Related
Hi,
I was a keen follower of the Cyanogen Nightlys. But after build 38 when my phone was idle for more the 10-20 mins, my phone display went blank and none of the buttons worked. So the only way to fix this was to reset the device by taking out the battery.
So I went back to build build 38 and restored my device with Titanium BackUp. Same thing happened (blank screen, buttons didn't work) after awhile. Then I just put build 38 with no backup, worked for awhile but after I installed an application (Whatsapp) and restored my contacts from Google, after 15 mins the screen went blank again.
So i ended up getting frustrated and decided to wipe everything (including the sd card) and put cyanogen fresh. So I plugged in my Nexus S to the computer and did a normal (FAT 32, default allocation) format. Windows then said sd card was empty but once I unplugged and checked the sd card, everything was still there. Plugged it back to the pc and and everything was still there.
Then I tried using the format storage option in settings--> storage itself, same thing happened, it said it was formatted but nothing changed on the sd card. Even tried formatting using clockwork recovery, same thing.
What makes things worse is that now every time i place something on the sd card, windows says its there, but it disappears once i unplug it. So it seems that the storage doesn't want to change anything on itself. So since the last ROM i put before the format was a fresh update of cyanogen build 38, every time i reboot my phone it runs setup wizard (asks for my google access details). And freezes every so often.
Please help, i have no idea what else to try. I was gonna used odin, but I need to buy/make the cable. So is it really necessary?
EDIT: Every time i install a new rom eg. MIUI, it says it has been installed in recovery, but cyanogen loads when i reset the phone
EDIT: I tried ODIN, it didnt worked, now it just gets stuck on the google screen. I can still enter recovery and the bootloader. But the sd card seems to be corrupt.
legojj said:
I was gonna used odin, but I need to buy/make the cable. So is it really necessary?
Click to expand...
Click to collapse
What cable? Admittedly, I've not used Odin on the Nexus S, however i've used it plenty on the Galaxy S i had previously, all i ever used was the standard USB cable that came with the phone.
I thought u needed a special cable? I really dont want to use odin cause i hear people bricked there phones using it. I hae the i9020
I don't know that I would have use windows to format the card. I would have done the oem lock and oem unlock to clear the sdcard storage. Doing the oem unlock again totally clears the phone and then you should be starting all over from scratch like day one when you purchased the phone.
jerrycycle said:
I don't know that I would have use windows to format the card. I would have done the oem lock and oem unlock to clear the sdcard storage. Doing the oem unlock again totally clears the phone and then you should be starting all over from scratch like day one when you purchased the phone.
Click to expand...
Click to collapse
I tried " fastboot oem lock" and fastboot oem unlock" but everything stayed the same. And yes i agree, using windows was stupid, I really wasn't thinking properly.
Ok so does the option, setting*storage*erase sd card work?
jerrycycle said:
Ok so does the option, setting*storage*erase sd card work?
Click to expand...
Click to collapse
No it didn't, it says its formatted. But when i check back on the file explorer, everything is there...
Could the problem be that i choose FAT32 as the file system when formatting using windows?
Like most of the users here, my phone has been buttery smooth and fast for awhile thanks to our amazing devs. Today, something unexpected happened. I was attempting to get a screenshot of the lockscreen. I think I was successful, but when I checked the gallery, everything had corrupted icons on them. Ok, I will just reboot. Reboot, and I hear Linda speaking to me. I didn't catch it, but I know it had something to do with the SD card. 5 minutes later, my phone boots up and my card is nowhere to be found. I figure the whole card somehow got corrupted.
Now I originally started typing this because it looked like my phone wasn't going to boot past the galaxy S 4g logo, but after about 5 minutes it did. Now with the phone booted, my phone can't see the card at all. The only thing that comes up is the option to mount, but that doesn't work at all anymore. The previous time I restarted it before it hung at the boot logo, it showed up in my computer and opened to nothing and ended up freezing the computer for a second until I shut it down.
I need to format this card obviously, but can't see how I am going to do that if it isn't recognized. On top of that, I might as well use this as an excuse to reflash a new rom, but I have even more problems. None of my button combos work to get into recovery or download at all. I then figured I would use terminal emulator to get into it, as that has worked before, but the app won't install due to an "invalid package file" or something like that. I appear to be stuck in a very weird soft brick, and need some help.
Might have made some progress. I removed the sd card and installed terminal emulator on the phone. Hopefully it is going to reboot into recovery, but it is stuck at the boot screen again. Ill see in a few minutes if it makes it there. From there I can start trying to restore/wipe/format/etc...
Was able to get into recovery. Did a factory reset and wiped everything. Looks like it is still going to take more than 5 minutes to get past that boot screen though. Has anyone ever had this problem? Could my card be done for good? Unless I can find a way for my computer to recognize it, I don't know how I will format it.
I have seen them do this and in the end the card needed to be replaced. I haven't been able to figure out if it was the phone or the card but the ones I have seen like this I ended up flashing the software again from the factory flashing tool and the new card worked normally. If you need the factory flashing tool I can upload it but not til Tuesday when I go back to work. Let me know.
Sent from my MB855 using XDA App
yentlequible said:
Was able to get into recovery. Did a factory reset and wiped everything. Looks like it is still going to take more than 5 minutes to get past that boot screen though. Has anyone ever had this problem? Could my card be done for good? Unless I can find a way for my computer to recognize it, I don't know how I will format it.
Click to expand...
Click to collapse
If you have a card reader for your PC, download one of the Live distributions (Fedora, SuSE, Ubuntu, etc.) and, if you card is viable, you should be able to read the ext4 filesystem on it, get the files off, then format it to vfat.
Dboy352 said:
I have seen them do this and in the end the card needed to be replaced. I haven't been able to figure out if it was the phone or the card but the ones I have seen like this I ended up flashing the software again from the factory flashing tool and the new card worked normally. If you need the factory flashing tool I can upload it but not til Tuesday when I go back to work. Let me know.
Sent from my MB855 using XDA App
Click to expand...
Click to collapse
I can still get the card to show up in my computer, but it will crash when I try and open it up. Ill see what formatting does in this state, but it guess I will just have to get a new card if I can't get this one working again.
stephen_w said:
If you have a card reader for your PC, download one of the Live distributions (Fedora, SuSE, Ubuntu, etc.) and, if you card is viable, you should be able to read the ext4 filesystem on it, get the files off, then format it to vfat.
Click to expand...
Click to collapse
I already lost the files, but I didn't have too much on there anyway. BUT, I did format it from My Computer, and it appears to be working fine now, luckily. I can see my few Android folders on there at least. Ill see how it works now.
yentlequible said:
I already lost the files, but I didn't have too much on there anyway. BUT, I did format it from My Computer, and it appears to be working fine now, luckily. I can see my few Android folders on there at least. Ill see how it works now.
Click to expand...
Click to collapse
Bummer you lost the files but glad you got it working. Best of luck.
Yeah man. I have seen this a few times. I try to backup my memory card at least once a week just incase. Sorry to hear about this bro.
Sent from my MB855 using XDA App
Thanks for the replies guys. Luckily, I didn't have anything that important on my card other than a few pictures, so it didn't turn out too bad. Ill be upgrading to the galaxy note in a few weeks anyway, so I don't really mind.
hi im pretty new here a friend of mine gave me her lg c800 mytouch to try and fix it for her.. not sure what she did she said she rooted the phone and the root was successful but i have a good idea that she doesnt know what she was doing..i will post a pic of the error screen im getting. but it says
E:Cant find misc
E:cant find misc
Finding update package...
E:unknown volume for path [sd:/download/adb_fastboot_and_other_tools.Zip]
E:Cant mount SDCARD:/download/adb_fastboot_and_other_tools.zip
Installation aborted
facory reset failed
restart factory reset..
now im far from a pro at this i know a lil more about computers and Ios devices..but ive rooted a few phones and to me it looks like she unzipped adb fastboot on her phone from her sd card??
ive tried holding F..A..vol down..and power..Nothing..
ive tried volume up .volume down and power still nothing..
BUT if i hold E..vol UP and power it brings me to a white screen that says S/W update
the big problem is the phone wont stay on long enough to do anything on the computer it stays on 3 sec. then reboots to same screen (computer says phone is unplugged) then phone just keeps restarting.
but the phone WILL stay on when i put it on the S/W update screen..but computer wont recognize the phone at all on that screen
ive tried the adb and fastboot commands but the phone wont stay recognized..it will recognize the phone and say thats its in recovery mode but when phone restarts it dont see phone no more..
well thanks ahead of time if anyone has any input or solution
and hopefully all this will make sense to someone lol
i think this pic will work.. if not ill try again
any ideas please?? or am i completely out of luck?
When you say:
delilah25 said:
it will recognize the phone and say thats its in recovery mode but when phone restarts it dont see phone no more..
Click to expand...
Click to collapse
...do you mean that you can successfully communicate with the phone over USB, but you only have 3 seconds? What way is the phone recognized? Is it visible to adb/fastboot?
post-mortem said:
When you say:
...do you mean that you can successfully communicate with the phone over USB, but you only have 3 seconds? What way is the phone recognized? Is it visible to adb/fastboot?
Click to expand...
Click to collapse
Yes In Adb device list it shows the phone and then says recovery..but after that I don't have enough time to type any other commands ..the phone is also recognized in "my computer" as removable device then when the phone restarts seconds later it says device unplugged ..and just keeps restarting on its own till I remove the battery...I just read on the forum in a post that Adb will recognize the phone if it's off but I remove the battery and put it back in and plug in USB and phone turns on and keeps restarting won't even let me turn it off!! I'm losing patience with this thing lol
But I don't get why the error mentions fastboot? Not my phone so if it's not fixable I don't really care but I'm just the stuborn type when it comes to fixing electronics ..again thanks ahead of time to anyone that helps cuz I'm completely lost on this one
Have you tried timing it to send a quick "adb reboot recovery"? If you can use fastboot, you can tell it to boot off a new, custom recovery img, without actually flashing it.
i have the same problem
post-mortem said:
Have you tried timing it to send a quick "adb reboot recovery"? If you can use fastboot, you can tell it to boot off a new, custom recovery img, without actually flashing it.
Click to expand...
Click to collapse
i used an app on the market to remove bloatware. i removed slacker and the app stated that after two reboots that everything would be fine and the app would be gone. after one reboot the phone has the same screen this gentlemans lady friend has. it looks like the app its looking for is no longer zip aligned properly. someone told me to rename a recovery image the error message to trick the bootloader into thinking the missing app is there. hes an app dev so i figured he knows whats what. ive tried everything the gentleman in this post said and more. hell i have two of these phones and rooted the other and made a backup of that phone and dragged the backup to an sd card and rebooted to see if any of the backed up system apks would trigger a successful reboot but to no avail. i have all the drivers i need and adb commands but nothing works because the phone doesnt stay connected to my pc long enough for anything. please reply with some knowledge. ive been scouring the web for at least a month. i was so happy when i came across this. i actually became a member just to post about this erroer (look up diabolus ae in the forum search field. my post is about 3 days old with a better pic of the screen message. i bought a galaxy s II but i want to give the lg to my son. please help or respond:cyclops:
diabolus ae said:
i used an app on the market to remove bloatware. i removed slacker and the app stated that after two reboots that everything would be fine and the app would be gone. after one reboot the phone has the same screen this gentlemans lady friend has. it looks like the app its looking for is no longer zip aligned properly. someone told me to rename a recovery image the error message to trick the bootloader into thinking the missing app is there. hes an app dev so i figured he knows whats what. ive tried everything the gentleman in this post said and more. hell i have two of these phones and rooted the other and made a backup of that phone and dragged the backup to an sd card and rebooted to see if any of the backed up system apks would trigger a successful reboot but to no avail. i have all the drivers i need and adb commands but nothing works because the phone doesnt stay connected to my pc long enough for anything. please reply with some knowledge. ive been scouring the web for at least a month. i was so happy when i came across this. i actually became a member just to post about this erroer (look up diabolus ae in the forum search field. my post is about 3 days old with a better pic of the screen message. i bought a galaxy s II but i want to give the lg to my son. please help or respond:cyclops:
Click to expand...
Click to collapse
Normally, if you want to flash a custom recovery through fastboot, people will tell you to run 2 commands:
fastboot flash recovery nameofimagefile.img
fastboot reboot recovery
Since you don't have time to execute those 2 commands, you can tell it to just boot from the .img file, without flashing over your current recovery. (This is actually proper form, as you can test if the .img file works properly without damaging your existing recovery.) The way you do that is to 1st copy a recovery .img file to the root of your SD card, then execute the following 1 command:
fastboot boot nameofimagefile.img
Since you only have ~3 seconds, type the command in, and wait for the right instant to hit enter on the keyboard. If the command is successfully sent to the phone, it will reboot into that .img.
See if that works for you. Good luck.
People that can't get the roms beyond stock to work, are your phones activated?
Is it possible to use the Pac Man Rom or CM10 on an unactivated phone?
I'm having similar issues to others trying to flash Pac Man and CM10.2. The first boot was fine and I can access everything on the phone fine, including settings. I rebooted and the activation screen (which I skipped as this phone doesn't have service) always pops up but I would like to use it without putting it on a cell network. I can skip the screen fine (until I decide to disable it) but then have issues like the keyboard (physical and touch), systemUI or NAV Bar crashing with a constant message pop up telling me it has crashed. I have returned to stock using RSD and reflashed Pac Man and CM10.2 MANY (15+?) times, doing a clean install 99% of the time but also trying a couple dirty installs to cover my bases. I should also note that I flashed the phone to Cricket but have no plans to activate it anytime soon.
Another thing to note is that I had issues getting the custom roms to boot at all as the initial setup would take hours. One time I though it was a boot loop but I left it on all night and it had booted in the morning. I believe it has something to do with the file check at boot (with my 32GB low speed class SD card) but that seems to be resolved and I can get the custom roms to boot fine (on the first boot) even with my 32GB (witch is fine and has no errors nor is generic, before you ask.) I also have tried 2 4GB cards and a 2GB card, all different brands, with no change in behavior.
I have done everything below multiple times and in different orders.(If needed I can give a direct breakdown step by step but if you could do it with the files below, I have probably tried it)
Wipe the phone (including all storage internal and external SDs included)
Using RDS v6.15
RDS asanti_c_sprint-user-4.1.2-9.8.2Q-122_XT897_FFW-5-6-release-keys-cid9.xml.zip (Works 100% of the time and never has issues. I keep reverting back to this if I actually need to use the phone)
RDS ClockworkMod, TWRP, and Open Recovery without TWRP (Tried different versions when available)
Then used each recovery to install Pac Man or CM10.2 (tried 10.1 once but had the same issues and I didn't see the need to troubleshoot a rom people seemed to not want to develop for. So 10.1 was only tried once but has the same issues)
Installed GApps at this point but I also tried alternate versions of GApps and not installing it at all. All have the same effect and don't seem to be contributing to the problems at all.
A few installed I tried wiping the phone again or installing each zip multiple times. I also verified the zips were good when on the device to make sure there was no corruption at transfer.
I also tried multiple (confirmed working) SD cards and installing from the internal storage.
I have tried installing arrrghhh's Kernel too.
The issue ether seems to be boot loop (if it's doing a file check) or more often it works until I get one of the said crashes after a reboot.(blame Tyler message is getting SO old...) The time I see the errors seems to be accelerated if I mess with the settings a lot but I don't believe it is directly related to the settings.
My next recourse is to try and flash it back to Sprint (maybe check my Cricket settings) and see if that helps, without it being activated.
On a separate note.
If people need help I can help get you back to stock easily. The instructions/guides on here are all but useless if you don't know what you are doing already. I have seen down to "USE RDS" or "DELETE LINE MD5" like people would just know what that means. I understand RDS Lite is a standard tool for flashing phones but it's nigh impossible to find real explanations on what stuff does in context. I understand the basics though, so if anyone has any questions I can walk you through it.
To start with if you are stuck in a loop at the start of a new rom and it loops between the 'Welcome' Screen (Select your Language) and Activation screen just skip the initial setup by tapping the corners on your screen in a clockwise manor when on the 'Welcome' screen to skip the setup there is a video to explain it here
pocketnow(can't post links )com/how-to/android-quick-tip-how-to-bypass-touch-the-android-to-begin-video
Without doing this or activating the phone it seems to loop between those 2 screens forever (might indicate part of the problem with customs roms....)
I hope this is enough info to go off of I can give you a play by play with the actual files if you need. Maybe a video if needed and I'm feeling extra fancy.
Thanks for your time.
Hey buddy,
If you're trying to make a guide, make sure you call it what it is properly - RSD Lite.
Also, maybe clean up your post a bit so it's a proper guide (as you point out, it's needed) and make a separate thread for your question.
To answer your question, the unactivated phone shouldn't be an issue in of itself - you'll just get the nag screen like you were talking about.
I know there is an issue some are having with rebooting the 4.3 ROM's. Have you tried any 4.2.2 versions of anything? Carbon, CM10.1?
I wonder if your "flash" to Cricket is causing issue, I'm not sure. Let me know about 4.2.
Edit - I missed this part on my first read of your PM. Taking hours to boot is NOT normal. Perhaps remove the SD card entirely, flash using the internal SD... I've never heard of that. Anything over say 20 minutes is probably cause for concern.
Thanks for taking time to answer me.
In no way was I trying to make a guide yet but I guess I could. I just hate posting stuff without useful content so I figured throwing that in was better than nothing. I'll clean it up and set up some links later today. It's frustrating to try and make a full guide before I can post links that would be needed for it. You are totally right though! (complain about crappy guides and kind of make one... )
Part of my point there was that I can't post out of Q and A and this wasn't really a question so I made a question out of it and that's how my post ended up.
I have flashed many phones before but like I said I'll try and put it back on Sprint later today (probably will be a few hours) as I backed up the settings the phone came with. I know it was a wall of text and not the easiest to read so you probably missed it but I also said in my first post that I tried the internal SD card many times and the taking hours to boot isn't the standard and doesn't seem to happen at 99% of the time. It seems to be related to the recovery software I use as it happened a lot more when I was testing TWRP and none when I use clockwork.
What Recovery do you recommend? I swear they aren't made equal...
I tested CM10.1 once and it had the exact same issues as CM10.2 and Pac Man so I didn't test it further but if you want me to test it I can. I just didn't want the Rom.
I don't want Carbon either but I'll test that and AOKP next. It's just annoying that the stock rom works perfect but I can't get these to function at all. I almost wish I didn't get Pac Man to work at all. I'm very particular about my settings and NEED these features after I tried them Pac Man is AMAZING.
Thank you for the help and I hope I can get this worked out.
PS I saw that you were frustrated about working on a rom you don't have a device for. I hope you don't let a little thing like that stop you as, for the little time I have used it, it's all I want. Thanks again.
Blasz said:
What Recovery do you recommend? I swear they aren't made equal...
Click to expand...
Click to collapse
Well, OpenRecovery has probably the most work done for this device specifically. I liked TWRP, but it seems lately it has been unstable - you're not the first who has reported issues lately. I don't think CWM has been updated, unfortunately - but perhaps that's a good thing, it's stable that's for sure.
Blasz- I was just about to start a thread when I found yours, and it very accurately describes the issues I've been having. Here's my progress so far.
I got my Photon Q with Sprint and used it for a few months before Sprint started finding creative ways to take my "$79.99" bill and make it more like $140 a month. Naturally, I refused to pay. So I had a Photon Q with no cell service. This is fine, as I only need it to work on WiFi, not 2G/3G and there is no 4G in the area. Anyway.
At the time, I had Ice Cream Sandwich on it, using the (latest?) ICS firmware from Motorola. This worked very well, but I later tried to use a newer firmware, and all the custom ROMs had shown up while I hadn't been looking. All of these seemed to be based on JellyBean. First off, I tried CyanogenMod 10.2. Worked amazing well! I had literally no problems at all. However, while I was experimenting with different software for the phone, and wanted to see if "Arrrgghh"(sp?)'s kernels would give me some decent overclocking capability. Turns out, the kernel I picked wasn't compatible with the JB firmwares (I probably picked an older one by mistake.) Needless to say, it now wouldn't boot. It'd go to the "Unlocked bootloader" screen and stay there all night (literally, I tried that.)
So, I went back into CWM, which is the recovery I have installed. I erased /data, /cache and /system, and also the dalvik cache and battery stats for good measure. I also formatted /pds and /modem, I believe, which was probably dumb of me since I'm not sure what those do. Then I tried re-installing CM 10.2 from CWM. The installation went fine, and it works gorgeously. However, there's two weird issues:
1) WiFi and Bluetooth don't even BEGIN to work! Neither does Cell, as far as I can tell, because where CM used to be unable to make calls or access the internet (of course, I've not been paying my bill), it now shows an empty signal bar or "No Signal" (the little red X) in the notification bar ... When I try to turn on WiFi using the slider in Settings, it moves to "ON" (stays gray) and pauses for a few secs, then goes back to OFF. Same thing for BT. If I open the WiFi menu where you select an AP, it tells me to turn on WiFi. I do, using the slider up top, and the same thing happens. WiFi and BT simply won't turn on. Tried fiddling with every setting I can find.
Before this misadventure with the kernel/reinstall, WiFi worked great. I connected to a local AP and was surfing the net and downloading apps.
2) The system takes a VERY long time to boot up. It sits at the "Unlocked Bootloader" screen for up to a whole minute. Then it goes to the Cyanogen screen for about 30 seconds. Then it gets to the homescreen. It's fine so long as you let it boot up, but this doesn't seem normal.
Next I tried other ROMs thinking that might help. I installed AOKP, PacMan, CM1.0, Carbon, SlimBean, and I think a few others without results-- they all work but WiFi and BlueTooth are dead. PacMan is the only exception-- it boots up and then endlessly gives me "Blame Tyler" errors until I force the machine to shut off.
I also tried an older ROM, since these are all JellyBean ROMs and I wanted to get back to ICS (I'm not that fond of JB's interface) anyway. I was unable to find any ZIPs I could install through CWM of the stock firmware. I found some IMGs that it looks like I could install via Fastboot, but I don't currently have a PC with admin priveleges (it's not mine) so I can't install the drivers to use Fastboot or any part of the SDK. (I can, however, put files on my SD card, that doesn't require privleges.) The closest ROM I found to stock was "TwistedAsanti" beta-1 or whatever it's called. That installs fine, but again, it takes about 2 straight minutes to boot and it's useless after that:
It gets stuck at "Starting Services..." and will sit there forever, even left there all night. Behind this, a dialog pops up saying no cell networks were found and asking if I want to switch to GSM. (i've been trying GSM and CDMA ROMs all this time, I don't need cell access so I doubt it matters which I use. I'm in the USA.) You can pull down the notification bar and get into the Settings, and even launch a couple programs, but I can't find ANY way to get to a homescreen. Task manager shows Circles is running, which is a widget on the homescreen, so where the heck is that screen? .. I try, again, to turn on WiFi or BT without success. The friggin thing just won't turn on.
Did I eff it up by erasing the "PDS" or "modem" partition? Am I missing something obvious or is my phone just possessed?
In a few days I should have access to a computer where I can hopefully use Fastboot and see about installing a stock firmware (wish me luck). Until then, does anyone have a ZIP file I can flash from CWM to get back to an ICS firmware? I managed to find a copy of the stock firmware, in the form of a dump done from TWRP (in .win files). But as far as I know the only way to install TWRP is using Fastboot, and I've explained why I can't do that. I don't know a way to install TWRP from CWM. Maybe I can do it from CM10.2, if I can put APKs or something on my SD card. I can't get it on the network, so I have to copy all the files manually. Needless to say, it's a pain.
After my frenzy of ROM installing, I got frustrated and decided to see if TwistedAsanti would do SOMETHING if I let it sit at "Starting Services" overnight. To my mistake, I left it under my pillow and the system was quite toasty, and the battery had run dead. Plugging it back into the charger, it made a few worrying clicking noises from the speaker, then the green LED came on. This LED seems to mean "I'm charging, but the battery is too dead to turn on for a while." After it sits there a while, the green LED turns off and it just goes black. Or it goes to BOOTLOADER UNLOCKED and bootloops, or goes to black untilyou fiddle with the power button some more. I can once in a blue moon get to CWM. Sometimes it gets to the homescreen. It will charge up to about 4-7% and no further (battery got damaged by the heat?) It doesn't reliably work when plugged in, it likes to shut off at random anyway.
So now I'm stuck with a phone I can't seem to charge, or turn on reliably, and if I *do* get it to boot up, there's no way to connect it to a network.
Needless to say I'm pretty darn frustrated..
Thanks for any advice.
Epicenter714 said:
So now I'm stuck with a phone I can't seem to charge, or turn on reliably, and if I *do* get it to boot up, there's no way to connect it to a network.
Needless to say I'm pretty darn frustrated..
Thanks for any advice.
Click to expand...
Click to collapse
Did you try to use RSD Lite and flash the device back to stock?
arrrghhh said:
Did you try to use RSD Lite and flash the device back to stock?
Click to expand...
Click to collapse
Currently, I have no PC to use that has Admin priveleges, so I can't install the USB drivers or RSDLite. I also can't use fastboot to install TWRP to use the TWRP .win backups I found.
I did get a roommate to let me use his laptop for 10 minutes to try RSD Lite, but I had this result: Loaded the ".xml.zip" file for the 4.0.4 and 4.1.2 firmwares (after removing the 'getvar' line that causes problems) and it says the phone reported "FAIL". No further details. MiniRSD gives no info from the phone other than the model (it all stays blank), is that supposed to happen? I have the phone in "AP Fastboot" mode so I don't see the problem.
The guy who let me use his PC momentarily is computer-illiterate and thinks anything will break it, so he only let me use it momentarily, and won't let me touch it because I accidentally left an icon on his desktop. I'll have to ask someone else, I think I may know somone..
If I do, how do I get around this error in RSD Lite? Will keep doing research on my own .. thanks!
Epicenter714 said:
Currently, I have no PC to use that has Admin priveleges, so I can't install the USB drivers or RSDLite. I also can't use fastboot to install TWRP to use the TWRP .win backups I found.
I did get a roommate to let me use his laptop for 10 minutes to try RSD Lite, but I had this result: Loaded the ".xml.zip" file for the 4.0.4 and 4.1.2 firmwares (after removing the 'getvar' line that causes problems) and it says the phone reported "FAIL". No further details. MiniRSD gives no info from the phone other than the model (it all stays blank), is that supposed to happen? I have the phone in "AP Fastboot" mode so I don't see the problem.
The guy who let me use his PC momentarily is computer-illiterate and thinks anything will break it, so he only let me use it momentarily, and won't let me touch it because I accidentally left an icon on his desktop. I'll have to ask someone else, I think I may know somone..
If I do, how do I get around this error in RSD Lite? Will keep doing research on my own .. thanks!
Click to expand...
Click to collapse
Well remember - if you are on JB and you are downgrading to ICS, there are additional lines to remove.
Other than that, not sure why it would fail. Make sure 'fastboot devices' works in the command line before doing RSD perhaps.
arrrghhh said:
Well remember - if you are on JB and you are downgrading to ICS, there are additional lines to remove.
Other than that, not sure why it would fail. Make sure 'fastboot devices' works in the command line before doing RSD perhaps.
Click to expand...
Click to collapse
I'm trying to wipe the device clean and install ICS. Are there any other lines I need to remove? ..
As for Fastboot.. I did 'Fastboot Devices' and got no devices listed. How come it shows up in MiniRSD? .. I have the drivers installed, Windows says it installed an ADB device successfully. What are some reasons that might not work? Is there any sort of guide for this? Thank you
---------- Post added at 05:51 PM ---------- Previous post was at 05:29 PM ----------
Oh, as far as the weird booting problem, it seems the battery is fine and the charger died coincidentally at the same time as the overheating did. So my only problem is software now.. thanks.
Epicenter714 said:
I'm trying to wipe the device clean and install ICS. Are there any other lines I need to remove? ..
As for Fastboot.. I did 'Fastboot Devices' and got no devices listed. How come it shows up in MiniRSD? .. I have the drivers installed, Windows says it installed an ADB device successfully. What are some reasons that might not work? Is there any sort of guide for this? Thank you
---------- Post added at 05:51 PM ---------- Previous post was at 05:29 PM ----------
Oh, as far as the weird booting problem, it seems the battery is fine and the charger died coincidentally at the same time as the overheating did. So my only problem is software now.. thanks.
Click to expand...
Click to collapse
I have no clue what MiniRSD is - you mean RSD Lite?
If it doesn't show up in fastboot devices, sort that out before trying to use RSD.
As I stated previously, if you were on JB and going down to ICS you have additional lines which are needed to remove.
Yes, RSD Lite. I don't know where I got MiniRSD from.
I got it to show up in fastboot devices, but adb devices doesn't show it. Weird. Is that OK?
I was able to flash TWRP to the phone with Fastboot. RSD Lite was unable to find the phone. However, I opened the XML file and was able to figure out the flash commands to enter from a command prompt, so I did that:
I got these results... all of the files flashed successfully to stock, except for two. I forget the first, haven't got it in front of me, but here's the big one: SYSTEM! (Important, no?) Here's the error from fastboot:
>> fastboot flash system system.img.ext4
fastboot said:
target reports max download size 31457280 bytes
Invalid sparse file format at header magi
Click to expand...
Click to collapse
(then, Fastboot crashes.)
Does anyone know how to fix that? Also, the system image is way bigger than 31.4 MB. What is it talking about?
Thanks!
Epicenter714 said:
Yes, RSD Lite. I don't know where I got MiniRSD from.
I got it to show up in fastboot devices, but adb devices doesn't show it. Weird. Is that OK?
I was able to flash TWRP to the phone with Fastboot. RSD Lite was unable to find the phone. However, I opened the XML file and was able to figure out the flash commands to enter from a command prompt, so I did that:
I got these results... all of the files flashed successfully to stock, except for two. I forget the first, haven't got it in front of me, but here's the big one: SYSTEM! (Important, no?) Here's the error from fastboot:
>> fastboot flash system system.img.ext4
(then, Fastboot crashes.)
Does anyone know how to fix that? Also, the system image is way bigger than 31.4 MB. What is it talking about?
Thanks!
Click to expand...
Click to collapse
I would NOT recommend entering those fastboot commands in the XML file manually unless you KNOW what you are doing.
Sort out why RSD isn't working. adb and fastboot are two different things. If fastboot devices shows the device, RSD Lite should work fine. Try again.
Ok, I'm an idiot. A big one.
I was looking to flash back to stock after using some lollipop roms. I was using TK's toolbox which was an extremely handy utility but in the peak of my madness, I hit lock bootloader with TWRP still installed.
Since hitting lock bootloader i'm not stuck with TWRP and it's crippled my phone since the current ROM no longer seems to be fully functional...I can't seem to download anything else from the web. Everything seems to fail.
I've tried fastboot oem unlock and it goes through the process that appears to be successful but it just boots back into TWRP and it's not unlocked. Does anyone have any suggestions or do I have a $300 paper weight. haha
Tonymhoffman said:
Ok, I'm an idiot. A big one.
I was looking to flash back to stock after using some lollipop roms. I was using TK's toolbox which was an extremely handy utility but in the peak of my madness, I hit lock bootloader with TWRP still installed.
Since hitting lock bootloader i'm not stuck with TWRP and it's crippled my phone since the current ROM no longer seems to be fully functional...I can't seem to download anything else from the web. Everything seems to fail.
I've tried fastboot oem unlock and it goes through the process that appears to be successful but it just boots back into TWRP and it's not unlocked. Does anyone have any suggestions or do I have a $300 paper weight. haha
Click to expand...
Click to collapse
Believe it or not, I have the same problem since yesterday. Its driving me mad since I'm no expert on rooting/unlocking
Phone gets detected by PC and by the toolbox but I can not unlock my phone again.
I am now stuck with TWRP and the only rom I can flash is Slimkat, all the others fail. If I hit unlock bootloader in the toolbox it goes through the process (fast) and it gives no error, boots back up to TWRP and thats it, but it is still locked
I just want it back locked and stocl CM11
Firstly, don't use toolkits. They are often the cause of issues.
Follow this thread to solve your problem: http://forum.xda-developers.com/oneplus-one/general/tool-oneplus-one-return-to-stock-t2970390
Fixed it!
Solution: http://forum.xda-developers.com/oneplus-one/development/mod-reset-unlock-tamper-bit-t2820912
PewLaserBeam said:
Fixed it!
Solution: http://forum.xda-developers.com/oneplus-one/development/mod-reset-unlock-tamper-bit-t2820912
Click to expand...
Click to collapse
Damn you're lucky!
I'm having more issues because my phone won't let me download anything. It's like there is no SD card detected. I can't get that file onto my phone to flash it. Any ideas how I can do it?
I have ADB enabled and it shows up in my devices but it won't respond to adb sideload oneplusone-bootunlocker.zip
It responds to fastboot commands.. it just won't let me download anything off the net onto the device. IT will however update phone apps.. It's so damn frustrating.
Tonymhoffman said:
Damn you're lucky!
I'm having more issues because my phone won't let me download anything. It's like there is no SD card detected. I can't get that file onto my phone to flash it. Any ideas how I can do it?
I have ADB enabled and it shows up in my devices but it won't respond to adb sideload oneplusone-bootunlocker.zip
It responds to fastboot commands.. it just won't let me download anything off the net onto the device. IT will however update phone apps.. It's so damn frustrating.
Click to expand...
Click to collapse
I had this yesterday + I kept getting the message 'No OS installed'. Since it was already half 'broken', out of frustration I clicked everything and used all sorts of commands I could find (not the best idea I know :angel untill my PC detected the internal memory and then I downloaded 6-7 roms just to be sure. Slimkat was the only one without a fail.
How did you get the files over to your phone then if it wouldn't let you send them to it?
I finally got my internal memory to show up by mounting the system in the TWRP recovery.. But still getting an error that the device stopped responding or is disconnected.. However, it will let me open and view any file on the system, it just won't let me write to it.
Adb sideload did the fix for me after a while.
But it looks loke you have another problem.
Tonymhoffman said:
How did you get the files over to your phone then if it wouldn't let you send them to it?
I finally got my internal memory to show up by mounting the system in the TWRP recovery.. But still getting an error that the device stopped responding or is disconnected.. However, it will let me open and view any file on the system, it just won't let me write to it.
Click to expand...
Click to collapse
Instead of trying to sideload the unlocker zip have you tried using the adb push command?
Timma
Thanks for the reply. The solution for me was to mount the phone in TWRP. This allowed my SD card to be explored in Windows. However, it still would not allow me to copy files to the main directory and just out of frustration I quickly drag and dropped a PDF file that landed on a folder in the SD directory and it worked. Haha. So I then tried to copy the file inside another folder instead of the main directory. Success. What a headache and big ass mistake I'll never make again.
Note to self. Do not lock the bootloader with a custom recovery still installed. Ever.