Hello,
I'm running the samsung galaxy a8 (2018) canada version, so sm-a530W
Recently tried installing twrp, everything was looking okay, i booted up got to regular booting and accessing the phone, then i powered it off and powered it back on and i'm stuck at Downloading mode only.
What are my options here? I can't seem to boot into twrp now either or flash it again, seems to go back to download mode regardless
Hm actually so I just went into odin and flashed twrp again but let it auto-reboot this time and it lets me get through to my twrp and system but turning it off again leads it back to downloading mode, do I need to reflash a boot image and where do I get one?
Realized I may not have turned on USB debugging when I installed twrp, is that what's causing all these issues? and how would I best resolve this
After installing TWRP you have to treble-ize your phone. For this, reboot into TWRP with the given option. Then flash TWRP treble so you avoid getting locked out. Details of the procedure in this thread. Depending on your android version steps might be different so make sure to read everything and follow it carefully.
Related
Hi
This is really frustrating. I own many Samsung devices and never had any issue installing twrp, so I am not a noob when it comes to firing up Odin and flashing the image however I am stuck with this device.
I used couple guides with no success. ;( I cant get rid of the Samsung recovery and replace with TWRP. Odin says success but that is just a lie.
I tried both the lollilop bootloader and the older one then TWP with various versions (3.1x , 2.8.x) No luck.
Can anyone please provide me "working files" with "simple steps" in case I am missing out on some minor details. This is SM-P900 Kitkat 4.4.2 version.
- I flash the bootloader using the BL slot in dl mode
- I reboot to downloader again and and install TWRP
- I type adb revoot recovery
Boom, I am back to frigging Samsung recovery
Hi ,
This is a follow up
The only guide that worked for me is this one. It might be helpful to others.
https://forum.xda-developers.com/ga...guide-install-official-lollipop-p900-t3154362
I had trouble getting TWRP to take at first too. It seems Samsung overwrites the recovery upon rebooting so even though TWRP flashed successfully it just gets overwritten when the system restarts. The simple solution for me was to disable the Reboot option in Odin, install TWRP, manually shut down and then enter Recovery mode. Hope that helps. I came across this suggestion either in the thread linked to above or while googling.
Im installing into properly rooted and I have twrp 2.8.7. I want 3+ TWRP.
I flash with PDA/AP and with "autoreboot" unchecked. I power off and power+home+volUP for recovery.
Tablet enters a "enttering recovery" bootloop which can be only disrupted by going into power+home+volDWN to enter Download, and than I can flash with ODIN 2.8.7.
2.8.7 is the latest I can boot into. WHAT IS WRONG?!!!!!!!!! I lost hope, with flashing 100x
Did you try updating TWRP from inside TWRP?
Sent from my Samsung SM-P900 using XDA Labs
try do a full wipe from stock recovery . after that flash twrp selecting the ap and bl in ODIN twrp3.1....tar booth of them (AP & BL)
no no no i tried everything. but than I found out this post : https://s4.postimg.org/s3pel2ekd/this_guy.png and that solved the day!!
With p900 work perfect, but install hard. With this twrp 3.1 i install lineage 14.1, all works good.
Hello,
I just flashed the latest ROM for the S8+ (AQL5) and that went well.
Afterwards I tried to flash TWRP, but now the phone is stuck on the Samsung screen.
I then followed the guide I found here to use the BL file of AQF7 in Odin and spam the Start button so I managed to get into TWRP.
Question is, what do I do next? I restart the system it's the same problem all over again.
No one explains anywhere what to do in TWRP to save the phone.
Can I remove TWRP or somehow save the phone (without wiping my data)
Please help
Can you get to download mode? Then go to ODIN and redo your flashing of the OS and then TWRP. After the flash of TWRP, immediately boot into TWRP, and do Verity if you want that, and your root, if not already done. Clear Dalvik/cache and reboot to system.
It is not uncommon for folks, following TWRP flash, to get stuck in boot loop, unfortunately. Can take a little time, but you will get through it and finally to System.
But I thought all new firmware versions are incompatible with TWRP and cause this error.
I might try to install TWRP again if I flash the latest compatible version (I think it's the F7 one).
Does "Verify" in TWRP make that annoying "Your phone is not verified" message go away? The only option is to Reset phone when that thing comes up and I don't want to do that.
I managed to get out of that by reflashing the AQL5 version and just not installing TWPR.
Kind of scared to retry because everything goes wrong when I try to follow the guides on here or youtube
nkomp18 said:
But I thought all new firmware versions are incompatible with TWRP and cause this error.
I might try to install TWRP again if I flash the latest compatible version (I think it's the F7 one).
Does "Verify" in TWRP make that annoying "Your phone is not verified" message go away? The only option is to Reset phone when that thing comes up and I don't want to do that.
I managed to get out of that by reflashing the AQL5 version and just not installing TWPR.
Kind of scared to retry because everything goes wrong when I try to follow the guides on here or youtube
Click to expand...
Click to collapse
Would you please provide the info from my first post? and Exynos of Snapdragon?
JeffDC said:
Would you please provide the info from my first post? and Exynos of Snapdragon?
Click to expand...
Click to collapse
I have Exynos - model SM-G955F
Yes I can go to download mode but I won't do the things you ask because they're guaranteed to soft-brick the phone again and I have it working now
i have the same problem, followed this guide https://forum.xda-developers.com/galaxy-s8/how-to/guide-how-to-root-galaxy-s8-crgh-rom-t3846009 managed to get to TWRP no problems, once i reset the device though im stuck at the samung galaxy s8+ boot screen and can't get it off
any suggestions ? i did try to search but this old thread was the only relevant one i could find
stuck on boot screen after flashing twrp for magisk manager
i flashed magisk manager in twrp youtube.com/watch?v=r3R9kiBIx34 by this and now not booting to android . before i had this i reflashed miui 11 using official software and coulnt be sucess this time also please help me any one . my mobile is redmi 6 pro.:crying::crying::crying::crying:
Ok so i did the following in this order.
Installed twrp 3.3.1.0 via odin which worked perfectly.
Installed lineage os 17.1.
Installed no verify.
Installed gapps.
Had it all up ad running perfectly fine for a few weeks.
I decided to try a different os called pixel experience which i also got running just fine.
However i didn't like it and decided to go back to lineage os.
I used the exactly the same steps i used previously to wipe the system os inside twrp.
however when i tried to wipe the data it failed and then my phone auto rebooted and now i can't do anything.
It wont charge so needs to be plugged in to even turn on.
Once its plugged in it auto boots to a twrp splash screen and is stuck there and cant get into the twrp menu do install an os.
I can get into the download mode and odin detects the phone so i tried reinstalling twrp which says it was successful but when i reboot it gets stuck in the same splash screen.
i also tried reinstalling the original bl ap cp csc files that i had previously had installed which after many attempts finally go them to install but still loads the twrp splash screen and gets stuck there.
ive tried using adb fastboot loader using cmd but it doesn't detect the device so cant do any that way at all
i fear my phone is completely bricked and unusable please if you can offer any help would be much appreciated as im at the point where im looking to buy another phone as this is my old phone atm.
HI
Can't you come back to the last official firm for our S7 ?
It is an Oreo 8.0.0 firm
Have a look at samfirm ( or updato) and search for GF930FXXS8ETC2_xxx.zip
U flash that with Odin ( 3.13.1 I think) and yr phone is back to life !!!
Hope this helps
How can in get out of this boot loop, any advice, answers, help appreciated?
As background my Lenovo Tab 4 10 plus (stock 7.1 rom) had a failed SD card so I replaced the card and factory reset and thought I would try TWRP, Linageos 17.1 with magisk and relevent gapps - this all worked fine other than a Skype issue. I then found an 18.1 rom and tried that and this is where it seems to have gone wrong I set it up in the same ways as the 17.1 rom but with Andriod 11 gapps to suit, did a factory reset and 30 seocnds in I got the boot loop.
To fix it I tried going back to the 17.1 rom set-up that had worked but this then boot looped even with a full recovery reset. I have gone back to the stock rom backup in TWRP again with a recovery reset same boot loop. I have even used the Lenovo recovery tool to EDL mode flash a newly downloaded stock rom and it's still boot looping. I can only think that the 18.1 andriod 11 rom changed something fundimental but I can't find what?
Further I have another problem, the EDL flash worked but it locked the bootloader, however as I can't get in to Andriod with the boot loops, I can't switch ADB mode on so I can't unlock the bootloader to get TWRP up again.
So is there a way to start ADB without access to develeoper settings maybe through fastboot or recovery which I can get in to? Unlock the bootloader without ADB? Does anyone know why after the 18.1 Andriod 11 based rom, I have this continous boot loop?
I have a tb-x704f wich was totally caught in a boot loop, but I manisched to get back to working stock.
I was running firmware s000056 when I flashed twrp without backing up anything. I thought I never would have to go back to nougat, but standby time on lineage os was just not good for me, as I only use my tablet maybe half an hour a day, and I had to charge several times a week nevertheless.
So I tried to get back to stock and awesome standby time.
It was not easy bootloop after bootloop.
Tried Lenovo rescue and smart assistant multiple times, factory reset before and after flash, without SD card inserted etc, but bootloop.
Tried flashing the rom downloaded from the rescue tool with qfil but same result.
I then tried flashing the files with miflash 2016.08.30.0 still the same rom as I thought it had to be s000056. Miflash stopped halfway with some kind of error.
I then downloaded a stock rom from lenovo-forums.ru http://lenovo-forums.ru/topic/24135-lenovo-tab4-a10-plus-proshivka-tb-x704f_s000037_170703_row_qfil/
from the link in the discussion in the bottom of the site.
I had twrp still so from there I got into terminal and wrote "reboot edl" to get into emergency download mode and then flashed away. I presume that I could just as well had gotten in to edl mode by pressing vol+ and vol- simultaneously and then connected to PC holding those to buttons pressed. When the tablet was finished it was off, so I started going to recovery and wipeed cache and did a factory reset. Then booted and instead of bootloop it showed the Lenovo screen with a progress bar underneath. I successfully booted and took a update and then i am back to stock s000056.
The rom I got from lenovo-forums.ru stated it was only for EU and wi-fi model only. I am in Denmark and my tablet is WiFi only.
I think chances for success is greater using miflash than other tools when recovering from bootloop, but then again I don't know. Maybe I could just have flashed the s000037 rom with qfil or maybe I was just lucky, who knows.
But this what worked for me.
I hope this can help someone as I could not with the help of god find any useful help regarding this problem.
pallep said:
I hope this can help someone as I could not with the help of god find any useful help regarding this problem.
Click to expand...
Click to collapse
Thanks kind man You helped finish my struggle!
The only thing I want to add is that the ROM from the original link is no longer available, so I found the correct ROM using Google from the original filename here https://firmware247.com/lenovo-tab4-a10-plus-tb-x704f-firmware/
Hi all
I'm having big troubles with my Galaxy S10e.
Initially I wanted to install the Pixel Experience ROM but I'm not getting anywhere...
To do so I figured I would install TWRP to flash the ROM via Heimdall afterwards and already there I'm running into problems.
It seems that I can only flash the TWRP version 3.6.0_9-3. Any other version will fail in Odin, don't know why because the log does not say anything helpful.
But the bigger problem is that once I install that version of TWRP the phone keeps booting into download mode.
The only way to fix it, is to flash the stock ROM and start over again, only to end up at the same point.
I am completely lost and out of ideas...
The phone is OEM unlocked, USB debugging is enabled and the bootloader is unlocked.
Does anybody have an idea how I can get a custom recovery onto the phone without it going into bootloop ???
Thanks in advance !!
Edit: Managed to install the newest version of TWRP but still run into bootloop to download mode.... aaaaaaaarghh