Related
I followed the previously rooted guide to update to 9.5.9 and now when the phone reboots, it gets to the unlock screen and immediately tells me its shutting down and reboots back into twrp again. How do i fix this? Please help and thank you.
what method did you use (there are a million rooted guides)? did u get the correct OS OTA for you model phone? provide us more info please.
Looks like i forgot to turn off the magisk modules. I had to go into twrp and delete them all and re download the modules. silly me
I'm having a similar issue. I can't figure out what to do, but I i went and deleted all the zip files for magisk but after reinstalling magisk thru twrp, I get stuck booting to recovery everytime. I can someone help point me in the right direction?
jakemaxfield said:
I'm having a similar issue. I can't figure out what to do, but I i went and deleted all the zip files for magisk but after reinstalling magisk thru twrp, I get stuck booting to recovery everytime. I can someone help point me in the right direction?
Click to expand...
Click to collapse
I stuck at the same situation. Can you flashboot flash boot.img and then it can boot normally?
Same problem here.
Situation before flash: stock 9.5.8, Magisk, a number of Magisk modules
What I did:
* downloaded 9.5.9 with Oxygen Updater
* disabled Magisk modules
* rebooted
* installed 9.5.9 from the builtin System Update
* went to Magisk, installed it with After OTA
* rebooted to recovery
* installed TWRP and Magisk
* cleared Dalvik
* rebooted to system
The phone seems to start normally, but when it reaches the unlock screen it immediately goes to Power Off, then it reboots to TWRP (not power off). From TWRP I can decrypt data ok etc.
I tried reinstalling the boot loader, OTA image, TWRP, Magisk - same result. Rebooting to system from TWRP just goes back to Power Off then TWRP.
equlizer said:
I followed the previously rooted guide to update to 9.5.9 and now when the phone reboots, it gets to the unlock screen and immediately tells me its shutting down and reboots back into twrp again. How do i fix this? Please help and thank you.
Click to expand...
Click to collapse
If this is any help in the future, whilst I don't have twrp, I install the updates via local update in settings > system > updates and then before reboot I go to magisk manager, and install magisk to second slot and reboot. Never had a problem and I'm on 9.5.9 now. The only modules I disable, update, or remove are the magisk ROMs available here such as no limits, as they are usually version specific.
manor7777 said:
If this is any help in the future, whilst I don't have twrp, I install the updates via local update in settings > system > updates and then before reboot I go to magisk manager, and install magisk to second slot and reboot. Never had a problem and I'm on 9.5.9 now. The only modules I disable, update, or remove are the magisk ROMs available here such as no limits, as they are usually version specific.
Click to expand...
Click to collapse
That's exactly what I did. It landed me to the bootloop.
All you guys had to do is,
Install the full uddate zip in twrp,
Install the latest twrp zip,
Reboot recovery,
Install latest magisk,
Reboot system,
Hope this helps, cheers
Update: I can break out of the loop from TWRP > Advanced > Fix Recovery Bootloop. That lets me boot normally, but loses root. As soon as I reinstall Magisk I get back to the bootloop.
lcd047 said:
Update: I can break out of the loop from TWRP > Advanced > Fix Recovery Bootloop. That lets me boot normally, but loses root. As soon as I reinstall Magisk I get back to the bootloop.
Click to expand...
Click to collapse
I'm in the same boat.
My twrp doesn't offer to decrypt partition_b so I cannot manually install Magisk on the new partition.
This seems to be a common problem when updating rooted Oneplus 7 pro and I haven't found a update guide which actually works every time. Last update to 9.5.8 I had the same issue where I couldn't get into oxygen os because it turned itself off and when twrp opened I couldn't decrypt the data. I couldn't find a solution last time and I had to full wipe and start from scratch. Now I don't want the same to happen so I hope someone can post a guide how to do the update successfully.
sapalot said:
This seems to be a common problem when updating rooted Oneplus 7 pro and I haven't found a update guide which actually works every time. Last update to 9.5.8 I had the same issue where I couldn't get into oxygen os because it turned itself off and when twrp opened I couldn't decrypt the data. I couldn't find a solution last time and I had to full wipe and start from scratch. Now I don't want the same to happen so I hope someone can post a guide how to do the update successfully.
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-7-pro/how-to/successfully-upgraded-to-9-5-7-t3937414.
Works every time, the same way I have been doing for both 6T and 7 Pro.
Sometimes you might be on the wrong active slot, you can change this by using fastboot set_active a or fastboot set_active b. TWRP seems to like changing your slot but will tell you when it does. If you're getting stuck try changing slot and booting.
schmeggy929 said:
https://forum.xda-developers.com/oneplus-7-pro/how-to/successfully-upgraded-to-9-5-7-t3937414.
Works every time, the same way I have been doing for both 6T and 7 Pro.
Click to expand...
Click to collapse
It worked for me for 9.5.8, got the bootloop this time around. I guess this means I'm not the Chosen One.
---------- Post added at 03:37 PM ---------- Previous post was at 03:34 PM ----------
djsubterrain said:
Sometimes you might be on the wrong active slot, you can change this by using fastboot set_active a or fastboot set_active b. TWRP seems to like changing your slot but will tell you when it does. If you're getting stuck try changing slot and booting.
Click to expand...
Click to collapse
I tried that too. When I switch to the other slot I get to a menu where I can only wipe data, reboot to boot loader, or reboot to recovery. Not particularly useful.
Hey guys!
I'm having the same problem. No matter how I try to update it will reboot to stock recovery.
I was wondering if any of you have /Data converted to f2fs? Maybe it could be culprit...
mkos86 said:
Hey guys!
I'm having the same problem. No matter how I try to update it will reboot to stock recovery.
I was wondering if any of you have /Data converted to f2fs? Maybe it could be culprit...
Click to expand...
Click to collapse
What I had to do here was go to fastboot mode and flash twrp img. Then in TWRP I flash the TWRP zip file and magisk and rebooted. All good
Alright so I fixed mine. I went and just removed all the modules while I was in twrp. To do that go to Advanced, then file manager or whatever it says, find the adb folder and from there look for a folder named Modules and just delete them all. From there just reinstall magisk through twrp and it should all work.
jakemaxfield said:
Alright so I fixed mine. I went and just removed all the modules while I was in twrp. To do that go to Advanced, then file manager or whatever it says, find the adb folder and from there look for a folder named Modules and just delete them all. From there just reinstall magisk through twrp and it should all work.
Click to expand...
Click to collapse
Thank you sir, this fixed it for me, too. So the missing link was that Magisk modules have to be removed completely, not just disabled, before upgrading. Removing all directories except .core from /data/adb/modules allows the phone to boot normally, with Magisk enabled.
schmeggy929 said:
https://forum.xda-developers.com/oneplus-7-pro/how-to/successfully-upgraded-to-9-5-7-t3937414.
Works every time, the same way I have been doing for both 6T and 7 Pro.
Click to expand...
Click to collapse
Thats the way i tried that time and got stuck in bootloop.
Like the title says, I can´t boot to recovery (Oneplus one). If I try to boot to recovery, I´m ending in the Qualcomm CrashDump Mode.
I have a Oneplus 7 Pro with Stable 10.0 BA FW.
Rooted with Magisk (Patched Boot.img) Is this causing the problem?
After pressing Vol+ and powerbutton, the devices boots normally.
Thanks in advance.
RealDanyo said:
Like the title says, I can´t boot to recovery (Oneplus one). If I try to boot to recovery, I´m ending in the Qualcomm CrashDump Mode.
I have a Oneplus 7 Pro with Stable 10.0 BA FW.
Rooted with Magisk (Patched Boot.img) Is this causing the problem?
After pressing Vol+ and powerbutton, the devices boot normally.
Thanks in advance.
Click to expand...
Click to collapse
I had the same issue this morning when trying to update to 10.0.1. Just boot to bootloader and boot twrp then install 10.
I think is the magisk update (magisk 20.0) that causes this, because it's happening to me in the beta 3 and before I updated magisk it was working fine with the beta 2
ItsTecnoDavid said:
I think is the magisk update (magisk 20.0) that causes this, because it's happening to me in the beta 3 and before I updated magisk it was working fine with the beta 2
Click to expand...
Click to collapse
I have no issues with magisk or twrp.
It might be the way you are installing ota or rom.
Might be model specific not sure as I don't know what model you are on. Mine is GM1915.
I'm talking about the official recovery
GM21AA, exactly the same situation (from 10 stable to 10.0.1 and magisk from 19.4 beta to 20) and the stock recovery bump into Qualcomm Crashdump problem here, system bootup normal as well as bootloader.
Troubleshooting:
1. Local update twice, install magisk at inactive slot OTA before reboot, for Android 10's A/B partitions machinasm , try let magisk patch both boot.img. Same...
2. Local update and reboot, lost root but stock recovery work, Fastboot boot twrp.img (latest, not flash, cause I don't need the permanent twrp)->twrp install magisk, reboot system, then, again, same problem.
Todo:
Magisk manager or twrp uninstall magisk, but if it's fail maybe ended up to bootloop, scary.
May try to install back old 19.4 magisk.zip via twrp, it's working in 10.0.0
Anyone with the same problem have any idea?
Thats the exact same error I ran into.
But as mentioned earlier, I never had TWRP on my OP7P. I flashed the patched boot.img via adb and I´m still on 10.0 BA Firmware.
I thought TWRP dosn´t work on Android Q (I´m coming from an Pixel3 and there it won´t work) So maybe I will give TWRP a try tomorrow. Are there different versions or is the official one the best?
RealDanyo said:
Thats the exact same error I ran into.
But as mentioned erlier, I never had TWRP on my OP7P. I flashed the patched boot.img via adb and I´m still on 10.0 BA Firmware.
I thought TWRP dosn´t work on Android Q (I´m coming from an Pixel3 and there it won´t work) So maybe I will give TWRP a try tomorrow. Are there different versions or is the official one the best?
Click to expand...
Click to collapse
The recovery here is the one to use.
https://forum.xda-developers.com/on...nt/recovery-unofficial-twrp-recovery-t3931322
Be sure to read through
So thanks erveryone who helped.
I now have TWRP running as recovery. So there is no need for official recovery. (and no Qualcomm CrashDump Mode)
Had this happen to me earlier this week. Just ended up using the MSM tool and restoring shipping firmware. You can look for the unbricking thread here for more info on that.
Yea, this just happened to me. Updated Magisk, Updated to 10.0.1 from 10.0. Booted fine.
Re-installed a few magisk modules (didn't just re check the modules, but reinstalled each)
Now OS won't boot, and recovery goes to Crash Dump. Would be ok if OS wouldn't bootloop and I could get to OS.
Oh, and my ADB now is an unauthorized device while its in bootloop mode
EDIT:
phew. Tried to hold volume up+dn rather than up or dn, got into bootloader. Able to fastboot boot TWRP and then delete problematic RIRU magisk modules. All is well in the world now...
I don't get it why it have to be so hard.
I'm constantly soft bricking/ bootlooping this phone when trying to do simple things such flashing magisk and twrp. I remember it being so much easier with my Poco F1, never got close to bricking it.
Now every little mistake ends with a bricked phone and 5 hours on the internet trying to understand why
WillyRy said:
Yea, this just happened to me. Updated Magisk, Updated to 10.0.1 from 10.0. Booted fine.
Re-installed a few magisk modules (didn't just re check the modules, but reinstalled each)
Now OS won't boot, and recovery goes to Crash Dump. Would be ok if OS wouldn't bootloop and I could get to OS.
Oh, and my ADB now is an unauthorized device while its in bootloop mode
EDIT:
phew. Tried to hold volume up+dn rather than up or dn, got into bootloader. Able to fastboot boot TWRP and then delete problematic RIRU magisk modules. All is well in the world now...
Click to expand...
Click to collapse
Same issue here and no TWRP installed.
I did ADB REBOOT FASTBOOT and was able to install the twrp image by FASTBOOT BOOT twrp-3.3.1-70-guacamole-unified-Q-mauronofrio.img
Going to try and remove Magisk and see if I can salvage my data and then re-install Magisk afterwards.
Ok...got back into the system by flashing the Magisk Uninstaller in TWRP that is here: https://magiskroot.net/md/Magisk_Manager_for_Recovery_Mode_(mm)-2019.4.4.zip
Went to advanced in TWRP, then to terminal, then typed mm.
Typed in C for Core only to load into system without Magisk. Deleted my Magisk modules that may have interfered with it (I had an older version of No Limit that I should have updated prior. After removing and rebooting back into system, all is fine now.
JLine05 said:
Same issue here and no TWRP installed.
I did ADB REBOOT FASTBOOT and was able to install the twrp image by FASTBOOT BOOT twrp-3.3.1-70-guacamole-unified-Q-mauronofrio.img
Going to try and remove Magisk and see if I can salvage my data and then re-install Magisk afterwards.
Ok...got back into the system by flashing the Magisk Uninstaller in TWRP that is here: https://magiskroot.net/md/Magisk_Manager_for_Recovery_Mode_(mm)-2019.4.4.zip
Went to advanced in TWRP, then to terminal, then typed mm.
Typed in C for Core only to load into system without Magisk. Deleted my Magisk modules that may have interfered with it (I had an older version of No Limit that I should have updated prior. After removing and rebooting back into system, all is fine now.
Click to expand...
Click to collapse
Yea man, things are hinkey this update.
My big problem was i had twrp but it got wiped i guess (could no longer access) and couldn't access adb nor fastboot. But finally got into bootloader (cmd fastboot) so was able to fix.
Easier solution than installing Magisk uninstaller (presuming one has twrp installed, which would be the case if able to flash Magisk uninstaller) is go to TWRP>advanced>file manager and navigate data/adb/modules and delete from there
DO you guys know if there is an updated magisk being developed or what is the way to fix it? Uninstall magisk via TWRP (since I can temporarily install and get into TWRP using the all in one tool by the TWRP developer). Then install TWRP and then Install Magisk ?
I have same problem
How to fix it and bring back stock recovery?
wawanRedblack said:
I have same problem
How to fix it and bring back stock recovery?
Click to expand...
Click to collapse
Can you boot OS?
Can you get to bootloader?
WillyRy said:
Can you boot OS?
Can you get to bootloader?
Click to expand...
Click to collapse
Yes i can boot os and bootloader is ok
Ok, so I had to reinstall my OS through TWRP (2GB Full update)... and rebooting to the Bootloader to reinstall TWRP and rebooting again, I want to install Magisk again.
When I install Magisk through TWRP and reboot, the boot animation is stuck forever and animates very slowly. The only way to get out is to press VOL UP + POWER and inmediately VOL DOWN + POWER to enter TWRP. To fix the stuck boot animation I have to reinstall the full OxygenOS update and reinstall TWRP.
My problem is that I'm in this vicious cicle where if I install Magisk it doesn't work and I have to reinstall the OS and TWRP.
What am I missing? Why Magisk is making my device stuck on the boot screen?
Any help will be appreciated. Thanks!
I had that earlier today. For me I switched to the other partition from twrp and rebooted and it worked fine. Guess I'll flash ROM and magisk to both partitions next time
skymera said:
I had that earlier today. For me I switched to the other partition from twrp and rebooted and it worked fine. Guess I'll flash ROM and magisk to both partitions next time
Click to expand...
Click to collapse
So let me make sure I understood you. I need to switch to Slot B and also install the OS and Magisk?
OK, an update. After trying to switch slots, install the OS in both of them and Magisk and all the possible permutations, I tried flashing 19.4 and it worked flawlessly first time.
Now I'm going to update it!
Update 2: I'm finally running the latest version! Updating Magisk through Magisk Manager worked fine.
Deses said:
OK, an update. After trying to switch slots, install the OS in both of them and Magisk and all the possible permutations, I tried flashing 19.4 and it worked flawlessly first time.
Now I'm going to update it!
Update 2: I'm finally running the latest version! Updating Magisk through Magisk Manager worked fine.
Click to expand...
Click to collapse
I have the same issue with the slow boot animation and the endless loading. I tried to install the OTA again, TWRP again and magisk 20.1, 20.0, 19.4 ...
Sadly the animation stays that slow and my OP7Pro doesnt boot up. How exactly did you get rid of that problem? I feel like I tried every combination of flashing
dennisgrue said:
I have the same issue with the slow boot animation and the endless loading. I tried to install the OTA again, TWRP again and magisk 20.1, 20.0, 19.4 ...
Sadly the animation stays that slow and my OP7Pro doesnt boot up. How exactly did you get rid of that problem? I feel like I tried every combination of flashing
Click to expand...
Click to collapse
I had this with PA. Not sure what caused it as my flashing process is the same every time.
In the end I gave up and formatted /data
skymera said:
I had this with PA. Not sure what caused it as my flashing process is the same every time.
In the end I gave up and formatted /data
Click to expand...
Click to collapse
I decided to give up too... Was a bad mistake. I accidentely rebooted the phone after the update today. I will never do that mistake again
That dreadful moment when you have this problem again and googling points you to your own thread with no solutions.
UPDATE: Oh I think I got it! I had to uninstall Magisk Manager AND flash Magisk Uninstaller zip, reboot to OS, reboot to Recovery again and flash Magisk 20.3 again and it finally worked! No more stuck slow boot animation.
Probably the two reboots aren't needed, but I like doing things slow.
I just purchased a new OnePlus 7 Pro yesterday and immediately set about rooting it. This is the process I followed:
fastboot oem unlock
fastboot flash boot twrp-3.3.1-4-guacamole.img
TWRP: Install > Select Storage > Internal Storage > Magisk-v20.3.zip
TWRP: Wipe > Format Data
I rebooted and was confused when I wasn't rooted. It seemed the last step had undone my root, so I went back into TWRP and installed Magisk again this time without formatting data. When I rebooted I had root and all was well.
However, there was an OEM update available that warned me it would remove root if I installed it. I found this guide to install an OEM update without losing root, which basically says to download the update via Oxygen Updater and then install it from TWRP. On step 6 is says to select the "Inject TWRP after install" option, but this didn't exist in my TWRP. I went ahead without it, thinking maybe it was enabled by default in my newer version of TWRP. The installation seemed to go without a hitch, but when I rebooted after I was stuck in fastboot. I couldn't boot my phone, nor could I get back into TWRP or regular recovery, only fastboot.
I tried flashing TWRP again using fastboot, but to no avail. I also tried running fastboot -w, but was still stuck in fastboot. I did some more research and found this comment which made it seem like all I had to do was download 10.0-GM21AA-OnePlus7ProOxygen_21.O.20_OTA_020_all_1909172051_db7a3f61-FASTBOOT from here and then run flash-all.bat. Once I did so I ended up stuck on the following screen:
Code:
QUALCOMM CrashDump Mode
--------------------------
dm-verify device corrupted Force Dump
kernel_restart
I can't seem to do anything at all with my device; not even turn it off. I tried holding the power button down for nearly a minute and no response from the phone. Is there any hope at all for my phone or have I properly destroyed it?
https://forum.xda-developers.com/oneplus-7-pro/help/mistake-kernel-error-t4029743
Same thing happened to me and I searched around a bit and found resolution. You can try what I did or try msm tool but search first as crashdump error is becoming common issue it seems
I held both volume buttons until restart and let go of one of them to get into recovery and then boot to boot loader if needed
Thank you so much! I thought I'd corrupted fastboot and permanently bricked the phone.
Once I was in fastboot I used tool all in one to flash 9.5.13-GM21AA-OnePlus7ProOxygen_21.O.16_OTA_016_all_1908281716_b2bb5-FASTBOOT.zip onto my phone by picking Flash Factory Images, and now it's back up and running.
jasons1004 said:
I held both volume buttons until restart and let go of one of them to get into recovery and then boot to boot loader if needed
Click to expand...
Click to collapse
This was the magic trick I needed to know. Holding both volume buttons didn't quite work for me. I held them both down for over a minute and nothing happened. Then I tried holding down the power button and that seemed to work after several seconds. I didn't hold down volume down quickly enough the first time, so I had to do it again. I held both volume buttons and the power button for over a minute, but again, nothing. I tried a couple more times and got it to work. Haven't been able to figure out exactly what causes it to exit the CrashDump mode, but the volume buttons together seems to be the important part.
This time I tried doing the OEM updates first, thinking that attempting to install them manually is what caused my problem. First I installed the 10.0.3.GM21AA update, then after rebooting I installed the 10.3.0.GM21AA update. At this point it said my system was up to date, so I want ahead and booted into fastboot and ran fastboot flash boot twrp-3.3.1-4-guacamole.img. No errors, but no TWRP either. My phone was stuck in fastboot again.
Is it necessary to stick with 9.5.13 if I want root? Is there some way to get TWRP to work with 10?
altayh said:
This time I tried doing the OEM updates first, thinking that attempting to install them manually is what caused my problem. First I installed the 10.0.3.GM21AA update, then after rebooting I installed the 10.3.0.GM21AA update. At this point it said my system was up to date, so I want ahead and booted into fastboot and ran fastboot flash boot twrp-3.3.1-4-guacamole.img. No errors, but no TWRP either. My phone was stuck in fastboot again.
Is it necessary to stick with 9.5.13 if I want root? Is there some way to get TWRP to work with 10?
Click to expand...
Click to collapse
Just use tool to flash 9 then after first boot fasboot flash whatever 10 build you can find. Then after first boot of 10 try boot twrp and install twrp.
Honestly I just used the tool to root and flash recovery. There is a button for that and just pick your files. Good luck
altayh said:
This time I tried doing the OEM updates first, thinking that attempting to install them manually is what caused my problem. First I installed the 10.0.3.GM21AA update, then after rebooting I installed the 10.3.0.GM21AA update. At this point it said my system was up to date, so I want ahead and booted into fastboot and ran fastboot flash boot twrp-3.3.1-4-guacamole.img. No errors, but no TWRP either. My phone was stuck in fastboot again.
Is it necessary to stick with 9.5.13 if I want root? Is there some way to get TWRP to work with 10?
Click to expand...
Click to collapse
You need to use a more recent versions of TWRP with Android 10. Current unofficial version -74 should work. So in your current condition, you should be able to simply boot TWRP (using the correct version), flash TWRP installer zip (if you want TWRP installed), flash Magisk (current version is 20.3) and reboot and you should have root again.
Easiest way I've found to install the OTA updates, is to simply install the update through the phone settings, do NOT reboot immediately after the update, go into Magisk Manager, flash TWRP installer zip as if it were a Magisk module (optional, if you want TWRP installed), then install Magisk picking the option "Install to inactive slot (after OTA)". Than just reboot, and you should be updated and with root.
redpoint73 said:
You need to use a more recent versions of TWRP with Android 10. Current unofficial version -74 should work. So in your current condition, you should be able to simply boot TWRP (using the correct version), flash TWRP installer zip (if you want TWRP installed), flash Magisk (current version is 20.3) and reboot and you should have root again.
Click to expand...
Click to collapse
Ah, I was using the Official TWRP App to get the images so I was under the impression that twrp-3.3.1-4-guacamole.img was the latest. I assume you're saying I should use TWRP 3.3.1-74 Unified Unofficial Q by mauronofrio from over here instead.
redpoint73 said:
Easiest way I've found to install the OTA updates, is to simply install the update through the phone settings, do NOT reboot immediately after the update, go into Magisk Manager, flash TWRP installer zip as if it were a Magisk module (optional, if you want TWRP installed), then install Magisk picking the option "Install to inactive slot (after OTA)". Than just reboot, and you should be updated and with root.
Click to expand...
Click to collapse
This is good to know. Thanks.
Just to follow up, I applied the available OTAs through the phone settings (up to bulid 10.3.0.GM21AA) and then followed the More articulated but fully functional instructions to install TWRP 3.3.1-74 Unified Unofficial Q. Everything went well and I'm now up to date and rooted. Thanks again to both of you!
altayh said:
I assume you're saying I should use TWRP 3.3.1-74 Unified Unofficial Q by mauronofrio from over here instead.
Click to expand...
Click to collapse
That is the correct TWRP to use ("Unofficial" version -74), as it appears you have already determined.
I don't know why the "official" versions have fallen so far behind. It's been months stuck on version -4, so it seems that they have stopped going "official" for some reason. No matter, the unofficial versions are working fine (and in fact required for Android 10 as you now know), so the "official" tag seems like a technicality.
On these OnePlus phones I don't know why they love Qualcomm Crashdump mode. I fixed it sort of like you, but this worked 100%. You hold all 3 buttons (power, vol up, vol down) and you bypass the crashdump (takes several seconds 5 maybe 10), just quickly let go so you'll be in fastboot mode and can work your magic to fix the damn thing....
I even contacted OnePlus on an 8 they had no idea what to do...
Fastboot flash boot recovery.img <-- bad idea
Fastboot boot recovery.img <-- provit
Hi all,
update: I made update at the end.
My OP7 version is GM1900, so far I was on build 10.0.6GM57BA with Magisk 20.4, but for some time I had 10.0.8 update notification.
Today I decided to update build.
I consider myself as medium experienced user the type that is using rather step by step guides.
But this time I thought I don't need guide cause I should remember how I did update last time. In the meantime I help my son to make homework what was an additional distraction.
I always download full OTA from oneplus.com support but it turned out there was no 10.0.8 (instead there was/is 10.0.7). So I tried to search for 10.0.8 and I found this xda news. As there is a mess with versions and links and I was doing it on mobile Chrome I accidentally tapped Global/India Full OTA
Steps I made:
1.1. Downloading file OnePlus7Oxygen_14.P.29_OTA_029_all_2009152124_ba2424a.zip
1.2. Downloading official TWRP twrp-installer-3.4.0-0-guacamole.zip
1.3. Boot into TWRP.
1.4. Flash twrp-installer-3.4.0-0-guacamole.zip
1.5. Restart to TWRP
1.6. Flash magisk uninstall
1.7. Flash 10.3.5 (India & Global) - OnePlus7Oxygen_14.P.29_OTA_029_all_2009152124_ba2424a.zip
1.8. Flash magisk 20.1 (but forgot to reboot after flashing TWRP it was first mistake I think)
1.9. Ended with 10.3.5 (India & Global) build with stock recovery and without Magisk.
Next I tried to return to GM57BA.
Then the steps I made:
2.1. Downloading official build 10.0.7.GM57BA from oneplus support site.
2.2. Downloading Mauronofrio's TWRP twrp-3.4.0-0-guacamole-unified-Q-mauronofrio.img and twrp-3.4.0-0-guacamole-unified-installer-mauronofrio.zip
2.3. Boot OP7 into fastboot then command "fastboot boot twrp-3.4.0-0-guacamole-unified-Q-mauronofrio.img"
2.4. After phone booted into TWRP I flashed twrp-3.4.0-0-guacamole-unified-installer-mauronofrio.zip
2.5. Restart to TWRP
2.6. Flashed magisk uninstall.
2.7. Flashed 10.0.7.GM57BA
2.8. Flashed magisk 20.4
2.9. Only then I rebooted to TWRP (I think it was mistake).
2.10. Then I saw first problem - there was no lockscreen security with TWRP (unlock pattern).
2.11. Restarted to TWRP again - the same no unlock pattern screen, no access to data partition
2.12. I started to panic and restarted into system.
2.13. I ended with hard bootloop - I mean I can't even do force reset (force reboot) by pressing and holding the Power and Volume down buttons at the same time :crying:
I'm sorry for this long description but I thought it will be helpful to diagnose what I messed up.
Questions and my thoughts:
1. Did I messed up by not restarting after last magisk flash?
2. What to do now? Do I need to wait for battery discharge? Then unbrick using MSM tool?
3. Is there any chance to repair and preserve personal data? I have TWRP backup about 3 months old. Maybe after battery discharge I should go to TWRP and then sideload this backup? Maybe magisk uninstall or stock boot image flash?
Please help
Update:
After battery discharge I managed to boot into TWRP recovery (Mauronofrio's 3.4.0.0)
Then couldn't access /data
But when I switched to Slot B and reboot to recovery situation is back to normal (I guess).
I'm still in recovery scared to boot into system.
What to do now?
kold11 said:
Hi all,
update: I made update at the end.
My OP7 version is GM1900, so far I was on build 10.0.6GM57BA with Magisk 20.4, but for some time I had 10.0.8 update notification.
Today I decided to update build.
I consider myself as medium experienced user the type that is using rather step by step guides.
But this time I thought I don't need guide cause I should remember how I did update last time. In the meantime I help my son to make homework what was an additional distraction.
I always download full OTA from oneplus.com support but it turned out there was no 10.0.8 (instead there was/is 10.0.7). So I tried to search for 10.0.8 and I found this xda news. As there is a mess with versions and links and I was doing it on mobile Chrome I accidentally tapped Global/India Full OTA
Steps I made:
1.1. Downloading file OnePlus7Oxygen_14.P.29_OTA_029_all_2009152124_ba2424a.zip
1.2. Downloading official TWRP twrp-installer-3.4.0-0-guacamole.zip
1.3. Boot into TWRP.
1.4. Flash twrp-installer-3.4.0-0-guacamole.zip
1.5. Restart to TWRP
1.6. Flash magisk uninstall
1.7. Flash 10.3.5 (India & Global) - OnePlus7Oxygen_14.P.29_OTA_029_all_2009152124_ba2424a.zip
1.8. Flash magisk 20.1 (but forgot to reboot after flashing TWRP it was first mistake I think)
1.9. Ended with 10.3.5 (India & Global) build with stock recovery and without Magisk.
Next I tried to return to GM57BA.
Then the steps I made:
2.1. Downloading official build 10.0.7.GM57BA from oneplus support site.
2.2. Downloading Mauronofrio's TWRP twrp-3.4.0-0-guacamole-unified-Q-mauronofrio.img and twrp-3.4.0-0-guacamole-unified-installer-mauronofrio.zip
2.3. Boot OP7 into fastboot then command "fastboot boot twrp-3.4.0-0-guacamole-unified-Q-mauronofrio.img"
2.4. After phone booted into TWRP I flashed twrp-3.4.0-0-guacamole-unified-installer-mauronofrio.zip
2.5. Restart to TWRP
2.6. Flashed magisk uninstall.
2.7. Flashed 10.0.7.GM57BA
2.8. Flashed magisk 20.4
2.9. Only then I rebooted to TWRP (I think it was mistake).
2.10. Then I saw first problem - there was no lockscreen security with TWRP (unlock pattern).
2.11. Restarted to TWRP again - the same no unlock pattern screen, no access to data partition
2.12. I started to panic and restarted into system.
2.13. I ended with hard bootloop - I mean I can't even do force reset (force reboot) by pressing and holding the Power and Volume down buttons at the same time :crying:
I'm sorry for this long description but I thought it will be helpful to diagnose what I messed up.
Questions and my thoughts:
1. Did I messed up by not restarting after last magisk flash?
2. What to do now? Do I need to wait for battery discharge? Then unbrick using MSM tool?
3. Is there any chance to repair and preserve personal data? I have TWRP backup about 3 months old. Maybe after battery discharge I should go to TWRP and then sideload this backup? Maybe magisk uninstall or stock boot image flash?
Please help
Update:
After battery discharge I managed to boot into TWRP recovery (Mauronofrio's 3.4.0.0)
Then couldn't access /data
But when I switched to Slot B and reboot to recovery situation is back to normal (I guess).
I'm still in recovery scared to boot into system.
What to do now?
Click to expand...
Click to collapse
To force restart I need to use power button and both volume keys..
To keep TWRP you need to flash rom, then without restart flash TWRP again, then restart TWRP, then flash Magisk.
Likely the r reason why your system doesn't boot is because it can't decrypt your data.
Why this happens I don't know, maybe in the upgrade they changed something related to the exception and then by downgrading again it isn't able to read it anymore.
I would suggest to:
Flash the latest rom.
Flash TWRP
Reboot TWRP
If TWRP then doesn't ask for PIN or password, then I'm afraid you have lost your data. I hope you have a backup.
I'm that case format (not just clear) data -> yes
Reboot TWRP
Then flash Magisk.
Thanks for reply.
Like I wrote in update after changing slot to b I managed to run TWRP with decrypted data, made even new new backup.
I also restarted into system and it occurs I'm still 10.3.5 (India & Global) GM57AA, so everything I flashed in with build 10.0.7.GM57BA was unsuccessful.
I think I messed with changing inactive slot procedure. Noob mistake I need to read about it.
kold11 said:
Thanks for reply.
Like I wrote in update after changing slot to b I managed to run TWRP with decrypted data, made even new new backup.
I also restarted into system and it occurs I'm still 10.3.5 (India & Global) GM57AA, so everything I flashed in with build 10.0.7.GM57BA was unsuccessful.
I think I messed with changing inactive slot procedure. Noob mistake I need to read about it.
Click to expand...
Click to collapse
I would suggest do restore your device with msm unbrick tool.
1. From recovery, turn off (i noticed, that when tried to turn off from somewhere else, the device would auto reboot later in downlaod mode)
2. In windows, turn off the connection & open device manager: Get this driver http://download.windowsupdate.com/c..._fba473728483260906ba044af3c063e309e6259d.cab
3. Press volume/down + volume/up, after about 5s connect to pc
4. Your device should show up in device manager, open it and install the driver manuell from step 2 (keep device options open... if fail you need to uninstall the driver before trying again)
5. Now wait for about 40s, if your device stays in download mode, you can open & start the msm tool (leave the options in msm as they are)
6. It will take about 280s, then the device will reboot.... (its normal that it stays longer at the oneplus logo at first start)
MSM Thread: https://forum.xda-developers.com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325
I've also uploaded the 10.0.5OOS Unbrick tool on mega, because android file hosted downloads are so terrible: https://mega.nz/file/ArZFkYpS#Z_rOIwZeYN27IG6L8rOi-yfw8wXGiwvK-uWVDlsmvTI