Database Info

Any information on Root?

Want to buy this phone. Need it rooted to do a couple things. Has anybody gotten TWRP and root on it yet?

You can root it by first unlock the bootloader then install magisk via patch boot image method.

How should I get the boot image to actually use that method?

You can download the firmware here: https://mirrors.lolinet.com/firmware/moto/foles/official/RETUS/
Inside zips, find boot.img

Does anyone know anything about custom recovery TWRP yet that's what I'm looking for

there is no custom recovery

ahalol said:
You can root it by first unlock the bootloader then install magisk via patch boot image method.
Click to expand...
Click to collapse
What is the way to unlock the bootloader? I don't believe Motorola officially released it for the phone yet. Have you rooted this phone?

Thereplierbro said:
What is the way to unlock the bootloader? I don't believe Motorola officially released it for the phone yet. Have you rooted this phone?
Click to expand...
Click to collapse
Official unlock from Motorola is available, as long as you aren't referring to the Verizon version.

wraith1932 said:
Official unlock from Motorola is available, as long as you aren't referring to the Verizon version.
Click to expand...
Click to collapse
Does the Verizon one have a greyed out "OEM Bootloader unlock"
Because I bought one off offer up that had the button available but it was purchased from Verizon
Also I asked Motorola for the unlock website an they said they haven't released it yet for Moto z4

Can't say for sure myself, I got the carrier unlocked version. But I believe that button in the options is there no matter what, I remember it on my original Z Force Droid (Verizon only version, no bootloader unlock, official or not).
I would bet that, if it was bought at Verizon, then there won't be a bootloader unlock available - ever.
Dunno what that last part is supposed to mean... Never saw a device-specific Moto Bootloader Unlock page, going all the way back to the original Moto X. There's the page explaining the unlock process, a disclaimer ("anything you do from here isn't our fault, or responsibility to fix" basically), and a link to the next step (with a "log in to Moto" in between). After login, it brings you to instructions to get a code to put in, and the button to check if the device is eligible for unlocking the bootloader.
I would include a link to the first page if I could. Almost there, just one more post...

wraith1932 said:
Official unlock from Motorola is available, as long as you aren't referring to the Verizon version.
Click to expand...
Click to collapse
wraith1932 said:
Can't say for sure myself, I got the carrier unlocked version. But I believe that button in the options is there no matter what, I remember it on my original Z Force Droid (Verizon only version, no bootloader unlock, official or not).
I would bet that, if it was bought at Verizon, then there won't be a bootloader unlock available - ever.
Dunno what that last part is supposed to mean... Never saw a device-specific Moto Bootloader Unlock page, going all the way back to the original Moto X. There's the page explaining the unlock process, a disclaimer ("anything you do from here isn't our fault, or responsibility to fix" basically), and a link to the next step (with a "log in to Moto" in between). After login, it brings you to instructions to get a code to put in, and the button to check if the device is eligible for unlocking the bootloader.
I would include a link to the first page if I could. Almost there, just one more post...
Click to expand...
Click to collapse
All other phones, if the button is not greyed out and you can press the option (and it asked for your password) then it's unlockable. I know because I got a few freaking pixel phones with non usable Bootloader. Wasted about $1,000 looking for a cellphone to use with Sprint that I can root. Every one of them is Verizon.
https://support.motorola.com/us/en/solution/ms87215

DM Verity disabled too?
What about DM verity? Has anyone figured out how to disable that? I need to add a couple of lines to the build.prop file, but can't seem to change the write permissions even with root; any edits made directly on the phone using an editor with root permissions, don't persist after a system reboot. Edits made to the build.prop file externally, and pushed pre-boot via ADB, result in boot loop due to DM verity failing.
(For clarity, I do not have this phone, yet, I have a Z2 Play, but I faced these challenges with that device too)

Jade Eyed Wolf said:
What about DM verity? Has anyone figured out how to disable that? I need to add a couple of lines to the build.prop file, but can't seem to change the write permissions even with root; any edits made directly on the phone using an editor with root permissions, don't persist after a system reboot. Edits made to the build.prop file externally, and pushed pre-boot via ADB, result in boot loop due to DM verity failing.
(For clarity, I do not have this phone, yet, I have a Z2 Play, but I faced these challenges with that device too)
Click to expand...
Click to collapse
I hope a real dev jumps on board to this cellphone. It's pretty decent for what it is honestly

Thereplierbro said:
I hope a real dev jumps on board to this cellphone. It's pretty decent for what it is honestly
Click to expand...
Click to collapse
One of my main reasons for waiting to get one

Jade Eyed Wolf said:
One of my main reasons for waiting to get one
Click to expand...
Click to collapse
It's basically useless until then

Could I get a little guidance on how to patch and flash the boot image? I have ADB/Fastboot setup as well as the XT1980-4 firmware downloaded.
Do I just place the boot.img file on my phone, patch it in Magisk Manager, and flash with fastboot? Anything I need to be careful of?
Also, how should I go about backups here? I've only messed with this stuff when I had a Galaxy S4, everything was super simple with easy bootloader unlock and custom recovery.

battleof3 said:
Could I get a little guidance on how to patch and flash the boot image? I have ADB/Fastboot setup as well as the XT1980-4 firmware downloaded.
Do I just place the boot.img file on my phone, patch it in Magisk Manager, and flash with fastboot? Anything I need to be careful of?
Also, how should I go about backups here? I've only messed with this stuff when I had a Galaxy S4, everything was super simple with easy bootloader unlock and custom recovery.
Click to expand...
Click to collapse
What you said was correct. That's how you patch and flash. Nothing particular to be careful. The only thing would be in order to receive future OTA, you should not modify you /system and /vendor partition during your use of the phone.

ahalol said:
What you said was correct. That's how you patch and flash. Nothing particular to be careful. The only thing would be in order to receive future OTA, you should not modify you /system and /vendor partition during your use of the phone.
Click to expand...
Click to collapse
Dug a little deeper and bootloader is locked tight, no flashing for me. Returning and buying a secondhand LG V30 for cheap. It's unfortunate that carriers love their walled gardens.

See, this is why I was asking about DM Verity. You need to disable that first before flashing anything via ADB/Fastboot.
With DM Verity on, at system startup, the device generates a hash of the /system and /root directories. If the hash does not match the one from the factory, due to changes pushed via ADB or Fastboot or patching other system files with something different, the system reboots, again and again.
I had this same issue with my Z2 Play, which is why I brought it up here.
Rooting these devices is useless, unless you also disable DM Verity.

I tried to follow this method and ended up flashing the wrong boot image (I did go to the right software variant but it was outdated) so i had to go through and try all the images they had and none of them worked so i had to look elsewhere.
After some digging i found a VERY handy tool made by lenovo themselves that lets you update and recover the firmware.
If you use the rescue option and enter your phones info (it seems to verify your phones info so you can only download for devices you have) and it'll download the latest zip for you so you can get the boot image.
Here's the link to the smart assistant
TL;DR Open smart assistant, click flash, click "Go rescue", Click "Moto Phone", enter your phone's info (make sure your phone is connected in fastboot mode), click the download icon next to the file name.
Make sure you DO NOT click the rescue button when the download is finished as that will factory reset your phone, just copy the zip or boot image and close it

How To Guide [ROOT][GAPPS] Root and install GApps on stock Edge S/Chinese version

So you got the Edge S and want GApps? Basically you unlock your bootloader, root with Magisk, then install MagiskGApps.
DISCLAIMER: UNLOCKING YOUR BOOTLOADER MAY VOID YOUR WARRANTY, AND DOING ALL THESE THINGS IN THIS GUIDE MAY RESULT IN DAMAGE/BRICKING YOUR PHONE. I AM NOT RESPONSIBLE FOR ANYTHING YOU DO TO YOUR PHONE. PROCEED AT YOUR OWN RISK.
1. Unlock the bootloader: that should be doable with their global bootloader unlock website here.
2. Download Lenovo Motoroa Smart Assistant (Rescue and Smart Assistant), and follow its instructions to "rescue" your device. It will lead you to boot into bootloader mode and download the firmware. Find the firmware file via the LMSA's downloads (should have a "show folder" button). You'll need the boot.img file for Magisk.
3. Download Magisk, then follow its instructions. You'll have to copy the boot.img to your device, then use Magisk to patch the boot file, then copy the modified one to your PC.
4. You'll need fastboot. If you don't have it already, you can download the Android SDK platform tools here. Then go into the folder, Shift+Right Click the folder, then "Open Command Prompt" or "Open PowerShell," you should have something close to one of those two. Copy your Magisk modified .img file to that folder, then you'll want to input:
fastboot flash boot [modified .img file]
Once that completes, you should see in large text, "Start" on your phone next to the power button. Press the power button, and it should boot, and you should have root now.
5. Download MagiskGApps to your phone, open Magisk on your phone, click the button that looks like a puzzle piece at the bottom of the screen, "Modules." Click "Install from storage," locate the MagiskGApps file, and install it. After that it will ask you to restart your phone, do that, then you'll just have to be patient as it takes time once its restarted to load everything. You also may need to update some or all of the apps, then you should be able to use the notification to finish setting up the phone with Google Setup.
Thanks to Motorola for making it easy to unlock their bootloaders
Thanks to the whole Magisk team for making an easy, awesome root (and more!)
Thanks to Wacko1805 (and team?) for making MagiskGApps. This is really awesome.

unlock the BL and get root is will make some apps fingerprint and face ID fail?

kimker said:
unlock the BL and get root is will make some apps fingerprint and face ID fail?
Click to expand...
Click to collapse
Magisk has a "Magisk Hide" which will allow it to pass SafetyNet, and most things which check on device security will think the device is secure. But unlocking BL and rooting does make the device less secure, and therefore incurs its own risks apart from bricking or damaging the device.

HopelesRomantc91 said:
Magisk has a "Magisk Hide" which will allow it to pass SafetyNet, and most things which check on device security will think the device is secure. But unlocking BL and rooting does make the device less secure, and therefore incurs its own risks apart from bricking or damaging the device.
Click to expand...
Click to collapse
yes, i knew the unlock and root will take risk.. but not sure is Payment business apps using fingerprint will work normal.

kimker said:
yes, i knew the unlock and root will take risk.. but not sure is Payment business apps using fingerprint will work normal.
Click to expand...
Click to collapse
Google Pay works. But according to the Motorola website you should be able to relock the bootloader if yours doesn't work. But there's never any guarantee. If you need your device secure, recommend don't unlock bl or root, or wait to see if there's a root option without bootloader unlock that can be easily undone.

HopelesRomantc91 said:
Google Pay works. But according to the Motorola website you should be able to relock the bootloader if yours doesn't work. But there's never any guarantee. If you need your device secure, recommend don't unlock bl or root, or wait to see if there's a root option without bootloader unlock that can be easily undone.
Click to expand...
Click to collapse
I saw that someone’s edge s had unlocked the BL and Flash G100 firmware and everything worked normally, and then tried to lock the BL again, but it was unsuccessful and the system could not start. The flashing tool does not recognize the machine.

kimker said:
I saw that someone’s edge s had unlocked the BL and Flash G100 firmware and everything worked normally, and then tried to lock the BL again, but it was unsuccessful and the system could not start. The flashing tool does not recognize the machine.
Click to expand...
Click to collapse
That's not good. Hopefully they can restore it back somehow. With this guide to unlock and flash gapps why would you need to flash G100 though? This seems to be itright now without one of rom developer's releases to get root & apps. For me this is all i would look for. Titanium backup on it and restore.. done until PE rom comes out.

kimker said:
I saw that someone’s edge s had unlocked the BL and Flash G100 firmware and everything worked normally, and then tried to lock the BL again, but it was unsuccessful and the system could not start. The flashing tool does not recognize the machine.
Click to expand...
Click to collapse
I would think yes, if you flash different firmware, locking the BL would likely cause problems. It's very difficult to do anything w/o unlocked bootloader, except sometimes rooting is doable. That's pretty much the behavior I expect. If they come to this subforum, we might be able to help.

HopelesRomantc91 said:
I would think yes, if you flash different firmware, locking the BL would likely cause problems. It's very difficult to do anything w/o unlocked bootloader, except sometimes rooting is doable. That's pretty much the behavior I expect. If they come to this subforum, we might be able to help.
Click to expand...
Click to collapse
thank you. They did not ask for help. It seems that the lock BL is a self-verification switch, and then performs a verification system integrity.

HopelesRomantc91 said:
I would think yes, if you flash different firmware, locking the BL would likely cause problems. It's very difficult to do anything w/o unlocked bootloader, except sometimes rooting is doable. That's pretty much the behavior I expect. If they come to this subforum, we might be able to help.
Click to expand...
Click to collapse
I'm curious,If you unlock and flash other firmware and then flash back to the original firmware, can it be locked again?

Mine doesn't let me unlock its BL. I've got unlock code from moto and did a factory reset with SIM card in slot 1. After enabling developer mode and debugging the switch still is greyed out. So no chance to unlock it.
Has anyone got an idea what to try now?
Moto support answered yesterday to my request but also no solution since I told them that it doesn't work
Device is not branded. I got it from Amazon so no provider branding.
If this won't be able to be unlocked and rooted I'll have to return it and switch to a Google Pixel.

kischde said:
Mine doesn't let me unlock its BL. I've got unlock code from moto and did a factory reset with SIM card in slot 1. After enabling developer mode and debugging the switch still is greyed out. So no chance to unlock it.
Has anyone got an idea what to try now?
Moto support answered yesterday to my request but also no solution since I told them that it doesn't work
Device is not branded. I got it from Amazon so no provider branding.
If this won't be able to be unlocked and rooted I'll have to return it and switch to a Google Pixel.
Click to expand...
Click to collapse
I had the same issue, you need to factory reset WITH your sim card in the phone, this will let you open the OEM unlock slide thing in the dev mode.
Then once its done you can fastboot and unlock the bootloader.

I did so, maybe I explained not so well. SIM was inserted and then I did factory reset by starting it from settings. After restart it's still the same - switch / unlock slider greyed out.

kischde said:
I did so, maybe I explained not so well. SIM was inserted and then I did factory reset by starting it from settings. After restart it's still the same - switch / unlock slider greyed out.
Click to expand...
Click to collapse
On my OG Pixel XL, I had to wait 7 days for the slider to become normal. By the time I got around to do it on the Edge S it was about the same time.... could be related

Now as you said that I remember that thingy with another device. Maybe a Xiaomi I think... With that I had to wait several days until the unlock code was delivered.
But there was a message, too, when trying to get it sooner, which said you needed to wait some more time.
Not sure if it's the the same for Moto devices? Then again, when thinking that you experienced the same with a Pixel, too...
Did anyone else make such an experience with his/her g100?

kischde said:
Now as you said that I remember that thingy with another device. Maybe a Xiaomi I think... With that I had to wait several days until the unlock code was delivered.
But there was a message, too, when trying to get it sooner, which said you needed to wait some more time.
Not sure if it's the the same for Moto devices? Then again, when thinking that you experienced the same with a Pixel, too...
Did anyone else make such an experience with his/her g100?
Click to expand...
Click to collapse
Make sure your on the latest OTA, Lenovo made a mistake on previous versions with the OEM Unlocking function not being enabled. They fixed it in latest ota.

RSA tool said the file I uploaded yesterday is the latest one available (and it's exactly the same as the installed version).
The device was released just a few days ago in Europe. Perhaps they fixed the unlock switch in other regions and still need to fix it in Europe..
Will wait until weekend if they come up with a solution. If not I'm afraid I have to return the device as I need it personally AND professionally, too - I'm field agent, so.... :/

HopelesRomantc91 said:
I would think yes, if you flash different firmware, locking the BL would likely cause problems. It's very difficult to do anything w/o unlocked bootloader, except sometimes rooting is doable. That's pretty much the behavior I expect. If they come to this subforum, we might be able to help.
Click to expand...
Click to collapse
The poor guy whose phone turned bricks went to the after-sales department of moto, and the answer was that he needed to replace the phone motherboard. .

kimker said:
The poor guy whose phone turned bricks went to the after-sales department of moto, and the answer was that he needed to replace the phone motherboard. .
Click to expand...
Click to collapse
Ouch...

kimker said:
I'm curious,If you unlock and flash other firmware and then flash back to the original firmware, can it be locked again?
Click to expand...
Click to collapse
I would assume so, but I don't really know why anyone would want to relock.

Question TMobile OP9 bootloader unlock process stuck

Hello,
I am trying to convert Tmobile OP9 to Global version and I am stuck at a basic step of getting the oem unlock code when trying to unlock the bootloader.
Details:
1. got my network unlocked from mobbdeep couple of weeks back.
2. Under Settings > "Network Unlock" status shows as unlocked
3. Installed the latest SDK as I am following the guide here to get the bootloader unlocked. When I boot in fastmode and run the oem command it stays at "waiting for device" and returns nothing.
Code:
fastboot oem get_unlock_code
When I run this, device list shows empty
Code:
adb devices
- Enabled USB debugging and stay awake options is checked from what I read on few posts
- When I restart the phone normally and then run "adb devices" it shows my phone listed
- Working on windows machine
What am I doing wrong here ?
TIA !!
PS: attached image shows the device state as Locked

If your phone is SIM unlocked, follow the instructions to convert from T-Mo to global.
Then you'll have the normal OEM unlock in dev options. Then you can just do the fastboot oem unlock and call it good.
Much easier and you don't have to deal with the token. It worked well for me.

I have the global version, not TMobile, so this might not apply
But I had a similar issue with fastboot not recognizing my device, the solution is disabling driver signing in windows and manually updating the driver in device manager
Check the "root OnePlus9" thread.. on page 8 at the bottom there's a guide on how to do it

Superguy said:
If your phone is SIM unlocked, follow the instructions to convert from T-Mo to global.
Then you'll have the normal OEM unlock in dev options. Then you can just do the fastboot oem unlock and call it good.
Much easier and you don't have to deal with the token. It worked well for me.
Click to expand...
Click to collapse
Thanks for your response.
I tried that earlier assuming the same but it asked me to first flash the unlock token for which I am following the steps
I was however able to get the device listed after manually uninstalling/installing adb drivers

avid_droid said:
Check in device manager. If you have the yellow triangle on your phone in device manager just download android composite driver and update it through device manager/browse computer/ select unzipped folder and click OK.
Might be the issue
Click to expand...
Click to collapse
That was indeed the issue. I manually uninstalled and installed the drivers which helped and I can now see the device listed and also got the oem unlock code successfully.
I have submitted the form with Tmobile for the unlock token, hopefully that should do it.
Thanks !

This thread was helpful as well. Thanks !

cass89 said:
I have the global version, not TMobile, so this might not apply
But I had a similar issue with fastboot not recognizing my device, the solution is disabling driver signing in windows and manually updating the driver in device manager
Check the "root OnePlus9" thread.. on page 8 at the bottom there's a guide on how to do it
Click to expand...
Click to collapse
This thread was helpful as well. Thanks !

avid_droid said:
If going for root and conversion,don't forget to use partitions manager to back up persist.img and modemst1,modemst2.
Can't stress that enough. This is my second oneplus device messed up in a 3 week time period
Click to expand...
Click to collapse
I will definitely.
I remember doing the same process for OP6T. Some users had mentioned about the issues surfacing and that helped o go back to stock
That reminds, like 6T are there any known issues post converting ?
I remember play services weren't functioning fine as well as there was no google pay. My corporate apps also didnt install due to missing security certificates.
Same applies for OP9 as well ?

FRNK8 said:
I will definitely.
I remember doing the same process for OP6T. Some users had mentioned about the issues surfacing and that helped o go back to stock
That reminds, like 6T are there any known issues post converting ?
I remember play services weren't functioning fine as well as there was no google pay. My corporate apps also didnt install due to missing security certificates.
Same applies for OP9 as well ?
Click to expand...
Click to collapse
You might want to backup your modem partition just in case you want to try the T-Mobile modem. I've heard reports the the AA modem works great, and also that the AA modem sucks, so YMMV

craznazn said:
You might want to backup your modem partition just in case you want to try the T-Mobile modem. I've heard reports the the AA modem works great, and also that the AA modem sucks, so YMMV
Click to expand...
Click to collapse
Hey thanks for the heads up. I will
Would infact first go through the conversion steps to go back to Tmo just incase things go south.

avid_droid said:
If going for root and conversion,don't forget to use partitions manager to back up persist.img and modemst1,modemst2.
Can't stress that enough. This is my second oneplus device messed up in a 3 week time period
Click to expand...
Click to collapse
craznazn said:
You might want to backup your modem partition just in case you want to try the T-Mobile modem. I've heard reports the the AA modem works great, and also that the AA modem sucks, so YMMV
Click to expand...
Click to collapse
Following the guide here, I just performed the bootloader unlock successfully. Per your suggestion, I want to backup the modem files before I proceed any further.
I cant seem to recollect how do I backup the modem files when I did the same conversion for OP6T. Can you please guide me here before I proceed with the next steps.
I tried installing the partitions backup but it wont allow me without root. I vaguely remember that I hadn't rooted my device the last time while backing up these files or is root needed ?
TIA !

You need to root. Rooting is fine and won't affect your modem. While you are there, back up persist, modemst1, modemst2, modem_a, and modem_b. _a and _b should be different versions and you can pick and choose which one you might want to use (or stick with AA)

craznazn said:
You need to root. Rooting is fine and won't affect your modem. While you are there, back up persist, modemst1, modemst2, modem_a, and modem_b. _a and _b should be different versions and you can pick and choose which one you might want to use (or stick with AA)
Click to expand...
Click to collapse
Can you help me with the steps to root ? Just want to be careful while doing so.
I saw some posts but that was related to the Tmobile OP9Pro(in my case its its Tmo Op9). The boot images were different so I didnt try to play around.
Thanks !

Just try to fastboot boot a magisk patched img and see if it works.
Try https://forum.xda-developers.com/t/root-oneplus-9.4253651/
Don't flash anything, just go to fastboot
Code:
fastboot boot patched_boot.img

craznazn said:
Just try to fastboot boot a magisk patched img and see if it works.
Try https://forum.xda-developers.com/t/root-oneplus-9.4253651/
Don't flash anything, just go to fastboot
Code:
fastboot boot patched_boot.img
Click to expand...
Click to collapse
Okay did this step.
Downloaded an copied stock image and the boot_patched image provided on the link and copied to my phones internal storage
Also as next step said, rebooted the phone
- went to Magisk app > install > selected boot_patched.img from internal storage
- phone restarted
- When I open the partitions backup app it still shows "device is not rooted" warning
What step did I miss ?

FRNK8 said:
That was indeed the issue. I manually uninstalled and installed the drivers which helped and I can now see the device listed and also got the oem unlock code successfully.
I have submitted the form with Tmobile for the unlock token, hopefully that should do it.
Thanks !
Click to expand...
Click to collapse
do you have a link for the driver I'm having the same problem

How To Guide WARNING: Read BEFORE Locking Bootloader

DO NOT LOCK THE BOOTLOADER WHILE ROOTED!
When locking the bootloader while rooted, the boot image will fail verification and the system will fail to boot. You cannot flash a stock boot image with a locked bootloader.
Locking the bootloader will not fix most issues. It will allow you to use apps that check for an unlocked bootloader without the need for any additional modification. That is the ONLY benefit.
If you still want to lock your bootloader, make sure you can say yes to each of the following:
1. Have you restored the stock boot.img / vendor_boot.img and the phone functions normally?
Spoiler: Restore Stock Boot
Boot / DTBO Images [Root / Stock] - 5 / Pro / Ultimate (NOT S)
These images are NOT built from source. These are the stock images from the firmware provided by Asus that are extracted with payload dumper and uploaded without modification. 18.0840.2202.231 18.0840.2201.226 18.0840.2112.211...
forum.xda-developers.com
Follow the instructions in the thread above.
Use only the boot and vendor_boot images.
Do NOT flash any images that end with "-magisk.img"
2. Have you made a backup of everything you do not want to lose when wiping the phone?
Spoiler: Make a Backup
The sdcard is part of the internal storage and is cleared by a factory reset
Copy everything you want to keep to a computer or USB-C storage device
Apps and settings can be backed up by enabling the Google Backup option
Open Settings
Select Google
Select Backup
Select Back up now
Wait for the backup to complete
3. Have you flashed raw firmware and made sure the phone and updates function normally?
Spoiler: Flash Raw Firmware
RAW Firmware Collection and Guide
All fastboot / adb commands require using the side USB-C port https://developer.android.com/studio/releases/platform-tools.html#download Make sure you have fastboot installed Add platform tools to PATH (post 2) Make a backup of anything...
forum.xda-developers.com
Follow the instructions in the thread above.
If you perform a wipe, you may skip step 4.
4. Have you performed a factory reset and made sure the phone functions normally?
Spoiler: Factory Reset
Open Settings
Select System
Select Reset options
Select Erase all data (factory reset)
Follow the instructions
Once you have verified all of the above requirements, you are now ready to lock the bootloader.
Spoiler: Lock Bootloader
From the bootloader (volume up + power):
Code:
fastboot oem asus-csc_lk

Reserved for QA information

I don't want to spread false information here, but here is a question post I created recently with two replies showing me contacting the help center (two different agents) confirming that I can use the app more than once to unlock the device's bootloader: https://forum.xda-developers.com/t/...nlock-relock-for-asus-rog-phone-5-5s.4367047/ . @Andrologic also confirms the case there for global (EU) version. I have a feeling that for the Tencent version it is because the sellers lock it on a wrong official ROM, or wrong ROM in general, e.g. global ROM, and therefore it confuses the unlock app. I am surprised the device did not even get hard bricked from locking on not the original ROM. By the way, I have contacted the help center of the US store, but I have a feeling it should work on the global (EU) version as well.

falhumai96 said:
I don't want to spread false information here, but here is a question post I created recently with two replies showing me contacting the help center (two different agents) confirming that I can use the app more than once to unlock the device's bootloader: https://forum.xda-developers.com/t/...nlock-relock-for-asus-rog-phone-5-5s.4367047/ . @Andrologic also confirms the case there for global (EU) version. I have a feeling that for the Tencent version it is because the sellers lock it on a wrong official ROM, or wrong ROM in general, e.g. global ROM, and therefore it confuses the unlock app. I am surprised the device did not even get hard bricked from locking on not the original ROM. By the way, I have contacted the help center of the US store, but I have a feeling it should work on the global (EU) version as well.
Click to expand...
Click to collapse
Based on new information, it does seem possible to repair the issues caused by converting.
That said, this guide is still quite relevant. After all, most of the issues people were having were caused by unlocking the bootloader, converting, rooting, and locking the bootloader. The warning for possibility of not being able to unlock have been removed, but the info about restoring to stock before locking has been left.

I send mine in for a motherboard repair I was rooted and everything I unrooted installed stock firmware and locked the bootloader again once I got the phone back I unlocked the bootloader once again and I am rooted again

chairman011 said:
I send mine in for a motherboard repair I was rooted and everything I unrooted installed stock firmware and locked the bootloader again once I got the phone back I unlocked the bootloader once again and I am rooted again
Click to expand...
Click to collapse
@chairman011 what variant of the phone it is (e.g. CN or WW or US, ...etc.)? Also, when they returned it to you and you were able to unlock it again, was it on the original firmware (or any version in its lineage (i.e. not a ROM that's not original))?

If by using ASUS unlock utility one was able to oneself unlock the boot-loader once, then is it safe to say that (after relocking it) it'd be possible to unlock it again?

nexusnerdgeek said:
If by using ASUS unlock utility one was able to oneself unlock the boot-loader once, then is it safe to say that (after relocking it) it'd be possible to unlock it again?
Click to expand...
Click to collapse
Some people have reported that you can't unlock the bootloader again after relocking, using the official "Unlock Device App", but I suspect it is an OS mismatch. This issue has only been observed on Tencent (CN) version with global ROM. Have anyone been able to unlock->relock->unlock on the same version of the phone, but not relocking while on the global ROM (i.e. relocking while on stock CN ROM)?
I am surprised the phone did not hard brick. Usually, and this is a general case in almost all Android phones with bootloader unlock capability, when you relock on a different ROM your phone hard bricks. Always restore to original ROM before relocking. Can people with Tencent (CN) phones with global ROM and locked bootloader flash the original CN ROM without unlocking the bootloader? If so, can you test the "Unlock Device App" to see if it works while on the CN (official) ROM? I gotta a feeling it might work in that situation.

falhumai96 said:
Some people have reported that you can't unlock the bootloader again after relocking, using the official "Unlock Device App", but I suspect it is an OS mismatch. This issue has only been observed on Tencent (CN) version with global ROM. Have anyone been able to unlock->relock->unlock on the same version of the phone, but not relocking while on the global ROM (i.e. relocking while on stock CN ROM)?
I am surprised the phone did not hard brick. Usually, and this is a general case in almost all Android phones with bootloader unlock capability, when you relock on a different ROM your phone hard bricks. Always restore to original ROM before relocking. Can people with Tencent (CN) phones with global ROM and locked bootloader flash the original CN ROM without unlocking the bootloader? If so, can you test the "Unlock Device App" to see if it works while on the CN (official) ROM? I gotta a feeling it might work in that situation.
Click to expand...
Click to collapse
It's an identification mismatch. It's similar to when you throw your SIM card in a different phone and your carrier lists you as having a different phone. Based on the information that has been discovered, it would appear that CN to WW conversions were wiping out the stuff that makes your device your device.

twistedumbrella said:
It's an identification mismatch. It's similar to when you throw your SIM card in a different phone and your carrier lists you as having a different phone. Based on the information that has been discovered, it would appear that CN to WW conversions were wiping out the stuff that makes your device your device.
Click to expand...
Click to collapse
So, basically the bootloader unlock for tencent devices will always locked unless asus uodate their unlock app or has their been another way around it yet?

The unlock app should unlock the bootloader at least once. Unlocking it a second time has mixed results.

Hi there, can you guys help me? I'm one of those unlucky ones who got my phone corrupted and won't boot anymore due to the boot loader. is there a way to fix this?? I've got an ROG phone 5s 16/512 on android12.
Hope you guys can help me! I know you guys have amazing brain cells than me when it comes to these things lol
Oh! and my rog is not the china version thanks

0v3rkill said:
Hi there, can you guys help me? I'm one of those unlucky ones who got my phone corrupted and won't boot anymore due to the boot loader. is there a way to fix this?? I've got an ROG phone 5s 16/512 on android12.
Hope you guys can help me! I know you guys have amazing brain cells than me when it comes to these things lol
Oh! and my rog is not the china version thanks
Click to expand...
Click to collapse
TYou should be able to RAW flash yourself out of it if a factory reset doesn't work. This does happen when re-locking the WW.

Andrologic said:
TYou should be able to RAW flash yourself out of it if a factory reset doesn't work. This does happen when re-locking the WW.
Click to expand...
Click to collapse
Hi there mate, thanks heaps for taking time.on my post. how do i do that? can you send me a link of the step by step guide? again thanks

0v3rkill said:
Hi there mate, thanks heaps for taking time.on my post. how do i do that? can you send me a link of the step by step guide? again thanks
Click to expand...
Click to collapse
Below post from the help guide (credits to the contributors) has links to RAW firmware packages. You just need any one of the WW packages. Download it and with your device in bootloader mode, run one of the .bat flash scripts that you'll find in the RAW package. The version doesn't matter, you can simply update to the latest firmware once you're back up.
RAW Firmware Collection and Guide
All fastboot / adb commands require using the side USB-C port https://developer.android.com/studio/releases/platform-tools.html#download Make sure you have fastboot installed Add platform tools to PATH (post 2) Make a backup of anything...
forum.xda-developers.com

Andrologic said:
Below post from the help guide (credits to the contributors) has links to RAW firmware packages. You just need any one of the WW packages. Download it and with your device in bootloader mode, run one of the .bat flash scripts that you'll find in the RAW package. The version doesn't matter, you can simply update to the latest firmware once you're back up.
RAW Firmware Collection and Guide
All fastboot / adb commands require using the side USB-C port https://developer.android.com/studio/releases/platform-tools.html#download Make sure you have fastboot installed Add platform tools to PATH (post 2) Make a backup of anything...
forum.xda-developers.com
Click to expand...
Click to collapse
Hi there, I did follow and did the raw setup it did got me through the boot loop. However, its stuck on the system start up updating screen and stays in 0%.

Darn i thought im already dead! i didn't even know how i fixed it hahahaha! but its working now successfully downgraded to android 11 because its the only firmware i found and managed to make it work again combination of alot of research in google and here xda. working 100% imei two of them, finger print and sn are all intact. thanks guys

For these few reasons I have to give up root & lock the boot-loader: 1. Financial apps stop working from time to time causing much grief; 2. I've used root functionality precisely for nothing for a year I've had it; 3. It was getting all too complicated to keep up with it all.
(The original intention for unlocking/rooting was to get some sort of unofficial VoLTE and VoWiFi for the mobile operator of my choice; however, it didn't help. Then a newer firmware implemented VoLTE and VoWiFi! So my impatience, admittedly couldn't be known at that point in time, backfired.)
I've nothing to preserve on the phone, due to having a Moto G 5G backup phone. I only had it working with adb & fastboot in my Linux laptop (up to date Fedora 36). I had no working Windows laptop then. But I do now. However, adb on Windows says the device is "unauthorised" (as expected); fastboot in it doesn't list the device. So I might be limited to my Linux laptop only. The phone was previously working on the last A11 WW firmware fine.
I've tried to follow the steps from the original post of this thread. First one worked with vendor_boot, dtbo & boot images (used only 18.0840.2202.231 versions of them). Second N/A. With third step, flash_raw_and_wipe_data.sh fails by core dumping.
Right now, the phone boots to fastbootd & not further. Any help is much appreciated.
(I think I'm inching towards fully bricking this phone. I'm not there yet, but getting closer . It'd be nice to get it working again without root & with locked boot loader. Any help is much appreciated.)

This is where I'm at while executing step 3 of the initial guide in this post:
When powered on, in the usual boot loader unlocked warning page, it prompts for power key to be pressed to continue.
(Here if power switch is not pressed within 30 odd seconds, phone powers down automatically.)
Once power key is pressed, it lands in boot loader. Selecting Start, it goes back to boot loader. I think this is called a boot loop.
While in boot loader, selecting "Recovery mode", it progresses to "Android Recovery". Here selecting "Enter fastboot" appears to take it furthest in the booting process of landing at "Android Fastboot".
(The version info showed in Fastboot -- 18.0840.2202.231-0 -- matches with the last A11 update I downloaded from Asus website & had it installed late March this year.)
I don't think it can boot any further at the state that it's in now.
I think this is where it needs a raw firmware to be flashed. This step keeps core-dumping in my Linux laptop when trying to use WW_ZS673KS_18.0840.2106.83_M3.13.24.40-ASUS_1.1.92_Phone-user.raw file that was linked in the original post. This version appears to be quite old. Could the version mismatch between what the phone was running recently (18.0840.2202.231) and the raw file (18.0840.2106.83) cause the core-dump issue? IOW, would somebody have a link for 18.0840.2202.231 raw file please?
I couldn't use my work Windows laptop due to an issue I cannot overcome (installation of driver needed for the phone is somehow blocked in it). So, soon I'll try it from a personal Windows laptop of my neighbor. Let's see if it can progress any further with the help of Windows platform.
In the meantime, I can appreciate to be informed about any tips and tricks such as if this is something that the phone cannot be recovered from. Or even somebody highly skilled would like to help me to achieve a fully functional phone (with bootloader locked please) for a fair compensation. Please let me know. Thanks for any guidance.

nexusnerdgeek said:
This is where I'm at while executing step 3 of the initial guide in this post:
When powered on, in the usual boot loader unlocked warning page, it prompts for power key to be pressed to continue.
(Here if power switch is not pressed within 30 odd seconds, phone powers down automatically.)
Once power key is pressed, it lands in boot loader. Selecting Start, it goes back to boot loader. I think this is called a boot loop.
While in boot loader, selecting "Recovery mode", it progresses to "Android Recovery". Here selecting "Enter fastboot" appears to take it furthest in the booting process of landing at "Android Fastboot".
(The version info showed in Fastboot -- 18.0840.2202.231-0 -- matches with the last A11 update I downloaded from Asus website & had it installed late March this year.)
I don't think it can boot any further at the state that it's in now.
I think this is where it needs a raw firmware to be flashed. This step keeps core-dumping in my Linux laptop when trying to use WW_ZS673KS_18.0840.2106.83_M3.13.24.40-ASUS_1.1.92_Phone-user.raw file that was linked in the original post. This version appears to be quite old. Could the version mismatch between what the phone was running recently (18.0840.2202.231) and the raw file (18.0840.2106.83) cause the core-dump issue? IOW, would somebody have a link for 18.0840.2202.231 raw file please?
I couldn't use my work Windows laptop due to an issue I cannot overcome (installation of driver needed for the phone is somehow blocked in it). So, soon I'll try it from a personal Windows laptop of my neighbor. Let's see if it can progress any further with the help of Windows platform.
In the meantime, I can appreciate to be informed about any tips and tricks such as if this is something that the phone cannot be recovered from. Or even somebody highly skilled would like to help me to achieve a fully functional phone (with bootloader locked please) for a fair compensation. Please let me know. Thanks for any guidance.
Click to expand...
Click to collapse
Confirm that you can send fastboot commands to the device. It's a prerequisite for flashing the original boot img back or doing a RAW flash if boot looped. That's the very first step you need sorted and confirmed. Sounds like you may not be in the right Fastboot mode. The RAW version doesn't matter too much as long as it's in line with your device version, you just need it to get back up and can upgrade normally to other versions.

Question I have a samsung galaxy A13 can anyone tell me how to begin rooting after developer mode is unlocked and USB debugging in activated never used debug?

I just wanna learn how to begin the rooting don't know what driver how to get a sdk what app nothing?

I'm looking at the A13 as well since the GS5 is now blocked by AT&T.

I just spoke to Samsung, and they told me the A13 G5 unlocked version purchased directly from them comes with an unlocked bootloader.
I think I just wet myself.

MaddogK said:
I just spoke to Samsung, and they told me the A13 G5 unlocked version purchased directly from them comes with an unlocked bootloader.
I think I just wet myself.
Click to expand...
Click to collapse
What about flashable firmware?

Rularick5 said:
What about flashable firmware?
Click to expand...
Click to collapse
I don't think there's any yet, it's only been on the market for a few months. Aside from it's size it's pretty nice, I've had it 2 weeks and love the battery life.

MaddogK said:
I just spoke to Samsung, and they told me the A13 G5 unlocked version purchased directly from them comes with an unlocked bootloader.
I think I just wet myself.
Click to expand...
Click to collapse
This one dosnt

Samfirm should have the version of android you need for you're phone you need the Samsung flash tool su+twrp+magisk is optional good luck! Ps.always back up everything

I will be working on mine purchased from Metro PCS. Its OEM bootloader is locked at the moment. I will be using Magisk and flashing a TWRP. Utilizing an ADB wireless USB connection from PC. I will keep you posted if someone else doesnt beat me too it. Either way this thread is going so im sure together we can knock this out. Im going to do my LG Stylo 4 firsy. Its OEM came unlocked from Metro PCS...so i scored. Just havent had time. I just did my ZTE ZMax Pro Z981 from Metro PCS...it also was unlocked OEM. They will all need a PC usb connection and Magisck. You can find them in threads here. Good luck. Will post again when i get time. Hope this helps a little. Here you might not get an answer you want...but if you dig youll find what youre looking for...just got learn by doing...like they said...always backup... everything...first...dont forget to remove sd before you factory reset or you will wipe it. And your phone. If youre not sure...dont change things you dont know...you will brick your phone. Follow directions you find in threads...and you will be fine. I learned how to be a great chef from other chefs who told me the ingredients but never amounts of ingredients. Thats how you become a great chef and also become great developer...good luck guys. Im learning too. Share what you learn. FYI...the one click....dont bother...IJS...PC you will need for this....

GeekNout23 said:
I will be working on mine purchased from Metro PCS. Its OEM bootloader is locked at the moment. I will be using Magisk and flashing a TWRP.
Click to expand...
Click to collapse
How do you plan on flashing those if the bootloader is locked.....?

Sorry to break it to you, but it's a Samsung thing. It doesn't matter if it's a device from a carrier or carrier-free directly from Samsung, if you buy a U.S. Samsung phone you will not unlock bootloader freely.

ShaDisNX255 said:
Sorry to break it to you, but it's a Samsung thing. It doesn't matter if it's a device from a carrier or carrier-free directly from Samsung, if you buy a U.S. Samsung phone you will not unlock bootloader freely.
Click to expand...
Click to collapse
Correct

first you need oem unlock on that takes pluging in phone holding volume+/- (both) and power till it shutdown and restarts with the unlock option in recovery

Just bought this but the 5G version

Hi, I just rooted my Samsung Galaxy A13. Here's a quick tutorial of what worked for me:
Prerequisites:
Install Heimdall onto your computer. I used Manjaro Linux as my OS, and haven't tested anything else. Install any drivers if necessary.
Install Magisk onto your phone. I recommend using the F-Droid store/app, or Magisk's GitHub page.
Steps
Install any updates for your phone.
Unlock Bootloader
First of all you need to unlock the bootloader:
Enable Developer Mode by navigating: Settings > About Phone > Software information.
Tap Build number about 7 or 8 times until it says You're now a developer.
Allowing the bootloader to be unlocked:
Settings > Developer Options > Enable OEM unlocking.
Allow it to be enabled if prompted.
Turn off your device.
Turn on Download Mode by holding down Volume Up and Volume Down.
When you see a blue screen, hold Volume Up until it shows Unlock Bootloader screen.
Press Volume Up to confirm.
Flashing firmware
https://samfw.com/ is a good resource for downloading firmware. Be careful that you're downloading the correct firmware though. You can find information by navigating on your phone:
Settings > About Phone, and Settings > About Phone > Software information. If you call *#1234# it will show you the current firmware.
Extract the archive.
Extract the file staring with AP.
Extract the file boot.img.IZ4.
Move boot.img onto your phone.
Open Magisk. Click install. Locate and patch the file. Move the file back onto your computers.
Extract the file starting with CSC. Locate the pit file.
Open Heimdall.
Choose the pit file and the patched boot image.
Put your phone in Download Mode and connect via USB.
Flash your phone.
If it worked successfully, your phone will reboot. It will probably throw an error before starting. Choose to do a factory reset. This will delete all the user data, but the patched boot file will stay in place.
Download Magisk again. Follow the prompts.
To test if you have super user access, install Termux from the F-Droid store. type su into the terminal. You will get a pop up asking if you want to give super user permissions.
Congratulations! You're now the UNIX sysadmin of your own phone!

hello Everyone, a friend of mine from America bought an A13 5G, now we are in Europe and the phone is blocked.
exactly inserting a European sim says:
Phone locked. Please contact our customer service center to unlock your phone.
i tried to unlocked bootloader, but unfortunately i don't have OEM unlock present, no way i get it out!
there is a complicated procedure with Flashing a Combination Firmware, but it looks difficult!!! I haven't done it yet.
but would it be possible to only unlock the phone to use European sims?
many thanks
K

krellz said:
hello Everyone, a friend of mine from America bought an A13 5G, now we are in Europe and the phone is blocked.
exactly inserting a European sim says:
Phone locked. Please contact our customer service center to unlock your phone.
i tried to unlocked bootloader, but unfortunately i don't have OEM unlock present, no way i get it out!
there is a complicated procedure with Flashing a Combination Firmware, but it looks difficult!!! I haven't done it yet.
but would it be possible to only unlock the phone to use European sims?
many thanks
K
Click to expand...
Click to collapse
Unlocking the bootloader would not do anything for you in regards to network unlocking. Those are 2 totally separate and distinct procedures.
What's the Baseband Version on the device? You can find that under Settings-->About-->Software Information (and don't do any software updates to the device if it prompts you to)

Hello, the first thing would be to unlock the bootloader which is very easy in Samsung terminals, In all Samsung is the same, you can see the following video that I recommend. No PC needed, The video is in Spanish but it is only to follow the same steps:
The second thing would be to get root, the easiest would be with Magisk, I recommend you watch this video since it is not necessary to format the cell phone, the video is also in Spanish, but you still follow the same steps. In this case, a PC is necessary:
Soon I will make a post myself, teaching you how to root without losing data, the same way as in the video, in case you didn't understand the video.

There is no boot.img.IZ4 im my ap file

ok i found the boot.img I extracted the ap file with winrar before. some how it does not see the .img files but untarring on linux worked. i managed to re flash the ap fille with odin and i saw lot of .img files being flashed and the extracted foldersize by winrar was way smaler than the archive. so that made me look at the ap file and i got the boot.img patched by magisk and made an lz4 file out of it how do i get that boot.img.lz4 back in the archive?
also whats wrong with fast boot?
"fastboot devices" lists my device when its connected but like many here post it does not work with other commands it failes like thIs :
fastboot flash bootloader b.img
Sending 'bootloader' (32768 KB) FAILED (remote: 'unknown command')
fastboot: error: Command failed
Tried other examples too but nothing works tried the fastboot included in android studio and one of the minimal adb/fastboot. the boot loader is unlocked (Not using fastboot) and odin works fine. my phone is in the "entertering fastboor mode" state .its a samsung galaxy a13 g5 and i flashed this firmware using odin
AP_A136BXXS2BWA1_A136BXXS2BWA1_MQB61124574_REV00_user_low_ship_MULTI_CERT_meta_OS13 now its stock again with no accounts.
fastboot reboot does work so some is right.
fastboot reboot
Rebooting OKAY [ 0.001s]
Finished. Total time: 0.005s
i hope some one can point me in the right direction.
thx

Hans de Groot said:
i hope some one can point me in the right direction.
thx
Click to expand...
Click to collapse
Fastboot isn't functional on Samsung devices. Samsung replaces it with Download mode. Therefore, all flashing is done via Download mode using Odin, not via fastboot mode using command terminal