Related
Hi everyone,
I'm hoping you can help me. I've had a OnePlus One since August 2014, completely stock. Never modded it, never 'flashed' anything, never installed anything outside of the Google Play Store. Always installed the official OTA updates as they pop up on the phone itself. Basically a reeeeealllly boring android user!
So Thursday morning (09/06/2016) I got a notification that a system update was downloaded and ready to install. Clicked install, the process began, phone rebooted as per usual. However, on the install progress screen (the green android with the spinning cogs), about one third of the way through the phone freezes. About 20 seconds later the phone reboots itself and then tries to install the update again. Freezes. Reboots. Tries to install. Freezes. Reboots. Tries to install.... I think you get the idea. It was doing this for a couple of hours before I checked it.
I'm moderately tech-savvy but never really got involved with android modding, rooting or flashing. So I'm a bit confused as to why my completely stock phone is stuck in a bootloop after installing an official CyanogenMod OTA update. The current status of my phone is that I can only boot into Fastboot mode via VolUp + Power. I can get my computer to detect my phone in Fastboot mode, however it informs me that my bootloader is locked. Attempting to boot into recovery mode via VolDown + Power just starts the update install and enters the bootloop.
I've done some research in to flashing a recovery image or manually applying the OTA update. One problem I've noticed is that I have absolutely NO idea what version of Android / CM my device was at before the update, and I have NO idea what version it was trying to update to. I do know that it was some version of Marshmallow before it broke. I've had no issues with the phone before this, aside the occasional self-reboot.
I REALLY want to keep all my data (pictures, contacts etc.) and am very nervous about actually doing anything because I have very little idea as to what I'm really doing.
Can anyone offer any advice on how to get my phone to boot/update/recover through Fastboot with a locked bootloader and without losing any data?
Thanks,
Stormin'
AKA the "HOW DO I PLAY BOOM BEACH NOW?!" guy
Edit: I solved my issue. It might work for you too, permalink to my post (#9) below: http://forum.xda-developers.com/showpost.php?p=67278091&postcount=9
Are you able to get into recovery mode? If so, you should be able to just flash a new ROM. Sideload one using the adb push command, wipe your data (this will clear settings, apps, etc. DO NOT SELECT SD CARD - that will wipe your personal files including your photos). Then install. Hopefully it should all work fine.
If you can't access the recovery can you access the bootloader sceen (the one with the big green bugdroid)? Then I'd suggest using Fastboot to install a new recovery. Then try the above.
If you can't even get to that stage you're screwed, just like me (unless anyone has any ideas). I've had soft bricks many times before but today I can't even get to the bootloader screen. ADB says the phone is offline. The screen is back and flickers on for a split second every now and then. Bloody CM Updater.
As IBM9001 has said, if you can get into recovery - even being stock - you can still clear your cache - don't do a full factory reset, just the cache, this may help, but even if it doesn't it still rules out one option.
I can't access recovery mode, using the key combo it just boots straight into the installer.
I've got a support ticket open with OnePlus and a scheduled remote assistance tomorrow. However from the preparational email it looks like they are going to factory reset the phone and then clean install CM. They've instructed me to make sure that all my files are backed up... I assume this means I will lose them.
Is there ANY way just to access or pull the photos off my phone? That's the most important bit. Dropbox hit its storage limit at the beginning of 2015 and I refused to pay, so now I have 18 months worth of pictures that I have no other copies of on death row
The only thing I can access is Fastboot...
Edit:
ibm9001 said:
If you can't access the recovery can you access the bootloader sceen (the one with the big green bugdroid)? Then I'd suggest using Fastboot to install a new recovery.
Click to expand...
Click to collapse
I can boot into Fastboot mode, and plugging my phone into my PC works i.e. it is recognised. I have the fastboot .exe and USB drivers, and can issue commands to my phone through cmd such as
Code:
fastboot reboot-bootloader
which works.
How do I use a recovery .img through Fastboot? or can I pull the contents of the sd card through Fastboot?
Hey mate i had same problem with my friends phone. But in that case i was able to open recovery mode.. So if you can do that just download any full zip of opo.. Like cm12.1 or cm13. Then flash it without clearing data.. So will not loose amything not even a single application..
I did that by using adb sideload just google it how to use it. And for that download full android sdk toollit and then download only fastboot and adb domt download whole studio. Because somete old version of adb and minifastboot will not work on adb sideload... So good luck with that..
Hi guys,
I have the same issue!
If I flash a new recovery from fast boot will I lose my data on sdcard?
Thanks.
Sent from my iPad using Tapatalk
masterjigar said:
Hey mate i had same problem with my friends phone. But in that case i was able to open recovery mode.. So if you can do that just download any full zip of opo.. Like cm12.1 or cm13. Then flash it without clearing data.. So will not loose amything not even a single application..
I did that by using adb sideload just google it how to use it. And for that download full android sdk toollit and then download only fastboot and adb domt download whole studio. Because somete old version of adb and minifastboot will not work on adb sideload... So good luck with that..
Click to expand...
Click to collapse
I cannot boot into recovery mode, unfortunately
masterjigar said:
Hey mate i had same problem with my friends phone. But in that case i was able to open recovery mode.. So if you can do that just download any full zip of opo.. Like cm12.1 or cm13. Then flash it without clearing data.. So will not loose amything not even a single application..
I did that by using adb sideload just google it how to use it. And for that download full android sdk toollit and then download only fastboot and adb domt download whole studio. Because somete old version of adb and minifastboot will not work on adb sideload... So good luck with that..
Click to expand...
Click to collapse
I'm currently having a very similar issue, but my phone completed the update. It's just stuck in a reboot/"optimizing apps" loop. I can boot into recovery and I tried to clear cache, but It's still just optimizing apps then rebooting and optimizing again over and over. Do you think your suggestion would help me too?
Wooooo, I've fixed it! I don't know why what I did fixed the issue (probably bypassed something) but my phone is up and running again! First thing I'm doing is making a freakin' backup!
So I was just trying everything in desperation. So that others can attempt to fix the same problem, here's what I did:
1. State of phone was either boots normally and crashes when installing update, or boots into fastboot. Would NOT boot into recovery!
2. Booted into fastboot using key combo (hold Volume Up, then Power Button)
3. Attached phone to computer via data usb lead
4. Started up cmd console, used command "fastboot devices" to check that device was recognised (note you need the fastboot files and USB drivers etc., Google it if you're not sure)
5. Used command "fastboot continue" to continue with 'autoboot'. This rebooted my phone but skipped the installer and went to the 'optimising apps' stage. Left phone alone for a couple of hours but it got stuck in another bootloop optimising apps, rebooting, optimising apps and so on.
6. Turned phone off, then booted normally with just the power button. This started the update install again except it didn't crash, and completed the update install. Then it optimised the apps again (albeit with a different total app count) and once finished, phone starts up normally.
Thanks for all the suggestions everyone! Happy to have my phone back. Now to go through the half-dozen or so voicemails I've collected over these last few days... great.
Hi guys,
@stormin, congrats!
@masterjigar, so you didn't lose the data like photos etc. doing so?
I can boot to recovery, but can't connect by PC to it.
In fast boot mode my PC sees it as well as in dab sideload mode.
I haven't the boot loader unlocked then I have to do it first, right?
But cyanogen site says that unlocking the boot loader will wipe all the device data.
Is there any way get the photos and other files back?
Thanks.
From the FAQ:
Q4a: Can I flash ROMs or SuperSU or anything else with the stock recovery?
No, the stock recovery can only flash zips that are signed by CM, this means official updates only. You need a custom recovery to flash anything else.
Click to expand...
Click to collapse
Does it mean I can flash an official CM firmware without unlocking the boot loader?
Thanks.
hibernick said:
Hi guys,
@stormin, congrats!
@masterjigar, so you didn't lose the data like photos etc. doing so?
I can boot to recovery, but can't connect by PC to it.
In fast boot mode my PC sees it as well as in dab sideload mode.
I haven't the boot loader unlocked then I have to do it first, right?
But cyanogen site says that unlocking the boot loader will wipe all the device data.
Is there any way get the photos and other files back?
Thanks.
Click to expand...
Click to collapse
That's what adb sideload is all about. It will give you temporary adb access (which is always after unlocking bootloader and root). So you can also flash xip via sideload. Without losing data and media..
Same problem, Also PC not detecting my phone
Hey Guys, I am Stuck at the same thing at Bootloop. But to do anything further I need to connect my phone to the PC. I haven't been able to connect my phone to PC since the time I have got the phone. I tried all available drivers and even tried different cables. I dont know what has been left out to try.
If any one has a working driver pls share the link. Its been three days now that my phone is dead.
Pls help!!
Thanks in advance.
masterjigar said:
That's what adb sideload is all about. It will give you temporary adb access (which is always after unlocking bootloader and root). So you can also flash xip via sideload. Without losing data and media..
Click to expand...
Click to collapse
can I flash this cm-13.1-ZNH2KAS1KN-bacon-boot-debuggable-b19ebe021f.img with the sideload and get adb working over usb?
Thanks
hibernick said:
can I flash this cm-13.1-ZNH2KAS1KN-bacon-boot-debuggable-b19ebe021f.img with the sideload and get adb working over usb?
Thanks
Click to expand...
Click to collapse
You can't adb sideload .img or a partition.
You have to use fastboot.
Code:
fastboot flash boot boot_img_name.img
or
Code:
fastboot boot boot_img_name.img
saurav007 said:
You can't adb sideload .img or a partition. You have to use fastboot.
Click to expand...
Click to collapse
Yes but then I have to unlock my bootloader first. And unlocking bootloader erase all the user files....
Is there other way to to run cm-13.1-ZNH2KAS1KN-bacon-boot-debuggable-b19ebe021f.img on the devise?
Hello there,
this is my first thread so maybe I can make some mistakes.
I tried to install Lineage in my Mi A1, with their wiki guide. Then the device bootlooped, I tried with a lot of guides, tutorials, I used Cosmic Dan's TWRP for formating partitions, installed vendor images...
But the phone was ****ed up... I tried to install a fastboot ROM but the phone didnt have signal, or it was stucked in the SIM password...
If someone is facing some similar problem, I would like to help you. Like I said before, I tried with a lot of methods, a lot of different recoveries, I tried https://forum.xda-developers.com/mi-a1/development/twrp-stock-8-1-0-t3856328 this one too, all tipes of fastboot or TWRP stock ROMs... but no clue of how solving it.
So THIS is the only way(for me at least) for solving it. It is in Indian, but you can follow his steps if you flashed any ROM before, is quite easy.
1. - You need your phone to be unlocked, if you dont have it, just use the command "fastboot oem unlock" while you are in fastboot mode. There are plenty of guides for this.
2- You have to run MiFlash. If you dont have it HERE you have the version that I used.
3. Download and extract THIS Rom. Then copy the link to MiFlash like he does in the video, or browse for the folder.
4. Plug your phone in Fastboot mode, and click reflresh, till you see a device in the MiFlash tool. Check that you have the "clean all" option in the bottom of the app. DONT CHOOSE THE LOCK ONE.
After this your phone still wont work, dont worry, just press Vol Down+Power again till' the phone enters fastboot again.
5. Download TWRP and boot the phone with the recovery using the command "bootloader boot twrp-3.2.3-1-tissot.img.html" in the adb folder(same steps that the other TWRP versions with temporal boot)
6. Download this Backup and copy the folder inside the 7z to the device(not to the sd) and replace the TWRP folder.
7. Use the restore option in TWRP for restoring the backup, and the go to Reboot -> Bootloader and you will be in Fastbood mode again.
8. REPEAT the "4" step, but THIS TIME use the FLASH ALL AND LOCK option.
I hope it works!
Ps. Im from Spain, so it could be some grammatical mistakes xd
Hi,
My phone is actually dying and I don't know how to recover it this time.
I had a perfectly working setup with latest weekly update of Xiaomi eu MIUI , TWRP and magisk, and know even fastboot is not responding.
I usually don't like when people say that, but I think a malware did it, as my apps started not responding in a few minutes, and the reboot finished the job.
Now it won't boot anymore, when it's plug the notification led is red, and fastboot is detected but commands are stuck.
Also, TWRP is neither accessible from "power + vol up" since last miui eu update, nor from fastboot since the "accident"
If someone have any advice on how to unlock fastboot, flash back the rom or any other way to recover my phone, please help
Also, if you want to know the rest of the story, it's here...
I was using my phone as usual, trying to setup a bridge openvpn connection. (like everyone :laugh: )
The issue is that the only app claiming to do that isn't free, and I want to be sure I can make it work before spending any money.
So I tried to patch it and different apks (I know it's bad...), and while transferring an apk from my laptop to my phone, I noticed the transfer was kinda slow for a few seconds (nothing worrying, but unusual)
Then some of my apps didn't want to launch and, back to the app drawer, most of my apps had their package names, with no icons...
It was at this moment Jackson I knew I screwed up...
I then tried rebooting, and the phone stayed a few minutes on the MIUI screen, then shut off.
After a reboot, I noticed the red led, the absence of boot animation, and the bootloop.
Obviously, if I had a fastboot access, it would be easy to boot on TWRP and then flash back my rom properly but I can't...
EDIT: to make this clearer (I know the post above is a little bit messy), I have the following issues:
- No access to TWRP (for flashing)
- Fastboot is accessible but broken enough so flash/boot to twrp is not possible
- I just though of EDL mode, but "fastboot oem edl" doesn't seems to work
- I prefer to avoid opening my phone (to access to the EDL test points)
EDIT2: You can't flash anything in EDL mode without specific autorisations from xiaomi, so this mode becomes way more useless than on my previous Mi A1. I managed to miraculously flash some things by using miflash in fastboot mode. Maybe working on a windows os instead of gnu/linux helped somehow...
Thelm76 said:
Hi,
My phone is actually dying and I don't know how to recover it this time.
I had a perfectly working setup with latest weekly update of Xiaomi eu MIUI , TWRP and magisk, and know even fastboot is not responding.
I usually don't like when people say that, but I think a malware did it, as my apps started not responding in a few minutes, and the reboot finished the job.
Now it won't boot anymore, when it's plug the notification led is red, and fastboot is detected but commands are stuck.
Also, TWRP is neither accessible from "power + vol up" since last miui eu update, nor from fastboot since the "accident"
If someone have any advice on how to unlock fastboot, flash back the rom or any other way to recover my phone, please help
Also, if you want to know the rest of the story, it's here...
I was using my phone as usual, trying to setup a bridge openvpn connection. (like everyone :laugh: )
The issue is that the only app claiming to do that isn't free, and I want to be sure I can make it work before spending any money.
So I tried to patch it and different apks (I know it's bad...), and while transferring an apk from my laptop to my phone, I noticed the transfer was kinda slow for a few seconds (nothing worrying, but unusual)
Then some of my apps didn't want to launch and, back to the app drawer, most of my apps had their package names, with no icons...
It was at this moment Jackson I knew I screwed up...
I then tried rebooting, and the phone stayed a few minutes on the MIUI screen, then shut off.
After a reboot, I noticed the red led, the absence of boot animation, and the bootloop.
Obviously, if I had a fastboot access, it would be easy to boot on TWRP and then flash back my rom properly but I can't...
Click to expand...
Click to collapse
Hi
I had a similar situation
I comfigured an app and during configuration the phone start framing
I rebooted and stucked at miui screen
I tried to reboot in recovery ,nothing
I downloaded latest miui for europe 12.0.3 and mi flash
For me fastboot worked to flash latest firmware from xiaomi
And now is working and my bootloader is locked
Thelm76 said:
Hi,
My phone is actually dying and I don't know how to recover it this time.
[/hide]
Click to expand...
Click to collapse
Xiaomi.eu has TWRP issue...
Go to https://www.androidfilehost.com/?w=files&flid=50678 and find your recovery (lmi) and flash it with fastboot and boot to recovery.
fastboot flash recovery twrp.img
fastboot boot twrp.img
Now download the new ROM 20.10.16, push it to the internet storage and install it dirty... Wipe Cache and reboot....
My problem is almost same, i unlock the bootloader to flash xiaomi.eu rom from global rom, unlocking and flashing custom recovery was done smoothly, when i tried to flash xiaomi.eu rom version 12.0.8 it booted back to recovery, and i format the data partition and booted to system, and same result. I tried global its same result.
Then i tried miflash tool, " antirollback error ".
Now i don't know what to do. Hope my precious poco f2 pro is not bricked, coz i can still manage to boot in custom recovery, and can use miflash tool but error.
Can someone out there help me please. Thanks in advance.
Eldybug said:
My problem is almost same, i unlock the bootloader to flash xiaomi.eu rom from global rom, unlocking and flashing custom recovery was done smoothly, when i tried to flash xiaomi.eu rom version 12.0.8 it booted back to recovery, and i format the data partition and booted to system, and same result. I tried global its same result.
Then i tried miflash tool, " antirollback error ".
Now i don't know what to do. Hope my precious poco f2 pro is not bricked, coz i can still manage to boot in custom recovery, and can use miflash tool but error.
Can someone out there help me please. Thanks in advance.
Click to expand...
Click to collapse
Since you have access to a properly working fastboot and recovery, I believe there is always a way to recover your phone.
I'll be glad to help you but for now, I'm more focused on my issue.
Only thing, while using miflash, be careful to never lock your bootloader since you would have to open your phone to access EDL mode in case of bootloop
(but you can lock it afterwards if you want)
Enricosteph said:
Xiaomi.eu has TWRP issue...
Go to https://www.androidfilehost.com/?w=files&flid=50678 and find your recovery (lmi) and flash it with fastboot and boot to recovery.
fastboot flash recovery twrp.img
fastboot boot twrp.img
Now download the new ROM 20.10.16, push it to the internet storage and install it dirty... Wipe Cache and reboot....
Click to expand...
Click to collapse
Well, the main issue here is that fastboot seems to be broken too...
i found this for you on the LOS rom for poco f2 pro (am not the autor) this is for the "Anti-rollback error" (i hope that can help you):
romabah said:
Gentlemen with EU versions of Poco F2 pro, could you help me out?
Right now i am running 12.0.2.0 QJKEUXM.
To flash Lineage i first need to flash MIUI V12.0.3.0.QJKMIXM via MiFlash. I tried to do that but got an Anti-rollback error.
Checking via fastboot i saw that my phones anti rollback value is 1, but MIUI V12.0.3.0.QJKMIXM firmware has an anti rollback of 0.
Some folks say to delete first 5-6 lines in text editor from .bat file, but at the same time people tell everywhere to NOT flash firmware with lower value that your current anti rollback.
Any advice? How did other EU folks fix this?
Edit: I fixed it! I will NOT and cannot claim that this will fix all rollback error's, but it fixed mine.
0) This is applicable to fastboot version of MIUI V12.0.3.0.QJKMIXM (aka tgz file that you need to extract twice)
1) Move the extracted firmware directory imi_global_images_V12.0.3.......ets.ets. ( map with flash_all.bat, images ) to C: directory and rename to something short, like xiaomiFirm.
This will solve a lot of weird error's as MiFlash doesnt like long directories
2) Within the moved map open flash_all.bat with text editor and delete everything starting and including "::check anti_version" to and including "echo %..."
This removes the anti rollback check somehow. The reason for only editing flash_all.bat is because this is the .bat file that is run when you choose clean all option in MiFlash, i assume you dont want to clean all and lock now do you?
3) After finishing flashing mine gave error Not catch checkpoint flash is not done, but booted normally. Gave me a heart attack.
Sanity check: When running cmd "fastboot getvar anti" it returned "anti: 1"
Meaning i just flashed a ROM with anti of 0 on a phone with a anti value of 1. At least i believe so.
In any case, thank all for giving feedback for other ways of fixing this.
Click to expand...
Click to collapse
I'll try to make a type C deep flash cable to flash fastboot, and edit this message to explain if this works
Thelm76 said:
Well, the main issue here is that fastboot seems to be broken too...
Click to expand...
Click to collapse
Try to hold down only Vol Down and connect it to your computer
Enricosteph said:
Try to hold down only Vol Down and connect it to your computer
Click to expand...
Click to collapse
I don't know if this was my cable or fastboot oem edl, but windows recognised the phone as qualcomm qdloader 9008. I'll now try to update fastboot, install twrp and check the extent of the damages.
Fangstergangsta said:
i found this for you on the LOS rom for poco f2 pro (am not the autor) this is for the "Anti-rollback error" (i hope that can help you):
Click to expand...
Click to collapse
Indeed, OP, try to flash everything from the start thep by step.
You must stop therapeutic relentlessness!!!
Just plug out the charger and let him die softly...
Put him back in his sweet box after his last breathe
Bury him in your garden with a decent burial : he deserve it!!!!
It's HIS TIME, dude....
Regards
Mastakony said:
You must stop therapeutic relentlessness!!!
Just plug out the charger and let him die softly...
Put him back in his sweet box after his last breathe
Bury him in your garden with a decent burial : he deserve it!!!!
It's HIS TIME, dude....
Regards
Click to expand...
Click to collapse
Haha it's not therapeutic relentlessness when you're sure it will live again in a few days (and fully working!)
It just need a good memory wipe and android replacement
As I managed to get to emergency mode, I can now easily replace its software
EDIT: I didn't know that for these xiaomi devices, you need very specific autorisations to flash something with EDL... Fortunately, after messing around with miflash, I managed to unlock myself out of this infinite loop
As I managed to get to emergency mode, I can now easily replace its software
Click to expand...
Click to collapse
How are you going to flash the software?
Well,
By using edl mode and miflash, I got some errors as I was not authorised to do this operation, so I rebooted to fastboot, reused miflash, and I don't know which kind of magic did that but after some files flashed and an error, I was able to boot on TWRP. With this done, I tried to keep my data but didn't worked, and as I have everything constantly backup, I dicided to do a flashall.
now, I think I have a good MIUI base to flash MIUI EU back
Thelm76 said:
Well,
By using edl mode and miflash, I got some errors as I was not authorised to do this operation, so I rebooted to fastboot, reused miflash, and I don't know which kind of magic did that but after some files flashed and an error, I was able to boot on TWRP. With this done, I tried to keep my data but didn't worked, and as I have everything constantly backup, I dicided to do a flashall.
now, I think I have a good MIUI base to flash MIUI EU back
Click to expand...
Click to collapse
I have the same situation plus no fastboot or recovery at all.. Please tell me how did you resolve it?
ghannaiem said:
I have the same situation plus no fastboot or recovery at all.. Please tell me how did you resolve it?
Click to expand...
Click to collapse
Is the phone detected by the pc in usb?
And when you press power+ sound + or - What is happening?
NOSS8 said:
Is the phone detected by the pc in usb?
And when you press power+ sound + or - What is happening?
Click to expand...
Click to collapse
Yes , detected by usb but as qcom 9008,
And when holding down power button with + or - vol it restarts again to 9008 .
So it is not detected by any means, but only detected in edl mode
ghannaiem said:
Yes , detected by usb but as qcom 9008,
And when holding down power button with + or - vol it restarts again to 9008 .
So it is not detected by any means, but only detected in edl mode
Click to expand...
Click to collapse
how did it happen?
My imei got lost so I tried to flash eng rom through MI flash to fix it. It flashes all except certain file called (aop. Mbn) so I tried to flash it by cmd commands via fastboot and then the phone bricked.. No booting to fastboot anymore , no recovery. even with disconnecting battery and reconnecting again... Phone only recognized in Edl mode and when flashing through MI flash it asks for edl authorization... Account login successful but then flash fail cuz account is not authorized. So I think The only solution will be authorized account or patched prog_ufs file
Okay so yesterday I decided to finally try to install TWRP to flash a custom rom on the system, but never thought it would give so much headache. My drivers were bad, the system locked and android 11 updating making the phone all sorts of bugs, I was anxious to get rid of it, and I did somehow. I was unable to flash TWRP into the recovery as the system partition type is different than usual for it seems, but the recovery partition was all weird, "no command" was stuck in the screen even after a hard reset through there. So I got Magisk and got Root and used Smart Flash to install TWRP through the running system and it landed successful. But when going to the recovery the TWRP screen was flickering, but I could send ADB commands yet and boot normally, I just couldn't access the recovery functions yet. So I flashed a different version of the TWRP with the IMG and the zip folder and nothing worked then I realized that maybe I should erase the partition before flashing it and then the murder. I found a tutorial on erasing stuff, but the whole process cost me more than twelve hours as I messed with so many things and was kinda learning the hows and dos.
But then I saw the command "fastboot erase system -w" that was a shortcut for all cleanup processes and I was wanting to wipe it again even to recover my google backup and be able to use my messenger apps. But it did erase, of course, the whole system and everything, simply destroying everything, but yet stuck in the fastboot screen. What I did? Well, I downloaded the TGRZ of an older version of xiaomi mi a3 firmware, the android 10, as I was tired and thought that maybe if I downgraded it I would get my phone to get rid of android 11 bugs and sleep for good till tomorrow, that is today. I ran the script to wipe anything and install the system over it and it did successfully, then the message "successfully installed, press any key to finish" but then the prompt closed and the phone tried to reboot but fell into a hard brick. The computer recognizes the device as the name "QUSB_BULK_CID:0411_SN:EFCF04FD" and the hardware ID "USB\VID_05C6&PID_9008" matches the original.
So is there anything I could do yet? Phone warranty ended in january and that's why I tried that process, it is any worth?
BillyWroth said:
Okay so yesterday I decided to finally try to install TWRP to flash a custom rom on the system, but never thought it would give so much headache. My drivers were bad, the system locked and android 11 updating making the phone all sorts of bugs, I was anxious to get rid of it, and I did somehow. I was unable to flash TWRP into the recovery as the system partition type is different than usual for it seems, but the recovery partition was all weird, "no command" was stuck in the screen even after a hard reset through there. So I got Magisk and got Root and used Smart Flash to install TWRP through the running system and it landed successful. But when going to the recovery the TWRP screen was flickering, but I could send ADB commands yet and boot normally, I just couldn't access the recovery functions yet. So I flashed a different version of the TWRP with the IMG and the zip folder and nothing worked then I realized that maybe I should erase the partition before flashing it and then the murder. I found a tutorial on erasing stuff, but the whole process cost me more than twelve hours as I messed with so many things and was kinda learning the hows and dos.
But then I saw the command "fastboot erase system -w" that was a shortcut for all cleanup processes and I was wanting to wipe it again even to recover my google backup and be able to use my messenger apps. But it did erase, of course, the whole system and everything, simply destroying everything, but yet stuck in the fastboot screen. What I did? Well, I downloaded the TGRZ of an older version of xiaomi mi a3 firmware, the android 10, as I was tired and thought that maybe if I downgraded it I would get my phone to get rid of android 11 bugs and sleep for good till tomorrow, that is today. I ran the script to wipe anything and install the system over it and it did successfully, then the message "successfully installed, press any key to finish" but then the prompt closed and the phone tried to reboot but fell into a hard brick. The computer recognizes the device as the name "QUSB_BULK_CID:0411_SN:EFCF04FD" and the hardware ID "USB\VID_05C6&PID_9008" matches the original.
So is there anything I could do yet? Phone warranty ended in january and that's why I tried that process, it is any worth?
Click to expand...
Click to collapse
You should never try to install software for another board (mi mix 3 global is codenamed "perseus")...
If you are unable to reach fastboot and recovery, you may refer to this, since it sounds like your phone is in EDL mode:
Reboot to EDL mode from FASTBOOT!
Reboot to EDL mode from FASTBOOT! No more Test Point Method needed Technical Details: Redmi Note 3 support rebooting to EDL in Android Bootloader aboot module (the "reboot-edl" command) but fastboot utility doesn't recognize "reboot-edl" in the...
forum.xda-developers.com
I never encountered this issue so only do this if you're absolutely sure you have no other means of flashing anything on it (i.e. through fastboot), and use the appropriate firmware at all times for your specific model
CriGiu said:
You should never try to install software for another board (mi mix 3 global is codenamed "perseus")...
If you are unable to reach fastboot and recovery, you may refer to this, since it sounds like your phone is in EDL mode:
Reboot to EDL mode from FASTBOOT!
Reboot to EDL mode from FASTBOOT! No more Test Point Method needed Technical Details: Redmi Note 3 support rebooting to EDL in Android Bootloader aboot module (the "reboot-edl" command) but fastboot utility doesn't recognize "reboot-edl" in the...
forum.xda-developers.com
I never encountered this issue so only do this if you're absolutely sure you have no other means of flashing anything on it (i.e. through fastboot), and use the appropriate firmware at all times for your specific model
Click to expand...
Click to collapse
well it seems I recovered it back, I bricked it and somehow it just got into EDL mode without cable or opening it up. So I found a tutorial back on reddit showing how use GFIL to install the stock rom back. I used android 10 stock rom before bricking it, but as I just flashed everything on empty partitions it didn't work, it seems that the Qualcomm setup needs some kind of previous work to set everything up. Anyways I managed to boot it, but now I'm aware that I should use Lineage recovery instead of TWRP as Mi A3 support is lacking, that's why after installing it I got it flickering (no compatible version with the latest Android 11 firmware).
BillyWroth said:
well it seems I recovered it back, I bricked it and somehow it just got into EDL mode without cable or opening it up. So I found a tutorial back on reddit showing how use GFIL to install the stock rom back. I used android 10 stock rom before bricking it, but as I just flashed everything on empty partitions it didn't work, it seems that the Qualcomm setup needs some kind of previous work to set everything up. Anyways I managed to boot it, but now I'm aware that I should use Lineage recovery instead of TWRP as Mi A3 support is lacking, that's why after installing it I got it flickering (no compatible version with the latest Android 11 firmware).
Click to expand...
Click to collapse
hello, im having maybe a similiar case with my phone (in this case its a MI A3) i installed "succefully" evolution x 6.3 on my phone and everthing was ok with a few bugs, the only problem was that mi cannot connect to internet, so i decided to restart the phone and now my phone just don't turn on, the power button don't respond and i cannot start up my phone and its just a black screen, if u remeber ¿can u pass the tutorial that u saw on reddit? maybe it can help me
I tried backup my data (partition) on the Oneplus Nord by temporarily loading a custom recovery: TWRP.
In FastBoot Mode I executed "fastboot boot twrp.img" with the newest files that I found here: https://twrp.me/oneplus/oneplusnord.html
twrp-3.7.0_12-0-avicii.img
This did not work, the screen just got stuck saying: "1+ Fastboot Mode"
It does not progress from there, I tried different versions, Euro, American, etc.
Now the device is not booting anymore. I only get to the recovery screen where I can choose the language. Here a cryptic msg. says: "kindly reminder system error after select language ..."
What can I do to boot the device back up again?
Maybe flash the boot image: "fastboot flash boot boot.img"
Which boot image should I use?
First off, if you had it on android 12, then it didn’t work because custom recoveries don’t work on the OOS 12/ Color OS 12.
To fix the issue, try booting to recovery (fastboot reboot recovery) and on the phone wipe the data, if that doesn’t work, try doing fastboot reboot fastboot, it will (atleast supposed to) bring you to fastbootd, you gotta do the same thing, wipe data and if THAT doesn’t work too… congrats! You bricked your phone
You just need to flash the OS manually using a fastboot rom thingy; https://forum.xda-developers.com/t/...stock-fastboot-roms-for-oneplus-nord.4142153/
If none of those work, reply to this message I’ll show you the one for hard bricked phones.. technically the last one I showed was for hard bricked but not 100%
Hope this helps!
Hafted said:
First off, if you had it on android 12, then it didn’t work because custom recoveries don’t work on the OOS 12/ Color OS 12.
To fix the issue, try booting to recovery (fastboot reboot recovery) and on the phone wipe the data, if that doesn’t work, try doing fastboot reboot fastboot, it will (atleast supposed to) bring you to fastbootd, you gotta do the same thing, wipe data and if THAT doesn’t work too… congrats! You bricked your phone
You just need to flash the OS manually using a fastboot rom thingy; https://forum.xda-developers.com/t/...stock-fastboot-roms-for-oneplus-nord.4142153/
If none of those work, reply to this message I’ll show you the one for hard bricked phones.. technically the last one I showed was for hard bricked but not 100%
Hope this helps!
Click to expand...
Click to collapse
Thanks a lot, I will give it a try.
And of course it is Android 12. And of course, I had no idea that I can't load TWRP anymore.
I have potentially a lot of data to loos, is there any way to backup the data partition before wiping?
Drift18 said:
Thanks a lot, I will give it a try.
And of course it is Android 12. And of course, I had no idea that I can't load TWRP anymore.
I have potentially a lot of data to loos, is there any way to backup the data partition before wiping?
Click to expand...
Click to collapse
I’m not sure, don’t think so..
Hafted said:
I’m not sure, don’t think so..
Click to expand...
Click to collapse
Oh boy I got it back up!!!
I flashed slot b, apparently there is a slot a that works as sort of a backup.
Check current slot:
fastboot getvar current-slot
> current-slot: b
fastboot --set-active=a
fastboot reboot
Voila.
I still would like to backup the partition though.