather than as a Magisk module.

blakegriplingph said:
So I got the ROM to boot now, and everything including the et512 fingerprint sensor works. There is however one major issue: attempting to use wireless display mode crashes the phone, causing it to restart.
Also, apparently installing Magisk greatly affects battery life, at least with Magisk 22.x. Magisk 23 simply locks up the phone on boot unless you force restart it to fastboot mode and re-flash the stock boot image. In that case I was wondering if the fingerprint fix could be flashed the old fashioned way rather than as a Magisk module.
Click to expand...
Click to collapse
Its a dynamic partition thing... Magisk needs to be flashed while flashing the room or u have to use the patched boot thing
Add the ET512 FP stuff in the rom will break the other fp sensors... Also its a BETA ROM

sarthakroy2002 said:
Its a dynamic partition thing... Magisk needs to be flashed while flashing the room or u have to use the patched boot thing
Add the ET512 FP stuff in the rom will break the other fp sensors... Also its a BETA ROM
Click to expand...
Click to collapse
I see. Hope there's a way around it tho.

help me my cellphone from earlier rebooted into fastboot

help me my cellphone from earlier rebooted into fastboot, problem vendor how to solve it?

sarthakroy2002 said:
PixelExperience Plus for Realme C3/Realme Narzo 10A
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 11.0
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FMRadio
Fingerprint reader
Lights
Sound / vibration
CTS
Known issues
Permissive
NFC
Unencrypted
You tell more
Changelog
Initial VNDK30 OSS Vendor based Build
Shipped with NEOLIT V4 upstreamed to the latest 4.14.241
DON'T FLASH GAPPS, ALREADY INCLUDED
Download
EGIS FIX MAGISK MODULE FIX
Android OS version: 11
Security patch level: July 2021
Build author/Device Maintainer: Sarthak Roy and imranpopz
Kernel Source: https://github.com/sarthakroy2002/kernel_realme_rmx2020
Device Source code: https://github.com/sarthakroy2002/device_realme_RMX2020
Source code: https://github.com/PixelExperience
ROM Developer: jhenrique09
XDAevDB Information
PixelExperience 11, ROM for the Realme C3/Narzo 10A
Contributors
jhenrique09, lakshay18
Source Code: https://github.com/PixelExperience
ROM OS Version: Android 11
ROM Kernel: Linux 4.14.x
Based On: AOSP
Version Information
Status:​
Click to expand...
Click to collapse

Developer Bro, Please help me . Your Pixel Experience ROM(OSS Vendor) is fantastic but now I want to swich to another ROM but I can't because system is getting unmount is displaying : "assert failed : dynamic partitions." I am a simple user . Please tell me how do can I install any other ROM just like before??

[email protected] said:
Developer Bro, Please help me . Your Pixel Experience ROM(OSS Vendor) is fantastic but now I want to swich to another ROM but I can't because system is getting unmount is displaying : "assert failed : dynamic partitions." I am a simple user . Please tell me how do can I install any other ROM just like before??
Click to expand...
Click to collapse
Flash a stock ROM using SP Flash Tool then install the ROM you want.

Update has been rolled out.. check my sf

Hello,
I installed the ROM and when I connected Bluetooth headphones but doesn't sound in to the headphones, sound the phone's speakers, I wipe and reinstall the ROM but present the same problem. Thank you for the ROM, blessings

I'm trying to unlock bootloader in my realme narzo 10a RMX2020.
But in deeptest mode adb is not detecting my device. How to fix?