[ROM][UNOFFICIAL][j6lte][10] LineageOS 17.1 - Samsung Galaxy J6 ROMs, Kernels, Recoveries, & Oth

[ROM][UNOFFICIAL][j6lte][10] LineageOS 17.1 - Samsung Galaxy J6 ROMs, Kernels, Recoveries, & Oth

Big, big, big work. I install LineageOS 17.1 no problem
Ole your balls

Can't delete apps, package installer keeps crashing, can't finish the setup, ui keeps crashing, whatsapp has stretched back camera, other apps like duo and telegram are fine tho

xL0r said:
Can't delete apps, package installer keeps crashing, can't finish the setup, ui keeps crashing, whatsapp has stretched back camera, other apps like duo and telegram are fine tho
Click to expand...
Click to collapse
have you followed the instructions? have you performed a clean flash?

FraSharp said:
have you followed the instructions? have you performed a clean flash?
Click to expand...
Click to collapse
Yes sir, everything was as mentioned, a clean installation

Calling Problem with earphone. both side not enable to listen voice after 4/5 seconds. I tried magisk module and also edit build prop, but still doesn’t work.

This is so far best rom i've installed on my j600f.
No issue at all.
Amazing battery and performance.
Thanks. Great work.

Mouazam said:
This is so far best rom i've installed on my j600f.
No issue at all.
Amazing battery and performance.
Thanks. Great work.
Click to expand...
Click to collapse
Tried clean install using TWRP 3.3.1 only problem is pressing power button won't wake it. Goes into sleep mode forever. Power button press not working.

[email protected] said:
Tried clean install using TWRP 3.3.1 only problem is pressing power button won't wake it. Goes into sleep mode forever. Power button press not working.
Click to expand...
Click to collapse
you changed the kernel? try to clean flash using orangefox instead of twrp

[email protected] said:
Tried clean install using TWRP 3.3.1 only problem is pressing power button won't wake it. Goes into sleep mode forever. Power button press not working.
Click to expand...
Click to collapse
1. install orangefox recovery latest
2. flash repartition script (format data and wipe all other partitions)
3. install rom zip
4. install gapps (optional)
5. install magisk (optional)
the included kernel is best btw, no need to change that

for the j7 prime there is no ????

Padrino25 said:
for the j7 prime there is no ????
Click to expand...
Click to collapse
nope

Nice rom, but there is one critical bug. The phone function does not work well, and I do not always hear the interlocutor, and he does not always hear me. Tried installing other apps for the phone, but this is no help me. My model: J600F

When my phone lock by being idle or just bc I hit the power botton I cant get it back unless I tap volume- and power key. I am also experiencing transparent picture in picture for vanced youtube. I am on a J600g

there is no fm radio on this rom.
is there any solution?

Volte is not supporting....

FraSharp said:
View attachment 5220455
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
Make sure you're using OrangeFox Recovery
Wipe: Cache, Dalvik / ART Cache, System, Vendor, Data, Internal Storage
Flash "lineage-17.1-20210213-UNOFFICIAL-j6lte.zip"
Reboot to system
Optional: Flash Magisk (any version)
Optional: Flash GApps - ARM64, micro is recommended
NOTE: SYSTEM, VENDOR AND KERNEL ARE INCLUDED WITHIN THE ZIP
Downloads:
https://drive.google.com/file/d/1mbteqQuPRYLqo-HjTs2knLGjACMuTGAs/view?usp=sharing
Known issues:
WiFi Direct
Bluetooth calls (needs to be tested)
LiveDisplay
Reporting Bugs:
Make sure the bug you want to report isn't already known
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Contributors:
@Astrako - Device Tree
Source Code:
Kernel: https://github.com/samsungexynos7870/android_kernel_samsung_exynos7870/tree/aosp
Device: https://github.com/samsungexynos7870/android_device_samsung_j6lte/tree/lineage-17.1
ROM OS Version: Android 10
ROM Kernel: 3.18.140
Version Information
Status: Stable
Created 2021-02-13
Last Updated 2021-02-13
Click to expand...
Click to collapse
the phone does not turn on despite having followed everything to the letter.
my model is the j6ltedx

Play Store NO

Do I need to repartition for this? Read about a repartitioning script somewhere? Everytime I install GAPPs (ARM64 Micro), it doesnt boot
edit: worked with pico gapps, but only 18gb of storafge

Slavikk_ said:
Nice rom, but there is one critical bug. The phone function does not work well, and I do not always hear the interlocutor, and he does not always hear me. Tried installing other apps for the phone, but this is no help me. My model: J600F
Click to expand...
Click to collapse
happens to me
solution?
Slavikk_ said:
Nice rom, but there is one critical bug. The phone function does not work well, and I do not always hear the interlocutor, and he does not always hear me. Tried installing other apps for the phone, but this is no help me. My model: J600F
Click to expand...
Click to collapse
solution?
@edit1
Unfortunately many bugs

Related

[ROM][BETA][10.x] LineageOS 17.1 [clover / MiPad4/ MiPad4 Plus]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
This Rom works on MI PAD 4 or MI PAD 4 PLUS
Instructions
1. Download ROM, Gapps, TWRP recovery.
2. Flash TWRP Recovery via fastboot (fastboot flash recovery pathTo/recovery.img)
3. Boot into Recovery
4. Format System, Data and wipe Dalvik, Cache from recovery (Wipe Option).
5. Flash Lineage zip.
6. Flash Gapps zip.
7. Reboot.
(Optional)
6.2 Root: Download Magisk & flash Magisk zip via Recovery
Downloads :
Recommand TWRP
TWRP with ability to decrypt /data/ partition (origin)
Clover Builds (by S-trace)
lineage-17.1-20200512-UNOFFICIAL-clover.zip - Current release.
Gapps (use open_gapps-arm64-10.0 versions only)
Known Issues:
* nothing
Notes:
OTA:
OTA support has been added in lineage-17.1-20200406-UNOFFICIAL-clover build.
Any test reports are greatly appreciated.
OTA+Magisk+encryption:
If your device is encrypted and you are using Magisk - please use TWRP with encryption support (above) and install downloaded by OTA updater ZIP manually after reboot into TWRP, or reflash Magisk ZIP after update (reboot to TWRP, decrypt /data/ and then flash Magisk).
SafetyNet:
To pass SafetyNet ctsProfile enable Magisk Hide in Magisk Manager and wipe Play Store data.
Legal questions about the state of this project:
rcstar6696, the original developer of this ROM have abandoned it for a while after the build 20200106 , and I (S-trace) built a new build of this ROM, and then I fixed an issue with WLAN Tethering offload on encrypted devices (rcstar6696 don't support the device encryption, but don't forbid the encryption completely), and then I got the invite from rcstar6696 to the xiaomi-sdm660 team to maintain the LineageOS for the clover (rcstar6696 supports several Xiaomi SDM660 devices, not only clover). Then I got the piracy attack from LR-user but rcstar6696 responded to this attack and confirmed me as the new LineageOS maintainer for clover because he simply not have the time to maintain 3 ROMs and transferred this project to me.
I'm too don't have much time to develop the LineageOS for clover, so I just merge the cr-8.0 branch to lineage-17.1 branch and build the ROM, install it to my clover tablet (LTE-4GB-8" model) and quickly test it, and (if no problems were detected) upload it and post it here and release the ROM as an OTA update. So, please also thank rcstar6696 for this ROM, because I don't develop it very much but just maintain it using rcstar6696 original development for cr-8.0 ROM.
Changes (full changelog):
May Security Patch
Switched to cr-8.0-eas common vendor tree
Android updated to 10.0.0_r35
Kernel updated to 4.4.223
Blobs updated to LA.UM.8.2.r1-06500-sdm660.0
Misc LineageOS fixes and updates
Reporting Bugs
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
XDA:DevDB Information
[ROM][BETA][10.x] LineageOS 17.1 [clover / MiPad4/ MiPad4 Plus], ROM for the Xiaomi Mi Pad 4
Contributors
rcstar6696, S-trace
Source Code: https://github.com/xiaomi-sdm660
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Based On: Lineage
Version Information
Status: Beta
Current Beta Version: 17.1-20200512
Beta Release Date: 2020-05-12
Created 2019-10-23
Last Updated 2020-07-20

#ISSUE #Persist
People who is on Android 10 or testing 10 are willing to go back to Pie will get their persist folder deleted causing(wifi ,hotspot , no signal issues)...so backup your persist from TWRP , revert to pie then flash the backup
Thanks

Thanks for your effort. Boots fine on the regular Mi PAD 4 64GB. Other than that, would you mind specifying the TWRP version in the OP?

Alex Kane said:
Thanks for your effort. Boots fine on the regular Mi PAD 4 64GB. Other than that, would you mind specifying the TWRP version in the OP?
Click to expand...
Click to collapse
done its 3.3.1

It looks really good.
I installed it dirty over LineageOS 16 on my MiPad 4 Plus LTE.
No FCs, youtube working, sound working, wlan and lte working.
Animations were a bit laggy in playstore when i started updating apps.
Now installing magisk - not booting yet.

Is there an option for rounded corners? Can't find it anywhere...

McFlypants said:
It looks really good.
I installed it dirty over LineageOS 16 on my MiPad 4 Plus LTE.
No FCs, youtube working, sound working, wlan and lte working.
Animations were a bit laggy in playstore when i started updating apps.
Now installing magisk - not booting yet.
Click to expand...
Click to collapse
Reflashed it clean: everything important works but i can't use riru_edxposed. It stays at the MI-Bootlogo for so long, i didn't want to wait anymore.

Is this fully stable?

great work!

Hello,
the rom works perfectly and pretty stable so far.
Thanks for your time and work!
I just can't get Google Photos to sync, but I assume it's a gapps issue. Everything else is running fine.
Would you mind adding ethernet usb drivers to the kernel?
The device recognises the USB-to-ethernet adapter and shows a dummy0 interface instead of eth0 when running ifconfig.
There was ethernet support on the February Lineageos 16 build found on 4pda.
I'd be really happy to have that feature, but I'm already thankful for being able to run Android 10.

Hello!
Is it an official build?

Finally thanks @rcstar6696 will flash asap
EDIT: Had initially shutdown after Mi logo. Not sure if that was becuase I flashed Magisk 19.3 or because I didn't flashed disable_dm-verity_forceencrypt_10.20.2019
anyway, after flashing magisk v20.0 and disable_dm-verity_forceencrypt_10.20.2019 now it's all good
even magnetic cover works, close and open

banesi said:
Finally thanks @rcstar6696 will flash asap
EDIT: Had initially shutdown after Mi logo. Not sure if that was becuase I flashed Magisk 19.3 or because I didn't flashed disable_dm-verity_forceencrypt_10.20.2019
anyway, after flashing magisk v20.0 and disable_dm-verity_forceencrypt_10.20.2019 now it's all good
even magnetic cover works, close and open
Click to expand...
Click to collapse
Only above magisk 19.5 will work. All lower are not working

OK, good to know, does usb storage works for anyone?

banesi said:
OK, good to know, does usb storage works for anyone?
Click to expand...
Click to collapse
Yeah, works.

Navigation bar can't hide and battery saver can't turn on

mELIANTE said:
Is there an option for rounded corners? Can't find it anywhere...
Click to expand...
Click to collapse
Dev please update round corner.

What's wrong with it, looks good to me?

Encryption doesn't seem to work, does it?

Wow... no complaints at the moment... I love that gesture navigation out of the box!

[ROM][OFFICIAL][mermaid][10] LineageOS 17.1

oh btw you might want to use this TWRP for flashing my builds.

Just bootlop
Great performance and smoothness.

reintal said:
Just bootlop
Click to expand...
Click to collapse
Did you format data? If that didn't help, mind sending me a msg on irc?
https://kiwiirc.com/nextclient/irc.freenode.net?channel=#titandev

NFC does not work

reintal said:
NFC does not work
Click to expand...
Click to collapse
Works here? I just tried Android Beam.

LuK1337 said:
Works here? I just tried Android Beam.
Click to expand...
Click to collapse
He works with some issues, sometimes i can't read nfc cards and use android beam. I assume this is an application problem.

LuK1337 said:
oh btw you might want to use this TWRP for flashing my builds.
Click to expand...
Click to collapse
X10 plus I4293, use this TWRP 3.3.1-1,
if use fastboot boot twrp.img, the touch is right,
if install Recovery ramdisk, then use Vol- and Power into twrp, the Touch is unavailable！

easyt said:
X10 plus I4293, use this TWRP 3.3.1-1,
if use fastboot boot twrp.img, the touch is right,
if install Recovery ramdisk, then use Vol- and Power into twrp, the Touch is unavailable！
Click to expand...
Click to collapse
Oh. I kinda understand why something like this would happen...
Can you come irc? I don't want to reflash stock just to debug this.
EDIT: Maybe fixed in twrp-3.3.1-2-mermaid.img.

LuK1337 said:
Oh. I kinda understand why something like this would happen...
Can you come irc? I don't want to reflash stock just to debug this.
EDIT: Maybe fixed in twrp-3.3.1-2-mermaid.img.
Click to expand...
Click to collapse
I re-flashed the official firmware, and then flash twrp again, it's right!
thank you

Two sim
LuK1337 said:
Oh. I kinda understand why something like this would happen...
Can you come irc? I don't want to reflash stock just to debug this.
EDIT: Maybe fixed in twrp-3.3.1-2-mermaid.img.
Click to expand...
Click to collapse
Two sim does not work when an SD card is inserted

Stezko said:
Two sim does not work when an SD card is inserted
Click to expand...
Click to collapse
Hmm...I would need you to test something for me in that case. Mind sending me a msg on irc/hangouts/discord?

LuK1337 said:
Hmm...I would need you to test something for me in that case. Mind sending me a msg on irc/hangouts/discord?
Click to expand...
Click to collapse
my english level is zero)
The second question is, is it possible to install Magisk on this rom?
I install Magisk-v20.3.zip via twrp and get a bootloop

Stezko said:
my english level is zero)
The second question is, is it possible to install Magisk on this rom?
I install Magisk-v20.3.zip via twrp and get a bootloop
Click to expand...
Click to collapse
I don't really care whether your english is perfect or not. I just need you to test that for me...
I can't say much about magisk tho, I don't use it.
EDIT: I guess that was too much to ask for... If there's anyone with dsds device who wants to be helpful, please msg me. I would prefer to release something tested rather than hope for the best.

Stezko said:
my english level is zero)
The second question is, is it possible to install Magisk on this rom?
I install Magisk-v20.3.zip via twrp and get a bootloop
Click to expand...
Click to collapse
Everything works without problems https://imgur.com/a/ij094yH

Camera2api
Hello!
I'm using this build for daily use! I can say it's really smooth and, no issues at all!
My only question is if enabling camera2api is possible, and then install a working version of gcam...
Any help will be appreciated!
I'm also willing to provide feedback and make my mobile a Guinea pig to make this work!:fingers-crossed:

Lineage is running stable with semc addons, Gapps, tai chi, and root with magisk 20.3.
fastboot boot boot.img and reboot to recovery ramdisk worked best.
After failing to successfully root flashing magisk.zip, I got a boot image
from a twrp backup. I renamed boot.emmc.win to boot.img and patched
with Magisk. Flashed the new boot.img, magisk.zip, and had root on startup.

Any recommended gapps? Tried both open gapps nano and micro and both force close on account setup

aeppacher said:
Any recommended gapps? Tried both open gapps nano and micro and both force close on account setup
Click to expand...
Click to collapse
Did you even format data?

LuK1337 said:
Did you even format data?
Click to expand...
Click to collapse
Did a full format before installation and then after lineage install. Tried factory reset after gapps installation and tried 3 different dates for gapps in case it was a new bug. Are you suggesting to do an installation, gapps, then full format?

[ROM][OFFICIAL][instantnoodle][11] LineageOS 18.1

Many thanks for making op8 officially built. I've been on since yesterday early and no issues other than can't call upon "hey google" to use assistant. But from what I've seen only works on stock. If anyone knows a fix , please share. Long press home button pulls it up but not hands free. ok ultranoob just told me I used wrong gapps using NikGapps. And linked to to correct ones. I will reflash. Said it's working fine on his end

thank you for making op8 officially

niceeee

mattie_49 said:
Many thanks for making op8 officially built. I've been on since yesterday early and no issues other than can't call upon "hey google" to use assistant. But from what I've seen only works on stock. If anyone knows a fix , please share. Long press home button pulls it up but not hands free. ok ultranoob just told me I used wrong gapps using NikGapps. And linked to to correct ones. I will reflash. Said it's working fine on his end
Click to expand...
Click to collapse
Am planning to take the dip... which is the correct Gapps to use? And if you can spare time to write the steps to install them would be appreciated.

sjgoel said:
Am planning to take the dip... which is the correct Gapps to use? And if you can spare time to write the steps to install them would be appreciated.
Click to expand...
Click to collapse
Still unknown. NikGapps work fine but break "hey google". Working with ultranoob one of the maintainers to get sorted out. I'll lyk asap. Use Nikgapps if you don't use your assistant hands free. Adb sideload name of package. Through Lineage recovery
Install LineageOS on instantnoodle | LineageOS Wiki
wiki.lineageos.org

mattie_49 said:
Still unknown. NikGapps work fine but break "hey google". Working with ultranoob one of the maintainers to get sorted out. I'll lyk asap. Use Nikgapps if you don't use your assistant hands free. Adb sideload name of package. Through Lineage recovery
Install LineageOS on instantnoodle | LineageOS Wiki
wiki.lineageos.org
Click to expand...
Click to collapse
Ok. Did you try to use the suggested gapps on the lineageOS website MindTheGapps for lineageOS 11 ?

sjgoel said:
Ok. Did you try to use the suggested gapps on the lineageOS website MindTheGapps for lineageOS 11 ?
Click to expand...
Click to collapse
Yes and Nikgapps both

mattie_49 said:
Many thanks for making op8 officially built. I've been on since yesterday early and no issues other than can't call upon "hey google" to use assistant. But from what I've seen only works on stock. If anyone knows a fix , please share. Long press home button pulls it up but not hands free. ok ultranoob just told me I used wrong gapps using NikGapps. And linked to to correct ones. I will reflash. Said it's working fine on his end
Click to expand...
Click to collapse
Coming from the unofficial build, I assume (also mentioned in the unofficial thread) we can dirty flash since the sources are the same, but could i ask for the specific steps you took? Did you apply the copy partitions step too?

mvmike said:
Coming from the unofficial build, I assume (also mentioned in the unofficial thread) we can dirty flash since the sources are the same, but could i ask for the specific steps you took? Did you apply the copy partitions step too?
Click to expand...
Click to collapse
Tried going to official from unofficial and didn't like it. Had to clean flash to work.

Stoked to have an official build! It installs & runs great, thanks to all who made this possible for OP8!
It's nice to know it will always be updated and maintained - I was on DOT OS and loved it with Hasty kernel but the thread appears dead so here I am.

mvmike said:
Coming from the unofficial build, I assume (also mentioned in the unofficial thread) we can dirty flash since the sources are the same, but could i ask for the specific steps you took? Did you apply the copy partitions step too?
Click to expand...
Click to collapse
I did the copy partions zip only because im coming from fresh msm then unlock. And only had oos on one side.

Copying bugs from the closed thread with some additions:
1) Display is too light on minimal brightness, it's not comfortable to use in darkness. Also, it seems its too dark on maximum brightness, but I am not sure.
2) Phone speaker too loud on minimal volume. Everybody in room can hear my interlocutor.
3) Gravitation sensor work fine in apps like SatStat, but not in camera apps: OpenCamera and GCam. While making a photo, horizontal line in camera react to position change very, very slowly. It take about 15 seconds to display real horizon.
4) Not sure its a software problem, but nevertheless: Acc daemon + AccA app cannot limit battery charging voltage. This feature is very usefull to prolong battery live.
5) Phone setting to check Proximity settings before activation is not working, so, phone aims to go active in pocket. Proximity sensor itself is working (proved with SatStat app).
6) May be related to (1). Light sensor shows illumination value about 2..6 times more that it should be (tested with SatStat on a few devices). Error multiplicator not so big in dark place and grows with illumination level.

passion8059 said:
Tried going to official from unofficial and didn't like it. Had to clean flash to work.
Click to expand...
Click to collapse
Same issue here, but hey, another factory reset it's worth it if we end up with a supported official build

Is it possible to get Magisk or something else like it installed with this? I'd like to root and prevent apps from knowing, so they all function as normal.

Guys do i need to copy partitions a and b if im changing from Pixel Experience?

chriswcs said:
Is it possible to get Magisk or something else like it installed with this? I'd like to root and prevent apps from knowing, so they all function as normal.
Click to expand...
Click to collapse
Lineage never had any issue with Magisk, have both nikgapps (core) + Magisk working perfectly.
Just follow the instructions and remember to let system boot once after fresh install before

mvmike said:
Lineage never had any issue with Magisk, have both nikgapps (core) + Magisk working perfectly.
Just follow the instructions and remember to let system boot once after fresh install before
Click to expand...
Click to collapse
How did you get the boot.img to patch though? I couldn't find one in the .zip file.

chriswcs said:
How did you get the boot.img to patch though? I couldn't find one in the .zip file.
Click to expand...
Click to collapse
Search for payload dumper. Can be used in Windows as a standalone program, or making use of Python3 under Linux as well. Doing so, you will be able to extract the boot.img to be patched with Magisk. Very good explanations on howto, here on XDA.

chriswcs said:
How did you get the boot.img to patch though? I couldn't find one in the .zip file.
Click to expand...
Click to collapse
Although made for Nokia, the steps in this thread generally apply. You have to download your Oneplus OTA of course.
[Guide] How to extract payload.bin from OTA
This is guide for extract payload.bin from OTA zip file ----------------- Pre-requirement: - Python3 ----------------- For extract OTA update Please flow step by step instruction Step 1: Get a OTA for Nokia 7 plus -> here Step 2: Download...
forum.xda-developers.com

[ROM][UNOFFICIAL][12.1][DISCONTINUED] LineageOS 19.1 for Galaxy Note10/Note10+/Note10+ 5G Exynos

Requirements:
Any Q, R or S based firmware installed on your device.
Pre-Install Instructions
Warning: The following instructions will unlock the bootloader and wipe all userdata on the device.
Connect the device to a Wi-Fi network.
Enable Developer Options by pressing the “Build Number” option in the “Settings” app within the “About” menu
From within the Developer options menu, enable OEM unlock.
Power off the device, and boot it into download mode:
With the device powered off, hold Volume Down + Volume Up and connect USB cable to PC.
Now, click the button that the onscren instructions coorelate to “Continue” and/or “Unlock Bootloader”.
Your device will reboot, you may now unplug the USB cable from your device.
The device will demand you format userdata, please follow the onscreen instructions to do so.
Run through Android Setup skipping everything you can, then connect the device to a Wi-Fi network.
Re-enable Development settings by clicking the “Build Number” option 10 times, in the “Settings” app within the “About” menu, and verify that “OEM Unlock” is still enabled in the “Developer options” menu.
Installing LineageOS for the first time
Flash lineage recovery
Only the provided lineage recovery will be supported,
using TWRP might result in a possible data loss!!
If using Odin rename the lineage recovery image for your model to recovery.img and add it to a .tar archive using e.g 7zip.
If using Heimdall use: heimdall flash --RECOVERY recovery.img --no-reboot
Boot lineage recovery
IMPORTANT: Do not boot into system again before booting recovery, or system will restore stock recovery!
If using Odin untick auto-reboot before flashing.
After flashing reboot by pressing Volume Down and Power for approximately 7 seconds,
immediately hold Volume Up and Power to boot recovery
IMPORTANT: As of OneUI 3 your device needs to be connected to a PC via USB cable in order to be able to
boot recovery via Volume Up, Bixby and Power.
Factory reset using Factory reset -> Format data/factory reset
Warning: Unlike TWRP this will also erase internal storage!
Sideload LineageOS by enabling sideload via Apply Update -> Apply from ADB
Then run adb sideload <path to your lineage.zip> on your PC
Optional:
Sideload GApps and magisk by repeating above step
with their zip/apk
Magisk
As this ROM has a working ramdisk sideloading the magisk apk is enough, just as it is
on every other device, no bootimage with magisk included or installing to recovery is needed!
I also strongly recommend to use Lygisk instead,
which is a fork of Magisk that aims to improve support for devices with FBE that can't (and shouldn't anyways!) decrypt userdata in recovery,
this will also fix OTAs getting stuck while having installed Magisk.

Features
SELinux enforcing
AES-256-XTS FBE encryption
Latest Linux 4.14.x kernel
All cameras are working
Ramdisk is working
Known issues
VoLTE/VoWiFi
You tell me

All sound systems are not working
Who encountered this kind of problem

keidnoi said:
All sound systems are not working
Who encountered this kind of problem
Click to expand...
Click to collapse
Fixed builds are on the way and will be uploaded later today, sorry for this

Linux4 said:
Fixed builds are on the way and will be uploaded later today, sorry for this
Click to expand...
Click to collapse
thanks for fixed

Reading through the changelogs I noticed support for the s pen. What apps need to be installed or are pre-installed? Excellent work to bring 12 to the Note so early.

srdempster said:
Reading through the changelogs I noticed support for the s pen. What apps need to be installed or are pre-installed? Excellent work to bring 12 to the Note so early.
Click to expand...
Click to collapse
There are no preinstalled apps for use with S-Pen.
Any third party app with support for a stylus should work (e.g Notes apps like Squid, etc...).

Is 5g lost as well as volte/vowifi?

Hey guys! Will this rom work with SM-N975W? Or is it only for 975F ?
Thanks in advance!
rhY

The alarm clock is not working I want you to fix it

感谢你们为rom所做的一切，期待正式发布。
Translated by GT: Thank you for everything you have done for rom and look forward to the official release.

keidnoi said:
The alarm clock is not working I want you to fix it
Click to expand...
Click to collapse
did you upgrade from 18.1? if yes, it's because the clock app is pure aosp right now on lineage 19. Wiping app data for the clock app will fix it.

A2L5E0X1 said:
did you upgrade from 18.1? if yes, it's because the clock app is pure aosp right now on lineage 19. Wiping app data for the clock app will fix it.
Click to expand...
Click to collapse
I upgraded from stock rom. I wiped the data while flashing this rom.
But the alarm clock app is not working. I wake up late every day clock does not wake me

This is BS it doesn't sorry I'm being mean I'm just really annoyed it wouldn't boot into recovery mode infinite download mode please someone tell me how to fix and if it requires flashing the stock stuff I'm throwing this stupid phone in the bin sorry. The reason I'm not doing it is because it literally says 10 years to download and I'm not lying

Great ROM, thanks to developers
But bluetooth calls not working, known bug or its only me?

ICV said:
Great ROM, thanks to developers
But bluetooth calls not working, known bug or its only me?
Click to expand...
Click to collapse
Are you on today's build already? Most likely not.

Linux4 said:
Are you on today's build already? Most likely not.
Click to expand...
Click to collapse
Not, I'm trying it right now!. thanks, loving this rom

New builds are up including some more lineage features added back and third party keyboard apps no longer crashing.

Linux4 said:
New builds are up including some more lineage features added back and third party keyboard apps no longer crashing.
Click to expand...
Click to collapse
This build, the battery drains faster than the previous build. Now I go back to the previous build to wait for the battery fix in the next build. Thank you.

[ROM][UNOFFICIAL][13.0][OTA][Signature Spoofing][Open Source][Encryption] LineageOS 20 for Galaxy Note10/Note10+/Note10+ 5G Exynos

Pre-Install Instructions
Warning: The following instructions will unlock the bootloader and wipe all userdata on the device.
Connect the device to a Wi-Fi network.
Enable Developer Options by pressing the “Build Number” option in the “Settings” app within the “About” menu
From within the Developer options menu, enable OEM unlock.
Power off the device, and boot it into download mode:
With the device powered off, hold Volume Down + Volume Up and connect USB cable to PC.
Now, click the button that the onscren instructions coorelate to “Continue” and/or “Unlock Bootloader”.
Your device will reboot, you may now unplug the USB cable from your device.
The device will demand you format userdata, please follow the onscreen instructions to do so.
Run through Android Setup skipping everything you can, then connect the device to a Wi-Fi network.
Re-enable Development settings by clicking the “Build Number” option 10 times, in the “Settings” app within the “About” menu, and verify that “OEM Unlock” is still enabled in the “Developer options” menu.
Installing LineageOS for the first time
Flash lineage recovery
Only the provided lineage recovery will be supported,
using TWRP might result in a possible data loss!!
If using Odin rename the lineage recovery image for your model to recovery.img and add it to a .tar archive using e.g 7zip.
If using Heimdall use: heimdall flash --RECOVERY recovery.img --no-reboot
Boot lineage recovery
IMPORTANT: Do not boot into system again before booting recovery, or system will restore stock recovery!
If using Odin untick auto-reboot before flashing.
After flashing reboot by pressing Volume Down and Power for approximately 7 seconds,
immediately hold Volume Up and Power to boot recovery
IMPORTANT: As of OneUI 3 your device needs to be connected to a PC via USB cable in order to be able to
boot recovery via Volume Up, Bixby and Power.
Factory reset using Factory reset -> Format data/factory reset
Warning: Unlike TWRP this will also erase internal storage!
Sideload LineageOS by enabling sideload via Apply Update -> Apply from ADB
Then run adb sideload <path to your lineage.zip> on your PC
Optional:
Sideload GApps and magisk by repeating above step
with their zip/apk
Magisk
As this ROM has a working ramdisk sideloading the magisk apk is enough, just as it is
on every other device, no bootimage with magisk included or installing to recovery is needed!
I also strongly recommend to use Lygisk instead,
which is a fork of Magisk that aims to improve support for devices with FBE that can't (and shouldn't anyways!) decrypt userdata in recovery,
this will also fix OTAs getting stuck while having installed Magisk.

Features
SELinux enforcing
AES-256-XTS FBE encryption
All cameras are working
Ramdisk is working
Known issues
VoLTE/VoWiFi
You tell me
Likely more

Which gapps should i use?

I have flashed this rom and booted successfully but i didnt get any welcome screen to setup phone. it directly booted up to homescreen. seems to fast . i flashed nikegapps core

I'm a Samsung Galaxy Note 10+ plus owner and happy with phone but want to get out of the Google ecosphere in replacing it with a Linux competitive OS.
Is that even possible?

Can I use this with the Note10 5G (SM-N971N)?

Galaxy-Shadow said:
I'm a Samsung Galaxy Note 10+ plus owner and happy with phone but want to get out of the Google ecosphere in replacing it with a Linux competitive OS.
Is that even possible?
Click to expand...
Click to collapse
Info about Samsung Galaxy Note10+ - d2s

VesLikeVest said:
Can I use this with the Note10 5G (SM-N971N)?
Click to expand...
Click to collapse
did you read what's written right under Downloads, in the first post?

Replaced with LineageOS

Galaxy-Shadow said:
I'm a Samsung Galaxy Note 10+ plus owner and happy with phone but want to get out of the Google ecosphere in replacing it with a Linux competitive OS.
Is that even possible?
Click to expand...
Click to collapse
Look up 'Andronix' in the Google Play Store. Andronix allows one to install Linux under your phone,...

Thanks for reply,
Would Andronix allow a replacement for the Google Android within Samsung or is this like running Linux on top of it? I'm looking for something to completely replace the Google Android without Gmail, G-Maps and so on if thats even possible?

Galaxy-Shadow said:
Thanks for reply,
Would Andronix allow a replacement for the Google Android within Samsung or is this like running Linux on top of it? I'm looking for something to completely replace the Google Android without Gmail, G-Maps and so on if thats even possible?
Click to expand...
Click to collapse
Oh sorry,... Andronix is just LinuxOnPhone,... You be lookin for Lineage or anything in the main Note 10+ forum room with a [ROM] tag in it,.. higher numbers the better,.. like [ROM][Lineage19.1] would be android 12 from the cyanogenmod team,...

Thank you so much for keeping our phone alive!!
Humble question: Will there (in the future) also be a version with signature spoofing for using MicroG?
Best regards, tempe

Updated with September securitypatch and more lineage features

Thank you. This is amazingly fast and will allow me to continue using my note 10+

Wow! Thanks for the ROM
This is blazingly fast, even the "old" fingerprint reader is seemingly instant.
Maybe you should work for samsung....

screenshots anyone?samsung restore is available?theme changing possible?

I installed LineageOS 20 for Galaxy Note10 but the logo hangs. I use TWRP (twrp-3.6.2_9-2-d1.img.tar). Can anyone help me?

fipter said:
I installed LineageOS 20 for Galaxy Note10 but the logo hangs. I use TWRP (twrp-3.6.2_9-2-d1.img.tar). Can anyone help me?
Click to expand...
Click to collapse
Read more carefully. TWRP is not supported here at all.

Database Info

welcome