If a device has no root, what ADB commands can I use to connect that device to WiFi? I need to be able to input SSID name, password, static local IP, DNS, etc. - all over ADB and without root.
I am not talking about ADB over WiFi over TCP port 5555. I am talking about connecting an Android device via USB cable and the connecting that Android device to WiFi, assuming the device has no WiFi networks added.
To bring up Android's Wi-Fi Settings via ADB you run
Code:
adb devices
adb shell "am start -a android.settings.WIFI_SETTINGS"
I'm not sure I understand the OP's question where it matters greatly whether the OP is on non-rooted Android 10 and below or non-rooted Android 11 and above.
Non-root Android 11 and above no longer needs the USB cable for adb to connect between Android and the PC via Wi-Fi.
There's more information here...
[adb,scrcpy,vysor] What ports does Android 12 randomly set when Wi-Fi connecting via Wireless debugging adb "pair" or "connect" commands?
(PSA) Using the new Android 12 TILE for 'Developer options' 'Wireless debugging' to establish adb connection over Wi-Fi without USB
What's the difference between Windows/Android adb "connect" versus adb "pair" when mirroring Android 12 over Wi-Fi onto a Windows PC?
some newer devices, like Samsung will let you use cmd binary.
So to connect to network look at "adb shell cmd wifi"
Currently, it's somethig like $ adb shell cmd wifi connect-network bssid passphrase network_type
Related
Hello guys,
I'm here with a way to issue adb commands to another android through WIFI network.
Prerequisites:-
1) 2 android (of course)
2) Basic knowledge in android
Steps:-
1)Select the device that you want to receive the commands [Here on will be referred to as "Device"]
2)Turn your WiFi hotspot on on device
3)Select the device that you want to issue commands to [Here on will be referred to as "Host"]
4)Connect the device to the host
5)Go to developer option and turn it on in "Device" and also turn on wireless adb if you are in lollipop.Or alternatively download ROM toolbox and enable wireless adb in there.You will receive a unique ip address with port
6) open terminal emulator in "Host" and type "adb connect IP" In place of IP type the IP address that you got in step 5
7) congrats you are now connected via an WiFi
Click thanks if I helped.?
Hello, I have little problem. I'd to debug my phone via WiFi so I have done this few steps:
adb tcpip 5555
adb connect <hereMyIp>:5555
unplug phone
And device disconnect from wifi adb, also I have turned on dev ops and it's work when phone is connected but when not no.
I tried this same to second phone and it's works fine so problem is with EMUI, anyone solve it ?
(Android 7.0 EMUI 5.0)
I have the same problem...
I solved problem on my Honor 8:
In developer options 1) turn on "Allow USB debugging", 2) turn on "Allow ADB debugging in charge only mode" and 3) turn off "Always prompt when connecting to USB".
Then do usuall steps:
1. adb tcpip 5555
2. adb connect <ip>:5555
3. unplug phone
So ADB over WiFi works!
Found this solution here:
https://forum.xda-developers.com/mate-9/help/udb-debugging-wont-stay-t3711939
In my case, it shows connected, but when I debug my application, all of a sudden it gets disconnected.
I solved the problem when I moved to Android 11 which has a new Developer option for Wireless debugging which enables adb to work completely over Wi-Fi with Android (no USB cable needed).
How exactly do you enable this on the Note 20 Ultra or any android for that matter? I'm in developers area and I only see an option for USB debugging. I went ahead and attempted to enable it via windows powershell (Instructions from Google sources) but when I go to .\adb connect <IP address> 5555 like instructed it doesn't work. Maybe someone can provide me with assistance. Thanks
https://stackoverflow.com/questions/4893953/run-install-debug-android-applications-over-wi-fi
This is the instruction I'm following.
And I'm trying to grant macrodroid permissions
Nvm I was inputting it incorrectly. Was able to connect wirelessly
I have a phone (Samsung A10E) that will not connect to the PC via USB (It's not the PC, I have a second of the same phone which connects fine, so SDK install and phone drivers are good). It is not rooted.
Is there anyway to perform ADB TCPIP 5555 on the phone itself or otherwise set the phone to accept wireless ADB commands with only the phone? (also no wireless debugging option available under Dev Options).
Thx for any suggestions!
NO.
A working ADB USB-connection is required to run
Code:
adb tcpip 5555
command
Hi. I've been playing with connecting my phone via ethernet, and notice that since (stock) android 11, enabling wireless debugging no longer enables generic local network adb access, it's now specifically for wireless only adb. Anyone know if there's a way to enable ethernet adb debugging, or where I can ask Google about it?
try
setprop persist.adb.tcp.port 5555
stop adbd
start adbd
adb connect <device ip>:5555
Ah, great idea, but requires root and I have not rooted or replaced the rom. Guess I may just have to wait until I have enough time, I suppose the warranty is close to finished.