¿do you know any procedure for root access for my teclast a11 4.1 jelly bean tablet?
i would like to root it. thanks
duendeskt said:
¿do you know any procedure for root access for my teclast a11 4.1 jelly bean tablet?
i would like to root it. thanks
Click to expand...
Click to collapse
Yes, I rooted my Teclast A11 4.1.1 tablet using the files and methods in this post:
Edit: As a new user I can't seem to post links.
I'll write it out instead.
blog dot sina dot com dot cn slash s slash blog_899fd55d01017nsb.html
Note: The site is in Chinese but google translate worked for me!
The root process was easy - the hard part was finding USB-drivers that worked with the tablet. After browsing through countless Chineese forums I got the advice to install an application called Moborobo. The software itself is quite buggy but the USB-drivers seems to work well.
On a different note - my A11 has a very annoying problem. The numbers in it's MAC address are separated by periods instead of colons. Is that the case with your tablet as well?
This makes the tablet unusable for some applications (i.e. Sonos Controller).
Good luck with your rooting!
Edit 2013-01-04: The latest update fixed my problem with the MAC address. You can get it here: http pan dot baidu dot com / share / link?shareid=147758&uk=489415757&third=0
How to get screen off during hdmi out?
I need to get my tablet screen off during hdmi out. It's kinda irritating and waste of battery with screen on during hdmi out. How to get the tablet off screen during hdmi out to tv?
My tablet (Teclast A11) with stock rom jelly bean 4.1.1 v1.11, dated 20121217.
The previous link you suggested only says N101 and teclast A10. Is A11 applicable too?
Alfred271 said:
I need to get my tablet screen off during hdmi out. It's kinda irritating and waste of battery with screen on during hdmi out. How to get the tablet off screen during hdmi out to tv?
My tablet (Teclast A11) with stock rom jelly bean 4.1.1 v1.11, dated 20121217.
The previous link you suggested only says N101 and teclast A10. Is A11 applicable too?
Click to expand...
Click to collapse
Can't help you with your screen off-problem (you may wanna look in to Tasker as it can do almost everything) but I have successfully rooted my A11 with the instructions in the first link. It's the same chipset so I gave it a go and it worked nicely. No guarantees though...
Verified successfully rooted teclast A11 dual core.
n'Anders said:
Can't help you with your screen off-problem (you may wanna look in to Tasker as it can do almost everything) but I have successfully rooted my A11 with the instructions in the first link. It's the same chipset so I gave it a go and it worked nicely. No guarantees though...
Click to expand...
Click to collapse
Step 1 : Download moborobo. Install it to your laptop/pc.
Step 2 : Download TPSparkyRoot-4.1.1Root.7z use winrar.
Step 3: Check all your resources. Inside [TPSparkyRoot-4.1.1Root] folder you should have:
1: RootExplorer.apk
2. SuperSu.apk
3. TPSparkyRoot.bat
Step 4: Switch on Teclast A11 (with more than 40% of battery) plug into microsd data cable. Wait for moborobo to detect and install tablet driver. Ignore typical windows that ask you for usb device driver. Eventually moborobo will do all the job to connect your tablet to pc.
Step 5: On tablet go to --> setting --> enable usb debugging mode. Click the check box next to it. [USB debugging mode]. Also set display to continuosly ON for 30 mins, to avoid sleep.
Step 6: Launch moborobo. Under --> Home. Click refresh to get your tablet connected.
Step 7: After tablet connected by moborobo. Go to App. Install RootExplorer.apk and SuperSu.apk
Step 8: Launch TPSparkyRoot.bat on your pc. Sit back and wait for tablet to restart.
[ you will get message : Rebooting - 1/3 : Continue once your device finishes rebooting]
Step 9: Your tablet successfully reboot. Hit enter or any key on your laptop/pc
[you will get message : Rebooting - 2/3 : Continue once your device finishes rebooting]
Your tablet rebooting second time.
Step 10: Your tablet successfully reboot. Hit enter or any key on your laptop/pc
[you will get message : uid - 0 (root) gid - 0 (root)
If the uid - 0 then continue (hit any key/enter) if not press control+c.
Suppose you will get uid-0 for both.
Finally done. You've successfully root your device. Enjoy!!
Note: You can check your root access by download "root checker" from google play store.
moborobo has no drivers/ not compatible
Alfred271 said:
Step 1 : Download moborobo. Install it to your laptop/pc.
Step 2 : Download TPSparkyRoot-4.1.1Root.7z use winrar.
Step 3: Check all your resources. Inside [TPSparkyRoot-4.1.1Root] folder you should have:
1: RootExplorer.apk
2. SuperSu.apk
3. TPSparkyRoot.bat
Step 4: Switch on Teclast A11 (with more than 40% of battery) plug into microsd data cable. Wait for moborobo to detect and install tablet driver. Ignore typical windows that ask you for usb device driver. Eventually moborobo will do all the job to connect your tablet to pc.
Step 5: On tablet go to --> setting --> enable usb debugging mode. Click the check box next to it. [USB debugging mode]. Also set display to continuosly ON for 30 mins, to avoid sleep.
Step 6: Launch moborobo. Under --> Home. Click refresh to get your tablet connected.
Step 7: After tablet connected by moborobo. Go to App. Install RootExplorer.apk and SuperSu.apk
Step 8: Launch TPSparkyRoot.bat on your pc. Sit back and wait for tablet to restart.
[ you will get message : Rebooting - 1/3 : Continue once your device finishes rebooting]
Step 9: Your tablet successfully reboot. Hit enter or any key on your laptop/pc
[you will get message : Rebooting - 2/3 : Continue once your device finishes rebooting]
Your tablet rebooting second time.
Step 10: Your tablet successfully reboot. Hit enter or any key on your laptop/pc
[you will get message : uid - 0 (root) gid - 0 (root)
If the uid - 0 then continue (hit any key/enter) if not press control+c.
Suppose you will get uid-0 for both.
Finally done. You've successfully root your device. Enjoy!!
Note: You can check your root access by download "root checker" from google play store.
Click to expand...
Click to collapse
Teclast A11 is not compatible to moborobo (any Teclast is not supported regarding the moborobo compatibility list)
I have tried the whole procedure and always it stucks at installing internal moborobo drivers. So i had no success to root Teclast A11 until now.
There is no real root procedure available which works with Teclast A11.
Has anybody real success to root this device????? Please tell us all how you really done it by yourself.
Thank you very much in advance.
ghostworm
Worked for me
ghostworm said:
Teclast A11 is not compatible to moborobo (any Teclast is not supported regarding the moborobo compatibility list)
I have tried the whole procedure and always it stucks at installing internal moborobo drivers. So i had no success to root Teclast A11 until now.
There is no real root procedure available which works with Teclast A11.
Has anybody real success to root this device????? Please tell us all how you really done it by yourself.
Thank you very much in advance.
ghostworm
Click to expand...
Click to collapse
Well I don't know what to tell you - the drivers that came with Moborobo v2.0.7.501 was the only ones that worked for me. I originally had the Android SDK drivers but they didn't work for me with the Teclast A11. When I uninstalled those drivers and then installed Moborobo I could connect to the tablet.
Btw. I have Windows 7 64bit
Other than that I followed the steps outlined in the link on my first post and my tablet is now rooted.
n'Anders said:
Well I don't know what to tell you - the drivers that came with Moborobo v2.0.7.501 was the only ones that worked for me. I originally had the Android SDK drivers but they didn't work for me with the Teclast A11. When I uninstalled those drivers and then installed Moborobo I could connect to the tablet.
Btw. I have Windows 7 64bit
Other than that I followed the steps outlined in the link on my first post and my tablet is now rooted.
Click to expand...
Click to collapse
hmm i can see that Moborobo is buggy because it allows me now to connect to the teclast over wifi only but it still does not reconize the teclast as teclast a11 over usb, and after Moborobo try to connect, it wants to install drivers but it always stucks at 99% of driver installation. Never installed any driver...
i have win8 pro 64bit
Moboro
ghostworm said:
hmm i can see that Moborobo is buggy because it allows me now to connect to the teclast but it still does not reconize the teclast as teclast a11, and after Moborobo try to connect, it wants to install MoboMarket but it was always denied by the teclast itself, even when i download it manually and try to install.
BTW is it really necessery to install MoboMarket just to root the device???
Click to expand...
Click to collapse
I didn't use any of the Mobo*-applications, the only reason I installed it was the USB-driver.
I see that Alfred271 uses Moboro to install some apps on the tablet - I didn't do that. I only ran TPSparkyRoot.bat as outlined in my first link.
This is the google translated instructions i used (Note that they tested it on a different tablet than the A11 but they share chipset so I tried it).
"1 tablet is turned on
. shut down antivirus, 360 and other similar software download address: file name: TPSparkyRoot-4.1.1Root.7z
Tablet checked USB debugging, to allow the installation of third-party software
PC will be installing a pea pod-like functionality software, connect the USB installation drive
Directly run TPSparkyRoot.bat 6.
Note: In step six. Tablet restart three times, each time you restart Ends need to unlock boot into the desktop, press any key to come back to the computer terminal to the next step.
Test platform:
The original road N101 dual engine 2
Taipower A10 dual-core"
n'Anders said:
I didn't use any of the Mobo*-applications, the only reason I installed it was the USB-driver.
I see that Alfred271 uses Moboro to install some apps on the tablet - I didn't do that. I only ran TPSparkyRoot.bat as outlined in my first link.
This is the google translated instructions i used (Note that they tested it on a different tablet than the A11 but they share chipset so I tried it).
"1 tablet is turned on
. shut down antivirus, 360 and other similar software download address: file name: TPSparkyRoot-4.1.1Root.7z
Tablet checked USB debugging, to allow the installation of third-party software
PC will be installing a pea pod-like functionality software, connect the USB installation drive
Directly run TPSparkyRoot.bat 6.
Note: In step six. Tablet restart three times, each time you restart Ends need to unlock boot into the desktop, press any key to come back to the computer terminal to the next step.
Test platform:
The original road N101 dual engine 2
Taipower A10 dual-core"
Click to expand...
Click to collapse
Ok problem solved
the main problem was Windows 8 !!!!!
I tried it on Windows 7 PC and everything worked well, thank you very much...
:good:
Hi all now i have bought another Teclast A11 with Quad-Core CPU, brand new model with much more power.
The name of the product is the same but the ID is different, before it was "D5S7" and the new is "M5A7". So can i use the same rooting files for???
Thanks in advance
Ghostworm
ghostworm said:
Hi all now i have bought another Teclast A11 with Quad-Core CPU, brand new model with much more power.
The name of the product is the same but the ID is different, before it was "D5S7" and the new is "M5A7". So can i use the same rooting files for???
Thanks in advance
Ghostworm
Click to expand...
Click to collapse
That's unlikely to work as the tablets doesn't share chipset or GPU.
Identify tablet
Hi,
I've bought a generic branded tablet, its make/model is "Hi-Level HLV-T1001W".
It is just like the Teclast A11, say, both of them are the same.
If it is not removed before you see, here is a link of product details: http://www.kare.com.tr/?cmd=UrunDetay&StokNo=28543
i think there is enough english words to understand the page, most of the descriptions are in universal english
I want to root this device. But I'm not sure which rooting procedure is appropriate for this device.
My questions:
How can I compare the firmwares of these devices, and sure they are same each other?
Can/should I use the files and procedure defined in this thread for rooting?
Thanks,
A11: http://www.teclast.org/teclast-a11-dual-core-rk3066-android-4-1-jelly-bean-10-1-inch-ips-16gb.html
atakatas said:
Hi,
I've bought a generic branded tablet, its make/model is "Hi-Level HLV-T1001W".
It is just like the Teclast A11, say, both of them are the same.
If it is not removed before you see, here is a link of product details: http://www.kare.com.tr/?cmd=UrunDetay&StokNo=28543
i think there is enough english words to understand the page, most of the descriptions are in universal english
I want to root this device. But I'm not sure which rooting procedure is appropriate for this device.
My questions:
How can I compare the firmwares of these devices, and sure they are same each other?
Can/should I use the files and procedure defined in this thread for rooting?
Thanks,
A11: http://www.teclast.org/teclast-a11-dual-core-rk3066-android-4-1-jelly-bean-10-1-inch-ips-16gb.html
Click to expand...
Click to collapse
They do look very similar (apart from your tablet having bluetooth) but it's still hard to be sure it will work.
If you're thinking about rooting using the files I linked to I would recommend making sure it has a Rockchip RK3066 chipset.
I'd imagine that the Rockchip batch tool will correctly identify the chipset (and possibly the firmware) for you.
Good luck!
n'Anders said:
They do look very similar (apart from your tablet having bluetooth) but it's still hard to be sure it will work.
If you're thinking about rooting using the files I linked to I would recommend making sure it has a Rockchip RK3066 chipset.
I'd imagine that the Rockchip batch tool will correctly identify the chipset (and possibly the firmware) for you.
Good luck!
Click to expand...
Click to collapse
Thank you for your reply.
It has a Rockchip RK3066 chipset as far as I know from the specifications.
I will give it a try after re-checking with some hardware tools.
So, what is the worst scenario if it is not suitable for my device? Brick it or something like a better case that I can recover it?
atakatas said:
Thank you for your reply.
It has a Rockchip RK3066 chipset as far as I know from the specifications.
I will give it a try after re-checking with some hardware tools.
So, what is the worst scenario if it is not suitable for my device? Brick it or something like a better case that I can recover it?
Click to expand...
Click to collapse
I have read about people that was able to restore their seemingly dead tablets through the Rockchip batch tool but I have (luckily) no experience in that department...
Thank you for your advices.
I think, "Rockchip batch tool" is the best starting point in my case. I found some tutorials on firmware update in other forums, I'll try them later. For now, I can go with it unrooted.
ROM
Hi,
Would any one recommend a good Custom ROM for my Teclast A11? I run on the stock ROM which worked fine till Sunday after which it crashed and i updated with a firmware which is not stable either.
Regards
hello guys, i downloaded the original firmware from:
http://www.teclast.com/tools/pad/putcode.html
just write down your id, it is back on the case.
How to Root and avoid bricking
For those that have an Teclast A11 Dual Core and Quad Core M5A7 I've pass my two last days to make experiments.
I've landed in a Root procedure easy to use, and I have discover how to Unbrick in case of failure of Root.
I'll hope you apreciate the guides. It's took a lot of time to write down them all.
How to Root Teclast A11 Dual Core and Quad Core with Android 4.1.1
How to Unbrick Teclast A11 Quad Core M5A7
How to Update firmware to Android 4.2.2
Sorry for my English, I'm Italian.
Have a nice day.
Dear XDA,
I have had a Tudou 91 D1 for over a year, and i tried every rooting method. (one click root, srs root, etc) I tried looking for roms but there is little on google about this phone, and nothing on xda. It is a good phone, very happy with it, but no roms. Is there any rom that could be tweaked to work on my phone? I checked about rom porting and creating a new rom via kitchen but all those require a rom for my phone, and a rom i want to change. The problem is i got nothing for my phone.
ALPS Tudou91 D1
quadrant standard review
4.2.1 Jellybean
ID: JOP40D
OS Version:3.4.5
dalvik: 1.6.0
Model:Tudou91 D1
Product/board: ratech89_we_rlk_jb2
ARMv7 Processor rev 2 (v7l)
1.2ghz
4 cores
architecture 7
bogoMIPS:2439.94
MT6589
revision 2
serial: bunch of zeros
total memory:995912 kb
540x960
5'3 in
240 dpi
51.02 fps or refresh rate
PowerVR SGX 544MP
OpenGL ES 2.0
bootloader: unknown (although when i boot into recovery "volume up + power" it shows no command, hold volume down + power, and i get into "Android system recovery <3e>") and its yellow, if that helps lol
http://www.cheapunlockphone.com/?p=1688 <--the phone
if it helps, i extracted launcher apk and it had something like s3 launcher.
Thank you very much!
First off, try to see if the manufacturer provides existing firmware on their website. It would be ideal if you can get that. If there is one, then that would be your backup.
Now the next step towards rooting is to either use z4root or try to inject the root into the stock firmware and then flash it yourself. You may also use this guide to enhance it further.
Now supposing you do not find a Stock firmware by the manufacturer, there is a way to backup the current stock firmware on the phone. At least for most of the phones. Here's a nice Guide on how to do so. I am aware its for a different phone. But it will give you ideas and pointers.
FYI on SRS page they say your phone is supported. So Try These steps
1. Use USBDEVIEW to uninstall any usb devices that look like they may be your phone.
2. Download the Universal Drivers from here http://hexamob.com/drivers-smartphone-tablet/tutorial-universal-adb-driver-koush/
3. Once you have your phone installed with the proper drivers and can access ADB via cmd (if you need adb tool search the forms) download the srsroot and run it.
Like i said in the first line Your Phone is Supported by SRS root. Once you have root back up your phone. Back up your WHOLE phone not just system and data. Everything. Once you have a good backup. start playing. If you just want to use some simple mods install xposed. If you want a custom AOSP rom u will prob have to build it your self.
Have fun!
I will try! i think i messed up somewhere with adb, when i tried srs root. does srs root need adb drivers? if so, then that was my problem.
messed up
Perseus71 said:
First off, try to see if the manufacturer provides existing firmware on their website. It would be ideal if you can get that. If there is one, then that would be your backup.
Now the next step towards rooting is to either use z4root or try to inject the root into the stock firmware and then flash it yourself. You may also use this guide to enhance it further.
Now supposing you do not find a Stock firmware by the manufacturer, there is a way to backup the current stock firmware on the phone. At least for most of the phones. Here's a nice Guide on how to do so. I am aware its for a different phone. But it will give you ideas and pointers.
Click to expand...
Click to collapse
I just tried this method, followed your steps, and srs root results:
10:11:58 AM [+] Testing exploit: root4b (please wait..)
10:12:05 AM [+] Device Reboot #1 (Wait till it's started)
10:13:27 AM [+] Device Reboot #2 (Wait till it's started)
10:14:41 AM [+] Remounting /system Filesystem as R/W..
10:14:41 AM [+] Installing SU Binary...
10:14:41 AM [+] Installing SuperUser APK...
10:14:42 AM [+] Remounting /system Filesystem as R/O..
10:14:48 AM [+] Rooting Complete !
I cant find the superuser app, and i checked with root checker pro if i had root, and it says that the device is not rooted.
root checker pro:
superuser application- is not installed!
SuperSU application- is not installed.
analysis: Setuid attribute present and root user ownership present. Root access is correctly configured for this file! Executing this file can grant root access!
I found the file in system/bin/su but i dont know how to execute it.
also to top things up, when i tried srs root option for gesture lock, it said this
10:33:43 AM - Starting ADB Server..
10:33:48 AM - Manufacturer: alps
10:33:48 AM - Model: Tudou91 D1
10:33:48 AM - Android Version: 4.2.1
10:33:48 AM - Build ID: Tudou91_D1_V1.0
10:33:48 AM - Board ID: ratech89_we_rlk_jb2
10:33:48 AM - Chipset Platform:
Device is not rooted, To use this function you need to root it first...
its messed up
Have you tried the steps I had mentioned ?
Hello,
After looking at your thread we have decided to close it. XDA assist is here to help users learn their way around XDA. It is not here to fix issues for users. Please have a look at the goals of the forum:
The mission of XDA Assist is to provide basic help to those who have tried searching but can't find what they are looking for and need assistance. This is not a "helpdesk" providing technical assistance but more to point you in the correct direction with your problem. Perhaps you can't find posts on how to root your phone, install custom recovery or maybe you have questions about how to navigate and use features on the site.
Click to expand...
Click to collapse
As there is no dedicated forum available for your device, the best we can offer is to create a thread in: Upgrading, Modifying and Unlocking section in the general forum. Other users on XDA may be able to help you there. If you can provide as much detail on your device as possible and the steps you have taken so far it will help.
We do hope you can get your issue resolved.
Many thanks,
Ghost
Forum Moderator - XDA Assist forum.
Hi all
Thanks for the job done on this forum.
I have a 2016 honda HRV with android radio locked
I would like to root it to install my own apk (not possible for the moment) they use an encrypted HAP as apk and that' the only installation possible (from Hondaappcenter)
the unit ru android 4.0.4
the unit have a chipset Nvidia Tegra T30AGS-Q-A3
more info and pictures on this thread http :// forum.xda-developers.com/android/help/heard-2016-honda-pilot-android-based-t3141346/page9
what i could do for the moment :
Open the unit
discover an hidden usb port
connect to pc via that port
install adb + android studio (sdk)
I need to install specific driver with this http :// forum.xda-developers.com /showthread.php?t=1119507
Active USB debug mode (don't stay crossed on each reboot you have to activeted again)
Now i can connect with adb + pc
As you can not use an apk, i try to root it (via windows 7 32 bits) via SRS one click 5.1 But no luck (failed)
retry with oneclick Android one toolkit 1.2.1 but stuck on loading recovery
Anyone have a good idea ?
Have a nice day
Fred
nanddroid said:
Hi all
Thanks for the job done on this forum.
I have a 2016 honda HRV with android radio locked
I would like to root it to install my own apk (not possible for the moment) they use an encrypted HAP as apk and that' the only installation possible (from Hondaappcenter)
the unit ru android 4.0.4
the unit have a chipset Nvidia Tegra T30AGS-Q-A3
more info and pictures on this thread http :// forum.xda-developers.com/android/help/heard-2016-honda-pilot-android-based-t3141346/page9
what i could do for the moment :
Open the unit
discover an hidden usb port
connect to pc via that port
install adb + android studio (sdk)
I need to install specific driver with this http :// forum.xda-developers.com /showthread.php?t=1119507
Active USB debug mode (don't stay crossed on each reboot you have to activeted again)
Now i can connect with adb + pc
As you can not use an apk, i try to root it (via windows 7 32 bits) via SRS one click 5.1 But no luck (failed)
retry with oneclick Android one toolkit 1.2.1 but stuck on loading recovery
Anyone have a good idea ?
Have a nice day
Fred
Click to expand...
Click to collapse
Hi Fred,
The purpose of XDA Assist is to help newbies navigate the site.
It looks like you found a good thread for support here: http://forum.xda-developers.com/android/help/heard-2016-honda-pilot-android-based-t3141346/page9
For discussion about android head units you can also check out this section: Android auto.
Good luck
Art Vanderlay
XDA Assist
the miflash unlock too does not recognize the phone ( and yes I have done all other steps of creating an account, tying a phone number,phone is logged in with the miaccount, updating it to 6.5.224.4 ,putting phone to fastboot enabling developer options)
fastboot devices also does not turn up with anything because I do not have any drivers installed ( nowhere in website it says i need to manually find drivers but i am assuming that is the issue because in device manager it says no drivers installed )
how do i install drivers ? where do I find them ? after googling a little I couldn't find anything official in qualcomm website or poco xiaomi website my old phone was an intel one and installing drivers was as easy as going to the official intel website and downloading them
if someone can point me in the right direction i'd be glad
Unlock bootloader first. It takes one week (168 hours) to be accepted by xiaomi.
Thank you for your reply but have you read anything i wrote
Try to check this Guide.
hellokelly said:
the miflash unlock too does not recognize the phone ( and yes I have done all other steps of creating an account, tying a phone number,phone is logged in with the miaccount, updating it to 6.5.224.4 ,putting phone to fastboot enabling developer options)
fastboot devices also does not turn up with anything because I do not have any drivers installed ( nowhere in website it says i need to manually find drivers but i am assuming that is the issue because in device manager it says no drivers installed )
how do i install drivers ? where do I find them ? after googling a little I couldn't find anything official in qualcomm website or poco xiaomi website my old phone was an intel one and installing drivers was as easy as going to the official intel website and downloading them
if someone can point me in the right direction i'd be glad
Click to expand...
Click to collapse
It sounds like you need the adb drivers installed. Have a look here and see if that helps.
Xiaomi Poco X3 ADB Driver, PC Software & User Manual Download
Here, we provide free Xiaomi Poco X3 ADB Driver, PC Software & User Manual Download with single click on the download link below.
www.xiaomidriversdownload.com
That website failed to give me the drivers nothing happens when I click download / not to mention that it looks like one of those auto-generated spam websites to trick search engines to get clicks and push dubious phishing software and ads to unsuspecting users I think you should remove that link.
but I managed to fix my issue quickly after searching a bit more and looking at a youtube video where a guy came across the same problem I experienced
Can a mod here and or someone in lineageOS website change the
tutorials or guides or add additional info ?
DOWNLOAD THE MI UNLOCK TOOL is a bit misleading , because the newest version of the miunlock tool 6.5 and the version you download 5.5 etc.. when you click on download
https://en.miui.com/unlock/download_en.html on this webpage
DOES NOT CONTAIN ANY DRIVERS you have to find the older versions by clicking FAQ and going here :
https://c.mi.com/thread-2262302-1-0.html
and download 4.5 and lower because the driver_install.exe file
DOES NOT EXIST in the newer versions of the tool which creates the problem I am having.
Xiamoitool V2
GitHub - francescotescari/XiaoMiToolV2: XiaomiTool V2 - Modding tool for xiaomi devices
XiaomiTool V2 - Modding tool for xiaomi devices. Contribute to francescotescari/XiaoMiToolV2 development by creating an account on GitHub.
github.com
at this github page also supposed to work and install drivers but I have not used it.
Hi there,
i got an SuitePad 8.
There is no "normal" ROM in TWRP or something else i should know.
So my question is how to root the Tablet?
Here are the device specs:
rockchip SuitePad_8 Specification
Technical Specification of rockchip SuitePad_8, auto-generated by SpecDevice application. Actual hardware list.
specdevice.com
Update:
From Specs it should be ALLNET Touch Display Tablet
1. Root.
If Kingroot doesn't help, nothing will help.
2. if you do root.
Ask for twrp.