after software to recover imei the phone is dead no boot no com port not conacting to the pc nothing
karrar.xx said:
after software to recover imei the phone is dead no boot no com port not conacting to the pc nothing
Click to expand...
Click to collapse
Is there anything seen like QUSB9008 on your PC when pluged in PC?
Share us a photo
I have the same problem that you do not imei no fingerprint you could solve something or how will you do to me the usb diag driver does not recognize me as how you did it to recognize it
jjgvv said:
Is there anything seen like QUSB9008 on your PC when pluged in PC?
Click to expand...
Click to collapse
no sound no conact no usb port
karrar.xx said:
no sound no conact no usb port
Click to expand...
Click to collapse
hmmmmm
karrar.xx said:
no sound no conact no usb port
Click to expand...
Click to collapse
Able to get into bootloader? And which of the 2 port did you connect to pc?
Monopod said:
Able to get into bootloader? And which of the 2 port did you connect to pc?
Click to expand...
Click to collapse
i think the boot is broken no connect 2 port
THE SAME PROBLEM HAPPENED WITH MY DEVICE I FIND A SOLUTION
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
mustafayurdagul said:
THE SAME PROBLEM HAPPENED WITH MY DEVICE I FIND A SOLUTION
View attachment 5271743
Click to expand...
Click to collapse
what"s the solution? same for me !
iloveyouzappa said:
what"s the solution? same for me !
Click to expand...
Click to collapse
phone is dead no boot no com port not conacting to the pc nothing
the phome try to power up flashinh back a couple of time then its close its self !
mustafayurdagul said:
THE SAME PROBLEM HAPPENED WITH MY DEVICE I FIND A SOLUTION
View attachment 5271743
Click to expand...
Click to collapse
wha"s the solution please?
iloveyouzappa said:
wha"s the solution please?
Click to expand...
Click to collapse
EDL mode
how ? its there testing poing for edl ?
iloveyouzappa said:
how ? its there testing poing for edl ?
Click to expand...
Click to collapse
press and hold Volume Up + Down.
plug usb at the side port to you PC while pressing volume up and down.
you should hear a sound from pc,and your device stays black screen.
done EDL
Friends, have you found a solution to the issue, I still haven't been resolved.
iloveyouzappa said:
phone is dead no boot no com port not conacting to the pc nothing
Click to expand...
Click to collapse
It's impossible that there's no detection in computer. There should be while pressing volume down + power. Try the other ports vice versa. Try to uninstall all the Qualcomm drivers and install a updated drivers. There's a software to see what device is connected even you can't see in Device Manager.
me too, the phone dead after flash rom via QFIL, the phone now black screen and can't connect to 9008 @@
Hi
I ran the same situation with my phone. A new phone that never work.
You have to download the Lenovo Rescue And Smart Assistant(LMSA). You have to put your imei to download the software. One that software is downloaded. Connect the phone to the port that is in one side of the phone and press vol up + vol down + power. If the program didnt recognizes appear a help to you connect.
In my case cannot recognizes in the first try, and in the second can.
Hope you can recover your phone.
Good Luck
Related
Hey there,
So I have a 6045Y (5.5), which I kinda bricked? Wanted to install MM on my phone via TWRP, didn't work. Oh, it also deleted my OS.
So I went ahead and tried to install "Project Material" (https://forum.xda-developers.com/idol-3/development/6045-project-material-t3417757), well, didn't work too, "unable to unmount /system". I googled and found out that there's another twrp version that could do that. Then I tried to install the .img file via TWRP too, since I read that it should work. It didn't and now I can neither enter recovery nor Download mode, dba doesn't detect my device too, but my PC does make a sound when I connect and disconnect my phone and I see the battery, while charging the phone.
Any idea would be appreciated.
I'm dumb, I know, please don't be too hard on me!
Edit: The title could be missleading, I can still turn on my phone! I'm stuck at the Alcatel logo though.
Akrosmex said:
Hey there,
So I have a 6045Y (5.5), which I kinda bricked? Wanted to install MM on my phone via TWRP, didn't work. Oh, it also deleted my OS.
So I went ahead and tried to install "Project Material" (https://forum.xda-developers.com/idol-3/development/6045-project-material-t3417757), well, didn't work too, "unable to unmount /system". I googled and found out that there's another twrp version that could do that. Then I tried to install the .img file via TWRP too, since I read that it should work. It didn't and now I can neither enter recovery nor Download mode, dba doesn't detect my device too, but my PC does make a sound when I connect and disconnect my phone and I see the battery, while charging the phone.
Any idea would be appreciated.
I'm dumb, I know, please don't be too hard on me!
Click to expand...
Click to collapse
What twrp version did you have? and you can try with panasonic eluga switch firmware program i had the same issue and i just wait to come charging icon and connect to pc and then program detect the device and switched to download mode
Sent from my 6045I using Tapatalk
Alek Dev said:
What twrp version did you have?
Sent from my 6045I using Tapatalk
Click to expand...
Click to collapse
I think 2.8.7.0.
Akrosmex said:
I think 2.8.7.0.
Click to expand...
Click to collapse
you can try with panasonic eluga switch firmware program i had the same issue and i just wait to come charging icon and connect to pc and then program detect the device and switched to download mode
Sent from my 6045I using Tapatalk
Alek Dev said:
you can try with panasonic eluga switch firmware program i had the same issue and i just wait to come charging icon and connect to pc and then program detect the device and switched to download mode
Sent from my 6045I using Tapatalk
Click to expand...
Click to collapse
Oh, really?
Thanks, I'll try that!
Alek Dev said:
you can try with panasonic eluga switch firmware program i had the same issue and i just wait to come charging icon and connect to pc and then program detect the device and switched to download mode
Sent from my 6045I using Tapatalk
Click to expand...
Click to collapse
Hmm, sadly my phone won't show up, even though I did install the drivers. What could be the problem?
Also, my PC detects my phone as a MTP USB Device.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My Oneplus 8T is in edl mode only. Cannot boot to rom, cannot boot to fastboot. Just black screen in edl mode. When using msm tool it showing error of "open serial device failed". Please help me
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Have you tried holding Volume up and power until it reboots? That is how I got out of EDL mode.
For the error, have you tried different USB ports? I ended up having to use a USB 2 port on the back of my motherboard before it would work. But I got different errors then you.
Qnorsten said:
Have you tried holding Volume up and power until it reboots? That is how I got out of EDL mode.
For the error, have you tried different USB ports? I ended up having to use a USB 2 port on the back of my motherboard before it would work. But I got different errors then you.
Click to expand...
Click to collapse
I've try holding that combination. Still it boots back to edl mode
Tried both 3.0 and 2.0 same error "open serial device failed" and "automatic detection of DDR failed"
That looks like that your Phone is not listed correctly in Device Manager. Look in Device Manager on your PC whether your Phone is listed as QDLOADER 9008. If it is liested as QHUSB_BULK, then you need to update the Qualcomm driver
I am fairly certain the phone is okay but the drivers on the computer you're using are not.
Ayemnaim said:
My Oneplus 8T is in edl mode only. Cannot boot to rom, cannot boot to fastboot. Just black screen in edl mode. When using msm tool it showing error of "open serial device failed". Please help me
View attachment 5177023
Click to expand...
Click to collapse
Install these drivers on your Windows..It worked for me..
I'm having this same issue. I've tried all USB ports including 2.0 as people are recommending. I've installed the Qualcomm USB driver as well. It shows up as HS USB QDLoader 9008 but still I can't seem to get it working. I am trying to flash the global ROM on my sim unlocked T-Mobile OnePlus 7T
Sack206 said:
I'm having this same issue. I've tried all USB ports including 2.0 as people are recommending. I've installed the Qualcomm USB driver as well. It shows up as HS USB QDLoader 9008 but still I can't seem to get it working. I am trying to flash the global ROM on my sim unlocked T-Mobile OnePlus 7T
Click to expand...
Click to collapse
Wrong forum tho.
xocomaox said:
Wrong forum tho.
Click to expand...
Click to collapse
I was focused on the "open serial device failed" issue because that's the problem I'm stuck at. Sorry, nvm my post
I HAVE BRICKED MY PHONE BY INSTALLING TWRP AND FLASHING CUSTOM ROM ON TWRP MY LEX507 IS DEAD .
I TRIED TO FLASH MY MOBILE BUT I AM RECIVING MORE ERROR ON FLASH TOOL
ANOTHER THINK IS IN MY COMPUTER WHEM I CONNECT MY LECO DEVICE IT CONTINOUSLY DETECTING AND UNDETECTING TWO DEVICES
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SOMETIMES IT DETECTS MTK USB
SOMETIMES IT DETECTS PRELOADER USB VCOM PORT
THEN OTHER ERRORS FROM FLASHING TOOL I RECIVE ARE AS FOLLOWS
*
ERROR CODE 5000
*
ERROR CODE 6029
*
ERROR CODE 2005
*
ERROR CODE 2004
PLEASE ANY ONE HELP ME PLZ HELP AS SOON AS POSSIBLE
Can you enter the recovery? If you cannot, the phone is hard bricked. You can't do anything about it.
I CAN'T ENTER RECOVERY IN MY PHONE. IT IS NOT AT ALL BOOTING .
WHEN I CONNECT TO CHARGER RED LED GLOWS.
IS THERE ANY OTHER OPTIONS TO RECOVERY IT.
I AM CRYING.
Have you tried from a device running a supported OS? (not Windows 11)
Not certain if it has anything to do, but AFAIK Windows 11 is only in beta.
I HAVE TRIED FROM WINDOWS 10 ONLY.
PLEASE ANYONE HELP ME I WANT MY PHONE BACK
jason141207 said:
I CAN'T ENTER RECOVERY IN MY PHONE. IT IS NOT AT ALL BOOTING .
WHEN I CONNECT TO CHARGER RED LED GLOWS.
IS THERE ANY OTHER OPTIONS TO RECOVERY IT.
I AM CRYING.
Click to expand...
Click to collapse
Can you enter fastboot or Download mode? Chances are pretty low you can actually do something to be honest...
Those kinds of things happen. It's happened to me tone of times.
dedq said:
Can you enter fastboot or Download mode? Chances are pretty low you can actually do something to be honest...
Those kinds of things happen. It's happened to me tone of times.
Click to expand...
Click to collapse
NO MY PHONE NOT AT ALL BOOTING, WHEN I CONNECT TO CHARGER RED LIGHT GLOWS
jason141207 said:
NO MY PHONE NOT AT ALL BOOTING, WHEN I CONNECT TO CHARGER RED LIGHT GLOWS
Click to expand...
Click to collapse
That is hard brick and go take it somewhere to some third-party technician who will be able to fix it.
dedq said:
That is hard brick and go take it somewhere to some third-party technician who will be able to fix it.
Click to expand...
Click to collapse
THEN MY PHONE DEAD THAT'S ALL,
So i was trying to install twrp and it failed and the phone displayed this "the current image(boot/recovery) have been destroyed" and keeps turning on and off. Later it restarts and got stuck in the logo "Realme with powered by Android". I don't know what happened. I can't press volume up and power button. So I waited till it drains its battery. So I tried charging it back and it shows charging red. Then when it reaches to a point where it can turn on, It got stuck in the charging white logo thingy and it wont let me do anything.
But after a few tries it finally wont turn on.
I tried connecting it to the computer and somehow it shows an unknown driver.
QUSB_BULK_CID:0411_SN:B3336417
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have no idea what that is but I know that "B3336417" is the ID of the phone.
Can anyone help me how to fix this phone?
Assuming you've correctly installed ADB driver on Windows 10 then if USB Debugging didn't get enabled on phone you'll NOT see the phone in Windows' Device Manager under Portable Devices - where it should be shown.
Try installing MTK Drivers, it should fix the problem
EDIT: Then flash Stock ROM using SP Flash Tool V5
jwoegerbauer said:
Assuming you've correctly installed ADB driver on Windows 10 then if USB Debugging didn't get enabled on phone you'll NOT see the phone in Windows' Device Manager under Portable Devices - where it should be shown.
Click to expand...
Click to collapse
I pressed volume up + volume down + power button and it takes me to fastboot mode. Do you know how to restore back the phone? where can I find the stock rom for realme 5i?
NoveNoki said:
Try installing MTK Drivers, it should fix the problem
EDIT: Then flash Stock ROM using SP Flash Tool V5
Click to expand...
Click to collapse
I pressed volume up + volume down + power button and it takes me to fastboot mode. Do you know how to restore back the phone? where can I find the stock rom for realme 5i?
Grim Face said:
I pressed volume up + volume down + power button and it takes me to fastboot mode. Do you know how to restore back the phone? where can I find the stock rom for realme 5i?
Click to expand...
Click to collapse
Here are official ROM files from all Realme phones: https://www.realme.com/eu/support/software-update just search for your phone and you should find it, tho you will need a computer so you can flash the files
EDIT: Do you know if your device uses MediaTek chip?
NoveNoki said:
Here are official ROM files from all Realme phones: https://www.realme.com/eu/support/software-update just search for your phone and you should find it, tho you will need a computer so you can flash the files
EDIT: Do you know if your device uses MediaTek chip?
Click to expand...
Click to collapse
My phone uses Snapdragon but I finally have OrangeFox recovery
NoveNoki said:
Here are official ROM files from all Realme phones: https://www.realme.com/eu/support/software-update just search for your phone and you should find it, tho you will need a computer so you can flash the files
EDIT: Do you know if your device uses MediaTek chip?
Click to expand...
Click to collapse
Can I flash my rom to the Orange Fox Recovery mode? It seems that my OS is gone.
Grim Face said:
Can I flash my rom to the Orange Fox Recovery mode? It seems that my OS is gone.
Click to expand...
Click to collapse
I think you should be able to, i am not too sure. But i whould recommend you to flash it manually using the fastboot mode, tho if you can try flashing it from the recovery
need help guys my phone is stock on updating then reboot updating i think it's bootloop. i cant go to recovery and my pc can't detect my phone on fastboot or even on the technician i know event in EDL mode test point the led only flashing but nothing appear in the device manager i try 5 pc/laptop same problem
ryzen23 said:
guys my phone is stock on updating then reboot updating i think it's bootloop. i cant go to recovery and my
Click to expand...
Click to collapse
Hi , have you try Test point?
do you have dissabled signature drivers to install all drivers? like qualcom drivers and fastboot and adb from Mi flash tool...
Enriquecalong said:
Hi , have you try Test point?
do you have dissabled signature drivers to install all drivers? like qualcom drivers and fastboot and adb from Mi flash tool...
Click to expand...
Click to collapse
I already try the test point you can read it in my post and i already install all fastboot drivers and Qualcomm driver and i disable the signature driver. my phone is not detected i try buy new cable 3x still not detected is this a hardware issue?
ryzen23 said:
I already try the test point you can read it in my post and i already install all fastboot drivers and Qualcomm driver and i disable the signature driver. my phone is not detected i try buy new cable 3x still not detected is this a hardware issue?
Click to expand...
Click to collapse
May be your port... you cant acces to recovery right? its on MIUI screen or Poco screen?
Enriquecalong said:
May be your port... you cant acces to recovery right? its on MIUI screen or Poco screen?
Click to expand...
Click to collapse
port of what? after the poco screen its updating that's when the phone will restart
ryzen23 said:
port of what? after the poco screen its updating that's when the phone will restart
Click to expand...
Click to collapse
Usb c port , try cleaning with isopropilic alcohol, the conectors... first disconect the batery XD .
with other phone your phone works?
QFILDownload
Qfil Driver 64xDownload
Standart Qualcom driver Download
Enriquecalong said:
Usb c port , try cleaning with isopropilic alcohol, the conectors... first disconect the batery XD .
with other phone your phone works?
Click to expand...
Click to collapse
already try cleaning the port
Enriquecalong said:
QFILDownload
Qfil Driver 64xDownload
Standart Qualcom driver Download
Click to expand...
Click to collapse
already install this
Enriquecalong said:
QFILDownload
Qfil Driver 64xDownload
Standart Qualcom driver Download
Click to expand...
Click to collapse
i think that you are watching in Device manager if your poco its readed, will be like Q9008 or something like that , or if your drivers are bad you will see an 'Unknown usb decription failed"
those drivers are for test point...
i think that you are not doing well the test point.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ryzen23 said:
already try cleaning the port
already install this
Click to expand...
Click to collapse
Try finding another port , there are a lots of poco x3 pro dead ... or aliexpress.
Enriquecalong said:
i think that you are watching in Device manager if your poco its readed, will be like Q9008 or something like that , or if your drivers are bad you will see an 'Unknown usb decription failed"
those drivers are for test point...
i think that you are not doing well the test point.
View attachment 5616137
Click to expand...
Click to collapse
i know when device is detected in device manager sir and edl mode when the LED is blinking the phone is in edl mode
ryzen23 said:
i know when device is detected in device manager sir and edl mode when the LED is blinking the phone is in edl mode
Click to expand...
Click to collapse
Oh ok , try with other port , if that didnt work you may need to use a JTAG tool , or can be that the pmic is middle dead cause of that your port is of , oor any lines in that has consume or is in short.. if you hav an tester , try to know if you recive the 5v from the USB C port to The respective pin USB DIAGRAM
update my phone got fixed some IC got burn it cost me a lot hahaha