Database Info

Rooting MIUI 10.2.1.0 on global device and rom?

I've read about some bug on the latest MIUI that makes Magisk bootloop, but I don't know if that means we cant currently root. Any help is appreciated

Spaghetticus said:
I've read about some bug on the latest MIUI that makes Magisk bootloop, but I don't know if that means we cant currently root. Any help is appreciated
Click to expand...
Click to collapse
Chinese ROM on global phone will give you bootloop, probably other way around as well

What if I'm on a global device on its stock software?

Spaghetticus said:
What if I'm on a global device on its stock software?
Click to expand...
Click to collapse
Should be fine. If it bootloops just uninstall magisk

Mackay53 said:
Should be fine. If it bootloops just uninstall magisk
Click to expand...
Click to collapse
So just install magisk through twrp? On latest MIUI?
Oh, it shouldn't wipe my phone right? Sorry just came back to Android after several months.

Install magisk 17.3 via TWRP, work fine.

Spaghetticus said:
So just install magisk through twrp? On latest MIUI?
Oh, it shouldn't wipe my phone right? Sorry just came back to Android after several months.
Click to expand...
Click to collapse
No need to wipe, either go to twrp - advanced - install root OR flash the magisk 17.1 or 17.3 zip.

Hey guys, I am very new to Android since i switched from iPhones now to the Mi Mix 3 (EU Version). I unlocked the bootloader already and have the adb drivers installed and when I try to boot into TWRP using "fastboot flash recovery TWRP.img" into "fastboot boot TWRP.img" it will boot back into MIUI. I also tried some methods mentioned in various forums like
"1. Put phone in the fastboot mode (switch it off, then press and hold power + volume down for a couple of seconds)
2. Flash twrp through fastboot (fastboot flash recovery twrp.img)
3. Boot TWRP (fastboot boot twrp.img)
4. When phone screen become black, hold power + volume up until it vibrate then release all
5. The phone will boot into twrp "
but I never get the phone to go into the TWRP recovery mode. It either boots back into MIUI or into the MIUI Fastboot screen. Has anyone an idea? Should I try to reinstall the drivers or what could be the issue?
Thanks a lot in advance!!

Flashing TWRP
I had a similar issue (could not boot into recovery after flashing TWRP)
Rename twrp.whatever.img to "recovery.img", then,
fastboot flash recovery recovery.img

Magisk 19 works perfect also

[Recovery][TWRP]CC9/Mi9 LITE TWRP-3.3.1-0709/ 3.3.1-1117 Android 9/10

Hello good news!! |
First recovery for CC9
Download
Android 9 MOD EDIT: DOWNLOAD LINK REMOVED
Android 10 MOD EDIT: DOWNLOAD LINK REMOVED
How to flash:
1. Unlock BL
2. Reboot to bootlader
3. Flash in adb twrp.img and misc.bin
command:
Fastboot flash recovery twrp.img
Fastboot flash misc misc.bin
Fastboot reboot Press Vol+ and ENTER
4. In recovery
First Format Data >yes
Reboot recovery
Flash custom rom like Xioami.eu/ MI-Globe ,
Flash Magisk
Flash DecScript zip then reboot

no fastboot under windows 10, may be the wrong drivers, under windows 7 it works

Built in recovery
can anybody give the built in recovery.img of mi cc9

works well on my cc9, thx~

Radzią said:
Hello good news!! |
First recovery for CC9
Download MOD EDIT: DOWNLOAD LINK REMOVED
How to flash:
1. Unlock BL
2. Reboot to bootlader
3. Flash in adb twrp.img and misc.bin
command:
Fastboot flash recovery twrp.img
Fastboot flash misc misc.bin
Fastboot reboot recovery
4. In recovery
First Format Data >yes
Reboot recovery
move this zip to phone storage and flash
flash custom rom like Xioami.eu
Click to expand...
Click to collapse
It's asking for data decryption everytime I boot into the recovery.
I did all the steps and installed xiaomi.eu rom. rom works perfectly. but only recovery asking for decryption everytime, is this normal?

aseferfan said:
It's asking for data decryption everytime I boot into the recovery.
I did all the steps and installed xiaomi.eu rom. rom works perfectly. but only recovery asking for decryption everytime, is this normal?
Click to expand...
Click to collapse
Create a backup, foramt data flash rom and flash new decrypt method in main thread. let me know if there method works:angel:

How to use miui 11

Where can I get misc.bin? No link provided. Thanks.

juvjunior said:
Where can I get misc.bin? No link provided. Thanks.
Click to expand...
Click to collapse
Everything what you need is in the recovey ZIP.

keep booting into recovery instead of system, using cc9 Meitu (vela)

eidrag said:
keep booting into recovery instead of system, using cc9 Meitu (vela)
Click to expand...
Click to collapse
Because it is recovery for cc9

I'm getting this error while trying to back up. Any solutions?

amolpingle said:
I'm getting this error while trying to back up. Any solutions?
Click to expand...
Click to collapse
Insufficient storage mate. Try to used sdcard or delete some files in your internal.

v0ne said:
Insufficient storage mate. Try to used sdcard or delete some files in your internal.
Click to expand...
Click to collapse
Almost 70% is free. Storage cannot be the reason.

amolpingle said:
Almost 70% is free. Storage cannot be the reason.
Click to expand...
Click to collapse
Your data partition is probably encrypted. Flash ROM according to the instructions from OP....

Radzią said:
Your data partition is probably encrypted. Flash ROM according to the instructions from OP....
Click to expand...
Click to collapse
I've already flashed the eu rom using this recovery, there was no problem. The above issue is coming while trying to create a backup.

So I did as instruction and flashed MIUI EU Stable ROM. For some reason when setting up the phone, any PIN, password or pattern I set up is good to go. But can't use it to unlock the phone or inside setting, it will tell me that the password is wrong. I've factory reseted multiple times to make sure i got the password/PIN correct. And it won't let me set up fingerprints as well. So I did some reading and maybe the problem is because MIUI only allow setting up PIN/fingerprint when device is encrypted? and the last zip file decrypted the device?
Anyone can help me with this? Thanks!

amolpingle said:
I've already flashed the eu rom using this recovery, there was no problem. The above issue is coming while trying to create a backup.
Click to expand...
Click to collapse
for me copy works without any problem
Someone else has a problem making a copy?

earthscaper said:
So I did as instruction and flashed MIUI EU Stable ROM. For some reason when setting up the phone, any PIN, password or pattern I set up is good to go. But can't use it to unlock the phone or inside setting, it will tell me that the password is wrong. I've factory reseted multiple times to make sure i got the password/PIN correct. And it won't let me set up fingerprints as well. So I did some reading and maybe the problem is because MIUI only allow setting up PIN/fingerprint when device is encrypted? and the last zip file decrypted the device?
Anyone can help me with this? Thanks!
Click to expand...
Click to collapse
Try flash fastboot ROM via mitool and select clean all Without lock then flash recocery again and ROM

cc9 meitu edition (vela)
@Radzią
Hi, can you please make a twrp for cc9 meitu edition (vela)?
cc9 meitu version does not have any twrp or alternative rom. only chinese.
Alternatively, If you have the time, knowledge and motivation, maybe you can post a detailed tutorial on how you have created this twrp, [Recovery] TWRP-3.3.1-0709 XIAOMI_CC9-CN-wzsx150?
maybe I can try to port one myself based on your tutorial.
I have tried to port cc9 meitu twrp using many guides from the web, but did not succeed.
I uploaded the original recovery for cc9 meitu to here https://we.tl/t-NtcZIhWoiD
thanks.

[Guide] Flash Custom Rom (xiaomi.eu) and install Magisk On mi note 10 lite

Follow These methods (100% worked)
1. Boot to fastboot mode (power +vol down)
2. Extract ADB.rar to Drive C (Put the recovery and vbmeta files in ADB Folder) vbmeta link Below
3. Connect Phone To PC with USB Cable
4. from Start run CMD and type cd:\adb (pres enter) And type the following Commands :
fastboot devices
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot flash recovery Twrp-3.4.2B_toco_by.alex.msk1407.img (you can rename it to twrp.img) -LINK BELOW (Many Thanks To Alex msk)
fastboot reboot recovery
5. in twrp: wipe-> format data -> Type yes and tap enter (blue key)
6. Copy xiaomi.eu rom and magisk.zip to phone
8. in twrp: install rom and magisk.zip
9. in twrp: Boot to recovery (the phone is restarting to twrp again)
10. in twrp: reboot system
12. Enjoy
ADB Link :
https://mega.nz/file/x8whTZSa#UP7UvnDO7rsuefBWb1meUd4iZZXMJBHIDUa1lMnQXNI
TWRP Link :
https://mega.nz/file/0lAywALA#hx6U3_xgW3fpndSR0OWsRBxEncQ9CGQb2ezMOAldTRQ
3.4.0-14 TWRP Link:
https://forum.xda-developers.com/mi...overy-unofficial-twrp-xiaomi-mi-note-t4107209
vbmeta Link:
https://mega.nz/file/t4QmXACT#hqN6TNDt2mlAPrQUnClGtmaCvWJR3eO3TRAa8I4JhGk
Magisk Link :
https://mega.nz/file/Y4BEBILD#kre2gRvSJgwJRto1Yg-o7gblTRXAftUGxJSoKNowWkI
xiaomi.eu 12.0.3 Rom Link (Updated):
https://sourceforge.net/projects/xi...e10LITE_V12.0.3.0.QFNMIXM_v12-10.zip/download

thank

thanks and good to see, that the mi note 10 lite has it own section now. hope there will come a lot of custom things.

Does Gpay work with bootloader unlocked and xiaomi.eu rom?

is the widevine L1 working?
is the hdr working

For installing updates, do we need to follow the dirty flash process via TWRP? I tried via the updater but the process simply restarts mobile and nothing happens.

New version of Xiaomi.eu ROM is out.
Question is how to updtae without losing data?

What's the problem? The test TWRP from mauronofrio can't decrypt data? Sry for the questions, I have not tested it yet

eugenwollekneul said:
What's the problem? The test TWRP from mauronofrio can't decrypt data? Sry for the questions, I have not tested it yet
Click to expand...
Click to collapse
Yes, cant decrypt -> probably can't update.
Even if you do use OTG to read the .zip...
Will it overwrite to encrypted partitions? Won't that break the system?
Or
Will it boot fine - but will the updated ROM be able to read the probably still encrypted user data?

maxlieb said:
Yes, cant decrypt -> probably can't update.
Even if you do use OTG to read the .zip...
Will it overwrite to encrypted partitions? Won't that break the system?
Or
Will it boot fine - but will the updated ROM be able to read the probably still encrypted user data?
Click to expand...
Click to collapse
I have a Redmi note 8 with xiaomi.eu but I think I can help you. In order to update you flash the new zip. It just overwrites the system partition not the data. And you are still able to decrypt them. There is no problem I tried it. You will have to reflash magisk although.But in case anything goes wrong just format data and you will be fine.

PinkNinja said:
I have a Redmi note 8 with xiaomi.eu but I think I can help you. In order to update you flash the new zip. It just overwrites the system partition not the data. And you are still able to decrypt them. There is no problem I tried it. You will have to reflash magisk although.But in case anything goes wrong just format data and you will be fine.
Click to expand...
Click to collapse
There`s a new twrp that decrypts everything so no more problem anyway

is this twrp fully working? or does it have the same problems as mauronofrio's Twrp 3.3.1.0?

Ahmed Hesham said:
is this twrp fully working? or does it have the same problems as mauronofrio's Twrp 3.3.1.0?
Click to expand...
Click to collapse
Yes it's fully working.
Στάλθηκε από το Mi Note 10 Lite μου χρησιμοποιώντας Tapatalk

Super weird... it didnt work for me... flashing was successful
but it keeps rebooting to fastboot mode.
While doing format data, i did receive an error message "unable to find /metadata" is that normal?
EDIT: So what happen is, I did all over again with slightly different steps
1) i reflashed official firmware to revive my phone
2) Once I'm able to boot on official ROM, I flash TWRP
3) Format Data + restart TWRP
4) Copied ROM and flash Xiaomi EU rom
5) Restart to system immediately after flashing ROM. Managed to boot Xiaomi EU rom.
6) Reboot to recovery and flash magisk
7) Restart to system, set up, and done.

Kediraksith said:
1) i reflashed official firmware to revive my phone
Click to expand...
Click to collapse
How you reflas official firmware?

andriej1974 said:
How you reflas official firmware?
Click to expand...
Click to collapse
I think he did it with the miflash tool. I had to do it so because I stucked in Fastboot mode.

I also had a problem with metadata. I have recovery aleks.msk, can enter fastboot but nothing else. Miflash does not work, uploading the firmware via recovery does not get up.

In fastboot mode copy latest xiaomi.eu zip (not the fastboot, the regular one)to the phone and flash it in twrp - reboot to system

Can anyone please post a link to Xiomi EU ROM. Can't find it. Thanks

RAMBO29 said:
Can anyone please post a link to Xiomi EU ROM. Can't find it. Thanks
Click to expand...
Click to collapse
In the First Post

Question No Idea on How to Root Redmi 8A Dual

Hi All,
I am trying to root my Redmi 8A Dual and nothing works. I previously have rooted Samsung, sonny and even Lenovo phones but this one seems really tough. When getting into recovery mode, I see just reboot and contact MI Assistance. on developer settings, I am unable to do the Mi Unlock Status ( seriously no idea what that does). tried Magisk manager, King Root and MI unlocker web but not working. I want to degoogle my phone and make it AOSP ROM in it.
Can I get assistance here please?

ArusChandran said:
Hi All,
I am trying to root my Redmi 8A Dual and nothing works. I previously have rooted Samsung, sonny and even Lenovo phones but this one seems really tough. When getting into recovery mode, I see just reboot and contact MI Assistance. on developer settings, I am unable to do the Mi Unlock Status ( seriously no idea what that does). tried Magisk manager, King Root and MI unlocker web but not working. I want to degoogle my phone and make it AOSP ROM in it.
Can I get assistance here please?
Click to expand...
Click to collapse
Below are the following steps which helped me in successfully rooting my RM8A Dual-
1. Install Pitch Black recovery for RM8A Dual via fastboot.
2. Once installed recovery successfully extract your boot.img via recovery.(Many videos are out there to do it.)
3. Patch you boot.img on the website mentioned in previous posts.
4. Flash the patched IMG via recovery then reboot into recovery again and flash magisk and voila you're rooted.

vineet allahabad said:
Below are the following steps which helped me in successfully rooting my RM8A Dual-
1. Install Pitch Black recovery for RM8A Dual via fastboot.
2. Once installed recovery successfully extract your boot.img via recovery.(Many videos are out there to do it.)
3. Patch you boot.img on the website mentioned in previous posts.
4. Flash the patched IMG via recovery then reboot into recovery again and flash magisk and voila you're rooted.
Click to expand...
Click to collapse
I shall try that and update you. Thank You !

ArusChandran said:
I shall try that and update you. Thank You !
Click to expand...
Click to collapse
Please update here if it works. I’m stuck at “Mi Unlock Status” too. Rooted Lenovo, Micromax, Samsung, Oneplus, Sony & older Redmi devices too, but stuck here and very few people are even active in this forum so.

Is there any custom rom for 8a dual? Please give link for download

ArusChandran said:
I shall try that and update you. Thank You !
Click to expand...
Click to collapse
Did this method worked? please inform

Pavan__pavan said:
Is there any custom rom for 8a dual? Please give link for download
Click to expand...
Click to collapse
No custom roms I have got yet

1. OliveLite Twrp official
https://twrp.me/xiaomi/xiaomiredmi8a.html
2.Pitch Black Olivewood official Recovery
Xiaomi Redmi 8A Pro/Dual | olivewood - PitchBlack Recovery Project
PBRP Version: 3.1.0 Maintainer: Aryan Sinha
pitchblackrecovery.com
These are some Custom Recoveries
OrangeFox Recovery is also available in official site
Flash Recovery from CMD,
then boot into recovery immediately and root the Device,
so that Recovery stays there as permanent
VBmeta image may end into Bootloop sometimes

Thanks for reply
Adityasalil95 said:
No Custom Rom i have got yet
Click to expand...
Click to collapse

Adityasalil95 said:
1. OliveLite Twrp official
https://twrp.me/xiaomi/xiaomiredmi8a.html
2.Pitch Black Olivewood official Recovery
Xiaomi Redmi 8A Pro/Dual | olivewood - PitchBlack Recovery Project
PBRP Version: 3.1.0 Maintainer: Aryan Sinha
pitchblackrecovery.com
These are some Custom Recoveries
OrangeFox Recovery is also available in official site
Flash Recovery from CMD,
then boot into recovery immediately and root the Device,
so that Recovery stays there as permanent
VBmeta image may end into Bootloop sometimes
Click to expand...
Click to collapse
Should I need to flash vbmeta and premessive_v5 immediately?
If yes then flashing same as other zip files?
Thanks for such quick replies

Pavan__pavan said:
Should I need to flash vbmeta and premessive_v5 immediately?
If yes then flashing same as other zip files?
Thanks for such quick replies
Click to expand...
Click to collapse
As far as I now I have never Tried VBMeta till now after this Issue,
VBmeta resulted into bootloop when I flashed it First time in olivewood phone
I had to Reflash the Miui Rom again from scratch to solve Bootloop issue ,
Any Senior person might know the correct VBmeta file

Adityasalil95 said:
As far as I now I have never Tried VBMeta till now after this Issue,
VBmeta resulted into bootloop when I flashed it First time in olivewood phone
I had to Reflash the Miui Rom again from scratch to solve Bootloop issue ,
Any Senior person might know the correct VBmeta file
Click to expand...
Click to collapse
Did you tried this?
Aghora7 said:
How to install GSI in REDMI 8A DUAL
Download ALL The Below Files First
Downloads :- Click on Orange Links
1.Flash TWRP Recovery
fastboot flash recovery recovery.img
fastboot flash vbmeta vbmeta.img
volume up and power button to reboot into twrp recovery
Goto wipe and type "yes" and reboot to recovery
2.flash boot image i provided using twrp and select "boot"
3.flash arm64 based system image
4.Goto advance wipe >> select system >> select repair and resize >> click on resize
5.flash vendor image and choose vendor option
6.Again Goto advance wipe >> select system >> select repair and resize >> click on resize
7.flash premissier_v5 zip
8.flash open gapps arm64 pico/nano
9.flash magisk 20.3 (Recommended) you can use 20.4 too
10. Goto wipe section and just swipe to right to Factory Reset.
Click to expand...
Click to collapse

Pavan__pavan said:
Did you tried this?
Click to expand...
Click to collapse
No I didn't try , Thank you for the link

Adityasalil95 said:
No I didn't try , Thank you for the link
Click to expand...
Click to collapse
Plese tell the result after flashing those in the link

Pavan__pavan said:
Plese tell the result after flashing those in the link
Click to expand...
Click to collapse
I have to wait 7 days to unlock bootloader

Pavan__pavan said:
I have to wait 7 days to unlock bootloader
Click to expand...
Click to collapse
Yaa have to wait 7 days or 365 hours to officially unlock the Bootloader
It also took long time for me to officially unlock Bootloader First time

How to root Redmi 8a Pro (Olivewood) :
- First you must us it firmware miui 11.0.4.0 android 9
- Install Magisk Manager stable 22.00 or Canary version
- Flash this patched_boot.img (Magisk) with fastboot
- Done...now Redmi 8a Pro is rooted with magisk
Download Patched_boot.img (Magisk) : https://drive.google.com/file/d/1AQVrrSY5CJhty5NHgZry1Wu5zN6OVmG3/view

vineet allahabad said:
Below are the following steps which helped me in successfully rooting my RM8A Dual-
1. Install Pitch Black recovery for RM8A Dual via fastboot.
2. Once installed recovery successfully extract your boot.img via recovery.(Many videos are out there to do it.)
3. Patch you boot.img on the website mentioned in previous posts.
4. Flash the patched IMG via recovery then reboot into recovery again and flash magisk and voila you're rooted.
Click to expand...
Click to collapse
Website not opening

Bontersoft said:
How to root Redmi 8a Pro (Olivewood) :
- First you must us it firmware miui 11.0.4.0 android 9
- Install Magisk Manager stable 22.00 or Canary version
- Flash this patched_boot.img (Magisk) with fastboot
- Done...now Redmi 8a Pro is rooted with magisk
Download Patched_boot.img (Magisk) : https://drive.google.com/file/d/1AQVrrSY5CJhty5NHgZry1Wu5zN6OVmG3/view
Click to expand...
Click to collapse
Plz post patched boot img for 8a dual olivewood 11.0.1.0

Question Well I Bricked my Poco X5 Pro after 1 week

Im trying to install generic TWRP
I successfully unclocked bootleader after waiting for a week
but i ran into partitition unknown error while flashing TWRP
now its on bootloop
Any help?

what command are u using to flash the image file?

Code:
fastboot flash recovery twrp.img
give an error - FAILED (remote: '(recovery_a) No such partition')
then i tried
Code:
fastboot getvar curent-slot
give me a
then i did
Code:
fastboot flash boot_a twrp.img
see the problem is there is no supported or officol twrp fpr poco x5 pro
So i tried poco x3 twrp

try this fastboot flash boot_ab twrp.img
this device already received unofficial orange fox recovery
Recovery For Redwood
ORANGEFOX Recovery For Poco X5 Pro
www.pling.com

It may be completely off target, but how about using the slot b side?

info

-

-

Muganz said:
info
Click to expand...
Click to collapse
hey, can you link me that telegram group?

scorthyn said:
hey, can you link me that telegram group?
Click to expand...
Click to collapse
there u go..
Poco X5 Pro | Redmi Note 12 Pro Speed | Official
Poco X5 Pro OFFICIAL Community • Read rules (/rules), English only • Channel: @PocoX5ProUpdate • Photography group: @PocoX5ProPhotography • Off-Topic group: @PocoOffTopic • Customization group: @PocophoneCustomization
t.me

I already rooted it without TWRP
I never really needed TWRP
I just needd the root.
I dont want to test broken Untested roms on it yet.
I just wanted to uninstall system apps
And unlock few settings thats it

Bilalll said:
I already rooted it without TWRP
I never really needed TWRP
I just needd the root.
I dont want to test broken Untested roms on it yet.
I just wanted to uninstall system apps
And unlock few settings thats it
Click to expand...
Click to collapse
How did you root it without twrp? Just using fastboot/adb with an unlocked bootloader I assume? Thank you.

Zylam Marex said:
How did you root it without twrp? Just using fastboot/adb with an unlocked bootloader I assume? Thank you.
Click to expand...
Click to collapse
First download device original rom from the redmi website
Unlock bootloader after registering ur phone
Unlock device from developers options
Wait for 7 days
Do what is required
Download magisk
Open original rom and copy boot. Img
Open magisk and patch the copied boot. Img
reply to this post after you reach here

Bilalll said:
First download device original rom from the redmi website
Unlock bootloader after registering ur phone
Unlock device from developers options
Wait for 7 days
Do what is required
Download magisk
Open original rom and copy boot. Img
Open magisk and patch the copied boot. Img
reply to this post after you reach here
Click to expand...
Click to collapse
Oh nice, thank you for the rapid response. Unfortunately I do not yet have a X5 Pro, I'm actually waiting for custom roms to appear, ever since Xiaomi baked gestures into the stock launcher I stopped buying phones until I could custom rom. Nova Launcher is a must for me and using it without gestures feels wrong. I was just curious as to how you rooted without a custom recovery. Very interesting you are using magisk on a different device to patch the boot image in the fastboot rom, which I assume you will flash using the mi flash. Is that what's happening? Thank you.

Zylam Marex said:
Oh nice, thank you for the rapid response. Unfortunately I do not yet have a X5 Pro, I'm actually waiting for custom roms to appear, ever since Xiaomi baked gestures into the stock launcher I stopped buying phones until I could custom rom. Nova Launcher is a must for me and using it without gestures feels wrong. I was just curious as to how you rooted without a custom recovery. Very interesting you are using magisk on a different device to patch the boot image in the fastboot rom, which I assume you will flash using the mi flash. Is that what's happening? Thank you.
Click to expand...
Click to collapse
No need to flash with mi flash after u patch it with magisk.
After magisk step
U will boot into fastboot and install the patched boot. Img
U may have 2
One is for fastboot rom
2nd is for recovery rom
Depends on the rom u falshed during flashing using mi flash tool
For fastboot u will use receovey comand
For bootloader rom u will use boot command while flashing boot. Img
Hope it will help u and others
Also yeah these are the silly things I wanted to root this phone. Navigation or lockscreen wallpaper suggestions or annoying box icons etc etc

Bilalll said:
First download device original rom from the redmi website
Unlock bootloader after registering ur phone
Unlock device from developers options
Wait for 7 days
Do what is required
Download magisk
Open original rom and copy boot. Img
Open magisk and patch the copied boot. Img
reply to this post after you reach here
Click to expand...
Click to collapse
im trying to install magisk. can u help me with steps 7 and 8. i dont really know what to do there. I found Global 14.0.6.0 but there are multiple links eg. fastboot/recovery which ROM to download?
is magic hide works? i want it to pass safetynet checks.
thx

Szajkop said:
im trying to install magisk. can u help me with steps 7 and 8. i dont really know what to do there. I found Global 14.0.6.0 but there are multiple links eg. fastboot/recovery which ROM to download?
is magic hide works? i want it to pass safetynet checks.
thx
Click to expand...
Click to collapse
Install magisk apk first
Go check ur Ramdisk Status
If its Yes
Download Fastboot rom
If no
Download recovery
After downloading the above
U will find boot. Img inside
Next is just going into fastboot mood
Run fastboot receovery command if ita receovery
Or
Run fastboot boot command if its fastboot
Check the exact commands on the good
Sorry for typos or bad explaination

Bilalll said:
No need to flash with mi flash after u patch it with magisk.
After magisk step
U will boot into fastboot and install the patched boot. Img
U may have 2
One is for fastboot rom
2nd is for recovery rom
Depends on the rom u falshed during flashing using mi flash tool
For fastboot u will use receovey comand
For bootloader rom u will use boot command while flashing boot. Img
Hope it will help u and others
Also yeah these are the silly things I wanted to root this phone. Navigation or lockscreen wallpaper suggestions or annoying box icons etc etc
Click to expand...
Click to collapse
If I'm not wrong, you can do these with the debloater via usb debugging

Bilalll said:
Code:
fastboot flash recovery twrp.img
give an error - FAILED (remote: '(recovery_a) No such partition')
then i tried
Code:
fastboot getvar curent-slot
give me a
then i did
Code:
fastboot flash boot_a twrp.img
see the problem is there is no supported or officol twrp fpr poco x5 pro
So i tried poco x3 twrp
Click to expand...
Click to collapse
sir how to fix, same for me

Muganz said:
what command are u using to flash the image file?
Click to expand...
Click to collapse
sir can you help me? same for me
after done the unlock bootloader, i flash rom but the problem is i bypass the platfirm tools, i did is..
got to cmd
c: \users\karen\Downloads\fastboot flash boot c:\users\karen\Downloads\orangefox.img
after this in the youtube "how to install orange fox" i turn off and volume up
then my phone is bootloop
then i flash again twrp recovery but it says error, now my phone is always in fastboot
do you know how to fix sir
thank you 🥹🥹