Please help me! My pnone is stucked in the warning message "your phone's bootloader has unlocked andd can'be trusted" and try to boot but notworking at all. the logo appears for a second and phone try to boot again and again. I tryed all button combinations but noyhing work. tryed to connect to pc but not recognized at all, adb not detect the device, just the warning page is visible on phone and nothing else.
Re-flash phone's Stock ROM.
I can't connect to pc, I can't reboot the phone, can't enter in erecovery or fastboot or adb, only that message page can see and can not do anything. I thin i'm need some program to recognize my phone. no idea.
Related
So I got a Xperia E3 dead here. When I turn it on the LED turns red and it gets stuck at Sony Xperia logo and to turn it off I have to use hard reset button. Then I tried to repair through PC Companion but when it asks to plug the phone holding volume down (flashmode) the only thing that happens is the led turning green, but PC Companion won't recognize it, therefore I can't repair the phone through PC Companion. Then I tried entering fastboot mode holding volume up. It kinda works, the blue led is there, the computer recognizes the phone, and it's there on "fastboot devices". But any command I try like "fastboot erase userdata" or "fastboot flash boot boot.img" doesn't work, it gives an error saying "command not allowed". I gooled it and it seems I need to unlock bootloader to use those commands. So I downloaded Flashtool, but to unlock bootloader I need to enter Flashmode and... flashmode is not working.
I can't boot the phone, I can't enter flashmode and even though fastboot seems to work, the screen is completely black (I don't know if that's how it's supposed to be).
I've been googling this all morning and nothing works, what should I do?
rafaelgirotti said:
So I got a Xperia E3 dead here. When I turn it on the LED turns red and it gets stuck at Sony Xperia logo and to turn it off I have to use hard reset button. Then I tried to repair through PC Companion but when it asks to plug the phone holding volume down (flashmode) the only thing that happens is the led turning green, but PC Companion won't recognize it, therefore I can't repair the phone through PC Companion. Then I tried entering fastboot mode holding volume up. It kinda works, the blue led is there, the computer recognizes the phone, and it's there on "fastboot devices". But any command I try like "fastboot erase userdata" or "fastboot flash boot boot.img" doesn't work, it gives an error saying "command not allowed". I gooled it and it seems I need to unlock bootloader to use those commands. So I downloaded Flashtool, but to unlock bootloader I need to enter Flashmode and... flashmode is not working.
I can't boot the phone, I can't enter flashmode and even though fastboot seems to work, the screen is completely black (I don't know if that's how it's supposed to be).
I've been googling this all morning and nothing works, what should I do?
Click to expand...
Click to collapse
Have you checked that PC does not recognize anything in flash mode? Try to check if Device Management (devmgmt.msc) make a reload when you plug your phone with Vol Down.
If not you can try to unlock the bootloader from the official site, but you can not check if Unlock is allowed so be careful. You can check your IMEI on the back of your phone, on the battery tape.
PC doesn't recognize anything in flashmode.
I tried this from the official site but there's a problem, the IMEI on battery tape is a bit illegible. So I tried a few combinations and got some unlock keys, all of them gave this error in fastboot "FAILED (remote: Command did not succeed)"
Reply
I am facing same issues even at shop they can't able to recover
rafaelgirotti said:
So I got a Xperia E3 dead here. When I turn it on the LED turns red and it gets stuck at Sony Xperia logo and to turn it off I have to use hard reset button. Then I tried to repair through PC Companion but when it asks to plug the phone holding volume down (flashmode) the only thing that happens is the led turning green, but PC Companion won't recognize it, therefore I can't repair the phone through PC Companion. Then I tried entering fastboot mode holding volume up. It kinda works, the blue led is there, the computer recognizes the phone, and it's there on "fastboot devices". But any command I try like "fastboot erase userdata" or "fastboot flash boot boot.img" doesn't work, it gives an error saying "command not allowed". I gooled it and it seems I need to unlock bootloader to use those commands. So I downloaded Flashtool, but to unlock bootloader I need to enter Flashmode and... flashmode is not working.
I can't boot the phone, I can't enter flashmode and even though fastboot seems to work, the screen is completely black (I don't know if that's how it's supposed to be).
I've been googling this all morning and nothing works, what should I do?
Click to expand...
Click to collapse
What you did so you can't turn it on? It couldn't be from nothing.
The phone isn't mine. My friend said the phone was asking to update but he didn't update. Next day he wakes up and the phone is dead. He's not an advanced user so he never messed around with it.
Hello.
I am Finnish, so I try to tell my problem with correct english.
I have a Huawei P9 Mini Lite phone with Android 7, stock ROM. I unlocked the bootloader. I tried to install custom recovery, TWRP, but it failed, must have been wrong version, for other P9 model. I used Windows software just for for Huawei phones, that you can use to unlock, relock bootloder, root, and many stuff (I cannot remember the name of that software, it works in command prompt window). Situation was kind of messy, but after unlocking, I was able to boot phone to Android OS, only entering eRecovery first, and there press the "reboot" option. So I thought if I relock the bootloader, it maybe helps. After relocking, I rebooted my phone, and I got notification, that there is some problem with file system, and I must do factory reset. It offered me that option right away, so I clicked factory reset. After that, phone went into boot loop state, and also there is a warning screen, about that phone cannot be trusted, because of bootloader is unlocked-relocked. Cannot remember clearly, because the warning screen appears only for few seconds. I was able to press power, vol up/down buttons, that are mentioned in warning screen to enter recovery or continue etc., but it doesn´t help. Huawei logo appears, phone vibrates, and then it starts again... I cannot enter eRecovery anymore. I can enter to normal stock recovery only when I connect USB cable to PC, and press power and vol down, but there is no options to anything. Only notification, that I must connect phone to computer with USB cable, and I did that already. But computer doesn´t recognize my phone, so I cannot do nothing by using computer to try factory reset or something else. In a simple way, I have drivers on my PC for USB, and Huawei software too, but I cannot connect phone to PC. Interesting thing is, that Huawei software on my PC recognizes that there is my phone, when I use USB cable, but there is no connection between phone and PC. So how I can do anything to my phone, when I cannot use my PC to work with my phone? Battery is not removable, and I also let my battery to go empty, and when I connected phone to charger after that, and later tried to turn it on, boot loop started again.
[WANTED!!!] TWRP port for Huawei SLA-L02
Hi and welcome to this forum.
I apologize for the late reply. In the meantime, did you resolve the issue?
Is your device a Huawei SLA-L02?
If you still need help for the above-mentioned smartphone, let me know.
Thanks and greetings
can you please help me I need help because this is happening to me and can you please respond fast
Simon Šircelj said:
can you please help me I need help because this is happening to me and can you please respond fast
Click to expand...
Click to collapse
You can follow this guide.
Make sure that the build number ends in an even number (if your phone is a dual-sim model). For example, SLA-L22C432B150
In order to recover Android properly, it's necessary to discover which build number is installed now on your phone. So please, turn off your phone. Plug your phone to a computer by a usb cable, then hold down simultaneously the volume down button and the power button, so that the FASTBOOT&RESCUE MODE can start on your phone. Then, on Windows, run a command prompt as administrator and move to the directory where there are fastboot and adb.
Now, type and enter the following command:
Code:
fastboot oem get-build-number
Then, post the returned result, thanks.
Hello guys, right now i'm in big troubles with my FRD-L09C432. I tried to flash the rollback package (wich was working yesterday) but this time after the flashing process phone won't boot, i tried to enter recovery mode but i couldn't. Then i entered in fastboot mode and unlocked bootloader in order to reset the phone. I entered yes on the screen and the phone tried to reboot but now it is stuck on "your phone is unlocked..." and at the bottom: "your phone is booting now". But nothing happen and right now i cannot access recovery, or fastboot or even dload nothing works, i disconnected the battery and started the phone again but nothing... When i try to rebbot it in fastboot, recovery or dload mode it just vibrates twice and show the same screen with "your phone is booting now"
I'm really desperate i have never had a hopeless situation like that, i need your help, thanks a lot for any suggestion or idea that i could try.
:crying:
Up...
Rayan19997 said:
Hello guys, right now i'm in big troubles with my FRD-L09C432. I tried to flash the rollback package (wich was working yesterday) but this time after the flashing process phone won't boot, i tried to enter recovery mode but i couldn't. Then i entered in fastboot mode and unlocked bootloader in order to reset the phone. I entered yes on the screen and the phone tried to reboot but now it is stuck on "your phone is unlocked..." and at the bottom: "your phone is booting now". But nothing happen and right now i cannot access recovery, or fastboot or even dload nothing works, i disconnected the battery and started the phone again but nothing... When i try to rebbot it in fastboot, recovery or dload mode it just vibrates twice and show the same screen with "your phone is booting now"
I'm really desperate i have never had a hopeless situation like that, i need your help, thanks a lot for any suggestion or idea that i could try.
:crying:
Click to expand...
Click to collapse
Here is a link to my own experience of a similar situation.
https://forum.xda-developers.com/honor-8/help/reverting-to-stock-t3685909
And here is another link that might help.
https://forum.xda-developers.com/honor-8/help/honor-8-hard-brick-t3709598
I hope these will help.
srgrusso said:
Here is a link to my own experience of a similar situation.
https://forum.xda-developers.com/honor-8/help/reverting-to-stock-t3685909
And here is another link that might help.
https://forum.xda-developers.com/honor-8/help/honor-8-hard-brick-t3709598
I hope these will help.
Click to expand...
Click to collapse
Thanks dude i'll read that for sure
Unfortunately i have no access to fastboot that's why even DC Phoenix cannot do anything...
fastboot ... conect phone to PC. If the phone its on or off dosend matter.
After conecting to PC hold volume - and power buton (first volume- !) .... and wait a while ... it may reboot severel times. befor enter fastboot.
After enter fastboot try this https://forum.xda-developers.com/honor-8/help/honor-8-hard-bricket-how-to-restore-t3739551
I pray to access this damn fastboot mode dude but i've tried everything and i cannot get into it even when i disconnect/reconnect the battery
My opinion is that the phone tries to reboot in order to reset itself but smthg prevent it from rebooting correctly, a friend told me the boot is damaged/corrupted
Go to one of those high street repair shops. They fixed mine for 80 pounds.
The tech tried with his Huawei flashing box but he couldn't detect the phone...
Did your device got unbriked?
No i bought one with the screen broken and i swapped thé motherboards, but the other is still bricked
Heya folks,
I have just attempted my first time flashing TWRP on my TP-Link Neffos X-1 following this guide: https://rootmygalaxy.net/twrp-root-...nd_Install_TWRP_Recovery_On_TP-Link_Neffos_X1.
Its looking kinda grim. It starts with the orange state Message and that the device will boot in 5 seconds, however after that it starts with an infinite bootloop. I also cannot access the Recovery (vol up + power), for it simply doesnt work anymore after the guide. When I plug it into my pc, it will automatically start with the bootloop (I can shut the phone off with vol down + power).
Attempting to get into fastboot mode over ADB (adb reboot bootloader), returns with the message error: device '(null)' not found. I think that is due to it not being recognized in the device manager(it doesnt show my phone anymore but unknown device). I tried to install the phone driver for the uknown device, however that keeps failing. I think its due to the phone permanently connecting and reconnecting to the pc.
So I'm wondering of what to do. I guess the biggest issue is that the drivers are not recognized, but as long as the phone keeps on restarting every couple of seconds i doubt i can properly install the driver. You guys got any ideas?
My guess is you haven't installed on Windows PC the appropriate Android USB Driver matching the device
I mean the appropriate USB driver had to be there for me to flash it with the TWRP in the first place, right?
Think I clearly said that the additionally required USB-driver has to be installed on Windows PC.
I have this one installed https://rootmydevice.com/download-neffos-usb-drivers/, is this the additionally required usb driver?
So far, despite what driver I pick for the device, it shows the code 10, device couldnt be started - probably because it never gets past the starting screen but keeps rebooting
slayingduck said:
Heya folks,
I have just attempted my first time flashing TWRP on my TP-Link Neffos X-1 following this guide: https://rootmygalaxy.net/twrp-root-...nd_Install_TWRP_Recovery_On_TP-Link_Neffos_X1.
Its looking kinda grim. It starts with the orange state Message and that the device will boot in 5 seconds, however after that it starts with an infinite bootloop. I also cannot access the Recovery (vol up + power), for it simply doesnt work anymore after the guide. When I plug it into my pc, it will automatically start with the bootloop (I can shut the phone off with vol down + power).
Attempting to get into fastboot mode over ADB (adb reboot bootloader), returns with the message error: device '(null)' not found. I think that is due to it not being recognized in the device manager(it doesnt show my phone anymore but unknown device). I tried to install the phone driver for the uknown device, however that keeps failing. I think its due to the phone permanently connecting and reconnecting to the pc.
So I'm wondering of what to do. I guess the biggest issue is that the drivers are not recognized, but as long as the phone keeps on restarting every couple of seconds i doubt i can properly install the driver. You guys got any ideas?
Click to expand...
Click to collapse
Try this TWRP file: TWRP_3.2.3_NeffosX1_TP902A_by_kiruha_21.img
The thing is, I cannot flash anything due to my phone constantly rebooting while inserted in the pc usb-slot. Neither ADB nor my device manager recognize the device and as mentioned before, I cannot install any drivers
slayingduck said:
The thing is, I cannot flash anything due to my phone constantly rebooting while inserted in the pc usb-slot. Neither ADB nor my device manager recognize the device and as mentioned before, I cannot install any drivers
Click to expand...
Click to collapse
Some MTK devices has this: Press both VOL+ & Power buttons. Only remove 2 buttons when you see Bootloader mode (recovery; fastboot; reboot system) or directly in the Recovery mode. Now you can use fastboot.
With the SPFT you can use same tip above. In the SPFT choose DOWNLOAD and plug USB device. Process to flash stock ROM or stock recovery.img & boot.img start.
If not start pugging USB: choose DOWNLOAD - press VOL- and plug USV device. You can try with buttons like only VOL- or VOL+ or combo buttons VOL+&VOL- or VOL-&VOL+ or other button combination.
You can try FIRMWARE UPGRADE too.
That's depend about LOCKED or Unlocked bootloader process that you made before actions!
If you unlocked bootloader so only need patience. If not so that's no good.
My phone is stuck on this screen and keeps restarting by their own.
I even tried to press power button but the bootloader warning is still can't removed.
I till tried to press the V-/PB and V+/PB and V+-/PB but it didn't work.
When I tried to connect my phone to my PC but my PC can't detect my phone...
I was trying to install the TWRP recovery image to install the TWRP recovery in Odin.
Can you help me by not, to waste my time and don't tell me to head my phone to the nearest service center.
So I can use my phone for generally.
Have you tried holding V-/PB then when the screen goes black connect it to a charger and hold V-+/PB