Database Info

Houston we have a problem

Sorry mods if this is not the way im suppose to ask but i am leaving on a road trip in like 6 hours and I need my phone functional.
That being said I flashed anryls new 6.5 rom and thena couple others and then back to the stock 6.1 att rom etc... the problem is all of a sudden i have no data!!!!!! after running the settings cabs etc... nothing, for that matter I have not had to do anything but use the connection setup up until today.
Bottom line, I need help please, anyone, everyone, I will be screwed if I cannot access my email for several days so any help is appreciated.
THANKS

swtaltima said:
Sorry mods if this is not the way im suppose to ask but i am leaving on a road trip in like 6 hours and I need my phone functional.
That being said I flashed anryls new 6.5 rom and thena couple others and then back to the stock 6.1 att rom etc... the problem is all of a sudden i have no data!!!!!! after running the settings cabs etc... nothing, for that matter I have not had to do anything but use the connection setup up until today.
Bottom line, I need help please, anyone, everyone, I will be screwed if I cannot access my email for several days so any help is appreciated.
THANKS
Click to expand...
Click to collapse
I've had a similiar problem when flashing and found that if I REMOVED THE SD CARD IMMEDIALTY AFTER THE FLASH IE BEFORE STARTNG TO SET UP THE PHONE SCREEN and installed nothing else but just set the phone up with my e-mail settings etc then it started working ok - worth a try

tinmanuk said:
I've had a similiar problem when flashing and found that if I REMOVED THE SD CARD IMMEDIALTY AFTER THE FLASH IE BEFORE STARTNG TO SET UP THE PHONE SCREEN and installed nothing else but just set the phone up with my e-mail settings etc then it started working ok - worth a try
Click to expand...
Click to collapse
already tried it brother

If you want your phone to be reliable on your trip then don't use 6.5. Just to be safe I would flash stock rom then PDACornerUltimate V19 then hard reset. Keep all your CABs on your SD card incase you have to do a hard reset on the road. But 6.1 is more stable than any 6.5 rom

Fingerlickin said:
If you want your phone to be reliable on your trip then don't use 6.5. Just to be safe I would flash stock rom then PDACornerUltimate V19 then hard reset. Keep all your CABs on your SD card incase you have to do a hard reset on the road. But 6.1 is more stable than any 6.5 rom
Click to expand...
Click to collapse
Unfortunatley i did that too, about four times

http://www.youtube.com/watch?v=YIDrtVE5zUY
Sorry, stuck in my head, saw Houston and immediately thought "JUMP ON IT! JUMP ON IT!"
Tried different radios? Even though you went ATT Stock, try it.
You could always look up the individual settings and try it, check proxy stuff too.

Possible false alarm, it might be the retards at AT&T, I am on the phone with them now so we'll see what they did because with my sim in my g/f phone it still wont allow data use. I will post after I get off the phone, hopefully with a resolution.

don't let on that you flash custom, they'll lay the hammer down.

I'm a bit unclear on whether or not you went into start/settings to make sure everything was configured correctly but if you didn't, I just made this video it just shows how to make sure everything is configured correctly for AT&T Internet since it is fairly confusing. Hopefully this helps
http://www.youtube.com/watch?v=slvlgpLm5sY

Connection Settings
Make sure your connection setting has proxy turned off, if it does not then turn it off and soft reset and it should work, hope this helps!

Similar but different
I am having a problem with my microsd card also. In setting-system-memory-storage card-it says (not installed). I put it in the computer and it said currupted/not readable. Is there a way to fixed this.

What does that have to do with this guys problem? LOL this isn't even in the proper forum..
WARNING WARNING
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

[Q] Is it possible to add CSC from SGS to SNS (Nexus S)?

the phone is working fine
except instead of showing the Name of my cell phone provider, it only shows the tower ID number.
I was supposed to see:
Wind (Home)
or
Wind (Away)
they show up properly on my SGS and XT720
Ironically, with the SNS, i did not even have to configure the APN settings, it automatically got both the MMS and Internet APN settings.
kinda funny if you ask me, it knows the Wind internet and multimedia settings but can't report the tower names
if i use the Wind (Away) towers i get charged roaming
so ideally i'd like to only use Wind (Home) similar to Tmobile Zones towers for my 3G and voice, to not see a huge bill at the end of the month

This thread on Howard Forums might interest you if you haven't found it already. Seems like the difference is that Wind sends out number instead of name if I read it correctly.
You might be able to edit the eri.xml file to deal with this, as instructed in this thread on xda for AOSP roms.
As far as CSC goes, I don't think the NS uses that. I've never seen it mentioned in discussions about other devices besides the Galaxy S line of phones using Samsung ROMs.
P.S. - be careful messing with the frameworks apk. I made a bad edit to the one on my i9000 once and it wouldn't boot. Easy enough to fix by replacing with a good copy, though.

Thanks for those 2 links
I'll check them out.
That's very helpful, if it's a simple edit of the file
I've been busy jumping between the 3 forum, and fixing the SGS i9000m to work properly, which i just got back yesterday, and it pretty much died on me right away after upgrading to JL2 and restoring only the backup for user app+user app settings (no system app/data restored)

Heh I've been wondering about this too... but seeing "302490" instead of "Wind (Home)" doesn't really bother me that much... I'll know if it's Wind Away when the number is different lol.

dinan said:
Heh I've been wondering about this too... but seeing "302490" instead of "Wind (Home)" doesn't really bother me that much... I'll know if it's Wind Away when the number is different lol.
Click to expand...
Click to collapse
Yeah, that's what some in the Howard Forums say; as long as they know they're not roaming. When you're on Wind Away, does the "roaming" indicator show? The framework shows there's a flag for it.
I would be with Allgamer myself; I'd like the proper carrier name to show.

well New Year eve is here
and the "long weekend" is starting soon
if i have time after the parties and stuff to work on the quick fix, i'll upload the file to share for the rest of the XDAers on Wind Mobile

There's an easy fix for that.
On the dialing screen, dial *#*#4636#*#*
Phone information->choose WCDMA only (Wind runs on 3G only).

mingkee said:
There's an easy fix for that.
On the dialing screen, dial *#*#4636#*#*
Phone information->choose WCDMA only (Wind runs on 3G only).
Click to expand...
Click to collapse
this is a Good solution.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
however, it still needs some Cosmetic "visual" fix for eyes candy
and what distortedloop pointed out seems to be the quickest fix

AllGamer said:
however, it still needs some Cosmetic "visual" fix for eyes candy
and what distortedloop pointed out seems to be the quickest fix
Click to expand...
Click to collapse
Assuming it actually works...
Looking forward to hearing the results, even though the issue doesn't affect me.

i spend time trying a few this morning and nothing....
because there is only 1 SPACE !!!!! available to Hex Edit a letter into the xml file
i tried the other method they mentioned further down into the topic, and it was not compatible
good thing i was flashing my phone a few times.
running TW ROM right now.
so in the end, it is Do able, but we only get 1 letter out of it.... which IMO is worse than seeing the full row of numbers 302490

[Q] OPO flashed on CM11s - Mobile Data issues

[/ATTACH]Hello my friends,
I really need your help now. Since the Oneplus One is so new there are only few people having experience with the smartphone and it's Problems. I searched the whole Internet but dit not find anyone with the OPO who has the same Problem as me..
My OPO is the chinese Version and i flashed it without PC on CM11s.
But I found that my Smartphone has got no mobile Internet and also I am not able to call someone.
After I saw this I flashed the phone two more times, but with my PC and fastboot. I used the Images here: https: //cyngn.com /products /oneplusone/
Once I flashed my phone with PC and fastboot I got mobile data sometimes for about one or two minutes, after that it breaks down.
My APN's are the same with my Provider.
I tried to solve this Problem for the whole weekend, I now even consider selling the phone again..
It would be really really nice if someone is able to help me!
Best regards,
4p9xD
My phone Display:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

hi
I had a similar problem. I had a sim card trimmed with scissors and was too loose.
I replaced the card with a new one.
A problem, however, remained. Sometimes I can not call, sometimes not the Internet. It looks like something crashed and helps only restart.
You tried to upload the "modem chack"?

I have the same problem. I hope it is not something with hardware.

I don't know... could you check production date on the box?

Sounds like a kernel issue, did you flash the right one?
Sent from my One using XDA Premium 4 mobile app

What do you exactly mean saying rightone?

If you have a Chinese version then you need a kernel made for your phone.
Sent from my One using XDA Premium 4 mobile app

I instaled cm11s in fastboot according to instruction on this site. Can you show us which kernel we must use?

I'm exactly the same. I installed by the recovery and than two times through fastboot. ROM from the official site.

Another one here! I have exactly the same thread starter problem, 1 min after turn on the phone I cant call anymore or sending messages...
Right kernel? Can someone explaine? I have tryed to flash 3 version of CM11 and return back to ColorOS, the problem is not solved :|

the problem occurs on coloros? I can call but not always. The issue is when switching between frequencies - from internet 4G to gsm...
wyslane z OnePlus One

chriss2 said:
the problem occurs on coloros? I can call but not always. The issue is when switching between frequencies - from internet 4G to gsm...
Click to expand...
Click to collapse
And still no solutions?
Is possible that this is a hardware problem?

Bump!
Please help us boys, I have tried everything, I really dunno what to do

same problem
I'm having the same problem, the phone was working just fine when i first used it on ColorOs with voice calls working on 4g. however, as soon as I flashed CM11 it stopped working and I can only use 2g to make phone calls even though 4g internet works fine. I have flashed ColorOs but a rooted one, CM11 and other roms the problem is still there. If some one can find a solution for us I would be grateful.

if someone tried to flash modem hack... I've seen 3 versions...
wyslane z OnePlus One

the problem still occurs?
wyslane z OnePlus One

I have the same issue, after flashing to CM11s, its like the cell network is sick, turn on for a while, then off. when the phone is in the pocket (sleep) totally not network, and people cannot call in.
I flash back to Colour OS, more stable and 4G is working fine.

chriss2 said:
the problem occurs on coloros? I can call but not always. The issue is when switching between frequencies - from internet 4G to gsm...
wyslane z OnePlus One
Click to expand...
Click to collapse
If you didn't flash a new radio, then its probably a kernel issue.

Sorry where can i find the new radio for OPO...?
wyslane z OnePlus One

hi
I could not find radio.img for the OPO. I found the network settings through the code: *#*#4636#*#* and changed the settings.
was: TD-SCDMA, WCDMA and LTE
new: LTE / WCDMA
and see if it is ok...
original threads:
http://hippowise.com/how-to-permanently-enable-lte-on-android-4-2-2-nexus-4/
https://forums.oneplus.net/threads/4g-lte-issues-build-prop-edits-fixed-it.57071/

wifi calling?

Does the M Mix 2S support Wifi calling?
I'm in the UK and can't find anything about it.

i cant answer that but you can find a wifi calling setting in the settings if you search for it. Unfortunately it doesnt do anything as far as I can tell

Need some input...
So, I normally don't give a hoot about wifi calling, as the signal is normally super strong in my area. However, we have moved into a new building and now I desperately need VoWiFi.
This thread for the Poco F1, they were able to at least get the settings enabled on the device by editing the build.prop. I posed the question to see if they were on MIUI to get these working, but have not heard back. I have tried to edit the build.prop file on my own but essentially just end up with a paperweight at the end, having to wipe system and restore properly.
Hoping someone else may be able to provide some input on this. I am more than willing to flash my device multiple times in order to test this out. Anyone game for at least getting the toggles enabled to see if it works?

noobtoob said:
So, I normally don't give a hoot about wifi calling, as the signal is normally super strong in my area. However, we have moved into a new building and now I desperately need VoWiFi.
This thread for the Poco F1, they were able to at least get the settings enabled on the device by editing the build.prop. I posed the question to see if they were on MIUI to get these working, but have not heard back. I have tried to edit the build.prop file on my own but essentially just end up with a paperweight at the end, having to wipe system and restore properly.
Hoping someone else may be able to provide some input on this. I am more than willing to flash my device multiple times in order to test this out. Anyone game for at least getting the toggles enabled to see if it works?
Click to expand...
Click to collapse
I got the VoWifi option in Aosip Rom, maybe you can try that out

Flatric said:
I got the VoWifi option in Aosip Rom, maybe you can try that out
Click to expand...
Click to collapse
I have the options in settings, however the radios are disabled on the phone. If you dial *#*#4636#*#* - It will pull up the phone information window. If you click on phone information, you'll see all the radios greyed out and you cannot toggle them to enable.
What I am attempting is to edit the build.prop like they did in the Poco F1 thread to get the radios toggled to the on position. I am just so unqualified in that field that I need assistance, but willing to sacrifice my time and possibly soft bricking device several times for testing.
Edit: Been trying to upload this for ages. Gave up, here is the image url...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I don't want to clog this thread for now, but so far I have been making progress. I am also running AOSP, not MIUI, so that is a huge deal if I can manage to work it out.
https://forum.xda-developers.com/showpost.php?p=78365950&postcount=18
Was able to get the radios enabled, now I just need to get my PC to recognize the phone/com port in QPST. This thread has the guide for Poco F1. If I am able to get it done, I will create a guide in our section as well, of course full credits go to @der_Kief for this. Cross some fingers folks.
Click to expand...
Click to collapse
Edit: I was unable to get the device to work on WiFi calling on commercial-TMO settings following the guide above. With that said however they have all the US based carriers as options to enable the wifi calling slot. If anyone want to try it out, it may be worth a shot. I was able to get just as far running AOSP and MIUI, same behavior. VoLTE works great doing this, and at least on my money saving MVNO, I wasn't able to get it going. Someone on an actual T-Mobile plan may get theirs to work, I'm on MetroPCS.

try this
https://forum.xda-developers.com/poco-f1/how-to/guide-activate-vowifi-wlan-call-t3871263
it worked for me

Did you do the exact same steps but in a mix2s and it worked? I'm tempted

white43 said:
Does the M Mix 2S support Wifi calling?
I'm in the UK and can't find anything about it.
Click to expand...
Click to collapse
After disabling carrier check via a special code and making sure your provider has the service enabled it works. At least for the primary SIM.
Now if anyone know whether dual SIM WiFi calling is possible please enlighten us!

Unlimited hotspot.

I may have stumbled upon an unlimited hotspot method.
After rooting my tmobile OP7 pro, I edited systen/etc/apns-conf.xml from this thread.
After editing the file, it seems corrupted and I did not have data service.
I manually added a tmobile apn with dun and now i have unlimited hotspot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Someone else please test and confirm.

Has no one been interested to try unlimited tethering?

lol ? or you could just edit the file properly. I just edited it for TMobile unlimited hotspot for you. It works great for me. I am hoping you have the same luck. This file comes from OOS 9.5.11 and is edited by me. Place the file in /System/etc

So we are talking about unlimited data usage?

What benefits can this bring? Usually I change the phone every 3 years, because industry growth rates do not allow changing every year. However, oneplus 7 is so good that it changed its 5 version ahead of schedule

MesmerizingLake said:
What benefits can this bring? Usually I change the phone every 3 years, because industry growth rates do not allow changing every year. However, oneplus 7 is so good that it changed its 5 version ahead of schedule
Click to expand...
Click to collapse
Unlimited tethering to other devices and stops TMobile from throttling your tether speed regardless of your plan

necromnicon said:
lol ? or you could just edit the file properly. I just edited it for TMobile unlimited hotspot for you. It works great for me. I am hoping you have the same luck. This file comes from OOS 9.5.11 and is edited by me. Place the file in /System/etc
Click to expand...
Click to collapse
Do you think this would work on ROMs beside oxygen os?

wiswis said:
Do you think this would work on ROMs beside oxygen os?
Click to expand...
Click to collapse
Possibly. Try it and report back. The worst that will happen is you will not have data connection when you reboot and you can restore the original file to get it back.

i am hoping you can help me find the system/ext section to add the pat
hey thanks for posting your find in the forum i am hoping someone reads this and is willing to lend me a hand figuring out to to get mt hotspot working on my oneplus 7 pro, back in the days it was much easyier with the Wifi Tethering App, however, now im with Metro PCS and im unable to change my APN, can someone walk me through on where to go to add the DUN and get my hot spot working? I honestly dont know where to go to add it, and like i mentioned i am unable to change my apn. thanks in advance. Hence , I have the 1917 Variant of the Oneplus 7 pro, with Magisk Root , on version 9.0, with arter97 kernel. Please Help. Thanks.
necromnicon said:
lol or you could just edit the file properly. I just edited it for TMobile unlimited hotspot for you. It works great for me. I am hoping you have the same luck. This file comes from OOS 9.5.11 and is edited by me. Place the file in /System/etc
Click to expand...
Click to collapse

Does this work with any carrier?

Is there any other way to make this work without root

Destinatus said:
I may have stumbled upon an unlimited hotspot method.
After rooting my tmobile OP7 pro, I edited systen/etc/apns-conf.xml from this thread.
After editing the file, it seems corrupted and I did not have data service.
I manually added a tmobile apn with dun and now i have unlimited hotspot.
Someone else please test and confirm.
Click to expand...
Click to collapse
Dude, I tried this and immediately noticed a difference
I'm getting blazingly fast speeds. I'm in a kind of dead zone for my network, I don't even see Sprint antennas. And I'm getting better speeds then the hotspot I connect to.

this only works on Android 9 on 10 its moved ive posted the fix enabled Bluetooth tether also

ecompton59 said:
this only works on Android 9 on 10 its moved ive posted the fix enabled Bluetooth tether also
Click to expand...
Click to collapse
Where have you posted the fix? I'm on Verizon and rely on my phone for internet as I'm away from home almost all the time. I'm currently testing VPN Hotspot as that worked on the Pixel 2 and I've just gotten around to rooting the OnePlus 7 Pro.

https://forum.xda-developers.com/oneplus-7-pro/how-to/how-to-enable-dun-apn-t3966580

Can I ask how you guys are adding the apn type dun through the settings? I try and save it and get "This carrier does not support setting of apn type dun"

LowaEastSide said:
hey thanks for posting your find in the forum i am hoping someone reads this and is willing to lend me a hand figuring out to to get mt hotspot working on my oneplus 7 pro, back in the days it was much easyier with the Wifi Tethering App, however, now im with Metro PCS and im unable to change my APN, can someone walk me through on where to go to add the DUN and get my hot spot working? I honestly dont know where to go to add it, and like i mentioned i am unable to change my apn. thanks in advance. Hence , I have the 1917 Variant of the Oneplus 7 pro, with Magisk Root , on version 9.0, with arter97 kernel. Please Help. Thanks.
Click to expand...
Click to collapse
Did you get any feedback on this?

does tmobile find out?