Database Info

[Q] CM12 installed successfully... but it's not.

I recently built CM12 for d2tmo/d2lte (Samsung Galaxy S III SGH-T999/T999L) . The build process went fine, but the installation process... not so much.
I have attempted multiple times to install it. The following message is given when the install "finishes":
detected filesystem ext4 for /dev/block/platform/msm_sdcc. .1/by-name/system
(the above message repeats itself a second time)
script succeeded: result was [0.200000]
updating partition details...
...done.
Successful.
Click to expand...
Click to collapse
Rebooting brings me to the Samsung Galaxy S III splash screen, but nothing beyond that. THIS DOES NOT HAPPEN WITH CM11. Attempting to flash CM11 doesn't say anything about ext4, and it completes successfully. Rebooting brings you to the OS.
Device: Samsung Galaxy S III (d2tmo), TWRP 2.8.5.0.
Does anybody know anything about this message? I have searched for hours to no avail.

StealthBravo said:
I recently built CM12 for d2tmo/d2lte (Samsung Galaxy S III SGH-T999/T999L) . The build process went fine, but the installation process... not so much.
I have attempted multiple times to install it. The following message is given when the install "finishes":
Rebooting brings me to the Samsung Galaxy S III splash screen, but nothing beyond that. THIS DOES NOT HAPPEN WITH CM11. Attempting to flash CM11 doesn't say anything about ext4, and it completes successfully. Rebooting brings you to the OS.
Device: Samsung Galaxy S III (d2tmo), TWRP 2.8.5.0.
Does anybody know anything about this message? I have searched for hours to no avail.
Click to expand...
Click to collapse
The message is kind of normal and not a error. Shows up on other phones, too. Seems as something went wrong with building the rom. May be you can ask HERE how they did it.

LS.xD said:
The message is kind of normal and not a error. Shows up on other phones, too. Seems as something went wrong with building the rom. May be you can ask HERE how they did it.
Click to expand...
Click to collapse
I messaged a d2att dev to see his input, but I *might* have figured out the issue. I was using a custom local_manifests XML file since I was building this off my VPS. Apparently, some of the URLs in there were broken, and were causing certain hardware components to not download. I'm recompiling right now, and I'll report back later.

Fixed. It turns out that I forgot some of the vendor drivers as I mentioned above. Silly mistake.

Bricked new S6 Edge ... :(

Guys
I just having bad time..
I managed to brick s6 edge ..
I had 5.0.2 then tried to flash 5.1.1 and it failed it was giving me fail at start of flashing firmware .. now I downloaded some firmwares for s6 edge F version now it flashed but it is stucked on samsung galaxy s6 edge logo unded powered adroid and it won't move..
Any idea how to fix this ?
thnx

XDADEVX said:
Guys
I just having bad time..
I managed to brick s6 edge ..
I had 5.0.2 then tried to flash 5.1.1 and it failed it was giving me fail at start of flashing firmware .. now I downloaded some firmwares for s6 edge F version now it flashed but it is stucked on samsung galaxy s6 edge logo unded powered adroid and it won't move..
Any idea how to fix this ?
thnx
Click to expand...
Click to collapse
Hi XDADEVX,
Have you tried Samsung Kies? Last time this sort of thing happened to me, I used samsung kies plugged phone into computer and used the factory backup reset, typed in my serial number from the box my S6 Came in and boom, 30 minutes later stock rom installed, but this locked the bootloader again so had to unlock and re install a custom recovery.

XSuperDan said:
Hi XDADEVX,
Have you tried Samsung Kies? Last time this sort of thing happened to me, I used samsung kies plugged phone into computer and used the factory backup reset, typed in my serial number from the box my S6 Came in and boom, 30 minutes later stock rom installed, but this locked the bootloader again so had to unlock and re install a custom recovery.
Click to expand...
Click to collapse
when i type serial number it it says cannot be verified ,...

Strange are you typing it in correctly, Have a little google around for what a S6 Serial Number looks like and you should be okay.

XSuperDan said:
Strange are you typing it in correctly, Have a little google around for what a S6 Serial Number looks like and you should be okay.
Click to expand...
Click to collapse
Well managed to bring edge to life .. after staying last night till 3:00 AM solving nothing and now one guy said he had brick and he flashed TWRP then he flashed this custom rom : http://forum.xda-developers.com/gal...g925-g920-uni-stock-odexed-ambasadii-t3205588
then i had damaged memory storage or something so I wiped all everything possible in TWRP and flashed ROM again wiped again everything after (except system) and god blessed me it booted ...

XDADEVX said:
Well managed to bring edge to life .. after staying last night till 3:00 AM solving nothing and now one guy said he had brick and he flashed TWRP then he flashed this custom rom : http://forum.xda-developers.com/gal...g925-g920-uni-stock-odexed-ambasadii-t3205588
then i had damaged memory storage or something so I wiped all everything possible in TWRP and flashed ROM again wiped again everything after (except system) and god blessed me it booted ...
Click to expand...
Click to collapse
Good! Im glad your back up and running

[ERROR] I535 4.4.2 system software not authorized by verizon wireless

Hello major Android world. I come to ask for help about a problem that occurred at my Android phone Galaxy S3 I535 4.4.2 (I535VZWDNE1) . Last time I wanted to go through rom manager pro to install CWM above. Obviously the TOUCH release was offered to me. And once accepted, there was an error when downloading this one. I repeat this action several times but the error still occurs. I finally installing the CWM (no touch). Once the phone start in recorvery I get a message like :
<<system software not authorized by verizon wireless galaxy s3 >>.
Help me solve this problem. well thank you to all
Sent from my SCH-I535 4.4.2

torskint said:
Hello major Android world. I come to ask for help about a problem that occurred at my Android phone Galaxy S3 I535 4.4.2 (I535VZWDNE1) . Last time I wanted to go through rom manager pro to install CWM above. Obviously the TOUCH release was offered to me. And once accepted, there was an error when downloading this one. I repeat this action several times but the error still occurs. I finally installing the CWM (no touch). Once the phone start in recorvery I get a message like :
.
Help me solve this problem. well thank you to all
Sent from my SCH-I535 4.4.2
Click to expand...
Click to collapse
You can't solve this problem. You are on 4.4.2, the bootloader on your phone is locked, and it cannot be unlocked. You cannot install CWM or any other custom recovery. Your only option is safestrap and a couple of ROMs you can flash if that is your end goal. There is a safestrap thread here in the Galaxy S3 forum. Find it and you can read up on it. For starters, you may have to flash the full 4.4.2 factory tar file in ODIN.

Deleted my OS

Help i accidentally deleted my operating system on my Samsung Galaxy S6 SM-G920F
I have tried flashing the original firmware with odin but it always seems to fail the same way and says
NAND Write
FAIL!!
i have also tried flashing roms like Cyanogen 12 and a unofficial 13 version with TWRP which is installed but this always fails as well
I would really appreciate if someone could help i am quite desperate

luka1745 said:
Help i accidentally deleted my operating system on my Samsung Galaxy S6 SM-G920F
I have tried flashing the original firmware with odin but it always seems to fail the same way and says
NAND Write
FAIL!!
i have also tried flashing roms like Cyanogen 12 and a unofficial 13 version with TWRP which is installed but this always fails as well
I would really appreciate if someone could help i am quite desperate
Click to expand...
Click to collapse
Use latest Odin (v3.11.1)
try another USB port
Check the model number again
Always flash the latest firmware.

or you can try smart switch -> emergency recovery.
Just calm down, reboot PC, start everything from fresh and do not hurry!

S6 SM-G920f stuck on samsung logo after trying to install xposed framework

hey all
I did a basic root on my samsung galaxy s6 a few days ago. just installed superSu and gave me root access. after that I installed TWRP which I then used to try and install the xposed framework. From then on my phone is stuck on the samsung screen saying kernel is not seandroid enforcing. I downloaded the stock rom for my phone (sm-g920F on 6.01) and attempted to flash it via odin 3.07 but it always failed after the sboot.
i have searched to try and find a solution but nothing I can find will work. can anyone help?

so i got my s6 working after flashing a full stock firmware i found via a link on this forum (i forget which one...sorry)
it gave me BL_G920FXXU3DPBG_CL7086820_QB8626574_REV02_user_low_ship.tar.md5
AP_G920FXXU3DPBG_CL7086820_QB8626574_REV02_user_low_ship.tar.md5
CP_G920FXXU3DPB6_CL7086820_QB8569466_REV02_user_low_ship.tar.md5
CSC_BTU_G920FBTU3DPB1_CL7140831_QB8460122_REV02_user_low_ship.tar.md5
it also recommended that I flash the pit file ZEROFLTE_EUR_OPEN.pit.
this was all done via the latest version of odin. initially, the flashing failed at cm.bin so I reflashed omitting the bootloader and all seemed to be well.
My phone set up fine and then I realised that it will not recognise my sim...or any sim for that matter. in settings under sim card status...every entry is listed as unavailable. IMEI is unknown as is baseband version.
i realise that I have obviously messed up big time with the initial flashing (uhuh....backup...backup....backup) but I would really like some help to get my phone back up and running as a ...well...phone.
any help or suggestions would be most appreciated.
thanks in advance x

vickstew2000 said:
so i got my s6 working after flashing a full stock firmware i found via a link on this forum (i forget which one...sorry)
it gave me BL_G920FXXU3DPBG_CL7086820_QB8626574_REV02_user_low_ship.tar.md5
AP_G920FXXU3DPBG_CL7086820_QB8626574_REV02_user_low_ship.tar.md5
CP_G920FXXU3DPB6_CL7086820_QB8569466_REV02_user_low_ship.tar.md5
CSC_BTU_G920FBTU3DPB1_CL7140831_QB8460122_REV02_user_low_ship.tar.md5
it also recommended that I flash the pit file ZEROFLTE_EUR_OPEN.pit.
this was all done via the latest version of odin. initially, the flashing failed at cm.bin so I reflashed omitting the bootloader and all seemed to be well.
My phone set up fine and then I realised that it will not recognise my sim...or any sim for that matter. in settings under sim card status...every entry is listed as unavailable. IMEI is unknown as is baseband version.
i realise that I have obviously messed up big time with the initial flashing (uhuh....backup...backup....backup) but I would really like some help to get my phone back up and running as a ...well...phone.
any help or suggestions would be most appreciated.
thanks in advance x
Click to expand...
Click to collapse
Try smart switch. Not sure if it could restore the imei but it could bring the phone back to original csc when you bought it.
Sent from my SM-G925F

Rosli59564 said:
Try smart switch. Not sure if it could restore the imei but it could bring the phone back to original csc when you bought it.
Sent from my SM-G925F
Click to expand...
Click to collapse
i had tried several times to connect to smart switch but it would not recognise my phone. after a lot of faffing about I finally managed to get it to do an emergency recovery and all seems well so far. it even restored my imei number so thanks for that suggestion Rosli. much appreciated xx

When u install xposed did u ude the special wanam version of the framework

Would say whipe cashe and wait a little while for stock roms like 40 minutes after first time install