Related
hi Guys
I'm in the forum for a very long time as an assistant helper now it has got me hard I have an Axon 10 Pro with curly boot loader and trying to flash a TWRP I have somehow the device or SotA and SlotB have shrunk. The Axon Bootet permanently in 0.5 second cycle and also a FULL Restot or FULL Flash with EDL Tool has not changed anything. Likewise, a new flash about fastboot with the command (fastboot flash boot_a boot.img) the same for boot_b then try with fastboot command (fastboot boot twrp.img) Recovery to start without success fastboot erase boot_a and boot_b has also flashing new but it does not start. Always bootloop:crying::crying::crying::crying:
the Axon 10 pro is back because he had no backup of all we had from my Axon 10 pro made a backup with the edl tool (Backup all) and have then copied his efs backup purely and then this with then on the Axon 10 flashed the Axon 10 pro is now back
Where did you get the twrp from?
From udev
On his donload page
https://forum.xda-developers.com/showpost.php?p=80156866&postcount=3
I had a bootloop issue as well and even though I reflashed using the EDL tool, it doesn't erase and the errors remained, but when I entered EDL mode and reflashed using the Xiaomi Flash Tool, storage was completely erased and the device was flashed cleanly and booted correctly.
I've encountered a similar issue with my Axon (2020U version). I can boot into EDL but nothing else (no fastboot, recovery, etc.). I previously had TWRP up and running successfully, not sure what happened.
Is there a full EDL zip or similar that I can flash to return everything to stock? I tried restoring with the EDL tool but with no success
jbeaulieu said:
I've encountered a similar issue with my Axon (2020U version). I can boot into EDL but nothing else (no fastboot, recovery, etc.). I previously had TWRP up and running successfully, not sure what happened.
Is there a full EDL zip or similar that I can flash to return everything to stock? I tried restoring with the EDL tool but with no success
Click to expand...
Click to collapse
The reason the EDL tool may not work is that is doesn't have the capability to erase. The boot loop that occurs is usually due a corrupt bootfile. Use the MiFlash fastboot recovery tool. Make sure to select the clean all button at the bottom. Place your phone in EDL mode. Hit refresh to make sure your phone is detected. Select the EDL file and then hit flash.
jim262 said:
The reason the EDL tool may not work is that is doesn't have the capability to erase. The boot loop that occurs is usually due a corrupt bootfile. Use the MiFlash fastboot recovery tool. Make sure to select the clean all button at the bottom. Place your phone in EDL mode. Hit refresh to make sure your phone is detected. Select the EDL file and then hit flash.
Click to expand...
Click to collapse
Apologies for my ignorance - what exactly am I flashing? I see the "clean all" radio button, but I'm not sure what EDL package to flash after selecting that option - is there a 2020U package floating around that I'm not seeing?
jbeaulieu said:
Apologies for my ignorance - what exactly am I flashing? I see the "clean all" radio button, but I'm not sure what EDL package to flash after selecting that option - is there a 2020U package floating around that I'm not seeing?
Click to expand...
Click to collapse
The EDL package, use the same EDL package that you used with the EDL tool. Just select the "clean all" radio button. Select the path to the EDL , hit refresh once phone, in EDL mode, is detected, hit flash.
jim262 said:
The EDL package, use the same EDL package that you used with the EDL tool. Just select the "clean all" radio button. Select the path to the EDL , hit refresh once phone, in EDL mode, is detected, hit flash.
Click to expand...
Click to collapse
Okay, I'm trying to use MiFlash to restore the backup I took through the original EDL tool. The MiFLash tool is only timing out with a "cannot receive hello packet" - was this something you encountered as well?
jbeaulieu said:
Okay, I'm trying to use MiFlash to restore the backup I took through the original EDL tool. The MiFLash tool is only timing out with a "cannot receive hello packet" - was this something you encountered as well?
Click to expand...
Click to collapse
I did attempt to flash the wrong EDL file (They are region and device specific) and received that error. I have the Chinese version and once I downloaded the correct EDL file, I had no issues I have even maintained an unlocked boot loader, flashed Magisk and taken OTAs.
jim262 said:
I did attempt to flash the wrong EDL file (They are region and device specific) and received that error. I have the Chinese version and once I downloaded the correct EDL file, I had no issues I have even maintained an unlocked boot loader, flashed Magisk and taken OTAs.
Click to expand...
Click to collapse
Ah, okay. I have the US version - A2020U. Unless I'm mistaken, it looks like there isn't a full EDL zip file available for my version yet, so I might be stuck
There were EDL files up, but apparently they were taken down for some reason.
in the russians there are the 1.6 of the g model as edl (which one can use in a brick) but I do not know if this is synonymous with the u model as you would have to ask @Unjustified Dev or something
@MOD
I hope that the links are allowed here else delete please
1.6 g model edl
http://4pda.ru/forum/index.php?showtopic=965431&st=0#entry88768840
And the lonk too the forum
http://4pda.ru/forum/index.php?showtopic=965431
Chris axon 7 said:
in the russians there are the 1.6 of the g model as edl (which one can use in a brick) but I do not know if this is synonymous with the u model as you would have to ask @Unjustified Dev or something
@MOD
I hope that the links are allowed here else delete please
1.6 g model edl
http://4pda.ru/forum/index.php?showtopic=965431&st=0#entry88768840
And the lonk too the forum
http://4pda.ru/forum/index.php?showtopic=965431
Click to expand...
Click to collapse
Thanks for sharing these. @Unjustified Dev do you happen to know if the 1.6 2020G EDL would be able to be flashed to a 2020U model to recover from a brick? Or if not, is there a place to obtain the proper files, either here on the forums or via PM?
jim262 said:
I did attempt to flash the wrong EDL file (They are region and device specific) and received that error. I have the Chinese version and once I downloaded the correct EDL file, I had no issues I have even maintained an unlocked boot loader, flashed Magisk and taken OTAs.
Click to expand...
Click to collapse
Please share us the EDL file for the Chinese version.
has anyone found the US EDL file yet?
Futility's Forgotten Soldier said:
has anyone found the US EDL file yet?
Click to expand...
Click to collapse
Still waiting. I'm stuck on the EU version.
Hi,
My phone is actually dying and I don't know how to recover it this time.
I had a perfectly working setup with latest weekly update of Xiaomi eu MIUI , TWRP and magisk, and know even fastboot is not responding.
I usually don't like when people say that, but I think a malware did it, as my apps started not responding in a few minutes, and the reboot finished the job.
Now it won't boot anymore, when it's plug the notification led is red, and fastboot is detected but commands are stuck.
Also, TWRP is neither accessible from "power + vol up" since last miui eu update, nor from fastboot since the "accident"
If someone have any advice on how to unlock fastboot, flash back the rom or any other way to recover my phone, please help
Also, if you want to know the rest of the story, it's here...
I was using my phone as usual, trying to setup a bridge openvpn connection. (like everyone :laugh: )
The issue is that the only app claiming to do that isn't free, and I want to be sure I can make it work before spending any money.
So I tried to patch it and different apks (I know it's bad...), and while transferring an apk from my laptop to my phone, I noticed the transfer was kinda slow for a few seconds (nothing worrying, but unusual)
Then some of my apps didn't want to launch and, back to the app drawer, most of my apps had their package names, with no icons...
It was at this moment Jackson I knew I screwed up...
I then tried rebooting, and the phone stayed a few minutes on the MIUI screen, then shut off.
After a reboot, I noticed the red led, the absence of boot animation, and the bootloop.
Obviously, if I had a fastboot access, it would be easy to boot on TWRP and then flash back my rom properly but I can't...
EDIT: to make this clearer (I know the post above is a little bit messy), I have the following issues:
- No access to TWRP (for flashing)
- Fastboot is accessible but broken enough so flash/boot to twrp is not possible
- I just though of EDL mode, but "fastboot oem edl" doesn't seems to work
- I prefer to avoid opening my phone (to access to the EDL test points)
EDIT2: You can't flash anything in EDL mode without specific autorisations from xiaomi, so this mode becomes way more useless than on my previous Mi A1. I managed to miraculously flash some things by using miflash in fastboot mode. Maybe working on a windows os instead of gnu/linux helped somehow...
Thelm76 said:
Hi,
My phone is actually dying and I don't know how to recover it this time.
I had a perfectly working setup with latest weekly update of Xiaomi eu MIUI , TWRP and magisk, and know even fastboot is not responding.
I usually don't like when people say that, but I think a malware did it, as my apps started not responding in a few minutes, and the reboot finished the job.
Now it won't boot anymore, when it's plug the notification led is red, and fastboot is detected but commands are stuck.
Also, TWRP is neither accessible from "power + vol up" since last miui eu update, nor from fastboot since the "accident"
If someone have any advice on how to unlock fastboot, flash back the rom or any other way to recover my phone, please help
Also, if you want to know the rest of the story, it's here...
I was using my phone as usual, trying to setup a bridge openvpn connection. (like everyone :laugh: )
The issue is that the only app claiming to do that isn't free, and I want to be sure I can make it work before spending any money.
So I tried to patch it and different apks (I know it's bad...), and while transferring an apk from my laptop to my phone, I noticed the transfer was kinda slow for a few seconds (nothing worrying, but unusual)
Then some of my apps didn't want to launch and, back to the app drawer, most of my apps had their package names, with no icons...
It was at this moment Jackson I knew I screwed up...
I then tried rebooting, and the phone stayed a few minutes on the MIUI screen, then shut off.
After a reboot, I noticed the red led, the absence of boot animation, and the bootloop.
Obviously, if I had a fastboot access, it would be easy to boot on TWRP and then flash back my rom properly but I can't...
Click to expand...
Click to collapse
Hi
I had a similar situation
I comfigured an app and during configuration the phone start framing
I rebooted and stucked at miui screen
I tried to reboot in recovery ,nothing
I downloaded latest miui for europe 12.0.3 and mi flash
For me fastboot worked to flash latest firmware from xiaomi
And now is working and my bootloader is locked
Thelm76 said:
Hi,
My phone is actually dying and I don't know how to recover it this time.
[/hide]
Click to expand...
Click to collapse
Xiaomi.eu has TWRP issue...
Go to https://www.androidfilehost.com/?w=files&flid=50678 and find your recovery (lmi) and flash it with fastboot and boot to recovery.
fastboot flash recovery twrp.img
fastboot boot twrp.img
Now download the new ROM 20.10.16, push it to the internet storage and install it dirty... Wipe Cache and reboot....
My problem is almost same, i unlock the bootloader to flash xiaomi.eu rom from global rom, unlocking and flashing custom recovery was done smoothly, when i tried to flash xiaomi.eu rom version 12.0.8 it booted back to recovery, and i format the data partition and booted to system, and same result. I tried global its same result.
Then i tried miflash tool, " antirollback error ".
Now i don't know what to do. Hope my precious poco f2 pro is not bricked, coz i can still manage to boot in custom recovery, and can use miflash tool but error.
Can someone out there help me please. Thanks in advance.
Eldybug said:
My problem is almost same, i unlock the bootloader to flash xiaomi.eu rom from global rom, unlocking and flashing custom recovery was done smoothly, when i tried to flash xiaomi.eu rom version 12.0.8 it booted back to recovery, and i format the data partition and booted to system, and same result. I tried global its same result.
Then i tried miflash tool, " antirollback error ".
Now i don't know what to do. Hope my precious poco f2 pro is not bricked, coz i can still manage to boot in custom recovery, and can use miflash tool but error.
Can someone out there help me please. Thanks in advance.
Click to expand...
Click to collapse
Since you have access to a properly working fastboot and recovery, I believe there is always a way to recover your phone.
I'll be glad to help you but for now, I'm more focused on my issue.
Only thing, while using miflash, be careful to never lock your bootloader since you would have to open your phone to access EDL mode in case of bootloop
(but you can lock it afterwards if you want)
Enricosteph said:
Xiaomi.eu has TWRP issue...
Go to https://www.androidfilehost.com/?w=files&flid=50678 and find your recovery (lmi) and flash it with fastboot and boot to recovery.
fastboot flash recovery twrp.img
fastboot boot twrp.img
Now download the new ROM 20.10.16, push it to the internet storage and install it dirty... Wipe Cache and reboot....
Click to expand...
Click to collapse
Well, the main issue here is that fastboot seems to be broken too...
i found this for you on the LOS rom for poco f2 pro (am not the autor) this is for the "Anti-rollback error" (i hope that can help you):
romabah said:
Gentlemen with EU versions of Poco F2 pro, could you help me out?
Right now i am running 12.0.2.0 QJKEUXM.
To flash Lineage i first need to flash MIUI V12.0.3.0.QJKMIXM via MiFlash. I tried to do that but got an Anti-rollback error.
Checking via fastboot i saw that my phones anti rollback value is 1, but MIUI V12.0.3.0.QJKMIXM firmware has an anti rollback of 0.
Some folks say to delete first 5-6 lines in text editor from .bat file, but at the same time people tell everywhere to NOT flash firmware with lower value that your current anti rollback.
Any advice? How did other EU folks fix this?
Edit: I fixed it! I will NOT and cannot claim that this will fix all rollback error's, but it fixed mine.
0) This is applicable to fastboot version of MIUI V12.0.3.0.QJKMIXM (aka tgz file that you need to extract twice)
1) Move the extracted firmware directory imi_global_images_V12.0.3.......ets.ets. ( map with flash_all.bat, images ) to C: directory and rename to something short, like xiaomiFirm.
This will solve a lot of weird error's as MiFlash doesnt like long directories
2) Within the moved map open flash_all.bat with text editor and delete everything starting and including "::check anti_version" to and including "echo %..."
This removes the anti rollback check somehow. The reason for only editing flash_all.bat is because this is the .bat file that is run when you choose clean all option in MiFlash, i assume you dont want to clean all and lock now do you?
3) After finishing flashing mine gave error Not catch checkpoint flash is not done, but booted normally. Gave me a heart attack.
Sanity check: When running cmd "fastboot getvar anti" it returned "anti: 1"
Meaning i just flashed a ROM with anti of 0 on a phone with a anti value of 1. At least i believe so.
In any case, thank all for giving feedback for other ways of fixing this.
Click to expand...
Click to collapse
I'll try to make a type C deep flash cable to flash fastboot, and edit this message to explain if this works
Thelm76 said:
Well, the main issue here is that fastboot seems to be broken too...
Click to expand...
Click to collapse
Try to hold down only Vol Down and connect it to your computer
Enricosteph said:
Try to hold down only Vol Down and connect it to your computer
Click to expand...
Click to collapse
I don't know if this was my cable or fastboot oem edl, but windows recognised the phone as qualcomm qdloader 9008. I'll now try to update fastboot, install twrp and check the extent of the damages.
Fangstergangsta said:
i found this for you on the LOS rom for poco f2 pro (am not the autor) this is for the "Anti-rollback error" (i hope that can help you):
Click to expand...
Click to collapse
Indeed, OP, try to flash everything from the start thep by step.
You must stop therapeutic relentlessness!!!
Just plug out the charger and let him die softly...
Put him back in his sweet box after his last breathe
Bury him in your garden with a decent burial : he deserve it!!!!
It's HIS TIME, dude....
Regards
Mastakony said:
You must stop therapeutic relentlessness!!!
Just plug out the charger and let him die softly...
Put him back in his sweet box after his last breathe
Bury him in your garden with a decent burial : he deserve it!!!!
It's HIS TIME, dude....
Regards
Click to expand...
Click to collapse
Haha it's not therapeutic relentlessness when you're sure it will live again in a few days (and fully working!)
It just need a good memory wipe and android replacement
As I managed to get to emergency mode, I can now easily replace its software
EDIT: I didn't know that for these xiaomi devices, you need very specific autorisations to flash something with EDL... Fortunately, after messing around with miflash, I managed to unlock myself out of this infinite loop
As I managed to get to emergency mode, I can now easily replace its software
Click to expand...
Click to collapse
How are you going to flash the software?
Well,
By using edl mode and miflash, I got some errors as I was not authorised to do this operation, so I rebooted to fastboot, reused miflash, and I don't know which kind of magic did that but after some files flashed and an error, I was able to boot on TWRP. With this done, I tried to keep my data but didn't worked, and as I have everything constantly backup, I dicided to do a flashall.
now, I think I have a good MIUI base to flash MIUI EU back
Thelm76 said:
Well,
By using edl mode and miflash, I got some errors as I was not authorised to do this operation, so I rebooted to fastboot, reused miflash, and I don't know which kind of magic did that but after some files flashed and an error, I was able to boot on TWRP. With this done, I tried to keep my data but didn't worked, and as I have everything constantly backup, I dicided to do a flashall.
now, I think I have a good MIUI base to flash MIUI EU back
Click to expand...
Click to collapse
I have the same situation plus no fastboot or recovery at all.. Please tell me how did you resolve it?
ghannaiem said:
I have the same situation plus no fastboot or recovery at all.. Please tell me how did you resolve it?
Click to expand...
Click to collapse
Is the phone detected by the pc in usb?
And when you press power+ sound + or - What is happening?
NOSS8 said:
Is the phone detected by the pc in usb?
And when you press power+ sound + or - What is happening?
Click to expand...
Click to collapse
Yes , detected by usb but as qcom 9008,
And when holding down power button with + or - vol it restarts again to 9008 .
So it is not detected by any means, but only detected in edl mode
ghannaiem said:
Yes , detected by usb but as qcom 9008,
And when holding down power button with + or - vol it restarts again to 9008 .
So it is not detected by any means, but only detected in edl mode
Click to expand...
Click to collapse
how did it happen?
My imei got lost so I tried to flash eng rom through MI flash to fix it. It flashes all except certain file called (aop. Mbn) so I tried to flash it by cmd commands via fastboot and then the phone bricked.. No booting to fastboot anymore , no recovery. even with disconnecting battery and reconnecting again... Phone only recognized in Edl mode and when flashing through MI flash it asks for edl authorization... Account login successful but then flash fail cuz account is not authorized. So I think The only solution will be authorized account or patched prog_ufs file
Hi
My Redmi note 7 pro is bricked and it is in locked state .
I tried flashing fastboot rom from edl mode
But it gaves errors like
1) cannot receive hello packet
2)Only nop and sig tag can be recevied before authentication.
Please help me guys regarding this its been a while without my phone
AwesomeAman said:
Hi
My Redmi note 7 pro is bricked and it is in locked state .
I tried flashing fastboot rom from edl mode
But it gaves errors like
1) cannot receive hello packet
2)Only nop and sig tag can be recevied before authentication.
Please help me guys regarding this its been a while without my phone
Click to expand...
Click to collapse
Firstly, can you still boot into Fastboot mode? Secondly, you said you flash fastboot ROM from EDL, how you get into that EDL mode, and you're flashing by MiFlash right?
Clear the information, I might help you!
LinhBT said:
Firstly, can you still boot into Fastboot mode? Secondly, you said you flash fastboot ROM from EDL, how you get into that EDL mode, and you're flashing by MiFlash right?
Clear the information, I might help you!
Click to expand...
Click to collapse
Answers:
Yes it is going on fastboot mode
I got into edl mode by opening back Pannell of my device and i connected edl points
I am flashing via mi flash.
Actually in mi flash tool by mistake i flashed fastboot rom by selecting flash and lock.
Now when i flash the same by selecting clean all option by putting my device on edl mode
It show cannot receive hello packet.
This put me in this trouble
AwesomeAman said:
Answers:
Yes it is going on fastboot mode
I got into edl mode by opening back Pannell of my device and i connected edl points
I am flashing via mi flash.
Actually in mi flash tool by mistake i flashed fastboot rom by selecting flash and lock.
Now when i flash the same by selecting clean all option by putting my device on edl mode
It show cannot receive hello packet.
This put me in this trouble
Click to expand...
Click to collapse
Right, then you did the testpoint trick to get in EDL mode! Ofcourse now you can't use MiFlash with clean all to flash your device since your device is now in brick state. Only solution now is to find the factory images of your device, along with an authenticated prog file then use QFIL to force flash into device. You may inbox me if need further instructions!
i have the same issue pls help
LinhBT said:
Right, then you did the testpoint trick to get in EDL mode! Ofcourse now you can't use MiFlash with clean all to flash your device since your device is now in brick state. Only solution now is to find the factory images of your device, along with an authenticated prog file then use QFIL to force flash into device. You may inbox me if need further instructions!
Click to expand...
Click to collapse
Sir, I have exact same device and I am also stuck in edl mode. It looks there are no patched firehose files for violet. Is there any possible way you can help??
Hi guys,
so after I got my xiaomi with a global ROM and wanted to update and that is when I accidentally relocked the bootloader. The version of ROM was invalid apparently and wouldn't let me boot and now I'm stuck in fastboot mode.
My problem is as follows:
-can't enter recovery, stuck at fastboot no matter how many times I try and reboot
-adb not working since I didn't enable it
-bootloader locked (miflash says so and it can't unlock it since I didn't check 'oem unlock enable' and I cannot boot ROM so I can't enable it)
-fastboot flashing says 'not allowed in lock state'
-edl mode not available
I've seen tutorials where people opened their phones to force the phone into edl mode via the testing points but is that the only way`?
Any suggestions on how I could unbrick it?
Much appreciated
yes, it is the only way.
koniv90 said:
Hi guys,
Any suggestions on how I could unbrick it?
Much appreciated
Click to expand...
Click to collapse
you can use this tool to flash the phone on fastboot mode
Xiaomi King Tool - Home.
xiaomikingtool.com
its cost you only 5 credit
Can you flash files by fastboot? if so, flash the global rom images one by one, then reboot
I know this is a late reply, but I was in a similar situation with my phone and here is how I dealt with it: You need to access EDL mode, it doesn't require disassembling the device like the other user here suggested. Here is a thread you can find several variations of fixes here: https://forum.xda-developers.com/t/xiaomi-12-pro-completely-bricked-dead.4422997/
If anyone needs help with a locked bootloader bootlooped phone and doesn't know what to do I can help for a fee.
eclipsek20 said:
I know this is a late reply, but I was in a similar situation with my phone and here is how I dealt with it: You need to access EDL mode, it doesn't require disassembling the device like the other user here suggested. Here is a thread you can find several variations of fixes here: https://forum.xda-developers.com/t/xiaomi-12-pro-completely-bricked-dead.4422997/
If anyone needs help with a locked bootloader bootlooped phone and doesn't know what to do I can help for a fee.
Click to expand...
Click to collapse
I need help please my phone redmi k50 gaming is no recovery and . bootloader is locked
eclipsek20 said:
I know this is a late reply, but I was in a similar situation with my phone and here is how I dealt with it: You need to access EDL mode, it doesn't require disassembling the device like the other user here suggested. Here is a thread you can find several variations of fixes here: https://forum.xda-developers.com/t/xiaomi-12-pro-completely-bricked-dead.4422997/
If anyone needs help with a locked bootloader bootlooped phone and doesn't know what to do I can help for a fee.
Click to expand...
Click to collapse
Please I have pocophone f1 which says system has been destroyed I have downloaded the firmware xiaomi_poco_f1_V12.0.2.0.QEJRUXM_20200907.0000.00_Gobal_10_XFT (by xiaomistockrom.com) and Qualcom Driver V1.0 and MiFlash tool 20210226 and ADB drive R13 and MiFlash unlock tool en-3.5.1128.45 and platform tool r33.0.3-windows after installing all this drives the phone doesn't want to flash when I use MIFLASH TOOL to flash it say ERROR FLASH IS NOT ALLOWED IN LOCK STATE MODE. when I use windows powershell it says the same thing it looks like the bootloader is lock and I don't know the xiaomi e-mail, number and password on the phone pls help me
This what I'm facing
Dims_Camper said:
yes, it is the only way.
Click to expand...
Click to collapse
So even with a locked bootloader and disabled developer options, I can still flash stock rom in edl mode, regardless?
kskksks said:
So even with a locked bootloader and disabled developer options, I can still flash stock rom in edl mode, regardless?
Click to expand...
Click to collapse
Nope, only very old devices.
NOSS8 said:
Nope, only very old devices.
Click to expand...
Click to collapse
So that's why I get the error "operation not allowed for write" in QFIL... What do i do then? Is there a way to unlock bootloader in edl mode? I can't access recovery mode because of the bootloop... Only EDL mode
kskksks said:
So that's why I get the error "operation not allowed for write" in QFIL... What do i do then? Is there a way to unlock bootloader in edl mode? I can't access recovery mode because of the bootloop... Only EDL mode
Click to expand...
Click to collapse
Have you tried to flash stock rom?
I mean, if you have Chinese rom before, just flash with latest Chinese rom.
Ghanaba said:
Please I have pocophone f1 which says system has been destroyed I have downloaded the firmware xiaomi_poco_f1_V12.0.2.0.QEJRUXM_20200907.0000.00_Gobal_10_XFT (by xiaomistockrom.com) and Qualcom Driver V1.0 and MiFlash tool 20210226 and ADB drive R13 and MiFlash unlock tool en-3.5.1128.45 and platform tool r33.0.3-windows after installing all this drives the phone doesn't want to flash when I use MIFLASH TOOL to flash it say ERROR FLASH IS NOT ALLOWED IN LOCK STATE MODE. when I use windows powershell it says the same thing it looks like the bootloader is lock and I don't know the xiaomi e-mail, number and password on the phone pls help me
Click to expand...
Click to collapse
Try to flash the .img files of the fastboot rom, unzip the rom and find all the .img files and flash them with CMD from fastboot, one by one
jholfran3 said:
Try to flash the .img files of the fastboot rom, unzip the rom and find all the .img files and flash them with CMD from fastboot, one by one
Click to expand...
Click to collapse
Hello, My Poco X3 System destroyed itself while I was using it, it showed a glitch screen and turned off. Now I went to flash my mobile through Miflash but it showed the bootloader is locked and now I can't unlock it as the system itself is destroyed and can't do anything. So i wanted to know if i can flash my mobile with cmd as you said above flashing img files one by one or let me know if there is any method to flash my mobile or unlock the bootloader? Please me help bro
flashing is possible with modified firehose programmer (no auth factory loader) or with authorized xiaomi account. both solutions are paid service and cannot advertised here.
please -as always- read the thread you posted in. I can see useful information shared already. wait for other replies.
letsgofly said:
Hello, My Poco X3 System destroyed itself while I was using it, it showed a glitch screen and turned off. Now I went to flash my mobile through Miflash but it showed the bootloader is locked and now I can't unlock it as the system itself is destroyed and can't do anything. So i wanted to know if i can flash my mobile with cmd as you said above flashing img files one by one or let me know if there is any method to flash my mobile or unlock the bootloader? Please me help bro
Click to expand...
Click to collapse
Hi, try to flash the .img files from the fastboot stock rom whit cdm in fastboot, one by one, some files will give error but skip that, then reboot the phone as normal, it should work.
example:
fastboot flash boot boot.img
fastboot flash cust cust.img
etc.
jholfran3 said:
Hi, try to flash the .img files from the fastboot stock rom, one by one, some files will give error but skip that, then reboot the phone as normal, it should work.
Click to expand...
Click to collapse
If it were that simple, it would have been known for a long time.
You have already posted about this (post#14).
NOSS8 said:
If it were that simple, it would have been known for a long time.
You have already posted about this (post#14).
Click to expand...
Click to collapse
I had a Mi 9T and by mistake I installed a recovery that didn't correspond to it, the phone got bricked, and the only way to save it was like this, I searched and read everywhere but I couldn't find a solution, flashing the .img files was my idea, I didn't know if it would work but it did.
:V
jholfran3 said:
I had a Mi 9T and by mistake I installed a recovery that didn't correspond to it, the phone got bricked, and the only way to save it was like this, I searched and read everywhere but I couldn't find a solution, flashing the .img files was my idea, I didn't know if it would work but it did.
:V
Click to expand...
Click to collapse
To install a recovery, the bootloader must be unlocked.
I accidentally installed the wrong ROM on my phone, and now it's unresponsive (nothing happens when I try to turn it on, not even a vibration)
But I managed to access Download Mode (aka EDL, right?).
Can I restore it if I have the Scatter file and the Stock ROM?
Thanks in advance
MediaTek devices have preloader mode, EDL mode is for Qualcomm
Not sure what device you're talking about, but try to look for an "unbrick tool" or an "unbrick guide"
I "semi hard-bricked" my OnePlus 3T a while ago, and there was this leaked Qualcomm tool that you could use to flash the factory ROM the phone came with from Download Mode.
aIecxs said:
MediaTek devices have preloader mode, EDL mode is for Qualcomm
Click to expand...
Click to collapse
Does the fact that I can communicate and flash via Download Mode (SP Flash Tool) mean that I didn't lose my preloader? I'm kinda stuck trying to flash the Stock ROM (demanding verified image files, even though I'm using the original firmware for flashing... probably)
Lada333 said:
Not sure what device you're talking about, but try to look for an "unbrick tool" or an "unbrick guide"
I "semi hard-bricked" my OnePlus 3T a while ago, and there was this leaked Qualcomm tool that you could use to flash the factory ROM the phone came with from Download Mode.
Click to expand...
Click to collapse
I'll check the guides online, hopefully I'll find one that'll help.
mouradsme said:
demanding verified image files, even though I'm using the original firmware for flashing
Click to expand...
Click to collapse
I've also had issues previously with trying to flash stock images on Samsung phones. Not sure if you have country-specific images, if you do, try giving all of them a shot. I'm from Hungary, and a locally bought Samsung phone only came to life after flashing a Spanish factory image.
you need to (by)pass SLA/DAA authentication
Now I managed to bypass protection, and got the successful flash message from SP Flash Tool.
But I still can't solve the issue (Phone still only responsive from BROM)
For reference I'm using the global version of RMX3171 (Realme Narzo 30A) based on MT6768, and the Stock ROM is available online.
I flashed every partition (Provided in the Stock ROM), and Now it is booting, showing the logo + a message "Download not completed Error Code 0x992566 " and then it reboots after a minute or so -_-
I think that means you did not flash all partitions (some not included in Download)
In the other thread someone mentioned "Format All + Download" very bad idea never do this.
did you try unlocking bootloader from mtkclient like suggested in that thread?
mouradsme said:
Hello,
Can someone share their nvdata & nvram + oppo_custom?
I seem to have formatted mine, and need them to recover my Narzo 30A.
Click to expand...
Click to collapse
https://androidmtk.com/use-sn-write-tool
https://www.hovatek.com/forum/thread-116.html
aIecxs said:
https://androidmtk.com/use-sn-write-tool
https://www.hovatek.com/forum/thread-116.html
Click to expand...
Click to collapse
I came across the tool, but I failed to enter into Meta Mode.
I'm trying to make my phone boot to the system, then I'll try restoring my IMEI's using MTK Engineering app.
Thanks for links though
mouradsme said:
I accidentally installed the wrong ROM on my phone, and now it's unresponsive (nothing happens when I try to turn it on, not even a vibration)
But I managed to access Download Mode (aka EDL, right?).
Can I restore it if I have the Scatter file and the Stock ROM?
Thanks in advance
Click to expand...
Click to collapse
There is no such thing as a "hard bricked" device that can still boot into TWRP. A hard bricked device is completely dead and shows no kind of activity or function. It won't charge, it won't boot into any kind of mode and can't make a connection to PC, makes no sound when connecting to PC and it won't appear in device manager when connected to PC.
A device that can boot into download mode but not its other modes is just a softbricked device.